summaryrefslogtreecommitdiffstats
path: root/meta/packages/uboot/u-boot-mkimage-openmoko-native/uboot-gta02.patch
blob: ca54ebeff741d32f7bb75786b52ef7913307cb9c (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
Add support for new GTA02 version of Neo1973

Index: u-boot/Makefile
===================================================================
--- u-boot.orig/Makefile
+++ u-boot/Makefile
@@ -2038,6 +2038,10 @@
 sbc2410x_config: unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
 
+gta02_config \
+gta02v1_config :	unconfig
+	@sh board/neo1973/gta02/split_by_variant.sh $@
+
 gta01_config \
 gta01v3_config \
 gta01bv2_config \
Index: u-boot/board/neo1973/gta02/Makefile
===================================================================
--- /dev/null
+++ u-boot/board/neo1973/gta02/Makefile
@@ -0,0 +1,64 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= gta02.o pcf50633.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o ../common/bootmenu.o
+SOBJS	:= ../common/lowlevel_init.o
+
+.PHONY:	all
+
+all:	$(LIB) lowevel_foo.bin
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+lowlevel_foo.o:	../common/lowlevel_foo.S
+	$(CC) -c -DTEXT_BASE=0x33F80000 -march=armv4 \
+	  -o lowlevel_foo.o ../common/lowlevel_foo.S
+
+lowlevel_foo:	lowlevel_foo.o ../common/lowlevel_init.o ../common/lowlevel_foo.lds
+	$(LD) -T ../common/lowlevel_foo.lds -Ttext 0x33f80000 -Bstatic \
+	  ../common/lowlevel_init.o lowlevel_foo.o -o lowlevel_foo
+
+lowevel_foo.bin:	lowlevel_foo
+	$(CROSS_COMPILE)objcopy --gap-fill=0xff -O binary \
+	  lowlevel_foo lowlevel_foo.bin
+
+
+clean:
+	rm -f $(SOBJS) $(OBJS) lowlevel_foo lowlevel_foo.o
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend lowlevel_foo.bin
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
Index: u-boot/board/neo1973/gta02/gta02.c
===================================================================
--- /dev/null
+++ u-boot/board/neo1973/gta02/gta02.c
@@ -0,0 +1,313 @@
+/*
+ * (C) 2006-2007 by OpenMoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ *
+ * based on existing S3C2410 startup code in u-boot:
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <s3c2440.h>
+#include <i2c.h>
+
+#include "../common/neo1973.h"
+#include "../common/jbt6k74.h"
+
+#include "pcf50633.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* That many seconds the power key needs to be pressed to power up */
+#define POWER_KEY_SECONDS	2
+
+#define M_MDIV	0x7f		/* Fout = 405.00MHz */
+#define M_PDIV	0x2
+#define M_SDIV	0x1
+
+#define U_M_MDIV	0x38
+#define U_M_PDIV	0x2
+#define U_M_SDIV	0x2
+
+unsigned int neo1973_wakeup_cause;
+extern int nobootdelay;
+
+static inline void delay (unsigned long loops)
+{
+	__asm__ volatile ("1:\n"
+	  "subs %0, %1, #1\n"
+	  "bne 1b":"=r" (loops):"0" (loops));
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+
+	/* to reduce PLL lock time, adjust the LOCKTIME register */
+	clk_power->LOCKTIME = 0xFFFFFF;
+
+	/* configure MPLL */
+	clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
+
+	/* some delay between MPLL and UPLL */
+	delay (4000);
+
+	/* configure UPLL */
+	clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
+
+	/* some delay between MPLL and UPLL */
+	delay (8000);
+
+	/* set up the I/O ports */
+#if defined(CONFIG_ARCH_GTA02_v1)
+	gpio->GPACON = 0x007E1FFF;
+	gpio->GPADAT |= (1 << 16);      /* Set GPA16 to high (nNAND_WP) */
+
+	gpio->GPBCON = 0x00155555;
+	gpio->GPBUP = 0x000007FF;
+
+	gpio->GPCCON = 0x55551155;
+	gpio->GPCUP = 0x0000FFFF;
+
+	gpio->GPDCON = 0x55555555;
+	gpio->GPDUP = 0x0000FFFF;
+
+	gpio->GPECON = 0xAAAAAAAA;
+	gpio->GPEUP = 0x0000FFFF;
+
+	gpio->GPFCON = 0x0000AAAA;
+	gpio->GPFUP = 0x000000FF;
+
+	gpio->GPGCON = 0x013DFDFA;
+	gpio->GPGUP = 0x0000FFFF;
+
+	gpio->GPHCON = 0x0028AAAA;
+	gpio->GPHUP = 0x000007FF;
+
+	gpio->GPJCON = 0x1545541;
+#else
+#error Please define GTA02 version
+#endif
+
+	/* arch number of SMDK2410-Board */
+	gd->bd->bi_arch_number = MACH_TYPE_NEO1973_GTA02;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0x30000100;
+
+	icache_enable();
+	dcache_enable();
+
+	return 0;
+}
+
+int board_late_init(void)
+{
+	extern unsigned char booted_from_nand;
+	unsigned char tmp;
+	char buf[32];
+	int menu_vote = 0; /* <= 0: no, > 0: yes */
+	int seconds = 0;
+
+	/* Initialize the Power Management Unit with a safe register set */
+	pcf50633_init();
+#if 0
+	/* if there's no other reason, must be regular reset */
+	neo1973_wakeup_cause = NEO1973_WAKEUP_RESET;
+
+	if (!booted_from_nand)
+		goto woken_by_reset;
+
+	/* obtain wake-up reason, save INT1 in environment */
+	tmp = pcf50606_reg_read(PCF50606_REG_INT1);
+	sprintf(buf, "0x%02x", tmp);
+	setenv("pcf50606_int1", buf);
+
+	if (tmp & PCF50606_INT1_ALARM) {
+		/* we've been woken up by RTC alarm, boot */
+		neo1973_wakeup_cause = NEO1973_WAKEUP_ALARM;
+		goto continue_boot;
+	}
+	if (tmp & PCF50606_INT1_EXTONR) {
