conf: machine: mx8m[m,n,p]: use boot container class

Use the new boot container build on mainline BSP for mx8mm, mx8mn
and mx8mp machines.

Boot container serves as a replacement for imx-boot package present
in NXP BSP, and is created by U-Boot build system.

Define ATF machine name and required load address.

Define dependency on firmware package, as it provides DDR firmware
binaries needed to construct boot container.

Signed-off-by: Andrey Zhizhikin <andrey.z@gmail.com>

2 files changed, 14 insertions, 4 deletions

diff --git a/conf/machine/include/imx8mm-evk.inc b/conf/machine/include/imx8mm-evk.inc
index 20bc9b77f..6f21ce8eb 100644
--- a/conf/machine/include/imx8mm-evk.inc
+++ b/conf/machine/include/imx8mm-evk.inc
@@ -1,4 +1,4 @@
-MACHINEOVERRIDES =. "mx8:mx8m:mx8mm:"
+MACHINEOVERRIDES =. "imx-boot-container:mx8:mx8m:mx8mm:"
 
 require conf/machine/include/imx-base.inc
 require conf/machine/include/tune-cortexa53.inc
@@ -27,6 +27,10 @@ UBOOT_CONFIG[mfgtool]  = "${UBOOT_CONFIG_BASENAME}_defconfig"
 SPL_BINARY = "spl/u-boot-spl.bin"
 
 ATF_PLATFORM = "imx8mm"
+ATF_LOAD_ADDR = "0x920000"
+
+# Extra firmware package name, that is required to build boot container for fslc bsp
+IMX_EXTRA_FIRMWARE = "firmware-imx-8m"
 
 IMXBOOT_TARGETS = "${@bb.utils.contains('UBOOT_CONFIG', 'fspi', '${IMXBOOT_TARGETS_BASENAME}_flexspi', '${IMXBOOT_TARGETS_BASENAME}', d)}"
 
@@ -36,10 +40,11 @@ SERIAL_CONSOLES = "115200;ttymxc1"
 
 LOADADDR = ""
 UBOOT_SUFFIX = "bin"
-UBOOT_MAKE_TARGET = ""
+UBOOT_MAKE_TARGET = "all"
 IMX_BOOT_SEEK = "33"
 
 OPTEE_BIN_EXT = "8mm"
+TEE_LOAD_ADDR = "0xbe000000"
 
 # Add additional firmware
 MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
diff --git a/conf/machine/include/imx8mn-evk.inc b/conf/machine/include/imx8mn-evk.inc
index 8e68f2fe4..265b594c9 100644
--- a/conf/machine/include/imx8mn-evk.inc
+++ b/conf/machine/include/imx8mn-evk.inc
@@ -1,4 +1,4 @@
-MACHINEOVERRIDES =. "mx8:mx8m:mx8mn:"
+MACHINEOVERRIDES =. "imx-boot-container:mx8:mx8m:mx8mn:"
 
 require conf/machine/include/imx-base.inc
 require conf/machine/include/tune-cortexa53.inc
@@ -28,6 +28,10 @@ UBOOT_CONFIG[mfgtool] = "${UBOOT_CONFIG_BASENAME}_defconfig"
 SPL_BINARY = "spl/u-boot-spl.bin"
 
 ATF_PLATFORM = "imx8mn"
+ATF_LOAD_ADDR = "0x960000"
+
+# Extra firmware package name, that is required to build boot container for fslc bsp
+IMX_EXTRA_FIRMWARE = "firmware-imx-8m"
 
 IMXBOOT_TARGETS = "${@bb.utils.contains('UBOOT_CONFIG', 'fspi', '${IMXBOOT_TARGETS_BASENAME}_flexspi', '${IMXBOOT_TARGETS_BASENAME}', d)}"
 
@@ -38,7 +42,7 @@ SERIAL_CONSOLES = "115200;ttymxc1"
 BOOT_SPACE = "65536"
 LOADADDR = ""
 UBOOT_SUFFIX = "bin"
-UBOOT_MAKE_TARGET = ""
+UBOOT_MAKE_TARGET = "all"
 
 # Image boot offset as defined in section 6.1.6.1 "Primary image offset and IVT offset" of
 # i.MX 8M Nano Applications Processor Reference Manual, Rev. 0, 12/2019
@@ -46,6 +50,7 @@ UBOOT_MAKE_TARGET = ""
 IMX_BOOT_SEEK = "32"
 
 OPTEE_BIN_EXT = "8mn"
+TEE_LOAD_ADDR = "0x56000000"
 
 # Add additional firmware
 MACHINE_FIRMWARE_append = " linux-firmware-ath10k"