path: root/documentation/ref-manual/migration.xml

<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
[<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] >

<chapter id='migration'>
<title>Migrating to a Newer Yocto Project Release</title>

    <para>
        This chapter provides information you can use to migrate work to a
        newer Yocto Project release.  You can find the same information in the
        release notes for a given release.
    </para>

<section id='general-migration-considerations'>
    <title>General Migration Considerations</title>

    <para>
        Some considerations are not tied to a specific Yocto Project
        release.
        This section presents information you should consider when
        migrating to any new Yocto Project release.
        <itemizedlist>
            <listitem><para><emphasis>Dealing with Customized Recipes</emphasis>:
                Issues could arise if you take older recipes that contain
                customizations and simply copy them forward expecting them
                to work after you migrate to new Yocto Project metadata.
                For example, suppose you have a recipe in your layer that is
                a customized version of a core recipe copied from the earlier
                release, rather than through the use of an append file.
                When you migrate to a newer version of Yocto Project, the
                metadata (e.g. perhaps an include file used by the recipe)
                could have changed in a way that would break the build.
                Say, for example, a function is removed from an include file
                and the customized recipe tries to call that function.
                </para>

                <para>You could "forward-port" all your customizations in your
                recipe so that everything works for the new release.
                However, this is not the optimal solution as you would have
                to repeat this process with each new release if changes
                occur that give rise to problems.</para>

                <para>The better solution (where practical) is to use append
                files (<filename>*.bbappend</filename>) to capture any
                customizations you want to make to a recipe.
                Doing so, isolates your changes from the main recipe making
                them much more manageable.
                However, sometimes it is not practical to use an append
                file.
                A good example of this is when introducing a newer or older
                version of a recipe in another layer.</para>
                </listitem>
            <listitem><para><emphasis>Updating Append Files</emphasis>:
                Since append files generally only contain your customizations,
                they often do not need to be adjusted for new releases.
                However, if the <filename>.bbappend</filename> file is
                specific to a particular version of the recipe (i.e. its
                name does not use the % wildcard) and the version of the
                recipe to which it is appending has changed, then you will
                at a minimum need to rename the append file to match the
                name of the recipe file.
                A mismatch between an append file and its corresponding
                recipe file (<filename>.bb</filename>) will
                trigger an error during parsing.</para>
                <para>Depending on the type of customization the append file
                applies, other incompatibilities might occur when you
                upgrade.
                For example, if your append file applies a patch and the
                recipe to which it is appending is updated to a newer
                version, the patch might no longer apply.
                If this is the case and assuming the patch is still needed,
                you must modify the patch file so that it does apply.
                </para></listitem>
        </itemizedlist>
    </para>
</section>

<section id='moving-to-the-yocto-project-1.3-release'>
    <title>Moving to the Yocto Project 1.3 Release</title>

    <para>
        This section provides migration information for moving to the
        Yocto Project 1.3 Release from the prior release.
    </para>

    <section id='1.3-local-configuration'>
        <title>Local Configuration</title>

        <para>
            Differences include changes for
            <link linkend='var-SSTATE_MIRRORS'><filename>SSTATE_MIRRORS</filename></link>
            and <filename>bblayers.conf</filename>.
        </para>

        <section id='migration-1.3-sstate-mirrors'>
            <title>SSTATE_MIRRORS</title>

            <para>
                The shared state cache (sstate-cache), as pointed to by
                <link linkend='var-SSTATE_DIR'><filename>SSTATE_DIR</filename></link>, by default
                now has two-character subdirectories to prevent issues arising
                from too many files in the same directory.
                Also, native sstate-cache packages will go into a subdirectory named using
                the distro ID string.
                If you copy the newly structured sstate-cache to a mirror location
                (either local or remote) and then point to it in
                <link linkend='var-SSTATE_MIRRORS'><filename>SSTATE_MIRRORS</filename></link>,
                you need to append "PATH" to the end of the mirror URL so that
                the path used by BitBake before the mirror substitution is
                appended to the path used to access the mirror.
                Here is an example:
                <literallayout class='monospaced'>
     SSTATE_MIRRORS = "file://.* http://<replaceable>someserver</replaceable>.tld/share/sstate/PATH"
                </literallayout>
            </para>
        </section>

        <section id='migration-1.3-bblayers-conf'>
            <title>bblayers.conf</title>

            <para>
                The <filename>meta-yocto</filename> layer consists of two parts
                that correspond to the Poky reference distribution and the
                reference hardware Board Support Packages (BSPs), respectively:
                <filename>meta-yocto</filename> and
                <filename>meta-yocto-bsp</filename>.
                When running BitBake or Hob for the first time after upgrading,
                your <filename>conf/bblayers.conf</filename> file will be
                updated to handle this change and you will be asked to
                re-run or restart for the changes to take effect.
            </para>
        </section>
    </section>

    <section id='1.3-recipes'>
        <title>Recipes</title>

        <para>
            Differences include changes for the following:
            <itemizedlist>
                <listitem><para>Python function whitespace</para></listitem>
                <listitem><para><filename>proto=</filename> in <filename>SRC_URI</filename></para></listitem>
                <listitem><para><filename>nativesdk</filename></para></listitem>
                <listitem><para>Task recipes</para></listitem>
                <listitem><para><filename>IMAGE_FEATURES</filename></para></listitem>
                <listitem><para>Removed recipes</para></listitem>
            </itemizedlist>
        </para>

        <section id='migration-1.3-python-function-whitespace'>
            <title>Python Function Whitespace</title>

            <para>
                All Python functions must now use four spaces for indentation.
                Previously, an inconsistent mix of spaces and tabs existed,
                which made extending these functions using
                <filename>_append</filename> or <filename>_prepend</filename>
                complicated given that Python treats whitespace as
                syntactically significant.
                If you are defining or extending any Python functions (e.g.
                <filename>populate_packages</filename>, <filename>do_unpack</filename>,
                <filename>do_patch</filename> and so forth) in custom recipes
                or classes, you need to ensure you are using consistent
                four-space indentation.
            </para>
        </section>

        <section id='migration-1.3-proto=-in-src-uri'>
            <title>proto= in SRC_URI</title>

            <para>
                Any use of <filename>proto=</filename> in
                <link linkend='var-SRC_URI'><filename>SRC_URI</filename></link>
                needs to be changed to <filename>protocol=</filename>.
                In particular, this applies to the following URIs:
                <itemizedlist>
                    <listitem><para><filename>svn://</filename></para></listitem>
                    <listitem><para><filename>bzr://</filename></para></listitem>
                    <listitem><para><filename>hg://</filename></para></listitem>
                    <listitem><para><filename>osc://</filename></para></listitem>
                </itemizedlist>
                Other URIs were already using <filename>protocol=</filename>.
                This change improves consistency.
            </para>
        </section>

        <section id='migration-1.3-nativesdk'>
            <title>nativesdk</title>

            <para>
                The suffix <filename>nativesdk</filename> is now implemented
                as a prefix, which simplifies a lot of the packaging code for
                <filename>nativesdk</filename> recipes.
                All custom <filename>nativesdk</filename> recipes and any
                references need to be updated to use
                <filename>nativesdk-*</filename> instead of
                <filename>*-nativesdk</filename>.
            </para>
        </section>

        <section id='migration-1.3-task-recipes'>
            <title>Task Recipes</title>

            <para>
                "Task" recipes are now known as "Package groups" and have
                been renamed from <filename>task-*.bb</filename> to
                <filename>packagegroup-*.bb</filename>.
                Existing references to the previous <filename>task-*</filename>
                names should work in most cases as there is an automatic
                upgrade path for most packages.
                However, you should update references in your own recipes and
                configurations as they could be removed in future releases.
                You should also rename any custom <filename>task-*</filename>
                recipes to <filename>packagegroup-*</filename>, and change
                them to inherit <filename>packagegroup</filename> instead of
                <filename>task</filename>, as well as taking the opportunity
                to remove anything now handled by
                <filename>packagegroup.bbclass</filename>, such as providing
                <filename>-dev</filename> and <filename>-dbg</filename>
                packages, setting
                <link linkend='var-LIC_FILES_CHKSUM'><filename>LIC_FILES_CHKSUM</filename></link>,
                and so forth.
                See the
                "<link linkend='ref-classes-packagegroup'><filename>packagegroup.bbclass</filename></link>"
                section for further details.
            </para>
        </section>

        <section id='migration-1.3-image-features'>
            <title>IMAGE_FEATURES</title>

            <para>
                Image recipes that previously included "apps-console-core"
                in <link linkend='var-IMAGE_FEATURES'><filename>IMAGE_FEATURES</filename></link>
                should now include "splash" instead to enable the boot-up
                splash screen.
                Retaining "apps-console-core" will still include the splash
                screen but generates a warning.
                The "apps-x11-core" and "apps-x11-games"
                <filename>IMAGE_FEATURES</filename> features have been removed.
            </para>
        </section>

        <section id='migration-1.3-removed-recipes'>
            <title>Removed Recipes</title>

