From ac91e6b759f1eeeca559005e1c933b46d6a0272f Mon Sep 17 00:00:00 2001 From: Changqing Li Date: Tue, 21 Aug 2018 09:33:15 +0800 Subject: ntp: Upgrade 4.2.8p11 -> 4.2.8p12 1. Upgrade ntp to 4.2.8p12 2. Disable sntp service by default. Default NTPSERVER in config sntp is "ntpserver.example.org", just an example, not a valid address, if enable sntp service by default, it will startup failed during boot. It should be enabled after user set the correct config for sntp according to current config of ntpd. Signed-off-by: Changqing Li Signed-off-by: Khem Raj --- .../recipes-support/ntp/ntp_4.2.8p11.bb | 172 -------------------- .../recipes-support/ntp/ntp_4.2.8p12.bb | 173 +++++++++++++++++++++ 2 files changed, 173 insertions(+), 172 deletions(-) delete mode 100644 meta-networking/recipes-support/ntp/ntp_4.2.8p11.bb create mode 100644 meta-networking/recipes-support/ntp/ntp_4.2.8p12.bb diff --git a/meta-networking/recipes-support/ntp/ntp_4.2.8p11.bb b/meta-networking/recipes-support/ntp/ntp_4.2.8p11.bb deleted file mode 100644 index c698fa0494..0000000000 --- a/meta-networking/recipes-support/ntp/ntp_4.2.8p11.bb +++ /dev/null @@ -1,172 +0,0 @@ -SUMMARY = "Network Time Protocol daemon and utilities" -DESCRIPTION = "The Network Time Protocol (NTP) is used to \ -synchronize the time of a computer client or server to \ -another server or reference time source, such as a radio \ -or satellite receiver or modem." -HOMEPAGE = "http://support.ntp.org" -SECTION = "net" -LICENSE = "NTP" -LIC_FILES_CHKSUM = "file://COPYRIGHT;md5=e877a1d567a6a58996d2b66e3e387003" - -DEPENDS = "libevent" - -SRC_URI = "http://www.eecis.udel.edu/~ntp/ntp_spool/ntp4/ntp-4.2/ntp-${PV}.tar.gz \ - file://ntp-4.2.4_p6-nano.patch \ - file://ntpd \ - file://ntp.conf \ - file://ntpdate \ - file://ntpdate.default \ - file://ntpdate.service \ - file://ntpd.service \ - file://sntp.service \ - file://sntp \ - file://ntpd.list \ -" - -SRC_URI[md5sum] = "00950ca2855579541896513e78295361" -SRC_URI[sha256sum] = "f14a39f753688252d683ff907035ffff106ba8d3db21309b742e09b5c3cd278e" - -inherit autotools update-rc.d useradd systemd pkgconfig - -# The ac_cv_header_readline_history is to stop ntpdc depending on either -# readline or curses -EXTRA_OECONF += "--with-net-snmp-config=no \ - --without-ntpsnmpd \ - ac_cv_header_readline_history_h=no \ - --with-yielding_select=yes \ - --with-locfile=redhat \ - --without-rpath \ - " -CFLAGS_append = " -DPTYS_ARE_GETPT -DPTYS_ARE_SEARCHED" - -USERADD_PACKAGES = "${PN}" -NTP_USER_HOME ?= "/var/lib/ntp" -USERADD_PARAM_${PN} = "--system --home-dir ${NTP_USER_HOME} \ - --no-create-home \ - --shell /bin/false --user-group ntp" - -# NB: debug is default-enabled by NTP; keep it default-enabled here. -PACKAGECONFIG ??