summaryrefslogtreecommitdiffstats
path: root/meta-fsl-extras
Commit message (Collapse)AuthorAgeFilesLines
* apalis-imx6: lower default resolution on HDMI to 720pSamuli Piippo2017-10-302-0/+23
| | | | | | | | | imx6 does not have enough power to run qtlauncher smootly in fullHD resolution. Change-Id: I8c66e676ce65cb5b50e8894e28e0d574d18ca90f Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io> Reviewed-by: Kari Hormi <kari.hormi@qt.io>
* apalis-imx6: modify u-boot to provide support for ixora v1.0Samuli Piippo2017-10-122-1/+39
| | | | | | | | | Allow user to change drive slot where u-boot should use for booting. Ixora v1.1 and v1.0 are using different slots. Task-number: QTBUG-63458 Change-Id: I490438cb6d56910d84d9a392bb84a33f574375ce Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
* apalis-imx6: add support for the new capasitive touch displaySamuli Piippo2017-10-123-25/+72
| | | | | | | | | | | | | The atmel_mxt_ts controller needs to be enabled in the dtb, done here for the ixora v1.1 dtb. Said dtb is also changed to be the default dtb in the u-boot config. Existing u-boot patch is updated to include console=tty1 removal for all toradex boards. Task-number: QTBUG-63344 Change-Id: Idaba988c2a0a5916c8fe6b6f11cc75981a9a28e2 Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
* apalis-imx6: enable Fusion10 touch displaySamuli Piippo2017-05-222-0/+35
| | | | | | | | | | Autoload required kernel module, and setup uboot to enable it if found during boot. Task-number: QTBUG-54817 Change-Id: Ie57c4212ba0bc927df7a51513d75afa2e9596715 Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io> Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
* toradex: use latest toradex meta layersSamuli Piippo2017-05-1717-1722/+132
| | | | | | | | | | | Use meta-toradex-bsp-common and meta-toradex-nxp instead of only meta-freescale-3rdparty. This provides latest kernel and uboot versions. Update the u-boot updates scripts to the v2.7 used by toradex images. Task-number: QTBUG-60802 Task-number: QTBUG-60055 Change-Id: I34f2637f6bc46c15d558eeafefc8a57e066bd2b9 Reviewed-by: Mikko Gronoff <mikko.gronoff@qt.io>
* Merge remote-tracking branch 'origin/dev' into mortyMikko Gronoff2017-05-052-0/+1365
|\ | | | | | | | | | | | | | | | | | | * origin/dev: Fix USB drivers on Apalis board Add support for Renesas R-Car Gen3 boards tegra: update to [4.1.4.0] Vibrante 4.1 Linux Drive CX2 Change-Id: I73542c81d5d2f3741fe90b94133aa5a5f55bb875
| * Fix USB drivers on Apalis boardSami Nurmenniemi2017-05-052-0/+1365
| | | | | | | | | | | | | | | | | | | | | | | | Apalis kernel was missing one patch that fixes crc calculation of exported symbols. That caused some exported symbols to have checksum 0x00000000 in Module.symvers and modules using those symbols refused to load. Task-number: QTBUG-60569 Change-Id: I798fc0af0138b0dffbff2850295f40f74e70a2c8 Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io> Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
* | Use qdbd instead of adbd by defaultKari Oikarinen2017-05-034-4/+4
|/ | | | | | | | | | | Start qdbd by default instead of adbd. Changing to adbd can be done with `systemctl enable --now adbd`. qdbd needs Function FS, so update the comments related to those kernel config changes. Change-Id: I990a25f26141afe751555f5dc49f0304949dd9a6 Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
* fsl: update freescale meta layers & related .bbappend entriesMikko Gronoff2017-04-2410-81/+25
| | | | | | | | | | | | * Update meta-freescale & meta-freescale-3rdparty layers to the latest SHA1s in morty branches * Update related meta-boot2qt/meta-fsl-extras .bbappend entries by removing duplicate/obsolete entries * Update CMA-reserved-size patch for nitrogen6x * Remove Add-recovery-support patch Change-Id: Ifa1063d7b8bb4f76eea0c9c735f483136d2cd8bb Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
* warp7: add kernel configs to right fileSamuli Piippo2017-04-221-3/+3