+		/* we've been woken up by charger insert */
+		neo1973_wakeup_cause = NEO1973_WAKEUP_CHARGER;
+	}
+
+	if (tmp & PCF50606_INT1_ONKEYF) {
+		/* we've been woken up by a falling edge of the onkey */
+		neo1973_wakeup_cause = NEO1973_WAKEUP_POWER_KEY;
+	}
+
+	if (neo1973_wakeup_cause == NEO1973_WAKEUP_CHARGER) {
+		/* if we still think it was only a charger insert, boot */
+		goto continue_boot;
+	}
+
+woken_by_reset:
+
+	while (neo1973_wakeup_cause == NEO1973_WAKEUP_RESET ||
+	    neo1973_on_key_pressed()) {
+		if (neo1973_aux_key_pressed())
+			menu_vote++;
+		else
+			menu_vote--;
+
+		if (neo1973_new_second())
+			seconds++;
+		if (seconds >= POWER_KEY_SECONDS)
+			goto continue_boot;
+	}
+	/* Power off if minimum number of seconds not reached */
+	neo1973_poweroff();
+
+continue_boot:
+	jbt6k74_init();
+	jbt6k74_enter_state(JBT_STATE_NORMAL);
+	jbt6k74_display_onoff(1);
+#endif
+
+	/* issue a short pulse with the vibrator */
+	neo1973_vibrator(1);
+	udelay(50000);
+	neo1973_vibrator(0);
+
+	/* switch on the backlight */
+	neo1973_backlight(1);
+
+#if 0
+	{
+		/* check if sd card is inserted, and power-up if it is */
+		S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+		if (!(gpio->GPFDAT & (1 << 5)))
+			gpio->GPBDAT &= ~(1 << 2);
+	}
+
+	if (menu_vote > 0) {
+		bootmenu();
+		nobootdelay = 1;
+	}
+#endif
+
+	return 0;
+}
+
+int dram_init (void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return 0;
+}
+
+u_int32_t get_board_rev(void)
+{
+#if defined(CONFIG_ARCH_GTA02_v1)
+	return 0x00000310;
+#endif
+}
+
+void neo1973_poweroff(void)
+{
+	printf("poweroff\n");
+	udc_disconnect();
+	pcf50633_reg_write(PCF50633_REG_OOCSHDWN, 0x01);
+	/* don't return to caller */
+	while (1) ;
+}
+
+void neo1973_backlight(int on)
+{
+	/* FIXME: PMU based implementation */
+}
+
+/* FIXME: shared */
+void neo1973_vibrator(int on)
+{
+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	if (on)
+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
+		gpio->GPGDAT |= (1 << 11);	/* GPG11 */
+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
+		gpio->GPBDAT |= (1 << 10);	/* GPB10 */
+#elif defined(CONFIG_ARCH_GTA01B_v4) || defined(CONFIG_ARCH_GTA02_v1)
+		gpio->GPBDAT |= (1 << 3);	/* GPB3 */
+#endif
+	else
+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
+		gpio->GPGDAT &= ~(1 << 11);	/* GPG11 */
+#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3)
+		gpio->GPBDAT &= ~(1 << 10);	/* GPB10 */
+#elif defined(CONFIG_ARCH_GTA01B_v4) || defined(CONFIG_ARCH_GTA02_v1)
+		gpio->GPBDAT &= ~(1 << 3);	/* GPB3 */
+#endif
+}
+
+int neo1973_new_second(void)
+{
+	return pcf50633_reg_read(PCF50633_REG_INT1) & PCF50633_INT1_SECOND;
+}
+
+int neo1973_on_key_pressed(void)
+{
+	return !(pcf50633_reg_read(PCF50633_REG_OOCSTAT)
+						& PCF50633_OOCSTAT_ONKEY);
+}
+
+/* FIXME: shared */
+int neo1973_aux_key_pressed(void)
+{
+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	if (gpio->GPFDAT & (1 << 6))
+		return 0;
+	return 1;
+}
+
+/* The sum of all part_size[]s must equal to the NAND size, i.e., 0x4000000.
+   "initrd" is sized such that it can hold two uncompressed 16 bit 640*480
+   images: 640*480*2*2 = 1228800 < 1245184. */
+
+unsigned int dynpart_size[] = {
+    CFG_UBOOT_SIZE, CFG_ENV_SIZE, 0x200000, 0xa0000, 0x1fce0000, 0 };
+char *dynpart_names[] = {
+    "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL };
+
+
+const char *neo1973_get_charge_status(void)
+{
+	/* FIXME */
+	return "unknown";
+}
+
+int neo1973_set_charge_mode(enum neo1973_charger_cmd cmd)
+{
+	/* FIXME */
+	return 0;
+}
Index: u-boot/board/neo1973/gta02/u-boot.lds
===================================================================
--- /dev/null
+++ u-boot/board/neo1973/gta02/u-boot.lds
@@ -0,0 +1,58 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text      :
+	{
+	  cpu/arm920t/start.o	(.text)
+	  cpu/arm920t/s3c24x0/nand_read.o (.text)
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	. = .;
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}
Index: u-boot/include/configs/neo1973_gta02.h
===================================================================
--- /dev/null
+++ u-boot/include/configs/neo1973_gta02.h
@@ -0,0 +1,276 @@
+/*
+ * (C) Copyright 2007 OpenMoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ *
+ * Configuation settings for the FIC Neo1973 GTA02 Linux GSM phone
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* we want to be able to start u-boot directly from within NAND flash */
+#define CONFIG_LL_INIT_NAND_ONLY
+#define CONFIG_S3C2410_NAND_BOOT	1
+#define CONFIG_S3C2410_NAND_SKIP_BAD	1
+
+#define CFG_UBOOT_SIZE		0x40000 /* size of u-boot, for NAND loading */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
+#define	CONFIG_S3C2440		1	/* in a SAMSUNG S3C2410 SoC     */
+#define CONFIG_SMDK2440		1	/* on a SAMSUNG SMDK2410 Board  */
+
+/* input clock of PLL */
