path: root/meta/packages/uboot/u-boot-mkimage-openmoko-native/uboot-s3c2410_udc.patch

USB Device Controller Driver for Samsung S3C2410 SoC

Index: u-boot/drivers/Makefile
===================================================================
--- u-boot.orig/drivers/Makefile
+++ u-boot/drivers/Makefile
@@ -47,7 +47,7 @@
 	  status_led.o sym53c8xx.o systemace.o ahci.o \
 	  ti_pci1410a.o tigon3.o tsec.o \
 	  tsi108_eth.o tsi108_i2c.o tsi108_pci.o \
-	  usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
+	  usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbdcore_s3c2410.o usbtty.o \
 	  videomodes.o w83c553f.o \
 	  ks8695eth.o \
 	  pcf50606.o \
Index: u-boot/drivers/usbdcore_s3c2410.c
===================================================================
--- /dev/null
+++ u-boot/drivers/usbdcore_s3c2410.c
@@ -0,0 +1,730 @@
+/* S3C2410 USB Device Controller Driver for u-boot
+ *
+ * (C) Copyright 2007 by OpenMoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ *
+ * based on Linux' s3c2410_udc.c, which is
+ * Copyright (C) 2004-2006 Herbert Pötzl - Arnaud Patard
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307	 USA
+ *
+ */
+
+#include <config.h>
+
+#if defined(CONFIG_S3C2410) && defined(CONFIG_USB_DEVICE)
+
+#include <common.h>
+
+/* we can't use the regular debug macros since the console might be
+ * set to usbtty, which would cause deadlocks! */
+#ifdef	DEBUG
+#undef debug
+#undef debugX
+#define debug(fmt,args...)	serial_printf (fmt ,##args)
+#define debugX(level,fmt,args...) if (DEBUG>=level) serial_printf(fmt,##args)
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#include <asm/io.h>
+#include <s3c2410.h>
+
+#include "usbdcore.h"
+#include "usbdcore_s3c2410.h"
+#include "usbdcore_ep0.h"
+#include <usb_cdc_acm.h>
+
+enum ep0_state {
+        EP0_IDLE,
+        EP0_IN_DATA_PHASE,
+        EP0_OUT_DATA_PHASE,
+        EP0_END_XFER,
+        EP0_STALL,
+};
+
+static struct urb *ep0_urb = NULL;
+
+static struct usb_device_instance *udc_device;	/* Used in interrupt handler */
+
+static inline int fifo_count_out(void)
+{
+	int tmp;
+
+	tmp = inl(S3C2410_UDC_OUT_FIFO_CNT2_REG) << 8;
+	tmp |= inl(S3C2410_UDC_OUT_FIFO_CNT1_REG);
+
+	return tmp & 0xffff;
+}
+
+static const unsigned long ep_fifo_reg[S3C2410_UDC_NUM_ENDPOINTS] = {
+	S3C2410_UDC_EP0_FIFO_REG,
+	S3C2410_UDC_EP1_FIFO_REG,
+	S3C2410_UDC_EP2_FIFO_REG,
+	S3C2410_UDC_EP3_FIFO_REG,
+	S3C2410_UDC_EP4_FIFO_REG,
+};
+
+static int s3c2410_write_noniso_tx_fifo(struct usb_endpoint_instance *endpoint)
+{
+	struct urb *urb = endpoint->tx_urb;
+	unsigned int last, i;
+	unsigned int ep = endpoint->endpoint_address & 0x7f;
+	unsigned long fifo_reg = ep_fifo_reg[ep];
+
+	/* WARNING: don't ever put serial debug printf's in non-error codepaths
+	 * here, it is called from the time critical EP0 codepath ! */
+
+	if (!urb || ep >= S3C2410_UDC_NUM_ENDPOINTS) {
+		serial_printf("no urb or wrong endpoint\n");
+		return -1;
+	}
+
+	S3C2410_UDC_SETIX(ep);
+	if ((last = MIN(urb->actual_length - endpoint->sent,
+		        endpoint->tx_packetSize))) {
+		u8 *cp = urb->buffer + endpoint->sent;
+
+		for (i = 0; i < last; i++)
+			outb(*(cp+i), fifo_reg);
+	}
+	endpoint->last = last;
+
+	if (endpoint->sent + last < urb->actual_length) {
+		/* not all data has been transmitted so far */
+		return 0;
+	}
+
+	if (last == endpoint->tx_packetSize) {
+		/* we need to send one more packet (ZLP) */
+		return 0;
+	}
+
+	return 1;
+}
+
+
+static void s3c2410_deconfigure_device (void)
+{
+	/* FIXME: Implement this */
+}
+
+static void s3c2410_configure_device (struct usb_device_instance *device)
+{
+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	S3C24X0_CLOCK_POWER * const cpower = S3C24X0_GetBase_CLOCK_POWER();
+
+	/* disable EP0-4 SUBD interrupts ? */
+	outl(0x00, S3C2410_UDC_USB_INT_EN_REG);
+
+	/* UPLL already configured by board-level init code */
+
+	/* configure USB pads to device mode */
+	gpio->MISCCR &= ~(S3C2410_MISCCR_USBHOST|S3C2410_MISCCR_USBSUSPND1);
+
+	/* don't disable USB clock */
+	cpower->CLKSLOW &= ~S3C2410_CLKSLOW_UCLK_OFF;
+
+	/* clear interrupt registers */
+	inl(S3C2410_UDC_EP_INT_REG);
+	inl(S3C2410_UDC_USB_INT_REG);
+	outl(0xff, S3C2410_UDC_EP_INT_REG);
+	outl(0xff, S3C2410_UDC_USB_INT_REG);
+
+	/* enable USB interrupts for RESET and SUSPEND/RESUME */
+	outl(S3C2410_UDC_USBINT_RESET|S3C2410_UDC_USBINT_SUSPEND,
+	     S3C2410_UDC_USB_INT_EN_REG);
+}
+
+static void udc_set_address(unsigned char address)
+{
+	address |= 0x80; /* ADDR_UPDATE bit */
+	outl(address, S3C2410_UDC_FUNC_ADDR_REG);
+}
+
+extern struct usb_device_descriptor device_descriptor;
+
+static void s3c2410_udc_ep0(void)
+{
+	u_int8_t ep0csr;
+	struct usb_endpoint_instance *ep0 = udc_device->bus->endpoint_array;
+
+	S3C2410_UDC_SETIX(0);
+	ep0csr = inl(S3C2410_UDC_IN_CSR1_REG);
+
+	/* clear stall status */
+	if (ep0csr & S3C2410_UDC_EP0_CSR_SENTSTL) {
