linux/meta-openembedded.git/meta-multimedia/recipes-multimedia/wireplumber, branch master-next

wireplumber: update 0.5.13 -> 0.5.14

2026-04-20T17:44:41+00:00

WirePlumber 0.5.14 ~~~~~~~~~~~~~~~~~~ Additions & Enhancements: - Added per-device default volume configuration via the ``device.routes.default-{source,sink}-volume`` property, allowing device-specific volume defaults (e.g. a comfortable default for internal speakers or no attenuation for HDMI) (!772) - Added Lua 5.5 support; the bundled Lua subproject wrap has also been updated to 5.5.0 (!775, !788) - Enhanced libcamera monitor to load camera nodes locally within the WirePlumber process instead of the PipeWire daemon, eliminating race conditions that could occur during initial enumeration and hotplug events (!790) - Enhanced Bluetooth loopback nodes to always be created when a device supports both A2DP and HSP/HFP profiles, simplifying the logic and making the BT profile autoswitch setting take effect immediately without requiring device reconnection (!782) - Enhanced Bluetooth loopback nodes to use ``target.object`` property instead of smart filters, fixing issues that prevented users from setting them as default nodes and also allowing smart filters to be used with them (#898; !792) - Enhanced Bluetooth profile autoswitch logic with further robustness improvements, including better headset profile detection using profile name patterns and resolving race conditions by running profile switching after ``device/apply-profile`` in a dedicated event hook (#926, #923; !776, !777, !808) - Enhanced wpctl ``set-default`` command to accept virtual nodes (e.g. ``Audio/Source/Virtual``) in addition to regular device nodes (#896; !787) - Improved stream linking to make the full graph rescan optional when linkable items change, saving CPU on low-end systems and reducing audio startup latency when connecting multiple streams in quick succession (!800) - Allowed installation of systemd service units without libsystemd being present, useful for distributions like Alpine Linux that allow systemd service subpackages (!793) - Allowed the ``mincore`` syscall in the WirePlumber systemd sandbox, required for Mesa/EGL (e.g. for the libcamera GPUISP pipeline) - Allowed passing ``WIREPLUMBER_CONFIG_DIR`` via the ``wp-uninstalled`` script, useful for passing additional configuration paths in an uninstalled environment (!801) Fixes: - Removed Bluetooth sink loopback node, which was causing issues with KDE and GNOME (!794) - Fixed default audio source selection to never automatically use ``Audio/Sink`` nodes as the default source unless explicitly selected by the user (#886; !781) - Fixed crash in ``state-stream`` when the Format parameter has a Choice for the number of channels (#903; !795) - Fixed BAP Bluetooth device set channel properties, where ``audio.position`` was incorrectly serialized as a pointer address instead of the channel array (!786) - Fixed memory leaks in ``wp_interest_event_hook_get_matching_event_types`` and in the Lua ``LocalModule()`` implementation (!784, !810) - Fixed HFP HF stream media class being incorrectly assigned due to ``api.bluez5.internal=true`` being set on HFP HF streams (!809) - Fixed Lua 5.4 compatibility in ``state-stream`` script - Updated translations: Bulgarian, Georgian, Kazakh, Swedish Signed-off-by: Markus Volk Signed-off-by: Khem Raj