= "cap debug refclocks openssl \ - ${@bb.utils.filter('DISTRO_FEATURES', 'ipv6', d)} \ -" -PACKAGECONFIG[openssl] = "--with-openssl-libdir=${STAGING_LIBDIR} \ - --with-openssl-incdir=${STAGING_INCDIR} \ - --with-crypto, \ - --without-openssl --without-crypto, \ - openssl" -PACKAGECONFIG[cap] = "--enable-linuxcaps,--disable-linuxcaps,libcap" -PACKAGECONFIG[readline] = "--with-lineeditlibs,--without-lineeditlibs,readline" -PACKAGECONFIG[refclocks] = "--enable-all-clocks,--disable-all-clocks,pps-tools" -PACKAGECONFIG[debug] = "--enable-debugging,--disable-debugging" -PACKAGECONFIG[mdns] = "ac_cv_header_dns_sd_h=yes,ac_cv_header_dns_sd_h=no,mdns" -PACKAGECONFIG[ipv6] = "--enable-ipv6,--disable-ipv6," - -do_install_append() { - install -d ${D}${sysconfdir}/init.d - install -m 644 ${WORKDIR}/ntp.conf ${D}${sysconfdir} - install -m 755 ${WORKDIR}/ntpd ${D}${sysconfdir}/init.d - install -d ${D}${bindir} - install -m 755 ${WORKDIR}/ntpdate ${D}${bindir}/ntpdate-sync - - install -m 755 -d ${D}${NTP_USER_HOME} - chown ntp:ntp ${D}${NTP_USER_HOME} - - # Fix hardcoded paths in scripts - sed -i 's!/usr/sbin/!${sbindir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync - sed -i 's!/usr/bin/!${bindir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync - sed -i 's!/etc/!${sysconfdir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync - sed -i 's!/var/!${localstatedir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync - sed -i 's!^PATH=.*!PATH=${base_sbindir}:${base_bindir}:${sbindir}:${bindir}!' ${D}${bindir}/ntpdate-sync - sed -i '1s,#!.*perl -w,#! ${bindir}/env perl,' ${D}${sbindir}/ntptrace - sed -i '/use/i use warnings;' ${D}${sbindir}/ntptrace - sed -i '1s,#!.*perl,#! ${bindir}/env perl,' ${D}${sbindir}/ntp-wait - sed -i '/use/i use warnings;' ${D}${sbindir}/ntp-wait - sed -i '1s,#!.*perl -w,#! ${bindir}/env perl,' ${D}${sbindir}/calc_tickadj - sed -i '/use/i use warnings;' ${D}${sbindir}/calc_tickadj - - install -d ${D}/${sysconfdir}/default - install -m 644 ${WORKDIR}/ntpdate.default ${D}${sysconfdir}/default/ntpdate - install -m 0644 ${WORKDIR}/sntp ${D}${sysconfdir}/default/ - - install -d ${D}/${sysconfdir}/network/if-up.d - ln -s ${bindir}/ntpdate-sync ${D}/${sysconfdir}/network/if-up.d - - install -d ${D}${systemd_unitdir}/system - install -m 0644 ${WORKDIR}/ntpdate.service ${D}${systemd_unitdir}/system/ - install -m 0644 ${WORKDIR}/ntpd.service ${D}${systemd_unitdir}/system/ - install -m 0644 ${WORKDIR}/sntp.service ${D}${systemd_unitdir}/system/ - - install -d ${D}${systemd_unitdir}/ntp-units.d - install -m 0644 ${WORKDIR}/ntpd.list ${D}${systemd_unitdir}/ntp-units.d/60-ntpd.list - - # Remove an empty libexecdir. - rmdir --ignore-fail-on-non-empty ${D}${libexecdir} -} - -PACKAGES += "ntpdate sntp ${PN}-tickadj ${PN}-utils" -# NOTE: you don't need ntpdate, use "ntpd -q -g -x" - -# ntp originally includes tickadj. It's split off for inclusion in small firmware images on platforms -# with wonky clocks (e.g. OpenSlug) -RDEPENDS_${PN} = "${PN}-tickadj" -# ntpd require libgcc