Move meta-fsl-ppc content to layer root

2015-07-29T02:26:59+00:00

This commit is just a rename of all contents of meta-fsl-ppc subdirectory to this layer's root, merging the contents of common files, subsequent changes are based on top of that. Signed-off-by: Otavio Salvador

u-boot-qoriq: update to revision v2015.01-630-g6ba8eed

2015-07-29T02:26:58+00:00

Changes: 1. Rebased on git://git.denx.de/u-boot.git v2015.01-487-gab92da9 2. Applied another 143 FSL/backported patches (git log ab92da9..6ba8eed) 3. run script genboardscfg.py to generate boards.cfg firstly The detailed 143 patches are: 6ba8eed DM: crypto/rsa_mod_exp - Correct copyright on rsa-mod-exp.h d7cfd64 t4rdb: fix reset altbank ab547e7 t4240qds: update rcw to support 1.8GHz 488bca3 crypto/fsl: add support for multiple SEC engines initialization 5eaa15a arch/arm, arch/powerpc: add # of SEC engines on the SOC 2a10e25 arch/arm: add SEC JR0 offset 3851bc8 drivers/elbc:Memory leak fix 3def5c1 powerpc/t1024: update fman liodn for mac1 9ee5a72 T102xRDB: Enable ifc nand ecc encode and decode 03084cb mpc85xx/t104xd4rdb: Update DDR controller settings 98cb1fa T104xD4RDB: Fix PHY address for PHY connected to FM1@DTSEC3 dffab04 net/phy: set led for rtl8211f phy da6438e sf: Add support for flag status register on Micron chips 1e14807 powerpc: mpc85xx: Correct CONFIG_USB_MAX_CONTROLLER_COUNT for p1025 98a6712 mpc85xx/T104xRDB: Remove vbank check redundant code 06546ff powerpc/b4860qds:Update README for DIP switch information b5c2dd2 board/ls1021atwr: Enable bootscript for secure boot 270cea4 powerpc/t1042d4rdb: Update rcw.cfg e2bea76 drivers:usb:fsl: Remove board_usb_init() function cf9cfea drivers:usb:fsl: Return if USB_MAX_CONTROLLER_COUNT is incorrect 8986dfb board/t1040d4rdb: Disable all CPLD interrupts, except QSGMI1 and QSGMI2 6b01f67 arm/ls1021a: Remove ccsr_ddr from immap_ls102xa.h c0953d3 driver/ddr/fsl: Remove deskew_cntrl register 32ea516 arm: ls1021a: Remove the inappropriate use of the function 'sprintf' af1dbff Enable snooping on transactions from CAAM block 0e1f5e1 driver/qe: use strncpy instead of strcpy ef770a2 fsl/sata: Replace sprintf() with snprintf() 9238012 mpc85xx/t104x, t102x: Update CPC debug register value in PBI commands 651251d mpc85xx/t104x:Update README for PBL images c6e1fe8 driver/qe: transform parameter to compatible type 306c7fd powerpc/mpc85xx:Add GCC flag -fno-delete-null-pointer-checks 82db1ee crypto/fsl - enable raw data instead of von Neumann data 6606ff0 crypto/fsl - change starting entropy delay value 3d9d33c crypto/fsl - disable RNG oscillator maximum frequency check 9961bb6 P4080 : Added PAMU driver 4bc7e84 Revert "powerpc/mpc85xx: SECURE BOOT - Bypass PAMU in case of secure boot" 703824e mmc: fsl_esdhc: set ESDHCCTL[PCS] when selecting peripheral clk b80144c board/t2080rdb: reset cs4315 phy cd01a9d net/phy: refactor RTL8211F initialization 8ac0b92 drivers: usb: fsl: Implement Workaround for Erratum A004477 cb362dc mmc: fsl_esdhc: update eMMC44 adapter card erase timeout c93a3ea mpc85xx/T1042D4RDB: Select DIU in cpld mux for T1042D4RDB b176d64 fsl/deepsleep: avoid the DDR restore from being optimized out 6c3b324 arm: ls102xa: Disable regulation of outstanding read transactions for S2 37c695e board/t102x: use fdt_setprop_string instead of fdt_setprop 8f425d1 QE/DeepSleep: add QE deepsleep support for arm 5458df5 kbuild: include config.mk when auto.conf is not older than .config adb1487 ls1021aqds: config: remove default FB DCU support 14d9d27 board/t2080rdb: enable CONFIG_PHY_AQUANTIA 437a114 net/phy: fixup for get_phy_id dacfd54 boards/t2080rdb: update ddr frequency from 1600MT/s to 1867MT/s 1a8bad0 board/p1_p2_rdb_pc: Eliminate the FDT_ERR_NOTFOUND warnning 203635c fsl/pci: Set CFG_READY for PCIe v3.0 and later e7646b8 T104xD4RDB: Enable L2 Switch on T104xD4RDB board e593bba mmc: fsl_esdhc: Add peripheral clock support for t2080qds dfe7a91 mmc: fsl_esdhc: Add adapter card type identification support b878145 arm:ls1021a: Reserve secure code into RAM instead of OCRAM 575e280 ls1021a: ahci: Added workaround for erratum ERR008407 11e63c5 ls1021a: ahci: Added workaround for erratum ERR008402 2b07de2 ls1021a: ahci: Adjust the default settings 6dcb9ea cmd_scsi: Enable SoC AHCI device on platforms with PCI 3140296 T104xD4: Add Secure boot support for T104xD4 platforms. 2d40ae3 drivers:usb:fsl: Implement Erratum A-009116 for XHCI controller 887c1df board/t4240rdb: Enable CONFIG_SYS_CORTINA_FW_IN_NOR f6fb2b8 arm: ls102xa: Enable Driver Model SPI for ls1021atwr 738f236 arm: ls102xa: Enable Driver Model SPI for ls1021aqds 760ce9a arm: ls102xa: Enable CONFIG_DEFAULT_DEVICE_TREE to defconfig for ls1021a 22ad698 sf: Update AT45DB021D flash chip parameters a9e4bb1 sf: probe: Add support Atmel AT45DB series devices special commands 7b18162 dm: spi: Convert Freescale DSPI driver to driver model be352ab dm: spi: Convert Freescale QSPI driver to driver model d7f8021 dm: ls1021a: dts: Add QSPI dts node 8b64aa1 dm: ls1021a: dts: Update DSPI node to support DM SPI 480c575 dm: ls1021a: dts: Change address_cells and size_cells from 2 to 1 3e932cf dm: ls1021a: Bring in ls1021a dts files from linux kernel 91f9040 dm: arm: Bring in skeleton64 device tree file from Linux f62cbd5 dm: introduce dev_get_addr interface c807f2b dm: core: Ignore disabled devices when binding 77db7df dm: spi: Move slave details to child platdata dc7eeff dm: spi: Set up the spi_slave device pointer in child_pre_probe() 22a0a94 dm: core: Allow uclass to set up a device's child before it is probed da110a5 dm: core: Allow the uclass to set up a device's child after binding c6f8f43 dm: spi: Move the per-child data size to the uclass 6312dc6 dm: core: Allow uclasses to specify private data for a device's children 8258af5 dm: core: Add a flag to control sequence numbering 8a151f6 dm: core: Add a function to get a device's uclass ID facf860 dm: core: Add a post_bind method for parents 400bf5b dm: core: Allow uclasses to specify platdata for a device's children f4fc028 dm: core: Allow parents to have platform data for their children be86f28 dm: core: Allocate platform data when binding a device 2141dd9 dm: core: Tidy up error handling in device_bind() f3627ae dm: core: Set device tree node for root device 4472e2f net/phy: Add support for realtek RTL8211F 37d25d5 board/t208xrdb: VID support 52674c7 