path: root/meta/packages/linux/linux-rp-2.6.23+2.6.24-rc8/pda-power.patch

---
 arch/arm/Kconfig                   |    2 
 drivers/Kconfig                    |    2 
 drivers/Makefile                   |    1 
 drivers/power/Kconfig              |   70 +++++
 drivers/power/Makefile             |   28 ++
 drivers/power/adc_battery.c        |  278 +++++++++++++++++++++
 drivers/power/apm_power.c          |  247 +++++++++++++++++++
 drivers/power/ds2760_battery.c     |  475 +++++++++++++++++++++++++++++++++++++
 drivers/power/micro_battery.c      |  257 ++++++++++++++++++++
 drivers/power/olpc_battery.c       |  302 +++++++++++++++++++++++
 drivers/power/pda_power.c          |  263 ++++++++++++++++++++
 drivers/power/pmu_battery.c        |  215 ++++++++++++++++
 drivers/power/power_supply.h       |   42 +++
 drivers/power/power_supply_core.c  |  168 +++++++++++++
 drivers/power/power_supply_leds.c  |  188 ++++++++++++++
 drivers/power/power_supply_sysfs.c |  289 ++++++++++++++++++++++
 drivers/power/simpad-battery.c     |  242 ++++++++++++++++++
 include/linux/power_supply.h       |  175 +++++++++++++
 18 files changed, 3244 insertions(+)

Index: linux-2.6.22/drivers/power/adc_battery.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.22/drivers/power/adc_battery.c	2007-08-23 12:26:28.000000000 +0200
@@ -0,0 +1,278 @@
+/*
+ * Copyright (c) 2007 Paul Sokolovsky
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+//#define DEBUG
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/adc.h>
+#include <linux/adc_battery.h>
+
+#include <asm/irq.h>
+
+#define PIN_NO_VOLT 0
+#define PIN_NO_CURR 1
+#define PIN_NO_TEMP 2
+
+struct battery_adc_priv {
+	struct power_supply batt_cdev;
+
+	struct battery_adc_platform_data *pdata;
+
+	struct adc_request req;
+	struct adc_sense pins[3];
+	struct adc_sense last_good_pins[3];
+
+	struct workqueue_struct *wq;
+	struct delayed_work work;
+};
+
+/*
+ *  Battery properties
+ */
+
+static int adc_battery_get_property(struct power_supply *psy,
+                                    enum power_supply_property psp,
+                                    union power_supply_propval *val)
+{
+	struct battery_adc_priv* drvdata = (struct battery_adc_priv*)psy;
+	int voltage;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = drvdata->pdata->charge_status;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = drvdata->pdata->battery_info.voltage_max_design;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		val->intval = drvdata->pdata->battery_info.voltage_min_design;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		val->intval = drvdata->pdata->battery_info.charge_full_design;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN:
+		val->intval = drvdata->pdata->battery_info.charge_empty_design;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = drvdata->last_good_pins[PIN_NO_VOLT].value * drvdata->pdata->voltage_mult;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		val->intval = drvdata->last_good_pins[PIN_NO_CURR].value * drvdata->pdata->current_mult;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		/* We do calculations in mX, not uX, because todo it in uX we should use "long long"s,
+		 * which is a mess (need to use do_div) when you need divide operation). */
+		voltage = drvdata->last_good_pins[PIN_NO_VOLT].value * drvdata->pdata->voltage_mult;
+		val->intval = ((voltage/1000 - drvdata->pdata->battery_info.voltage_min_design/1000) *
+		     (drvdata->pdata->battery_info.charge_full_design/1000 -
+		      drvdata->pdata->battery_info.charge_empty_design/1000)) /
+		     (drvdata->pdata->battery_info.voltage_max_design/1000 -
+		      drvdata->pdata->battery_info.voltage_min_design/1000);
+		val->intval *= 1000; /* convert final result to uX */
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = drvdata->last_good_pins[PIN_NO_TEMP].value * drvdata->pdata->temperature_mult / 1000;
+		break;
+	default:
+		return -EINVAL;
+	};
+	return 0;
+}
+
+/*
+ *  Driver body
+ */
+
+static void adc_battery_query(struct battery_adc_priv *drvdata)
+{
+	struct battery_adc_platform_data *pdata = drvdata->pdata;
+	int powered, charging;
+
+	adc_request_sample(&drvdata->req);
+
+	powered = power_supply_am_i_supplied(&drvdata->batt_cdev);
+	charging = pdata->is_charging ? pdata->is_charging() : -1;
+
+	if (powered && charging)
+		pdata->charge_status = POWER_SUPPLY_STATUS_CHARGING;
+	else if (powered && !charging && charging != -1)
+		pdata->charge_status = POWER_SUPPLY_STATUS_FULL;
+	else
+		pdata->charge_status = POWER_SUPPLY_STATUS_DISCHARGING;
+
+	/* Throw away invalid samples, this may happen soon after resume for example. */
+	if (drvdata->pins[PIN_NO_VOLT].value > 0) {
+	        memcpy(drvdata->last_good_pins, drvdata->pins, sizeof(drvdata->pins));
+#ifdef DEBUG
+		printk("%d %d %d\n", drvdata->pins[PIN_NO_VOLT].value,
+				     drvdata->pins[PIN_NO_CURR].value,
+				     drvdata->pins[PIN_NO_TEMP].value);
+#endif
+	}
+}
+
+static void adc_battery_charge_power_changed(struct power_supply *bat)
+{
+	struct battery_adc_priv *drvdata = (struct battery_adc_priv*)bat;
+	cancel_delayed_work(&drvdata->work);
+	queue_delayed_work(drvdata->wq, &drvdata->work, 0);
+}
+
+static void adc_battery_work_func(struct work_struct *work)
+{
+	struct delayed_work *delayed_work = container_of(work, struct delayed_work, work);
+	struct battery_adc_priv *drvdata = container_of(delayed_work, struct battery_adc_priv, work);
+
+	adc_battery_query(drvdata);
+	power_supply_changed(&drvdata->batt_cdev);
+
+	queue_delayed_work(drvdata->wq, &drvdata->work, (5000 * HZ) / 1000);
+}
+
+static int adc_battery_probe(struct platform_device *pdev)
+{
+        int retval;
+	struct battery_adc_platform_data *pdata = pdev->dev.platform_data;
+	struct battery_adc_priv *drvdata;
+	int i, j;
+	enum power_supply_property props[] = {
+		POWER_SUPPLY_PROP_STATUS,
+		POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+		POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+		POWER_SUPPLY_PROP_VOLTAGE_NOW,
+		POWER_SUPPLY_PROP_CURRENT_NOW,
+		POWER_SUPPLY_PROP_CHARGE_NOW,
+		POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+		POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN,
+		POWER_SUPPLY_PROP_TEMP,
+	};
+
+	// Initialize ts data structure.
+	drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+
+	drvdata->batt_cdev.name           = pdata->battery_info.name;
+	drvdata->batt_cdev.use_for_apm    = pdata->battery_info.use_for_apm;
+	drvdata->batt_cdev.num_properties = ARRAY_SIZE(props);
+	drvdata->batt_cdev.get_property   = adc_battery_get_property;
+	drvdata->batt_cdev.external_power_changed =
+	                          adc_battery_charge_power_changed;
+
+	if (!pdata->voltage_pin) {
+		drvdata->batt_cdev.num_properties--;
+		props[3] = -1;
+	}
+	if (!pdata->current_pin) {
+		drvdata->batt_cdev.num_properties--;
+		props[4] = -1;
+	}
+	if (!pdata->temperature_pin) {
+		drvdata->batt_cdev.num_properties--;
+		props[8] = -1;
+	}
+
+	drvdata->batt_cdev.properties = kmalloc(
+	                sizeof(*drvdata->batt_cdev.properties) *
+	                drvdata->batt_cdev.num_properties, GFP_KERNEL);
+	if (!drvdata->batt_cdev.properties)
+		return -ENOMEM;
+
+	j = 0;
+	for (i = 0; i < ARRAY_SIZE(props); i++) {
+		if (props[i] == -1)
+			continue;
+		drvdata->batt_cdev.properties[j++] = props[i];
+	}
+
+	retval = power_supply_register(&pdev->dev, &drvdata->batt_cdev);
+	if (retval) {
+		printk("adc-battery: Error registering battery classdev");
+		return retval;
+	}
+
+	drvdata->req.senses = drvdata->pins;
+	drvdata->req.num_senses = ARRAY_SIZE(drvdata->pins);
+	drvdata->pins[PIN_NO_VOLT].name = pdata->voltage_pin;
+	drvdata->pins[PIN_NO_CURR].name = pdata->current_pin;
+	drvdata->pins[PIN_NO_TEMP].name = pdata->temperature_pin;
+
+	adc_request_register(&drvdata->req);
+
+	/* Here we assume raw values in mV */
+	if (!pdata->voltage_mult)
+		pdata->voltage_mult = 1000;
+	/* Here we assume raw values in mA */
+	if (!pdata->current_mult)
+		pdata->current_mult = 1000;
+	/* Here we assume raw values in 1/10 C */
+	if (!pdata->temperature_mult)
+		pdata->temperature_mult = 1000;
+
+	drvdata->pdata = pdata;
+	pdata->drvdata = drvdata; /* Seems ugly, we need better solution */
+
+	platform_set_drvdata(pdev, drvdata);
+
+        // Load initial values ASAP
+	adc_battery_query(drvdata);
+
+	// Still schedule next sampling soon
+	INIT_DELAYED_WORK(&drvdata->work, adc_battery_work_func);
+	drvdata->wq = create_workqueue(pdev->dev.bus_id);
+	if (!drvdata->wq)
+		return -ESRCH;
+
+	queue_delayed_work(drvdata->wq, &drvdata->work, (5000 * HZ) / 1000);
+
+	return retval;
+}
+
+static int adc_battery_remove(struct platform_device *pdev)
+{
+	struct battery_adc_priv *drvdata = platform_get_drvdata(pdev);
+	cancel_delayed_work(&drvdata->work);
+	destroy_workqueue(drvdata->wq);
+	power_supply_unregister(&drvdata->batt_cdev);
+	adc_request_unregister(&drvdata->req);
+	kfree(drvdata->batt_cdev.properties);
+	return 0;
+}
+
+static struct platform_driver adc_battery_driver = {
+	.driver		= {
+		.name	= "adc-battery",
+	},
+	.probe		= adc_battery_probe,
+	.remove		= adc_battery_remove,
+};
+
+static int __init adc_battery_init(void)
+{
+	return platform_driver_register(&adc_battery_driver);
+}
+
+static void __exit adc_battery_exit(void)
+{
+	platform_driver_unregister(&adc_battery_driver);
+}
+
+module_init(adc_battery_init)
+module_exit(adc_battery_exit)
+
+MODULE_AUTHOR("Paul Sokolovsky");
+MODULE_DESCRIPTION("Battery driver for ADC device");
+MODULE_LICENSE("GPL");
Index: linux-2.6.22/drivers/power/apm_power.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.22/drivers/power/apm_power.c	2007-08-23 12:13:52.000000000 +0200
@@ -0,0 +1,247 @@
+/*
+ * Copyright (c) 2007 Anton Vorontsov <cbou@mail.ru>
+ * Copyright (c) 2007 Eugeny Boger <eugenyboger@dgap.mipt.ru>
+ *
+ * Author: Eugeny Boger <eugenyboger@dgap.mipt.ru>
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ */
+
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/apm-emulation.h>
+
+#define PSY_PROP(psy, prop, val) psy->get_property(psy, \
+                         POWER_SUPPLY_PROP_##prop, val)
+
+#define _MPSY_PROP(prop, val) main_battery->get_property(main_battery, \
+                                                         prop, val)
+
+#define MPSY_PROP(prop, val) _MPSY_PROP(POWER_SUPPLY_PROP_##prop, val)
+
+static struct power_supply *main_battery;
+
+static void find_main_battery(void)
+{
+	struct device *dev;
+	struct power_supply *bat, *batm;
+	union power_supply_propval full;
+	int max_charge = 0;
+
+	main_battery = NULL;
+	batm = NULL;
+	list_for_each_entry(dev, &power_supply_class->devices, node) {
+		bat = dev_get_drvdata(dev);