+#define CONFIG_SYS_CLK_FREQ	12000000/* the GTA02 has this input clock */
+
+
+#define USE_920T_MMU		1
+#define CONFIG_USE_IRQ		1
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 400*1024)
+					/* >> CFG_VIDEO_LOGO_MAX_SIZE */
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL3          1	/* we use SERIAL 1 on GTA01 */
+
+/************************************************************
+ * RTC
+ ************************************************************/
+#define	CONFIG_RTC_S3C24X0	1
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE		115200
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+#define CONFIG_COMMANDS (\
+			CFG_CMD_BDI	 | \
+			CFG_CMD_LOADS	 | \
+			CFG_CMD_LAODB	 | \
+			CFG_CMD_IMI	 | \
+			CFG_CMD_CACHE	 | \
+			CFG_CMD_MEMORY	 | \
+			CFG_CMD_ENV	 | \
+			/* CFG_CMD_IRQ	 | */  \
+			CFG_CMD_BOOTD	 | \
+			CFG_CMD_CONSOLE	 | \
+			/* CFG_CMD_BMP	 | */ \
+			CFG_CMD_ASKENV	 | \
+			CFG_CMD_RUN	 | \
+			CFG_CMD_ECHO	 | \
+			CFG_CMD_I2C	 | \
+			CFG_CMD_REGINFO	 | \
+			CFG_CMD_IMMAP	 | \
+			CFG_CMD_DATE	 | \
+			CFG_CMD_AUTOSCRIPT | \
+			CFG_CMD_BSP	 | \
+			CFG_CMD_ELF	 | \
+			CFG_CMD_MISC	 | \
+			/* CFG_CMD_USB	 | */ \
+			CFG_CMD_JFFS2	 | \
+			CFG_CMD_DIAG	 | \
+			/* CFG_CMD_HWFLOW	 | */ \
+			CFG_CMD_SAVES	 | \
+			CFG_CMD_NAND	 | \
+			CFG_CMD_PORTIO	 | \
+			CFG_CMD_MMC	 | \
+			CFG_CMD_FAT	 | \
+			CFG_CMD_EXT2	 | \
+			0)
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTARGS    	""
+#define CONFIG_BOOTCOMMAND	"setenv bootargs ${bootargs_base} ${mtdparts}; nand read.e 0x32000000 kernel; bootm 0x32000000"
+
+#define CONFIG_DOS_PARTITION	1
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
+/* what's this ? it's not used anywhere */
+#define CONFIG_KGDB_SER_INDEX	1		/* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP				/* undef to save memory		*/
+#if defined(CONFIG_ARCH_GTA02_v1)
+#define	CFG_PROMPT		"GTA02v1 # "	/* Monitor Command Prompt	*/
+#endif
+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS		64		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x30000000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x33F00000	/* 63 MB in DRAM	*/
+
+#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define	CFG_LOAD_ADDR		0x33000000	/* default load address	*/
+
+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
+/* it to wrap 100 times (total 1562500) to get 1 sec. */
+#define	CFG_HZ			1562500
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define CFG_BOOTMENU
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(8*1024)	/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
+#endif
+
+#if 0
+#define CONFIG_USB_OHCI		1
+#endif
+
+#define CONFIG_USB_DEVICE	1
+#define CONFIG_USB_TTY		1
+#define CFG_CONSOLE_IS_IN_ENV	1
+#define CONFIG_USBD_VENDORID 		0x1457     /* Linux/NetChip */
+#define CONFIG_USBD_PRODUCTID_GSERIAL	0x5120    /* gserial */
+#define CONFIG_USBD_PRODUCTID_CDCACM 	0x5119    /* CDC ACM */
+#define CONFIG_USBD_MANUFACTURER	"OpenMoko, Inc"
+#define CONFIG_USBD_PRODUCT_NAME	"Neo1973 Bootloader " U_BOOT_VERSION
+#define CONFIG_USBD_DFU			1
+#define CONFIG_USBD_DFU_XFER_SIZE 	4096	/* 0x4000 */
+#define CONFIG_USBD_DFU_INTERFACE	2
+
+#define CONFIG_EXTRA_ENV_SETTINGS 					\
+	"usbtty=cdc_acm\0"						\
+	"bootargs_base=rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8\0" \
+	""
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1		0x30000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE	0x08000000 /* 128 MB */
+#define PHYS_SDRAM_RES_SIZE	0x00200000 /* 2 MB for frame buffer */
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+/* No NOR flash in this device */
+#define CFG_NO_FLASH		1
+
+#define	CFG_ENV_IS_IN_NAND	1
+#define CFG_ENV_SIZE		0x40000	/* 128k Total Size of Environment Sector */
+#define CFG_ENV_OFFSET_OOB	1	/* Location of ENV stored in block 0 OOB */
+#define	CFG_PREBOOT_OVERRIDE	1	/* allow preboot from memory */
+
+#define NAND_MAX_CHIPS		1
+#define CFG_NAND_BASE		0x4e000000
+#define CFG_MAX_NAND_DEVICE	1
+
+#define CONFIG_MMC		1
+#define CFG_MMC_BASE		0xff000000
+
+/* EXT2 driver */
+#define CONFIG_EXT2		1
+
+#define CONFIG_FAT		1
+#define CONFIG_SUPPORT_VFAT
+
+#if 1
+/* JFFS2 driver */
+#define CONFIG_JFFS2_CMDLINE	1
+#define CONFIG_JFFS2_NAND	1
+#define CONFIG_JFFS2_NAND_DEV	0
+//#define CONFIG_JFFS2_NAND_OFF	0x634000
+//#define CONFIG_JFFS2_NAND_SIZE	0x39cc000
+#endif
+
+/* ATAG configuration */
+#define CONFIG_INITRD_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_CMDLINE_TAG		1
+#define CONFIG_REVISION_TAG		1
+#if 0
+#define CONFIG_SERIAL_TAG		1
+#endif
+
+#define CONFIG_DRIVER_S3C24X0_I2C	1
+#define CONFIG_HARD_I2C			1
+#define CFG_I2C_SPEED			400000	/* 400kHz according to PCF50633 data sheet */
+#define CFG_I2C_SLAVE			0x7f
+
+/* we have a board_late_init() function */
+#define BOARD_LATE_INIT			1
+
+#if 0
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_S3C2410