            <para>
                The following recipes have been removed.
                For most of them, it is unlikely that you would have any
                references to them in your own
                <ulink url='&YOCTO_DOCS_DEV_URL;#metadata'>Metadata</ulink>.
                However, you should check your metadata against this list to be sure:
                <itemizedlist>
                    <listitem><para><emphasis><filename>libx11-trim</filename></emphasis>:
                        Replaced by <filename>libx11</filename>, which has a negligible
                        size difference with modern Xorg.</para></listitem>
                    <listitem><para><emphasis><filename>xserver-xorg-lite</filename></emphasis>:
                        Use <filename>xserver-xorg</filename>, which has a negligible
                        size difference when DRI and GLX modules are not installed.</para></listitem>
                    <listitem><para><emphasis><filename>xserver-kdrive</filename></emphasis>:
                        Effectively unmaintained for many years.</para></listitem>
                    <listitem><para><emphasis><filename>mesa-xlib</filename></emphasis>:
                        No longer serves any purpose.</para></listitem>
                    <listitem><para><emphasis><filename>galago</filename></emphasis>:
                        Replaced by telepathy.</para></listitem>
                    <listitem><para><emphasis><filename>gail</filename></emphasis>:
                        Functionality was integrated into GTK+ 2.13.</para></listitem>
                    <listitem><para><emphasis><filename>eggdbus</filename></emphasis>:
                        No longer needed.</para></listitem>
                    <listitem><para><emphasis><filename>gcc-*-intermediate</filename></emphasis>:
                        The build has been restructured to avoid the need for
                        this step.</para></listitem>
                    <listitem><para><emphasis><filename>libgsmd</filename></emphasis>:
                        Unmaintained for many years.
                        Functionality now provided by
                        <filename>ofono</filename> instead.</para></listitem>
                    <listitem><para><emphasis>contacts, dates, tasks, eds-tools</emphasis>:
                        Largely unmaintained PIM application suite.
                        It has been moved to <filename>meta-gnome</filename>
                        in <filename>meta-openembedded</filename>.</para></listitem>
                </itemizedlist>
                In addition to the previously listed changes, the
                <filename>meta-demoapps</filename> directory has also been removed
                because the recipes in it were not being maintained and many
                had become obsolete or broken.
                Additionally, these recipes were not parsed in the default configuration.
                Many of these recipes are already provided in an updated and
                maintained form within the OpenEmbedded community layers such as
                <filename>meta-oe</filename> and <filename>meta-gnome</filename>.
                For the remainder, you can now find them in the
                <filename>meta-extras</filename> repository, which is in the
                Yocto Project
                <ulink url='&YOCTO_DOCS_DEV_URL;#source-repositories'>Source Repositories</ulink>.
            </para>
        </section>
    </section>

    <section id='1.3-linux-kernel-naming'>
        <title>Linux Kernel Naming</title>

        <para>
            The naming scheme for kernel output binaries has been changed to
            now include
            <link linkend='var-PE'><filename>PE</filename></link> as part of the
            filename:
            <literallayout class='monospaced'>
     KERNEL_IMAGE_BASE_NAME ?= "${KERNEL_IMAGETYPE}-${PE}-${PV}-${PR}-${MACHINE}-${DATETIME}"
            </literallayout>
        </para>

        <para>
            Because the <filename>PE</filename> variable is not set by default,
            these binary files could result with names that include two dash
            characters.
            Here is an example:
            <literallayout class='monospaced'>
     bzImage--3.10.9+git0+cd502a8814_7144bcc4b8-r0-qemux86-64-20130830085431.bin
            </literallayout>
        </para>
    </section>
</section>

<section id='moving-to-the-yocto-project-1.4-release'>
    <title>Moving to the Yocto Project 1.4 Release</title>

    <para>
        This section provides migration information for moving to the
        Yocto Project 1.4 Release from the prior release.
    </para>

    <section id='migration-1.4-bitbake'>
        <title>BitBake</title>

        <para>
            Differences include the following:
            <itemizedlist>
                <listitem><para><emphasis>Comment Continuation:</emphasis>
                    If a comment ends with a line continuation (\) character,
                    then the next line must also be a comment.
                    Any instance where this is not the case, now triggers
                    a warning.
                    You must either remove the continuation character, or be
                    sure the next line is a comment.
                    </para></listitem>
                <listitem><para><emphasis>Package Name Overrides:</emphasis>
                    The runtime package specific variables
                    <link linkend='var-RDEPENDS'><filename>RDEPENDS</filename></link>,
                    <link linkend='var-RRECOMMENDS'><filename>RRECOMMENDS</filename></link>,
                    <link linkend='var-RSUGGESTS'><filename>RSUGGESTS</filename></link>,
                    <link linkend='var-RPROVIDES'><filename>RPROVIDES</filename></link>,
                    <link linkend='var-RCONFLICTS'><filename>RCONFLICTS</filename></link>,
                    <link linkend='var-RREPLACES'><filename>RREPLACES</filename></link>,
                    <link linkend='var-FILES'><filename>FILES</filename></link>,
                    <link linkend='var-ALLOW_EMPTY'><filename>ALLOW_EMPTY</filename></link>,
                    and the pre, post, install, and uninstall script functions
                    <filename>pkg_preinst</filename>,
                    <filename>pkg_postinst</filename>,
                    <filename>pkg_prerm</filename>, and
                    <filename>pkg_postrm</filename> should always have a
                    package name override.
                    For example, use <filename>RDEPENDS_${PN}</filename> for
                    the main package instead of <filename>RDEPENDS</filename>.
                    BitBake uses more strict checks when it parses recipes.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>

    <section id='migration-1.4-build-behavior'>
        <title>Build Behavior</title>

        <para>
            Differences include the following:
            <itemizedlist>
                <listitem><para><emphasis>Shared State Code:</emphasis>
                    The shared state code has been optimized to avoid running
                    unnecessary tasks.
                    For example, the following no longer populates the target
                    sysroot since that is not necessary:
                    <literallayout class='monospaced'>
     $ bitbake -c rootfs <replaceable>some-image</replaceable>
                    </literallayout>
                    Instead, the system just needs to extract the output
                    package contents, re-create the packages, and construct
                    the root filesystem.
                    This change is unlikely to cause any problems unless
                    you have missing declared dependencies.
                    </para></listitem>
                <listitem><para><emphasis>Scanning Directory Names:</emphasis>
                    When scanning for files in
                    <link linkend='var-SRC_URI'><filename>SRC_URI</filename></link>,
                    the build system now uses
                    <link linkend='var-FILESOVERRIDES'><filename>FILESOVERRIDES</filename></link>
                    instead of <link linkend='var-OVERRIDES'><filename>OVERRIDES</filename></link>
                    for the directory names.
                    In general, the values previously in
                    <filename>OVERRIDES</filename> are now in
                    <filename>FILESOVERRIDES</filename> as well.
                    However, if you relied upon an additional value
                    you previously added to <filename>OVERRIDES</filename>,
                    you might now need to add it to
                    <filename>FILESOVERRIDES</filename> unless you are already
                    adding it through the
                    <link linkend='var-MACHINEOVERRIDES'><filename>MACHINEOVERRIDES</filename></link>
                    or <link linkend='var-DISTROOVERRIDES'><filename>DISTROOVERRIDES</filename></link>
                    variables, as appropriate.
                    For more related changes, see the
                    "<link linkend='migration-1.4-variables'>Variables</link>"
                    section.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>


    <section id='migration-1.4-proxies-and-fetching-source'>
        <title>Proxies and Fetching Source</title>

        <para>
            A new <filename>oe-git-proxy</filename> script has been added to
            replace previous methods of handling proxies and fetching source
            from Git.
            See the <filename>meta-yocto/conf/site.conf.sample</filename> file
            for information on how to use this script.
        </para>
    </section>

    <section id='migration-1.4-custom-interfaces-file-netbase-change'>
        <title>Custom Interfaces File (netbase change)</title>

        <para>
            If you have created your own custom
            <filename>etc/network/interfaces</filename> file by creating
            an append file for the <filename>netbase</filename> recipe,
            you now need to create an append file for the
            <filename>init-ifupdown</filename> recipe instead, which you can
            find in the
            <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>
            at <filename>meta/recipes-core/init-ifupdown</filename>.
            For information on how to use append files, see the
            "<ulink url='&YOCTO_DOCS_DEV_URL;#using-bbappend-files'>Using .bbappend Files</ulink>"
            in the Yocto Project Development Manual.
        </para>
    </section>

    <section id='migration-1.4-remote-debugging'>
        <title>Remote Debugging</title>

        <para>
            Support for remote debugging with the Eclipse IDE is now
            separated into an image feature
            (<filename>eclipse-debug</filename>) that corresponds to the
            <filename>packagegroup-core-eclipse-debug</filename> package group.
            Previously, the debugging feature was included through the
            <filename>tools-debug</filename> image feature, which corresponds
            to the <filename>packagegroup-core-tools-debug</filename>
            package group.
        </para>
    </section>

    <section id='migration-1.4-variables'>
        <title>Variables</title>

        <para>
            The following variables have changed:
            <itemizedlist>
                <listitem><para><emphasis><filename>SANITY_TESTED_DISTROS</filename>:</emphasis>
                    This variable now uses a distribution ID, which is composed
                    of the host distributor ID followed by the release.
                    Previously,
                    <link linkend='var-SANITY_TESTED_DISTROS'><filename>SANITY_TESTED_DISTROS</filename></link>
                    was composed of the description field.
                    For example, "Ubuntu 12.10" becomes "Ubuntu-12.10".
                    You do not need to worry about this change if you are not
                    specifically setting this variable, or if you are
                    specifically setting it to "".
                    </para></listitem>
                <listitem><para><emphasis><filename>SRC_URI</filename>:</emphasis>
                    The <filename>${</filename><link linkend='var-PN'><filename>PN</filename></link><filename>}</filename>,
                    <filename>${</filename><link linkend='var-PF'><filename>PF</filename></link><filename>}</filename>,
                    <filename>${</filename><link linkend='var-P'><filename>P</filename></link><filename>}</filename>,
                    and <filename>FILE_DIRNAME</filename> directories have been
                    dropped from the default value of the
                    <link linkend='var-FILESPATH'><filename>FILESPATH</filename></link>
                    variable, which is used as the search path for finding files
                    referred to in
                    <link linkend='var-SRC_URI'><filename>SRC_URI</filename></link>.
                    If you have a recipe that relied upon these directories,
                    which would be unusual, then you will need to add the
                    appropriate paths within the recipe or, alternatively,
                    rearrange the files.
                    The most common locations are still covered by
                    <filename>${BP}</filename>, <filename>${BPN}</filename>,
                    and "files", which all remain in the default value of
                    <link linkend='var-FILESPATH'><filename>FILESPATH</filename></link>.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>

    <section id='migration-target-package-management-with-rpm'>
        <title>Target Package Management with RPM</title>

        <para>
            If runtime package management is enabled and the RPM backend
            is selected, Smart is now installed for package download, dependency
            resolution, and upgrades instead of Zypper.
            For more information on how to use Smart, run the following command
            on the target:
            <literallayout class='monospaced'>
     smart --help
            </literallayout>
        </para>
    </section>

