summaryrefslogtreecommitdiffstats
path: root/recipes-bsp
Commit message (Collapse)AuthorAgeFilesLines
* apptrk: update to 873f44cTing Liu2016-08-121-3/+3
| | | | | | | | | Changelog: 873f44c Use unified EULA file f0ef785 Update End-User License Agreement df1f1d8 ARM Support for hardware breakpoints and watchpoints Signed-off-by: Ting Liu <ting.liu@nxp.com>
* rcw: update to 1af724bChunrong Guo2016-08-121-10/+8
| | | | | | | | | | | | | | | | | | | | | | * change license to Freescale-EULA * add tcl-native to DEPENDS as byte_swap.tcl is needed to run * run byte_swap.tcl for all the boards * update COMPATIBLE_MACHINE to support ls1043a, and exclude ls2080a Changelog: 1af724b update End-User License Agreement 76854c9 ls1043aqds: revise the description of SERDES1 Protocol 0x3358 970cc5d ls1043aqds: add SATA support under QSPI boot 017ed94 ls1021a/ls1043a: byte_swap: should 8 byte alignment ea90914 ls1021a: remove the unnecessary PBI 3f37603 ls1043aqds: Clear SerDes RxBoost on lane D cbf49c1 LS1043a-RDB: Add RCW files for UEFI bootloader 419bd59 ls1043ardb: SECURE_BOOT- RCW added ae3461a qe-tdm: add qe-tdm support on ls1043ardb 26042fa ls1043ardb: Add RCW for ls1043ardb board 4ae7fc3 ls1043aqds: Add RCW for ls1043aqds board Signed-off-by: Ting Liu <ting.liu@nxp.com>
* qe-ucode: update to a95f42aeTing Liu2016-08-121-5/+4
| | | | | | | | | | | Changelog: a95f42a Unify the EULA file 441e947 Update the EULA file update the license file add fsl-ch2 as COMPATIBLE_MACHINE Signed-off-by: Ting Liu <ting.liu@nxp.com>
* u-boot-fslc: Bump to revision ae973bcDaiane Angolini2016-08-121-1/+1
| | | | | | | | | | It includes the following changes: ae973bc warp7: Select secure boot b66cb5f warp7: Modify fdt_file environment variable Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Bump revision to 16a2670Otavio Salvador2016-08-052-2/+2
| | | | | | | | | | | This backport following changes from upcoming 2016.09 release: 16a2670 arm: imx: Add support for Advantech DMS-BA16 board b5e61c4 mx7dsabresd: Print secure/non-secure mode info 28830fe mtd: nand: mxs: fix cache alignment for cache lines >32 Change-Id: I332effe171f58f814f5f525e835b22f6e54e5601 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Bump to revision e38d99fOtavio Salvador2016-08-052-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This backport following changes from upcoming 2016.09 release: e38d99f MAINTAINERS: i.MX: Add board/freescale/*mx* path aad9e75 mx7dsabresd: MAINTAINERS: Add mx7dsabresd_secure_defconfig c40981b mx7_common: initialize generic timer on all CPU's bb7dbb1 mx6ul_14x14_evk: Remove unused define 1f89a59 cgtqmx6eval: Remove uneeded PHYS_SDRAM_SIZE 5433e5c novena: Remove uneeded PHYS_SDRAM_SIZE 97145ad bx50v3: Use imx_ddr_size() for calculating the DDR size 557c86a aristainetos: Use imx_ddr_size() for calculating the DDR size f2ff911 warp: Use imx_ddr_size() for calculating the DDR size 7b53769 warp7: Move some USB configuration options to defconfig bc7bbb5 colibri_imx7: add Colibri iMX7S/iMX7D module support c2381c0 cgtqmx6eval: Replace is_mx6q() for macro 9280131 mx6cuboxi: Replace is_mx6q() for macro 5396047 wandboard: Replace is_cpu_type() for macro ccbd486 imx: ventana: add dt fixup for watchdog external reset 6da2a41 imx: ventana: refactor board-specific dt fixups (no functional change) f13197c imx: ventana: make hwconfig initialize based on board configuration 505d466 imx: ventana: add extra DIO's for GW5520 ede70ae imx: ventana: make number of digital I/O's dynamic 85327cb imx: ventana: make RS232 enable board specific 67d376a imx: ventana: re-enable late board info display 1f71a76 imx: ventana: default pci to disabled 71fbd29 pci: allow disabling of pci init/enum via env e315991 imx: ventana: add dt fixup for eth1 mac-address c8bfa71 imx: ventana: add dt fixup for GW16082 irq mapping 6308105 mx7dsabresd_secure_defconfig: Use CONFIG_ARMV7_BOOT_SEC_DEFAULT 6eae48f pico-imx6ul: drop warning due to redefined c5502fb mx6: wandboard: fix warning due to missing prototype a9fef43 Fix build for mx7dsabresd (secure config) Change-Id: I1fa2a8a4db9d265494831deef53a11633faf3454 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Bump revision to 9da4a42Fabio Berton2016-08-052-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This includes following changes: - 9da4a42 Revert "imx_common: Return MMCSD_MODE_FS in spl_boot_mode() also for EXTFS" - 7be8ff4 serial_mxc: Remove unconditional DCE setting - 6dec211 mx6: clock: Fix the logic for reading axi_alt_sel - 68f2c3e Revert "arch-mx6: fix MX6_PAD_DECLARE macro to work with MX6 duallite" - 2fd99ea imx_watchdog: add weak attribute to reset_cpu function - c782384 mx7_common: use Kconfig for ARMv7 non-secure mode - b8cc70e mx7_common: Put display board info config into board file - 72a9967 mx7: set soc environment according to exact SoC type - ff3ecc4 usb: ehci-mx6: introduce config for high active power pin - 97488b5 usb: ehci-mx6: configure power polarity in usb_power_config - ce0c796 usb: move CONFIG_USB_EHCI_MX7 to Kconfig - e22ac58 dm: imx: serial: Support DTE mode when using driver model - 65db95b warp7: Remove CONFIG_BOOTDELAY variable - 1231d04 ARM: configs: cm_fx6: add mtd support - 14619b5 ARM: board: cm_fx6: fixup mtd partitions in the fdt - 9fa3af0 fdt_support: define stub for fdt_fixup_mtdparts - f1a2b56 ARM: configs: cm_fx6: improve default environment - d1e28f0 pico-imx6ul: Add PMIC support - 292806e wandboard: move environment partition farther from u-boot.img - 8b5df31 Revert conversion for config_distro_bootcmd.h - 9222180 Merge pull request #11 from Kynetics/2016.07+fslc - 1207b97 warp: Change default bootenv configuratio Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-kobs: Allow kobs-ng to flash the SPL on the 4.x kernelFabio Berton2016-08-053-0/+81
| | | | | | | | | | | | Add function to check if kernel support raw_mode and fix function that calculates the geometry based on known info from the mtd partitionmtd geometry. These patches were copied from: https://github.com/Gateworks/openwrt/commit/379e87df4fb67198fe900ffe2a394e69fbd47801 Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-qoriq: Add host compiler flagsTing Liu2016-07-221-1/+2
| | | | | | | | | | | | | U-Boot will compile its own tools during the build, with specific configurations (aka when CONFIG_FIT_SIGNATURE is enabled) the host tools require openssl. This patch adds 'openssl' as a PACKAGECONFIG that enables the use of openssl-native as a dependency and also adds the HOSTCC flags that U-Boot uses when compiling the host tools. (From OE-Core rev: 7d0edf5d04fba0b642bfb08a1de28fbc8e480209) Signed-off-by: Ting Liu <ting.liu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-qoriq: set LOCALVERSION to +fslTing Liu2016-07-221-6/+5
| | | | | | | | | SDK_VERSION defaults to nodistro.0 which is not expected in this recipe. Also adjust the location of some settings, no code change. Signed-off-by: Ting Liu <ting.liu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-qoriq: add DEPENDS for qoriq-arm64Ting Liu2016-07-221-0/+1
| | | | | Signed-off-by: Ting Liu <ting.liu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-qoriq: remove duplicate settings with oe-coreTing Liu2016-07-221-9/+2
| | | | | Signed-off-by: Ting Liu <ting.liu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-qoriq: switch to new UBOOT_CONFIG formatTing Liu2016-07-221-87/+13
| | | | | | | | | | | | By using the new UBOOT_CONFIG format, the final u-boot binary will be configured in machine config file, and will be processed in upstream u-boot.inc. Remove the codes to copy final u-boot binary, and append the special steps which need boot-format/byte_swap tool to regenerate the binary. Signed-off-by: Ting Liu <ting.liu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-qoriq: upgrade to 2016.01 plus fsl patchesTing Liu2016-07-224-134/+2
| | | | | | | | | | | | | | | | | | | | | | The main features are: * Upgrade to 2016.01 * On ARM platforms, the U-Boot image includes the device tree * Non-secure and Secure Boot (ESBC) * Primary Protected Application (PPA) firmware integration [LS1043A] * Clock, CPLD, DUART, DDR3, DDR4, DSPI, eSDHC, GIC-400, GIC-500, I2C, OCRAM, PCIe, USB 2 & 3, SATA, UART * Networking support using eTSEC, FMAN Independent Mode or DPAA2 networking * DCU, eMMC 4.5, I2C3, LPUART, QSPI [LS1021A] * eLBC and IFC access to NOR and NAND flash * Boot from NOR, NAND flash, eSPI, SDHC * Boot from SRIO [B4860, P5020, P4080] * Voltage ID (board specific) * CodeWarrior debug patch for U-Boot Detailed commit log can be found at: http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/log/?h=sdk-v2.0.x Signed-off-by: Ting Liu <ting.liu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* ls2-phy: Add recipeZongchun Yu2016-07-221-0/+27
| | | | | Signed-off-by: Zongchun Yu <zongchun.yu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* ls2-rcw: Add recipeZongchun Yu2016-07-221-0/+29
| | | | | Signed-off-by: Zongchun Yu <zongchun.yu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* ppa: add recipeChunrong Guo2016-07-222-0/+70
| | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* change-file-endianess: keep 8 byte alignmentYuan Yao2016-07-221-1/+8
| | | | | Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Bump revision to 20b081aOtavio Salvador2016-07-152-2/+2
| | | | | | | | | | | | | | | Besides the 2016.07 final changes, this includes following new commits: 20b081a usbarmory: Add board_run_command() function 19900ff usbarmory: switch to using kernel zImage 9f616f6 imx6: clock: typo fix 6874a9e arch-mx6: fix MX6_PAD_DECLARE macro to work with MX6 duallite 5f816d8 pico-imx6ul: Add USB Host support 3a09cf7 video: allow version string to be optional when using LOGO Change-Id: I5d3da661ef6f8e0a766950bb4fcecc7813a19a46 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Upgrade to 2016.07-based forkOtavio Salvador2016-07-153-9/+9
| | | | | | | | This upgrades for the upcoming 2016.07 release. This is based on top of 2016.07-rc3 plus i.MX pending patches. Change-Id: I6abdde5f7ada253f62c3adc884a497888a609db8 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Bump revision to 3106462Otavio Salvador2016-07-152-2/+2
| | | | | | | | | | This includes following fixes: 3106462 mx7dsabresd: Fix the boot of a NXP kernel 401468c mx7: Place MX7_SEC option in Kconfig Change-Id: If54a89f104a6d340df911c43ba4b22f526aa6c65 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot: fix build error under gcc6Zhenhua Luo2016-06-032-0/+87
| | | | | | | | | Fix the following build error under gcc6: | ../include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory | #include gcc_header(__GNUC__) Signed-off-by: Zhenhua Luo <zhenhua.luo@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to revision 6e4d8c5Fabio Estevam2016-06-022-2/+2
| | | | | | | | This includes the following commit from U-Boot fslc: 6e4d8c5 pico-imx6ul: Select CONFIG_HUSH_PARSER option Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to revision 158a5196Otavio Salvador2016-06-022-2/+2
| | | | | | | This merges the changes of final 2016.05 release on top of FSLC fork. Change-Id: I99179beec9a75aead1bbe27de689005b9d129490 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-vpu: Set PACKAGE_ARCH to MACHINE_ARCHOtavio Salvador2016-06-021-0/+2
| | | | | | | | | The imx-vpu is a machine specific package, as it depends on the kernel for build. We are going to change the PACKAGE_ARCH of it to be MACHINE_SOCARCH as the interface provided by it is stable thus not requring that the library users to be rebuild. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to 2016.05-based forkOtavio Salvador2016-05-163-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The U-Boot 2016.05 is close to release and it is time to upgrade. This includes following changes on top of upcoming release, which are Yocto Project related: 0fcd279 wandboard: Drop revision specific DeviceTree support 0ab586a mx6sabresd: Enable video interfaces in bootargs 5976978 Revert "embestmx6boards: convert to use config_distro_bootcmd.h" 91f4fa5 iMX6: Change mmcroot to use fixed mmc block index for USDHC 968d872 embestmx6boards: Change default bootenv configuration 3233072 mx6sabresd: Use LDO dtb file until LDO bypass support is added df5f668 mx6slevk: Use LDO dtb file until LDO bypass support is added The following changes are included here, and queued for U-Boot 2016.07 release: a858d98 ARM: mx6: Enable MMC and SATA extfs boot support 70f4d22 SPL: Add CONFIG_SPL_ABORT_ON_RAW_IMAGE 5054e50 SPL: Let spl_parse_image_header() return value bf9c724 imx: imx-common: print i.MX 7 SoC names consistently dd6d9db imx: imx7d: fix ahb clock mux 1 24f4bb6 imx: iomux-v3: fix UART input selects 83609b3 ARM: mx6: Enable STDIO deregistering on Novena 0fc4e56 imx: mx6: mx6sl_pins: add GPIO variant for SD1_DAT5 ffae8c1 imx: tools: imximage: fix CLR bit command Change-Id: I82aba59b47dfe530a6a1243f3227b914b973205f Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* asound.state: Update to 4.1.15-1.1.0Yuqing Zhu2016-05-161-44/+62
| | | | | | | | | | | | | | --Update wm8960audio configuration for mx6ul/mx7 1."Capture Switch" has been enabled, and 'Capture Volume' will make sense. The current 'Capture Volume' value is the max value 63. So need to modify the capture volume. 2.Add ADC data output select. 3.Remove amixer control 'Headset Jack' as mx7d-sdb doesn't have it. --Adding sii902xaudio configuration for mx7 Signed-off-by: Yuqing Zhu <carol.zhu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* asound.conf: Update asound.conf to set default ctrl for kernel 4.1Yuqing Zhu2016-05-161-0/+5
| | | | | | | | | The default ctrl is missing from /etc/asound.conf. If don't using “-Dhw:0”, the sound will rout from alsa to pulseaudio, then to the sound device. Signed-off-by: Yuqing Zhu <carol.zhu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-test: Stop using base_containsOtavio Salvador2016-05-161-1/+1
| | | | | | | | The base_contains function is deprecated and we ought to use bb.utils.contains instead. Change-Id: I44c95999b80235d4d7a26b0eac6bf671887a69c2 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* barebox: Stop using base_containsOtavio Salvador2016-05-161-1/+1
| | | | | | | | The base_contains function is deprecated and we ought to use bb.utils.contains instead. Change-Id: Iedb13dd05f9039ce2dd6b52b4057fd2092ce0c98 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-test: Upgrade to 5.4.1 releaseLauren Post2016-05-072-8/+8
| | | | | | | | | - mmdc fixes to add 6ul support - mmdc fixes to add ipu2 and gpuvg support got i.MX 6QuadPlus - mx6s_v4l2_capture fixes for memory leak Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-imx: Update to 4.1.15-1.1.0 releaseLauren Post2016-05-071-1/+1
| | | | | | | Includes support for i.MX 6UltraLite T1.1 silicon. Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-imx: Change UBOOT_SRC to SRC_URI to fix fetch issuesLauren Post2016-05-071-1/+1
| | | | | | | Mistake in usptreaming 4.1.15-1.0.0 - should use SRC_URI instead of UBOOT_SRC Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-kobs: Fix compiler error with Linux kernel headers version >= 4.4Gary Thomas2016-04-192-1/+20
| | | | | | | | | This patch fixes a build error with kernel includes (>= 4.4) <stdint.h> must be explicitly included to get uintX_t types. Change-Id: I3a0059a59bf578fdba0cf68370eec0e19fc10835 Signed-off-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-test: Fix build for X11 backendOtavio Salvador2016-04-192-17/+3
| | | | | | | | | The root case of the addition of the dependencies on the recipe was that it were not being correctly included in the .inc file. This fixes it and remove the duplication. Change-Id: Ie9ee5fbc2a61915ce109473f5df2b8e88d3966c4 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-imx: Upgrade to updates from imx_4.1.15-1.0.0_ga releaseLauren Post2016-04-191-4/+4
| | | | | Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-test: Upgrade to 5.4 versionLauren Post2016-04-192-8/+21
| | | | | | | | | | | | | | | | | | | | | - Restructure to support building all test cases on all machines regardless of harware support - mx6s_v4l2_capture: Fix resource leak reported by coverity - memtool: Fix string not null - Fix resource leak problem reported by coverity - mxc_i2c_slave_test: Fix argument cannot be negative problem reported by coverity - mxc_spi_test1: Fix resource leak problems reported by coverity. - mxc_vpu_test: Encode and decode MPEG file in one app failed with return value - mxc_v4l2_capture: Handle usb camera restriction which does not support CROP feature - mxc_mlb_test: Fix out of bounds access reported by coverity - soc_check: Remove unnecessary operation in soc_check.h - mxc_epdc_v2_fb: Initialize upd_data.dither_mode to 0 to avoid the spurious "unsupported quantization bit number" error message. - mxc_sim_test: When sim card doesn't exist, no atr can be received. The application should directly return with corresponding error value. - Remove legacy platform restriction to shell scripts - only support mx6 and mx7 SoC now. Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-vpu: Upgrade to 5.4.33 versionLauren Post2016-04-192-11/+11
| | | | | | | | VPU firmware has been changed to the format of Linux codec driver firmware. Change VPU library to adapt to firmware format change. Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-lib: Upgrade to 5.4 versionLauren Post2016-04-192-10/+10
| | | | | | | | | - Remove platform check in hdmi-cec and imx-lib - simplify to support builds on multiple machines - For ipu use the dummy defaul object to fix build issues on non-ipu hardware Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-kobs: Upgrade to 5.4 versionLauren Post2016-04-191-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Check raw mode flag for backward compatbility - Fix membership name in bch geometry structure. - Fix the previous implementation that may ruin the BBM - Adapt raw page accesses to match the new raw_read/write implementation The old raw access implementation (in GPMI driver) was considering that data and OOB data were separated in their respective regions (the data area and the OOB area of the page), which is not true. They are actually interleaved this way: METADATA + ((DATA + ECCBYTES) * N) The new raw access implementation (in the GPMI driver) is hiding this weird layout to MTD users by exposing a more common layout: DATA + METADATA + (N * ECCBYTES) Here METADATA + (N * ECCBYTES) are exposed as if they were stored in the OOB area. Unfortunately kobs-ng rely on this weird layout when accessing the NAND in raw mode. Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* firmware-imx: Upgrade to 5.4 versionLauren Post2016-04-193-9/+10
| | | | | | | | | | | | - Upgrade to FW v3.1.1_r46072 - v3.1.1_r46070 plus 2 patches 391/392 - FSLARIK-391 [Decoder/H.264] VPU is always busy when decoding an erroneous H264 bitstream - FSLARIK-392 [Decoder/VC1] VPU outputs only 1 picture - Change to the format of Linux coda driver firmware Signed-off-by: Lauren Post <lauren.post@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to 1e82446 revisionOtavio Salvador2016-04-192-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | This brings following backports/fixes: 1e82446 mx6slevk: imximage.cfg: update to fix tINIT3 and tIH-CA violations e578035 mx6qarm2: imximage_mx6dl.cfg update to fix tINIT3 violation adc86d5 mx7_common: Define CONFIG_SYS_MALLOC_LEN in the board file 83195c2 warp7: Pass the UART base definition 87a2283 mx6sabresd: Remove unneeded enable_lvds() function 8f1927e arm: mxs: Update MX28EVK config db8b958 mx6sabresd: Use VESA 1024x768 timings 49185d3 mx27: 16-bit wide watchdog registers cfc4a96 mx6sabre_common: Fix U-Boot corruption after 'saveenv' d955806 arm: mx5: Enable NAND TrimFFS on M53EVK 0aea495 imx: print ARM clock for clocks command 1a1ac16 imx: mx6ul configure the PMIC_STBY_REQ pin as open drain 6f8ee92 imx: mx6ul: skip setting ahb rate 60b774d imx: mx6: Fix incorrect clear mmdc_ch0 handshake mask fe3704b Revert conversion for config_distro_bootcmd.h 8a68957 Revert "warp7: Add initial support" Change-Id: I7a04b21f4ec9aac0a58adb1233d208b1ae2c3258 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-uuc: Add dosfstools-native on DEPENDSFabio Berton2016-04-191-1/+1
| | | | | | | | | imx-uuc Makefile runs mkfs.vfat command and fails if it not available. We need to install dosfstools-native to provide this tool. Change-Id: Iadc9ce579bbe20b69ed27e3518b39009254d9cd0 Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* u-boot-fslc: Update to U-Boot 2016.03 based forkOtavio Salvador2016-04-194-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This updates the fork for the 2016.03 release. Currently following patches are applied on top of it: fd6b196 warp7: Add initial support f9dc5fe wandboard: Drop revision specific DeviceTree support b3e771e mx6sabresd: Enable video interfaces in bootargs e0a65b1 Revert "embestmx6boards: convert to use config_distro_bootcmd.h" af0e438 iMX6: Change mmcroot to use fixed mmc block index for USDHC 36a641b embestmx6boards: Change default bootenv configuration f97660e mx6sabresd: Use LDO dtb file until LDO bypass support is added 4064b09 mx6slevk: Use LDO dtb file until LDO bypass support is added f854376 imx: mx7d: move MX7D to Kconfig entry 8a29233 imx: mx6sx: move MX6SX to Kconfig entry d85319f arm: mx6: Add CCV xPress board support fe7917e arm: mx6: Add UART8 base address for i.MX6UL 8730cc5 arm: imx6: Switch DDR3 calibration to wait_for_bit() 91c85e8 warp7: Add initial support ca3306a mx7_common: Put early/late init configs into board file 1dfebcc mx7: Distinguish between dual and solo versions dfcf27d mx7dsabresd: Define serial port locally 95817e0 mx7_common: Remove unexisting options 78eb121 arm: imx: Add support for GE Bx50v3 boards Change-Id: I0e7ddd021fd87ffe8a5ad6916fd1eb7a3243b21b Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* alsa-state: Using one unified version to set configuration values for ↵Yuqing Zhu2016-04-195-1800/+618
| | | | | | | | | | | | | | | mx6/mx6ul/mx7 As i.MX6UL uses the SOC Family name as "mx6ul", need to add configuration for mx6ul separately. Unify the configuration files to be easy to maintain. For asound.conf, there is no change. For asound.state, wm8962/cs42888 audio configuration for mx6. wm8958/wm8960 audio configuration for mx6ul/mx7. Signed-off-by: Yuqing Zhu <carol.zhu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* classes/u-boot: Update getVar syntaxZhenhua Luo2016-04-191-3/+3
| | | | | | | | | | | | | | | | This runs: sed -e 's:\(\.getVar([^,()]*\)):\1, False):g' -i `grep -ril getVar *` on the layer to update the getVar usages without an expand parameter, This ensures the layer continues to work with bitbake master. There is no functionality change although some of these sites may benefit from expand=True. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Zhenhua Luo <zhenhua.luo@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* EULA: Update to LA_OPT_BASE_LICENSE v10 November 2015Lauren Post2016-04-192-2/+2
| | | | | Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* firmware-imx: Upgrade to 5.3 versionLauren Post2016-04-192-8/+8
| | | | | | | | | - Add basic epdc firmware copy to correct output path - Move legacy epdc firmware to this package out of kernel - VPU firmware upgrade to v3.1.1_r46070 Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* formfacor: Add generic machconfig formfactors for i.MX 6UltraLite and 7DualLauren Post2016-04-192-0/+22
| | | | | Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* imx-uuc: Upgrade to 0.5.1 versionLauren Post2016-04-191-4/+4
| | | | | | | | Support a dummy fat file to vaoid windows popup format dialog when using manufacturing tool. Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-05-15 05:55:51 +0000