wireplumber: add ptest support

2025-12-24T21:19:13+00:00

Execution takes <10s. Sample output: root@qemux86-64:~# ptest-runner START: ptest-runner 2025-12-24T19:17 BEGIN: /usr/lib/wireplumber/ptest PASS: ./wp/test-spa-json PASS: ./wp/test-spa-pod PASS: ./wp/test-spa-type PASS: ./wp/test-properties PASS: ./wp/test-core PASS: ./wp/test-session-item PASS: ./wp/test-json-utils PASS: ./wp/test-events PASS: ./wp/test-conf PASS: ./wp/test-transition PASS: ./wp/test-object-interest PASS: ./wp/test-metadata PASS: ./wp/test-object-manager PASS: ./wp/test-factory PASS: ./wp/test-settings PASS: ./wp/test-proxy PASS: ./wp/test-state PASS: ./wp/test-component-loader PASS: 00-test-linking-non-default-device-node.lua PASS: 01-test-linking-non-default-device-node-capture.lua PASS: 02-test-linking-default-device-node.lua PASS: 03-test-linking-default-device-node-capture.lua PASS: 04-test-linking-defined-device-node-target-object-string.lua PASS: 05-test-linking-defined-device-node-target-object-int.lua PASS: 06-test-linking-defined-device-node-target-object-name.lua PASS: 07-test-linking-defined-device-node-target-object-string-capture.lua PASS: 08-test-linking-defined-device-node-target-object-int-capture.lua PASS: 09-test-linking-defined-device-node-target-object-name-capture.lua PASS: 10-test-linking-defined-device-node-node-target.lua PASS: 11-test-linking-defined-device-node-node-target-capture.lua PASS: 12-test-linking-defined-device-node-target-node-metadata.lua PASS: 13-test-linking-defined-device-node-target-node-metadata-capture.lua PASS: 14-test-linking-defined-device-node-target-object-metadata.lua PASS: 15-test-linking-defined-device-node-target-object-metadata-capture.lua PASS: 16-test-linking-defined-device-node-target-object-int-metadata.lua PASS: 17-test-linking-defined-device-node-target-object-int-metadata-capture.lua PASS: 00-test-default-nodes-initial-metadata-update.lua /usr/lib/wireplumber/ptest PASS: pod.lua PASS: json.lua PASS: json-utils.lua PASS: monitor-rules.lua PASS: require.lua PASS: async-activation.lua PASS: settings.lua PASS: event-hooks.lua PASS: properties.lua /usr/lib/wireplumber/ptest PASS: ./wplua/test-wplua PASS: ./modules/test-file-monitor PASS: ./modules/test-si-node PASS: ./modules/test-si-standard-link PASS: ./modules/test-dbus-connection PASS: ./modules/test-si-audio-adapter PASS: ./modules/test-reserve-device DURATION: 1 END: /usr/lib/wireplumber/ptest 2025-12-24T19:17 STOP: ptest-runner TOTAL: 1 FAIL: 0 Signed-off-by: Gyorgy Sarvari Signed-off-by: Khem Raj

wireplumber: upgrade 0.5.11 -> 0.5.13

2025-12-24T21:19:13+00:00

Changelog: 0.5.13: Additions & Enhancements: - Added internal filter graph support for audio nodes, allowing users to create audio preprocessing and postprocessing chains without exposing filters to applications, useful for software DSP - Added new Lua Properties API that significantly improves performance by avoiding constant serialization between WpProperties and Lua tables, resulting in approximately 40% faster node linking - Added WpIterator Lua API for more efficient parameter enumeration - Added bash completions for wpctl command - Added script to find suitable volume control when using role-based policy, allowing volume sliders to automatically adjust the volume of the currently active role (e.g., ringing, call, media) - Added experimental HDMI channel detection setting to use HDMI ELD information for channel configuration - Enhanced role-based policy to allow setting preferred target sinks for media role loopbacks via policy.role-based.preferred-target - Enhanced Bluetooth profile autoswitch logic to be more robust and handle saved profiles correctly, including support for loopback sink nodes - Enhanced ALSA monitor to include alsa.* device properties on nodes for rule matching - Optimized stream node linking for common cases to reduce latency when new audio/video streams are added - Improved event dispatcher performance by using hash table registration for event hooks, eliminating performance degradation as more hooks are registered - Increased audio headroom for VMware and VirtualBox virtual machines - Added setting to prevent restoring "Off" profiles via session.dont-restore-off-profile property - Added support for 128 audio channels when compiled with a recent version of PipeWire Fixes: - Fixed memory leaks and issues in the modem manager module - Fixed MPRIS module incorrectly treating GHashTable as GObject - Fixed warning messages when process files in /proc//* don't exist, particularly when processes are removed quickly - Fixed MONO audio configuration to only apply to device sink nodes, allowing multi-channel mixing in the graph - Fixed event dispatcher hook registration and removal to avoid spurious errors - Improved logging for standard-link activation failures - Simplified event-hook interest matching for better performance 0.5.12: Additions & Enhancements: - Added mono audio configuration support via node.features.audio.mono setting that can be changed at runtime with wpctl - Added automatic muting of ALSA devices when a running node is removed, helping prevent loud audio on speakers when headsets are unplugged - Added notifications API module for sending system notifications - Added comprehensive wpctl man page and documentation - Enhanced object interest handling for PipeWire properties on session items Fixes: - Fixed race condition during shutdown in the permissions portal module that could cause crashes in GDBus signal handling - Added device validity check in state-routes handling to prevent issues when devices are removed during async operations - Fixed Log.critical undefined function error in device-info-cache - Improved device hook documentation and configuration Signed-off-by: Gyorgy Sarvari Signed-off-by: Khem Raj