    <section id='migration-1.4-recipes-moved'>
        <title>Recipes Moved</title>

        <para>
            The following recipes were moved from their previous locations
            because they are no longer used by anything in
            the OpenEmbedded-Core:
            <itemizedlist>
                <listitem><para><emphasis><filename>clutter-box2d</filename>:</emphasis>
                    Now resides in the <filename>meta-oe</filename> layer.
                    </para></listitem>
                <listitem><para><emphasis><filename>evolution-data-server</filename>:</emphasis>
                    Now resides in the <filename>meta-gnome</filename> layer.
                    </para></listitem>
                <listitem><para><emphasis><filename>gthumb</filename>:</emphasis>
                    Now resides in the <filename>meta-gnome</filename> layer.
                    </para></listitem>
                <listitem><para><emphasis><filename>gtkhtml2</filename>:</emphasis>
                    Now resides in the <filename>meta-oe</filename> layer.
                    </para></listitem>
                <listitem><para><emphasis><filename>gupnp</filename>:</emphasis>
                    Now resides in the <filename>meta-multimedia</filename> layer.
                    </para></listitem>
                <listitem><para><emphasis><filename>gypsy</filename>:</emphasis>
                    Now resides in the <filename>meta-oe</filename> layer.
                    </para></listitem>
                <listitem><para><emphasis><filename>libcanberra</filename>:</emphasis>
                    Now resides in the <filename>meta-gnome</filename> layer.
                    </para></listitem>
                <listitem><para><emphasis><filename>libgdata</filename>:</emphasis>
                    Now resides in the <filename>meta-gnome</filename> layer.
                    </para></listitem>
                <listitem><para><emphasis><filename>libmusicbrainz</filename>:</emphasis>
                    Now resides in the <filename>meta-multimedia</filename> layer.
                    </para></listitem>
                <listitem><para><emphasis><filename>metacity</filename>:</emphasis>
                    Now resides in the <filename>meta-gnome</filename> layer.
                    </para></listitem>
                <listitem><para><emphasis><filename>polkit</filename>:</emphasis>
                    Now resides in the <filename>meta-oe</filename> layer.
                    </para></listitem>
                <listitem><para><emphasis><filename>zeroconf</filename>:</emphasis>
                    Now resides in the <filename>meta-networking</filename> layer.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>

    <section id='migration-1.4-removals-and-renames'>
        <title>Removals and Renames</title>

        <para>
            The following list shows what has been removed or renamed:
            <itemizedlist>
                <listitem><para><emphasis><filename>evieext</filename>:</emphasis>
                    Removed because it has been removed from
                    <filename>xserver</filename> since 2008.
                    </para></listitem>
                <listitem><para><emphasis>Gtk+ DirectFB:</emphasis>
                    Removed support because upstream Gtk+ no longer supports it
                    as of version 2.18.
                    </para></listitem>
                <listitem><para><emphasis><filename>libxfontcache / xfontcacheproto</filename>:</emphasis>
                    Removed because they were removed from the Xorg server in 2008.
                    </para></listitem>
                <listitem><para><emphasis><filename>libxp / libxprintapputil / libxprintutil / printproto</filename>:</emphasis>
                    Removed because the XPrint server was removed from
                    Xorg in 2008.
                    </para></listitem>
                <listitem><para><emphasis><filename>libxtrap / xtrapproto</filename>:</emphasis>
                    Removed because their functionality was broken upstream.
                    </para></listitem>
                <listitem><para><emphasis>linux-yocto 3.0 kernel:</emphasis>
                    Removed with linux-yocto 3.8 kernel being added.
                    The linux-yocto 3.2 and linux-yocto 3.4 kernels remain
                    as part of the release.
                    </para></listitem>
                <listitem><para><emphasis><filename>lsbsetup</filename>:</emphasis>
                    Removed with functionality now provided by
                    <filename>lsbtest</filename>.
                    </para></listitem>
                <listitem><para><emphasis><filename>matchbox-stroke</filename>:</emphasis>
                    Removed because it was never more than a proof-of-concept.
                    </para></listitem>
                <listitem><para><emphasis><filename>matchbox-wm-2 / matchbox-theme-sato-2</filename>:</emphasis>
                    Removed because they are not maintained.
                    However, <filename>matchbox-wm</filename> and
                    <filename>matchbox-theme-sato</filename> are still
                    provided.
                    </para></listitem>
                <listitem><para><emphasis><filename>mesa-dri</filename>:</emphasis>
                    Renamed to <filename>mesa</filename>.
                    </para></listitem>
                <listitem><para><emphasis><filename>mesa-xlib</filename>:</emphasis>
                    Removed because it was no longer useful.
                    </para></listitem>
                <listitem><para><emphasis><filename>mutter</filename>:</emphasis>
                    Removed because nothing ever uses it and the recipe is
                    very old.
                    </para></listitem>
                <listitem><para><emphasis><filename>orinoco-conf</filename>:</emphasis>
                    Removed because it has become obsolete.
                    </para></listitem>
                <listitem><para><emphasis><filename>update-modules</filename>:</emphasis>
                    Removed because it is no longer used.
                    The kernel module <filename>postinstall</filename> and
                    <filename>postrm</filename> scripts can now do the same
                    task without the use of this script.
                    </para></listitem>
                <listitem><para><emphasis><filename>web</filename>:</emphasis>
                    Removed because it is not maintained.  Superseded by
                    <filename>web-webkit</filename>.
                    </para></listitem>
                <listitem><para><emphasis><filename>xf86bigfontproto</filename>:</emphasis>
                    Removed because upstream it has been disabled by default
                    since 2007.
                    Nothing uses <filename>xf86bigfontproto</filename>.
                    </para></listitem>
                <listitem><para><emphasis><filename>xf86rushproto</filename>:</emphasis>
                    Removed because its dependency in
                    <filename>xserver</filename> was spurious and it was
                    removed in 2005.
                    </para></listitem>
                <listitem><para><emphasis><filename>zypper / libzypp / sat-solver</filename>:</emphasis>
                    Removed and been functionally replaced with Smart
                    (<filename>python-smartpm</filename>) when RPM packaging
                    is used and package management is enabled on the target.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>
</section>

<section id='moving-to-the-yocto-project-1.5-release'>
    <title>Moving to the Yocto Project 1.5 Release</title>

    <para>
        This section provides migration information for moving to the
        Yocto Project 1.5 Release from the prior release.
    </para>

    <section id='migration-1.5-host-dependency-changes'>
        <title>Host Dependency Changes</title>

        <para>
            The OpenEmbedded build system now has some additional requirements
            on the host system:
            <itemizedlist>
                <listitem><para>Python 2.7.3+</para></listitem>
                <listitem><para>Tar 1.24+</para></listitem>
                <listitem><para>Git 1.7.8+</para></listitem>
                <listitem><para>Patched version of Make if you are using
                    3.82.
                    Most distributions that provide Make 3.82 use the patched
                    version.</para></listitem>
            </itemizedlist>
            If the Linux distribution you are using on your build host
            does not provide packages for these, you can install and use
            the Buildtools tarball, which provides an SDK-like environment
            containing them.
        </para>

        <para>
            For more information on this requirement, see the
            "<link linkend='required-git-tar-and-python-versions'>Required Git, tar, and Python Versions</link>"
            section.
        </para>
    </section>

    <section id='migration-1.5-atom-pc-bsp'>
        <title><filename>atom-pc</filename> Board Support Package (BSP)</title>

        <para>
            The <filename>atom-pc</filename> hardware reference BSP has been
            replaced by a <filename>genericx86</filename> BSP.
            This BSP is not necessarily guaranteed to work on all x86
            hardware, but it will run on a wider range of systems than the
            <filename>atom-pc</filename> did.
            <note>
                Additionally, a <filename>genericx86-64</filename> BSP has
                been added for 64-bit Atom systems.
            </note>
        </para>
    </section>

    <section id='migration-1.5-bitbake'>
        <title>BitBake</title>

        <para>
            The following changes have been made that relate to BitBake:
            <itemizedlist>
                <listitem><para>
                    BitBake now supports a <filename>_remove</filename>
                    operator.
                    The addition of this operator means you will have to
                    rename any items in recipe space (functions, variables)
                    whose names currently contain
                    <filename>_remove_</filename> or end with
                    <filename>_remove</filename> to avoid unexpected behavior.
                    </para></listitem>
                <listitem><para>
                    BitBake's global method pool has been removed.
                    This method is not particularly useful and led to clashes
                    between recipes containing functions that had the
                    same name.</para></listitem>
                <listitem><para>
                    The "none" server backend has been removed.
                    The "process" server backend has been serving well as the
                    default for a long time now.</para></listitem>
                <listitem><para>
                    The <filename>bitbake-runtask</filename> script has been
                    removed.</para></listitem>
                <listitem><para>
                    <filename>${</filename><link linkend='var-P'><filename>P</filename></link><filename>}</filename>
                    and
                    <filename>${</filename><link linkend='var-PF'><filename>PF</filename></link><filename>}</filename>
                    are no longer added to
                    <link linkend='var-PROVIDES'><filename>PROVIDES</filename></link>
                    by default in <filename>bitbake.conf</filename>.
                    These version-specific <filename>PROVIDES</filename>
                    items were seldom used.
                    Attempting to use them could result in two versions being
                    built simultaneously rather than just one version due to
                    the way BitBake resolves dependencies.</para></listitem>
            </itemizedlist>
        </para>
    </section>

    <section id='migration-1.5-qa-warnings'>
        <title>QA Warnings</title>

        <para>
            The following changes have been made to the package QA checks:
            <itemizedlist>
                <listitem><para>
                    If you have customized
                    <link linkend='var-ERROR_QA'><filename>ERROR_QA</filename></link>
                    or <link linkend='var-WARN_QA'><filename>WARN_QA</filename></link>
                    values in your configuration, check that they contain all of
                    the issues that you wish to be reported.
                    Previous Yocto Project versions contained a bug that meant
                    that any item not mentioned in <filename>ERROR_QA</filename>
                    or <filename>WARN_QA</filename> would be treated as a
                    warning.
                    Consequently, several important items were not already in
                    the default value of <filename>WARN_QA</filename>.
                    All of the possible QA checks are now documented in the
                    "<link linkend='ref-classes-insane'><filename>insane.bbclass</filename></link>"
                    section.</para></listitem>
                <listitem><para>
                    An additional QA check has been added to check if
                    <filename>/usr/share/info/dir</filename> is being installed.
                    Your recipe should delete this file within
                    <link linkend='ref-tasks-install'><filename>do_install</filename></link>
                    if "make install" is installing it.
                    </para></listitem>
                <listitem><para>
                    If you are using the buildhistory class, the check for the
                    package version going backwards is now controlled using a
                    standard QA check.
                    Thus, if you have customized your
                    <filename>ERROR_QA</filename> or
                    <filename>WARN_QA</filename> values and still wish to have
                    this check performed, you should add
                    "version-going-backwards" to your value for one or the
                    other variables depending on how you wish it to be handled.
                    See the documented QA checks in the
                    "<link linkend='ref-classes-insane'><filename>insane.bbclass</filename></link>"
                    section.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>