| | | | | Change-Id: I7549d1853cca7c563e072d05fa0526bdd0cd3bac Reviewed-by: Mikko Gronoff <mikko.gronoff@qt.io>
* Add support for i.MX7S WaRPMikko Gronoff2017-04-211-0/+34
| | | | | | Change-Id: Ib2c82ccf8d7648bb303e0fc949e3c1aef5b09195 Reviewed-by: Mikko Gronoff <mikko.gronoff@qt.io> Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
* Merge remote-tracking branch 'origin/krogoth' into devMikko Gronoff2017-04-131-0/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * origin/krogoth: neptune-ui: update revision neptune-ui: depends on qttools-native Multiscreen-demo: update revision neptune-ui: rdepends on dbus-session multiscreen-demo: update revision qtivi: Update to the latest version neptune-ui: Update to the latest version neptune: update to latest version toradex: add missing USB kernel config for colibri vf Change-Id: Ic0ae906b9acef6a09c80ee50ea7b56d558636739
| * toradex: add missing USB kernel config for colibri vfSamuli Piippo2017-03-201-0/+3
| | | | | | | | | | | | | | | | These are needed to enable USB in colibri vf modules Task-number: QTBUG-57728 Change-Id: I29b72a62b48a61170b5d251ccd9bb9261f269f17 Reviewed-by: Karim Pinter <karim.pinter@qt.io>
* | u-boot-script-toradex: fix uboot image deploymentMikko Gronoff2017-03-151-1/+1
|/ | | | | | | | | | | | do_mkimage() method outputs resulting images to current directory. In poky 2.1 -> 2.2 the behavior differs a bit so that before running do_mkimage() the directory is not changed to WORKDIR, thus creating images to build dir root. Following do_deploy() tries to look for the images in wrong place. Add full path to do_mkimage() output so that do_deploy() executes correctly. Change-Id: I81659d83a519c765538536ad8c38586aa6c6c5ce Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
* patch kernel configs in correct phaseSamuli Piippo2016-11-032-2/+2
| | | | | | Change-Id: Id9854cebb7a82c310fff281dea97a6aac0d746f7 Reviewed-by: Mikko Gronoff <mikko.gronoff@qt.io> Reviewed-by: Rainer Keller <Rainer.Keller@qt.io>
* Merge remote-tracking branch 'origin/jethro' into devSamuli Piippo2016-10-311-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * origin/jethro: VKB: correctly override PACKAGECONFIG psplash: remove from image imx6: enable QT_QPA_EGLFS_FORCEVSYNC for all imx6 devices colibri-vf: use older 4.1 version of kernel to fix color issue colibri-imx7: add u-boot-nand.imx to image colibri-vf: add kernel image to rootfs dbus-session-init: fix broken init script Improve repo fetching qt5 recipes cleanup qt5: update submodules qt5: remove obsolete file 0001-Allow-a-tools-only-build.patch Conflicts: meta-raspberrypi-extras/recipes/bluez5/bluez5_%.bbappend recipes-qt/qt5/nativesdk-qtbase_git.bbappend recipes-qt/qt5/qt3d_git.bbappend recipes-qt/qt5/qtbase-native_git.bbappend recipes-qt/qt5/qtbase_git.bbappend recipes-qt/qt5/qtcanvas3d_git.bbappend recipes-qt/qt5/qtcharts_git.bbappend recipes-qt/qt5/qtconnectivity_git.bbappend recipes-qt/qt5/qtdeclarative_git.bbappend recipes-qt/qt5/qtgraphicaleffects_git.bbappend recipes-qt/qt5/qtimageformats_git.bbappend recipes-qt/qt5/qtlocation_git.bbappend recipes-qt/qt5/qtmultimedia_git.bbappend recipes-qt/qt5/qtquickcontrols2_git.bbappend recipes-qt/qt5/qtquickcontrols_git.bbappend recipes-qt/qt5/qtsensors_git.bbappend recipes-qt/qt5/qtserialbus_git.bbappend recipes-qt/qt5/qtserialport_git.bbappend recipes-qt/qt5/qtsvg_git.bbappend recipes-qt/qt5/qttools_git.bbappend recipes-qt/qt5/qttranslations_git.bbappend recipes-qt/qt5/qtvirtualkeyboard_git.bbappend recipes-qt/qt5/qtwayland_git.bbappend recipes-qt/qt5/qtwebchannel_git.bbappend recipes-qt/qt5/qtwebengine_git.bbappend recipes-qt/qt5/qtwebsockets_git.bbappend recipes-qt/qt5/qtxmlpatterns_git.bbappend scripts/manifest.xml Change-Id: I089e7d3667ac4ed150cc5c2201c2505103f548ee
* | Merge remote-tracking branch 'origin/jethro' into mergeSamuli Piippo2016-09-2226-144/+611