for execution -RDEPENDS_${PN} += "libgcc" -# Handle move from bin to utils package -RPROVIDES_${PN}-utils = "${PN}-bin" -RREPLACES_${PN}-utils = "${PN}-bin" -RCONFLICTS_${PN}-utils = "${PN}-bin" - -SYSTEMD_PACKAGES = "${PN} ntpdate sntp" -SYSTEMD_SERVICE_${PN} = "ntpd.service" -SYSTEMD_SERVICE_ntpdate = "ntpdate.service" -SYSTEMD_SERVICE_sntp = "sntp.service" - -RPROVIDES_${PN} += "${PN}-systemd" -RREPLACES_${PN} += "${PN}-systemd" -RCONFLICTS_${PN} += "${PN}-systemd" - -RPROVIDES_ntpdate += "ntpdate-systemd" -RREPLACES_ntpdate += "ntpdate-systemd" -RCONFLICTS_ntpdate += "ntpdate-systemd" - -RSUGGESTS_${PN} = "iana-etc" - -FILES_${PN} = "${sbindir}/ntpd.ntp ${sysconfdir}/ntp.conf ${sysconfdir}/init.d/ntpd ${libdir} \ - ${NTP_USER_HOME} \ - ${systemd_unitdir}/ntp-units.d/60-ntpd.list ${libexecdir}\ -" -FILES_${PN}-tickadj = "${sbindir}/tickadj" -FILES_${PN}-utils = "${sbindir} ${datadir}/ntp/lib" -RDEPENDS_${PN}-utils += "perl" -FILES_ntpdate = "${sbindir}/ntpdate \ - ${sysconfdir}/network/if-up.d/ntpdate-sync \ - ${bindir}/ntpdate-sync \ - ${sysconfdir}/default/ntpdate \ - ${systemd_unitdir}/system/ntpdate.service \ -" -FILES_sntp = "${sbindir}/sntp \ - ${sysconfdir}/default/sntp \ - ${systemd_unitdir}/system/sntp.service \ - " - -CONFFILES_${PN} = "${sysconfdir}/ntp.conf" -CONFFILES_ntpdate = "${sysconfdir}/default/ntpdate" - -INITSCRIPT_NAME = "ntpd" -# No dependencies, so just go in at the standard level (20) -INITSCRIPT_PARAMS = "defaults" - -pkg_postinst_ntpdate() { - if ! grep -q -s ntpdate $D/var/spool/cron/root; then - echo "adding crontab" - test -d $D/var/spool/cron || mkdir -p $D/var/spool/cron - echo "30 * * * * ${bindir}/ntpdate-sync silent" >> $D/var/spool/cron/root - fi -} - -inherit update-alternatives - -ALTERNATIVE_PRIORITY = "100" - -ALTERNATIVE_${PN} = "ntpd" -ALTERNATIVE_LINK_NAME[ntpd] = "${sbindir}/ntpd" diff --git a/meta-networking/recipes-support/ntp/ntp_4.2.8p12.bb b/meta-networking/recipes-support/ntp/ntp_4.2.8p12.bb new file mode 100644 index 0000000000..4254301153 --- /dev/null +++ b/meta-networking/recipes-support/ntp/ntp_4.2.8p12.bb @@ -0,0 +1,173 @@ +SUMMARY = "Network Time Protocol daemon and utilities" +DESCRIPTION = "The Network Time Protocol (NTP) is used to \ +synchronize the time of a computer client or server to \ +another server or reference time source, such as a radio \ +or satellite receiver or modem." +HOMEPAGE = "http://support.ntp.org" +SECTION = "net" +LICENSE = "NTP" +LIC_FILES_CHKSUM = "file://COPYRIGHT;md5=e877a1d567a6a58996d2b66e3e387003" + +DEPENDS = "libevent" + +SRC_URI = "http://www.eecis.udel.edu/~ntp/ntp_spool/ntp4/ntp-4.2/ntp-${PV}.tar.gz \ + file://ntp-4.2.4_p6-nano.patch \ + file://ntpd \ + file://ntp.conf \ + file://ntpdate \ + file://ntpdate.default \ + file://ntpdate.service \ + file://ntpd.service \ + file://sntp.service \ + file://sntp \ + file://ntpd.list \ +" + +SRC_URI[md5sum] = "1522d66574bae14abb2622746dad2bdc" +SRC_URI[sha256sum] = "709b222b5013d77d26bfff532b5ea470a8039497ef29d09363931c036cb30454" + +inherit autotools update-rc.d useradd systemd pkgconfig + +# The ac_cv_header_readline_history is to stop ntpdc depending on either +# readline or curses +EXTRA_OECONF += "--with-net-snmp-config=no \ + --without-ntpsnmpd \ + ac_cv_header_readline_history_h=no \ + --with-yielding_select=yes \ + --with-locfile=redhat \ + --without-rpath \ + " +CFLAGS_append = " -DPTYS_ARE_GETPT -DPTYS_ARE_SEARCHED" + +USERADD_PACKAGES = "${PN}" +NTP_USER_HOME ?= "/var/lib/ntp" +USERADD_PARAM_${PN} = "--system --home-dir ${NTP_USER_HOME} \ + --no-create-home \ + --shell /bin/false --user-group ntp" + +# NB: debug is default-enabled by NTP; keep it default-enabled here. +PACKAGECONFIG ??= "cap debug refclocks openssl \ + ${@bb.utils.filter('DISTRO_FEATURES', 'ipv6', d)} \ +" +PACKAGECONFIG[openssl] = "--with-openssl-libdir=${STAGING_LIBDIR} \ + --with-openssl-incdir=${STAGING_INCDIR} \ + --with-crypto, \ + --without-openssl --without-crypto, \ + openssl" +PACKAGECONFIG[cap] = "--enable-linuxcaps,--disable-linuxcaps,libcap" +PACKAGECONFIG[readline] = "--with-lineeditlibs,--without-lineeditlibs,readline" +PACKAGECONFIG[refclocks] = "--enable-all-clocks,--disable-all-clocks,pps-tools" +PACKAGECONFIG[debug] = "--enable-debugging,--disable-debugging" +PACKAGECONFIG[mdns] = "ac_cv_header_dns_sd_h=yes,ac_cv_header_dns_sd_h=no,mdns" +PACKAGECONFIG[ipv6] = "--enable-ipv6,--disable-ipv6," + +do_install_append() { + install -d ${D}${sysconfdir}/init.d + install -m 644 ${WORKDIR}/ntp.conf ${D}${sysconfdir} + install -m 755 ${WORKDIR}/ntpd ${D}${sysconfdir}/init.d + install -d ${D}${bindir} + install -m 755 ${WORKDIR}/ntpdate ${D}${bindir}/ntpdate-sync + + install -m 755 -d ${D}${NTP_USER_HOME} + chown ntp:ntp ${D}${NTP_USER_HOME} + + # Fix hardcoded paths in scripts + sed -i 's!/usr/sbin/!${sbindir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync + sed -i 's!/usr/bin/!${bindir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync + sed -i 's!/etc/!${sysconfdir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync + sed -i 's!/var/!${localstatedir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync + sed -i 's!^PATH=.*!PATH=${base_sbindir}:${base_bindir}:${sbindir}:${bindir}!' ${D}${bindir}/ntpdate-sync + sed -i '1s,#!.*perl -w,#! ${bindir}/env perl,' ${D}${sbindir}/ntptrace + sed -i '/use/i use warnings;' ${D}${sbindir}/ntptrace + sed -i '1s,#!.*perl,#! ${bindir}/env perl,' ${D}${sbindir}/ntp-wait + sed -i '/use/i use warnings;' ${D}${sbindir}/ntp-wait + sed -i '1s,#!.