QE/DeepSleep: add QE deepsleep support for mpc85xx f7e6de8 powerpc/t1023rdb: Add T1023 RDB board support 81d2058 powerpc/t2080rdb: update ddr to support 1866MT/s 67b23a8 arm: ls102xa: workaround for cache coherency problem 839c88b mpc85xx/T104xD4RDB: Add T104xD4RDB boards support 1293181 T104xRDB : remove raw timing parameter 2ec98c2 pci/layerscape: fix link and class issues to support ls2085a 1fe92b5 pci/layerscape: remove unnecessary pcie_layerscape.h 70d18dd driver/pci: add Layerscape PCIe driver b9b27ae arm/ls1021a: add PCIe settings 6ea40af arm/ls102xa: use a array to define pexmscportsr acf3674 arm/ls102xa: create TLB to map PCIe region 450e7ee ls1021atwr: add hwconfig setting to do pin mux ae2b5a0 powerpc/t2080: enable erratum_a007186 for t2080 rev1.1 48f582d SECURE_BOOT: Disable IE Key feature for RAMBOOT eb75fb7 drivers:usb:fsl: Add affected SOCs for USB Erratum A007792 60bae11 drivers:usb: Check if USB Erratum A005697 is applicable on 913x 1498a63 ls-1/usb: Add USB support for ls1021atwr 1b3e623 ls-1/usb: Add XHCI support for ls1021aqds 621c3e2 ls102xa: config: Add USB XHCI controller base address for LS102XA 9322aab drivers: usb: fsl: Add USB XHCI stack support 920eae8 powerpc/mpc85xx: SECURE BOOT-Copy Boot Script on RAM 3b3c26f powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P5020 and P5040 d9b6ccf powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041 789db66 ls102xa: ddr4: Use LPUART as console output to verify DCU driver ae8ecf3 arm: ls102xa: Enable regulation of outstanding read transactions for slave interface S2 7d426cc arm: ls1021x: Add support for initializing CAAM's stream id 930f42f arm: ls102xa: Define default values for some CCSR macros 0193232 powerpc: 85xx: Modify CONFIG_USB_MAX_CONTROLLER_COUNT for P1022DS f5da45f drivers:usb: Add device-tree fixup to identify socs having dual phy bdf6935 Add bootscript support to esbc_validate. 64ea65b SECURE_BOOT : enable esbc_validate command for powerpc and arm platforms. eb82578 SECURE BOOT: Add command for validation of images 6f67c1b fsl_sec_mon: Add driver for Security Monitor block of Freescale e6aa74f fsl_sfp : Move ccsr_sfp_regs definition to common include cb9678a rsa : Compile Modular Exponentiation files based on CONFIG_RSA_SOFTWARE_EXP 0c489dc crypto/fsl - Add progressive hashing support using hardware acceleration. 9bc1528 crypto/fsl: Make function names consistent for blob encapsulation/decapsulation. 2fe7e4e rsa: Use checksum algorithms from struct hash_algo 5172da9 Use hash.c in mkimage 3043003 hash: Add function to find hash_algo struct with progressive hash f5082b7 lib/rsa: Add Kconfig for devices supporting RSA Modular Exponentiation f5c65f2 DM: crypto/fsl - Add Freescale rsa DM driver cbf5557 lib/rsa: Modify rsa to use DM driver 0b4c7ac configs: Move CONFIG_FIT_SIGNATURE to defconfig de5370a DM: crypto/rsa_mod_exp: Add rsa Modular Exponentiation DM driver 8f6a26f FIT: Modify option FIT_SIGNATURE in Kconfig 3b55114 rsa: Split the rsa-verify to separate the modular exponentiation 98583e8 net/phy/realtek: Disable interrupt on Realtek Ethernet PHY drivers Signed-off-by: Ting Liu Acked-by: Otavio Salvador Signed-off-by: Otavio Salvador

rcw: update to revision 426f7a6

2015-07-29T02:26:58+00:00

This imports following changes: 426f7a6 SECURE BOOT: Add missing RCW's for T4240QDS 756454f SECURE BOOT: Rename the RCW's 7782087 SECURE BOOT: Remove Unwanted RCW's e93c210 LS1021: Unset BOOT_HO bit in rcw. 4375fc4 t1023rdb: update IFC_MODE to 0x2F for errata A-009138 5cf9bc5 T4240QDS: Add four 1800MHz/Core RCW files for T4240QDS board cff536a t1023rdb: set RTC=1 to enable GPIO1[14] a5983f2 T4240RDB: Add one new RCW for T4240RDB board 3a6ae48 ls1021a: fix some serdes settings for SATA 31078e1 ls1021atwr: do not power down PLL which is used by SATA c6d72e3 t2080qds: rcw: Add eMMC DDR mode RCW c77415c T104xD4RDB: update SRDS_PLL_REF_CLK_SEL_S1 value e2c0844 ls1021atwr: add USB 2.0 support fd0c1df p5020/p5040: NAND Secure Boot RCW added with PBI commands 259d57d t1023rdb: add rcw for t1023rdb board c3ab906 T1042: Add t1042d4rdb rcw files for serdes protocol 0x86 ae39560 T1040: Add t1040d4rdb rcw files for serdes protocol 0x66 b9d3c22 p3041: NAND Secure Boot RCW added with PBI commands dc0fad9 t2080rdb: update ddr to 1866MT/s 03c5ee6 t2080: update platform clock to 600MHz 72945fa rcw: ls102xa: merge rcw for lpuart and dcu 6678741 rcw: ls102xa: Adjust the features supported in SD boot f7a54c1 arm: ls102xa: Increase IO drive strength for LS1021AQDS board 3dd07fa B4860-As-B3: Add two new RCW files 69a041c B4860QDS: Add HWA_CGA_M3_CLK_SEL bits define in b4860.rcwi file 87289d5 ls102xa: rcw: Add QSPI boot RCW for LS1021A TWR board 13bf692 t1024: update FM1_MAC_RAT from 0 to 1 5b94b3e t1024rdb: add new rcw 0x135 and minor update Also align with the one in meta-fsl-arm layer. Signed-off-by: Ting Liu Acked-by: Otavio Salvador Signed-off-by: Otavio Salvador

u-boot-qoriq: fix the build issue with binutils-2.25

2015-03-31T05:17:05+00:00

Remove _GLOBAL_OFFSET_TABLE_ definition from u-boot/mpc85xx/u-boot*.lds In binutils-2.25, the _GLOBAL_OFFSET_TABLE_ symbols defined by PROVIDE in u-boot.lds overrides the linker built-in symbols (https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commitdiff;h=b893397a4b1316610f49819344817715e4305de9), so the linker is treating _GLOBAL_OFFSET_TABLE_ as a definition into the .reloc section. To align with the change of binutils-2.25, the _GLOBAL_OFFSET_TABLE_ symbol should not be defined in sections, and the symbols in linker generated .got section should be used(https://sourceware.org/ml/binutils/2008-09/msg00122.html). Fixed the following build errors with binutils-2.25: | powerpc-poky-linux-gnuspe-ld.bfd: _GLOBAL_OFFSET_TABLE_ not defined in linker created .got [YOCTO #7145] Signed-off-by: Zhenhua Luo

u-boot: use TARGET_VENDOR to compose multilib sys

2015-01-22T07:06:11+00:00

This aligns with the default setting in Poky. Signed-off-by: Ting Liu

u-boot: replace base_contains with python codes

2015-01-14T02:51:54+00:00

Signed-off-by: Ting Liu

qe-ucode: install if QE_UCODE defined

2015-01-13T09:44:54+00:00

* QE_UCODE definition is moved to .conf * add check if QE_UCODE defined in anonymous python function * install the binary into /boot Signed-off-by: Ting Liu

cs4315-firmware: remove recipe

2015-01-12T08:34:33+00:00

The source code of cs4315-firmware is not available in public git repo due to license issue, remove the recipe. Build error log: ERROR: Function failed: Fetcher failure for URL: 'git://git.freescale.com/ppc/sdk/firmware.git;nobranch=1'. Unable to fetch URL from any source. Signed-off-by: Zhenhua Luo

qe-ucode: update to revision 49efc94

2015-01-08T10:18:39+00:00

This includes following fixes: 49efc94 Add QE ucode binary for T1024 and LS1021a Signed-off-by: Ting Liu

ipc: update to revision c9c92ac

2015-01-07T02:19:03+00:00

This includes following fixes: c9c92ac B4:L1 Defense: Add support for hardware watchpoint c4dd0bc b4860: IPC: Make dynamic user space library position independent Signed-off-by: Zhenhua Luo

linux/meta-freescale.git/meta-fsl-ppc/recipes-bsp, branch temp