linux/meta-openembedded.git/meta-oe/recipes-extended/smartmontools, branch master

smartmontools: add UPSTREAM_CHECK_URI

2025-11-12T17:39:00+00:00

Add UPSTREAM_CHECK_URI and UPSTREAM_CHECK_REGEX to check the correct latest stable verison. Before the patch: $ devtool latest-version smartmontools INFO: Current version: 7.5 INFO: Latest version: After the patch: $ devtool latest-version smartmontools INFO: Current version: 7.5 INFO: Latest version: 7.5 Signed-off-by: Yi Zhao Signed-off-by: Khem Raj

smartmontools: upgrade 7.4 -> 7.5

2025-09-27T23:18:15+00:00

Changelog: - CI and release builds are now reproducible if same SOURCE_DATE_EPOCH, build recipes and toolchains are used. - smartctl '-j -A': New JSON value 'endurance_used' (ATA/SCSI/NVMe). - smartctl '-j -A': New JSON value 'spare_available' (ATA/NVMe). - smartctl '-j -i': Re-added the JSON value 'model_name' also for SCSI devices (regression). - smartctl '-j -c': NVMe support. - smartctl '-j -n ...': New JSON values 'power_mode.*' (ATA only). - smartctl '-H -A': Support for NVMe SMART/Health Information per namespace. - smartctl '-i': ATA ACS-6 updates. - smartctl '-x': No longer includes '-g wcreorder'. - smartctl '-x', '-l scterc': No longer returns exit status 4 if SCT ERC is not supported by the device. - smartctl '-l error': No longer prints bogus ATA error log entries if the error index is nonzero but the error count is zero. - smartctl '-l ssd': Fixed corruption of the output of the SCSI Format Status log page. - smartctl '-l ssd': Now detects 'no format since manufacture' from the SCSI Format Status log page. - smartctl '-l farm': Fixed the unit of 'Write Power On' time. - smartctl '-l farm': Fixed the byte order of ATA 'Assembly Date'. - smartctl '-l farm': Fixed a possible segfault. - smartctl '-l farm -q noserial': Suppresses serial and WWN also from FARM. - smartctl '-l farm -T permissive': Overrides false negative FARM support check for rebranded drives. - smartctl '-t TEST': Fixed self-tests of single namespace NVMe devices. - smartd '-A': NVMe attribute log support. - smartd: Ignores NSID in duplicate check of single namespace devices. - smartd: No longer issues LOG_CRIT warnings for 'Set Feature' related NVMe error information log entries. - smartd: No longer hangs on systems with large file descriptor limits. - smartd: No longer logs invalid "old test ... not run" messages if staggered self-tests are used. - smartd.conf '-l selftest[sts] -s ...': NVMe self-test support. - smartd.conf '-H MASK': Ability to ignore specific bits of NVMe SMART/Health value 'Critical Warning'. - smartd.conf '-p': Checks NVMe SMART/Health value 'Available Spare'. - smartd.conf '-u [-f]': Checks NVMe SMART/Health values 'Percentage Used' and 'Media and Data Integrity Errors'. - smartd.conf '-W ...': No longer includes individual sensors in NVMe temperature check as some devices report other values there. - ATA: Device type '-d jmb39x-q2,N' for another JMB39x protocol variant used by QNAP-TR002 NAS devices. - SCSI: Fixed range checks of mode page offset and VPD inquiry. - SCSI: Fixed buffer overflow parsing of VPD page. - SCSI: Fixed handling of multiple designators in VPD page. - USB/NVMe: '-d sntjmicron' no longer triggers USB resets on queries of the self-test log. - USB/NVMe: '-d sntasmedia' now supports log pages > 512 bytes. - USB/NVMe/SAT: New experimental NVMe/SAT autodetection options '-d snt*/sat'. - Fixed segfault on missing option argument on systems using musl libc. - HDD, SSD and USB additions to drive database. - automake < 1.13 are no longer supported. - Custom make rules are now silenced if 'make V=0' is used. - Enhanced makefile targets 'dist-*' to create reproducible source tarballs if SOURCE_DATE_EPOCH is set. - The makefile no longer uses GNU make specific syntax elements (exception: reproducible builds for macOS). - Dropped support for platforms without 'sigaction()'. - configure: Now also detects MidnightBSD. - configure: Dropped option '--with-signal-func'. - configure: Default for '--with-nvme-devicescan' is now 'yes' also on NetBSD. - Version information is now also set if build from GH R/O mirror. - Linux: 'smartd.service' now avoids a warning about an unset environment variable. - Linux: Dropped autodetection of deprecated device type '-d marvell'. - macOS: Support for reproducible builds of the DMG image. - OpenBSD: NVMe support. - Windows: Increased WMI timeout. - Windows: Support for reproducible builds of the installer. - Windows: Uninstaller is no longer damaged if the installer is signed. - Windows 'update-smartd-drivedb.ps1': Fixed call of 'gpg.exe' if it appears more than once in the PATH. - Windows 'update-smartd-drivedb.ps1 -Verbose': Now also prints the download command. Signed-off-by: Gyorgy Sarvari Signed-off-by: Khem Raj