+		/* If none of battery devices cantains 'use_for_apm' flag,
+		   choice one with maximum design charge */
+		if (!PSY_PROP(bat, CHARGE_FULL_DESIGN, &full)) {
+			if (full.intval > max_charge) {
+				batm = bat;
+				max_charge = full.intval;
+			}
+		}
+
+		if (bat->use_for_apm)
+			main_battery = bat;
+	}
+	if (!main_battery)
+		main_battery = batm;
+
+	return;
+}
+
+static int calculate_time(int status)
+{
+	union power_supply_propval charge_full, charge_empty;
+	union power_supply_propval charge, I;
+
+	if (MPSY_PROP(CHARGE_FULL, &charge_full)) {
+		/* if battery can't report this property, use design value */
+		if (MPSY_PROP(CHARGE_FULL_DESIGN, &charge_full))
+			return -1;
+	}
+
+	if (MPSY_PROP(CHARGE_EMPTY, &charge_empty)) {
+		/* if battery can't report this property, use design value */
+		if (MPSY_PROP(CHARGE_EMPTY_DESIGN, &charge_empty))
+			charge_empty.intval = 0;
+	}
+
+	if (MPSY_PROP(CHARGE_AVG, &charge)) {
+		/* if battery can't report average value, use momentary */
+		if (MPSY_PROP(CHARGE_NOW, &charge))
+			return -1;
+	}
+
+	if (MPSY_PROP(CURRENT_AVG, &I)) {
+		/* if battery can't report average value, use momentary */
+		if (MPSY_PROP(CURRENT_NOW, &I))
+			return -1;
+	}
+
+	if (I.intval == 0)
+		return 0;
+	else if (status == POWER_SUPPLY_STATUS_CHARGING)
+		return ((charge.intval - charge_full.intval) * 60L) /
+		       I.intval;
+	else
+		return -((charge.intval - charge_empty.intval) * 60L) /
+		        I.intval;
+}
+
+static int calculate_capacity(int using_charge)
+{
+	enum power_supply_property full_prop, empty_prop;
+	enum power_supply_property full_design_prop, empty_design_prop;
+	enum power_supply_property now_prop, avg_prop;
+	union power_supply_propval empty, full, cur;
+	int ret;
+
+	if (using_charge) {
+		full_prop = POWER_SUPPLY_PROP_CHARGE_FULL;
+		empty_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY;
+		full_design_prop = POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN;
+		empty_design_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN;
+		now_prop = POWER_SUPPLY_PROP_CHARGE_NOW;
+		avg_prop = POWER_SUPPLY_PROP_CHARGE_AVG;
+	}
+	else {
+		full_prop = POWER_SUPPLY_PROP_ENERGY_FULL;
+		empty_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY;
+		full_design_prop = POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN;
+		empty_design_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN;
+		now_prop = POWER_SUPPLY_PROP_ENERGY_NOW;
+		avg_prop = POWER_SUPPLY_PROP_ENERGY_AVG;
+	}
+
+	if (_MPSY_PROP(full_prop, &full)) {
+		/* if battery can't report this property, use design value */
+		if (_MPSY_PROP(full_design_prop, &full))
+			return -1;
+	}
+
+	if (_MPSY_PROP(avg_prop, &cur)) {
+		/* if battery can't report average value, use momentary */
+		if (_MPSY_PROP(now_prop, &cur))
+			return -1;
+	}
+
+	if (_MPSY_PROP(empty_prop, &empty)) {
+		/* if battery can't report this property, use design value */
+		if (_MPSY_PROP(empty_design_prop, &empty))
+			empty.intval = 0;
+	}
+
+	if (full.intval - empty.intval)
+		ret =  ((cur.intval - empty.intval) * 100L) /
+		       (full.intval - empty.intval);
+	else
+		return -1;
+
+	if (ret > 100)
+		return 100;
+	else if (ret < 0)
+		return 0;
+
+	return ret;
+}
+
+static void apm_battery_apm_get_power_status(struct apm_power_info *info)
+{
+	union power_supply_propval status;
+	union power_supply_propval capacity, time_to_full, time_to_empty;
+
+	down(&power_supply_class->sem);
+	find_main_battery();
+	if (!main_battery) {
+		up(&power_supply_class->sem);
+		return;
+	}
+
+	/* status */
+
+	if (MPSY_PROP(STATUS, &status))
+		status.intval = POWER_SUPPLY_STATUS_UNKNOWN;
+
+	/* ac line status */
+
+	if ((status.intval == POWER_SUPPLY_STATUS_CHARGING) ||
+	    (status.intval == POWER_SUPPLY_STATUS_NOT_CHARGING) ||
+	    (status.intval == POWER_SUPPLY_STATUS_FULL))
+		info->ac_line_status = APM_AC_ONLINE;
+	else
+		info->ac_line_status = APM_AC_OFFLINE;
+
+	/* battery life (i.e. capacity, in percents) */
+
+	if (MPSY_PROP(CAPACITY, &capacity) == 0)
+		info->battery_life = capacity.intval;
+	else {
+		/* try calculate using energy */
+		info->battery_life = calculate_capacity(0);
+		/* if failed try calculate using charge instead */
+		if (info->battery_life == -1)
+			info->battery_life = calculate_capacity(1);
+	}
+
+	/* charging status */
+
+	if (status.intval == POWER_SUPPLY_STATUS_CHARGING)
+		info->battery_status = APM_BATTERY_STATUS_CHARGING;
+	else {
+		if (info->battery_life > 50)
+			info->battery_status = APM_BATTERY_STATUS_HIGH;
+		else if (info->battery_life > 5)
+			info->battery_status = APM_BATTERY_STATUS_LOW;
+		else
+			info->battery_status = APM_BATTERY_STATUS_CRITICAL;
+	}
+	info->battery_flag = info->battery_status;
+
+	/* time */
+
+	info->units = APM_UNITS_MINS;
+
+	if (status.intval == POWER_SUPPLY_STATUS_CHARGING) {
+		if (MPSY_PROP(TIME_TO_FULL_AVG, &time_to_full)) {
+			if (MPSY_PROP(TIME_TO_FULL_NOW, &time_to_full))
+				info->time = calculate_time(status.intval);
+			else
+				info->time = time_to_full.intval / 60;
+		}
+	}
+	else {
+		if (MPSY_PROP(TIME_TO_EMPTY_AVG, &time_to_empty)) {
+			if (MPSY_PROP(TIME_TO_EMPTY_NOW, &time_to_empty))
+				info->time = calculate_time(status.intval);
+			else
+				info->time = time_to_empty.intval / 60;
+		}
+	}
+
+	up(&power_supply_class->sem);
+	return;
+}
+
+static int __init apm_battery_init(void)
+{
+	printk(KERN_INFO "APM Battery Driver\n");
+
+	apm_get_power_status = apm_battery_apm_get_power_status;
+	return 0;
+}
+
+static void __exit apm_battery_exit(void)
+{
+	apm_get_power_status = NULL;
+	return;
+}
+
+module_init(apm_battery_init);
+module_exit(apm_battery_exit);
+
+MODULE_AUTHOR("Eugeny Boger <eugenyboger@dgap.mipt.ru>");
+MODULE_DESCRIPTION("APM emulation driver for battery monitoring class");
+MODULE_LICENSE("GPL");
Index: linux-2.6.22/drivers/power/ds2760_battery.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.22/drivers/power/ds2760_battery.c	2007-08-23 12:13:52.000000000 +0200
@@ -0,0 +1,475 @@
+/*
+ * Driver for batteries with DS2760 chips inside.
+ *
+ * Copyright (c) 2007 Anton Vorontsov
+ *               2004-2007 Matt Reimer
+ *               2004 Szabolcs Gyurko
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * Author:  Anton Vorontsov <cbou@mail.ru>
+ *          February 2007
+ *
+ *          Matt Reimer <mreimer@vpop.net>
+ *          April 2004, 2005, 2007
+ *
+ *          Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
+ *          September 2004
+ */
+
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/jiffies.h>
+#include <linux/workqueue.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+
+#include "../w1/w1.h"
+#include "../w1/slaves/w1_ds2760.h"
+
+struct ds2760_device_info {
+	struct device *dev;
+
+	/* DS2760 data, valid after calling ds2760_battery_read_status() */
+	unsigned long update_time;      /* jiffies when data read */
+	char raw[DS2760_DATA_SIZE];     /* raw DS2760 data */
+	int voltage_raw;                /* units of 4.88 mV */
+	int voltage_uV;                 /* units of uV */
+	int current_raw;                /* units of 0.625 mA */
+	int current_uA;                 /* units of uA */
+	int accum_current_raw;          /* units of 0.25 mAh */
+	int accum_current_uAh;          /* units of uAh */
+	int temp_raw;                   /* units of 0.125 C */
+	int temp_C;                     /* units of 0.1 C */
+	int rated_capacity;             /* units of uAh */
+	int rem_capacity;               /* percentage */
+	int full_active_uAh;            /* units of uAh */
+	int empty_uAh;                  /* units of uAh */
+	int life_sec;                   /* units of seconds */
+	int charge_status;              /* POWER_SUPPLY_STATUS_* */
+
+	int full_counter;
+	struct power_supply bat;
+	struct device *w1_dev;
+	struct workqueue_struct *monitor_wqueue;
+	struct delayed_work monitor_work;
+};
+
+static unsigned int cache_time = 1000;
+module_param(cache_time, uint, 0644);
+MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
+
+/* Some batteries have their rated capacity stored a N * 10 mAh, while
+ * others use an index into this table. */
+static int rated_capacities[] = {
+	0,
+	920,        /* Samsung */
+	920,        /* BYD */
+	920,        /* Lishen */
+	920,        /* NEC */
+	1440,       /* Samsung */
+	1440,       /* BYD */
+	1440,       /* Lishen */
+	1440,       /* NEC */
+	2880,       /* Samsung */
+	2880,       /* BYD */
+	2880,       /* Lishen */
+	2880        /* NEC */
+};
+
+/* array is level at temps 0C, 10C, 20C, 30C, 40C
+ * temp is in Celsius */
+static int battery_interpolate(int array[], int temp)
+{
+	int index, dt;
+
+	if (temp <= 0)
+		return array[0];
+	if (temp >= 40)
+		return array[4];
+
+	index = temp / 10;
+	dt    = temp % 10;
+
+	return array[index] + (((array[index + 1] - array[index]) * dt) / 10);
+}
+
+static int ds2760_battery_read_status(struct ds2760_device_info *di)
+{
+	int ret, i, start, count, scale[5];
+
+	if (di->update_time && time_before(jiffies, di->update_time +
+	                                   msecs_to_jiffies(cache_time)))
+		return 0;
+
+	/* The first time we read the entire contents of SRAM/EEPROM,
+	 * but after that we just read the interesting bits that change. */
+	if (di->update_time == 0) {
+		start = 0;
+		count = DS2760_DATA_SIZE;
+	}
+	else {
+		start = DS2760_VOLTAGE_MSB;
+		count = DS2760_TEMP_LSB - start + 1;
+	}
+
+	ret = w1_ds2760_read(di->w1_dev, di->raw + start, start, count);
+	if (ret != count) {
+		dev_warn(di->dev, "call to w1_ds2760_read failed (0x%p)\n",
+		         di->w1_dev);
+		return 1;
+	}
+
+	di->update_time = jiffies;
+
+	/* DS2760 reports voltage in units of 4.88mV, but the battery class
+	 * reports in units of uV, so convert by multiplying by 4880. */
+	di->voltage_raw = (di->raw[DS2760_VOLTAGE_MSB] << 3) |
+	                  (di->raw[DS2760_VOLTAGE_LSB] >> 5);
+	di->voltage_uV = di->voltage_raw * 4880;
+
+	/* DS2760 reports current in signed units of 0.625mA, but the battery
+	 * class reports in units of uA, so convert by multiplying by 625. */
+	di->current_raw =
+	    (((signed char)di->raw[DS2760_CURRENT_MSB]) << 5) |
+	                  (di->raw[DS2760_CURRENT_LSB] >> 3);
+	di->current_uA = di->current_raw * 625;
+
+	/* DS2760 reports accumulated current in signed units of 0.25mAh. */
+	di->accum_current_raw =
+	    (((signed char)di->raw[DS2760_CURRENT_ACCUM_MSB]) << 8) |
+	                   di->raw[DS2760_CURRENT_ACCUM_LSB];
+	di->accum_current_uAh = di->accum_current_raw * 250;
+
+	/* DS2760 reports temperature in signed units of 0.125C, but the
+	 * battery class reports in units of 1/10 C, so we convert by
+	 * multiplying by .125 * 10 = 1.25. */
