linux/meta-openembedded.git/meta-multimedia, branch yoe/mut

openh264: make neon optional and disable if not supported

2023-08-31T14:43:23+00:00

openh264 currently enforces neon on armv7, although it has fallbacks implemented in C/C++ and it is mentioned in the README that it is optional[1]. Therefore, make neon optional and disable it if the machine does not support it. [1] https://github.com/cisco/openh264/blob/v2.3.1/README.md?plain=1#L54 Signed-off-by: Benjamin Bara Signed-off-by: Khem Raj

pipewire: upgrade 0.3.78 -> 0.3.79

2023-08-30T07:20:59+00:00

This is a quick bugfix release that is API and ABI compatible with previous 0.3.x releases. - Fix a regression in suspend that could cause silence. - Fix a regression in JACK port registration that could cause all kinds of JACK problems. (#3485) - Fix a typo in the neon sample conversion functions that could cause distortion. - Add BAP broadcast source and sink support. - pw-top now has a batch mode to dump the output to stdout. - Many more bugfixes and improvements. - Fix a regression in shutdown where a node might not first suspend properly. This cause loss of sound in some cases. (#3378) - Failure to compile a regular expression in the config file will now be reported and ! can be used to negate the match. (#3460) - Fix a regression where some nodes might not set running in some cases. - Nodes are now suspended before the format is cleared, which might fix some crashes. - pw-top now has a batch mode to dump the output to stdout. - The queued samples in audioconvert are now correctly reported in the delay. (#3454) - Make it easier to add a custom profile in ACP. - Fix a typo in the neon sample conversion functions that could cause distortion. (#3463) - device.profile.pro=true is added for pro audio nodes. - An xrun counter was added to spa_io_clock to detect and track skipped data because of xruns. - Add alsa-sink and alsa-source modules. (#3456) - Fix a regression where only the BAP off profile is shown. - Add BAP broadcast source and sink support. - Also emit a latency notify when the buffer size changes. - Fix a regression in JACK port registration. (#3485) - jack_port_tie() is now supported. - Improve property handling, support lists and ranges in addition to fixed values. (#3451) Signed-off-by: Markus Volk Signed-off-by: Khem Raj

pipewire: upgrade 0.3.77 -> 0.3.78

2023-08-27T00:32:44+00:00

This is a small bugfix release that is API and ABI compatible with previous 0.3.x releases. - An old regression was fixed with where some nodes would not run. - A regression was fixed where removed events would not be shown in some cases. This would result in duplicate entries in audio clients. - Fix an off-by-one in the vban audio receiver. Tweak the rate adaption a little. - ACP will now set a UCM verb before probing the pro-audio devices. - More bugfixes and improvements. - An old regression was fixed with where some nodes would not run. (#3405) - Suspend was improved a little to avoid races when the session manager would suspend right when a driver was starting. - module-rtp-sap does not use the deprecated inet_aton anymore. - Fix an off-by-one in the vban audio receiver. Tweak the rate adaption a little. (#3380) - ACP will now set a UCM verb before probing the pro-audio devices. (#3407) - The mandatory flag will be set now on the video modifiers. - EVL was updated to Xenomai4 r46 and xbuf creation was improved. - An option was added to force colors in the log even when logging to !tty. - The return type of spa_pod_builder_control() was fixed. - inotify errors are handled better now. (#3439) - A regression was fixed where removed events would not be shown in some cases. (#3414) - Improve compatibility with more devices, avoid reusing the same transport for different media-sink instances to avoid encoder resets. - Improve enumeration of codec profiles for BAP and A2DP. - Ensure we can't iterate ports from a deactivated client. Also make sure the JACK clients with the node.always-process=false always show their ports. (#3416) - A potential crash was fixed in the device provider when stopping. Signed-off-by: Markus Volk Signed-off-by: Khem Raj