+	    	serial_printf("Clearing SENT_STALL\n");
+		clear_ep0_sst();
+		if (ep0csr & S3C2410_UDC_EP0_CSR_SOPKTRDY)
+			clear_ep0_opr();
+		ep0->state = EP0_IDLE;
+		return;
+	}
+
+	/* clear setup end */
+	if (ep0csr & S3C2410_UDC_EP0_CSR_SE
+	    /* && ep0->state != EP0_IDLE */) {
+	    	serial_printf("Clearing SETUP_END\n");
+		clear_ep0_se();
+#if 1
+		if (ep0csr & S3C2410_UDC_EP0_CSR_SOPKTRDY) {
+			/* Flush FIFO */
+			while (inl(S3C2410_UDC_OUT_FIFO_CNT1_REG))
+				inl(S3C2410_UDC_EP0_FIFO_REG);
+			clear_ep0_opr();
+		}
+#endif
+		ep0->state = EP0_IDLE;
+		return;
+	}
+
+	/* Don't ever put [serial] debugging in non-error codepaths here, it
+	 * will violate the tight timing constraints of this USB Device
+	 * controller (and lead to bus enumeration failures) */
+
+	switch (ep0->state) {
+		int i, fifo_count;
+		unsigned char *datap;
+	case EP0_IDLE:
+		if (!(ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY))
+			break;
+
+		datap = (unsigned char *) &ep0_urb->device_request;
+		/* host->device packet has been received */
+
+		/* pull it out of the fifo */
+		fifo_count = fifo_count_out();
+		for (i = 0; i < fifo_count; i++) {
+			*datap = (unsigned char)inl(S3C2410_UDC_EP0_FIFO_REG);
+			datap++;
+		}
+		if (fifo_count != 8) {
+			debug("STRANGE FIFO COUNT: %u bytes\n", fifo_count);
+			set_ep0_ss();
+			return;
+		}
+
+		if (ep0_urb->device_request.wLength == 0) {
+			if (ep0_recv_setup(ep0_urb)) {
+				/* Not a setup packet, stall next EP0 transaction */
+				debug("can't parse setup packet1\n");
+				set_ep0_ss();
+				set_ep0_de_out();
+				ep0->state = EP0_IDLE;
+				return;
+			}
+			/* There are some requests with which we need to deal
+			 * manually here */
+			switch (ep0_urb->device_request.bRequest) {
+			case USB_REQ_SET_CONFIGURATION:
+				if (!ep0_urb->device_request.wValue)
+					usbd_device_event_irq(udc_device,
+							DEVICE_DE_CONFIGURED, 0);
+				else
+					usbd_device_event_irq(udc_device,
+							DEVICE_CONFIGURED, 0);
+				break;
+			case USB_REQ_SET_ADDRESS:
+				udc_set_address(udc_device->address);
+				usbd_device_event_irq(udc_device,
+						DEVICE_ADDRESS_ASSIGNED, 0);
+				break;
+			default:
+				break;
+			}
+			set_ep0_de_out();
+			ep0->state = EP0_IDLE;
+		} else {
+			if ((ep0_urb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK)
+			    == USB_REQ_HOST2DEVICE) {
+				clear_ep0_opr();
+				ep0->state = EP0_OUT_DATA_PHASE;
+				ep0_urb->buffer = ep0_urb->buffer_data;
+				ep0_urb->buffer_length = sizeof(ep0_urb->buffer_data);
+				ep0_urb->actual_length = 0;
+			} else {
+				ep0->state = EP0_IN_DATA_PHASE;
+
+				if (ep0_recv_setup(ep0_urb)) {
+					/* Not a setup packet, stall next EP0 transaction */
+					debug("can't parse setup packet2\n");
+					set_ep0_ss();
+					//set_ep0_de_out();
+					ep0->state = EP0_IDLE;
+					return;
+				}
+				clear_ep0_opr();
+				ep0->tx_urb = ep0_urb;
+				ep0->sent = ep0->last = 0;
+
+				if (s3c2410_write_noniso_tx_fifo(ep0)) {
+					ep0->state = EP0_IDLE;
+					set_ep0_de_in();
+				} else
+					set_ep0_ipr();
+			}
+		}
+		break;
+	case EP0_IN_DATA_PHASE:
+		if (!(ep0csr & S3C2410_UDC_EP0_CSR_IPKRDY)) {
+			ep0->sent += ep0->last;
+
+			if (s3c2410_write_noniso_tx_fifo(ep0)) {
+				ep0->state = EP0_IDLE;
+				set_ep0_de_in();
+			} else
+				set_ep0_ipr();
+		}
+		break;
+	case EP0_OUT_DATA_PHASE:
+		if (ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY) {
+			u32 urb_avail = ep0_urb->buffer_length - ep0_urb->actual_length;
+			u_int8_t *cp = ep0_urb->buffer + ep0_urb->actual_length;
+			int i, fifo_count;
+
+			fifo_count = fifo_count_out();
+			if (fifo_count < urb_avail)
+				urb_avail = fifo_count;
+
+			for (i = 0; i < urb_avail; i++)
+				*cp++ = inl(S3C2410_UDC_EP0_FIFO_REG);
+
+			ep0_urb->actual_length += urb_avail;
+
+			if (fifo_count < ep0->rcv_packetSize ||
+			    ep0_urb->actual_length >= ep0_urb->device_request.wLength) {
+				ep0->state = EP0_IDLE;
+				if (ep0_recv_setup(ep0_urb)) {
+					/* Not a setup packet, stall next EP0 transaction */
+					debug("can't parse setup packet3\n");
+					set_ep0_ss();
+					//set_ep0_de_out();
+					return;
+				}
+				set_ep0_de_out();
+			} else
+				clear_ep0_opr();
+		}
+		break;
+	case EP0_END_XFER:
+		ep0->state = EP0_IDLE;
+		break;
+	case EP0_STALL:
+		//set_ep0_ss;
+		ep0->state = EP0_IDLE;
+		break;
+	}
+}
+
+
+static void s3c2410_udc_epn(int ep)
+{
+	struct usb_endpoint_instance *endpoint;
+	struct urb *urb;
+	u32 ep_csr1;
+
+	if (ep >= S3C2410_UDC_NUM_ENDPOINTS)
+		return;
+
+	endpoint = &udc_device->bus->endpoint_array[ep];
+
+	S3C2410_UDC_SETIX(ep);
+
+	if (endpoint->endpoint_address & USB_DIR_IN) {
+		/* IN transfer (device to host) */
+		ep_csr1 = inl(S3C2410_UDC_IN_CSR1_REG);
+		debug("for ep=%u, CSR1=0x%x ", ep, ep_csr1);
+
+		urb = endpoint->tx_urb;
+		if (ep_csr1 & S3C2410_UDC_ICSR1_SENTSTL) {