+	di->temp_raw = (((signed char)di->raw[DS2760_TEMP_MSB]) << 3) |
+	                             (di->raw[DS2760_TEMP_LSB] >> 5);
+	di->temp_C = di->temp_raw + (di->temp_raw / 4);
+
+	/* At least some battery monitors (e.g. HP iPAQ) store the battery's
+	 * maximum rated capacity. */
+	if (di->raw[DS2760_RATED_CAPACITY] < ARRAY_SIZE(rated_capacities))
+		di->rated_capacity = rated_capacities[
+		        (unsigned int)di->raw[DS2760_RATED_CAPACITY]];
+	else
+		di->rated_capacity = di->raw[DS2760_RATED_CAPACITY] * 10;
+
+	di->rated_capacity *= 1000; /* convert to uAh */
+
+	/* Calculate the full level at the present temperature. */
+	di->full_active_uAh = di->raw[DS2760_ACTIVE_FULL] << 8 |
+	                      di->raw[DS2760_ACTIVE_FULL + 1];
+
+	scale[0] = di->raw[DS2760_ACTIVE_FULL] << 8 |
+	           di->raw[DS2760_ACTIVE_FULL + 1];
+	for (i = 1; i < 5; i++)
+		scale[i] = scale[i - 1] + di->raw[DS2760_ACTIVE_FULL + 2 + i];
+
+	di->full_active_uAh = battery_interpolate(scale, di->temp_C / 10);
+	di->full_active_uAh *= 1000; /* convert to uAh */
+
+	/* Calculate the empty level at the present temperature. */
+	scale[4] = di->raw[DS2760_ACTIVE_EMPTY + 4];
+	for (i = 3; i >= 0; i--)
+		scale[i] = scale[i + 1] + di->raw[DS2760_ACTIVE_EMPTY + i];
+
+	di->empty_uAh = battery_interpolate(scale, di->temp_C / 10);
+	di->empty_uAh *= 1000; /* convert to uAh */
+
+	/* From Maxim Application Note 131: remaining capacity =
+	 * ((ICA - Empty Value) / (Full Value - Empty Value)) x 100% */
+	di->rem_capacity = ((di->accum_current_uAh - di->empty_uAh) * 100L) /
+	                    (di->full_active_uAh - di->empty_uAh);
+
+	if (di->rem_capacity < 0)
+		di->rem_capacity = 0;
+	if (di->rem_capacity > 100)
+		di->rem_capacity = 100;
+
+	if (di->current_uA)
+		di->life_sec = -((di->accum_current_uAh - di->empty_uAh) *
+		                 3600L) / di->current_uA;
+	else
+		di->life_sec = 0;
+
+	return 0;
+}
+
+static void ds2760_battery_update_status(struct ds2760_device_info *di)
+{
+	int old_charge_status = di->charge_status;
+
+	ds2760_battery_read_status(di);
+
+	if (di->charge_status == POWER_SUPPLY_STATUS_UNKNOWN)
+		di->full_counter = 0;
+
+	if (power_supply_am_i_supplied(&di->bat)) {
+		if (di->current_uA > 10000) {
+			di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
+			di->full_counter = 0;
+		}
+		else if (di->current_uA < -5000) {
+			if (di->charge_status != POWER_SUPPLY_STATUS_NOT_CHARGING)
+				dev_notice(di->dev, "not enough power to "
+				           "charge\n");
+			di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			di->full_counter = 0;
+		}
+		else if (di->current_uA < 10000 &&
+		            di->charge_status != POWER_SUPPLY_STATUS_FULL) {
+
+			/* Don't consider the battery to be full unless
+			 * we've seen the current < 10 mA at least two
+			 * consecutive times. */
+
+			di->full_counter++;
+
+			if (di->full_counter < 2)
+				di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
+			else {
+				unsigned char acr[2];
+				int acr_val;
+
+				/* acr is in units of 0.25 mAh */
+				acr_val = di->full_active_uAh * 4L / 1000;
+
+				acr[0] = acr_val >> 8;
+				acr[1] = acr_val & 0xff;
+
+				if (w1_ds2760_write(di->w1_dev, acr,
+				    DS2760_CURRENT_ACCUM_MSB, 2) < 2)
+					dev_warn(di->dev,
+					         "ACR reset failed\n");
+
+				di->charge_status = POWER_SUPPLY_STATUS_FULL;
+			}
+		}
+	}
+	else {
+		di->charge_status = POWER_SUPPLY_STATUS_DISCHARGING;
+		di->full_counter = 0;
+	}
+
+	if (di->charge_status != old_charge_status)
+		power_supply_changed(&di->bat);
+
+	return;
+}
+
+static void ds2760_battery_work(struct work_struct *work)
+{
+	struct ds2760_device_info *di = container_of(work,
+		struct ds2760_device_info, monitor_work.work);
+	const int interval = HZ * 60;
+
+	dev_dbg(di->dev, "%s\n", __FUNCTION__);
+
+	ds2760_battery_update_status(di);
+	queue_delayed_work(di->monitor_wqueue, &di->monitor_work, interval);
+
+	return;
+}
+
+#define to_ds2760_device_info(x) container_of((x), struct ds2760_device_info, \
+                                              bat);
+
+static void ds2760_battery_external_power_changed(struct power_supply *psy)
+{
+	struct ds2760_device_info *di = to_ds2760_device_info(psy);
+
+	dev_dbg(di->dev, "%s\n", __FUNCTION__);
+
+	cancel_delayed_work(&di->monitor_work);
+	queue_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ/10);
+
+	return;
+}
+
+static int ds2760_battery_get_property(struct power_supply *psy,
+                                       enum power_supply_property psp,
+                                       union power_supply_propval *val)
+{
+	struct ds2760_device_info *di = to_ds2760_device_info(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = di->charge_status;
+		return 0;
+	default:
+		break;
+	}
+
+	ds2760_battery_read_status(di);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = di->voltage_uV;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		val->intval = di->current_uA;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		val->intval = di->rated_capacity;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		val->intval = di->full_active_uAh;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_EMPTY:
+		val->intval = di->empty_uAh;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		val->intval = di->accum_current_uAh;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = di->temp_C;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property ds2760_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_EMPTY,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static int ds2760_battery_probe(struct platform_device *pdev)
+{
+	int retval = 0;
+	struct ds2760_device_info *di;
+	struct ds2760_platform_data *pdata;
+
+	di = kzalloc(sizeof(*di), GFP_KERNEL);
+	if (!di) {
+		retval = -ENOMEM;
+		goto di_alloc_failed;
+	}
+
+	platform_set_drvdata(pdev, di);
+
+	pdata = pdev->dev.platform_data;
+	di->dev                = &pdev->dev;
+	di->w1_dev             = pdev->dev.parent;
+	di->bat.name           = pdev->dev.bus_id;
+	di->bat.type           = POWER_SUPPLY_TYPE_BATTERY;
+	di->bat.properties     = ds2760_battery_props;
+	di->bat.num_properties = ARRAY_SIZE(ds2760_battery_props);
+	di->bat.get_property   = ds2760_battery_get_property;
+	di->bat.external_power_changed =
+	                          ds2760_battery_external_power_changed;
+	di->bat.use_for_apm = 1;
+
+	di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
+
+	retval = power_supply_register(&pdev->dev, &di->bat);
+	if (retval) {
+		dev_err(di->dev, "failed to register battery");
+		goto batt_failed;
+	}
+
+	INIT_DELAYED_WORK(&di->monitor_work, ds2760_battery_work);
+	di->monitor_wqueue = create_singlethread_workqueue(pdev->dev.bus_id);
+	if (!di->monitor_wqueue) {
+		retval = -ESRCH;
+		goto workqueue_failed;
+	}
+	queue_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ * 1);
+
+	goto success;
+
+workqueue_failed:
+	power_supply_unregister(&di->bat);
+batt_failed:
+	kfree(di);
+di_alloc_failed:
+success:
+	return retval;
+}
+
+static int ds2760_battery_remove(struct platform_device *pdev)
+{
+	struct ds2760_device_info *di = platform_get_drvdata(pdev);
+
+	cancel_rearming_delayed_workqueue(di->monitor_wqueue,
+	                                  &di->monitor_work);
+	destroy_workqueue(di->monitor_wqueue);
+	power_supply_unregister(&di->bat);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int ds2760_battery_suspend(struct platform_device *pdev,
+                                  pm_message_t state)
+{
+	struct ds2760_device_info *di = platform_get_drvdata(pdev);
+
+	di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
+
+	return 0;
+}
+
+static int ds2760_battery_resume(struct platform_device *pdev)
+{
+	struct ds2760_device_info *di = platform_get_drvdata(pdev);
+
+	di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
+	power_supply_changed(&di->bat);
+
+	cancel_delayed_work(&di->monitor_work);
+	queue_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ);
+
+	return 0;
+}
+
+#else
+
+#define ds2760_battery_suspend NULL
+#define ds2760_battery_resume NULL
+
+#endif /* CONFIG_PM */
+
+static struct platform_driver ds2760_battery_driver = {
+	.driver = {
+		.name = "ds2760-battery",
+	},
+	.probe	  = ds2760_battery_probe,
+	.remove   = ds2760_battery_remove,
+	.suspend  = ds2760_battery_suspend,
+	.resume	  = ds2760_battery_resume,
+};
+
+static int __init ds2760_battery_init(void)
+{
+	return platform_driver_register(&ds2760_battery_driver);
+}
+
+static void __exit ds2760_battery_exit(void)
+{
+	platform_driver_unregister(&ds2760_battery_driver);
+	return;
+}
+
+module_init(ds2760_battery_init);
+module_exit(ds2760_battery_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>, "
+              "Matt Reimer <mreimer@vpop.net>, "
+              "Anton Vorontsov <cbou@mail.ru>");
+MODULE_DESCRIPTION("ds2760 battery driver");
Index: linux-2.6.22/drivers/power/Kconfig
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.22/drivers/power/Kconfig	2007-08-23 12:13:52.000000000 +0200
@@ -0,0 +1,70 @@
+menuconfig POWER_SUPPLY
+	tristate "Power supply class support"
+	help
+	  Say Y here to enable power supply class support. This allows
+	  power supply (batteries, AC, USB) monitoring by userspace
+	  via sysfs and uevent (if available) and/or APM kernel interface
+	  (if selected below).
+
+if POWER_SUPPLY
+
+config POWER_SUPPLY_DEBUG
+	bool "Power supply debug"
+	help
+	  Say Y here to enable debugging messages for power supply class
+	  and drivers.
+
+config PDA_POWER
+	tristate "Generic PDA/phone power driver"
+	help
+	  Say Y here to enable generic power driver for PDAs and phones with
+	  one or two external power supplies (AC/USB) connected to main and
+	  backup batteries, and optional builtin charger.
+
+config APM_POWER
+	tristate "APM emulation for class batteries"
+	depends on APM_EMULATION
+	help
+	  Say Y here to enable support APM status emulation using
+	  battery class devices.
+
+config BATTERY_DS2760
+	tristate "DS2760 battery driver (HP iPAQ & others)"
+	select W1
+	select W1_SLAVE_DS2760
+	help
+	  Say Y here to enable support for batteries with ds2760 chip.
+
+config BATTERY_PMU
+	tristate "Apple PMU battery"
+	depends on ADB_PMU
+	help
+	  Say Y here to expose battery information on Apple machines
+	  through the generic battery class.
+
+config BATTERY_OLPC
+	tristate "One Laptop Per Child battery"
+	depends on X86_32
+	help
+	  Say Y to enable support for the battery on the OLPC laptop.
+
+# drivers below are not in battery2-2.6 tree
+
+config ADC_BATTERY
+	tristate "Generic ADC battery driver"
+	depends on ADC && POWER_SUPPLY
+	help
+	  Say Y here to enable support for battery monitoring using generic ADC device.