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * origin/jethro: Rename last references to b2qt-utils Rename b2qt-utils to qtdeviceutilities toradex: apply u-boot and flashing script changes to colibri-imx7 nitrogen6x: add Nitrogen6QP_MAX and SOMv2 support qt5: update submodules toradex: use latest u-boot and flashing scripts kontron: update to SMARC-sAMX6i BSP release v2.0, RC2 Use code.qt.io with git protocol instead of codereview Use new repo url for utils and appcontroller kontron: patch kernel to support newer vivante drivers Fetch only external repos for repo mirror qt5: update submodules Add rsync to image Fix raspberry3 build error in perl deployment rcar-gen2: USB fixups ostree: Added dependency for systemd qtquickcompiler: update revision qtquickcompiler: update revision Fix typo in RPi overlay config Update meta layers Conflicts: conf/distro/include/toradex.inc meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/mx6/flash_blk.scr meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/mx6/flash_mmc.scr meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/vf/flash_blk.scr meta-fsl-extras/recipes/u-boot/u-boot-script-toradex/vf/flash_mmc.scr meta-fsl-extras/recipes/u-boot/u-boot-toradex/0001-Update-default-args-for-apalis-imx6.patch meta-fsl-extras/recipes/u-boot/u-boot-toradex_2015.04.bbappend recipes/ostree/ostree.bb recipes/samba/samba_4.1.12.bbappend scripts/manifest_jethro.xml Change-Id: I6b6ec105394f03fb57d8f922e358fef51de1e848
* | toradex: stop using meta-toradexSamuli Piippo2016-09-1214-0/+318
| | | | | | | | | | | | | | All needed toradex recipes are now in meta-fsl-arm-extra Change-Id: I3eedacd83845087d2369cf4d4b6df2a030d6d283 Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>
* | sabre: update to new u-boot versionSamuli Piippo2016-09-121-0/+0
| | | | | | | | | | Change-Id: Idebc04184f1667e91faaca9b2b4defdc324158fe Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>
* | fsl: update to new kernel versionsSamuli Piippo2016-09-122-2/+2
| | | | | | | | | | Change-Id: I728276758ac94d852f1c22c1af432bf44bb8e36e Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>
* | nitrogen6x: update to new kernel versionSamuli Piippo2016-09-121-1/+1
|/ | | | | Change-Id: I2b58e480246a84f855d382f3958f9ae8538dfd5d Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>
* nitrogen: enable HID_MULTITOUCH kernel moduleSamuli Piippo2016-08-251-0/+4
| | | | | | | | Used with GeChic multitouch monitors Change-Id: If6652a32f0cf7cacc0e23c26cc1fdac7aa67ef54 Task-number: QTAUTO-230 Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>
* Add bbappend for linux-fslc-imx kernelsLouai Al-Khanji2016-06-011-0/+46
| | | | | Change-Id: I893e03dd3fb15bfac2e16e3f11c5b8370d5f87b5 Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
* Update license headersSamuli Piippo2016-05-187-49/+105
| | | | | | | License changed to GPLv3 + Commercial Change-Id: I267c97216e717ed29071df064337e1bcf83de973 Reviewed-by: Kalle Viironen <kalle.viironen@theqtcompany.com>
* Add recovery support to u-bootRainer Keller2016-05-092-0/+38
| | | | | Change-Id: I9abe77d04569171cbcadf82e437e23de14322551 Reviewed-by: Gatis Paeglis <gatis.paeglis@theqtcompany.com>
* imx53: remove support for imx53Samuli Piippo2016-04-082-51/+0
| | | | | | | | | OE has moved to gcc 5.2 which cannot be used to build the old kernel that imx53 still uses, therefore all support for it was dropped from meta-fsl-arm. Change-Id: Ic57310f8ae6d06f62274a7c1874df0d01c95b5e9 Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>
* sabre: Use hdmi as primary display only if connectedSamuli Piippo2016-02-182-0/+38
| | | | | | | | | Test if HDMI display is connected before setting it as primary display. Otherwise set lvds as primary display. Test can be overridden by setting video_interfaces env. Change-Id: If52b3cd57fc2645296ae8595ce02ae608359f24a Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>
* sabre: enable CONFIG_FHANDLESamuli Piippo2016-02-181-0/+1