+			/* Stall handshake */
+			debug("stall\n");
+			outl(0x00, S3C2410_UDC_IN_CSR1_REG);
+			return;
+		}
+		if (!(ep_csr1 & S3C2410_UDC_ICSR1_PKTRDY) && urb &&
+		      urb->actual_length) {
+
+			debug("completing previously send data ");
+			usbd_tx_complete(endpoint);
+
+			/* push pending data into FIFO */
+			if ((endpoint->last == endpoint->tx_packetSize) &&
+			    (urb->actual_length - endpoint->sent - endpoint->last == 0)) {
+				endpoint->sent += endpoint->last;
+				/* Write 0 bytes of data (ZLP) */
+				debug("ZLP ");
+				outl(ep_csr1|S3C2410_UDC_ICSR1_PKTRDY, S3C2410_UDC_IN_CSR1_REG);
+			} else {
+				/* write actual data to fifo */
+				debug("TX_DATA ");
+				s3c2410_write_noniso_tx_fifo(endpoint);
+				outl(ep_csr1|S3C2410_UDC_ICSR1_PKTRDY, S3C2410_UDC_IN_CSR1_REG);
+			}
+		}
+		debug("\n");
+	} else {
+		/* OUT transfer (host to device) */
+		ep_csr1 = inl(S3C2410_UDC_OUT_CSR1_REG);
+		debug("for ep=%u, CSR1=0x%x ", ep, ep_csr1);
+
+		urb = endpoint->rcv_urb;
+		if (ep_csr1 & S3C2410_UDC_OCSR1_SENTSTL) {
+			/* Stall handshake */
+			outl(0x00, S3C2410_UDC_IN_CSR1_REG);
+			return;
+		}
+		if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && urb) {
+			/* Read pending data from fifo */
+			u32 fifo_count = fifo_count_out();
+			int is_last = 0;
+			u32 i, urb_avail = urb->buffer_length - urb->actual_length;
+			u8 *cp = urb->buffer + urb->actual_length;
+
+			if (fifo_count < endpoint->rcv_packetSize)
+				is_last = 1;
+
+			debug("fifo_count=%u is_last=%, urb_avail=%u)\n",
+				fifo_count, is_last, urb_avail);
+
+			if (fifo_count < urb_avail)
+				urb_avail = fifo_count;
+
+			for (i = 0; i < urb_avail; i++)
+				*cp++ = inb(ep_fifo_reg[ep]);
+
+			if (is_last)
+				outl(ep_csr1 & ~S3C2410_UDC_OCSR1_PKTRDY,
+				     S3C2410_UDC_OUT_CSR1_REG);
+
+			usbd_rcv_complete(endpoint, urb_avail, 0);
+		}
+	}
+
+	urb = endpoint->rcv_urb;
+}
+
+/*
+-------------------------------------------------------------------------------
+*/
+
+/* this is just an empty wrapper for usbtty who assumes polling operation */
+void udc_irq(void)
+{
+}
+
+/* Handle general USB interrupts and dispatch according to type.
+ * This function implements TRM Figure 14-13.
+ */
+void s3c2410_udc_irq(void)
+{
+	struct usb_endpoint_instance *ep0 = udc_device->bus->endpoint_array;
+	u_int32_t save_idx = inl(S3C2410_UDC_INDEX_REG);
+
+	/* read interrupt sources */
+	u_int32_t usb_status = inl(S3C2410_UDC_USB_INT_REG);
+	u_int32_t usbd_status = inl(S3C2410_UDC_EP_INT_REG);
+
+	//debug("< IRQ usbs=0x%02x, usbds=0x%02x start >", usb_status, usbd_status);
+
+	/* clear interrupts */
+	outl(usb_status, S3C2410_UDC_USB_INT_REG);
+
+	if (usb_status & S3C2410_UDC_USBINT_RESET) {
+		//serial_putc('R');
+		debug("RESET pwr=0x%x\n", inl(S3C2410_UDC_PWR_REG));
+		udc_setup_ep(udc_device, 0, ep0);
+		outl(S3C2410_UDC_EP0_CSR_SSE|S3C2410_UDC_EP0_CSR_SOPKTRDY, S3C2410_UDC_EP0_CSR_REG);
+		ep0->state = EP0_IDLE;
+		usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
+	}
+
+	if (usb_status & S3C2410_UDC_USBINT_RESUME) {
+		debug("RESUME\n");
+		usbd_device_event_irq(udc_device, DEVICE_BUS_ACTIVITY, 0);
+	}
+
+	if (usb_status & S3C2410_UDC_USBINT_SUSPEND) {
+		debug("SUSPEND\n");
+		usbd_device_event_irq(udc_device, DEVICE_BUS_INACTIVE, 0);
+	}
+
+	/* Endpoint Interrupts */
+	if (usbd_status) {
+		int i;
+
+		if (usbd_status & S3C2410_UDC_INT_EP0) {
+			outl(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_REG);
+			s3c2410_udc_ep0();
+		}
+
+		for (i = 1; i < 5; i++) {
+			u_int32_t tmp = 1 << i;
+
+			if (usbd_status & tmp) {
+				/* FIXME: Handle EP X */
+				outl(tmp, S3C2410_UDC_EP_INT_REG);
+				s3c2410_udc_epn(i);
+			}
+		}
+	}
+	S3C2410_UDC_SETIX(save_idx);
+}
+
+/*
+-------------------------------------------------------------------------------
+*/
+
+
+/*
+ * Start of public functions.
+ */
+
+/* Called to start packet transmission. */
+void udc_endpoint_write (struct usb_endpoint_instance *endpoint)
+{
+	unsigned short epnum =
+		endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK;
+
+	debug("Entering for ep %x ", epnum);
+
+	if (endpoint->tx_urb) {
+		u32 ep_csr1;
+		debug("We have an URB, transmitting\n");
+
+		s3c2410_write_noniso_tx_fifo(endpoint);
+
+		S3C2410_UDC_SETIX(epnum);
+
+		ep_csr1 = inl(S3C2410_UDC_IN_CSR1_REG);
+		outl(ep_csr1|S3C2410_UDC_ICSR1_PKTRDY, S3C2410_UDC_IN_CSR1_REG);
+	} else
+		debug("\n");
+}
+
+/* Start to initialize h/w stuff */
+int udc_init (void)
+{
+	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+	S3C24X0_INTERRUPT * irq = S3C24X0_GetBase_INTERRUPT();
+
+	udc_device = NULL;
+
+	/* Set and check clock control.
+	 * We might ought to be using the clock control API to do
+	 * this instead of fiddling with the clock registers directly
+	 * here.
+	 */
+	clk_power->CLKCON |= (1 << 7);
+
+	/* Print banner with device revision */