+
+config IPAQ_MICRO_BATTERY
+	tristate "HP iPAQ Micro ASIC battery driver"
+	depends on IPAQ_MICRO && POWER_SUPPLY
+	help
+	  Choose this option if you want to monitor battery status on
+	  Compaq/HP iPAQ h3100 h3600
+
+config MCP_UCB1x00_SIMPAD_BATTERY
+	tristate "SIMpad Battery Reading Support"
+	depends on MCP_UCB1x00 && POWER_SUPPLY
+
+endif # POWER_SUPPLY
Index: linux-2.6.22/drivers/power/Makefile
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.22/drivers/power/Makefile	2007-08-23 12:13:52.000000000 +0200
@@ -0,0 +1,28 @@
+power_supply-objs := power_supply_core.o
+
+ifeq ($(CONFIG_SYSFS),y)
+power_supply-objs += power_supply_sysfs.o
+endif
+
+ifeq ($(CONFIG_LEDS_TRIGGERS),y)
+power_supply-objs += power_supply_leds.o
+endif
+
+ifeq ($(CONFIG_POWER_SUPPLY_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
+
+obj-$(CONFIG_POWER_SUPPLY)         += power_supply.o
+
+obj-$(CONFIG_PDA_POWER)            += pda_power.o
+obj-$(CONFIG_APM_POWER)            += apm_power.o
+
+obj-$(CONFIG_BATTERY_DS2760)       += ds2760_battery.o
+obj-$(CONFIG_BATTERY_PMU)          += pmu_battery.o
+obj-$(CONFIG_BATTERY_OLPC)         += olpc_battery.o
+
+# drivers below are not in battery2-2.6 tree
+
+obj-$(CONFIG_ADC_BATTERY)          += adc_battery.o
+obj-$(CONFIG_IPAQ_MICRO_BATTERY)   += micro_battery.o
+obj-$(CONFIG_MCP_UCB1x00_SIMPAD_BATTERY) += simpad-battery.o
Index: linux-2.6.22/drivers/power/micro_battery.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.22/drivers/power/micro_battery.c	2007-08-23 12:25:20.000000000 +0200
@@ -0,0 +1,257 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * h3600 atmel micro companion support, battery subdevice
+ * based on previous kernel 2.4 version
+ * Author : Alessandro Gardich <gremlin@gremlin.it>
+ *
+ */
+
+
+#include <linux/module.h>
+#include <linux/version.h>
+
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/pm.h>
+#include <linux/sysctl.h>
+#include <linux/proc_fs.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/power_supply.h>
+#include <linux/platform_device.h>
+#include <linux/timer.h>
+
+#include <asm/arch/hardware.h>
+
+#include <asm/arch/h3600.h>
+#include <asm/arch/SA-1100.h>
+
+#include <asm/hardware/micro.h>
+
+#define BATT_PERIOD 10*HZ
+
+#define H3600_BATT_STATUS_HIGH         0x01
+#define H3600_BATT_STATUS_LOW          0x02
+#define H3600_BATT_STATUS_CRITICAL     0x04
+#define H3600_BATT_STATUS_CHARGING     0x08
+#define H3600_BATT_STATUS_CHARGEMAIN   0x10
+#define H3600_BATT_STATUS_DEAD         0x20 /* Battery will not charge */
+#define H3600_BATT_STATUS_NOTINSTALLED 0x20 /* For expansion pack batteries */
+#define H3600_BATT_STATUS_FULL         0x40 /* Battery fully charged (and connected to AC) */
+#define H3600_BATT_STATUS_NOBATTERY    0x80
+#define H3600_BATT_STATUS_UNKNOWN      0xff
+
+
+//static struct power_supply_dev *micro_battery;
+
+static micro_private_t *p_micro;
+
+struct timer_list batt_timer;
+
+struct {
+	int ac;
+	int update_time;
+	int chemistry;
+	int voltage;
+	int temperature;
+	int flag;
+} micro_battery;
+
+static void micro_battery_receive (int len, unsigned char *data) {
+	if (0) {
+		printk(KERN_ERR "h3600_battery - AC = %02x\n", data[0]);
+		printk(KERN_ERR "h3600_battery - BAT1 chemistry = %02x\n", data[1]);
+		printk(KERN_ERR "h3600_battery - BAT1 voltage = %d %02x%02x\n", (data[3]<<8)+data[2], data[2], data[3]);
+		printk(KERN_ERR "h3600_battery - BAT1 status = %02x\n", data[4]);
+	}
+
+	micro_battery.ac = data[0];
+	micro_battery.chemistry = data[1];
+	micro_battery.voltage = ((((unsigned short)data[3]<<8)+data[2]) * 5000L ) * 1000 / 1024;
+	micro_battery.flag = data[4];
+
+	if (len == 9) {
+		if (0) {
+			printk(KERN_ERR "h3600_battery - BAT2 chemistry = %02x\n", data[5]);
+			printk(KERN_ERR "h3600_battery - BAT2 voltage = %d %02x%02x\n", (data[7]<<8)+data[6], data[6], data[7]);
+			printk(KERN_ERR "h3600_battery - BAT2 status = %02x\n", data[8]);
+		}
+	}
+}
+
+static void micro_temperature_receive (int len, unsigned char *data) {
+	micro_battery.temperature = ((unsigned short)data[1]<<8)+data[0];
+}
+
+void h3600_battery_read_status(unsigned long data) {
+
+	if (++data % 2)
+		h3600_micro_tx_msg(0x09,0,NULL);
+	else
+		h3600_micro_tx_msg(0x06,0,NULL);
+
+	batt_timer.expires += BATT_PERIOD;
+	batt_timer.data = data;
+
+	add_timer(&batt_timer);
+}
+
+int get_capacity(struct power_supply *b) {
+    switch (micro_battery.flag) {
+    case H3600_BATT_STATUS_HIGH :     return 100; break;
+    case H3600_BATT_STATUS_LOW :      return 50; break;
+    case H3600_BATT_STATUS_CRITICAL : return 5; break;
+    default: break;
+    }
+    return 0;
+}
+
+int get_status(struct power_supply *b) {
+
+   if (micro_battery.flag == H3600_BATT_STATUS_UNKNOWN)
+      return POWER_SUPPLY_STATUS_UNKNOWN;
+
+   if (micro_battery.flag & H3600_BATT_STATUS_FULL)
+      return POWER_SUPPLY_STATUS_FULL;
+
+   if ((micro_battery.flag & H3600_BATT_STATUS_CHARGING) ||
+       (micro_battery.flag & H3600_BATT_STATUS_CHARGEMAIN))
+      return POWER_SUPPLY_STATUS_CHARGING;
+
+   return POWER_SUPPLY_STATUS_DISCHARGING;
+}
+
+static int micro_batt_get_property(struct power_supply *b,
+                                   enum power_supply_property psp,
+                                   union power_supply_propval *val)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = get_status(b);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = 4700000;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		val->intval = get_capacity(b);
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = micro_battery.temperature;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = micro_battery.voltage;
+		break;
+	default:
+		return -EINVAL;
+	};
+
+	return 0;
+}
+
+static enum power_supply_property micro_batt_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+static struct power_supply h3600_battery = {
+	.name               = "main-battery",
+	.properties         = micro_batt_props,
+	.num_properties     = ARRAY_SIZE(micro_batt_props),
+	.get_property       = micro_batt_get_property,
+	.use_for_apm        = 1,
+};
+
+static int micro_batt_probe (struct platform_device *pdev)
+{
+	if (1) printk(KERN_ERR "micro battery probe : begin\n");
+
+	power_supply_register(&pdev->dev, &h3600_battery);
+
+	{ /*--- callback ---*/
+		p_micro = platform_get_drvdata(pdev);
+		spin_lock(p_micro->lock);
+		p_micro->h_batt = micro_battery_receive;
+		p_micro->h_temp = micro_temperature_receive;
+		spin_unlock(p_micro->lock);
+	}
+
+	{ /*--- timer ---*/
+		init_timer(&batt_timer);
+		batt_timer.expires = jiffies + BATT_PERIOD;
+		batt_timer.data = 0;
+		batt_timer.function = h3600_battery_read_status;
+
+		add_timer(&batt_timer);
+	}
+
+	if (1) printk(KERN_ERR "micro battery probe : end\n");
+	return 0;
+}
+
+static int micro_batt_remove (struct platform_device *pdev)
+{
+	power_supply_unregister(&h3600_battery);
+	{ /*--- callback ---*/
+		init_timer(&batt_timer);
+		p_micro->h_batt = NULL;
+		p_micro->h_temp = NULL;
+		spin_unlock(p_micro->lock);
+	}
+	{ /*--- timer ---*/
+		del_timer_sync(&batt_timer);
+	}
+        return 0;
+}
+
+static int micro_batt_suspend ( struct platform_device *pdev, pm_message_t state)
+{
+	{ /*--- timer ---*/
+		del_timer(&batt_timer);
+	}
+	return 0;
+}
+
+static int micro_batt_resume ( struct platform_device *pdev)
+{
+	{ /*--- timer ---*/
+		add_timer(&batt_timer);
+	}
+	return 0;
+}
+
+struct platform_driver micro_batt_device_driver = {
+	.driver  = {
+		.name    = "h3600-micro-battery",
+	},
+	.probe   = micro_batt_probe,
+	.remove  = micro_batt_remove,
+	.suspend = micro_batt_suspend,
+	.resume  = micro_batt_resume,
+};
+
+static int micro_batt_init (void)
+{
+	return platform_driver_register(&micro_batt_device_driver);
+}
+
+static void micro_batt_cleanup (void)
+{
+	platform_driver_unregister (&micro_batt_device_driver);
+}
+
+module_init (micro_batt_init);
+module_exit (micro_batt_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("gremlin.it");
+MODULE_DESCRIPTION("driver for iPAQ Atmel micro battery");
+
+
Index: linux-2.6.22/drivers/power/olpc_battery.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.22/drivers/power/olpc_battery.c	2007-08-23 12:13:52.000000000 +0200
@@ -0,0 +1,302 @@
+/*
+ * Battery driver for One Laptop Per Child board.
+ *
+ *	Copyright © 2006  David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <asm/io.h>
+
+#define wBAT_VOLTAGE     0xf900  /* *9.76/32,    mV   */
+#define wBAT_CURRENT     0xf902  /* *15.625/120, mA   */
+#define wBAT_TEMP        0xf906  /* *256/1000,   °C  */
+#define wAMB_TEMP        0xf908  /* *256/1000,   °C  */
+#define SOC              0xf910  /* percentage        */
+#define sMBAT_STATUS     0xfaa4
+#define sBAT_PRESENT          1
+#define sBAT_FULL             2
+#define sBAT_DESTROY          4  /* what is this exactly? */
+#define sBAT_LOW             32
+#define sBAT_DISCHG          64
+#define sMCHARGE_STATUS  0xfaa5
+#define sBAT_CHARGE           1
+#define sBAT_OVERTEMP         4
+#define sBAT_NiMH             8
+#define sPOWER_FLAG      0xfa40
+#define ADAPTER_IN            1
+
+/*********************************************************************
+ *		EC locking and access
+ *********************************************************************/
+
+static int lock_ec(void)
+{
+	unsigned long timeo = jiffies + HZ / 20;
+
+	while (1) {
+		unsigned char lock = inb(0x6c) & 0x80;
+		if (!lock)
+			return 0;
+		if (time_after(jiffies, timeo)) {
+			printk(KERN_ERR "olpc_battery: failed to lock EC for "
+			       "battery access\n");
+			return 1;
+		}
+		yield();
+	}
+}
+
+static void unlock_ec(void)
+{
+	outb(0xff, 0x6c);
+	return;
+}
+
+static unsigned char read_ec_byte(unsigned short adr)
+{
+	outb(adr >> 8, 0x381);
+	outb(adr, 0x382);
+	return inb(0x383);
+}
+
+static unsigned short read_ec_word(unsigned short adr)
+{
+	return (read_ec_byte(adr) << 8) | read_ec_byte(adr + 1);
+}
+
+/*********************************************************************
+ *		Power
+ *********************************************************************/
+
+static int olpc_ac_get_prop(struct power_supply *psy,
+                            enum power_supply_property psp,
+                            union power_supply_propval *val)
+{
+	int ret = 0;
+
+	if (lock_ec())
+		return -EIO;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		if (!(read_ec_byte(sMBAT_STATUS) & sBAT_PRESENT)) {
+			ret = -ENODEV;
+			goto out;
+		}
+		val->intval = !!(read_ec_byte(sPOWER_FLAG) & ADAPTER_IN);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+out:
+	unlock_ec();
+	return ret;
+}
+
+static enum power_supply_property olpc_ac_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static struct power_supply olpc_ac = {
+	.name = "olpc-ac",
+	.type = POWER_SUPPLY_TYPE_MAINS,
+	.properties = olpc_ac_props,
+	.num_properties = ARRAY_SIZE(olpc_ac_props),
+	.get_property = olpc_ac_get_prop,
+};
+
+/*********************************************************************
+ *		Battery properties
+ *********************************************************************/
+
+static int olpc_bat_get_property(struct power_supply *psy,
+                                 enum power_supply_property psp,
+                                 union power_supply_propval *val)
+{
+	int ret = 0;
+
+	if (lock_ec())
+		return -EIO;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		{
+			int status = POWER_SUPPLY_STATUS_UNKNOWN;
+
+			val->intval = read_ec_byte(sMBAT_STATUS);
+
+			if (!(val->intval & sBAT_PRESENT)) {
+				ret = -ENODEV;
+				goto out;
+			}
+
+			if (val->intval & sBAT_DISCHG)
+				status = POWER_SUPPLY_STATUS_DISCHARGING;
+			else if (val->intval & sBAT_FULL)
+				status = POWER_SUPPLY_STATUS_FULL;
+
+			val->intval = read_ec_byte(sMCHARGE_STATUS);
+			if (val->intval & sBAT_CHARGE)
+				status = POWER_SUPPLY_STATUS_CHARGING;
+
+			val->intval = status;
+			break;
+		}
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = !!(read_ec_byte(sMBAT_STATUS) & sBAT_PRESENT);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		val->intval = read_ec_byte(sMCHARGE_STATUS);
+		if (val->intval & sBAT_OVERTEMP)
+			val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		else
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = read_ec_byte(sMCHARGE_STATUS);
+		if (val->intval & sBAT_NiMH)
+			val->intval = POWER_SUPPLY_TECHNOLOGY_NIMH;
+		else
+			val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		val->intval = read_ec_byte(wBAT_VOLTAGE) * 9760L / 32;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		val->intval = read_ec_byte(wBAT_CURRENT) * 15625L / 120;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		val->intval = read_ec_byte(SOC);
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+		val->intval = read_ec_byte(sMBAT_STATUS);
+		if (val->intval & sBAT_FULL)
+			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+		else if (val->intval & sBAT_LOW)
+			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+		else
+			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = read_ec_byte(wBAT_TEMP) * 256 / 100;
+		break;
+	case POWER_SUPPLY_PROP_TEMP_AMBIENT:
+		val->intval = read_ec_byte(wAMB_TEMP) * 256 / 100;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+out:
+	unlock_ec();
+	return ret;
+}
+
+static enum power_supply_property olpc_bat_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TEMP_AMBIENT,
+};
+
+/*********************************************************************
+ *		Initialisation
+ *********************************************************************/
+
+static struct platform_device *bat_pdev;
+
+static struct power_supply olpc_bat = {
+	.properties = olpc_bat_props,
+	.num_properties = ARRAY_SIZE(olpc_bat_props),
+	.get_property = olpc_bat_get_property,
+	.use_for_apm = 1,
+};
+
+static int __init olpc_bat_init(void)
+{
+	int ret = 0;
+	unsigned short tmp;
+
+	if (!request_region(0x380, 4, "olpc-battery")) {
+		ret = -EIO;
+		goto region_failed;
+	}
+
+	if (lock_ec()) {
+		ret = -EIO;
+		goto lock_failed;
+	}
+
+	tmp = read_ec_word(0xfe92);
+	unlock_ec();
+
+	if (tmp != 0x380) {
+		/* Doesn't look like OLPC EC */
+		ret = -ENODEV;
+		goto not_olpc_ec;
+	}
+
+	bat_pdev = platform_device_register_simple("olpc-battery", 0, NULL, 0);
+	if (IS_ERR(bat_pdev)) {
+		ret = PTR_ERR(bat_pdev);
+		goto pdev_failed;
+	}
+
+	ret = power_supply_register(&bat_pdev->dev, &olpc_ac);
+	if (ret)
+		goto ac_failed;
+
+	olpc_bat.name = bat_pdev->name;
+
+	ret = power_supply_register(&bat_pdev->dev, &olpc_bat);
+	if (ret)
+		goto battery_failed;
+
+	goto success;
+
+battery_failed:
+	power_supply_unregister(&olpc_ac);
+ac_failed:
+	platform_device_unregister(bat_pdev);
+pdev_failed:
+not_olpc_ec:
+lock_failed:
+	release_region(0x380, 4);
+region_failed:
+success:
+	return ret;
+}
+
+static void __exit olpc_bat_exit(void)
+{
+	power_supply_unregister(&olpc_bat);
+	power_supply_unregister(&olpc_ac);
+	platform_device_unregister(bat_pdev);
+	release_region(0x380, 4);
+	return;
+}
+
+module_init(olpc_bat_init);
+module_exit(olpc_bat_exit);
+
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Battery driver for One Laptop Per Child "
+                   "($100 laptop) board.");
Index: linux-2.6.22/drivers/power/pda_power.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.22/drivers/power/pda_power.c	2007-08-23 12:13:52.000000000 +0200
@@ -0,0 +1,263 @@
+/*
+ * Common power driver for PDAs and phones with one or two external
+ * power supplies (AC/USB) connected to main and backup batteries,
+ * and optional builtin charger.