| | | | | | | | CONFIG_FHANDLE is required for systemd to start getty on a serial device (ttymxc0). Change-Id: I16ac356631f5315e814dd32f4d5492e1f944aa5d Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>
* u-boot-boundary: Add support for KOE tx31d200vm0baa displaySamuli Piippo2016-02-122-0/+115
| | | | | Change-Id: I765336429009433cd361dd1bacae9c743ed58fd5 Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>
* Update license headersSamuli Piippo2016-02-097-84/+99
| | | | | Change-Id: Iabcf736e6f4ae2149b57c84ebdc8b5b1be82023d Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>
* nitrogen6x: add support for koe tx31d200vm0baa displaySamuli Piippo2016-02-012-0/+47
| | | | | | | The wide display used in the automotive cluster demo Change-Id: I6d3b41500fb9a32c99b5777a09b41a0068686732 Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>
* nitrogen6x: update u-boot scriptSamuli Piippo2016-01-134-28/+58
| | | | | | | | | Set screen resolution for touch controller (ft5x06) so that touch events are processed correctly on Qt. Apply CMA argument to the correct u-boot script Change-Id: I128f32b64c9bdc987c158a1e193d56cd8001106e Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>
* imx6: update to latest revision of meta-fsl-arm/-extraSamuli Piippo2015-12-302-50/+24
| | | | | | | | This updates kernel version for boundary devices, but fixes video playback problems. Change-Id: If76b9c6ee4346d2d818ae933385d07fcc88ff5c3 Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>
* sabre: enable CONFIG_NAMESPACESSamuli Piippo2015-12-071-0/+2
| | | | | | | Needed by systemd hostnamed service Change-Id: I6b5a02918d989390e099ca63dad2eff3690995a2 Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com>
* Merge remote-tracking branch 'origin/dizzy' into devSamuli Piippo2015-12-072-85/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * origin/dizzy: Use openembedded mirror from github nitrogen6x: add u-boot binary back to the image ostree: Add TLS support ostree: patch upstream project ostree: Add GNUPG to runtime dependencies. Revert "Build nativesdk-ostree" Remove unused b2qt-update-framework Conflicts: conf/distro/include/nitrogen6x.conf recipes/ostree/ostree.bb scripts/manifest.xml scripts/manifest_fido.xml Change-Id: Ie3884fa026fc8b8d7d05a9bff4b2beb124e4fd03
| * Remove unused b2qt-update-frameworkRainer Keller2015-11-132-85/+0
| | | | | | | | | | | | | | This reverts commit f309d05bccefc29977d474df734fecbe311f8f7b. Change-Id: Ia25e629247c6863d2ce48e1b8a80029d13248ded Reviewed-by: Gatis Paeglis <gatis.paeglis@theqtcompany.com>
* | Merge remote-tracking branch 'origin/dizzy' into devSamuli Piippo2015-09-152-0/+3
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | openssl/c_rehash patch updated to apply again. * origin/dizzy: Fix c_rehash run during image creation Include CDC-ACM kernel module Use mirror from github to clone git-repo tool Add libevent to toolchain and image Use correct path for mkspecs qt5: remove separate designer packages qt5: use 5.5-next branch for meta-qt5 qt5: patch qdevice.conf from correct location Change-Id: I6998da6dc050c17aa1cbf20d50bcf0d14fc4ee8e
| * Include CDC-ACM kernel moduleSamuli Piippo2015-09-102-0/+3
| | | | | | | | | | | | | | Task-number: QTEE-972 Change-Id: I9fc3e211c2cc4739d7fad210737b7a0cf860d8ce Reviewed-by: Teemu Holappa <teemu.holappa@theqtcompany.com> Reviewed-by: Karim Pinter <karim.pinter@theqtcompany.com>
* | u-boot-fslc: upstream version has been updatedSamuli Piippo2015-08-192-50/+8
| | | | | | | | | | | | | | | | New u-boot version has better handling for video args, so our patch got simpler. Change-Id: I90958167d1ff10bca46123915491a5136dfa5fc9 Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
* | imx: upstream kernel versions have been updatedSamuli Piippo2015-08-192-6/+0
| | | | | | | | | | | | | | | | linux-imx is now new enough, so it doesn't require perf patches. DL version of nitrogen6_max is not supported. Change-Id: Ic5d6fce0f1ed904aed3795d4f82abc5f71b16b30 Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