+	printf("USB:   S3C2410 USB Deviced\n");
+
+	/*
+	 * At this point, device is ready for configuration...
+	 */
+	outl(0x00, S3C2410_UDC_EP_INT_EN_REG);
+	outl(0x00, S3C2410_UDC_USB_INT_EN_REG);
+
+	irq->INTMSK &= ~BIT_USBD;
+
+	return 0;
+}
+
+/*
+ * udc_setup_ep - setup endpoint
+ *
+ * Associate a physical endpoint with endpoint_instance
+ */
+int udc_setup_ep (struct usb_device_instance *device,
+		   unsigned int ep, struct usb_endpoint_instance *endpoint)
+{
+	int ep_addr = endpoint->endpoint_address;
+	int packet_size;
+	int attributes;
+	u_int32_t maxp;
+
+	S3C2410_UDC_SETIX(ep);
+
+	if (ep) {
+		if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
+			/* IN endpoint */
+			outl(S3C2410_UDC_ICSR1_FFLUSH|S3C2410_UDC_ICSR1_CLRDT,
+			     S3C2410_UDC_IN_CSR1_REG);
+			outl(S3C2410_UDC_ICSR2_MODEIN, S3C2410_UDC_IN_CSR2_REG);
+			packet_size = endpoint->tx_packetSize;
+			attributes = endpoint->tx_attributes;
+		} else {
+			/* OUT endpoint */
+			outl(S3C2410_UDC_ICSR1_CLRDT, S3C2410_UDC_IN_CSR1_REG);
+			outl(0, S3C2410_UDC_IN_CSR2_REG);
+			outl(S3C2410_UDC_OCSR1_FFLUSH|S3C2410_UDC_OCSR1_CLRDT,
+			     S3C2410_UDC_OUT_CSR1_REG);
+			outl(0, S3C2410_UDC_OUT_CSR2_REG);
+			packet_size = endpoint->rcv_packetSize;
+			attributes = endpoint->rcv_attributes;
+		}
+	} else
+		packet_size = endpoint->tx_packetSize;
+
+	switch (packet_size) {
+	case 8:
+		maxp = S3C2410_UDC_MAXP_8;
+		break;
+	case 16:
+		maxp = S3C2410_UDC_MAXP_16;
+		break;
+	case 32:
+		maxp = S3C2410_UDC_MAXP_32;
+		break;
+	case 64:
+		maxp = S3C2410_UDC_MAXP_64;
+		break;
+	default:
+		debug("invalid packet size %u\n", packet_size);
+		return -1;
+	}
+
+	debug("setting up endpoint %u addr %x packet_size %u maxp %u\n", ep,
+		endpoint->endpoint_address, packet_size, maxp);
+
+	/* Set maximum packet size */
+	writel(maxp, S3C2410_UDC_MAXP_REG);
+
+	return 0;
+}
+
+/* ************************************************************************** */
+
+/**
+ * udc_connected - is the USB cable connected
+ *
+ * Return non-zero if cable is connected.
+ */
+#if 0
+int udc_connected (void)
+{
+	return ((inw (UDC_DEVSTAT) & UDC_ATT) == UDC_ATT);
+}
+#endif
+
+/* Turn on the USB connection by enabling the pullup resistor */
+void udc_connect (void)
+{
+	debug("connect, enable Pullup\n");
+	S3C24X0_INTERRUPT * irq = S3C24X0_GetBase_INTERRUPT();
+
+	udc_ctrl(UDC_CTRL_PULLUP_ENABLE, 0);
+	udelay(10000);
+	udc_ctrl(UDC_CTRL_PULLUP_ENABLE, 1);
+
+	irq->INTMSK &= ~BIT_USBD;
+}
+
+/* Turn off the USB connection by disabling the pullup resistor */
+void udc_disconnect (void)
+{
+	debug("disconnect, disable Pullup\n");
+	S3C24X0_INTERRUPT * irq = S3C24X0_GetBase_INTERRUPT();
+
+	udc_ctrl(UDC_CTRL_PULLUP_ENABLE, 0);
+
+	/* Disable interrupt (we don't want to get interrupts while the kernel
+	 * is relocating itself */
+	irq->INTMSK |= BIT_USBD;
+}
+
+/* Switch on the UDC */
+void udc_enable (struct usb_device_instance *device)
+{
+	debug("enable device %p, status %d\n", device, device->status);
+
+	/* Save the device structure pointer */
+	udc_device = device;
+
+	/* Setup ep0 urb */
+	if (!ep0_urb)
+		ep0_urb = usbd_alloc_urb(udc_device,
+					 udc_device->bus->endpoint_array);
+	else
+		serial_printf("udc_enable: ep0_urb already allocated %p\n",
+			       ep0_urb);
+
+	s3c2410_configure_device(device);
+}
+
+/* Switch off the UDC */
+void udc_disable (void)
+{
+	debug("disable UDC\n");
+
+	s3c2410_deconfigure_device();
+
+	/* Free ep0 URB */
+	if (ep0_urb) {
+		/*usbd_dealloc_urb(ep0_urb); */
+		ep0_urb = NULL;
+	}
+
+	/* Reset device pointer.
+	 * We ought to do this here to balance the initialization of udc_device
+	 * in udc_enable, but some of our other exported functions get called
+	 * by the bus interface driver after udc_disable, so we have to hang on
+	 * to the device pointer to avoid a null pointer dereference. */
+	/* udc_device = NULL; */
+}
+
+/**
+ * udc_startup - allow udc code to do any additional startup
+ */
+void udc_startup_events (struct usb_device_instance *device)
+{
+	/* The DEVICE_INIT event puts the USB device in the state STATE_INIT. */
+	usbd_device_event_irq (device, DEVICE_INIT, 0);
+
+	/* The DEVICE_CREATE event puts the USB device in the state
+	 * STATE_ATTACHED.
+	 */
+	usbd_device_event_irq (device, DEVICE_CREATE, 0);
+
+	/* Some USB controller driver implementations signal
+	 * DEVICE_HUB_CONFIGURED and DEVICE_RESET events here.
+	 * DEVICE_HUB_CONFIGURED causes a transition to the state STATE_POWERED,
+	 * and DEVICE_RESET causes a transition to the state STATE_DEFAULT.
+	 * The OMAP USB client controller has the capability to detect when the
+	 * USB cable is connected to a powered USB bus via the ATT bit in the
+	 * DEVSTAT register, so we will defer the DEVICE_HUB_CONFIGURED and
+	 * DEVICE_RESET events until later.
+	 */
+
+	/* The GTA01 can detect usb device attachment, but we just assume being