    <section id='migration-1.5-directory-layout-changes'>
        <title>Directory Layout Changes</title>

        <para>
            The following directory changes exist:
            <itemizedlist>
                <listitem><para>
                    Output SDK installer files are now named to include the
                    image name and tuning architecture through the
                    <link linkend='var-SDK_NAME'><filename>SDK_NAME</filename></link>
                    variable.</para></listitem>
                <listitem><para>
                    Images and related files are now installed into a directory
                    that is specific to the machine, instead of a parent
                    directory containing output files for multiple machines.
                    The
                    <link linkend='var-DEPLOY_DIR_IMAGE'><filename>DEPLOY_DIR_IMAGE</filename></link>
                    variable continues to point to the directory containing
                    images for the current
                    <link linkend='var-MACHINE'><filename>MACHINE</filename></link>
                    and should be used anywhere there is a need to refer to
                    this directory.
                    The <filename>runqemu</filename> script now uses this
                    variable to find images and kernel binaries and will use
                    BitBake to determine the directory.
                    Alternatively, you can set the
                    <filename>DEPLOY_DIR_IMAGE</filename> variable in the
                    external environment.</para></listitem>
                <listitem><para>
                    When buildhistory is enabled, its output is now written
                    under the
                    <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
                    rather than
                    <link linkend='var-TMPDIR'><filename>TMPDIR</filename></link>.
                    Doing so makes it easier to delete
                    <filename>TMPDIR</filename> and preserve the build history.
                    Additionally, data for produced SDKs is now split by
                    <link linkend='var-IMAGE_NAME'><filename>IMAGE_NAME</filename></link>.
                    </para></listitem>
                <listitem><para>
                    The <filename>pkgdata</filename> directory produced as
                    part of the packaging process has been collapsed into a
                    single machine-specific directory.
                    This directory is located under
                    <filename>sysroots</filename> and uses a machine-specific
                    name (i.e.
                    <filename>tmp/sysroots/<replaceable>machine</replaceable>/pkgdata</filename>).
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>

    <section id='migration-1.5-shortened-git-srcrev-values'>
        <title>Shortened Git <filename>SRCREV</filename> Values</title>

        <para>
            BitBake will now shorten revisions from Git repositories from the
            normal 40 characters down to 10 characters within
            <link linkend='var-SRCPV'><filename>SRCPV</filename></link>
            for improved usability in path and file names.
            This change should be safe within contexts where these revisions
            are used because the chances of spatially close collisions
            is very low.
            Distant collisions are not a major issue in the way
            the values are used.
        </para>
    </section>

    <section id='migration-1.5-image-features'>
        <title><filename>IMAGE_FEATURES</filename></title>

        <para>
            The following changes have been made that relate to
            <link linkend='var-IMAGE_FEATURES'><filename>IMAGE_FEATURES</filename></link>:
            <itemizedlist>
                <listitem><para>
                    The value of
                    <link linkend='var-IMAGE_FEATURES'><filename>IMAGE_FEATURES</filename></link>
                    is now validated to ensure invalid feature items are not
                    added.
                    Some users mistakenly add package names to this variable
                    instead of using
                    <link linkend='var-IMAGE_INSTALL'><filename>IMAGE_INSTALL</filename></link>
                    in order to have the package added to the image, which does
                    not work.
                    This change is intended to catch those kinds of situations.
                    Valid <filename>IMAGE_FEATURES</filename> are drawn from
                    <link linkend='var-PACKAGE_GROUP'><filename>PACKAGE_GROUP</filename></link>
                    definitions,
                    <link linkend='var-COMPLEMENTARY_GLOB'><filename>COMPLEMENTARY_GLOB</filename></link>
                    and a new "validitems" varflag on
                    <filename>IMAGE_FEATURES</filename>.
                    The "validitems" varflag change allows additional features
                    to be added if they are not provided using the previous
                    two mechanisms.
                    </para></listitem>
                <listitem><para>
                    The previously deprecated "apps-console-core"
                    <filename>IMAGE_FEATURES</filename> item is no longer
                    supported.
                    Add "splash" to <filename>IMAGE_FEATURES</filename> if you
                    wish to have the splash screen enabled, since this is
                    all that apps-console-core was doing.</para></listitem>
            </itemizedlist>
        </para>
    </section>

    <section id='migration-1.5-run'>
        <title><filename>/run</filename></title>

        <para>
            The <filename>/run</filename> directory from the Filesystem
            Hierarchy Standard 3.0 has been introduced.
            You can find some of the implications for this change
            <ulink url='http://cgit.openembedded.org/openembedded-core/commit/?id=0e326280a15b0f2c4ef2ef4ec441f63f55b75873'>here</ulink>.
            The change also means that recipes that install files to
            <filename>/var/run</filename> must be changed.
            You can find a guide on how to make these changes
            <ulink url='http://permalink.gmane.org/gmane.comp.handhelds.openembedded/58530'>here</ulink>.
        </para>
    </section>

    <section id='migration-1.5-removal-of-package-manager-database-within-image-recipes'>
        <title>Removal of Package Manager Database Within Image Recipes</title>

        <para>
            The image <filename>core-image-minimal</filename> no longer adds
            <filename>remove_packaging_data_files</filename> to
            <link linkend='var-ROOTFS_POSTPROCESS_COMMAND'><filename>ROOTFS_POSTPROCESS_COMMAND</filename></link>.
            This addition is now handled automatically when "package-management"
            is not in
            <link linkend='var-IMAGE_FEATURES'><filename>IMAGE_FEATURES</filename></link>.
            If you have custom image recipes that make this addition,
            you should remove the lines, as they are not needed and might
            interfere with correct operation of postinstall scripts.
        </para>
    </section>

    <section id='migration-1.5-images-now-rebuild-only-on-changes-instead-of-every-time'>
        <title>Images Now Rebuild Only on Changes Instead of Every Time</title>

        <para>
            The
            <link linkend='ref-tasks-rootfs'><filename>do_rootfs</filename></link>
            and other related image
            construction tasks are no longer marked as "nostamp".
            Consequently, they will only be re-executed when their inputs have
            changed.
            Previous versions of the OpenEmbedded build system always rebuilt
            the image when requested rather when necessary.
        </para>
    </section>

    <section id='migration-1.5-task-recipes'>
        <title>Task Recipes</title>

        <para>
            The previously deprecated <filename>task.bbclass</filename> has
            now been dropped.
            For recipes that previously inherited from this class, you should
            rename them from <filename>task-*</filename> to
            <filename>packagegroup-*</filename> and inherit packagegroup
            instead.
        </para>

        <para>
            For more information, see the
            "<link linkend='ref-classes-packagegroup'><filename>packagegroup.bbclass</filename></link>"
            section.
        </para>
    </section>

    <section id='migration-1.5-busybox'>
        <title>BusyBox</title>

        <para>
            By default, we now split BusyBox into two binaries:
            one that is suid root for those components that need it, and
            another for the rest of the components.
            Splitting BusyBox allows for optimization that eliminates the
            <filename>tinylogin</filename> recipe as recommended by upstream.
            You can disable this split by setting
            <link linkend='var-BUSYBOX_SPLIT_SUID'><filename>BUSYBOX_SPLIT_SUID</filename></link>
            to "0".
        </para>
    </section>

    <section id='migration-1.5-automated-image-testing'>
        <title>Automated Image Testing</title>

        <para>
            A new automated image testing framework has been added
            through the
            <link linkend='ref-classes-testimage*'><filename>testimage.bbclass</filename></link>
            class.
            This framework replaces the older
            <filename>imagetest-qemu</filename> framework.
        </para>

        <para>
            You can learn more about performing automated image tests in the
            "<ulink url='&YOCTO_DOCS_DEV_URL;#performing-automated-runtime-testing'>Performing Automated Runtime Testing</ulink>"
            section.
        </para>
    </section>

    <section id='migration-1.5-build-history'>
        <title>Build History</title>

        <para>
            Following are changes to Build History:
            <itemizedlist>
                <listitem><para>
                     Installed package sizes:
                     <filename>installed-package-sizes.txt</filename> for an
                     image now records the size of the files installed by each
                     package instead of the size of each compressed package
                     archive file.</para></listitem>
                <listitem><para>
                    The dependency graphs (<filename>depends*.dot</filename>)
                    now use the actual package names instead of replacing
                    dashes, dots and plus signs with underscores.
                    </para></listitem>
                <listitem><para>
                    The <filename>buildhistory-diff</filename> and
                    <filename>buildhistory-collect-srcrevs</filename>
                    utilities have improved command-line handling.
                    Use the <filename>--help</filename> option for
                    each utility for more information on the new syntax.
                    </para></listitem>
            </itemizedlist>
            For more information on Build History, see the
            "<link linkend='maintaining-build-output-quality'>Maintaining Build Output Quality</link>"
            section.
        </para>
    </section>

    <section id='migration-1.5-udev'>
        <title><filename>udev</filename></title>

        <para>
            Following are changes to <filename>udev</filename>:
            <itemizedlist>
                <listitem><para>
                    <filename>udev</filename> no longer brings in
                    <filename>udev-extraconf</filename> automatically
                    through
                    <link linkend='var-RRECOMMENDS'><filename>RRECOMMENDS</filename></link>,
                    since this was originally intended to be optional.
                    If you need the extra rules, then add
                    <filename>udev-extraconf</filename> to your image.
                    </para></listitem>
                <listitem><para>
                    <filename>udev</filename> no longer brings in
                    <filename>pciutils-ids</filename> or
                    <filename>usbutils-ids</filename> through
                    <filename>RRECOMMENDS</filename>.
                    These are not needed by <filename>udev</filename> itself
                    and removing them saves around 350KB.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>

    <section id='migration-1.5-removed-renamed-recipes'>
        <title>Removed and Renamed Recipes</title>