* | gpu-viv-bin-mx6q: remove upstreamed changeSamuli Piippo2015-08-191-1/+0
|/ | | | | Change-Id: Ie782495f23bd71320edcf35128801d176c71ad5b Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
* Change all tab characters to spacesSamuli Piippo2015-08-112-18/+18
| | | | | | | Gerrit Sanity Bot does not like tabs, so remove them from recipes. Change-Id: Ic0bede29c9a4a01a2bd816e6771fafd76b2323e2 Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
* boundary: include uvcvideo kernel moduleSamuli Piippo2015-08-111-0/+4
| | | | | | | | Add support for webcams for Boundary Devices imx6 Change-Id: I8ea1b056c5eab7120c4269a98710de322fb304e0 Reviewed-by: Karim Pinter <karim.pinter@theqtcompany.com> Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
* Increase CMA reserved size on nitrogen6x.Yoann Lopes2015-06-192-5/+7
| | | | | | | | | | | Increased from 256MB (the default) to 384MB. Without this, HW-accelerated video decoding cannot work for high resolution videos. The same might have to be done on other iMX devices. Change-Id: I202ee246d59ded0343a93b6bdf221bd69fcd22c5 Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
* Toolchain: add static device mkspec, suitable for Qt CreatorEirik Aavitsland2015-05-281-38/+0
| | | | | | | | | | | | | | | | | | The linux-oe-g++ mkspec used by meta-qt5 depends on the user sourcing the toolchain environment-setup script, which modifies the PATH and sets a long range of environment variables. That is not a "best practice" way of use Qt, and does not allow smooth integration of the toolchain into Qt Creator. Here, we instead create a static mkspec for the toolchain: devices/linux-oe-generic-g++. The toolchain recipe will will the qdevice.pri file with the required compiler flags etc. for the target. Additionally, we introduce an extra .pri file for device-specific settings, so they can be shared between the two mkspecs. Change-Id: Ie5a019524ba6cdddffb71b0c7c28861ddba17fbd Reviewed-by: Samuli Piippo <samuli.piippo@theqtcompany.com>
* Build Qt5 and all addonsSamuli Piippo2015-05-121-0/+38
| | | | | | | | | | Use meta-qt5 layer to build Qt5, commercial addons and b2qt addons. Create new image and toolchain recipes with Qt5 content, so that the existing image and toolchain remain as-is without Qt5. Currently support only for imx6 targets. Change-Id: I398750dd1a62c6ff8ea216cfe364da273d8e9a77 Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
* sabre: follow upstream kernel revisionSamuli Piippo2015-04-011-4/+0
| | | | | Change-Id: I5e3852df441196315c9f8ab209ffe21ca490c0ee Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
* Performance analysis tools for LinuxSamuli Piippo2015-02-262-0/+12
| | | | | | | | | | | | | | | Build perf with DWARF unwinding support. Kernels older then 3.14 need to be patched to add ARM support. Kernels for tibidabo (3.0) and imx53 (2.6) are too old and would require more patches to be backported, so they are left without unwinding support. RPi needed extra layer to modify the kernel recipe, and linux-imx recipe was renamed so that it doesn't conflict with older tibidabo kernel recipe. Change-Id: Ic8331f8feeace67b32a5ce99ffd3fda517d595d1 Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com> Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
* sabre: update u-boot patchSamuli Piippo2015-02-191-76/+11
| | | | | | | Upstream was changed and already includes the I2C initialization. Change-Id: I3e57a248a49924eff086eea7694ccd5fa424f905 Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
* nitrogen6x: update kernel revisionSamuli Piippo2015-01-291-0/+4
| | | | | | | | Latest kernel from dizzy branch, will be part of daisy at some point. Fixes support for the Nit6X_800x480 display. Change-Id: I1a886998b3e3f12750bfc93f2d06f33047aa850f Reviewed-by: Eirik Aavitsland <eirik.aavitsland@theqtcompany.com>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2025-01-19 14:21:09 +0000