+	 * attached for now (go to STATE_POWERED) */
+	usbd_device_event_irq (device, DEVICE_HUB_CONFIGURED, 0);
+
+	udc_enable (device);
+}
+
+void udc_set_nak(int epid)
+{
+	/* FIXME: implement this */
+}
+
+void udc_unset_nak(int epid)
+{
+	/* FIXME: implement this */
+}
+
+#endif /* CONFIG_S3C2410 && CONFIG_USB_DEVICE */
Index: u-boot/drivers/usbdcore_s3c2410.h
===================================================================
--- /dev/null
+++ u-boot/drivers/usbdcore_s3c2410.h
@@ -0,0 +1,273 @@
+/* linux/include/asm/arch-s3c2410/regs-udc.h
+ *
+ * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at>
+ *
+ * This include file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ *  Changelog:
+ *    01-08-2004	Initial creation
+ *    12-09-2004	Cleanup for submission
+ *    24-10-2004	Fixed S3C2410_UDC_MAXP_REG definition
+ *    10-03-2005	Changed S3C2410_VA to S3C24XX_VA
+ *    10-01-2007	Modify for u-boot
+ */
+
+#ifndef __ASM_ARCH_REGS_UDC_H
+#define __ASM_ARCH_REGS_UDC_H
+
+#define S3C2410_UDC_REG_BASE_PHYS	0x52000000
+#define S3C2410_UDC_NUM_ENDPOINTS	5
+
+#define S3C2410_USBDREG(x) (x + S3C2410_UDC_REG_BASE_PHYS)
+
+#define S3C2410_UDC_FUNC_ADDR_REG	S3C2410_USBDREG(0x0140)
+#define S3C2410_UDC_PWR_REG		S3C2410_USBDREG(0x0144)
+#define S3C2410_UDC_EP_INT_REG		S3C2410_USBDREG(0x0148)
+
+#define S3C2410_UDC_USB_INT_REG		S3C2410_USBDREG(0x0158)
+#define S3C2410_UDC_EP_INT_EN_REG	S3C2410_USBDREG(0x015c)
+
+#define S3C2410_UDC_USB_INT_EN_REG	S3C2410_USBDREG(0x016c)
+
+#define S3C2410_UDC_FRAME_NUM1_REG	S3C2410_USBDREG(0x0170)
+#define S3C2410_UDC_FRAME_NUM2_REG	S3C2410_USBDREG(0x0174)
+
+#define S3C2410_UDC_EP0_FIFO_REG	S3C2410_USBDREG(0x01c0)
+#define S3C2410_UDC_EP1_FIFO_REG	S3C2410_USBDREG(0x01c4)
+#define S3C2410_UDC_EP2_FIFO_REG	S3C2410_USBDREG(0x01c8)
+#define S3C2410_UDC_EP3_FIFO_REG	S3C2410_USBDREG(0x01cc)
+#define S3C2410_UDC_EP4_FIFO_REG	S3C2410_USBDREG(0x01d0)
+
+#define S3C2410_UDC_EP1_DMA_CON		S3C2410_USBDREG(0x0200)
+#define S3C2410_UDC_EP1_DMA_UNIT	S3C2410_USBDREG(0x0204)
+#define S3C2410_UDC_EP1_DMA_FIFO	S3C2410_USBDREG(0x0208)
+#define S3C2410_UDC_EP1_DMA_TTC_L	S3C2410_USBDREG(0x020c)
+#define S3C2410_UDC_EP1_DMA_TTC_M	S3C2410_USBDREG(0x0210)
+#define S3C2410_UDC_EP1_DMA_TTC_H	S3C2410_USBDREG(0x0214)
+
+#define S3C2410_UDC_EP2_DMA_CON		S3C2410_USBDREG(0x0218)
+#define S3C2410_UDC_EP2_DMA_UNIT	S3C2410_USBDREG(0x021c)
+#define S3C2410_UDC_EP2_DMA_FIFO	S3C2410_USBDREG(0x0220)
+#define S3C2410_UDC_EP2_DMA_TTC_L	S3C2410_USBDREG(0x0224)
+#define S3C2410_UDC_EP2_DMA_TTC_M	S3C2410_USBDREG(0x0228)
+#define S3C2410_UDC_EP2_DMA_TTC_H	S3C2410_USBDREG(0x022c)
+
+#define S3C2410_UDC_EP3_DMA_CON		S3C2410_USBDREG(0x0240)
+#define S3C2410_UDC_EP3_DMA_UNIT	S3C2410_USBDREG(0x0244)
+#define S3C2410_UDC_EP3_DMA_FIFO	S3C2410_USBDREG(0x0248)
+#define S3C2410_UDC_EP3_DMA_TTC_L	S3C2410_USBDREG(0x024c)
+#define S3C2410_UDC_EP3_DMA_TTC_M	S3C2410_USBDREG(0x0250)
+#define S3C2410_UDC_EP3_DMA_TTC_H	S3C2410_USBDREG(0x0254)
+
+#define S3C2410_UDC_EP4_DMA_CON		S3C2410_USBDREG(0x0258)
+#define S3C2410_UDC_EP4_DMA_UNIT	S3C2410_USBDREG(0x025c)
+#define S3C2410_UDC_EP4_DMA_FIFO	S3C2410_USBDREG(0x0260)
+#define S3C2410_UDC_EP4_DMA_TTC_L	S3C2410_USBDREG(0x0264)
+#define S3C2410_UDC_EP4_DMA_TTC_M	S3C2410_USBDREG(0x0268)
+#define S3C2410_UDC_EP4_DMA_TTC_H	S3C2410_USBDREG(0x026c)
+
+#define S3C2410_UDC_INDEX_REG		S3C2410_USBDREG(0x0178)
+
+/* indexed registers */
+
+#define S3C2410_UDC_MAXP_REG		S3C2410_USBDREG(0x0180)
+
+#define S3C2410_UDC_EP0_CSR_REG		S3C2410_USBDREG(0x0184)
+
+#define S3C2410_UDC_IN_CSR1_REG		S3C2410_USBDREG(0x0184)
+#define S3C2410_UDC_IN_CSR2_REG		S3C2410_USBDREG(0x0188)
+
+#define S3C2410_UDC_OUT_CSR1_REG	S3C2410_USBDREG(0x0190)
+#define S3C2410_UDC_OUT_CSR2_REG	S3C2410_USBDREG(0x0194)
+#define S3C2410_UDC_OUT_FIFO_CNT1_REG	S3C2410_USBDREG(0x0198)
+#define S3C2410_UDC_OUT_FIFO_CNT2_REG	S3C2410_USBDREG(0x019c)
+
+
+
+#define S3C2410_UDC_PWR_ISOUP		(1<<7) // R/W
+#define S3C2410_UDC_PWR_RESET		(1<<3) // R
+#define S3C2410_UDC_PWR_RESUME		(1<<2) // R/W
+#define S3C2410_UDC_PWR_SUSPEND		(1<<1) // R
+#define S3C2410_UDC_PWR_ENSUSPEND	(1<<0) // R/W
+
+#define S3C2410_UDC_PWR_DEFAULT		0x00
+
+#define S3C2410_UDC_INT_EP4		(1<<4) // R/W (clear only)
+#define S3C2410_UDC_INT_EP3		(1<<3) // R/W (clear only)
+#define S3C2410_UDC_INT_EP2		(1<<2) // R/W (clear only)
+#define S3C2410_UDC_INT_EP1		(1<<1) // R/W (clear only)
+#define S3C2410_UDC_INT_EP0		(1<<0) // R/W (clear only)
+
+#define S3C2410_UDC_USBINT_RESET	(1<<2) // R/W (clear only)
+#define S3C2410_UDC_USBINT_RESUME	(1<<1) // R/W (clear only)
+#define S3C2410_UDC_USBINT_SUSPEND	(1<<0) // R/W (clear only)
+
+#define S3C2410_UDC_INTE_EP4		(1<<4) // R/W
+#define S3C2410_UDC_INTE_EP3		(1<<3) // R/W
+#define S3C2410_UDC_INTE_EP2		(1<<2) // R/W
+#define S3C2410_UDC_INTE_EP1		(1<<1) // R/W
+#define S3C2410_UDC_INTE_EP0		(1<<0) // R/W
+
