linux/meta-freescale.git/wic, branch topic/fix-spl-binary

imx-imx-boot-bootpart.wks.in: Fix overlap of imx-boot and boot partitions

2020-02-12T12:21:00+00:00

The u-boot env offset in the imx-boot partition is 4MiB, so set the boot partition alignment to 8MiB to fix the overlap. Signed-off-by: Tom Hochstein

imx-imx-boot-bootpart.wks.in: Fix the layout comment

2020-02-12T12:21:00+00:00

The layout comment was incorrect. It was missing the start of the rootfs and what was there wasn't updated when the boot partition was increased to 64MiB. Signed-off-by: Tom Hochstein

wic: Fix image generation for i.MX with SPL and U-Boot

2019-07-11T12:59:17+00:00

Some boards expects a specific binary name. Example : Pico i.MX7D required the u-boot-dtb.img file (instead of u-boot.img). Signed-off-by: Joris Offouga

imx-imx-boot-bootpart.wks.in: increase boot partition to 64m

2019-04-23T12:55:07+00:00

The i.MX8 / i.MX8X kernel's size is about 22MB. Increase the boot partitions minimum size to have space for two kernel images and have a constant partition size. Signed-off-by: Max Krummenacher

wic: Fix image generation for i.MX with bootpart script

2019-04-14T15:31:18+00:00

Some boards expects a specific binary name. Example : WaRP7 required the u-boot-dtb.imx file (instead of u-boot.imx). Signed-off-by: Pierre-Jean Texier Signed-off-by: Joris Offouga

imx-imx-boot-bootpart.wks: change default offset of bootloader

2019-01-29T17:03:40+00:00

The i.MX 8QXP bootrom in B0 silicon reads the 1st image container at offset 32k while tha A0 silicon started at 33k. The machine configurations already contain the variable IMX_BOOT_SEEK to specify the needed offset. Change the wks file accordingly. Signed-off-by: Max Krummenacher

wic:mx8: Create wks file for imx8 family using imx-boot

2019-01-10T16:54:39+00:00

imx8 family boards use u-boot as boot loader in addition to some other binaries. The final bootloader binary is gathered by mkimage into a file called imx-boot. Add the wks file to create the wic image tailored for imx8 family. Set the wks file as default for all imx8. Signed-off-by: Daiane Angolini

image_types_fsl.bbclass: Use IMAGE_LINK_NAME for mxs binaries

2018-09-26T17:55:29+00:00

The binary is generated as part of the image build so it should use the same naming schema to provide consistency. This also fixes the wks templates which use it. Signed-off-by: Otavio Salvador

Remove barebox and imx-bootlets

2018-07-03T21:41:20+00:00

Those are untested and anyone interested in supporting them (mainly barebox) ought to send the support to OE-Core instead. This also removes the corresponding code from the image_types_fsl.bbclass as it is not going to be used from now on. Signed-off-by: Otavio Salvador

wic: Fix image generation for i.MX MXS SoC family

2018-07-03T21:41:08+00:00

The image needs to use the U-Boot generated, for the uSD card, so a dependency on that must be added to ensure the file is available prior 'wic' uses it. Besides that, the fstype needs to be changed so it sets the partition mark allowing the bootrom to find it. Signed-off-by: Otavio Salvador