        <itemizedlist>
            <listitem><para>
                The <filename>linux-yocto</filename> 3.2 kernel has been
                removed.</para></listitem>
            <listitem><para>
                <filename>libtool-nativesdk</filename> has been renamed to
                <filename>nativesdk-libtool</filename>.</para></listitem>
            <listitem><para>
                <filename>tinylogin</filename> has been removed.
                It has been replaced by a suid portion of Busybox.
                See the
                "<link linkend='migration-1.5-busybox'>BusyBox</link>" section
                for more information.</para></listitem>
            <listitem><para>
                <filename>external-python-tarball</filename> has been renamed
                to <filename>buildtools-tarball</filename>.
                </para></listitem>
            <listitem><para>
                <filename>web-webkit</filename> has been removed.
                It has been functionally replaced by
                <filename>midori</filename>.</para></listitem>
            <listitem><para>
                <filename>imake</filename> has been removed.
                It is no longer needed by any other recipe.
                </para></listitem>
            <listitem><para>
                <filename>transfig-native</filename> has been removed.
                It is no longer needed by any other recipe.
                </para></listitem>
            <listitem><para>
                <filename>anjuta-remote-run</filename> has been removed.
                Anjuta IDE integration has not been officially supported for
                several releases.</para></listitem>
        </itemizedlist>
    </section>

    <section id='migration-1.5-other-changes'>
        <title>Other Changes</title>

        <para>
            Following is a list of short entries describing other changes:
            <itemizedlist>
                <listitem><para>
                    <filename>run-postinsts</filename>: Make this generic.
                    </para></listitem>
                <listitem><para>
                    <filename>base-files</filename>: Remove the unnecessary
                    <filename>media/</filename><replaceable>xxx</replaceable> directories.
                    </para></listitem>
                <listitem><para>
                    <filename>alsa-state</filename>: Provide an empty
                    <filename>asound.conf</filename> by default.
                    </para></listitem>
                <listitem><para>
                    <filename>classes/image</filename>: Ensure
                    <link linkend='var-BAD_RECOMMENDATIONS'><filename>BAD_RECOMMENDATIONS</filename></link>
                    supports pre-renamed package names.</para></listitem>
                <listitem><para>
                    <filename>classes/rootfs_rpm</filename>: Implement
                    <link linkend='var-BAD_RECOMMENDATIONS'><filename>BAD_RECOMMENDATIONS</filename></link>
                    for RPM.</para></listitem>
                <listitem><para>
                    <filename>systemd</filename>: Remove
                    <filename>systemd_unitdir</filename> if
                    <filename>systemd</filename> is not in
                    <link linkend='var-DISTRO_FEATURES'><filename>DISTRO_FEATURES</filename></link>.
                    </para></listitem>
                <listitem><para>
                    <filename>systemd</filename>: Remove
                    <filename>init.d</filename> dir if
                    <filename>systemd</filename> unit file is present and
                    <filename>sysvinit</filename> is not a distro feature.
                    </para></listitem>
                <listitem><para>
                    <filename>libpam</filename>: Deny all services for the
                    <filename>OTHER</filename> entries.
                    </para></listitem>
                <listitem><para>
                    <filename>image.bbclass</filename>: Move
                    <filename>runtime_mapping_rename</filename> to avoid
                    conflict with <filename>multilib</filename>.
                    See
                    <ulink url='https://bugzilla.yoctoproject.org/show_bug.cgi?id=4993'><filename>YOCTO #4993</filename></ulink>
                    in Bugzilla for more information.
                    </para></listitem>
                <listitem><para>
                    <filename>linux-dtb</filename>: Use kernel build system
                    to generate the <filename>dtb</filename> files.
                    </para></listitem>
                <listitem><para>
                    <filename>kern-tools</filename>: Switch from guilt to
                    new <filename>kgit-s2q</filename> tool.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>
</section>

<section id='moving-to-the-yocto-project-1.6-release'>
    <title>Moving to the Yocto Project 1.6 Release</title>

    <para>
        This section provides migration information for moving to the
        Yocto Project 1.6 Release from the prior release.
    </para>


    <section id='migration-1.6-archiver-class'>
        <title><filename>archiver</filename> Class</title>

        <para>
            The
            <link linkend='ref-classes-archiver'><filename>archiver</filename></link>
            class has been rewritten and its configuration has been simplified.
            For more details on the source archiver, see the
            "<ulink url='&YOCTO_DOCS_DEV_URL;#maintaining-open-source-license-compliance-during-your-products-lifecycle'>Maintaining Open Source License Compliance During Your Product's Lifecycle</ulink>"
            section in the Yocto Project Development Manual.
        </para>
    </section>

    <section id='migration-1.6-packaging-changes'>
        <title>Packaging Changes</title>

        <para>
            The following packaging changes have been made:
            <itemizedlist>
                <listitem><para>
                    The <filename>binutils</filename> recipe no longer produces
                    a <filename>binutils-symlinks</filename> package.
                    <filename>update-alternatives</filename> is now used to
                    handle the preferred <filename>binutils</filename>
                    variant on the target instead.
                    </para></listitem>
                <listitem><para>
                    The tc (traffic control) utilities have been split out of
                    the main <filename>iproute2</filename> package and put
                    into the <filename>iproute2-tc</filename> package.
                    </para></listitem>
                <listitem><para>
                    The <filename>gtk-engines</filename> schemas have been
                    moved to a dedicated
                    <filename>gtk-engines-schemas</filename> package.
                    </para></listitem>
                <listitem><para>
                    The <filename>armv7a</filename> with thumb package
                    architecture suffix has changed.
                    The suffix for these packages with the thumb
                    optimization enabled is "t2" as it should be.
                    Use of this suffix was not the case in the 1.5 release.
                    Architecture names will change within package feeds as a
                    result.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>

    <section id='migration-1.6-bitbake'>
        <title>BitBake</title>

        <para>
            The following changes have been made to
            <ulink url='&YOCTO_DOCS_DEV_URL;#bitbake-term'>BitBake</ulink>.
        </para>

        <section id='migration-1.6-matching-branch-requirement-for-git-fetching'>
            <title>Matching Branch Requirement for Git Fetching</title>

            <para>
                When fetching source from a Git repository using
                <link linkend='var-SRC_URI'><filename>SRC_URI</filename></link>,
                BitBake will now validate the
                <link linkend='var-SRCREV'><filename>SRCREV</filename></link>
                value against the branch.
                You can specify the branch using the following form:
                <literallayout class='monospaced'>
     SRC_URI = "git://server.name/repository;branch=<replaceable>branchname</replaceable>"
                </literallayout>
                If you do not specify a branch, BitBake looks
                in the default "master" branch.
            </para>

            <para>
                Alternatively, if you need to bypass this check (e.g.
                if you are fetching a revision corresponding to a tag that
                is not on any branch), you can add ";nobranch=1" to
                the end of the URL within <filename>SRC_URI</filename>.
            </para>
        </section>

        <section id='migration-1.6-bitbake-deps'>
            <title>Python Definition substitutions</title>

            <para>
                BitBake had some previously deprecated Python definitions
                within its <filename>bb</filename> module removed.
                You should use their sub-module counterparts instead:
                <itemizedlist>
                    <listitem><para><filename>bb.MalformedUrl</filename>:
                        Use <filename>bb.fetch.MalformedUrl</filename>.
                        </para></listitem>
                    <listitem><para><filename>bb.encodeurl</filename>:
                        Use <filename>bb.fetch.encodeurl</filename>.
                        </para></listitem>
                    <listitem><para><filename>bb.decodeurl</filename>:
                        Use <filename>bb.fetch.decodeurl</filename>
                        </para></listitem>
                    <listitem><para><filename>bb.mkdirhier</filename>:
                        Use <filename>bb.utils.mkdirhier</filename>.
                        </para></listitem>
                    <listitem><para><filename>bb.movefile</filename>:
                        Use <filename>bb.utils.movefile</filename>.
                        </para></listitem>
                    <listitem><para><filename>bb.copyfile</filename>:
                        Use <filename>bb.utils.copyfile</filename>.
                        </para></listitem>
                    <listitem><para><filename>bb.which</filename>:
                        Use <filename>bb.utils.which</filename>.
                        </para></listitem>
                    <listitem><para><filename>bb.vercmp_string</filename>:
                        Use <filename>bb.utils.vercmp_string</filename>.
                        </para></listitem>
                    <listitem><para><filename>bb.vercmp</filename>:
                        Use <filename>bb.utils.vercmp</filename>.
                        </para></listitem>
                </itemizedlist>
            </para>
        </section>

        <section id='migration-1.6-bitbake-fetcher'>
            <title>SVK Fetcher</title>

            <para>
                The SVK fetcher has been removed from BitBake.
            </para>
        </section>

        <section id='migration-1.6-bitbake-console-output'>
            <title>Console Output Error Redirection</title>

            <para>
                The BitBake console UI will now output errors to
                <filename>stderr</filename> instead of
                <filename>stdout</filename>.
                Consequently, if you are piping or redirecting the output of
                <filename>bitbake</filename> to somewhere else, and you wish
                to retain the errors, you will need to add
                <filename>2>&amp;1</filename> (or something similar) to the
                end of your <filename>bitbake</filename> command line.
            </para>
        </section>

        <section id='migration-1.6-task-taskname-overrides'>
            <title><filename>task-</filename><replaceable>taskname</replaceable> Overrides</title>

            <para>
                <filename>task-</filename><replaceable>taskname</replaceable> overrides have been
                adjusted so that tasks whose names contain underscores have the
                underscores replaced by hyphens for the override so that they
                now function properly.
                For example, the task override for
                <link linkend='ref-tasks-populate_sdk'><filename>do_populate_sdk</filename></link>
                is <filename>task-populate-sdk</filename>.
            </para>
        </section>
    </section>

    <section id='migration-1.6-variable-changes'>
        <title>Changes to Variables</title>

        <para>
            The following variables have changed.
            For information on the OpenEmbedded build system variables, see the
            "<link linkend='ref-variables-glos'>Variables Glossary</link>" Chapter.
        </para>

        <section id='migration-1.6-variable-changes-TMPDIR'>
            <title><filename>TMPDIR</filename></title>

            <para>
                <link linkend='var-TMPDIR'><filename>TMPDIR</filename></link>
                can no longer be on an NFS mount.
                NFS does not offer full POSIX locking and inode consistency
                and can cause unexpected issues if used to store
                <filename>TMPDIR</filename>.
            </para>