*perl -w,#! ${bindir}/env perl,' ${D}${sbindir}/calc_tickadj + sed -i '/use/i use warnings;' ${D}${sbindir}/calc_tickadj + + install -d ${D}/${sysconfdir}/default + install -m 644 ${WORKDIR}/ntpdate.default ${D}${sysconfdir}/default/ntpdate + install -m 0644 ${WORKDIR}/sntp ${D}${sysconfdir}/default/ + + install -d ${D}/${sysconfdir}/network/if-up.d + ln -s ${bindir}/ntpdate-sync ${D}/${sysconfdir}/network/if-up.d + + install -d ${D}${systemd_unitdir}/system + install -m 0644 ${WORKDIR}/ntpdate.service ${D}${systemd_unitdir}/system/ + install -m 0644 ${WORKDIR}/ntpd.service ${D}${systemd_unitdir}/system/ + install -m 0644 ${WORKDIR}/sntp.service ${D}${systemd_unitdir}/system/ + + install -d ${D}${systemd_unitdir}/ntp-units.d + install -m 0644 ${WORKDIR}/ntpd.list ${D}${systemd_unitdir}/ntp-units.d/60-ntpd.list + + # Remove an empty libexecdir. + rmdir --ignore-fail-on-non-empty ${D}${libexecdir} +} + +PACKAGES += "ntpdate sntp ${PN}-tickadj ${PN}-utils" +# NOTE: you don't need ntpdate, use "ntpd -q -g -x" + +# ntp originally includes tickadj. It's split off for inclusion in small firmware images on platforms +# with wonky clocks (e.g. OpenSlug) +RDEPENDS_${PN} = "${PN}-tickadj" +# ntpd require libgcc for execution +RDEPENDS_${PN} += "libgcc" +# Handle move from bin to utils package +RPROVIDES_${PN}-utils = "${PN}-bin" +RREPLACES_${PN}-utils = "${PN}-bin" +RCONFLICTS_${PN}-utils = "${PN}-bin" + +SYSTEMD_PACKAGES = "${PN} ntpdate sntp" +SYSTEMD_SERVICE_${PN} = "ntpd.service" +SYSTEMD_SERVICE_ntpdate = "ntpdate.service" +SYSTEMD_SERVICE_sntp = "sntp.service" +SYSTEMD_AUTO_ENABLE_sntp = "disable" + +RPROVIDES_${PN} += "${PN}-systemd" +RREPLACES_${PN} += "${PN}-systemd" +RCONFLICTS_${PN} += "${PN}-systemd" + +RPROVIDES_ntpdate += "ntpdate-systemd" +RREPLACES_ntpdate += "ntpdate-systemd" +RCONFLICTS_ntpdate += "ntpdate-systemd" + +RSUGGESTS_${PN} = "iana-etc" + +FILES_${PN} = "${sbindir}/ntpd.ntp ${sysconfdir}/ntp.conf ${sysconfdir}/init.d/ntpd ${libdir} \ + ${NTP_USER_HOME} \ + ${systemd_unitdir}/ntp-units.d/60-ntpd.list ${libexecdir}\ +" +FILES_${PN}-tickadj = "${sbindir}/tickadj" +FILES_${PN}-utils = "${sbindir} ${datadir}/ntp/lib" +RDEPENDS_${PN}-utils += "perl" +FILES_ntpdate = "${sbindir}/ntpdate \ + ${sysconfdir}/network/if-up.d/ntpdate-sync \ + ${bindir}/ntpdate-sync \ + ${sysconfdir}/default/ntpdate \ + ${systemd_unitdir}/system/ntpdate.service \ +" +FILES_sntp = "${sbindir}/sntp \ + ${sysconfdir}/default/sntp \ + ${systemd_unitdir}/system/sntp.service \ + " + +CONFFILES_${PN} = "${sysconfdir}/ntp.conf" +CONFFILES_ntpdate = "${sysconfdir}/default/ntpdate" + +INITSCRIPT_NAME = "ntpd" +# No dependencies, so just go in at the standard level (20) +INITSCRIPT_PARAMS = "defaults" + +pkg_postinst_ntpdate() { + if ! grep -q -s ntpdate $D/var/spool/cron/root; then + echo "adding crontab" + test -d $D/var/spool/cron || mkdir -p $D/var/spool/cron + echo "30 * * * * ${bindir}/ntpdate-sync silent" >> $D/var/spool/cron/root + fi +} + +inherit update-alternatives + +ALTERNATIVE_PRIORITY = "100" + +ALTERNATIVE_${PN} = "ntpd" +ALTERNATIVE_LINK_NAME[ntpd] = "${sbindir}/ntpd" -- cgit v1.2.3-54-g00ecf