cedartrail: remove BSP

Cedartrail will not be supported in the Yocto 1.4 Release.

Remove it from meta-intel.

Signed-off-by: Kishore Bodke <kishore.k.bodke@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>

1 files changed, 0 insertions, 199 deletions

diff --git a/meta-cedartrail/README b/meta-cedartrail/README
deleted file mode 100755
index fe84c2de..00000000
--- a/meta-cedartrail/README
+++ /dev/null
@@ -1,199 +0,0 @@
-This README file contains information on building the meta-cedartrail
-BSP layer, and booting the images contained in the /binary directory.
-Please see the corresponding sections below for details.
-
-The 'Cedar Trail' platform consists of the Intel® Atom™
-N2600/N2800/D2550 processor, plus the Intel® NM10 Express Chispset
-(Cedarview + Tiger Point).
-
-It also supports on-chip SGX545 graphics and media accelerator
-via the Cedar Trail Power VR (PVR) graphics driver.
-
-Further information about the platforms supported by this BSP can be
-found here:
-
-  http://www.intel.com/p/en_US/embedded/hwsw/hardware/atom-n2000-d2000/overview
-
-Information on all Intel® embedded platforms can be found here:
-
-  http://www.intel.com/p/en_US/embedded/hwsw/hardware
-
-
-Compliance
-==========
-
-This BSP is compliant with the Yocto Project as per the requirements
-listed here:
-
-  https://www.yoctoproject.org/webform/yocto-project-compatible-registration
-
-
-Dependencies
-============
-
-This layer depends on:
-
-  URI: git://git.openembedded.org/bitbake
-  branch: master
-
-  URI: git://git.openembedded.org/openembedded-core
-  layers: meta
-  branch: master
-
-  URI: git://git.yoctoproject.org/meta-intel
-  layers: intel
-  branch: master
-
-
-Patches
-=======
-
-Please submit any patches against this BSP to the Yocto mailing list
-(yocto@yoctoproject.org) and cc: the maintainer:
-
-Maintainer: Kishore Bodke <kishore.k.bodke@intel.com>
-
-Please see the meta-intel/MAINTAINERS file for more details.
-
-Table of Contents
-=================
-
- I. Building the meta-cedartrail BSP layer
-II. Booting the images in /binary
-
-
-I. Building the meta-cedartrail BSP layer
-=========================================
-
-In order to build an image with BSP support for a given release, you
-need to download the corresponding BSP tarball from the 'Board Support
-Package (BSP) Downloads' page of the Yocto Project website.
-
-Having done that, and assuming you extracted the BSP tarball contents
-at the top-level of your yocto build tree, you can build a cedartrail 
-image by adding the location of the meta-cedartrail layer to
-bblayers.conf, along with the meta-intel layer itself (to access
-common metadata shared between BSPs) e.g.:
-
-        yocto/meta-intel \  
-        yocto/meta-intel/meta-cedartrail \
-
-To enable the cedartrail layer that supports Power VR graphics,
-add the cedartrail MACHINE to local.conf:
-
-  MACHINE ?= "cedartrail"
-
-Power VR Graphics user-space driver binaries are covered by a
-"Intel Free Distribution Binary License". The build of this driver
-can be enabled by adding the following line to the local.conf file:
-
-LICENSE_FLAGS_WHITELIST += "license_cdv-pvr-driver_1.0.3"
-
-To enable the layer that does not support Power VR graphics
-add the following to the local.conf file:
-
- MACHINE ?= "cedartrail-nopvr"
-
-
-You should then be able to build a cedartrail image as such:
-
-  $ source oe-init-build-env
-  $ bitbake core-image-sato
-
-The above image will not give you the webkit feature and will not
-have the Audio and Video media samples in the image.
-
-If you want the webkit feature and Audio , Video media samples built
-into the image by default, You should build the custom image by 
-doing the following:
-
-  $ source oe-init-build-env
-  $ bitbake core-image-cdv-media
-
-At the end of a successful build, you should have a live image that
-you can boot from a USB flash drive (see instructions on how to do
-that below, in the section 'Booting the images from /binary').
-
-NOTE: The 'cedartrail' machine will include support for hardware video
-acceleration via gstreamer if and only if the "commercial" string is
-added to the the LICENSE_FLAGS_WHITELIST variable in your local.conf.
-
-For example:
-
-  LICENSE_FLAGS_WHITELIST = "license_cdv-pvr-driver_1.0.3 commercial"
-
-The reason this is needed is to prevent the image from including
-anything that might violate the license terms of the packages used to
-implement the the video acceleration feature, such as gst-ffmpeg and
-ffmpeg.  As always, please consult the licenses included in the
-specific packages for details if you use packages that require
-particular LICENSE_FLAGS.
-
-As an alternative to downloading the BSP tarball, you can also work
-directly from the meta-intel git repository.  For each BSP in the
-'meta-intel' repository, there are multiple branches, one
-corresponding to each major release starting with 'laverne' (0.90), in
-addition to the latest code which tracks the current master.  Instead
-of extracting a BSP tarball at the top level of your yocto build tree,
-you can equivalently check out the appropriate branch from the
-meta-intel repository at the same location.
-
-
-II. Booting the images in /binary
-==================================
-
-This BSP contains bootable live images, which can be used to directly
-boot Yocto off of a USB flash drive.
-
-Under Linux, insert a USB flash drive.  Assuming the USB flash drive
-takes device /dev/sdf, use dd to copy the live image to it.  For
-example:
-
-# dd if=core-image-sato-cedartrail-20120105232035.hddimg of=/dev/sdf
-# sync
-# eject /dev/sdf
-
-This should give you a bootable USB flash device.  Insert the device
-into a bootable USB socket on the target, and power on.  This should
-result in a system booted to the Sato graphical desktop.
-
-If you want a terminal, use the arrows at the top of the UI to move to
-different pages of available applications, one of which is named
-'Terminal'.  Clicking that should give you a root terminal.
-
-If you want to ssh into the system, you can use the root terminal to
-ifconfig the IP address and use that to ssh in.  The root password is
-empty, so to log in type 'root' for the user name and hit 'Enter' at
-the Password prompt: and you should be in.
-
-----
-
-If you find you're getting corrupt images on the USB (it doesn't show
-the syslinux boot: prompt, or the boot: prompt contains strange
-characters), try doing this first:
-
-# dd if=/dev/zero of=/dev/sdf bs=1M count=512
-
-Miscellaneous Notes
-====================
-
-Video and Music Samples
------------------------
-This BSP includes recipes to download Ogg format video and
-music files that can be played-back with the Video and music players
-included in the sato images.  The sample files are installed in
-/home/Music and /home/Videos directories.
-
-
-Adding Glxgears to image
--------------------------
-Glxgears can be added to the generated image by adding "tools-testapps"
-option to the extra image features variable in the default local.conf
-before building the BSP.
-
-e.g. to add Glxgears, locate the following line in local.conf
-EXTRA_IMAGE_FEATURES = "debug-tweaks"
-
-and change above line to..
-
-EXTRA_IMAGE_FEATURES = "debug-tweaks tools-testapps"