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_SPLASH_SCREEN
+#define CFG_VIDEO_LOGO_MAX_SIZE	(640*480+1024+100) /* 100 = slack */
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_UNZIP
+
+#define VIDEO_KBD_INIT_FCT	0
+#define VIDEO_TSTC_FCT		serial_tstc
+#define VIDEO_GETC_FCT		serial_getc
+
+#define LCD_VIDEO_ADDR		0x33d00000
+#endif
+
+#define CONFIG_S3C2410_NAND_BBT                1
+//#define CONFIG_S3C2410_NAND_HWECC              1
+
+#define CONFIG_DRIVER_PCF50633		1
+
+#define MTDIDS_DEFAULT	"nand0=neo1973-nand"
+#define MTPARTS_DEFAULT	"neo1973-nand:256k(u-boot),128k(u-boot_env),2M(kernel),640k(splash),-(jffs2)"
+#define CFG_NAND_DYNPART_MTD_KERNEL_NAME "neo1973-nand"
+#define CONFIG_NAND_DYNPART
+
+#endif	/* __CONFIG_H */
Index: u-boot/board/neo1973/gta02/split_by_variant.sh
===================================================================
--- /dev/null
+++ u-boot/board/neo1973/gta02/split_by_variant.sh
@@ -0,0 +1,37 @@
+#!/bin/sh
+# ---------------------------------------------------------
+#  Set the core module defines according to Core Module
+# ---------------------------------------------------------
+# ---------------------------------------------------------
+# Set up the GTA01 type define
+# ---------------------------------------------------------
+
+CFGINC=${obj}include/config.h
+CFGTMP=${obj}board/neo1973/gta02/config.tmp
+
+mkdir -p ${obj}include
+if [ "$1" == "" ]
+then
+	echo "$0:: No parameters - using GTA02Bv1 config"
+	echo "#define CONFIG_ARCH_GTA02_v1" > $CFGINC
+	echo "CONFIG_USB_DFU_REVISION=0x0310" > $CFGTMP
+else
+	case "$1" in
+	gta02v1_config)
+	echo "#define CONFIG_ARCH_GTA02_v1" > $CFGINC
+	echo "CONFIG_USB_DFU_REVISION=0x0310" > $CFGTMP
+	;;
+
+	*)
+	echo "$0:: Unrecognised config - using GTA02v1 config"
+	echo "#define CONFIG_ARCH_GTA02_v1" > $CFGINC
+	echo "CONFIG_USB_DFU_REVISION=0x0310" > $CFGTMP
+	;;
+
+	esac
+
+fi
+# ---------------------------------------------------------
+# Complete the configuration
+# ---------------------------------------------------------
+$MKCONFIG -a neo1973_gta02 arm arm920t gta02 neo1973 s3c24x0
Index: u-boot/include/pcf50633.h
===================================================================
--- /dev/null
+++ u-boot/include/pcf50633.h
@@ -0,0 +1,235 @@
+#ifndef _PCF50633_H
+#define _PCF50633_H
+
+/* Philips PCF50633 Power Managemnt Unit (PMU) driver
+ * (C) 2006-2007 by OpenMoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ *
+ */
+
+enum pfc50633_regs {
+	PCF50633_REG_VERSION	= 0x00,
+	PCF50633_REG_VARIANT	= 0x01,
+	PCF50633_REG_INT1	= 0x02,	/* Interrupt Status */
+	PCF50633_REG_INT2	= 0x03,	/* Interrupt Status */
+	PCF50633_REG_INT3	= 0x04,	/* Interrupt Status */
+	PCF50633_REG_INT4	= 0x05,	/* Interrupt Status */
+	PCF50633_REG_INT5	= 0x06,	/* Interrupt Status */
+	PCF50633_REG_INT1M	= 0x07,	/* Interrupt Mask */
+	PCF50633_REG_INT2M	= 0x08,	/* Interrupt Mask */
+	PCF50633_REG_INT3M	= 0x09,	/* Interrupt Mask */
+	PCF50633_REG_INT4M	= 0x0a,	/* Interrupt Mask */
+	PCF50633_REG_INT5M	= 0x0b,	/* Interrupt Mask */
+	PCF50633_REG_OOCSHDWN	= 0x0c,
+	PCF50633_REG_OOCWAKE	= 0x0d,
+	PCF50633_REG_OOCTIM1	= 0x0e,
+	PCF50633_REG_OOCTIM2	= 0x0f,
+	PCF50633_REG_OOCMODE	= 0x10,
+	PCF50633_REG_OOCCTL	= 0x11,
+	PCF50633_REG_OOCSTAT	= 0x12,
+	PCF50633_REG_GPIOCTL	= 0x13,
+	PCF50633_REG_GPIO1CFG	= 0x14,
+	PCF50633_REG_GPIO2CFG	= 0x15,
+	PCF50633_REG_GPIO3CFG	= 0x16,
+	PCF50633_REG_GPOCFG	= 0x17,
+	PCF50633_REG_BVMCTL	= 0x18,
+	PCF50633_REG_SVMCTL	= 0x19,
+	PCF50633_REG_AUTOOUT	= 0x1a,
+	PCF50633_REG_AUTOENA	= 0x1b,
+	PCF50633_REG_AUTOCTL	= 0x1c,
+	PCF50633_REG_AUTOMXC	= 0x1d,
+	PCF50633_REG_DOWN1OUT	= 0x1e,
+	PCF50633_REG_DOWN1ENA	= 0x1f,
+	PCF50633_REG_DOWN1CTL	= 0x20,
+	PCF50633_REG_DOWN1MXC	= 0x21,
+	PCF50633_REG_DOWN2OUT	= 0x22,
+	PCF50633_REG_DOWN2ENA	= 0x23,
+	PCF50633_REG_DOWN2CTL	= 0x24,
+	PCF50633_REG_DOWN2MXC	= 0x25,
+	PCF50633_REG_MEMLDOOUT	= 0x26,
+	PCF50633_REG_MEMLDOENA	= 0x27,
+	PCF50633_REG_LEDOUT	= 0x28,
+	PCF50633_REG_LEDENA	= 0x29,
+	PCF50633_REG_LEDCTL	= 0x2a,
+	PCF50633_REG_LEDDIM	= 0x2b,
+	/* reserved */
+	PCF50633_REG_LDO1OUT	= 0x2d,
+	PCF50633_REG_LDO1ENA	= 0x2e,
+	PCF50633_REG_LDO2OUT	= 0x2f,
+	PCF50633_REG_LDO2ENA	= 0x30,
+	PCF50633_REG_LDO3OUT	= 0x31,
+	PCF50633_REG_LDO3ENA	= 0x32,
+	PCF50633_REG_LDO4OUT	= 0x33,
+	PCF50633_REG_LDO4ENA	= 0x34,
+	PCF50633_REG_LDO5OUT	= 0x35,
+	PCF50633_REG_LDO5ENA	= 0x36,
+	PCF50633_REG_LDO6OUT	= 0x37,
+	PCF50633_REG_LDO6ENA	= 0x38,
+	PCF50633_REG_HCLDOOUT	= 0x39,
+	PCF50633_REG_HCLDOENA	= 0x3a,
+	PCF50633_REG_STBYCTL1	= 0x3b,
+	PCF50633_REG_STBYCTL2	= 0x3c,
+	PCF50633_REG_DEBPF1	= 0x3d,
+	PCF50633_REG_DEBPF2	= 0x3e,
+	PCF50633_REG_DEBPF3	= 0x3f,
+	PCF50633_REG_HCLDOOVL	= 0x40,
+	PCF50633_REG_DCDCSTAT	= 0x41,
+	PCF50633_REG_LDOSTAT	= 0x42,
+	PCF50633_REG_MBCC1	= 0x43,
+	PCF50633_REG_MBCC2	= 0x44,
+	PCF50633_REG_MBCC3	= 0x45,
+	PCF50633_REG_MBCC4	= 0x46,