            <para>
                The check for this occurs on startup.
                If <filename>TMPDIR</filename> is detected on an NFS mount,
                an error occurs.
            </para>
        </section>

        <section id='migration-1.6-variable-changes-PRINC'>
            <title><filename>PRINC</filename></title>

            <para>
                The <filename>PRINC</filename>
                variable has been deprecated and triggers a warning if
                detected during a build.
                For
                <link linkend='var-PR'><filename>PR</filename></link>
                increments on changes, use the PR service instead.
                You can find out more about this service in the
                "<ulink url='&YOCTO_DOCS_DEV_URL;#working-with-a-pr-service'>Working With a PR Service</ulink>"
                section in the Yocto Project Development Manual.
            </para>
        </section>

        <section id='migration-1.6-variable-changes-IMAGE_TYPES'>
            <title><filename>IMAGE_TYPES</filename></title>

            <para>
                The "sum.jffs2" option for
                <link linkend='var-IMAGE_TYPES'><filename>IMAGE_TYPES</filename></link>
                has been replaced by the "jffs2.sum" option, which fits the
                processing order.
            </para>
        </section>

        <section id='migration-1.6-variable-changes-COPY_LIC_MANIFEST'>
            <title><filename>COPY_LIC_MANIFEST</filename></title>

            <para>
                The
                <link linkend='var-COPY_LIC_MANIFEST'><filename>COPY_LIC_MANIFEST</filename></link>
                variable must
                now be set to "1" rather than any value in order to enable
                it.
            </para>
        </section>

        <section id='migration-1.6-variable-changes-COPY_LIC_DIRS'>
            <title><filename>COPY_LIC_DIRS</filename></title>

            <para>
                The
                <link linkend='var-COPY_LIC_DIRS'><filename>COPY_LIC_DIRS</filename></link>
                variable must
                now be set to "1" rather than any value in order to enable
                it.
            </para>
        </section>

        <section id='migration-1.6-variable-changes-PACKAGE_GROUP'>
            <title><filename>PACKAGE_GROUP</filename></title>

            <para>
                The
                <link linkend='var-PACKAGE_GROUP'><filename>PACKAGE_GROUP</filename></link>
                variable has been renamed to
                <link linkend='var-FEATURE_PACKAGES'><filename>FEATURE_PACKAGES</filename></link>
                to more accurately reflect its purpose.
                You can still use <filename>PACKAGE_GROUP</filename> but
                the OpenEmbedded build system produces a warning message when
                it encounters the variable.
            </para>
        </section>

        <section id='migration-1.6-variable-changes-variable-entry-behavior'>
            <title>Preprocess and Post Process Command Variable Behavior</title>

            <para>
                The following variables now expect a semicolon separated
                list of functions to call and not arbitrary shell commands:
                <literallayout class='monospaced'>
     <link linkend='var-ROOTFS_PREPROCESS_COMMAND'>ROOTFS_PREPROCESS_COMMAND</link>
     <link linkend='var-ROOTFS_POSTPROCESS_COMMAND'>ROOTFS_POSTPROCESS_COMMAND</link>
     <link linkend='var-SDK_POSTPROCESS_COMMAND'>SDK_POSTPROCESS_COMMAND</link>
     <link linkend='var-POPULATE_SDK_POST_TARGET_COMMAND'>POPULATE_SDK_POST_TARGET_COMMAND</link>
     <link linkend='var-POPULATE_SDK_POST_HOST_COMMAND'>POPULATE_SDK_POST_HOST_COMMAND</link>
     <link linkend='var-IMAGE_POSTPROCESS_COMMAND'>IMAGE_POSTPROCESS_COMMAND</link>
     <link linkend='var-IMAGE_PREPROCESS_COMMAND'>IMAGE_PREPROCESS_COMMAND</link>
     <link linkend='var-ROOTFS_POSTUNINSTALL_COMMAND'>ROOTFS_POSTUNINSTALL_COMMAND</link>
     <link linkend='var-ROOTFS_POSTINSTALL_COMMAND'>ROOTFS_POSTINSTALL_COMMAND</link>
                </literallayout>
                For migration purposes, you can simply wrap shell commands in
                a shell function and then call the function.
                Here is an example:
                <literallayout class='monospaced'>
     my_postprocess_function() {
        echo "hello" > ${IMAGE_ROOTFS}/hello.txt
     }
     ROOTFS_POSTPROCESS_COMMAND += "my_postprocess_function; "
                </literallayout>
            </para>
        </section>
    </section>

    <section id='migration-1.6-directory-layout-changes'>
        <title>Directory Layout Changes</title>

        <para>
            The <filename>meta-hob</filename> layer has been removed from
            the top-level of the
            <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>.
            The contents of this layer are no longer needed by the Hob
            user interface for building images and toolchains.
        </para>
    </section>

    <section id='migration-1.6-package-test-ptest'>
        <title>Package Test (ptest)</title>

        <para>
            Package Tests (ptest) are built but not installed by default.
            For information on using Package Tests, see the
            "<ulink url='&YOCTO_DOCS_DEV_URL;#testing-packages-with-ptest'>Setting up and running package test (ptest)</ulink>"
            section in the Yocto Project Development Manual.
            For information on the <filename>ptest</filename> class, see the
            "<link linkend='ref-classes-ptest'><filename>ptest.bbclass</filename></link>"
            section.
        </para>
    </section>

    <section id='migration-1.6-build-changes'>
        <title>Build Changes</title>

        <para>
            Separate build and source directories have been enabled
            by default for selected recipes where it is known to work
            (a whitelist) and for all recipes that inherit the
            <link linkend='ref-classes-cmake'><filename>cmake</filename></link>
            class.
            In future releases the
            <link linkend='ref-classes-autotools'><filename>autotools</filename></link>
            class will enable a separate build directory by default as
            well.
            Recipes building Autotools-based
            software that fails to build with a separate build directory
            should be changed to inherit from the
            <link linkend='ref-classes-autotools'><filename>autotools-brokensep</filename></link>
            class instead of the <filename>autotools</filename> or
            <filename>autotools_stage</filename>classes.
        </para>
    </section>

    <section id='migration-1.6-building-qemu-native'>
        <title><filename>qemu-native</filename></title>

        <para>
            <filename>qemu-native</filename> now builds without
            SDL-based graphical output support by default.
            The following additional lines are needed in your
            <filename>local.conf</filename> to enable it:
            <literallayout class='monospaced'>
     PACKAGECONFIG_pn-qemu-native = "sdl"
     ASSUME_PROVIDED += "libsdl-native"
            </literallayout>
            <note>
                The default <filename>local.conf</filename>
                contains these statements.
                Consequently, if you are building a headless system and using
                a default <filename>local.conf</filename> file, you will need
                comment these two lines out.
            </note>
        </para>
    </section>

    <section id='migration-1.6-core-image-basic'>
        <title><filename>core-image-basic</filename></title>

        <para>
            <filename>core-image-basic</filename> has been renamed to
            <filename>core-image-full-cmdline</filename>.
        </para>

        <para>
            In addition to <filename>core-image-basic</filename> being renamed,
            <filename>packagegroup-core-basic</filename> has been renamed to
            <filename>packagegroup-core-full-cmdline</filename> to match.
        </para>
    </section>

    <section id='migration-1.6-licensing'>
        <title>Licensing</title>

        <para>
            The top-level <filename>LICENSE</filename> file has been changed
            to better describe the license of the various components of
            OE-Core.
            However, the licensing itself remains unchanged.
        </para>

        <para>
            Normally, this change would not cause any side-effects.
            However, some recipes point to this file within
            <link linkend='var-LIC_FILES_CHKSUM'><filename>LIC_FILES_CHKSUM</filename></link>
            (as <filename>${COREBASE}/LICENSE</filename>) and thus the
            accompanying checksum must be changed from
            3f40d7994397109285ec7b81fdeb3b58 to
            4d92cd373abda3937c2bc47fbc49d690.
            A better alternative is to have
            <filename>LIC_FILES_CHKSUM</filename> point to a file
            describing the license that is distributed with the source
            that the recipe is building, if possible, rather than pointing
            to <filename>${COREBASE}/LICENSE</filename>.
        </para>
    </section>

    <section id='migration-1.6-cflags-options'>
        <title><filename>CFLAGS</filename> Options</title>

        <para>
            The "-fpermissive" option has been removed from the default
            <link linkend='var-CFLAGS'><filename>CFLAGS</filename></link>
            value.
            You need to take action on individual recipes that fail when
            building with this option.
            You need to either patch the recipes to fix the issues reported by
            the compiler, or you need to add "-fpermissive" to
            <filename>CFLAGS</filename> in the recipes.
        </para>
    </section>

    <section id='migration-1.6-custom-images'>
        <title>Custom Image Output Types</title>

        <para>
            Custom image output types, as selected using
            <link linkend='var-IMAGE_FSTYPES'><filename>IMAGE_FSTYPES</filename></link>,
            must declare their dependencies on other image types (if any) using
            a new
            <link linkend='var-IMAGE_TYPEDEP'><filename>IMAGE_TYPEDEP</filename></link>
            variable.
        </para>
    </section>

    <section id='migration-1.6-do-package-write-task'>
        <title>Tasks</title>

        <para>
            The <filename>do_package_write</filename> task has been removed.
            The task is no longer needed.
        </para>
    </section>

    <section id='migration-1.6-update-alternatives-provider'>
        <title><filename>update-alternative</filename> Provider</title>

        <para>
            The default <filename>update-alternatives</filename> provider has
            been changed from <filename>opkg</filename> to
            <filename>opkg-utils</filename>.
            This change resolves some troublesome circular dependencies.
            The runtime package has also been renamed from
            <filename>update-alternatives-cworth</filename>
            to <filename>update-alternatives-opkg</filename>.
        </para>
    </section>

    <section id='migration-1.6-virtclass-overrides'>
        <title><filename>virtclass</filename> Overrides</title>

        <para>
            The <filename>virtclass</filename> overrides are now deprecated.
            Use the equivalent class overrides instead (e.g.
            <filename>virtclass-native</filename> becomes
            <filename>class-native</filename>.)
        </para>
    </section>

    <section id='migration-1.6-removed-renamed-recipes'>
        <title>Removed and Renamed Recipes</title>