recipes: Start WORKDIR -> UNPACKDIR transition

2024-05-23T15:44:44+00:00

Replace references of WORKDIR with UNPACKDIR where it makes sense to do so in preparation for changing the default value of UNPACKDIR. Signed-off-by: Khem Raj

smartmontools: upgrade 7.3 -> 7.4

2023-08-16T03:07:54+00:00

Changelog: ========== - The docker image used for CI and release builds is now based on Debian 12 instead of Ubuntu 18.04. - macOS: CI and release builds are now generated for the x86_64 and arm64 targets. 32 bit platforms will require to be compiled from the source. - smartctl '-t short', '-t long' and '-X': NVMe support. - smartctl '-l selftest': NVMe support. - smartctl '-l farm': Prints Seagate's vendor-specific Field Access Reliability Metrics (FARM) log for ATA and SCSI drives. - smartctl '-l error': Now also prints an error message for each entry of NVMe error information log. - smartctl '-l genstats': Prints SCSI General statistics and performance log page. - smartctl '-i' and '--identify': ACS-4/5/6 enhancements. - smartctl '-c': Added NVMe 2.0 capability flags. - smartctl '-g security': Added 'ata_security.master_password_id' to JSON output. Plaintext output shows Master Password ID if set to a non-default value. - smartctl '-q noserial': Now also suppresses the output of NVMe Namespace IEEE EUI-64. - smartctl '-j': '-l error -l selftest' JSON output for NVMe devices. - smartctl '-j': Avoid invalid UTF-8 sequences in JSON/YAML strings. - smartctl '-j': Fixed a bogus exception during SCSI JSON output. - smartctl '-j': Renamed JSON element 'scsi_temperature' back to 'temperature' (regression). - smartctl '-a': Now suggests '-x' for ATA devices because '-a' only provides legacy SMART information. - smartd: No longer issues LOG_CRIT warnings if new entries of NVMe error information log do not indicate device problems. - smartd: Now detects accidental use of smartd_warning script as '-M exec' parameter. - smartd: No longer writes the 'Copyright...' line to syslog. - smartd.conf '-M always': Sends reminder emails without any delay. - smartd.conf '-M diminishing': Limited email delay to 32 days. - ATA: Fixed decoding of extended self-test log on big endian hosts. - ATA: Enhanced LBA range for device types '-d jmb39x-q,...' and '-d jms56x,...' from 33-62 to 1-255. - ATA: Device type '-d intelliprop,N' now fails with a deprecation message. Added '-d intelliprop,N,force' flag to use it anyway. - ATA/USB: Device type '-d usbasm1352r,N' for ASMedia ASM1352R USB to SATA RAID bridges - SCSI: Fixed possible corruption issue with the Error Counter and Non medium Error log pages. - SCSI: Added more "Informational Exceptions" strings. - SCSI: Added initial support for REPORT SUPPORTED OPERATION command. - SCSI: Initial rework of SCSI debug output. - NVMe: Added error messages for NVMe status values. - NVMe: Fixed crash after read of error information log on big endian hosts. - HDD, SSD and USB additions to drive database. - update-smart-drivedb: Fixed syntax for 'sed' versions which require ';' before '}' or do not support ';' at all. - update-smart-drivedb: Replaced a usually not executed bashism. - configure: Default for '--with-nvme-devicescan' is now 'yes' also on Darwin and FreeBSD. It is still 'no' on NetBSD only. - configure: Defines '_FORTIFY_SOURCE=3' if supported and not predefined. - configure: No longer fails if libsystemd-dev is installed and 'LDFLAGS=-static' is used. - Compile fix for systems without legacy 'getdtablesize()'. - Pre-releases from SVN snapshots now show "pre-VERSION" in version information and 'smartctl.pre_release=true' in JSON output. - Linux: Device type '-d sssraid' for 3SNIC RAID controllers. - Linux: Device type '-d marvell' now fails with a deprecation message. Added '-d marvell,force' flag to use it anyway. - Linux: The generic SCSI code now defaults to SG_IO_V3 and does no longer fall back to the deprecated SCSI_IOCTL_SEND_COMMAND (but this ioctl is still used for '-d 3ware' and '-d marvell,force'). - Linux smartd: Now prevents systemd unit startup timeout when many devices are registered and then initially checked. - Linux smartd: Systemd no longer reports a service failure if no device is present and a '-q *nodev0*' option is used. - Solaris SPARC: Dropped legacy ATA support. Dropped configure option '--with-solaris-sparc-ata'. - Windows: IOCTL_STORAGE_PROTOCOL_COMMAND variant for NVMe self-tests. - Windows: Installer now defaults to 64-bit executables. - Windows: No longer prints bogus 'Local Time' if enhanced TZ syntax is used. - Windows: Workaround to keep backward compatibility with old versions of Windows if some versions of MinGW-w64 are used. Signed-off-by: Wang Mingyu Signed-off-by: Khem Raj

smartmontools: fix Upstream-Status format

2023-01-26T18:24:25+00:00

Signed-off-by: Martin Jansa Signed-off-by: Khem Raj

smartmontools: upgrade 7.2 -> 7.3

2022-03-07T17:27:53+00:00

0001-configure.ac-Define-SOURCE_DATE_EPOCH-in-CPPFLAGS.patch refreshed for new version. Changelog: ========= - smartctl '-j': Many additions to the JSON output for SCSI/SAS devices. - smartctl '-j': JSON output always includes timestamp, regardless of '-i'. - smartctl '-i' and '--identify': ATA ACS-5 enhancements. - smartctl '-l defects': additionally works for SCSI Pending Defects log subpage. - smartctl '-l envrep': Prints SCSI Environmental Reporting log subpage. - smartctl '-l scterc[,R,W],p': Gets/sets the persistent power-on values. - smartctl '-l scterc,reset': Restores to manufacturer's default values. - smartctl '-l tapedevstat': Prints SCSI Tape Device Statistics log page. - smartctl '-l tapealert': Prints SCSI Tape Alert log page. - smartctl '-l zdevstat': Prints SCSI Zoned Block Device Statistics log subpage. - smartctl '-H': No longer checks and clears the SCSI Tape Alert log page unless the option is given twice. - smartctl '-H': No longer sets bit 2 of exit status if ATA attributes are available. - smartctl '-H': Checks new NVME 1.4 status bit. - smartctl '-n POWERMODE': ATA: Optionally exits immediately if unsupported. - smartctl: Support for Zoned block device characteristics and statistics. - smartctl: Various fixes related to SCSI supported log pages and subpages. - smartd: Fixed code execution vulnerability in conjunction with GNU mailutils < 3.13. - smartd '-u USER[:GROUP]': Runs the warning script as a non-privileged user. - smartd '--capabilities': No longer suppresses mail notification. - smartd '--capabilities=mail': Adds capabilities required for exim MTA. - smartd '-q *nodev0*': Three new options to change the exit status to 0 if there are no devices to monitor. - smartd '-s' and '-A': Allows one to disable preconfigured files with '-'. - smartd: Fixed handling of multiple email addresses in conjunction with plugin scripts. Added new environment variable SMARTD_ADDRESS_ORIG. - smartd: No longer writes 'smartd -D' output to syslog on syntax error. - smartd.conf '-c i=N': Allows one to specify device specific check intervals. - SCSI: Retry on UNIT ATTENTION when fetching capacity. - NVMe/USB: Device type '-d sntasmedia' for ASMedia ASM2362 USB to NVMe bridges. - VERSION information in drive database files of all branches. - smartctl and smartd print drive database VERSION information. - HDD, SSD and USB additions to drive database. - update-smart-drivedb: Now checks VERSION information to prevent downgrades. - update-smart-drivedb '--force': Overrides the VERSION check. - update-smart-drivedb '--file' and '--url': Updates from local files or other URLs. - update-smart-drivedb '-q': Suppresses info messages. - update-smart-drivedb: Added long option variants for all short options. - update-smart-drivedb: Prevents dangling gpg-agents and temp directories. - update-smart-drivedb '--install': Installs runtime drivedb.h from location specified by ... - configure '--with-drivedbinstdir: drivedb.h package install location. - configure: SOURCE_DATE_EPOCH prevents inclusion of configure arguments in executables. - configure: Check for '-fstack-protector' now includes the required libs. - Dropped restriction to C++98, a C++11 compiler is now required. - Linux: Device scan range enhanced to '/dev/sdzz'. - Linux: Fixed access to '-d aacraid' and '-d megaraid' devices from smartd if '--capabilities' is used. - Linux: '-d cciss,N' is no longer required for non-RAID hpsa devices. - Darwin: smartctl '-s apm,N' is now supported. - OpenBSD: Fixed too short command timeouts. - OpenBSD: Fixed device name used for autodetection. - OpenBSD: Fixed SAT autodetection of sd* devices. - FreeBSD: Added direct access ('-d megaraid,N') and scanning for LSI RAID on 'mfi' and 'mrsas' controllers. - Windows: smartd '-u restricted': Runs the warning script with a restricted access token. - Windows: New script 'update-smartd-drivedb.ps1' provides gpg verification and replaces 'update-smartd-drivedb.exe'. - Windows: Disabled '-d aacraid' support due to unresolved bugs. Added '-d accraid,...,force' flag to try anyway. Signed-off-by: Wang Mingyu Signed-off-by: Khem Raj

recipes: Update LICENSE variable to use SPDX license identifiers

2022-03-05T01:41:45+00:00

Signed-off-by: Khem Raj

smartmontools: use s-nail

2022-02-03T16:44:32+00:00

As mailx is unmaintained, depend on s-nail instead of mailx. Also recommend instead of depend, so you don't need to send email. Signed-off-by: Ross Burton Signed-off-by: Khem Raj

Convert to new override syntax

2021-08-03T17:21:25+00:00

This is the result of automated script (0.9.1) conversion: oe-core/scripts/contrib/convert-overrides.py . converting the metadata to use ":" as the override character instead of "_". Signed-off-by: Martin Jansa

smartmontools: Improve reproducibility

2021-02-22T17:29:35+00:00

Backport changes added to master smartmontools. https://github.com/smartmontools/smartmontools/commit/24838916b4c0e91f5c897d44fcdeedb22848f684 Signed-off-by: Oleksiy Obitotskyy Signed-off-by: Khem Raj