+	PCF50633_REG_MBCC5	= 0x47,
+	PCF50633_REG_MBCC6	= 0x48,
+	PCF50633_REG_MBCC7	= 0x49,
+	PCF50633_REG_MBCC8	= 0x4a,
+	PCF50633_REG_MBCS1	= 0x4b,
+	PCF50633_REG_MBCS2	= 0x4c,
+	PCF50633_REG_MBCS3	= 0x4d,
+	PCF50633_REG_BBCCTL	= 0x4e,
+	PCF50633_REG_ALMGAIN	= 0x4f,
+	PCF50633_REG_ALMDATA	= 0x50,
+	/* reserved */
+	PCF50633_REG_ADCC3	= 0x52,
+	PCF50633_REG_ADCC2	= 0x53,
+	PCF50633_REG_ADCC1	= 0x54,
+	PCF50633_REG_ADCS1	= 0x55,
+	PCF50633_REG_ADCS2	= 0x56,
+	PCF50633_REG_ADCS3	= 0x57,
+	/* reserved */
+	PCF50633_REG_RTCSC	= 0x59,	/* Second */
+	PCF50633_REG_RTCMN	= 0x5a,	/* Minute */
+	PCF50633_REG_RTCHR	= 0x5b,	/* Hour */
+	PCF50633_REG_RTCWD	= 0x5c,	/* Weekday */
+	PCF50633_REG_RTCDT	= 0x5d,	/* Day */
+	PCF50633_REG_RTCMT	= 0x5e,	/* Month */
+	PCF50633_REG_RTCYR	= 0x5f,	/* Year */
+	PCF50633_REG_RTCSCA	= 0x60, /* Alarm Second */
+	PCF50633_REG_RTCMNA	= 0x61, /* Alarm Minute */
+	PCF50633_REG_RTCHRA	= 0x62, /* Alarm Hour */
+	PCF50633_REG_RTCWDA	= 0x63, /* Alarm Weekday */
+	PCF50633_REG_RTCDTA	= 0x64, /* Alarm Day */
+	PCF50633_REG_RTCMTA	= 0x65, /* Alarm Month */
+	PCF50633_REG_RTCYRA	= 0x66, /* Alarm Year */
+
+	PCF50633_REG_MEMBYTE0	= 0x67,
+	PCF50633_REG_MEMBYTE1	= 0x68,
+	PCF50633_REG_MEMBYTE2	= 0x69,
+	PCF50633_REG_MEMBYTE3	= 0x6a,
+	PCF50633_REG_MEMBYTE4	= 0x6b,
+	PCF50633_REG_MEMBYTE5	= 0x6c,
+	PCF50633_REG_MEMBYTE6	= 0x6d,
+	PCF50633_REG_MEMBYTE7	= 0x6e,
+	/* reserved */
+	PCF50633_REG_DCDCPFM	= 0x84,
+	__NUM_PCF50633_REGS
+};
+
+enum pcf50633_reg_int1 {
+	PCF50633_INT1_ADPINS	= 0x01,	/* Adapter inserted */
+	PCF50633_INT1_ADPREM	= 0x02,	/* Adapter removed */
+	PCF50633_INT1_USBINS	= 0x04,	/* USB inserted */
+	PCF50633_INT1_USBREM	= 0x08,	/* USB removed */
+	/* reserved */
+	PCF50633_INT1_ALARM	= 0x40, /* RTC alarm time is reached */
+	PCF50633_INT1_SECOND	= 0x80,	/* RTC periodic second interrupt */
+};
+
+enum pcf50633_reg_int2 {
+	PCF50633_INT2_ONKEYR	= 0x01, /* ONKEY rising edge */
+	PCF50633_INT2_ONKEYF	= 0x02, /* ONKEY falling edge */
+	PCF50633_INT2_EXTON1R	= 0x04, /* EXTON1 rising edge */
+	PCF50633_INT2_EXTON1F	= 0x08, /* EXTON1 falling edge */
+	PCF50633_INT2_EXTON2R	= 0x10, /* EXTON2 rising edge */
+	PCF50633_INT2_EXTON2F	= 0x20, /* EXTON2 falling edge */
+	PCF50633_INT2_EXTON3R	= 0x40, /* EXTON3 rising edge */
+	PCF50633_INT2_EXTON3F	= 0x80, /* EXTON3 falling edge */
+};
+
+enum pcf50633_reg_int3 {
+	PCF50633_INT3_BATFULL	= 0x01, /* Battery full */
+	PCF50633_INT3_CHGHALT	= 0x02,	/* Charger halt */
+	PCF50633_INT3_THLIMON	= 0x04,
+	PCF50633_INT3_THLIMOFF	= 0x08,
+	PCF50633_INT3_USBLIMON	= 0x10,
+	PCF50633_INT3_USBLIMOFF	= 0x20,
+	PCF50633_INT3_ADCRDY	= 0x40,	/* ADC conversion finished */
+	PCF50633_INT3_ONKEY1S	= 0x80,	/* ONKEY pressed 1 second */
+};
+
+enum pcf50633_reg_int4 {
+	PCF50633_INT4_LOWSYS		= 0x01,
+	PCF50633_INT4_LOWBAT		= 0x02,
+	PCF50633_INT4_HIGHTMP		= 0x04,
+	PCF50633_INT4_AUTOPWRFAIL	= 0x08,
+	PCF50633_INT4_DWN1PWRFAIL	= 0x10,
+	PCF50633_INT4_DWN2PWRFAIL	= 0x20,
+	PCF50633_INT4_LEDPWRFAIL	= 0x40,
+	PCF50633_INT4_LEDOVP		= 0x80,
+};
+
+enum pcf50633_reg_int5 {
+	PCF50633_INT4_LDO1PWRFAIL	= 0x01,
+	PCF50633_INT4_LDO2PWRFAIL	= 0x02,
+	PCF50633_INT4_LDO3PWRFAIL	= 0x04,
+	PCF50633_INT4_LDO4PWRFAIL	= 0x08,
+	PCF50633_INT4_LDO5PWRFAIL	= 0x10,
+	PCF50633_INT4_LDO6PWRFAIL	= 0x20,
+	PCF50633_INT4_HCLDOPWRFAIL	= 0x40,
+	PCF50633_INT4_HCLDOOVL		= 0x80,
+};
+
+enum pcf50633_reg_oocwake {
+	PCF50633_OOCWAKE_ONKEY		= 0x01,
+	PCF50633_OOCWAKE_EXTON1		= 0x02,
+	PCF50633_OOCWAKE_EXTON2		= 0x04,
+	PCF50633_OOCWAKE_EXTON3		= 0x08,
+	PCF50633_OOCWAKE_RTC		= 0x10,
+	/* reserved */
+	PCF50633_OOCWAKE_USB		= 0x40,
+	PCF50633_OOCWAKE_ADP		= 0x80,
+};
+
+enum pcf50633_reg_mbcc1 {
+	PCF50633_MBCC1_CHGENA		= 0x01,	/* Charger enable */
+	PCF50633_MBCC1_AUTOSTOP		= 0x02,
+	PCF50633_MBCC1_AUTORES		= 0x04, /* automatic resume */
+	PCF50633_MBCC1_RESUME		= 0x08, /* explicit resume cmd */
+	PCF50633_MBCC1_RESTART		= 0x10, /* restart charging */
+	PCF50633_MBCC1_PREWDTIME_60M	= 0x20,	/* max. precharging time */
+	PCF50633_MBCC1_WDTIME_1H	= 0x00,
+	PCF50633_MBCC1_WDTIME_2H	= 0x40,
+	PCF50633_MBCC1_WDTIME_4H	= 0x80,
+	PCF50633_MBCC1_WDTIME_6H	= 0xc0,
+};
+#define PCF50633_MBCC1_WDTIME_MASK	  0xc0
+
+enum pcf50633_reg_mbcc2 {
+	PCF50633_MBCC2_VBATCOND_2V7	= 0x00,
+	PCF50633_MBCC2_VBATCOND_2V85	= 0x01,
+	PCF50633_MBCC2_VBATCOND_3V	= 0x02,
+	PCF50633_MBCC2_VBATCOND_3V15	= 0x03,
+	PCF50633_MBCC2_VMAX_4V		= 0x00,
+	PCF50633_MBCC2_VMAX_4V20	= 0x28,
+	PCF50633_MBCC2_VRESDEBTIME_64S	= 0x80,	/* debounce time (32/64sec) */
+};
+#define	PCF50633_MBCC2_VBATCOND_MASK	  0x03
+#define PCF50633_MBCC2_VMAX_MASK	  0x3c
+
+#define PCF50633_OOCSTAT_ONKEY		0x01
+
+/* this is to be provided by the board implementation */
+extern const u_int8_t pcf50633_initial_regs[__NUM_PCF50633_REGS];
+
+void pcf50633_reg_write(u_int8_t reg, u_int8_t val);
+
+u_int8_t pcf50633_reg_read(u_int8_t reg);
+