        <para>
            The following recipes have been removed:
            <itemizedlist>
                <listitem><para><filename>packagegroup-toolset-native</filename> -
                    This recipe is largely unused.
                    </para></listitem>
                <listitem><para><filename>linux-yocto-3.8</filename> -
                    Support for the Linux yocto 3.8 kernel has been dropped.
                    Support for the 3.10 and 3.14 kernels have been added
                    with the <filename>linux-yocto-3.10</filename> and
                    <filename>linux-yocto-3.14</filename> recipes.
                    </para></listitem>
                <listitem><para><filename>ocf-linux</filename> -
                    This recipe has been functionally replaced using
                    <filename>cryptodev-linux</filename>.
                    </para></listitem>
                <listitem><para><filename>genext2fs</filename> -
                    <filename>genext2fs</filename> is no longer used by the
                    build system and is unmaintained upstream.
                    </para></listitem>
                <listitem><para><filename>js</filename> -
                    This provided an ancient version of Mozilla's javascript
                    engine that is no longer needed.
                    </para></listitem>
                <listitem><para><filename>zaurusd</filename> -
                    The recipe has been moved to the
                    <filename>meta-handheld</filename> layer.
                    </para></listitem>
                <listitem><para><filename>eglibc 2.17</filename> -
                    Replaced by the <filename>eglibc 2.19</filename>
                    recipe.
                    </para></listitem>
                <listitem><para><filename>gcc 4.7.2</filename> -
                    Replaced by the now stable
                    <filename>gcc 4.8.2</filename>.
                    </para></listitem>
                <listitem><para><filename>external-sourcery-toolchain</filename> -
                    this recipe is now maintained in the
                    <filename>meta-sourcery</filename> layer.
                    </para></listitem>
                <listitem><para><filename>linux-libc-headers-yocto 3.4+git</filename> -
                    Now using version 3.10 of the
                    <filename>linux-libc-headers</filename> by default.
                    </para></listitem>
                <listitem><para><filename>meta-toolchain-gmae</filename> -
                    This recipe is obsolete.
                    </para></listitem>
                <listitem><para><filename>packagegroup-core-sdk-gmae</filename> -
                    This recipe is obsolete.
                    </para></listitem>
                <listitem><para><filename>packagegroup-core-standalone-gmae-sdk-target</filename> -
                    This recipe is obsolete.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>

    <section id='migration-1.6-removed-classes'>
        <title>Removed Classes</title>

        <para>
            The following classes have become obsolete and have been removed:
            <itemizedlist>
                <listitem><para><filename>module_strip</filename>
                    </para></listitem>
                <listitem><para><filename>pkg_metainfo</filename>
                    </para></listitem>
                <listitem><para><filename>pkg_distribute</filename>
                    </para></listitem>
                <listitem><para><filename>image-empty</filename>
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>

    <section id='migration-1.6-reference-bsps'>
        <title>Reference Board Support Packages (BSPs)</title>

        <para>
            The following reference BSPs changes occurred:
            <itemizedlist>
                <listitem><para>The BeagleBoard
                    (<filename>beagleboard</filename>) ARM reference hardware
                    has been replaced by the BeagleBone
                    (<filename>beaglebone</filename>) hardware.
                    </para></listitem>
                <listitem><para>The RouterStation Pro
                    (<filename>routerstationpro</filename>) MIPS reference
                    hardware has been replaced by the EdgeRouter Lite
                    (<filename>edgerouter</filename>) hardware.
                    </para></listitem>
            </itemizedlist>
            The previous reference BSPs for the
            <filename>beagleboard</filename> and
            <filename>routerstationpro</filename> machines are still available
            in a new <filename>meta-yocto-bsp-old</filename> layer in the
            <ulink url='&YOCTO_GIT_URL;'>Source Repositories</ulink>
            at
            <ulink url='http://git.yoctoproject.org/cgit/cgit.cgi/meta-yocto-bsp-old/'>http://git.yoctoproject.org/cgit/cgit.cgi/meta-yocto-bsp-old/</ulink>.
        </para>
    </section>
</section>

<section id='moving-to-the-yocto-project-1.7-release'>
    <title>Moving to the Yocto Project 1.7 Release</title>

    <para>
        This section provides migration information for moving to the
        Yocto Project 1.7 Release from the prior release.
    </para>

    <section id='migration-1.7-changes-to-setting-qemu-packageconfig-options'>
        <title>Changes to Setting QEMU <filename>PACKAGECONFIG</filename> Options in <filename>local.conf</filename></title>

        <para>
            The QEMU recipe now uses a number of
            <link linkend='var-PACKAGECONFIG'><filename>PACKAGECONFIG</filename></link>
            options to enable various optional features.
            The method used to set defaults for these options means that
            existing
            <filename>local.conf</filename> files will need to be be
            modified to append to <filename>PACKAGECONFIG</filename> for
            <filename>qemu-native</filename> and
            <filename>nativesdk-qemu</filename> instead of setting it.
            In other words, to enable graphical output for QEMU, you should
            now have these lines in <filename>local.conf</filename>:
            <literallayout class='monospaced'>
     PACKAGECONFIG_append_pn-qemu-native = " sdl"
     PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
            </literallayout>
        </para>
    </section>

    <section id='migration-1.7-minimum-git-version'>
        <title>Minimum Git version</title>

        <para>
            The minimum
            <ulink url='&YOCTO_DOCS_DEV_URL;#git'>Git</ulink> version required
            on the build host is now 1.7.8 because the
            <filename>--list</filename> option is now required by
            BitBake's Git fetcher.
            As always, if your host distribution does not provide a version of
            Git that meets this requirement, you can use the
            <filename>buildtools-tarball</filename> that does.
            See the
            "<link linkend='required-git-tar-and-python-versions'>Required Git, tar, and Python Versions</link>"
            section for more information.
        </para>
    </section>

    <section id='migration-1.7-autotools-class-changes'>
        <title>Autotools Class Changes</title>

        <para>
            The following
            <link linkend='ref-classes-autotools'><filename>autotools</filename></link>
            class changes occurred:
            <itemizedlist>
                <listitem><para><emphasis>
                    A separate build directory is now used by default:</emphasis>
                    The <filename>autotools</filename> class has been changed
                    to use a directory for building
                    (<link linkend='var-B'><filename>B</filename></link>),
                    which is separate from the source directory
                    (<link linkend='var-S'><filename>S</filename></link>).
                    This is commonly referred to as
                    <filename>B != S</filename>, or an out-of-tree build.</para>
                    <para>If the software being built is already capable of
                    building in a directory separate from the source, you
                    do not need to do anything.
                    However, if the software is not capable of being built
                    in this manner, you will
                    need to either patch the software so that it can build
                    separately, or you will need to change the recipe to
                    inherit the
                    <link linkend='ref-classes-autotools'><filename>autotools-brokensep</filename></link>
                    class instead of the <filename>autotools</filename> or
                    <filename>autotools_stage</filename> classes.
                    </para></listitem>
                <listitem><para><emphasis>
                    The <filename>--foreign</filename> option is
                    no longer passed to <filename>automake</filename> when
                    running <filename>autoconf</filename>:</emphasis>
                    This option tells <filename>automake</filename> that a
                    particular software package does not follow the GNU
                    standards and therefore should not be expected
                    to distribute certain files such as
                    <filename>ChangeLog</filename>,
                    <filename>AUTHORS</filename>, and so forth.
                    Because the majority of upstream software packages already
                    tell <filename>automake</filename> to enable foreign mode
                    themselves, the option is mostly superfluous.
                    However, some recipes will need patches for this change.
                    You can easily make the change by patching
                    <filename>configure.ac</filename> so that it passes
                    "foreign" to <filename>AM_INIT_AUTOMAKE()</filename>.
                    See
                    <ulink url='http://cgit.openembedded.org/openembedded-core/commit/?id=01943188f85ce6411717fb5bf702d609f55813f2'>this commit</ulink>
                    for an example showing how to make the patch.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>

    <section id='migration-1.7-binary-configuration-scripts-disabled'>
        <title>Binary Configuration Scripts Disabled</title>

        <para>
            Some of the core recipes that package binary configuration scripts
            now disable the scripts due to the
            scripts previously requiring error-prone path substitution.
            Software that links against these libraries using these scripts
            should use the much more robust <filename>pkg-config</filename>
            instead.
            The list of recipes changed in this version (and their
            configuration scripts) is as follows:
            <literallayout class='monospaced'>
     directfb (directfb-config)
     freetype (freetype-config)
     gpgme (gpgme-config)
     libassuan (libassuan-config)
     libcroco (croco-6.0-config)
     libgcrypt (libgcrypt-config)
     libgpg-error (gpg-error-config)
     libksba (ksba-config)
     libpcap (pcap-config)
     libpcre (pcre-config)
     libpng (libpng-config, libpng16-config)
     libsdl (sdl-config)
     libusb-compat (libusb-config)
     libxml2 (xml2-config)
     libxslt (xslt-config)
     ncurses (ncurses-config)
     neon (neon-config)
     npth (npth-config)
     pth (pth-config)
     taglib (taglib-config)
            </literallayout>
            Additionally, support for <filename>pkg-config</filename> has been
            added to some recipes in the previous list in the rare cases
            where the upstream software package does not already provide
            it.
        </para>
    </section>

    <section id='migration-1.7-glibc-replaces-eglibc'>
        <title><filename>eglibc 2.19</filename> Replaced with <filename>glibc 2.20</filename></title>

        <para>
            Because <filename>eglibc</filename> and
            <filename>glibc</filename> were already fairly close, this
            replacement should not require any significant changes to other
            software that links to <filename>eglibc</filename>.
            However, there were a number of minor changes in
            <filename>glibc 2.20</filename> upstream that could require
            patching some software (e.g. the removal of the
            <filename>_BSD_SOURCE</filename> feature test macro).
        </para>

        <para>
            <filename>glibc 2.20</filename> requires version 2.6.32 or greater
            of the Linux kernel.
            Thus, older kernels will no longer be usable in conjunction with it.
        </para>

        <para>
            For full details on the changes in <filename>glibc 2.20</filename>,
            see the upstream release notes
            <ulink url='https://sourceware.org/ml/libc-alpha/2014-09/msg00088.html'>here</ulink>.
        </para>
    </section>