+#define S3C2410_UDC_USBINTE_RESET	(1<<2) // R/W
+#define S3C2410_UDC_USBINTE_SUSPEND	(1<<0) // R/W
+
+
+#define S3C2410_UDC_INDEX_EP0		(0x00)
+#define S3C2410_UDC_INDEX_EP1		(0x01) // ??
+#define S3C2410_UDC_INDEX_EP2		(0x02) // ??
+#define S3C2410_UDC_INDEX_EP3		(0x03) // ??
+#define S3C2410_UDC_INDEX_EP4		(0x04) // ??
+
+#define S3C2410_UDC_ICSR1_CLRDT		(1<<6) // R/W
+#define S3C2410_UDC_ICSR1_SENTSTL	(1<<5) // R/W (clear only)
+#define S3C2410_UDC_ICSR1_SENDSTL	(1<<4) // R/W
+#define S3C2410_UDC_ICSR1_FFLUSH	(1<<3) // W   (set only)
+#define S3C2410_UDC_ICSR1_UNDRUN	(1<<2) // R/W (clear only)
+#define S3C2410_UDC_ICSR1_PKTRDY	(1<<0) // R/W (set only)
+
+#define S3C2410_UDC_ICSR2_AUTOSET	(1<<7) // R/W
+#define S3C2410_UDC_ICSR2_ISO		(1<<6) // R/W
+#define S3C2410_UDC_ICSR2_MODEIN	(1<<5) // R/W
+#define S3C2410_UDC_ICSR2_DMAIEN	(1<<4) // R/W
+
+#define S3C2410_UDC_OCSR1_CLRDT		(1<<7) // R/W
+#define S3C2410_UDC_OCSR1_SENTSTL	(1<<6) // R/W (clear only)
+#define S3C2410_UDC_OCSR1_SENDSTL	(1<<5) // R/W
+#define S3C2410_UDC_OCSR1_FFLUSH	(1<<4) // R/W
+#define S3C2410_UDC_OCSR1_DERROR	(1<<3) // R
+#define S3C2410_UDC_OCSR1_OVRRUN	(1<<2) // R/W (clear only)
+#define S3C2410_UDC_OCSR1_PKTRDY	(1<<0) // R/W (clear only)
+
+#define S3C2410_UDC_OCSR2_AUTOCLR	(1<<7) // R/W
+#define S3C2410_UDC_OCSR2_ISO		(1<<6) // R/W
+#define S3C2410_UDC_OCSR2_DMAIEN	(1<<5) // R/W
+
+#define S3C2410_UDC_SETIX(X)	writel(X, S3C2410_UDC_INDEX_REG)
+
+#define S3C2410_UDC_EP0_CSR_OPKRDY	(1<<0)
+#define S3C2410_UDC_EP0_CSR_IPKRDY	(1<<1)
+#define S3C2410_UDC_EP0_CSR_SENTSTL	(1<<2)
+#define S3C2410_UDC_EP0_CSR_DE		(1<<3)
+#define S3C2410_UDC_EP0_CSR_SE		(1<<4)
+#define S3C2410_UDC_EP0_CSR_SENDSTL	(1<<5)
+#define S3C2410_UDC_EP0_CSR_SOPKTRDY	(1<<6)
+#define S3C2410_UDC_EP0_CSR_SSE	(1<<7)
+
+#define S3C2410_UDC_MAXP_8		(1<<0)
+#define S3C2410_UDC_MAXP_16		(1<<1)
+#define S3C2410_UDC_MAXP_32		(1<<2)
+#define S3C2410_UDC_MAXP_64		(1<<3)
+
+/****************** MACROS ******************/
+#define BIT_MASK	0xFF
+
+#if 1
+#define maskl(v,m,a)      \
+		writel((readl(a) & ~(m))|((v)&(m)), (a))
+#else
+#define maskl(v,m,a)	do {					\
+	unsigned long foo = readl(a);				\
+	unsigned long bar = (foo & ~(m)) | ((v)&(m));		\
+	serial_printf("0x%08x:0x%x->0x%x\n", (a), foo, bar);	\
+	writel(bar, (a));					\
+} while(0)
+#endif
+
+#define clear_ep0_sst() do {			\
+	S3C2410_UDC_SETIX(0); 			\
+	writel(0x00, S3C2410_UDC_EP0_CSR_REG); 	\
+} while(0)
+
+#define clear_ep0_se() do {				\
+	S3C2410_UDC_SETIX(0); 				\
+	maskl(S3C2410_UDC_EP0_CSR_SSE,			\
+		BIT_MASK, S3C2410_UDC_EP0_CSR_REG); 	\
+} while(0)
+
+#define clear_ep0_opr() do {				\
+	S3C2410_UDC_SETIX(0);				\
+	maskl(S3C2410_UDC_EP0_CSR_SOPKTRDY,		\
+		BIT_MASK, S3C2410_UDC_EP0_CSR_REG); 	\
+} while(0)
+
+#define set_ep0_ipr() do {				\
+	S3C2410_UDC_SETIX(0);				\
+	maskl(S3C2410_UDC_EP0_CSR_IPKRDY,		\
+		BIT_MASK, S3C2410_UDC_EP0_CSR_REG); 	\
+} while(0)
+
+#define set_ep0_de() do {				\
+	S3C2410_UDC_SETIX(0);				\
+	maskl(S3C2410_UDC_EP0_CSR_DE,			\
+		BIT_MASK, S3C2410_UDC_EP0_CSR_REG);	\
+} while(0)
+
+#define set_ep0_ss() do {				\
+	S3C2410_UDC_SETIX(0);				\
+	maskl(S3C2410_UDC_EP0_CSR_SENDSTL,		\
+		BIT_MASK, S3C2410_UDC_EP0_CSR_REG);	\
+} while(0)
+
+#define set_ep0_de_out() do {				\
+	S3C2410_UDC_SETIX(0);				\
+	maskl((S3C2410_UDC_EP0_CSR_SOPKTRDY	 	\
+		| S3C2410_UDC_EP0_CSR_DE),		\
+		BIT_MASK, S3C2410_UDC_EP0_CSR_REG);	\
+} while(0)
+
+#define set_ep0_sse_out() do {				\
+	S3C2410_UDC_SETIX(0);				\
+	maskl((S3C2410_UDC_EP0_CSR_SOPKTRDY 		\
+		| S3C2410_UDC_EP0_CSR_SSE),		\
+		BIT_MASK, S3C2410_UDC_EP0_CSR_REG);	\
+} while(0)
+
+#define set_ep0_de_in() do {				\
+	S3C2410_UDC_SETIX(0);				\
+	maskl((S3C2410_UDC_EP0_CSR_IPKRDY		\
+		| S3C2410_UDC_EP0_CSR_DE),		\
+		BIT_MASK, S3C2410_UDC_EP0_CSR_REG);	\
+} while(0)
+
+
+#if 0
+
+#define clear_stall_ep1_out(base) do {			\
+	S3C2410_UDC_SETIX(base,EP1);			\
+	orl(0,base+S3C2410_UDC_OUT_CSR1_REG);		\
+} while(0)
+
+
+#define clear_stall_ep2_out(base) do {			\
+	S3C2410_UDC_SETIX(base,EP2);			\
+	orl(0, base+S3C2410_UDC_OUT_CSR1_REG);		\
+} while(0)
+
+
+#define clear_stall_ep3_out(base) do {			\
+	S3C2410_UDC_SETIX(base,EP3);			\
+	orl(0,base+S3C2410_UDC_OUT_CSR1_REG);		\
+} while(0)
+
+
+#define clear_stall_ep4_out(base) do {			\
+	S3C2410_UDC_SETIX(base,EP4);			\
+	orl(0, base+S3C2410_UDC_OUT_CSR1_REG);		\
+} while(0)
+
+#endif
+
+/* S3C2410 Endpoint parameters */
+#define EP0_MAX_PACKET_SIZE	16
+#define UDC_OUT_ENDPOINT 	2
+#define UDC_OUT_PACKET_SIZE	64
+#define UDC_IN_ENDPOINT		1
+#define UDC_IN_PACKET_SIZE 	64
+#define UDC_INT_ENDPOINT	5
+#define UDC_INT_PACKET_SIZE	16
+#define UDC_BULK_PACKET_SIZE	16
+
+#endif
Index: u-boot/drivers/usbdcore_ep0.c
===================================================================
--- u-boot.orig/drivers/usbdcore_ep0.c
+++ u-boot/drivers/usbdcore_ep0.c
@@ -43,7 +43,7 @@
 