+ *
+ * Copyright 2007 Anton Vorontsov <cbou@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/power_supply.h>
+#include <linux/pda_power.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+
+static inline unsigned int get_irq_flags(struct resource *res)
+{
+	unsigned int flags = IRQF_DISABLED | IRQF_SHARED;
+
+	flags |= res->flags & IRQF_TRIGGER_MASK;
+
+	return flags;
+}
+
+static struct device *dev;
+static struct pda_power_pdata *pdata;
+static struct resource *ac_irq, *usb_irq;
+static struct timer_list charger_timer;
+static struct timer_list supply_timer;
+
+static int pda_power_get_property(struct power_supply *psy,
+                                  enum power_supply_property psp,
+                                  union power_supply_propval *val)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		if (psy->type == POWER_SUPPLY_TYPE_MAINS)
+			val->intval = pdata->is_ac_online ?
+			              pdata->is_ac_online() : 0;
+		else
+			val->intval = pdata->is_usb_online ?
+			              pdata->is_usb_online() : 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static enum power_supply_property pda_power_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static char *pda_power_supplied_to[] = {
+	"main-battery",
+	"backup-battery",
+};
+
+static struct power_supply pda_power_supplies[] = {
+	{
+		.name = "ac",
+		.type = POWER_SUPPLY_TYPE_MAINS,
+		.supplied_to = pda_power_supplied_to,
+		.num_supplicants = ARRAY_SIZE(pda_power_supplied_to),
+		.properties = pda_power_props,
+		.num_properties = ARRAY_SIZE(pda_power_props),
+		.get_property = pda_power_get_property,
+	},
+	{
+		.name = "usb",
+		.type = POWER_SUPPLY_TYPE_USB,
+		.supplied_to = pda_power_supplied_to,
+		.num_supplicants = ARRAY_SIZE(pda_power_supplied_to),
+		.properties = pda_power_props,
+		.num_properties = ARRAY_SIZE(pda_power_props),
+		.get_property = pda_power_get_property,
+	},
+};
+
+static void update_charger(void)
+{
+	if (!pdata->set_charge)
+		return;
+
+	if (pdata->is_ac_online && pdata->is_ac_online()) {
+		dev_dbg(dev, "charger on (AC)\n");
+		pdata->set_charge(PDA_POWER_CHARGE_AC);
+	}
+	else if (pdata->is_usb_online && pdata->is_usb_online()) {
+		dev_dbg(dev, "charger on (USB)\n");
+		pdata->set_charge(PDA_POWER_CHARGE_USB);
+	}
+	else {
+		dev_dbg(dev, "charger off\n");
+		pdata->set_charge(0);
+	}
+
+	return;
+}
+
+static void supply_timer_func(unsigned long irq)
+{
+	if (ac_irq && irq == ac_irq->start)
+		power_supply_changed(&pda_power_supplies[0]);
+	else if (usb_irq && irq == usb_irq->start)
+		power_supply_changed(&pda_power_supplies[1]);
+	return;
+}
+
+static void charger_timer_func(unsigned long irq)
+{
+	update_charger();
+
+	/* Okay, charger set. Now wait a bit before notifying supplicants,
+	 * charge power should stabilize. */
+	supply_timer.data = irq;
+	mod_timer(&supply_timer,
+	          jiffies + msecs_to_jiffies(pdata->wait_for_charger));
+	return;
+}
+
+static irqreturn_t power_changed_isr(int irq, void *unused)
+{
+	/* Wait a bit before reading ac/usb line status and setting charger,
+	 * because ac/usb status readings may lag from irq. */
+	charger_timer.data = irq;
+	mod_timer(&charger_timer,
+	          jiffies + msecs_to_jiffies(pdata->wait_for_status));
+	return IRQ_HANDLED;
+}
+
+static int pda_power_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	dev = &pdev->dev;
+
+	if (pdev->id != -1) {
+		dev_err(dev, "it's meaningless to register several "
+		        "pda_powers, use id = -1\n");
+		ret = -EINVAL;
+		goto wrongid;
+	}
+
+	pdata = pdev->dev.platform_data;
+
+	update_charger();
+
+	if (!pdata->wait_for_status)
+		pdata->wait_for_status = 500;
+
+	if (!pdata->wait_for_charger)
+		pdata->wait_for_charger = 500;
+
+	setup_timer(&charger_timer, charger_timer_func, 0);
+	setup_timer(&supply_timer, supply_timer_func, 0);
+
+	ac_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ac");
+	usb_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "usb");
+	if (!ac_irq && !usb_irq) {
+		dev_err(dev, "no ac/usb irq specified\n");
+		ret = -ENODEV;
+		goto noirqs;
+	}
+
+	if (pdata->supplied_to) {
+		pda_power_supplies[0].supplied_to = pdata->supplied_to;
+		pda_power_supplies[1].supplied_to = pdata->supplied_to;
+		pda_power_supplies[0].num_supplicants = pdata->num_supplicants;
+		pda_power_supplies[1].num_supplicants = pdata->num_supplicants;
+	}
+
+	ret = power_supply_register(&pdev->dev, &pda_power_supplies[0]);
+	if (ret) {
+		dev_err(dev, "failed to register %s power supply\n",
+		        pda_power_supplies[0].name);
+		goto supply0_failed;
+	}
+
+	ret = power_supply_register(&pdev->dev, &pda_power_supplies[1]);
+	if (ret) {
+		dev_err(dev, "failed to register %s power supply\n",
+		        pda_power_supplies[1].name);
+		goto supply1_failed;
+	}
+
+	if (ac_irq) {
+		ret = request_irq(ac_irq->start, power_changed_isr,
+		                  get_irq_flags(ac_irq), ac_irq->name,
+		                  &pda_power_supplies[0]);
+		if (ret) {
+			dev_err(dev, "request ac irq failed\n");
+			goto ac_irq_failed;
+		}
+	}
+
+	if (usb_irq) {
+		ret = request_irq(usb_irq->start, power_changed_isr,
+		                  get_irq_flags(usb_irq), usb_irq->name,
+		                  &pda_power_supplies[1]);
+		if (ret) {
+			dev_err(dev, "request usb irq failed\n");
+			goto usb_irq_failed;
+		}
+	}
+
+	goto success;
+
+usb_irq_failed:
+	if (ac_irq)
+		free_irq(ac_irq->start, &pda_power_supplies[0]);
+ac_irq_failed:
+	power_supply_unregister(&pda_power_supplies[1]);
+supply1_failed:
+	power_supply_unregister(&pda_power_supplies[0]);
+supply0_failed:
+noirqs:
+wrongid:
+success:
+	return ret;
+}
+
+static int pda_power_remove(struct platform_device *pdev)
+{
+	if (usb_irq)
+		free_irq(usb_irq->start, &pda_power_supplies[1]);
+	if (ac_irq)
+		free_irq(ac_irq->start, &pda_power_supplies[0]);
+	del_timer_sync(&charger_timer);
+	del_timer_sync(&supply_timer);
+	power_supply_unregister(&pda_power_supplies[1]);
+	power_supply_unregister(&pda_power_supplies[0]);
+	return 0;
+}
+
+static struct platform_driver pda_power_pdrv = {
+	.driver = {
+		.name = "pda-power",
+	},
+	.probe = pda_power_probe,
+	.remove = pda_power_remove,
+};
+
+static int __init pda_power_init(void)
+{
+	return platform_driver_register(&pda_power_pdrv);
+}
+
+static void __exit pda_power_exit(void)
+{
+	platform_driver_unregister(&pda_power_pdrv);
+	return;
+}
+
+module_init(pda_power_init);
+module_exit(pda_power_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Anton Vorontsov <cbou@mail.ru>");
Index: linux-2.6.22/drivers/power/pmu_battery.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.22/drivers/power/pmu_battery.c	2007-08-23 12:13:52.000000000 +0200
@@ -0,0 +1,215 @@
+/*
+ * Battery class driver for Apple PMU
+ *
+ *	Copyright © 2006  David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/power_supply.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+
+static struct pmu_battery_dev {
+	struct power_supply bat;
+	struct pmu_battery_info *pbi;
+	char name[16];
+	int propval;
+} *pbats[PMU_MAX_BATTERIES];
+
+#define to_pmu_battery_dev(x) container_of(x, struct pmu_battery_dev, bat)
+
+/*********************************************************************
+ *		Power
+ *********************************************************************/
+
+static int pmu_get_ac_prop(struct power_supply *psy,
+                           enum power_supply_property psp,
+                           union power_supply_propval *val)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = (!!(pmu_power_flags & PMU_PWR_AC_PRESENT)) ||
+		              (pmu_battery_count == 0);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property pmu_ac_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static struct power_supply pmu_ac = {
+	.name = "pmu-ac",
+	.type = POWER_SUPPLY_TYPE_MAINS,
+	.properties = pmu_ac_props,
+	.num_properties = ARRAY_SIZE(pmu_ac_props),
+	.get_property = pmu_get_ac_prop,
+};
+
+/*********************************************************************
+ *		Battery properties
+ *********************************************************************/
+
+static char *pmu_batt_types[] = {
+	"Smart", "Comet", "Hooper", "Unknown"
+};
+
+static char *pmu_bat_get_model_name(struct pmu_battery_info *pbi)
+{
+	switch (pbi->flags & PMU_BATT_TYPE_MASK) {
+	case PMU_BATT_TYPE_SMART:
+		return pmu_batt_types[0];
+	case PMU_BATT_TYPE_COMET:
+		return pmu_batt_types[1];
+	case PMU_BATT_TYPE_HOOPER:
+		return pmu_batt_types[2];
+	default: break;
+	}
+	return pmu_batt_types[3];
+}
+
+static int pmu_bat_get_property(struct power_supply *psy,
+                                enum power_supply_property psp,
+                                union power_supply_propval *val)
+{
+	struct pmu_battery_dev *pbat = to_pmu_battery_dev(psy);
+	struct pmu_battery_info *pbi = pbat->pbi;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		if (pbi->flags & PMU_BATT_CHARGING)
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = !!(pbi->flags & PMU_BATT_PRESENT);
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = pmu_bat_get_model_name(pbi);
+		break;
+	case POWER_SUPPLY_PROP_ENERGY_AVG:
+		val->intval = pbi->charge     * 1000; /* mWh -> µWh */
+		break;
+	case POWER_SUPPLY_PROP_ENERGY_FULL:
+		val->intval = pbi->max_charge * 1000; /* mWh -> µWh */
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		val->intval = pbi->amperage   * 1000; /* mA -> µA */
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		val->intval = pbi->voltage    * 1000; /* mV -> µV */
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+		val->intval = pbi->time_remaining;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property pmu_bat_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_ENERGY_AVG,
+	POWER_SUPPLY_PROP_ENERGY_FULL,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+};
+
+/*********************************************************************
+ *		Initialisation
+ *********************************************************************/
+
+static struct platform_device *bat_pdev;
+
+static int __init pmu_bat_init(void)
+{
+	int ret;
+	int i;
+
+	bat_pdev = platform_device_register_simple("pmu-battery",
+	                                           0, NULL, 0);
+	if (IS_ERR(bat_pdev)) {
+		ret = PTR_ERR(bat_pdev);
+		goto pdev_register_failed;
+	}
+
+	ret = power_supply_register(&bat_pdev->dev, &pmu_ac);
+	if (ret)
+		goto ac_register_failed;
+
+	for (i = 0; i < pmu_battery_count; i++) {
+		struct pmu_battery_dev *pbat = kzalloc(sizeof(*pbat),
+		                                       GFP_KERNEL);
+		if (!pbat)
+			break;
+
+		sprintf(pbat->name, "PMU battery %d", i);
+		pbat->bat.name = pbat->name;
+		pbat->bat.properties = pmu_bat_props;
+		pbat->bat.num_properties = ARRAY_SIZE(pmu_bat_props);
+		pbat->bat.get_property = pmu_bat_get_property;
+		pbat->pbi = &pmu_batteries[i];
+
+		ret = power_supply_register(&bat_pdev->dev, &pbat->bat);
+		if (ret) {
+			kfree(pbat);
+			goto battery_register_failed;
+		}
+		pbats[i] = pbat;
+	}
+
+	goto success;
+
+battery_register_failed:
+	while (i--) {
+		if (!pbats[i])
+			continue;
+		power_supply_unregister(&pbats[i]->bat);
+		kfree(pbats[i]);
+	}
+	power_supply_unregister(&pmu_ac);
+ac_register_failed:
+	platform_device_unregister(bat_pdev);
+pdev_register_failed:
+success:
+	return ret;
+}
+
+static void __exit pmu_bat_exit(void)
+{
+	int i;
+
+	for (i = 0; i < PMU_MAX_BATTERIES; i++) {
+		if (!pbats[i])
+			continue;
+		power_supply_unregister(&pbats[i]->bat);
+		kfree(pbats[i]);
+	}
+	power_supply_unregister(&pmu_ac);
+	platform_device_unregister(bat_pdev);
+
+	return;
+}
+
+module_init(pmu_bat_init);
+module_exit(pmu_bat_exit);
+
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PMU battery driver");
Index: linux-2.6.22/drivers/power/power_supply_core.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.22/drivers/power/power_supply_core.c	2007-08-23 12:13:52.000000000 +0200
@@ -0,0 +1,168 @@
+/*
+ *  Universal power supply monitor class
+ *
+ *  Copyright (c) 2007  Anton Vorontsov <cbou@mail.ru>
+ *  Copyright (c) 2004  Szabolcs Gyurko
+ *  Copyright (c) 2003  Ian Molton <spyro@f2s.com>
+ *
+ *  Modified: 2004, Oct     Szabolcs Gyurko
+ *
+ *  You may use this code as per GPL version 2
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/power_supply.h>
+#include "power_supply.h"
+
+struct class *power_supply_class;
+
+static void power_supply_changed_work(struct work_struct *work)
+{
+	struct power_supply *psy = container_of(work, struct power_supply,
+	                                        changed_work);
+	int i;
+
+	dev_dbg(psy->dev, "%s\n", __FUNCTION__);
+
+	for (i = 0; i < psy->num_supplicants; i++) {
+		struct device *dev;
+
+		down(&power_supply_class->sem);
+		list_for_each_entry(dev, &power_supply_class->devices, node) {
+			struct power_supply *pst = dev_get_drvdata(dev);
+
+			if (!strcmp(psy->supplied_to[i], pst->name)) {
+				if (pst->external_power_changed)
+					pst->external_power_changed(pst);
+			}
+		}
+		up(&power_supply_class->sem);
+	}
+
+	power_supply_update_leds(psy);
+
+	kobject_uevent(&psy->dev->kobj, KOBJ_CHANGE);
+
+	return;
+}
+
+void power_supply_changed(struct power_supply *psy)
+{
+	dev_dbg(psy->dev, "%s\n", __FUNCTION__);
+
+	schedule_work(&psy->changed_work);
+
+	return;
+}
+
+int power_supply_am_i_supplied(struct power_supply *psy)
+{
+	union power_supply_propval ret = {0,};
+	struct device *dev;
+
+	down(&power_supply_class->sem);
+	list_for_each_entry(dev, &power_supply_class->devices, node) {
+		struct power_supply *epsy = dev_get_drvdata(dev);
+		int i;
+
+		for (i = 0; i < epsy->num_supplicants; i++) {
+			if (!strcmp(epsy->supplied_to[i], psy->name)) {
+				if (epsy->get_property(epsy,
+				          POWER_SUPPLY_PROP_ONLINE, &ret))
+					continue;
+				if (ret.intval)
+					goto out;
+			}
+		}
+	}
+out:
+	up(&power_supply_class->sem);
+
+	dev_dbg(psy->dev, "%s %d\n", __FUNCTION__, ret.intval);
+
+	return ret.intval;
+}
+
+int power_supply_register(struct device *parent, struct power_supply *psy)
+{
+	int rc = 0;
+
+	psy->dev = device_create(power_supply_class, parent, 0,
+	                         "%s", psy->name);
+	if (IS_ERR(psy->dev)) {
+		rc = PTR_ERR(psy->dev);
+		goto dev_create_failed;
+	}
+
+	dev_set_drvdata(psy->dev, psy);
+
+	INIT_WORK(&psy->changed_work, power_supply_changed_work);
+
+	rc = power_supply_create_attrs(psy);
+	if (rc)
+		goto create_attrs_failed;
+
+	rc = power_supply_create_triggers(psy);
+	if (rc)
+		goto create_triggers_failed;
+
+	power_supply_changed(psy);
+
+	goto success;
+
+create_triggers_failed:
+	power_supply_remove_attrs(psy);
+create_attrs_failed:
+	device_unregister(psy->dev);
+dev_create_failed:
+success:
+	return rc;
+}
+
+void power_supply_unregister(struct power_supply *psy)
+{
+	flush_scheduled_work();
+	power_supply_remove_triggers(psy);
+	power_supply_remove_attrs(psy);
+	device_unregister(psy->dev);
+	return;
+}
+
+static int __init power_supply_class_init(void)
+{
+	power_supply_class = class_create(THIS_MODULE, "power_supply");
+
+	if (IS_ERR(power_supply_class))
+		return PTR_ERR(power_supply_class);
+
+	power_supply_class->dev_uevent = power_supply_uevent;
+
+	return 0;
+}
+
+static void __exit power_supply_class_exit(void)
+{
+	class_destroy(power_supply_class);
+	return;
+}
+
+EXPORT_SYMBOL_GPL(power_supply_changed);
+EXPORT_SYMBOL_GPL(power_supply_am_i_supplied);
+EXPORT_SYMBOL_GPL(power_supply_register);
+EXPORT_SYMBOL_GPL(power_supply_unregister);
+
+/* exported for the APM Power driver, APM emulation */
+EXPORT_SYMBOL_GPL(power_supply_class);
+
+subsys_initcall(power_supply_class_init);
+module_exit(power_supply_class_exit);
+
+MODULE_DESCRIPTION("Universal power supply monitor class");
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>, "
+              "Szabolcs Gyurko, "
+              "Anton Vorontsov <cbou@mail.ru>");
+MODULE_LICENSE("GPL");
Index: linux-2.6.22/drivers/power/power_supply.h
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.22/drivers/power/power_supply.h	2007-08-23 12:13:52.000000000 +0200
@@ -0,0 +1,42 @@
+/*
+ *  Functions private to power supply class
+ *
+ *  Copyright (c) 2007  Anton Vorontsov <cbou@mail.ru>
+ *  Copyright (c) 2004  Szabolcs Gyurko
+ *  Copyright (c) 2003  Ian Molton <spyro@f2s.com>
+ *
+ *  Modified: 2004, Oct     Szabolcs Gyurko
+ *
+ *  You may use this code as per GPL version 2
+ */
+
+#ifdef CONFIG_SYSFS
+
+extern int power_supply_create_attrs(struct power_supply *psy);
+extern void power_supply_remove_attrs(struct power_supply *psy);
+extern int power_supply_uevent(struct device *dev, char **envp, int num_envp,
+                               char *buffer, int buffer_size);
+
+#else
+
+static inline int power_supply_create_attrs(struct power_supply *psy)
+{ return 0; }
+static inline void power_supply_remove_attrs(struct power_supply *psy) {}
+#define power_supply_uevent NULL
+
+#endif /* CONFIG_SYSFS */
+
+#ifdef CONFIG_LEDS_TRIGGERS
+
+extern void power_supply_update_leds(struct power_supply *psy);
+extern int power_supply_create_triggers(struct power_supply *psy);
+extern void power_supply_remove_triggers(struct power_supply *psy);
+
+#else
+
+static inline void power_supply_update_leds(struct power_supply *psy) {}
+static inline int power_supply_create_triggers(struct power_supply *psy)
+{ return 0; }
+static inline void power_supply_remove_triggers(struct power_supply *psy) {}
+
+#endif /* CONFIG_LEDS_TRIGGERS */
Index: linux-2.6.22/drivers/power/power_supply_leds.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.22/drivers/power/power_supply_leds.c	2007-08-23 12:13:52.000000000 +0200
@@ -0,0 +1,188 @@
+/*
+ *  LEDs triggers for power supply class
+ *
+ *  Copyright (c) 2007  Anton Vorontsov <cbou@mail.ru>
+ *  Copyright (c) 2004  Szabolcs Gyurko
+ *  Copyright (c) 2003  Ian Molton <spyro@f2s.com>
+ *
+ *  Modified: 2004, Oct     Szabolcs Gyurko
+ *
+ *  You may use this code as per GPL version 2
+ */
+
+#include <linux/power_supply.h>
+
+/* If we have hwtimer trigger, then use it to blink charging LED */
+
+#if defined(CONFIG_LEDS_TRIGGER_HWTIMER) ||                  \
+               (defined(CONFIG_BATTERY_MODULE) &&            \
+                defined(CONFIG_LEDS_TRIGGER_HWTIMER_MODULE))
+       #define led_trigger_register_charging led_trigger_register_hwtimer
+       #define led_trigger_unregister_charging led_trigger_unregister_hwtimer
+#else
+       #define led_trigger_register_charging led_trigger_register_simple
+       #define led_trigger_unregister_charging led_trigger_unregister_simple
+#endif
+
+/* Battery specific LEDs triggers. */
+
+static void power_supply_update_bat_leds(struct power_supply *psy)
+{
+	union power_supply_propval status;
+
+	if (psy->get_property(psy, POWER_SUPPLY_PROP_STATUS, &status))
+		return;
+
+	dev_dbg(psy->dev, "%s %d\n", __FUNCTION__, status.intval);
+
+	switch(status.intval) {
+	case POWER_SUPPLY_STATUS_FULL:
+		led_trigger_event(psy->charging_full_trig, LED_FULL);
+		led_trigger_event(psy->charging_trig, LED_OFF);
+		led_trigger_event(psy->full_trig, LED_FULL);
+		break;
+	case POWER_SUPPLY_STATUS_CHARGING:
+		led_trigger_event(psy->charging_full_trig, LED_FULL);
+		led_trigger_event(psy->charging_trig, LED_FULL);
+		led_trigger_event(psy->full_trig, LED_OFF);
+		break;
+	default:
+		led_trigger_event(psy->charging_full_trig, LED_OFF);
+		led_trigger_event(psy->charging_trig, LED_OFF);
+		led_trigger_event(psy->full_trig, LED_OFF);
+		break;
+	}
+
+	return;
+}
+
+static int power_supply_create_bat_triggers(struct power_supply *psy)
+{
+	int rc = 0;
+
+	psy->charging_full_trig_name = kmalloc(strlen(psy->name) +
+	                          sizeof("-charging-or-full"), GFP_KERNEL);
+	if (!psy->charging_full_trig_name)
+		goto charging_full_failed;
+
+	psy->charging_trig_name = kmalloc(strlen(psy->name) +
+	                                  sizeof("-charging"), GFP_KERNEL);
+	if (!psy->charging_trig_name)
+		goto charging_failed;
+
+	psy->full_trig_name = kmalloc(strlen(psy->name) +
+	                              sizeof("-full"), GFP_KERNEL);
+	if (!psy->full_trig_name)
+		goto full_failed;
+
+	strcpy(psy->charging_full_trig_name, psy->name);
+	strcat(psy->charging_full_trig_name, "-charging-or-full");
+	strcpy(psy->charging_trig_name, psy->name);
+	strcat(psy->charging_trig_name, "-charging");
+	strcpy(psy->full_trig_name, psy->name);
+	strcat(psy->full_trig_name, "-full");
+
+	led_trigger_register_simple(psy->charging_full_trig_name,
+	                            &psy->charging_full_trig);
+	led_trigger_register_charging(psy->charging_trig_name,
+	                              &psy->charging_trig);
+	led_trigger_register_simple(psy->full_trig_name,
+	                            &psy->full_trig);
+
+	goto success;
+
+full_failed:
+	kfree(psy->charging_trig_name);
+charging_failed:
+	kfree(psy->charging_full_trig_name);
+charging_full_failed:
+	rc = -ENOMEM;
+success:
+	return rc;
+}
+
+static void power_supply_remove_bat_triggers(struct power_supply *psy)
+{
+	led_trigger_unregister_simple(psy->charging_full_trig);
+	led_trigger_unregister_charging(psy->charging_trig);
+	led_trigger_unregister_simple(psy->full_trig);
+	kfree(psy->full_trig_name);
+	kfree(psy->charging_trig_name);
+	kfree(psy->charging_full_trig_name);
+	return;
+}
+
+/* Generated power specific LEDs triggers. */
+
+static void power_supply_update_gen_leds(struct power_supply *psy)
+{
+	union power_supply_propval online;
+
+	if (psy->get_property(psy, POWER_SUPPLY_PROP_ONLINE, &online))
+		return;
+
+	dev_dbg(psy->dev, "%s %d\n", __FUNCTION__, online.intval);
+
+	if (online.intval)
+		led_trigger_event(psy->online_trig, LED_FULL);
+	else
+		led_trigger_event(psy->online_trig, LED_OFF);
+
+	return;
+}
+
+static int power_supply_create_gen_triggers(struct power_supply *psy)
+{
+	int rc = 0;
+
+	psy->online_trig_name = kmalloc(strlen(psy->name) + sizeof("-online"),
+	                                GFP_KERNEL);
+	if (!psy->online_trig_name)
+		goto online_failed;
+
+	strcpy(psy->online_trig_name, psy->name);
+	strcat(psy->online_trig_name, "-online");
+
+	led_trigger_register_simple(psy->online_trig_name, &psy->online_trig);
+
+	goto success;
+
+online_failed:
+	rc = -ENOMEM;
+success:
+	return rc;
+}
+
+static void power_supply_remove_gen_triggers(struct power_supply *psy)
+{
+	led_trigger_unregister_simple(psy->online_trig);
+	kfree(psy->online_trig_name);
+	return;
+}
+
+/* Choice what triggers to create&update. */
+
+void power_supply_update_leds(struct power_supply *psy)
+{
+	if (psy->type == POWER_SUPPLY_TYPE_BATTERY)
+		power_supply_update_bat_leds(psy);
+	else
+		power_supply_update_gen_leds(psy);
+	return;
+}
+
+int power_supply_create_triggers(struct power_supply *psy)
+{
+	if (psy->type == POWER_SUPPLY_TYPE_BATTERY)
+		return power_supply_create_bat_triggers(psy);
+	return power_supply_create_gen_triggers(psy);
+}
+
+void power_supply_remove_triggers(struct power_supply *psy)
+{
+	if (psy->type == POWER_SUPPLY_TYPE_BATTERY)
+		power_supply_remove_bat_triggers(psy);
+	else
+		power_supply_remove_gen_triggers(psy);
+	return;
+}
Index: linux-2.6.22/drivers/power/power_supply_sysfs.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.22/drivers/power/power_supply_sysfs.c	2007-08-23 12:13:52.000000000 +0200
@@ -0,0 +1,289 @@
+/*
+ *  Sysfs interface for the universal power supply monitor class
+ *
+ *  Copyright ©  2007  David Woodhouse <dwmw2@infradead.org>
+ *  Copyright (c) 2007  Anton Vorontsov <cbou@mail.ru>
+ *  Copyright (c) 2004  Szabolcs Gyurko
+ *  Copyright (c) 2003  Ian Molton <spyro@f2s.com>
+ *
+ *  Modified: 2004, Oct     Szabolcs Gyurko
+ *
+ *  You may use this code as per GPL version 2
+ */
+
+#include <linux/ctype.h>
+#include <linux/power_supply.h>
+
+/*
+ * This is because the name "current" breaks the device attr macro.
+ * The "current" word resolvs to "(get_current())" so instead of
+ * "current" "(get_current())" appears in the sysfs.
+ *
+ * The source of this definition is the device.h which calls __ATTR
+ * macro in sysfs.h which calls the __stringify macro.
+ *
+ * Only modification that the name is not tried to be resolved
+ * (as a macro let's say).
+ */
+
+#define POWER_SUPPLY_ATTR(_name)                                        \
+{                                                                       \
+	.attr = { .name = #_name, .mode = 0444, .owner = THIS_MODULE }, \
+	.show = power_supply_show_property,                             \
+	.store = NULL,                                                  \
+}
+
+static struct device_attribute power_supply_attrs[];
+
+static ssize_t power_supply_show_property(struct device *dev,
+                                          struct device_attribute *attr,
+                                          char *buf) {
+	static char *status_text[] = {
+		"Unknown", "Charging", "Discharging", "Not charging", "Full"
+	};
+	static char *health_text[] = {
+		"Unknown", "Good", "Overheat", "Dead"
+	};
+	static char *technology_text[] = {
+		"Unknown", "NiMH", "Li-ion", "Li-poly"
+	};
+	static char *capacity_level_text[] = {
+		"Unknown", "Critical", "Low", "Normal", "High", "Full"
+	};
+	ssize_t ret;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	const ptrdiff_t off = attr - power_supply_attrs;
+	union power_supply_propval value;
+
+	ret = psy->get_property(psy, off, &value);
+
+	if (ret < 0) {
+		dev_err(dev, "driver failed to report `%s' property\n",
+		        attr->attr.name);
+		return ret;
+	}
+
+	if (off == POWER_SUPPLY_PROP_STATUS)
+		return sprintf(buf, "%s\n", status_text[value.intval]);
+	else if (off == POWER_SUPPLY_PROP_HEALTH)
+		return sprintf(buf, "%s\n", health_text[value.intval]);
+	else if (off == POWER_SUPPLY_PROP_TECHNOLOGY)
+		return sprintf(buf, "%s\n", technology_text[value.intval]);
+	else if (off == POWER_SUPPLY_PROP_CAPACITY_LEVEL)
+		return sprintf(buf, "%s\n",
+		               capacity_level_text[value.intval]);
+	else if (off == POWER_SUPPLY_PROP_MODEL_NAME)
+		return sprintf(buf, "%s\n", value.strval);
+
+	return sprintf(buf, "%d\n", value.intval);
+}
+
+/* Must be in the same order as POWER_SUPPLY_PROP_* */
+static struct device_attribute power_supply_attrs[] = {
+	/* Properties of type `int' */
+	POWER_SUPPLY_ATTR(status),
+	POWER_SUPPLY_ATTR(health),
+	POWER_SUPPLY_ATTR(present),
+	POWER_SUPPLY_ATTR(online),
+	POWER_SUPPLY_ATTR(technology),
+	POWER_SUPPLY_ATTR(voltage_max_design),
+	POWER_SUPPLY_ATTR(voltage_min_design),
+	POWER_SUPPLY_ATTR(voltage_now),
+	POWER_SUPPLY_ATTR(voltage_avg),
+	POWER_SUPPLY_ATTR(current_now),
+	POWER_SUPPLY_ATTR(current_avg),
+	POWER_SUPPLY_ATTR(charge_full_design),
+	POWER_SUPPLY_ATTR(charge_empty_design),
+	POWER_SUPPLY_ATTR(charge_full),
+	POWER_SUPPLY_ATTR(charge_empty),
+	POWER_SUPPLY_ATTR(charge_now),
+	POWER_SUPPLY_ATTR(charge_avg),
+	POWER_SUPPLY_ATTR(energy_full_design),
+	POWER_SUPPLY_ATTR(energy_empty_design),
+	POWER_SUPPLY_ATTR(energy_full),
+	POWER_SUPPLY_ATTR(energy_empty),
+	POWER_SUPPLY_ATTR(energy_now),
+	POWER_SUPPLY_ATTR(energy_avg),
+	POWER_SUPPLY_ATTR(capacity),
+	POWER_SUPPLY_ATTR(capacity_level),
+	POWER_SUPPLY_ATTR(temp),
+	POWER_SUPPLY_ATTR(temp_ambient),
+	POWER_SUPPLY_ATTR(time_to_empty_now),
+	POWER_SUPPLY_ATTR(time_to_empty_avg),
+	POWER_SUPPLY_ATTR(time_to_full_now),
+	POWER_SUPPLY_ATTR(time_to_full_avg),
+	/* Properties of type `const char *' */
+	POWER_SUPPLY_ATTR(model_name),
+};
+
+static ssize_t power_supply_show_static_attrs(struct device *dev,
+                                              struct device_attribute *attr,
+                                              char *buf) {
+	static char *type_text[] = { "Battery", "UPS", "Mains", "USB" };
+	struct power_supply *psy = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", type_text[psy->type]);
+}
+
+static struct device_attribute power_supply_static_attrs[] = {
+	__ATTR(type, 0444, power_supply_show_static_attrs, NULL),
+};
+
+int power_supply_create_attrs(struct power_supply *psy)
+{
+	int rc = 0;
+	int i, j;
+
+	for (i = 0; i < ARRAY_SIZE(power_supply_static_attrs); i++) {
+		rc = device_create_file(psy->dev,
+		            &power_supply_static_attrs[i]);
+		if (rc)
+			goto statics_failed;
+	}
+
+	for (j = 0; j < psy->num_properties; j++) {
+		rc = device_create_file(psy->dev,
+		            &power_supply_attrs[psy->properties[j]]);
+		if (rc)
+			goto dynamics_failed;
+	}
+
+	goto succeed;
+
+dynamics_failed:
+	while (j--)
+		device_remove_file(psy->dev,
+		           &power_supply_attrs[psy->properties[j]]);
+statics_failed:
+	while (i--)
+		device_remove_file(psy->dev,
+		           &power_supply_static_attrs[psy->properties[i]]);
+succeed:
+	return rc;
+}
+
+void power_supply_remove_attrs(struct power_supply *psy)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(power_supply_static_attrs); i++)
+		device_remove_file(psy->dev,
+		            &power_supply_static_attrs[i]);
+
+	for (i = 0; i < psy->num_properties; i++)
+		device_remove_file(psy->dev,
+		            &power_supply_attrs[psy->properties[i]]);
+
+	return;
+}
+
+static char *kstruprdup(const char *str, gfp_t gfp)
+{
+	char *ret, *ustr;
+
+	ustr = ret = kmalloc(strlen(str) + 1, gfp);
+
+	if (!ret)
+		return NULL;
+
+	while (*str)
+		*ustr++ = toupper(*str++);
+
+	*ustr = 0;
+
+	return ret;
+}
+
+int power_supply_uevent(struct device *dev, char **envp, int num_envp,
+                        char *buffer, int buffer_size)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	int i = 0, length = 0, ret = 0, j;
+	char *prop_buf;
+	char *attrname;
+
+	dev_dbg(dev, "uevent\n");
+
+	if (!psy) {
+		dev_dbg(dev, "No power supply yet\n");
+		return ret;
+	}
+
+	dev_dbg(dev, "POWER_SUPPLY_NAME=%s\n", psy->name);
+
+	ret = add_uevent_var(envp, num_envp, &i, buffer, buffer_size,
+	                     &length, "POWER_SUPPLY_NAME=%s", psy->name);
+	if (ret)
+		return ret;
+
+	prop_buf = (char *)get_zeroed_page(GFP_KERNEL);
+	if (!prop_buf)
+		return -ENOMEM;
+
+	for (j = 0; j < ARRAY_SIZE(power_supply_static_attrs); j++) {
+		struct device_attribute *attr;
+		char *line;
+
+		attr = &power_supply_static_attrs[j];
+
+		ret = power_supply_show_static_attrs(dev, attr, prop_buf);
+		if (ret < 0)
+			goto out;
+
+		line = strchr(prop_buf, '\n');
+		if (line)
+			*line = 0;
+
+		attrname = kstruprdup(attr->attr.name, GFP_KERNEL);
+		if (!attrname) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		dev_dbg(dev, "Static prop %s=%s\n", attrname, prop_buf);
+
+		ret = add_uevent_var(envp, num_envp, &i, buffer, buffer_size,
+		                     &length, "POWER_SUPPLY_%s=%s",
+		                     attrname, prop_buf);
+		kfree(attrname);
+		if (ret)
+			goto out;
+	}
+
+	dev_dbg(dev, "%zd dynamic props\n", psy->num_properties);
+
+	for (j = 0; j < psy->num_properties; j++) {
+		struct device_attribute *attr;
+		char *line;
+
+		attr = &power_supply_attrs[psy->properties[j]];
+
+		ret = power_supply_show_property(dev, attr, prop_buf);
+		if (ret < 0)
+			goto out;
+
+		line = strchr(prop_buf, '\n');
+		if (line)
+			*line = 0;
+
+		attrname = kstruprdup(attr->attr.name, GFP_KERNEL);
+		if (!attrname) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		dev_dbg(dev, "prop %s=%s\n", attrname, prop_buf);
+
+		ret = add_uevent_var(envp, num_envp, &i, buffer, buffer_size,
+		                     &length, "POWER_SUPPLY_%s=%s",
+		                     attrname, prop_buf);
+		kfree(attrname);
+		if (ret)
+			goto out;
+	}
+
+out:
+	free_page((unsigned long)prop_buf);
+
+	return ret;
+}
Index: linux-2.6.22/drivers/power/simpad-battery.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.22/drivers/power/simpad-battery.c	2007-08-23 12:13:52.000000000 +0200
@@ -0,0 +1,242 @@
+/*
+ *  linux/drivers/misc/simpad-battery.c
+ *
+ *  Copyright (C) 2005 Holger Hans Peter Freyther
+ *  Copyright (C) 2001 Juergen Messerer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * Read the Battery Level through the UCB1x00 chip. T-Sinuspad is
+ * unsupported for now.
+ *
+ */
+
+#include <linux/battery.h>
+#include <asm/dma.h>
+#include "ucb1x00.h"
+
+
+/*
+ * Conversion from AD -> mV
+ * 7.5V = 1023   7.3313mV/Digit
+ *
+ * 400 Units == 9.7V
+ * a     = ADC value
+ * 21    = ADC error
+ * 12600 = Divident to get 2*7.3242
+ * 860   = Divider to get 2*7.3242
+ * 170   = Voltagedrop over
+ */
+#define CALIBRATE_BATTERY(a)   ((((a + 21)*12600)/860) + 170)
+
+/*
+ * We have two types of batteries a small and a large one
+ * To get the right value we to distinguish between those two
+ * 450 Units == 15 V
+ */
+#define CALIBRATE_SUPPLY(a)   (((a) * 1500) / 45)
+#define MIN_SUPPLY            12000 /* Less then 12V means no powersupply */
+
+/*
+ * Charging Current
+ * if value is >= 50 then charging is on
+ */
+#define CALIBRATE_CHARGING(a)    (((a)* 1000)/(152/4)))
+
+struct simpad_battery_t {
+	struct battery  battery;
+	struct ucb1x00* ucb;
+
+        /*
+	 * Variables for the values to one time support
+	 * T-Sinuspad as well
+	 */
+	int min_voltage;
+	int min_current;
+	int min_charge;
+
+	int max_voltage;
+	int max_current;
+	int max_charge;
+
+	int min_supply;
+	int charging_led_label;
+	int charging_max_label;
+	int batt_full;
+	int batt_low;
+	int batt_critical;
+	int batt_empty;
+};
+
+static int simpad_get_min_voltage(struct battery* _battery )
+{
+	struct simpad_battery_t* battery = (struct simpad_battery_t*)_battery;
+	return  battery->min_voltage;
+}
+
+static int simpad_get_min_current(struct battery* _battery)
+{
+	struct simpad_battery_t* battery = (struct simpad_battery_t*)_battery;
+	return battery->min_current;
+}
+
+static int simpad_get_min_charge(struct battery* _battery)
+{
+	struct simpad_battery_t* battery = (struct simpad_battery_t*)_battery;
+	return battery->min_charge;
+}
+
+static int simpad_get_max_voltage(struct battery* _battery)
+{
+	struct simpad_battery_t* battery = (struct simpad_battery_t*)_battery;
+	return battery->max_voltage;
+}
+
+static int simpad_get_max_current(struct battery* _battery)
+{
+	struct simpad_battery_t* battery = (struct simpad_battery_t*)_battery;
+	return battery->max_current;
+}
+
+static int simpad_get_max_charge(struct battery* _battery)
+{
+	struct simpad_battery_t* battery = (struct simpad_battery_t*)_battery;
+	return battery->max_charge;
+}
+
+static int simpad_get_temp(struct battery* _battery)
+{
+	return 0;
+}
+
+static int simpad_get_voltage(struct battery* _battery)
+{
+	int val;
+	struct simpad_battery_t* battery = (struct simpad_battery_t*)_battery;
+
+
+	ucb1x00_adc_enable(battery->ucb);
+	val = ucb1x00_adc_read(battery->ucb, UCB_ADC_INP_AD1, UCB_NOSYNC);
+	ucb1x00_adc_disable(battery->ucb);
+
+	return CALIBRATE_BATTERY(val);
+}
+
+static int simpad_get_current(struct battery* _battery)
+{
+	int val;
+	struct simpad_battery_t* battery = (struct simpad_battery_t*)_battery;
+
+	ucb1x00_adc_enable(battery->ucb);
+	val = ucb1x00_adc_read(battery->ucb, UCB_ADC_INP_AD3, UCB_NOSYNC);
+	ucb1x00_adc_disable(battery->ucb);
+
+	return val;
+}
+
+static int simpad_get_charge(struct battery* _battery)
+{
+	int val;
+	struct simpad_battery_t* battery = (struct simpad_battery_t*)_battery;
+
+	ucb1x00_adc_enable(battery->ucb);
+	val = ucb1x00_adc_read(battery->ucb, UCB_ADC_INP_AD2, UCB_NOSYNC);
+	ucb1x00_adc_disable(battery->ucb);
+
+	return CALIBRATE_SUPPLY(val);
+
+}
+
+static int simpad_get_status(struct battery* _battery)
+{
+	struct simpad_battery_t* battery = (struct simpad_battery_t*)(_battery);
+	int vcharger = simpad_get_voltage(_battery);
+	int icharger = simpad_get_current(_battery);
+
+	int status = BATTERY_STATUS_UNKNOWN;
+	if(icharger > battery->charging_led_label)
+		status = BATTERY_STATUS_CHARGING;
+	else if(vcharger > battery->min_supply)
+		status = BATTERY_STATUS_NOT_CHARGING;
+	else
+		status = BATTERY_STATUS_DISCHARGING;
+
+	return status;
+}
+
+static struct simpad_battery_t simpad_battery  = {
+	.battery = {
+		.get_min_voltage = simpad_get_min_voltage,
+		.get_min_current = simpad_get_min_current,
+		.get_min_charge  = simpad_get_min_charge,
+		.get_max_voltage = simpad_get_max_voltage,
+		.get_max_current = simpad_get_max_current,
+		.get_max_charge  = simpad_get_max_charge,
+		.get_temp        = simpad_get_temp,
+		.get_voltage     = simpad_get_voltage,
+		.get_current     = simpad_get_current,
+		.get_charge      = simpad_get_charge,
+		.get_status      = simpad_get_status,
+	},
+	.min_voltage = 0,
+	.min_current = 0,
+	.min_charge  = 0,
+	.max_voltage = 0,
+	.max_current = 0,
+	.max_charge  = 0,
+
+	.min_supply         = 1200,
+	.charging_led_label = 18,
+	.charging_max_label = 265,
+	.batt_full          = 8300,
+	.batt_low           = 7300,
+	.batt_critical      = 6800,
+	.batt_empty         = 6500,
+};
+
+
+
+/*
+ * UCB glue code
+ */
+static int ucb1x00_battery_add(struct class_device *dev)
+{
+	struct ucb1x00 *ucb = classdev_to_ucb1x00(dev);
+	simpad_battery.ucb  = ucb;
+
+	battery_class_register(&simpad_battery.battery);
+
+	return 0;
+}
+
+static void ucb1x00_battery_remove(struct class_device *dev)
+{
+	return battery_class_unregister(&simpad_battery.battery);
+}
+
+
+static struct ucb1x00_class_interface ucb1x00_battery_interface = {
+	.interface   = {
+		.add    = ucb1x00_battery_add,
+		.remove = ucb1x00_battery_remove,
+	},
+};
+
+
+static int __init battery_register(void)
+{
+	return ucb1x00_register_interface(&ucb1x00_battery_interface);
+}
+
+static void __exit battery_unregister(void)
+{
+	ucb1x00_unregister_interface(&ucb1x00_battery_interface);
+}
+
+module_init(battery_register);
+module_exit(battery_unregister);
+
+MODULE_AUTHOR("Holger Hans Peter Freyther");
+MODULE_LICENSE("GPL");
Index: linux-2.6.22/arch/arm/Kconfig
===================================================================
--- linux-2.6.22.orig/arch/arm/Kconfig	2007-08-23 12:17:42.000000000 +0200
+++ linux-2.6.22/arch/arm/Kconfig	2007-08-23 12:22:28.000000000 +0200
@@ -1016,6 +1016,8 @@
 
 source "drivers/w1/Kconfig"
 
+source "drivers/power/Kconfig"
+
 source "drivers/hwmon/Kconfig"
 
 #source "drivers/l3/Kconfig"
Index: linux-2.6.22/drivers/Kconfig
===================================================================
--- linux-2.6.22.orig/drivers/Kconfig	2007-08-23 12:21:27.000000000 +0200
+++ linux-2.6.22/drivers/Kconfig	2007-08-23 12:22:03.000000000 +0200
@@ -54,6 +54,8 @@
 
 source "drivers/w1/Kconfig"
 
+source "drivers/power/Kconfig"
+
 source "drivers/hwmon/Kconfig"
 
 source "drivers/mfd/Kconfig"
Index: linux-2.6.22/drivers/Makefile
===================================================================
--- linux-2.6.22.orig/drivers/Makefile	2007-08-23 12:33:58.000000000 +0200
+++ linux-2.6.22/drivers/Makefile	2007-08-23 12:34:34.000000000 +0200
@@ -61,6 +61,7 @@
 obj-$(CONFIG_RTC_LIB)		+= rtc/
 obj-y				+= i2c/
 obj-$(CONFIG_W1)		+= w1/
+obj-$(CONFIG_POWER_SUPPLY)	+= power/
 obj-$(CONFIG_HWMON)		+= hwmon/
 obj-$(CONFIG_PHONE)		+= telephony/
 obj-$(CONFIG_MD)		+= md/
Index: linux-2.6.22/include/linux/power_supply.h
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.22/include/linux/power_supply.h	2007-08-23 12:37:10.000000000 +0200
@@ -0,0 +1,175 @@
+/*
+ *  Universal power supply monitor class
+ *
+ *  Copyright (c) 2007  Anton Vorontsov <cbou@mail.ru>
+ *  Copyright (c) 2004  Szabolcs Gyurko
+ *  Copyright (c) 2003  Ian Molton <spyro@f2s.com>
+ *
+ *  Modified: 2004, Oct     Szabolcs Gyurko
+ *
+ *  You may use this code as per GPL version 2
+ */
+
+#ifndef __LINUX_POWER_SUPPLY_H__
+#define __LINUX_POWER_SUPPLY_H__
+
+#include <linux/device.h>
+#include <linux/workqueue.h>
+#include <linux/leds.h>
+
+/*
+ * All voltages, currents, charges, energies, time and temperatures in uV,
+ * uA, uAh, uWh, seconds and tenths of degree Celsius unless otherwise
+ * stated. It's driver's job to convert its raw values to units in which
+ * this class operates.
+ */
+
+/*
+ * For systems where the charger determines the maximum battery capacity
+ * the min and max fields should be used to present these values to user
+ * space. Unused/unknown fields will not appear in sysfs.
+ */
+
+enum {
+	POWER_SUPPLY_STATUS_UNKNOWN = 0,
+	POWER_SUPPLY_STATUS_CHARGING,
+	POWER_SUPPLY_STATUS_DISCHARGING,
+	POWER_SUPPLY_STATUS_NOT_CHARGING,
+	POWER_SUPPLY_STATUS_FULL,
+};
+
+enum {
+	POWER_SUPPLY_HEALTH_UNKNOWN = 0,
+	POWER_SUPPLY_HEALTH_GOOD,
+	POWER_SUPPLY_HEALTH_OVERHEAT,
+	POWER_SUPPLY_HEALTH_DEAD,
+};
+
+enum {
+	POWER_SUPPLY_TECHNOLOGY_UNKNOWN = 0,
+	POWER_SUPPLY_TECHNOLOGY_NIMH,
+	POWER_SUPPLY_TECHNOLOGY_LION,
+	POWER_SUPPLY_TECHNOLOGY_LIPO,
+};
+
+enum {
+	POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN = 0,
+	POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL,
+	POWER_SUPPLY_CAPACITY_LEVEL_LOW,
+	POWER_SUPPLY_CAPACITY_LEVEL_NORMAL,
+	POWER_SUPPLY_CAPACITY_LEVEL_HIGH,
+	POWER_SUPPLY_CAPACITY_LEVEL_FULL,
+};
+
+enum power_supply_property {
+	/* Properties of type `int' */
+	POWER_SUPPLY_PROP_STATUS = 0,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_EMPTY,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_AVG,
+	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
+	POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN,
+	POWER_SUPPLY_PROP_ENERGY_FULL,
+	POWER_SUPPLY_PROP_ENERGY_EMPTY,
+	POWER_SUPPLY_PROP_ENERGY_NOW,
+	POWER_SUPPLY_PROP_ENERGY_AVG,
+	POWER_SUPPLY_PROP_CAPACITY, /* in percents! */
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TEMP_AMBIENT,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
+	/* Properties of type `const char *' */
+	POWER_SUPPLY_PROP_MODEL_NAME,
+};
+
+enum power_supply_type {
+	POWER_SUPPLY_TYPE_BATTERY = 0,
+	POWER_SUPPLY_TYPE_UPS,
+	POWER_SUPPLY_TYPE_MAINS,
+	POWER_SUPPLY_TYPE_USB,
+};
+
+union power_supply_propval {
+	int intval;
+	const char *strval;
+};
+
+struct power_supply {
+	const char *name;
+	enum power_supply_type type;
+	enum power_supply_property *properties;
+	size_t num_properties;
+
+	char **supplied_to;
+	size_t num_supplicants;
+
+	int (*get_property)(struct power_supply *psy,
+	                    enum power_supply_property psp,
+	                    union power_supply_propval *val);
+	void (*external_power_changed)(struct power_supply *psy);
+
+	/* For APM emulation, think legacy userspace. */
+	int use_for_apm;
+
+	/* private */
+	struct device *dev;
+	struct work_struct changed_work;
+
+#ifdef CONFIG_LEDS_TRIGGERS
+	struct led_trigger *charging_full_trig;
+	char *charging_full_trig_name;
+	struct led_trigger *charging_trig;
+	char *charging_trig_name;
+	struct led_trigger *full_trig;
+	char *full_trig_name;
+	struct led_trigger *online_trig;
+	char *online_trig_name;
+#endif
+};
+
+/*
+ * This is recommended structure to specify static power supply parameters.
+ * Generic one, parametrizable for different power supplies. Power supply
+ * class itself does not use it, but that's what implementing most platform
+ * drivers, should try reuse for consistency.
+ */
+
+struct power_supply_info {
+	const char *name;
+	int technology;
+	int voltage_max_design;
+	int voltage_min_design;
+	int charge_full_design;
+	int charge_empty_design;
+	int energy_full_design;
+	int energy_empty_design;
+	int use_for_apm;
+};
+
+extern void power_supply_changed(struct power_supply *psy);
+extern int power_supply_am_i_supplied(struct power_supply *psy);
+
+extern int power_supply_register(struct device *parent,
+                                 struct power_supply *psy);
+extern void power_supply_unregister(struct power_supply *psy);
+
+/* For APM emulation, think legacy userspace. */
+extern struct class *power_supply_class;
+
+#endif /* __LINUX_POWER_SUPPLY_H__ */