wireplumber: update 0.5.10 -> 0.5.11

2025-09-15T16:55:17+00:00

WirePlumber 0.5.11 ~~~~~~~~~~~~~~~~~~ Additions & Enhancements: - Added modem manager module for tracking voice call status and voice call device profile selection hooks to improve phone call audio routing on mobile devices (!722, !729, #819) - Added MPRIS media player pause functionality that automatically pauses media playback when the audio target (e.g. headphones) is removed (!699, #764) - Added support for human-readable names and localization of settings in ``wireplumber.conf`` with ``wpctl`` displaying localized setting descriptions (!712) - Improved default node selection logic to use both session and route priorities when nodes have equal session priorities (!720) - Increased USB device priority in the ALSA monitor (!719) Fixes: - Fixed multiple Lua runtime issues including type confusion bugs, stack overflow prevention, and SPA POD array/choice builders (!723, !728) - Fixed proxy object lifecycle management by properly clearing the OWNED_BY_PROXY flag when proxies are destroyed to prevent dangling pointers (!732) - Fixed state-routes handling to prevent saving unavailable routes and eliminate race conditions during profile switching (!730, #762) - Fixed some memory leaks in the script tester and the settings iterator (!727, !726) - Fixed a potential crash caused by module-loopback destroying itself when the pipewire connection is closed (#812) - Fixed profile saving behavior in ``wpctl set-profile`` command (#808) - Fixed GObject introspection closure annotation Signed-off-by: Markus Volk Signed-off-by: Khem Raj

meta-openembedded/all: adapt to UNPACKDIR changes

2025-06-25T13:44:52+00:00

Please see https://git.yoctoproject.org/poky/commit/?id=4dd321f8b83afecd962393101b2a6861275b5265 for what changes are needed, and sed commands that can be used to make them en masse. I've verified that bitbake -c patch world works with these, but did not run a world build; the majority of recipes shouldn't need further fixups, but if there are some that still fall out, they can be fixed in followups. Signed-off-by: Alexander Kanavin Signed-off-by: Khem Raj

wireplumber: update 0.5.8 -> 0.5.10

2025-05-27T17:33:01+00:00

WirePlumber 0.5.10 Fixed a critical crash in linking-utils.haveAvailableRoutes that was introduced accidentally in 0.5.9 and caused loss of audio output on affected systems (#797, #799, #800, !713) WirePlumber 0.5.9 Added a new audio node grouping functionality using an external command line tool (!646) The libcamera monitor now supports devices that are not associated with device ids (!701) The wireplumber user systemd service is now associated with dbus.service to avoid strange warnings when dbus exits (!702) Added "SYSLOG_IDENTIFIER", "SYSLOG_FACILITY", "SYSLOG_PID" and "TID" to log messages that are sent to the journal (!709) Fixes: Fixed a crash of wpctl set-default on 32-bit architectures (#773) Fixed a crash when a configuration component had no 'provides' field (#771) Reduced the log level of some messages that didn't need to be as high (!695) Fixed another nil reference issue in the alsa.lua monitor script (!704) Fixed name deduplication of v4l2 and libcamera devices (!705) Fixed an issue with wpctl not being able to save settings sometimes (!708, #749) Signed-off-by: Markus Volk Signed-off-by: Khem Raj

wireplumber: update 0.5.7 -> 0.5.8

2025-03-10T16:41:56+00:00

WirePlumber 0.5.8 ~~~~~~~~~~~~~~~~~ Additions & Enhancements: - Added support for handling UCM SplitPCM nodes in the ALSA monitor, which allows native PipeWire channel remapping using loopbacks for devices that use this feature (!685) - Introduced new functions to mark WpSpaDevice child objects as pending. This allows properly associating asynchronously created loopback nodes with their parent WpSpaDevice without losing ObjectConfig events (!687, !689) - Improved the node name deduplication logic in the ALSA monitor to prevent node names with .2, .3, etc appended to them in some more cases (!688) - Added a new script to populate ``session.services``. This is a step towards implementing detection of features that PipeWire can service (!686) Fixes: - Fixed an issue that was causing duplicate Bluetooth SCO (HSP/HFP) source nodes to be shown in UIs (#701, !683) - In the BlueZ monitor, marked the source loopback node as non-virtual, addressing how it appears on UIs (#729) - Disabled stream-restore for device loopback nodes to prevent unwanted property changes (!691) - Fixed ``wp_lua_log_topic_copy()`` to correctly copy topic names (#757) - Updated script tests to handle differences in object identifiers (``object.serial`` vs ``node.id``), ensuring proper test behavior (#761) Signed-off-by: Markus Volk Signed-off-by: Khem Raj