 #include <common.h>
 
-#if defined(CONFIG_OMAP1510) && defined(CONFIG_USB_DEVICE)
+#if defined(CONFIG_USB_DEVICE)
 #include "usbdcore.h"
 
 #if 0
@@ -187,9 +187,13 @@
 	if (!urb || !urb->buffer || !urb->buffer_length
 	    || (urb->buffer_length < 255)) {
 		dbg_ep0 (2, "invalid urb %p", urb);
+		serial_printf("invalid urb %p", urb);
 		return -1L;
 	}
 
+	/* re-initialize the ep0 buffer pointer */
+	urb->buffer = (u8 *) urb->buffer_data;
+
 	/* setup tx urb */
 	urb->actual_length = 0;
 	cp = urb->buffer;
@@ -206,17 +210,8 @@
 			     usbd_device_device_descriptor (device, port))) {
 				return -1;
 			}
-			/* copy descriptor for this device */
-			copy_config (urb, device_descriptor,
-				     sizeof (struct usb_device_descriptor),
-				     max);
-
-			/* correct the correct control endpoint 0 max packet size into the descriptor */
-			device_descriptor =
-				(struct usb_device_descriptor *) urb->buffer;
-			device_descriptor->bMaxPacketSize0 =
-				urb->device->bus->maxpacketsize;
-
+			urb->buffer = device_descriptor;
+			urb->actual_length = MIN(sizeof(*device_descriptor), max);
 		}
 		/*dbg_ep0(3, "copied device configuration, actual_length: %x", urb->actual_length); */
 		break;
@@ -250,11 +245,9 @@
 					 index);
 				return -1;
 			}
-			copy_config (urb, configuration_descriptor,
-				     sizeof (struct
-					     usb_configuration_descriptor),
-				     max);
-
+			urb->buffer = configuration_descriptor;
+			urb->actual_length =
+				MIN(le16_to_cpu(configuration_descriptor->wTotalLength), max);
 		}
 		break;
 
@@ -376,6 +369,7 @@
 	dbg_ep0 (0, "entering ep0_recv_setup()");
 	if (!urb || !urb->device) {
 		dbg_ep0 (3, "invalid URB %p", urb);
+		serial_printf("invalid URB %p", urb);
 		return -1;
 	}
 
@@ -400,6 +394,7 @@
 			return device->cdc_recv_setup(request, urb);
 		dbg_ep0 (1, "non standard request: %x",
 			 request->bmRequestType & USB_REQ_TYPE_MASK);
+		serial_printf("non standard request: %x", request->bmRequestType & USB_REQ_TYPE_MASK);
 		return -1;	/* Stall here */
 	}
 