+void pcf50633_reg_set_bit_mask(u_int8_t reg, u_int8_t mask, u_int8_t val);
+void pcf50633_reg_clear_bits(u_int8_t reg, u_int8_t bits);
+
+void pcf50633_init(void);
+void pcf50633_usb_maxcurrent(unsigned int ma);
+
+#endif /* _PCF50633_H */
+
Index: u-boot/drivers/pcf50633.c
===================================================================
--- /dev/null
+++ u-boot/drivers/pcf50633.c
@@ -0,0 +1,142 @@
+#include <common.h>
+
+#ifdef CONFIG_DRIVER_PCF50633
+
+#include <i2c.h>
+#include <pcf50633.h>
+#include <asm/atomic.h>
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+#define PCF50633_I2C_ADDR		0x73
+
+void __pcf50633_reg_write(u_int8_t reg, u_int8_t val)
+{
+	i2c_write(PCF50633_I2C_ADDR, reg, 1, &val, 1);
+}
+
+u_int8_t __pcf50633_reg_read(u_int8_t reg)
+{
+	u_int8_t tmp;
+	i2c_read(PCF50633_I2C_ADDR, reg, 1, &tmp, 1);
+	return tmp;
+}
+
+void pcf50633_reg_write(u_int8_t reg, u_int8_t val)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__pcf50633_reg_write(reg, val);
+	local_irq_restore(flags);
+}
+
+u_int8_t pcf50633_reg_read(u_int8_t reg)
+{
+	unsigned long flags;
+	u_int8_t tmp;
+
+	local_irq_save(flags);
+	tmp = __pcf50633_reg_read(reg);
+	local_irq_restore(flags);
+
+	return tmp;
+}
+
+void pcf50633_reg_set_bit_mask(u_int8_t reg, u_int8_t mask, u_int8_t val)
+{
+	unsigned long flags;
+	u_int8_t tmp;
+
+	local_irq_save(flags);
+	tmp = __pcf50633_reg_read(reg);
+	__pcf50633_reg_write(reg, (val & mask) | (tmp & ~mask));
+	local_irq_restore(flags);
+}
+
+void pcf50633_reg_clear_bits(u_int8_t reg, u_int8_t bits)
+{
+	unsigned long flags;
+	u_int8_t tmp;
+
+	local_irq_save(flags);
+	tmp = pcf50633_reg_read(reg);
+	pcf50633_reg_write(reg, (tmp & ~bits));
+	local_irq_restore(flags);
+}
+
+static const u_int8_t regs_invalid[] = {
+	PCF50633_REG_VERSION,
+	PCF50633_REG_VARIANT,
+	PCF50633_REG_OOCSHDWN,
+	PCF50633_REG_INT1,
+	PCF50633_REG_INT2,
+	PCF50633_REG_INT3,
+	PCF50633_REG_INT4,
+	PCF50633_REG_INT5,
+	PCF50633_REG_OOCSTAT,
+	0x2c,
+	PCF50633_REG_DCDCSTAT,
+	PCF50633_REG_LDOSTAT,
+	PCF50633_REG_MBCS1,
+	PCF50633_REG_MBCS2,
+	PCF50633_REG_MBCS3,
+	PCF50633_REG_ALMDATA,
+	0x51,
+	/* 0x55 ... 0x6e: don't write */
+	/* 0x6f ... 0x83: reserved */
+};
+#define PCF50633_LAST_REG	0x55
+
+static int reg_is_invalid(u_int8_t reg)
+{
+	int i;
+
+	/* all registers above 0x55 (ADCS1) except 0x84 */
+	if (reg == PCF50633_REG_DCDCPFM)
+		return 0;
+	if (reg >= 0x55)
+		return 1;
+
+	for (i = 0; i < ARRAY_SIZE(regs_invalid); i++) {
+		if (regs_invalid[i] > reg)
+			return 0;
+		if (regs_invalid[i] == reg)
+			return 1;
+	}
+
+	return 0;
+}
+
+
+/* initialize PCF50633 register set */
+void pcf50633_init(void)
+{
+	unsigned long flags;
+	u_int8_t i;
+
+	local_irq_save(flags);
+	for (i = 0; i < PCF50633_LAST_REG; i++) {
+		if (reg_is_invalid(i))
+			continue;
+		__pcf50633_reg_write(i, pcf50633_initial_regs[i]);
+	}
+	local_irq_restore(flags);
+}
+
+void pcf50633_usb_maxcurrent(unsigned int ma)
+{
+	u_int8_t val;
+
+	if (ma < 100)
+		val = 0x03;
+	else if (ma < 500)
+		val = 0x00;
+	else if (ma < 1000)
+		val = 0x01;
+	else
+		val = 0x02;
+
+	return pcf50633_reg_set_bit_mask(PCF50633_REG_MBCC7, 0x03, val);
+}
+
+#endif /* CONFIG DRIVER_PCF50633 */
Index: u-boot/board/neo1973/common/lowlevel_init.S
===================================================================
--- u-boot.orig/board/neo1973/common/lowlevel_init.S
+++ u-boot/board/neo1973/common/lowlevel_init.S
@@ -49,7 +49,7 @@
 #define WAIT		 	(0x1<<2)
 #define UBLB		 	(0x1<<3)
 
-#define B1_BWSCON	  	(DW32)
+#define B1_BWSCON	  	(DW16 + WAIT + UBLB)
 #define B2_BWSCON	  	(DW16)
 #define B3_BWSCON	  	(DW16 + WAIT + UBLB)
 #define B4_BWSCON	  	(DW16)
@@ -68,9 +68,9 @@
 
 /* BANK1CON */
 #define B1_Tacs		 	0x0	/*  0clk */
-#define B1_Tcos		 	0x0	/*  0clk */
-#define B1_Tacc		 	0x7	/* 14clk */
-#define B1_Tcoh		 	0x0	/*  0clk */
+#define B1_Tcos		 	0x1	/*  1clk */
+#define B1_Tacc		 	0x4	/*  4clk */
+#define B1_Tcoh		 	0x1	/*  1clk */
 #define B1_Tah		 	0x0	/*  0clk */
 #define B1_Tacp		 	0x0
 #define B1_PMC		 	0x0
@@ -112,7 +112,7 @@
 #if defined (CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
 #define B6_SCAN		 	0x1	/* 9bit */
 #elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \
-      defined(CONFIG_ARCH_GTA01B_v4)
+      defined(CONFIG_ARCH_GTA01B_v4) || defined(CONFIG_ARCH_GTA02_v1)
 #define B6_SCAN		 	0x2	/* 10bit */
 #endif
 
@@ -165,6 +165,18 @@
 	str	r1, [r0]
 #endif
 
+#if defined(CONFIG_ARCH_GTA02_v1)
+	/* enable KEEPACT to make sure PMU keeps us alive */
+	ldr	r0, =0x56000000	/* GPJ base */
+	ldr	r1, [r0, #0xd0]	/* GPJCON */
+	orr	r1, r1, #(1 << 6)
+	str	r1, [r0, #0xd0]
+
+	ldr	r1, [r0, #0xd4]	/* GPJDAT */
+	orr	r1, r1, #(1 << 3)
+	str	r1, [r0, #0xd4]
+#endif
+
 	/* everything is fine now */
 	mov	pc, lr
 
Index: u-boot/board/neo1973/gta02/pcf50633.c
===================================================================
--- /dev/null