wireplumber: update 0.5.6 -> 0.5.7

2024-12-07T04:55:57+00:00

WirePlumber 0.5.7 ~~~~~~~~~~~~~~~~~ Highlights: - Fixed an issue that would cause random profile switching when an application was trying to capture from non-Bluetooth devices (#715, #634, !669) - Fixed an issue that would cause strange profile selection issues [choices not being remembered or unavailable routes being selected] (#734) - Added a timer that delays switching Bluetooth headsets to the HSP/HFP profile, avoiding needless rapid switching when an application is trying to probe device capabilities instead of actually capturing audio (!664) - Improved libcamera/v4l2 device deduplication logic to work with more complex devices (!674, !675, #689, #708) Fixes: - Fixed two memory leaks in module-mixer-api and module-dbus-connection (!672, !673) - Fixed a crash that could occur in module-reserve-device (!680, #742) - Fixed an issue that would cause the warning "[string "alsa.lua"]:182: attempt to concatenate a nil value (local 'node_name')" to appear in the logs when an ALSA device was busy, breaking node name deduplication (!681) - Fixed an issue that could make find-preferred-profile.lua crash instead of properly applying profile priority rules (#751) Signed-off-by: Markus Volk Signed-off-by: Khem Raj

wireplumber: update 0.5.5. -> 0.5.6

2024-09-14T15:43:55+00:00

WirePlumber 0.5.6 ~~~~~~~~~~~~~~~~~ Additions: - Implemented before/after dependencies for components, to ensure correct load order in custom configurations (#600) - Implemented profile inheritance in the configuration file. This allows profiles to inherit all the feature specifications of other profiles, which is useful to avoid copying long lists of features just to make small changes - Added multi-instance configuration profiles, tested and documented them - Added a ``main-systemwide`` profile, which is now the default for instances started via the system-wide systemd service and disables features that depend on the user session (#608) - Added a ``wp_core_connect_fd`` method, which allows making a connection to PipeWire via an existing open socket (useful for portal-based connections) Fixes: - The Bluetooth auto-switch script now uses the common event source object managers, which should improve its stability (!663) - Fix an issue where switching between Bluetooth profiles would temporarily link active audio streams to the internal speakers (!655) Signed-off-by: Markus Volk Signed-off-by: Khem Raj

wireplumber: update 0.5.3 -> 0.5.5

2024-07-02T06:38:56+00:00

WirePlumber 0.5.5 Highlights: Hotfix release to address crashes in the Bluetooth HSP/HFP autoswitch functionality that were side-effects of some changes that were part of the role-based linking policy (#682) Improvements: wpctl will now properly show a '*' in front of sink filters when they are selected as the default sink (!660) Past releases WirePlumber 0.5.4 Highlights: Refactored the role-based linking policy (previously known also as "endpoints" or "virtual items" policy) to blend in with the standard desktop policy. It is now possible use role-based sinks alongside standard desktop audio operations and they will only be used for streams that have a "media.role" defined. It is also possible to force streams to have a media.role, using a setting. Other features include: blending with smart filters in the graph and allowing hardware DSP nodes to be also used easily instead of requiring software loopbacks for all roles. (#610, !649) Improvements: Filters that are not declared as smart will now behave again as normal application streams, instead of being treated sometimes differently (!657) Fixes: Fixed an issue that would cause WirePlumber to crash at startup if an empty configuration file was present in one of the search paths (#671) Fixed Bluetooth profile auto-switching when a filter is permanently linked to the Bluetooth source (!650) Fixed an issue in the software-dsp script that would cause DSP filters to stay around and cause issues after their device node was destroyed (!651) Fixed an issue in the autoswitch-bluetooth-profile script that could cause an infinite loop of switching between profiles (!652, #617) Fixed a rare issue that could cause WirePlumber to crash when dealing with a device object that didn't have the "device.name" property set (#674) Signed-off-by: Markus Volk Signed-off-by: Khem Raj