@@ -448,6 +443,8 @@
 		dbg_ep0 (1, "request %s not allowed in UNKNOWN state: %s",
 			 USBD_DEVICE_REQUESTS (request->bRequest),
 			 usbd_device_states[device->device_state]);
+		serial_printf("request %s not allowed in UNKNOWN state: %s", USBD_DEVICE_REQUESTS (request->bRequest), usbd_device_states[device->device_state]);
+		break;
 		return -1;
 	}
 
@@ -545,7 +542,8 @@
 			/*dbg_ep0(2, "address: %d %d %d", */
 			/*        request->wValue, le16_to_cpu(request->wValue), device->address); */
 
-			serial_printf ("DEVICE_ADDRESS_ASSIGNED.. event?\n");
+			//serial_printf ("DEVICE_ADDRESS_ASSIGNED.. event?\n");
+			//udc_set_address(device->address);
 			return 0;
 
 		case USB_REQ_SET_DESCRIPTOR:	/* XXX should we support this? */
Index: u-boot/include/configs/neo1973_gta01.h
===================================================================
--- u-boot.orig/include/configs/neo1973_gta01.h
+++ u-boot/include/configs/neo1973_gta01.h
@@ -173,6 +173,16 @@
 #define CONFIG_USB_OHCI		1
 #endif
 
+#define CONFIG_USB_DEVICE	1
+#define CONFIG_USB_TTY		1
+#define CFG_CONSOLE_IS_IN_ENV	1
+#define CONFIG_USBD_VENDORID 		0x1457     /* Linux/NetChip */
+#define CONFIG_USBD_PRODUCTID_GSERIAL	0x5120    /* gserial */
+#define CONFIG_USBD_PRODUCTID_CDCACM 	0x5119    /* CDC ACM */
+#define CONFIG_USBD_MANUFACTURER	"OpenMoko, Inc"
+#define CONFIG_USBD_PRODUCT_NAME	"Neo1973 Bootloader " U_BOOT_VERSION
+#define CONFIG_EXTRA_ENV_SETTINGS 	"usbtty=cdc_acm\0"
+
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
Index: u-boot/cpu/arm920t/s3c24x0/interrupts.c
===================================================================
--- u-boot.orig/cpu/arm920t/s3c24x0/interrupts.c
+++ u-boot/cpu/arm920t/s3c24x0/interrupts.c
@@ -222,6 +222,13 @@
 	S3C24X0_INTERRUPT * irq = S3C24X0_GetBase_INTERRUPT();
 	u_int32_t intpnd = irq->INTPND;
 
+#ifdef CONFIG_USB_DEVICE
+	if (intpnd & BIT_USBD) {
+		s3c2410_udc_irq();
+		irq->SRCPND = BIT_USBD;
+		irq->INTPND = BIT_USBD;
+	}
+#endif /* USB_DEVICE */
 }
 #endif /* USE_IRQ */
 
Index: u-boot/drivers/usbtty.h
===================================================================
--- u-boot.orig/drivers/usbtty.h
+++ u-boot/drivers/usbtty.h
@@ -29,6 +29,8 @@
 #include "usbdcore_mpc8xx.h"
 #elif defined(CONFIG_OMAP1510)
 #include "usbdcore_omap1510.h"
+#elif defined(CONFIG_S3C2410)
+#include "usbdcore_s3c2410.h"
 #endif
 
 #include <config.h>
Index: u-boot/board/neo1973/common/cmd_neo1973.c
===================================================================
--- u-boot.orig/board/neo1973/common/cmd_neo1973.c
+++ u-boot/board/neo1973/common/cmd_neo1973.c
@@ -72,6 +72,18 @@
 			neo1973_vibrator(1);
 		else
 			neo1973_vibrator(0);
+	} else if (!strcmp(argv[1], "udc")) {
+		if (argc < 3)
+			goto out_help;
+		if (!strcmp(argv[2], "udc")) {
+			if (argc < 4)
+				goto out_help;
+			if (!strcmp(argv[3], "on"))
+				udc_connect();
+			else
+				udc_disconnect();
+		} else
+			goto out_help;
 	} else {
 out_help:
 		printf("Usage:\n%s\n", cmdtp->usage);
@@ -95,5 +107,6 @@
 	"neo1973 charger off - disable charging\n"
 	"neo1973 backlight (on|off) - switch backlight on or off\n"
 	"neo1973 vibrator (on|off) - switch vibrator on or off\n"
+	"neo1973 udc pullup (on|off) - switch pull-up on or off\n"
 );
 #endif	/* CFG_CMD_BDI */
Index: u-boot/board/neo1973/gta01/Makefile
===================================================================
--- u-boot.orig/board/neo1973/gta01/Makefile
+++ u-boot/board/neo1973/gta01/Makefile
@@ -25,7 +25,7 @@
 
 LIB	= lib$(BOARD).a
 
-OBJS	:= gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o
+OBJS	:= gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o
 SOBJS	:= ../common/lowlevel_init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
Index: u-boot/board/neo1973/common/udc.c
===================================================================
--- /dev/null
+++ u-boot/board/neo1973/common/udc.c
@@ -0,0 +1,23 @@
+
+#include <common.h>
+#include <usbdcore.h>
+#include <s3c2410.h>
+
+void udc_ctrl(enum usbd_event event, int param)
+{
+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+
+	switch (event) {
+	case UDC_CTRL_PULLUP_ENABLE:
+#if defined(CONFIG_ARCH_GTA01_v4) || defined(CONFIG_ARCH_GTA01B_v2) || \
+    defined(CONFIG_ARCH_GTA01B_v3) || defined(CONFIG_ARCH_GTA01B_v4)
+		if (param)
+			gpio->GPBDAT |= (1 << 9);
+		else
+			gpio->GPBDAT &= ~(1 << 9);
+#endif
+		break;
+	default:
+		break;
+	}
+}
Index: u-boot/include/usbdcore.h
===================================================================
--- u-boot.orig/include/usbdcore.h
+++ u-boot/include/usbdcore.h
@@ -671,4 +671,10 @@
 void usbd_rcv_complete(struct usb_endpoint_instance *endpoint, int len, int urb_bad);
 void usbd_tx_complete (struct usb_endpoint_instance *endpoint);
 
+enum usbd_event {
+	UDC_CTRL_PULLUP_ENABLE,
+};
+
+void udc_ctrl(enum usbd_event event, int param);
+#endif
 #endif