+++ u-boot/board/neo1973/gta02/pcf50633.c
@@ -0,0 +1,91 @@
+
+#include <common.h>
+#include <pcf50633.h>
+
+/* initial register set for PCF50633 in Neo1973 GTA02 devices */
+const u_int8_t pcf50633_initial_regs[__NUM_PCF50633_REGS] = {
+	/* gap */
+	[PCF50633_REG_INT1M]	= PCF50633_INT1_SECOND,
+	[PCF50633_REG_INT2M]	= PCF50633_INT2_EXTON3F |
+				  PCF50633_INT2_EXTON3R |
+				  PCF50633_INT2_EXTON2F |
+				  PCF50633_INT2_EXTON2R |
+				  PCF50633_INT2_EXTON1R |
+				  PCF50633_INT2_EXTON1F,
+	[PCF50633_REG_INT3M]	= PCF50633_INT3_ADCRDY,
+	[PCF50633_REG_INT4M]	= 0x00,
+	[PCF50633_REG_INT5M]	= 0x00,
+
+	[PCF50633_REG_OOCWAKE]	= 0xd3, /* wake from ONKEY,EXTON!,RTC,USB,ADP */
+	[PCF50633_REG_OOCTIM1]	= 0xaa,	/* debounce 14ms everything */
+	[PCF50633_REG_OOCTIM2]	= 0x4a,
+	[PCF50633_REG_OOCMODE]	= 0x55,
+	[PCF50633_REG_OOCCTL]	= 0x44,
+
+	[PCF50633_REG_GPIOCTL]	= 0x01,	/* only GPIO1 is input */
+	[PCF50633_REG_GPIO2CFG]	= 0x00,
+	[PCF50633_REG_GPIO3CFG]	= 0x00,
+	[PCF50633_REG_GPOCFG]	= 0x00,
+
+	[PCF50633_REG_SVMCTL]	= 0x08,	/* 3.10V SYS voltage thresh. */
+	[PCF50633_REG_BVMCTL]	= 0x02,	/* 2.80V BAT voltage thresh. */
+
+	[PCF50633_REG_STBYCTL1]	= 0x00,
+	[PCF50633_REG_STBYCTL2]	= 0x00,
+
+	[PCF50633_REG_DEBPF1]	= 0xff,
+	[PCF50633_REG_DEBPF2]	= 0xff,
+	[PCF50633_REG_DEBPF2]	= 0x3f,
+
+	[PCF50633_REG_AUTOOUT]	= 0x6b,	/* 3.300V */
+	[PCF50633_REG_AUTOENA]	= 0x01,	/* always on */
+	[PCF50633_REG_AUTOCTL]	= 0x00, /* automatic up/down operation */
+	[PCF50633_REG_AUTOMXC]	= 0x0a,	/* 400mA at startup FIXME */
+
+	[PCF50633_REG_DOWN1OUT]	= 0x1b, /* 1.3V (0x1b * .025V + 0.625V) */
+	[PCF50633_REG_DOWN1ENA] = 0x02, /* enabled if GPIO1 = HIGH */
+	[PCF50633_REG_DOWN1CTL]	= 0x00, /* no DVM */
+	[PCF50633_REG_DOWN1MXC]	= 0x22,	/* limit to 510mA at startup */
+
+	[PCF50633_REG_DOWN2OUT]	= 0x2f, /* 1.8V (0x2f * .025V + 0.625V) */
+	[PCF50633_REG_DOWN2ENA]	= 0x02, /* enabled if GPIO1 = HIGH */
+	[PCF50633_REG_DOWN2CTL]	= 0x00,	/* no DVM */
+	[PCF50633_REG_DOWN2MXC]	= 0x22, /* limit to 510mA at startup */
+
+	[PCF50633_REG_MEMLDOOUT] = 0x00,
+	[PCF50633_REG_MEMLDOENA] = 0x00,
+
+	[PCF50633_REG_LEDOUT]	= 0x2f,	/* full backlight power */
+	[PCF50633_REG_LEDENA]	= 0x02,	/* enabled if GPIO1 = HIGH */
+	[PCF50633_REG_LEDCTL]	= 0x05, /* ovp enabled, ocp 500mA */
+	[PCF50633_REG_LEDDIM]	= 0x20,	/* dimming curve */
+
+	[PCF50633_REG_LDO1OUT]	= 0x04,	/* 1.3V (4 * 0.1V + 0.9V) */
+	[PCF50633_REG_LDO1ENA]	= 0x01,	/* always on */
+
+	[PCF50633_REG_LDO2OUT]	= 0x18,	/* 3.3V (24 * 0.1V + 0.9V) */
+	[PCF50633_REG_LDO2ENA]	= 0x02, /* enabled if GPIO1 = HIGH */
+
+	[PCF50633_REG_LDO3OUT]	= 0x15,	/* 3.0V (21 * 0.1V + 0.9V) */
+	[PCF50633_REG_LDO3ENA]	= 0x02, /* enabled if GPIO1 = HIGH */
+
+	[PCF50633_REG_LDO4ENA]	= 0x00,
+	[PCF50633_REG_LDO5ENA]	= 0x00,
+	[PCF50633_REG_LDO6ENA]	= 0x00,
+
+	[PCF50633_REG_HCLDOOUT]	= 0x18,	/* 3.3V (24 * 0.1V + 0.9V) */
+	[PCF50633_REG_HCLDOENA]	= 0x00, /* off by default*/
+
+	[PCF50633_REG_DCDCPFM]	= 0x00, /* off by default*/
+
+	[PCF50633_REG_MBCC1]	= 0xe6,
+	[PCF50633_REG_MBCC2]	= 0x28,	/* Vbatconid=2.7V, Vmax=4.20V */
+	[PCF50633_REG_MBCC3]	= 0x19,	/* 25/255 == 98mA pre-charge */
+	[PCF50633_REG_MBCC4]	= 0xff, /* 255/255 == 1A adapter fast */
+	[PCF50633_REG_MBCC5]	= 0x7f,	/* 127/255 == 500mA usb fast */
+	[PCF50633_REG_MBCC6]	= 0x00, /* cutoff current 1/32 * Ichg */
+	[PCF50633_REG_MBCC7]	= 0x00,	/* 1.6A max bat curr, USB 100mA */
+	[PCF50633_REG_MBCC8]	= 0x00,
+
+	[PCF50633_REG_BBCCTL]	= 0x19,	/* 3V, 200uA, on */
+};
Index: u-boot/board/neo1973/gta02/config.mk
===================================================================
--- /dev/null
+++ u-boot/board/neo1973/gta02/config.mk
@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+#
+# FIC Neo1973 GTA01 board with S3C2410X (ARM920T) cpu
+#
+# see http://www.samsung.com/ for more information on SAMSUNG
+#
+
+# GTA01v3 has 1 bank of 64 MB SDRAM
+# GTA01v4 has 1 bank of 64 MB SDRAM
+#
+# 	3000'0000 to 3400'0000
+# we load ourself to 33F8'0000
+#
+# GTA01Bv2 or later has 1 bank of 128 MB SDRAM
+#
+# 	3000'0000 to 3800'0000
+# we load ourself to 37F8'0000
+#
+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
+# optionally with a ramdisk at 3080'0000
+#
+# download area is 3200'0000 or 3300'0000
+
+CONFIG_USB_DFU_VENDOR=0x1457
+CONFIG_USB_DFU_PRODUCT=0x5119
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+TEXT_BASE = 0x33F80000
Index: u-boot/drivers/smedia3362.c
===================================================================
--- /dev/null
+++ u-boot/drivers/smedia3362.c
@@ -0,0 +1,125 @@
+/*
+ * (C) Copyright 2007 by OpenMoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_VIDEO_GLAMO3362)
+
+#include <video_fb.h>
+#include "videomodes.h"
+#include <s3c2410.h>
+#include "smedia3362.h"
+
+/*
+ * Export Graphic Device
+ */
+GraphicDevice smi;
+
+
+struct glamo_script {
+	u_int16_t reg;
+	u_int16_t val;
