path: root/documentation/sdk-manual/sdk-working-projects.xml

<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
[<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] >

<chapter id='sdk-working-projects'>

    <title>Using the SDK Toolchain Directly</title>

    <para>
        You can use the SDK toolchain directly with Makefile,
        Autotools, and <trademark class='trade'>Eclipse</trademark> based
        projects.
        This chapter covers information specific to each of these types of
        projects.
    </para>

    <section id='autotools-based-projects'>
        <title>Autotools-Based Projects</title>

        <para>
            Once you have a suitable cross-toolchain installed, it is very easy
            to develop a project outside of the OpenEmbedded build system.
            This section presents a simple "Helloworld" example that shows how
            to set up, compile, and run the project.
        </para>

        <section id='creating-and-running-a-project-based-on-gnu-autotools'>
            <title>Creating and Running a Project Based on GNU Autotools</title>

            <para>
                Follow these steps to create a simple Autotools-based project:
                <orderedlist>
                    <listitem><para>
                        <emphasis>Create your directory:</emphasis>
                        Create a clean directory for your project and then make
                        that directory your working location:
                        <literallayout class='monospaced'>
     $ mkdir $HOME/helloworld
     $ cd $HOME/helloworld
                        </literallayout>
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Populate the directory:</emphasis>
                        Create <filename>hello.c</filename>,
                        <filename>Makefile.am</filename>,
                        and <filename>configure.ac</filename> files as follows:
                        <itemizedlist>
                            <listitem><para>
                                For <filename>hello.c</filename>, include
                                these lines:
                                <literallayout class='monospaced'>
     #include &lt;stdio.h&gt;

     main()
        {
           printf("Hello World!\n");
        }
                                </literallayout>
                                </para></listitem>
                            <listitem><para>
                                For <filename>Makefile.am</filename>,
                                include these lines:
                                <literallayout class='monospaced'>
     bin_PROGRAMS = hello
     hello_SOURCES = hello.c
                                </literallayout>
                                </para></listitem>
                            <listitem><para>
                                For <filename>configure.in</filename>,
                                include these lines:
                                <literallayout class='monospaced'>
     AC_INIT(hello,0.1)
     AM_INIT_AUTOMAKE([foreign])
     AC_PROG_CC
     AC_PROG_INSTALL
     AC_OUTPUT(Makefile)
                                </literallayout>
                                </para></listitem>
                        </itemizedlist>
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Source the cross-toolchain
                        environment setup file:</emphasis>
                        As described earlier in the manual, installing the
                        cross-toolchain creates a cross-toolchain
                        environment setup script in the directory that the SDK
                        was installed.
                        Before you can use the tools to develop your project,
                        you must source this setup script.
                        The script begins with the string "environment-setup"
                        and contains the machine architecture, which is
                        followed by the string "poky-linux".
                        Here is an example that sources a script from the
                        default SDK installation directory that uses the
                        32-bit Intel x86 Architecture and the
                        &DISTRO_NAME; Yocto Project release:
                        <literallayout class='monospaced'>
     $ source /opt/poky/&DISTRO;/environment-setup-i586-poky-linux
                        </literallayout>
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Generate the local aclocal.m4
                        files and create the configure script:</emphasis>
                        The following GNU Autotools generate the local
                        <filename>aclocal.m4</filename> files and create the
                        configure script:
                        <literallayout class='monospaced'>
     $ aclocal
     $ autoconf
                        </literallayout>
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Generate files needed by GNU coding
                        standards:</emphasis>
                        GNU coding standards require certain files in order
                        for the project to be compliant.
                        This command creates those files:
                        <literallayout class='monospaced'>
     $ touch NEWS README AUTHORS ChangeLog
                        </literallayout>
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Generate the configure file:</emphasis>
                        This command generates the
                        <filename>configure</filename>:
                        <literallayout class='monospaced'>
     $ automake -a
                        </literallayout>
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Cross-compile the project:</emphasis>
                        This command compiles the project using the
                        cross-compiler.
                        The
                        <ulink url='&YOCTO_DOCS_REF_URL;#var-CONFIGURE_FLAGS'><filename>CONFIGURE_FLAGS</filename></ulink>
                        environment variable provides the minimal arguments for
                        GNU configure:
                        <literallayout class='monospaced'>
     $ ./configure ${CONFIGURE_FLAGS}
                        </literallayout>
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Make and install the project:</emphasis>
                        These two commands generate and install the project
                        into the destination directory:
                        <literallayout class='monospaced'>
     $ make
     $ make install DESTDIR=./tmp
                        </literallayout>
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Verify the installation:</emphasis>
                        This command is a simple way to verify the installation
                        of your project.
                        Running the command prints the architecture on which
                        the binary file can run.
                        This architecture should be the same architecture that
                        the installed cross-toolchain supports.
                        <literallayout class='monospaced'>
     $ file ./tmp/usr/local/bin/hello
                        </literallayout>
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Execute your project:</emphasis>
                        To execute the project in the shell, simply enter
                        the name.
                        You could also copy the binary to the actual target
                        hardware and run the project there as well:
                        <literallayout class='monospaced'>
     $ ./hello
                        </literallayout>
                        As expected, the project displays the "Hello World!"
                        message.
                        </para></listitem>
                </orderedlist>
            </para>
        </section>

        <section id='passing-host-options'>
            <title>Passing Host Options</title>

            <para>
                For an Autotools-based project, you can use the cross-toolchain
                by just passing the appropriate host option to
                <filename>configure.sh</filename>.
                The host option you use is derived from the name of the
                environment setup script found in the directory in which you
                installed the cross-toolchain.
                For example, the host option for an ARM-based target that uses
                the GNU EABI is <filename>armv5te-poky-linux-gnueabi</filename>.
                You will notice that the name of the script is
                <filename>environment-setup-armv5te-poky-linux-gnueabi</filename>.
                Thus, the following command works to update your project and
                rebuild it using the appropriate cross-toolchain tools:
                <literallayout class='monospaced'>
     $ ./configure --host=armv5te-poky-linux-gnueabi \
        --with-libtool-sysroot=<replaceable>sysroot_dir</replaceable>
                </literallayout>
                <note>
                    If the <filename>configure</filename> script results in
                    problems recognizing the
                    <filename>--with-libtool-sysroot=</filename><replaceable>sysroot-dir</replaceable>
                    option, regenerate the script to enable the support by
                    doing the following and then run the script again:
                    <literallayout class='monospaced'>
     $ libtoolize --automake
     $ aclocal -I ${OECORE_TARGET_SYSROOT}/usr/share/aclocal [-I <replaceable>dir_containing_your_project-specific_m4_macros</replaceable>]
     $ autoconf
     $ autoheader
     $ automake -a
                    </literallayout>
                </note>
            </para>
        </section>
    </section>

    <section id='makefile-based-projects'>
        <title>Makefile-Based Projects</title>

        <para>
            For Makefile-based projects, the cross-toolchain environment
            variables established by running the cross-toolchain environment
            setup script are subject to general <filename>make</filename>
            rules.
        </para>

        <para>
            To illustrate this, consider the following four cross-toolchain
            environment variables:
            <literallayout class='monospaced'>
     <ulink url='&YOCTO_DOCS_REF_URL;#var-CC'>CC</ulink>=i586-poky-linux-gcc -m32 -march=i586 --sysroot=/opt/poky/&DISTRO;/sysroots/i586-poky-linux
     <ulink url='&YOCTO_DOCS_REF_URL;#var-LD'>LD</ulink>=i586-poky-linux-ld --sysroot=/opt/poky/&DISTRO;/sysroots/i586-poky-linux
     <ulink url='&YOCTO_DOCS_REF_URL;#var-CFLAGS'>CFLAGS</ulink>=-O2 -pipe -g -feliminate-unused-debug-types
     <ulink url='&YOCTO_DOCS_REF_URL;#var-CXXFLAGS'>CXXFLAGS</ulink>=-O2 -pipe -g -feliminate-unused-debug-types
            </literallayout>
            Now, consider the following three cases:
            <itemizedlist>
                <listitem><para>
                    <emphasis>Case 1 - No Variables Set in the
                    <filename>Makefile</filename>:</emphasis>
                    Because these variables are not specifically set in the
                    <filename>Makefile</filename>, the variables retain their
                    values based on the environment.
                    </para></listitem>
                <listitem><para>
                    <emphasis>Case 2 - Variables Set in the
                    <filename>Makefile</filename>:</emphasis>
                    Specifically setting variables in the
                    <filename>Makefile</filename> during the build results in
                    the environment settings of the variables being
                    overwritten.
                    </para></listitem>
                <listitem><para>
                    <emphasis>Case 3 - Variables Set when the
                    <filename>Makefile</filename> is Executed from the
                    Command Line:</emphasis>
                    Executing the <filename>Makefile</filename> from the
                    command-line results in the variables being overwritten
                    with command-line content regardless of what is being set
                    in the <filename>Makefile</filename>.
                    In this case, environment variables are not considered
                    unless you use the "-e" flag during the build:
                    <literallayout class='monospaced'>
     $ make -e <replaceable>file</replaceable>
                    </literallayout>
                    If you use this flag, then the environment values of the
                    variables override any variables specifically set in the
                    <filename>Makefile</filename>.
                    </para></listitem>
            </itemizedlist>
            <note>
                For the list of variables set up by the cross-toolchain
                environment setup script, see the
                "<link linkend='sdk-running-the-sdk-environment-setup-script'>Running the SDK Environment Setup Script</link>"
                section.
            </note>
        </para>
    </section>

    <section id='sdk-developing-applications-using-eclipse'>
        <title>Developing Applications Using <trademark class='trade'>Eclipse</trademark></title>

        <para>
            If you are familiar with the popular Eclipse IDE, you can use an
            Eclipse Yocto Plug-in to allow you to develop, deploy, and test your
            application all from within Eclipse.
            This section describes general workflow using the SDK and Eclipse
            and how to configure and set up Eclipse.
        </para>

        <section id='workflow-using-eclipse'>
            <title>Workflow Using <trademark class='trade'>Eclipse</trademark></title>

            <para>
                The following figure and supporting list summarize the
                application development general workflow that employs both the
                SDK Eclipse.
            </para>

            <para>
                <imagedata fileref="figures/sdk-eclipse-dev-flow.png"
                    width="7in" depth="7in" align="center" scale="100" />
            </para>

            <para>
                <orderedlist>
                    <listitem><para>
                        <emphasis>Prepare the host system for the Yocto
                        Project</emphasis>:
                        See
                        "<ulink url='&YOCTO_DOCS_REF_URL;#detailed-supported-distros'>Supported Linux Distributions</ulink>"
                        and
                        "<ulink url='&YOCTO_DOCS_REF_URL;#required-packages-for-the-host-development-system'>Required Packages for the Host Development System</ulink>"
                        sections both in the Yocto Project Reference Manual for
                        requirements.
                        In particular, be sure your host system has the
                        <filename>xterm</filename> package installed.
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Secure the Yocto Project kernel target
                        image</emphasis>:
                        You must have a target kernel image that has been built
                        using the OpenEmbedded build system.</para>
                        <para>Depending on whether the Yocto Project has a
                        pre-built image that matches your target architecture
                        and where you are going to run the image while you
                        develop your application (QEMU or real hardware), the
                        area from which you get the image differs.
                        <itemizedlist>
                            <listitem><para>
                                Download the image from
                                <ulink url='&YOCTO_MACHINES_DL_URL;'><filename>machines</filename></ulink>
                                if your target architecture is supported and
                                you are going to develop and test your
                                application on actual hardware.
                                </para></listitem>
                            <listitem><para>
                                Download the image from
                                <ulink url='&YOCTO_QEMU_DL_URL;'>
                                <filename>machines/qemu</filename></ulink> if
                                your target architecture is supported and you
                                are going to develop and test your application
                                using the QEMU emulator.
                                </para></listitem>
                            <listitem><para>
                                Build your image if you cannot find a pre-built
                                image that matches your target architecture.
                                If your target architecture is similar to a
                                supported architecture, you can modify the
                                kernel image before you build it.
                                See the
                                "<ulink url='&YOCTO_DOCS_DEV_URL;#patching-the-kernel'>Patching the Kernel</ulink>"
                                section in the Yocto Project Development
                                manual for an example.
                                </para></listitem>
                        </itemizedlist>
                        </para></listitem>
                    <listitem>
                        <para><emphasis>Install the SDK</emphasis>:
                        The SDK provides a target-specific cross-development
                        toolchain, the root filesystem, the QEMU emulator, and
                        other tools that can help you develop your application.
                        For information on how to install the SDK, see the
                        "<link linkend='sdk-installing-the-sdk'>Installing the SDK</link>"
                        section.
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Secure the target root filesystem
                        and the Cross-development toolchain</emphasis>:
                        You need to find and download the appropriate root
                        filesystem and the cross-development toolchain.</para>
                        <para>You can find the tarballs for the root filesystem
                        in the same area used for the kernel image.
                        Depending on the type of image you are running, the
                        root filesystem you need differs.
                        For example, if you are developing an application that
                        runs on an image that supports Sato, you need to get a
                        root filesystem that supports Sato.</para>
                        <para>You can find the cross-development toolchains at
                        <ulink url='&YOCTO_TOOLCHAIN_DL_URL;'><filename>toolchains</filename></ulink>.
                        Be sure to get the correct toolchain for your
                        development host and your target architecture.
                        See the "<link linkend='sdk-locating-pre-built-sdk-installers'>Locating Pre-Built SDK Installers</link>"
                        section for information and the
                        "<link linkend='sdk-installing-the-sdk'>Installing the SDK</link>"
                        section for installation information.
                        <note>
                            As an alternative to downloading an SDK, you can
                            build the SDK installer.
                            For information on building the installer, see the
                            "<link linkend='sdk-building-an-sdk-installer'>Building an SDK Installer</link>"
                            section.
                            Another helpful resource for building an installer
                            is the
                            <ulink url='https://wiki.yoctoproject.org/wiki/TipsAndTricks/RunningEclipseAgainstBuiltImage'>Cookbook guide to Making an Eclipse Debug Capable Image</ulink>
                            wiki page.
                        </note>
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Create and build your application</emphasis>:
                        At this point, you need to have source files for your
                        application.
                        Once you have the files, you can use the Eclipse IDE
                        to import them and build the project.
                        If you are not using Eclipse, you need to use the
                        cross-development tools you have installed to create
                        the image.</para></listitem>
                    <listitem><para>
                        <emphasis>Deploy the image with the
                        application</emphasis>:
                        Using the Eclipse IDE, you can deploy your image to the
                        hardware or to QEMU through the project's preferences.
                        You can also use Eclipse to load and test your image
                        under QEMU.
                        See the
                        "<ulink url='&YOCTO_DOCS_DEV_URL;#dev-manual-qemu'>Using the Quick EMUlator (QEMU)</ulink>"
                        chapter in the Yocto Project Development Manual
                        for information on using QEMU.
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Test and debug the application</emphasis>:
                        Once your application is deployed, you need to test it.
                        Within the Eclipse IDE, you can use the debugging
                        environment along with supported performance enhancing
                        <ulink url='http://www.eclipse.org/linuxtools/'>Linux Tools</ulink>.
                        </para></listitem>
                </orderedlist>
            </para>
        </section>

        <section id='adt-eclipse'>
            <title>Working Within Eclipse</title>

            <para>
                The Eclipse IDE is a popular development environment and it
                fully supports development using the Yocto Project.
            </para>

            <para>
                When you install and configure the Eclipse Yocto Project
                Plug-in into the Eclipse IDE, you maximize your Yocto
                Project experience.
                Installing and configuring the Plug-in results in an
                environment that has extensions specifically designed to let
                you more easily develop software.
                These extensions allow for cross-compilation, deployment, and
                execution of your output into a QEMU emulation session as well
                as actual target hardware.
                You can also perform cross-debugging and profiling.
                The environment also supports performance enhancing
                <ulink url='http://www.eclipse.org/linuxtools/'>tools</ulink>
                that allow you to perform remote profiling, tracing,
                collection of power data, collection of latency data, and
                collection of performance data.
                <note>
                    This release of the Yocto Project supports both the Neon
                    and Mars versions of the Eclipse IDE.
                    This section provides information on how to use the Neon
                    release with the Yocto Project.
                    For information on how to use the Mars version of Eclipse
                    with the Yocto Project, see
                    "<link linkend='sdk-appendix-latest-yp-eclipse-plug-in'>Appendix C</link>.
                </note>
            </para>

            <section id='neon-setting-up-the-eclipse-ide'>
                <title>Setting Up the Neon Version of the Eclipse IDE</title>

                <para>
                    To develop within the Eclipse IDE, you need to do the
                    following:
                    <orderedlist>
                        <listitem><para>
                            Install the Neon version of the Eclipse IDE.
                            </para></listitem>
                        <listitem><para>
                            Configure the Eclipse IDE.
                            </para></listitem>
                        <listitem><para>
                            Install the Eclipse Yocto Plug-in.
                            </para></listitem>
                        <listitem><para>
                            Configure the Eclipse Yocto Plug-in.
                            </para></listitem>
                    </orderedlist>
                    <note>
                        Do not install Eclipse from your distribution's package
                        repository.
                        Be sure to install Eclipse from the official Eclipse
                        download site as directed in the next section.
                    </note>
                </para>

                <section id='neon-installing-eclipse-ide'>
                    <title>Installing the Neon Eclipse IDE</title>

                    <para>
                        Follow these steps to locate, install, and configure
                        Neon Eclipse:
                        <orderedlist>
                            <listitem><para>
                                <emphasis>Locate the Neon Download:</emphasis>
                                Open a browser and go to
                                <ulink url='http://www.eclipse.org/neon/'>http://www.eclipse.org/neon/</ulink>.
                                </para></listitem>
                            <listitem><para>
                                <emphasis>Download the Tarball:</emphasis>
                                Click through the "Download" buttons to
                                download the file.
                                </para></listitem>
                            <listitem><para>
                                <emphasis>Unpack the Tarball:</emphasis>
                                Move to a clean directory and unpack the
                                tarball.
                                Here is an example:
                                <literallayout class='monospaced'>
     $ cd ~
     $ tar -xzvf ~/Downloads/eclipse-inst-linux64.tar.gz
                                </literallayout>
                                Everything unpacks into a folder named
                                "eclipse-installer".
                                </para></listitem>
                            <listitem><para>
                                <emphasis>Launch the Installer:</emphasis>
                                Use the following commands to launch the
                                installer:
                                <literallayout class='monospaced'>
     $ cd ~/eclipse-installer
     $ ./eclipse-inst
                                </literallayout>
                                </para></listitem>
                            <listitem><para>
                                <emphasis>Select Your IDE:</emphasis>
                                From the list, select the "Eclipse IDE for
                                C/C++ Developers".
                                </para></listitem>
                            <listitem><para>
                                <emphasis>Install the Software:</emphasis>
                                Accept the default "cpp-neon" directory and
                                click "Install".
                                Accept any license agreements and approve any
                                certificates.
                                </para></listitem>
                            <listitem><para>
                                <emphasis>Launch Neon:</emphasis>
                                Click the "Launch" button and accept the
                                default "workspace".
                                </para></listitem>
                        </orderedlist>
                    </para>
                </section>

                <section id='neon-configuring-the-mars-eclipse-ide'>
                    <title>Configuring the Neon Eclipse IDE</title>

                    <para>
                        Follow these steps to configure the Neon Eclipse IDE.
                        <note>
                            Depending on how you installed Eclipse and what
                            you have already done, some of the options will
                            not appear.
                            If you cannot find an option as directed by the
                            manual, it has already been installed.
                        </note>
                        <orderedlist>
                            <listitem><para>
                                Be sure Eclipse is running and you are in your
                                workbench.
                                </para></listitem>
                            <listitem><para>
                                Select "Install New Software" from the "Help"
                                pull-down menu.
                                </para></listitem>
                            <listitem><para>
                                Select
                                "Neon - http://download.eclipse.org/releases/neon"
                                from the "Work with:" pull-down menu.
                                </para></listitem>
                            <listitem><para>
                                Expand the box next to "Linux Tools" and select
                                the following:
                                <literallayout class='monospaced'>
     C/C++ Remote (Over TCF/TE) Run/Debug Launcher
     TM Terminal
                                </literallayout>
                                </para></listitem>
                            <listitem><para>
                                Expand the box next to "Mobile and Device
                                Development" and select the following
                                boxes:
                                <literallayout class='monospaced'>
     C/C++ Remote (Over TCF/TE) Run/Debug Launcher
     Remote System Explorer User Actions
     TM Terminal
     TCF Remote System Explorer add-in
     TCF Target Explorer
                                </literallayout>
                                </para></listitem>
                            <listitem><para>
                                Expand the box next to "Programming Languages"
                                and select the following box:
                                <literallayout class='monospaced'>
     C/C++ Development Tools SDK
                                </literallayout>
                                </para></listitem>
                            <listitem><para>
                                Complete the installation by clicking through
                                appropriate "Next" and "Finish" buttons.
                                </para></listitem>
                        </orderedlist>
                    </para>
                </section>

                <section id='neon-installing-the-eclipse-yocto-plug-in'>
                    <title>Installing or Accessing the Neon Eclipse Yocto Plug-in</title>

                    <para>
                        You can install the Eclipse Yocto Plug-in into the
                        Eclipse IDE one of two ways:  use the Yocto Project's
                        Eclipse Update site to install the pre-built plug-in
                        or build and install the plug-in from the latest
                        source code.
                    </para>

                    <section id='neon-new-software'>
                        <title>Installing the Pre-built Plug-in from the Yocto Project Eclipse Update Site</title>

                        <para>
                            To install the Neon Eclipse Yocto Plug-in from the
                            update site, follow these steps:
                            <orderedlist>
                                <listitem><para>
                                    Start up the Eclipse IDE.
                                    </para></listitem>
                                <listitem><para>
                                    In Eclipse, select "Install New
                                    Software" from the "Help" menu.
                                    </para></listitem>
                                <listitem><para>
                                    Click "Add..." in the "Work with:" area.
                                    </para></listitem>
                                <listitem><para>
                                    Enter
                                    <filename>&ECLIPSE_DL_PLUGIN_URL;/neon</filename>
                                    in the URL field and provide a meaningful
                                    name in the "Name" field.
                                    </para></listitem>
                                <listitem><para>
                                    Click "OK" to have the entry added
                                    to the "Work with:" drop-down list.
                                    </para></listitem>
                                <listitem><para>
                                    Select the entry for the plug-in
                                    from the "Work with:" drop-down list.
                                    </para></listitem>
                                <listitem><para>
                                    Check the boxes next to the following:
                                    <literallayout class='monospaced'>
     Yocto Project SDK Plug-in
     Yocto Project Documentation plug-in
                                    </literallayout>
                                    </para></listitem>
                                <listitem><para>
                                    Complete the remaining software
                                    installation steps and then restart the
                                    Eclipse IDE to finish the installation of
                                    the plug-in.
                                    <note>
                                        You can click "OK" when prompted about
                                        installing software that contains
                                        unsigned content.
                                    </note>
                                    </para></listitem>
                            </orderedlist>
                        </para>
                    </section>

                    <section id='neon-zip-file-method'>
                        <title>Installing the Plug-in Using the Latest Source Code</title>

                        <para>
                            To install the Neon Eclipse Yocto Plug-in from the
                            latest source code, follow these steps:
                            <orderedlist>
                                <listitem><para>
                                    Be sure your development system
                                    has JDK 1.8+
                                    </para></listitem>
                                <listitem><para>
                                    Install X11-related packages:
                                    <literallayout class='monospaced'>
     $ sudo apt-get install xauth
                                    </literallayout>
                                    </para></listitem>
                                <listitem><para>
                                    In a new terminal shell, create a
                                    Git repository with:
                                    <literallayout class='monospaced'>
     $ cd ~
     $ git clone git://git.yoctoproject.org/eclipse-poky
                                    </literallayout>
                                    </para></listitem>
                                <listitem><para>
                                    Use Git to create the correct tag:
                                    <literallayout class='monospaced'>
     $ cd ~/eclipse-poky
     $ git checkout neon/yocto-&DISTRO;
                                    </literallayout>
                                    This creates a local tag named
                                    <filename>neon/yocto-&DISTRO;</filename>
                                    based on the branch
                                    <filename>origin/neon-master</filename>.
                                    You are put into a detached HEAD state,
                                    which is fine since you are only going to
                                    be building and not developing.
                                    </para></listitem>
                                <listitem><para>
                                    Change to the <filename>scripts</filename>
                                    directory within the Git repository:
                                    <literallayout class='monospaced'>
     $ cd scripts
                                    </literallayout>
                                    </para></listitem>
                                <listitem><para>
                                    Set up the local build environment
                                    by running the setup script:
                                    <literallayout class='monospaced'>
     $ ./setup.sh
                                    </literallayout>
                                    When the script finishes execution,
                                    it prompts you with instructions on how to
                                    run the <filename>build.sh</filename>
                                    script, which is also in the
                                    <filename>scripts</filename> directory of
                                    the Git repository created earlier.
                                    </para></listitem>
                                <listitem><para>
                                    Run the <filename>build.sh</filename>
                                    script as directed.
                                    Be sure to provide the tag name,
                                    documentation branch, and a release name.
                                    </para>
                                    <para>
                                    Following is an example:
                                    <literallayout class='monospaced'>
     $ ECLIPSE_HOME=/home/scottrif/eclipse-poky/scripts/eclipse ./build.sh -l neon/yocto-&DISTRO; master yocto-&DISTRO; 2>&amp;1 | tee build.log
                                    </literallayout>
                                    The previous example command adds the tag
                                    you need for
                                    <filename>mars/yocto-&DISTRO;</filename>
                                    to <filename>HEAD</filename>, then tells
                                    the build script to use the local (-l) Git
                                    checkout for the build.
                                    After running the script, the file
                                    <filename>org.yocto.sdk-</filename><replaceable>release</replaceable><filename>-</filename><replaceable>date</replaceable><filename>-archive.zip</filename>
                                    is in the current directory.
                                    </para></listitem>
                                <listitem><para>
                                    If necessary, start the Eclipse IDE
                                    and be sure you are in the Workbench.
                                    </para></listitem>
                                <listitem><para>
                                    Select "Install New Software" from
                                    the "Help" pull-down menu.
                                    </para></listitem>
                                <listitem><para>
                                    Click "Add".
                                    </para></listitem>
                                <listitem><para>
                                    Provide anything you want in the
                                    "Name" field.
                                    </para></listitem>
                                <listitem><para>
                                    Click "Archive" and browse to the
                                    ZIP file you built earlier.
                                    This ZIP file should not be "unzipped", and
                                    must be the
                                    <filename>*archive.zip</filename> file
                                    created by running the
                                    <filename>build.sh</filename> script.
                                    </para></listitem>
                                <listitem><para>
                                    Click the "OK" button.
                                    </para></listitem>
                                <listitem><para>
                                    Check the boxes that appear in
                                    the installation window to install the
                                    following:
                                    <literallayout class='monospaced'>
     Yocto Project SDK Plug-in
     Yocto Project Documentation plug-in
                                    </literallayout>
                                    </para></listitem>
                                <listitem><para>
                                    Finish the installation by clicking
                                    through the appropriate buttons.
                                    You can click "OK" when prompted about
                                    installing software that contains unsigned
                                    content.
                                    </para></listitem>
                                <listitem><para>
                                    Restart the Eclipse IDE if necessary.
                                    </para></listitem>
                            </orderedlist>
                        </para>

                        <para>
                            At this point you should be able to configure the
                            Eclipse Yocto Plug-in as described in the
                            "<link linkend='mars-configuring-the-eclipse-yocto-plug-in'>Configuring the Neon Eclipse Yocto Plug-in</link>"
                            section.
                        </para>
                    </section>
                </section>

                <section id='neon-configuring-the-eclipse-yocto-plug-in'>
                    <title>Configuring the Neon Eclipse Yocto Plug-in</title>

                    <para>
                        Configuring the Neon Eclipse Yocto Plug-in involves
                        setting the Cross Compiler options and the Target
                        options.
                        The configurations you choose become the default
                        settings for all projects.
                        You do have opportunities to change them later when
                        you configure the project (see the following section).
                    </para>

                    <para>
                        To start, you need to do the following from within the
                        Eclipse IDE:
                        <itemizedlist>
                            <listitem><para>
                                Choose "Preferences" from the "Window" menu to
                                display the Preferences Dialog.
                                </para></listitem>
                            <listitem><para>
                                Click "Yocto Project SDK" to display
                                the configuration screen.
                                </para></listitem>
                        </itemizedlist>
                        The following sub-sections describe how to configure
                        the plug-in.
                        <note>
                            Throughout the descriptions, a start-to-finish
                            example for preparing a QEMU image for use with
                            Eclipse is referenced as the "wiki" and is linked
                            to the example on the
                            <ulink url='https://wiki.yoctoproject.org/wiki/TipsAndTricks/RunningEclipseAgainstBuiltImage'> Cookbook guide to Making an Eclipse Debug Capable Image</ulink>
                            wiki page.
                        </note>
                    </para>

                    <section id='neon-configuring-the-cross-compiler-options'>
                        <title>Configuring the Cross-Compiler Options</title>

                        <para>
                            Cross Compiler options enable Eclipse to use your
                            specific cross compiler toolchain.
                            To configure these options, you must select
                            the type of toolchain, point to the toolchain,
                            specify the sysroot location, and select the target
                            architecture.
                            <itemizedlist>
                                <listitem><para>
                                    <emphasis>Selecting the Toolchain
                                    Type:</emphasis>
                                    Choose between
                                    <filename>Standalone pre-built toolchain</filename>
                                    and
                                    <filename>Build system derived toolchain</filename>
                                    for Cross Compiler Options.
                                    <itemizedlist>
                                        <listitem><para>
                                            <emphasis>
                                            <filename>Standalone Pre-built Toolchain:</filename>
                                            </emphasis>
                                            Select this type when you are using
                                            a stand-alone cross-toolchain.
                                            For example, suppose you are an
                                            application developer and do not
                                            need to build a target image.
                                            Instead, you just want to use an
                                            architecture-specific toolchain on
                                            an existing kernel and target root
                                            filesystem.
                                            In other words, you have downloaded
                                            and installed a pre-built toolchain
                                            for an existing image.
                                            </para></listitem>
                                        <listitem><para>
                                            <emphasis>
                                            <filename>Build System Derived Toolchain:</filename>
                                            </emphasis>
                                            Select this type if you built the
                                            toolchain as part of the
                                            <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
                                            When you select
                                            <filename>Build system derived toolchain</filename>,
                                            you are using the toolchain built
                                            and bundled inside the Build
                                            Directory.
                                            For example, suppose you created a
                                            suitable image using the steps in the
                                            <ulink url='https://wiki.yoctoproject.org/wiki/TipsAndTricks/RunningEclipseAgainstBuiltImage'>wiki</ulink>.
                                            In this situation, you would select
                                            the
                                            <filename>Build system derived toolchain</filename>.
                                            </para></listitem>
                                    </itemizedlist>
                                    </para></listitem>
                                <listitem><para>
                                    <emphasis>Specify the Toolchain Root
                                    Location:</emphasis>
                                    If you are using a stand-alone pre-built
                                    toolchain, you should be pointing to where
                                    it is installed (e.g.
                                    <filename>/opt/poky/&DISTRO;</filename>).
                                    See the
                                    "<link linkend='sdk-installing-the-sdk'>Installing the SDK</link>"
                                    section for information about how the SDK is
                                    installed.</para>
                                    <para>If you are using a build system
                                    derived toolchain, the path you provide for
                                    the
                                    <filename>Toolchain Root Location</filename>
                                    field is the
                                    <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
                                    from which you run the
                                    <filename>bitbake</filename> command (e.g
                                    <filename>/home/scottrif/poky/build</filename>).
                                    </para>
                                    <para>For more information, see the
                                    "<link linkend='sdk-building-an-sdk-installer'>Building an SDK Installer</link>"
                                    section.
                                    </para></listitem>
                                <listitem><para>
                                    <emphasis>Specify Sysroot Location:
                                    </emphasis>
                                    This location is where the root filesystem
                                    for the target hardware resides.
                                    </para>
                                    <para>This location depends on where you
                                    separately extracted and installed the
                                    target filesystem.
                                    As an example, suppose you prepared an
                                    image using the steps in the
                                    <ulink url='https://wiki.yoctoproject.org/wiki/TipsAndTricks/RunningEclipseAgainstBuiltImage'>wiki</ulink>.
                                    If so, the
                                    <filename>MY_QEMU_ROOTFS</filename>
                                    directory is found in the
                                    <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
                                    and you would browse to and select that
                                    directory (e.g.
                                    <filename>/home/scottrif/poky/build/MY_QEMU_ROOTFS</filename>).
                                    </para>
                                    <para>For more information on how to
                                    install the toolchain and on how to extract
                                    and install the sysroot filesystem, see the
                                    "<link linkend='sdk-building-an-sdk-installer'>Building an SDK Installer</link>"
                                    section.
                                    </para></listitem>
                                <listitem><para>
                                    <emphasis>Select the Target Architecture:
                                    </emphasis>
                                    The target architecture is the type of
                                    hardware you are going to use or emulate.
                                    Use the pull-down
                                    <filename>Target Architecture</filename>
                                    menu to make your selection.
                                    The pull-down menu should have the
                                    supported architectures.
                                    If the architecture you need is not listed
                                    in the menu, you will need to build the
                                    image.
                                    See the
                                    "<ulink url='&YOCTO_DOCS_QS_URL;#qs-building-images'>Building Images</ulink>"
                                    section of the Yocto Project Quick Start
                                    for more information.
                                    You can also see the
                                    <ulink url='https://wiki.yoctoproject.org/wiki/TipsAndTricks/RunningEclipseAgainstBuiltImage'>wiki</ulink>.
                                    </para></listitem>
                            </itemizedlist>
                        </para>
                    </section>

                    <section id='neon-configuring-the-target-options'>
                        <title>Configuring the Target Options</title>

                        <para>
                            You can choose to emulate hardware using the QEMU
                            emulator, or you can choose to run your image on
                            actual hardware.
                            <itemizedlist>
                                <listitem><para>
                                    <emphasis>QEMU:</emphasis>
                                    Select this option if you will be using the
                                    QEMU emulator.
                                    If you are using the emulator, you also
                                    need to locate the kernel and specify any
                                    custom options.</para>
                                    <para>If you selected the
                                    <filename>Build system derived toolchain</filename>,
                                    the target kernel you built will be located
                                    in the
                                    <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
                                    in
                                    <filename>tmp/deploy/images/<replaceable>machine</replaceable></filename>
                                    directory.
                                    As an example, suppose you performed the
                                    steps in the
                                    <ulink url='https://wiki.yoctoproject.org/wiki/TipsAndTricks/RunningEclipseAgainstBuiltImage'>wiki</ulink>.
                                    In this case, you specify your Build
                                    Directory path followed by the image (e.g.
                                    <filename>/home/scottrif/poky/build/tmp/deploy/images/qemux86/bzImage-qemux86.bin</filename>).
                                    </para>
                                    <para>If you selected the standalone
                                    pre-built toolchain, the pre-built image
                                    you downloaded is located in the directory
                                    you specified when you downloaded the
                                    image.</para>
                                    <para>Most custom options are for advanced
                                    QEMU users to further customize their QEMU
                                    instance.
                                    These options are specified between paired
                                    angled brackets.
                                    Some options must be specified outside the
                                    brackets.
                                    In particular, the options
                                    <filename>serial</filename>,
                                    <filename>nographic</filename>, and
                                    <filename>kvm</filename> must all be
                                    outside the brackets.
                                    Use the <filename>man qemu</filename>
                                    command to get help on all the options and
                                    their use.
                                    The following is an example:
                                   <literallayout class='monospaced'>
    serial ‘&lt;-m 256 -full-screen&gt;’
                                    </literallayout></para>
                                    <para>
                                    Regardless of the mode, Sysroot is already
                                    defined as part of the Cross-Compiler
                                    Options configuration in the
                                    <filename>Sysroot Location:</filename>
                                    field.
                                    </para></listitem>
                                <listitem><para>
                                    <emphasis>External HW:</emphasis>
                                    Select this option if you will be using
                                    actual hardware.</para></listitem>
                            </itemizedlist>
                        </para>

                        <para>
                            Click the "Apply" and "OK" to save your plug-in
                            configurations.
                        </para>
                    </section>
                </section>
            </section>

            <section id='neon-creating-the-project'>
                <title>Creating the Project</title>

                <para>
                    You can create two types of projects:  Autotools-based, or
                    Makefile-based.
                    This section describes how to create Autotools-based
                    projects from within the Eclipse IDE.
                    For information on creating Makefile-based projects in a
                    terminal window, see the
                    "<link linkend='makefile-based-projects'>Makefile-Based Projects</link>"
                    section.
                    <note>
                        Do not use special characters in project names
                        (e.g. spaces, underscores, etc.).  Doing so can
                        cause configuration to fail.
                    </note>
                </para>

                <para>
                    To create a project based on a Yocto template and then
                    display the source code, follow these steps:
                    <orderedlist>
                        <listitem><para>
                            Select "C Project" from the "File -> New" menu.
                            </para></listitem>
                        <listitem><para>
                            Expand
                            <filename>Yocto Project SDK Autotools Project</filename>.
                            </para></listitem>
                        <listitem><para>
                            Select <filename>Hello World ANSI C Autotools Projects</filename>.
                            This is an Autotools-based project based on a Yocto
                            template.
                            </para></listitem>
                        <listitem><para>
                            Put a name in the
                            <filename>Project name:</filename> field.
                            Do not use hyphens as part of the name
                            (e.g. <filename>hello</filename>).
                            </para></listitem>
                        <listitem><para>
                            Click "Next".
                            </para></listitem>
                        <listitem><para>
                            Add appropriate information in the various fields.
                            </para></listitem>
                        <listitem><para>
                            Click "Finish".
                            </para></listitem>
                        <listitem><para>
                            If the "open perspective" prompt appears,
                            click "Yes" so that you in the C/C++ perspective.
                            </para></listitem>
                        <listitem><para>The left-hand navigation pane shows
                            your project.
                            You can display your source by double clicking the
                            project's source file.
                            </para></listitem>
                    </orderedlist>
                </para>
            </section>

            <section id='neon-configuring-the-cross-toolchains'>
                <title>Configuring the Cross-Toolchains</title>

                <para>
                    The earlier section,
                    "<link linkend='neon-configuring-the-eclipse-yocto-plug-in'>Configuring the Neon Eclipse Yocto Plug-in</link>",
                    sets up the default project configurations.
                    You can override these settings for a given project by
                    following these steps:
                    <orderedlist>
                        <listitem><para>
                            Select "Yocto Project Settings" from
                            the "Project -> Properties" menu.
                            This selection brings up the Yocto Project Settings
                            Dialog and allows you to make changes specific to
                            an individual project.</para>
                            <para>By default, the Cross Compiler Options and
                            Target Options for a project are inherited from
                            settings you provided using the Preferences Dialog
                            as described earlier in the
                            "<link linkend='neon-configuring-the-eclipse-yocto-plug-in'>Configuring the Neon Eclipse Yocto Plug-in</link>"
                            section.
                            The Yocto Project Settings Dialog allows you to
                            override those default settings for a given
                            project.
                            </para></listitem>
                        <listitem><para>
                            Make or verify your configurations for the
                            project and click "OK".
                            </para></listitem>
                        <listitem><para>
                            Right-click in the navigation pane and
                            select "Reconfigure Project" from the pop-up menu.
                            This selection reconfigures the project by running
                            <filename>autogen.sh</filename> in the workspace
                            for your project.
                            The script also runs
                            <filename>libtoolize</filename>,
                            <filename>aclocal</filename>,
                            <filename>autoconf</filename>,
                            <filename>autoheader</filename>,
                            <filename>automake --a</filename>, and
                            <filename>./configure</filename>.
                            Click on the "Console" tab beneath your source code
                            to see the results of reconfiguring your project.
                            </para></listitem>
                    </orderedlist>
                </para>
            </section>

            <section id='neon-building-the-project'>
                <title>Building the Project</title>

                <para>
                    To build the project select "Build All" from the
                    "Project" menu.
                    The console should update and you can note the
                    cross-compiler you are using.
                    <note>
                        When building "Yocto Project SDK Autotools" projects,
                        the Eclipse IDE might display error messages for
                        Functions/Symbols/Types that cannot be "resolved",
                        even when the related include file is listed at the
                        project navigator and when the project is able to
                        build.
                        For these cases only, it is recommended to add a new
                        linked folder to the appropriate sysroot.
                        Use these steps to add the linked folder:
                        <orderedlist>
                            <listitem><para>
                                Select the project.
                                </para></listitem>
                            <listitem><para>
                                Select "Folder" from the
                                <filename>File > New</filename> menu.
                                </para></listitem>
                            <listitem><para>
                                In the "New Folder" Dialog, select "Link to
                                alternate location (linked folder)".
                                </para></listitem>
                            <listitem><para>
                                Click "Browse" to navigate to the include
                                folder inside the same sysroot location
                                selected in the Yocto Project
                                configuration preferences.
                                </para></listitem>
                            <listitem><para>
                                Click "OK".
                                </para></listitem>
                            <listitem><para>
                                Click "Finish" to save the linked folder.
                                </para></listitem>
                        </orderedlist>
                    </note>
                </para>
            </section>

            <section id='neon-starting-qemu-in-user-space-nfs-mode'>
                <title>Starting QEMU in User-Space NFS Mode</title>

                <para>
                    To start the QEMU emulator from within Eclipse, follow
                    these steps:
                    <note>
                        See the
                        "<ulink url='&YOCTO_DOCS_DEV_URL;#dev-manual-qemu'>Using the Quick EMUlator (QEMU)</ulink>"
                        chapter in the Yocto Project Development Manual
                        for more information on using QEMU.
                    </note>
                    <orderedlist>
                        <listitem><para>Expose and select "External Tools
                            Configurations ..." from the "Run -> External
                            Tools" menu.
                            </para></listitem>
                        <listitem><para>
                            Locate and select your image in the navigation
                            panel to the left
                            (e.g. <filename>qemu_i586-poky-linux</filename>).
                            </para></listitem>
                        <listitem><para>
                            Click "Run" to launch QEMU.
                            <note>
                                The host on which you are running QEMU must
                                have the <filename>rpcbind</filename> utility
                                running to be able to make RPC calls on a
                                server on that machine.
                                If QEMU does not invoke and you receive error
                                messages involving
                                <filename>rpcbind</filename>, follow the
                                suggestions to get the service running.
                                As an example, on a new Ubuntu 16.04 LTS
                                installation, you must do the following in
                                order to get QEMU to launch:
                                <literallayout class='monospaced'>
     $ sudo apt-get install rpcbind
                                </literallayout>
                                After installing <filename>rpcbind</filename>,
                                you need to edit the
                                <filename>/etc/init.d/rpcbind</filename> file
                                to include the following line:
                                <literallayout class='monospaced'>
     OPTIONS="-i -w"
                                </literallayout>
                                After modifying the file, you need to start the
                                service:
                                <literallayout class='monospaced'>
     $ sudo service portmap restart
                                </literallayout>
                            </note>
                            </para></listitem>
                        <listitem><para>
                            If needed, enter your host root password in
                            the shell window at the prompt.
                            This sets up a <filename>Tap 0</filename>
                            connection needed for running in user-space NFS
                            mode.
                            </para></listitem>
                        <listitem><para>
                            Wait for QEMU to launch.
                            </para></listitem>
                        <listitem><para>
                            Once QEMU launches, you can begin operating
                            within that environment.
                            One useful task at this point would be to determine
                            the IP Address for the user-space NFS by using the
                            <filename>ifconfig</filename> command.
                            The IP address of the QEMU machine appears in the
                            xterm window.
                            You can use this address to help you see which
                            particular
                            IP address the instance of QEMU is using.
                            </para></listitem>
                    </orderedlist>
                </para>
            </section>