openh264: fix installed-vs-shared QA issue with multilib

2023-08-13T17:38:14+00:00

* in some cases libdir is /usr/lib64 and then libraries installed in /usr/lib aren't packaged: ERROR: QA Issue: openh264: Files/directories were installed but not shipped in any package: /usr/lib/libopenh264.a /usr/lib/libopenh264.so.2.1.1 /usr/lib/libopenh264.so /usr/lib/libopenh264.so.6 /usr/lib/pkgconfig /usr/lib/pkgconfig/openh264.pc Please set FILES such that these items are packaged. Alternatively if they are unneeded, avoid installing them or delete them within do_install. openh264: 6 installed and not shipped files. [installed-vs-shipped] Signed-off-by: Martin Jansa Signed-off-by: Khem Raj

pipewire: add support for liblc3

2023-08-05T16:29:56+00:00

- add liblc3 recipe Signed-off-by: Markus Volk Signed-off-by: Khem Raj

pipewire: update 0.3.75 -> 0.3.77

2023-08-05T16:29:56+00:00

This is a quick bugfix release that is API and ABI compatible with previous 0.3.x releases. - Fix a bug in ALSA source where the available number of samples was miscaluclated and resulted in xruns in some cases. - A new L permission was added to make it possible to force a link between nodes even when the nodes can't see eachother. - The VBAN module now supports midi send and receive as well. - Many cleanups and small fixes. - Global objects now only show permissions that apply to them. The permissions required to perform various API calls are documented. - A new L permission was added to make it possible to force a link between nodes even when the nodes can't see eachother. - Config files need to end with .conf. - The client.api is added the to global properties of a node. - The VBAN module now supports midi send and receive as well. - Fix module-profiler alignment and make sure we don't overrun our buffers with many nodes. - Protect libcanberra calls with a mutex because it is not thread safe. (#2834) - Support older compilers for spa_clear_ptr(). - Fix a bug in ALSA source where the available number of samples was miscaluclated and resulted in xruns. (#3395) - Don't set inotify on /dev but on the videoX devices directly. Setting inotify on /dev would cause a lot of spurious wakeups and lock contention in the fsnotify subsystem on some benchmarks. - Audioconvert now rate limits the warnings when it runs out of buffers. (#3384) - Some bugs and inconsistencies were fixed in device lookup. - Improve subscribe event emission, detect changes to the sink or the monitor and send the right sink/source event. (#3388) - The libjack.so now has a minor version of 3 and a micro version of the pipewire version. - JACK clients will now see portregistration from other jack clients when they activate/deactivate like real JACK. (#3260) - Use some more autoptr cleanups, fix some leaks. Older versions: This is a quick bugfix release that is API and ABI compatible with previous - LE Audio support is now enabled by default when liblc3 is available now that bluez has support for detecting the hardware features. Signed-off-by: Markus Volk Signed-off-by: Khem Raj

remove unused AUTHOR variable

2023-08-03T16:14:20+00:00

No longer used in generating packages Also creates a possible confusion with the recipe maintainer name. Signed-off-by: Michael Opdenacker Signed-off-by: Khem Raj

libcamera: bump to latest master

2023-08-03T05:57:25+00:00

Bump libcamera to latest master, as commit a2eadc40a introduces flicker controls for rpi which are required in latest libcamera-apps. Signed-off-by: Vivien Didelot Signed-off-by: Khem Raj