+} __attribute__((packed));
+
+/* from 'initial glamo 3365 script' */
+static struct glamo_script gl3362_init_script[] = {
+	/* clock */
+	{ GLAMO_REG_CLOCK_MEMORY, 	0x300a },
+	{ GLAMO_REG_CLOCK_LCD,		0x10aa },
+	{ GLAMO_REG_CLOCK_MMC,		0x100a },
+	{ GLAMO_REG_CLOCK_ISP,		0x32aa },
+	{ GLAMO_REG_CLOCK_JPEG,		0x100a },
+	{ GLAMO_REG_CLOCK_3D,		0x302a },
+	{ GLAMO_REG_CLOCK_2D,		0x302a },
+	//{ GLAMO_REG_CLOCK_RISC1,	0x1aaa },
+	//{ GLAMO_REG_CLOCK_RISC2,	0x002a },
+	{ GLAMO_REG_CLOCK_MPEG,		0x3aaa },
+	{ GLAMO_REG_CLOCK_MPROC,	0x12aa },
+		{ 0xfffe, 5 },
+	{ GLAMO_REG_CLOCK_HOST,		0x000d },
+	{ GLAMO_REG_CLOCK_MEMORY,	0x000a }I,
+	{ GLAMO_REG_CLOCK_LCD,		0x00ee },
+	{ GLAMO_REG_CLOCK_MMC,		0x000a },
+	{ GLAMO_REG_CLOCK_ISP,		0x02aa },
+	{ GLAMO_REG_CLOCK_JPEG,		0x000a },
+	{ GLAMO_REG_CLOCK_3D,		0x002a },
+	{ GLAMO_REG_CLOCK_2D,		0x002a },
+	//{ GLAMO_REG_CLOCK_RISC1,	0x0aaa },
+	//{ GLAMO_REG_CLOCK_RISC2,	0x002a },
+	{ GLAMO_REG_CLOCK_MPEG,		0x0aaa },
+	{ GLAMO_REG_CLOCK_MPROC,	0x02aa },
+		{ 0xfffe, 5 },
+	{ GLAMO_REG_PLL_GEN1,		0x061a }, /* PLL1=50MHz, OSCI=32kHz */
+	{ GLAMO_REG_PLL_GEN3,		0x09c3 }, /* PLL2=80MHz, OSCI=32kHz */
+		{ 0xfffe, 5 },
+	{ GLAMO_REG_CLOCK_GEN5_1,	0x18ff },
+	{ GLAMO_REG_CLOCK_GEN5_2,	0x051f },
+	{ GLAMO_REG_CLOCK_GEN6,		0x2000 },
+	{ GLAMO_REG_CLOCK_GEN7,		0x0105 },
+	{ GLAMO_REG_CLOCK_GEN8,		0x0100 },
+	{ GLAMO_REG_CLOCK_GEN10,	0x0017 },
+	{ GLAMO_REG_CLOCK_GEN11,	0x0017 },
+
+	/* hostbus interface */
+	{ GLAMO_REG_HOSTBUS(1),		0x0e00 },
+	{ GLAMO_REG_HOSTBUS(2),		0x07ff },
+	{ GLAMO_REG_HOSTBUS(4),		0x0080 },
+	{ GLAMO_REG_HOSTBUS(5),		0x0244 },
+	{ GLAMO_REG_HOSTBUS(6),		0x0600 },
+	{ GLAMO_REG_HOSTBUS(12),	0xf00e },
+
+	/* memory */
+	{ GLAMO_REG_MEM_TYPE,		0x0874 }, /* VRAM 8Mbyte */
+	{ GLAMO_REG_MEM_GEN,		0xafaf },
+	{ GLAMO_REG_MEM_TIMING(1),	0x0108 },
+	{ GLAMO_REG_MEM_TIMING(2),	0x0010 },
+	{ GLAMO_REG_MEM_TIMING(3),	0x0000 },
+	{ GLAMO_REG_MEM_TIMING(4),	0x0000 },
+	{ GLAMO_REG_MEM_TIMING(5),	0x0000 },
+	{ GLAMO_REG_MEM_TIMING(6),	0x0000 },
+	{ GLAMO_REG_MEM_TIMING(7),	0x0000 },
+	{ GLAMO_REG_MEM_TIMING(8),	0x1002 },
+	{ GLAMO_REG_MEM_TIMING(9),	0x6006 },
+	{ GLAMO_REG_MEM_TIMING(10),	0x00ff },
+	{ GLAMO_REG_MEM_TIMING(11),	0x0001 },
+	{ GLAMO_REG_MEM_POWER1,		0x0020 },
+	{ GLAMO_REG_MEM_POWRE2,		0x0000 },
+	{ GLAMO_REG_MEM_DRAM1,		0x0000 },
+		{ 0xfffe, 1 },
+	{ GLAMO_REG_MEM_DRAM1,		0xc100 },
+	{ GLAMO_REG_MEM_DRAM2,		0x01d6 },
+};
+
+static int glamo3362_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(gl3362_init_script); i++) {
+		struct glamo_reg *reg = gl3362_init_script[i];
+
+		if (reg->reg == 0xfffe)
+			delay(reg->val);
+		else
+			gl3362_reg_write(reg->reg, reg->val);
+	}
+	/* FIXME */
+}
+
+#endif /* CONFIG_VIDEO_GLAMO3362 */
Index: u-boot/drivers/Makefile
===================================================================
--- u-boot.orig/drivers/Makefile
+++ u-boot/drivers/Makefile
@@ -50,7 +50,7 @@
 	  usbdcore.o usbdfu.o usbdcore_ep0.o usbdcore_omap1510.o usbdcore_s3c2410.o usbtty.o \
 	  videomodes.o w83c553f.o \
 	  ks8695eth.o \
-	  pcf50606.o \
+	  pcf50606.o pcf50633.o \
 	  pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o	\
 	  rpx_pcmcia.o \
 	  fsl_i2c.o s3c2410_fb.o
Index: u-boot/common/cmd_nand.c
===================================================================
--- u-boot.orig/common/cmd_nand.c
+++ u-boot/common/cmd_nand.c
@@ -208,8 +208,10 @@
 		putc('\n');
 		for (i = 0; i < CFG_MAX_NAND_DEVICE; i++) {
 			if (nand_info[i].name)
-				printf("Device %d: %s, sector size %lu KiB\n",
+				printf("Device %d: %s, page size %lu, "
+					"sector size %lu KiB\n",
 					i, nand_info[i].name,
+					nand_info[i].oobblock,
 					nand_info[i].erasesize >> 10);
 		}
 		return 0;
Index: u-boot/drivers/nand/nand_ids.c
===================================================================
--- u-boot.orig/drivers/nand/nand_ids.c
+++ u-boot/drivers/nand/nand_ids.c
@@ -67,7 +67,7 @@
 
 	{"NAND 256MiB 3,3V 8-bit", 	0x71, 512, 256, 0x4000, 0},
 
-	{"NAND 512MiB 3,3V 8-bit", 	0xDC, 512, 512, 0x4000, 0},
+	//{"NAND 512MiB 3,3V 8-bit", 	0xDC, 512, 512, 0x4000, 0},
 
 	/* These are the new chips with large page size. The pagesize
 	* and the erasesize is determined from the extended id bytes
Index: u-boot/board/neo1973/common/udc.c
===================================================================
--- u-boot.orig/board/neo1973/common/udc.c
+++ u-boot/board/neo1973/common/udc.c
@@ -3,6 +3,7 @@
 #include <usbdcore.h>
 #include <s3c2410.h>
 #include <pcf50606.h>
+#include <pcf50633.h>
 
 void udc_ctrl(enum usbd_event event, int param)
 {
@@ -23,6 +24,11 @@
     defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \
     defined(CONFIG_ARCH_GTA01B_v4)
 		pcf50606_charge_autofast(param);
+#elif defined(CONFIG_ARCH_GTA02_v1)
+		if (param)
+			pcf50633_usb_maxcurrent(500);
+		else
+			pcf50633_usb_maxcurrent(0);
 #endif
 		break;
 	default: