u-boot-fslc: Upgrade to 2017.07-based release

2017-07-13T17:13:33+00:00

This release provides a huge improvement regarding the support for SPL to more boards. We now uses this and migrated following boards: - imx6qpsabresd -> imx6qdlsabresd - imx6qsabresd -> imx6qdlsabresd - imx6dlsabresd -> imx6qdlsabresd - imx6solosabresd -> imx6qdlsabresd - imx6qpsabreauto -> imx6qdlsabreauto - imx6qsabreauto -> imx6qdlsabreauto - imx6dlsabreauto -> imx6qdlsabreauto - imx6solosabreauto -> imx6qdlsabreauto So now, the 8 boards are covered by 2 machine files. This drastically reduces the build time and allow for a better user experience as we can use the same image to test different boards. In summary an image built for imx6qdlsabresd or imx6qdlsabreauto is capable of run on a its respective board which contains a i.MX6 QuadPlus, Quad, Dual, DualLite or Solo SoC removing the need of a specific image for each SoC type. On top of the official 2017.07 release, following patches are included: 801fd44563 mx6sabreauto: Make Ethernet functional again 8ccb1970b8 wandboard: Set fdt based on board_rev and board_name e6605743e5 mx6sabresd: Enable video interfaces in bootargs e50a2475d4 mx6sabresd: Use LDO dtb file until LDO bypass support is added b1a4715311 mx6slevk: Use LDO dtb file until LDO bypass support is added 957409876b imx: cx9020: try pxe boot, if no vmlinuz on mmc 3608315bf1 imx: cx9020: use fdt_addr_r and ramdisk_addr_r 9a1c960516 mx6sabreauto: Add Falcon mode support 3a279e5fe8 warp: Use PARTUUID to specify the rootfs location 0f9a6703e7 embestmx6boards: Use PARTUUID to specify the rootfs location c877510614 mx6cuboxi: Use PARTUUID to specify the rootfs location 0ada2d6caf wandboard: Use PARTUUID to specify the rootfs location eee442362c mx6sabre: Use PARTUUID to specify the rootfs location 80a56615fa mx6sabreauto: Do not enable WEIM by default 321339efd7 imx: reorganize IMX code as other SOCs 1567ce3edc mmc: fsl_esdhc: drop CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT 40294f880d dm: mmc: fsl_esdhc: handle vqmmc supply 0378edcd02 mmc: fsl_esdhc: introduce vs18_enable for 1.8V fix I/O 3657cae890 mmc: fsl_esdhc: correct type of wp_enable 45103e1030 imx6_spl: Add u-boot-dtb.img for SPL payload 61131fa4b5 mx6sabreauto: Update to SPL only mode 07a667be9b mx6qsabreauto: Add SPL support 4506c859ee mx6cuboxi: Add support for sata a5c5962327 mx7dsabresd: Set VLD04 output to 2.8V in PMIC initialization. 4590f11b61 mx6: soc: Move mxs_dma_init() into the mxs nand driver 10d185960e net: fec_mxc: fix PHY initialization bug with CONFIG_DM_ETH b2d4bf303e icorem6_rqs: Rename icorem6_rqs config file af34708e1e dt-bindings: Document the Broadcom STB wake-up timer node 3e92667cfe serial: mxc: Add debug uart support 4e2b31a5c5 serial: mxc: Code cleanup 27835dae1a serial: mxc: Move common baud gen into _mxc_serial_setbrg 1ca9fe11fd serial: mxc: Move common init into _mxc_serial_init 14ac9d06be serial: mxc: Move cr1 and cr2 write to mxc_serial_setbrg fdd1f0debc serial: mxc: Use RFDIV in dm-code fd008b0569 serial: mxc: Add common mxc_uart reg space 2fd7878124 imx: mx6ull: fix USB bmode for i.MX 6UL and 6ULL 5c72de6152 ot1200: enable CONFIG_IMX_THERMAL for detailed thermal information 8e38f54c56 mx6sabresd: Fix guard file symbol 3320a872b0 wandboard: Remove unnecessary delay d5ae3ce6dd cm_fx6: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS 1325b822da cgtqmx6eval: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS 844365a5a0 mx6slevk_spl: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS ff9e6d62ed mx6sabresd: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS Signed-off-by: Otavio Salvador Acked-by: Daiane Angolini Signed-off-by: Otavio Salvador

Update machine description fields

2017-01-23T18:55:31+00:00

Change description fields from Freescale to NXP in machine files to align to 2016 corporate transfer to NXP. Signed-off-by: Alexandra Safta Signed-off-by: Lauren Post Signed-off-by: Otavio Salvador

Convert SOC_FAMILY to MACHINEOVERRIDES

2016-09-08T14:24:24+00:00

The SOC_FAMILY is an indirection which makes the understanding, from OpenEmbedded versed developers and users, more difficult. Instead of using the SOC_FAMILY indirection which is rarely used, we now move to the MACHINEOVERRIDES mechanism as this is in fact what is in use. Change-Id: Ic6e58b79bdc990ac853c87761c3fff635786e4e5 Signed-off-by: Otavio Salvador

imx6qsabred: Add Murata BT/WiFi module support

2016-04-19T18:03:25+00:00

Add Murata Type ZP (BCM4339) module support on below platforms: - i.MX6Q/DL/QP SabreSD(SD2 slot) + Murata adapter V2.0 Note: MX6Q/DL/QP SabreSD board requires HW rework. Please refer to rework guide specified in schematic. Signed-off-by: Lauren Post Signed-off-by: Otavio Salvador

imx6qsabresd: Remove imx6q-sabresd-uart device tree

2016-04-19T18:03:25+00:00

Signed-off-by: Lauren Post Signed-off-by: Otavio Salvador

Move meta-fsl-arm content to layer root

2015-07-16T18:01:29+00:00