            <section id='neon-deploying-and-debugging-the-application'>
                <title>Deploying and Debugging the Application</title>

                <para>
                    Once the QEMU emulator is running the image, you can deploy
                    your application using the Eclipse IDE and then use
                    the emulator to perform debugging.
                    Follow these steps to deploy the application.
                    <note>
                        Currently, Eclipse does not support SSH port
                        forwarding.
                        Consequently, if you need to run or debug a remote
                        application using the host display, you must create a
                        tunneling connection from outside Eclipse and keep
                        that connection alive during your work.
                        For example, in a new terminal, run the following:
                        <literallayout class='monospaced'>
     $ ssh -XY <replaceable>user_name</replaceable>@<replaceable>remote_host_ip</replaceable>
                        </literallayout>
                        Using the above form, here is an example:
                        <literallayout class='monospaced'>
     $ ssh -XY root@192.168.7.2
                        </literallayout>
                        After running the command, add the command to be
                        executed in Eclipse's run configuration before the
                        application as follows:
                        <literallayout class='monospaced'>
     export DISPLAY=:10.0
                        </literallayout>
                        Be sure to not destroy the connection during your QEMU
                        session (i.e. do not
                        exit out of or close that shell).
                    </note>
                    <orderedlist>
                        <listitem><para>
                            Select "Debug Configurations..." from the
                            "Run" menu.
                            </para></listitem>
                        <listitem><para>
                            In the left area, expand
                            <filename>C/C++Remote Application</filename>.
                            </para></listitem>
                        <listitem><para>
                            Locate your project and select it to bring
                            up a new tabbed view in the Debug Configurations
                            Dialog.
                            </para></listitem>
                        <listitem><para>
                            Click on the "Debugger" tab to see the
                            cross-tool debugger you are using.
                            Be sure to change to the debugger perspective in
                            Eclipse.
                            </para></listitem>
                        <listitem><para>
                            Click on the "Main" tab.
                            </para></listitem>
                        <listitem><para>
                            Create a new connection to the QEMU instance
                            by clicking on "new".</para></listitem>
                        <listitem><para>Select <filename>SSH</filename>, which
                            means Secure Socket Shell and then click "OK".
                            Optionally, you can select an TCF connection
                            instead.
                            </para></listitem>
                        <listitem><para>
                            Clear out the "Connection name" field and
                            enter any name you want for the connection.
                            </para></listitem>
                        <listitem><para>
                            Put the IP address for the connection in
                            the "Host" field.
                            For QEMU, the default is
                            <filename>192.168.7.2</filename>.
                            However, if a previous QEMU session did not exit
                            cleanly, the IP address increments (e.g.
                            <filename>192.168.7.3</filename>).
                            <note>
                                You can find the IP address for the current
                                QEMU session by looking in the xterm that
                                opens when you launch QEMU.
                            </note>
                            </para></listitem>
                        <listitem><para>
                            Enter <filename>root</filename>, which
                            is the default for QEMU, for the "User" field.
                            Be sure to leave the password field empty.
                            </para></listitem>
                        <listitem><para>
                            Click "Finish" to close the New Connections Dialog.
                            </para></listitem>
                        <listitem><para>
                            If necessary, use the drop-down menu now in the
                            "Connection" field and pick the IP Address you
                            entered.
                             </para></listitem>
                        <listitem><para>
                            Assuming you are connecting as the root
                            user, which is the default for QEMU x86-64 SDK
                            images provided by the Yocto Project, in the
                            "Remote Absolute File Path for C/C++ Application"
                            field, browse to
                            <filename>/home/root/</filename><replaceable>ProjectName</replaceable>
                            (e.g. <filename>/home/root/hello</filename>).
                            You could also browse to any other path you have
                            write access to on the target such as
                            <filename>/usr/bin</filename>.
                            This location is where your application will be
                            located on the QEMU system.
                            If you fail to browse to and specify an appropriate
                            location, QEMU will not understand what to remotely
                            launch.
                            Eclipse is helpful in that it auto fills your
                            application name for you assuming you browsed to a
                            directory.
                            <note>
                                If you are prompted to provide a username and
                                to optionally set a password, be sure you
                                provide "root" as the username and you leave
                                the password field blank.
                            </note>
                            </para></listitem>
                        <listitem><para>
                            Be sure you change to the "Debug" perspective in
                            Eclipse.
                            </para></listitem>
                        <listitem><para>
                            Click "Debug"
                            </para></listitem>
                        <listitem><para>
                            Accept the debug perspective.
                            </para></listitem>
                    </orderedlist>
                </para>
            </section>

            <section id='neon-using-Linuxtools'>
                <title>Using Linuxtools</title>

                <para>
                    As mentioned earlier in the manual, performance tools exist
                    (Linuxtools) that enhance your development experience.
                    These tools are aids in developing and debugging
                    applications and images.
                    You can run these tools from within the Eclipse IDE through
                    the "Linuxtools" menu.
                </para>

                <para>
                    For information on how to configure and use these tools,
                    see
                    <ulink url='http://www.eclipse.org/linuxtools/'>http://www.eclipse.org/linuxtools/</ulink>.
                </para>
            </section>
        </section>
    </section>
</chapter>
<!--
vim: expandtab tw=80 ts=4
-->