libcamera: update 0.0.5 -> 0.1.0

2023-07-23T23:36:14+00:00

libcamera v0.1.0 ABI Compliance: abi-compliance-checker reports 99% binary compatibility and 81.4% source compatibilty between version 0.0.5 and 0.1. - Binary compatibility: 99% - Source compatibility: 81.4% - Total binary compatibility problems: 4, warnings: 2 - Total source compatibility problems: 165, warnings: 7 Now that we have funtional ABI validation, the soname has been updated from libcamera.so.0.0.5 to libcamera.so.0.1. Future releases will now maintain the same soname until an ABI breakage is detected to reduce the repackaging and rebuilding of other components that may use libcamera. The abi-compatibility report can now be generated with the new utility './utils/abi-compat.sh'. Key differences here are due to preventing the installation of internal and private headers in the packaging process, and most of this API compatibility should not be visible to applications with the exception of: - Camera::generateConfiguration ( StreamRoles const& roles ) The StreamRoles type definition has been removed. This is now handled as a Span to prevent unnecessary allocations and copies. - CameraManager::addCamera ( std::shared_ptr camera, std::vectorconst& devnums ) - CameraManager::get ( dev_t devnum ) - CameraManager::removeCamera ( std::shared_ptr camera ) These functions of the CameraManager were for use exclusively by the V4L2 adaptation layer, and not intended for use by applications. This has now been reworked to use the new SystemDevices and the redundant functions removed. The ABI/API breakages have been introduced by: 5ca0c9276f28 ("libcamera: CameraManager: Remove ::get(dev_t)") 26a4b83d1b94 ("libcamera: Remove `StreamRoles` alias") 63966ae587d7 ("libcamera: base: Do not install private headers") Core: - libcamera: v4l2_videodevice: Use O_CLOEXEC when exporting DMA buffers - libcamera: ipa_manager: Allow IPA loading in nested subdirs - meson: Fix usage of overwritten pipeline variable - subprojects: Drop leftovers of pybind11 - camera_sensor: ipa: core: Add CFA pattern to IPACameraSensorInfo - libcamera: controls: Define a default lens position behaviour - libcamera: internal: request: convert to pragma once - libcamera: camera_manager: Move private implementation to internal - libcamera: camera_manager: Move {add,remove}Camera to internal - libcamera: properties: Provide a Devices camera property - libcamera: pipeline: Register device numbers with camera - libcamera: camera_sensor: Adjust properties::Rotation - libcamera: meson: Allow PH to change libcamera_deps - libcamera: base: Move thread_annotations to private - libcamera: base: Do not install private headers - utils: ABI Compatibility checker - meson: Use x.y soname versioning - libcamera: camera: Take span of StreamRole instead of vector - libcamera: Remove `StreamRoles` alias - utils: ipu3-capture.sh: Fix the script to work with recent media-ctl versions - Documentation: Add predefined macros from config.h to Doxyfile - utils: checkstyle: Add __repr__ method to CommitFile class - utils: checkstyle: Support running checkers selectively - utils: checkstyle: Don't include commit ID in commit title - utils: checkstyle: Add trailers checker - tests: gstreamer: Test cameras' enumeration from GstDeviceProvider - meson: Fix space around colon issues - libcamera: Add option to configure udev support - libcamera: CameraManager: Remove ::get(dev_t) - tests: gstreamer: Fix compiler error with gcc 8.4.0 ipa: - meson: ipa: Add mapping for pipeline handler to mojom interface file - libcamera: ipa: Remove character restriction on the IPA name - ipa: meson: Allow nested IPA directory structures - ipa: raspberrypi: Introduce IpaBase class - ipa: raspberrypi: agc: Move weights out of AGC - ipa: rkisp1: agc: drop hard-coded analogue gain range - libipa: camera_sensor_helper: Add IMX327 helper - pipeline: rpi: ipa_base: Parse config files after platformRegister() - libcamera: camera_sensor: Add Sony IMX327 sensor properties - ipa: rpi: imx296: Small refinements to the IMX296 mono sensor tuning - ipa: rpi: Handle controls for mono variant sensors - libcamera: controls: Drop reference to IPA in controls documentation - libipa: camera_sensor_helper: Restore alphabetical order - ipa: ipu3: agc: Drop hard-codec analogue gain max - ipa: rkisp1: agc: Restore minimum analogue gain limit - pipeline: ipa: rpi: Return lens controls from ipa->configure() - ipa: rpi: Set lens position to hyperfocal on startup - ipa: rpi: tunings: Add missing short and long exposure profiles - ipa: rpi: agc: Use std::string instead of char arrays - ipa: rpi: agc: Gracefully handle missing agc modes - ipa: rpi: agc: Do not switch to a default if a mode is unavailable - ipa: rpi: imx708: Fix mode switch drop frame count - ipa: rpi: imx296_mono: Disable all colour shading pipeline: - libcamera: pipeline: simple: Add support for ST's DCMIPP - pipeline: meson: Allow nested pipeline handler directory structures - pipeline: ipa: raspberrypi: Refactor and move the Raspberry Pi code - pipeline: raspberrypi: rpi_stream: Set invalid buffer to id == 0 - pipeline: ipa: raspberrypi: Restructure the IPA mojom interface - pipeline: raspberrypi: Make RPi::Stream::name() return const std::string & - pipeline: raspberrypi: Introduce PipelineHandlerBase class - pipeline: raspberrypi: Add stream flags to RPi::Stream - libcamera: rkisp1: Generate config using main path - libcamera: rkisp1: Crop on ISP before downscaling - libcamera: rkisp1: Assign sizes to roles - libcamera: rkisp1: Fix enumeration of RAW formats - pipeline: rpi: Do not return an error from pipeline config file handling - libcamera: pipeline: simple: Support TI CSI-RX - pipeline: rpi: Account for Bayer packing when validating format apps: - apps: qcam: Remove redundant check - v4l2: Move the v4l2 compat layer to libexec/libcamera - android: mm: generic: use GRALLOC_HARDWARE_MODULE_ID - android: mm: Stub libhardware for build tests - py: Fix CameraManager.version property - py: Move ColorSpace and Transform classes to separate files - py: Use exceptions instead of returning error codes - py: unittests.py: Add weakref helpers and use del - py: Move to mainline pybind11 version - py: Fix code formatting - py: unittests.py: Fix type checker warnings - gstreamer: Add enable_auto_focus option to the GStreamer plugin - gstreamer: Drop libcamera_private dependency - apps: Add ipa-verify application - v4l2: v4l2_camera_proxy: Prevent ioctl sign-extensions - v4l2: Use SystemDevices properties to identify cameras Signed-off-by: Markus Volk Signed-off-by: Khem Raj

pipewire: update 0.3.73 -> 0.3.75

2023-07-23T23:36:14+00:00

This is a bugfix release that is API and ABI compatible with previous 0.3.x releases. - Link permissions between nodes are now enforced. This avoids potential portal managed screencast nodes to link to the camera even though it was not assigned permissions to do so by the session manager. - Libcamera and v4l2 devices now have properties so that duplicates can be filtered out by the session manager. - A bug with draining was fixed where a buffer would be marked EMPTY and would not play when it contained drained samples. (#3365) - Many fixes and improvements. - Permissions for links between nodes are now enforced. The link will now check that the owner clients of the nodes can see eachother before allowing the link. This avoids screensharing clients to accidentally being linked to the camera nodes by the session manager. A side effect is that patchbay tools will no longer be able to link portal managed screencast nodes to the camera, for this we need a new permission for those patchbay clients. (wireplumber#218) - The stream.rules/filter.rules are now evaluated when connecting the stream/filter so that more properties can be matched. (#3355) - Move some internal events from the context to the nodes to better handle per-node threads in the future. - The thread-loop will now signal when the thread is started. - A timestamp workaround in module-raop was reverted because it does not work in all cases. Instead latency was increased to 1.5 seconds, which also makes the problematic device in question work. (#3247) - The profiler module was reworked a bit to use the new node realtime events. It should now also handle dynamically added and removed drivers. - The module-rt now does the rtkit calls from a separate thread so that it does not block the main thread. This could cause deadlocks during startup in some cases. (#3357) - Atomic operation macros were move from internal pipewire API to public API. - The video-info structure now has a new SPA_VIDEO_FLAG_MODIFIER_FIXATION_REQUIRED flag to instruct the application to fixate the modifiers. This simplifies some logic in applications a lot. - The libcamera and v4l2 nodes now have properties to enumerate the device id they are using. This can be used to match v4l2 devices and libcamera devices and filter out duplicates. - A bug with draining was fixed where a buffer would be marked EMPTY and would not play when it contained drained samples. (#3365) This is a quick bugfix release that is API and ABI compatible with previous - Merge scope based cleanup macros. - Add ratelimit function. Signed-off-by: Markus Volk Signed-off-by: Khem Raj