    <section id='migration-1.7-kernel-module-autoloading'>
        <title>Kernel Module Autoloading</title>

        <para>
            The
            <link linkend='var-module_autoload'><filename>module_autoload_*</filename></link>
            variable is now deprecated and a new
            <link linkend='var-KERNEL_MODULE_AUTOLOAD'><filename>KERNEL_MODULE_AUTOLOAD</filename></link>
            variable should be used instead.
            Also,
            <link linkend='var-module_conf'><filename>module_conf_*</filename></link>
            must now be used in conjunction with a new
            <link linkend='var-KERNEL_MODULE_PROBECONF'><filename>KERNEL_MODULE_PROBECONF</filename></link>
            variable.
            The new variables no longer require you to specify the module name
            as part of the variable name.
            This change not only simplifies usage but also allows the values
            of these variables to be appropriately incorporated into task
            signatures and thus trigger the appropriate tasks to re-execute
            when changed.
            You should replace any references to
            <filename>module_autoload_*</filename> with
            <filename>KERNEL_MODULE_AUTOLOAD</filename>, and add any modules
            for which <filename>module_conf_*</filename> is specified to
            <filename>KERNEL_MODULE_PROBECONF</filename>.
        </para>

        <para>
            For more information, see the
            <link linkend='var-KERNEL_MODULE_AUTOLOAD'><filename>KERNEL_MODULE_AUTOLOAD</filename></link>
            and
            <link linkend='var-KERNEL_MODULE_PROBECONF'><filename>KERNEL_MODULE_PROBECONF</filename></link>
            variables.
        </para>
    </section>

    <section id='migration-1.7-qa-check-changes'>
        <title>QA Check Changes</title>

        <para>
            The following changes have occurred to the QA check process:
            <itemizedlist>
                <listitem><para>
                    Additional QA checks <filename>file-rdeps</filename>
                    and <filename>build-deps</filename> have been added in
                    order to verify that file dependencies are satisfied
                    (e.g. package contains a script requiring
                    <filename>/bin/bash</filename>) and build-time dependencies
                    are declared, respectively.
                    For more information, please see the
                    "<link linkend='ref-qa-checks'>QA Error and Warning Messages</link>"
                    chapter.
                    </para></listitem>
                <listitem><para>
                    Package QA checks are now performed during a new
                    <link linkend='ref-tasks-package_qa'><filename>do_package_qa</filename></link>
                    task rather than being part of the
                    <link linkend='ref-tasks-package'><filename>do_package</filename></link>
                    task.
                    This allows more parallel execution.
                    This change is unlikely to be an issue except for highly
                    customized recipes that disable packaging tasks themselves
                    by marking them as <filename>noexec</filename>.
                    For those packages, you will need to disable the
                    <filename>do_package_qa</filename> task as well.
                    </para></listitem>
                <listitem><para>
                    Files being overwritten during the
                    <link linkend='ref-tasks-populate_sysroot'><filename>do_populate_sysroot</filename></link>
                    task now trigger an error instead of a warning.
                    Recipes should not be overwriting files written to the
                    sysroot by other recipes.
                    If you have these types of recipes, you need to alter them
                    so that they do not overwrite these files.</para>
                    <para>You might now receive this error after changes in
                    configuration or metadata resulting in orphaned files
                    being left in the sysroot.
                    If you do receive this error, the way to resolve the issue
                    is to delete your
                    <link linkend='var-TMPDIR'><filename>TMPDIR</filename></link>
                    or to move it out of the way and then re-start the build.
                    Anything that has been fully built up to that point and
                    does not need rebuilding will be restored from the shared
                    state cache and the rest of the build will be able to
                    proceed as normal.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>

    <section id='migration-1.7-removed-recipes'>
        <title>Removed Recipes</title>

        <para>
            The following recipes have been removed:
            <itemizedlist>
                <listitem><para>
                    <filename>x-load</filename>:
                    This recipe has been superseded by
                    U-boot SPL for all Cortex-based TI SoCs.
                    For legacy boards, the <filename>meta-ti</filename>
                    layer, which contains a maintained recipe, should be used
                    instead.
                    </para></listitem>
                <listitem><para>
                    <filename>ubootchart</filename>:
                    This recipe is obsolete.
                    A <filename>bootchart2</filename> recipe has been added
                    to functionally replace it.
                    </para></listitem>
                <listitem><para>
                    <filename>linux-yocto 3.4</filename>:
                    Support for the linux-yocto 3.4 kernel has been dropped.
                    Support for the 3.10 and 3.14 kernels remains, while
                    support for version 3.17 has been added.
                    </para></listitem>
                <listitem><para>
                    <filename>eglibc</filename> has been removed in favor of
                    <filename>glibc</filename>.
                    See the
                    "<link linkend='migration-1.7-glibc-replaces-eglibc'><filename>eglibc 2.19</filename> Replaced with <filename>glibc 2.20</filename></link>"
                    section for more information.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>

    <section id='migration-1.7-miscellaneous-changes'>
        <title>Miscellaneous Changes</title>

        <para>
            The following miscellaneous change occurred:
            <itemizedlist>
                <listitem><para>
                    The build history feature now writes
                    <filename>build-id.txt</filename> instead of
                    <filename>build-id</filename>.
                    Additionally, <filename>build-id.txt</filename>
                    now contains the full build header as printed by
                    BitBake upon starting the build.
                    You should manually remove old "build-id" files from your
                    existing build history repositories to avoid confusion.
                    For information on the build history feature, see the
                    "<link linkend='maintaining-build-output-quality'>Maintaining Build Output Quality</link>"
                    section.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>
</section>

<section id='moving-to-the-yocto-project-1.8-release'>
    <title>Moving to the Yocto Project 1.8 Release</title>

    <para>
        This section provides migration information for moving to the
        Yocto Project 1.8 Release from the prior release.
    </para>

    <section id='migration-1.8-removed-recipes'>
        <title>Removed Recipes</title>

        <para>
            The following recipes have been removed:
            <itemizedlist>
                <listitem><para><filename>owl-video</filename>:
                    Functionality replaced by <filename>gst-player</filename>.
                    </para></listitem>
                <listitem><para><filename>gaku</filename>:
                    Functionality replaced by <filename>gst-player</filename>.
                    </para></listitem>
                <listitem><para><filename>gnome-desktop</filename>:
                    This recipe is now available in
                    <filename>meta-gnome</filename> and is no longer needed.
                    </para></listitem>
                <listitem><para><filename>gsettings-desktop-schemas</filename>:
                    This recipe is now available in
                    <filename>meta-gnome</filename> and is no longer needed.
                    </para></listitem>
                <listitem><para><filename>python-argparse</filename>:
                    The <filename>argparse</filename> module is already
                    provided in the default Python distribution in a
                    package named <filename>python-argparse</filename>.
                    Consequently, the separate
                    <filename>python-argparse</filename> recipe is no
                    longer needed.
                    </para></listitem>
                <listitem><para><filename>telepathy-python, libtelepathy, telepathy-glib, telepathy-idle, telepathy-mission-control</filename>:
                    All these recipes have moved to
                    <filename>meta-oe</filename> and are consequently no
                    longer needed by any recipes in OpenEmbedded-Core.
                    </para></listitem>
                <listitem><para><filename>linux-yocto_3.10</filename> and <filename>linux-yocto_3.17</filename>:
                    Support for the linux-yocto 3.10 and 3.17 kernels has been
                    dropped.
                    Support for the 3.14 kernel remains, while support for
                    3.19 kernel has been added.
                    </para></listitem>
                <listitem><para><filename>poky-feed-config-opkg</filename>:
                    This recipe has become obsolete and is no longer needed.
                    Use <filename>distro-feed-config</filename> from
                    <filename>meta-oe</filename> instead.
                    </para></listitem>
                <listitem><para><filename>libav 0.8.x</filename>:
                    <filename>libav 9.x</filename> is now used.
                    </para></listitem>
                <listitem><para><filename>sed-native</filename>:
                    No longer needed.
                    A working version of <filename>sed</filename> is expected
                    to be provided by the host distribution.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>

    <section id='migration-1.8-bluez'>
        <title>BlueZ 4.x / 5.x Selection</title>

        <para>
            Proper built-in support for selecting BlueZ 5.x in preference
            to the default of 4.x now exists.
            To use BlueZ 5.x, simply add "bluez5" to your
            <link linkend='var-DISTRO_FEATURES'><filename>DISTRO_FEATURES</filename></link>
            value.
            If you had previously added append files
            (<filename>*.bbappend</filename>) to make this selection, you can
            now remove them.
        </para>

        <para>
            Additionally, a
            <link linkend='ref-classes-bluetooth'><filename>bluetooth</filename></link>
            class has been added to make selection of the appropriate bluetooth
            support within a recipe a little easier.
            If you wish to make use of this class in a recipe, add something
            such as the following:
            <literallayout class='monospaced'>
     inherit bluetooth
     PACKAGECONFIG ??= "${@bb.utils.contains('DISTRO_FEATURES', 'bluetooth', '${BLUEZ}', '', d)}
     PACKAGECONFIG[bluez4] = "--enable-bluetooth,--disable-bluetooth,bluez4"
     PACKAGECONFIG[bluez5] = "--enable-bluez5,--disable-bluez5,bluez5"
            </literallayout>
        </para>
    </section>

    <section id='migration-1.8-kernel-build-changes'>
        <title>Kernel Build Changes</title>

        <para>
            The kernel build process was changed to place the source
            in a common shared work area and to place build artifacts
            separately in the source code tree.
            In theory, migration paths have been provided for most common
            usages in kernel recipes but this might not work in all cases.
            In particular, users need to ensure that
            <filename>${S}</filename> (source files) and
            <filename>${B}</filename> (build artifacts) are used
            correctly in functions such as
            <link linkend='ref-tasks-configure'><filename>do_configure</filename></link>
            and
            <link linkend='ref-tasks-install'><filename>do_install</filename></link>.
            For kernel recipes that do not inherit from
            <filename>kernel-yocto</filename> or include
            <filename>linux-yocto.inc</filename>, you might wish to
            refer to the <filename>linux.inc</filename> file in the
            <filename>meta-oe</filename> layer for the kinds of changes you
            need to make.
            For reference, here is the
            <ulink url='http://cgit.openembedded.org/meta-openembedded/commit/meta-oe/recipes-kernel/linux/linux.inc?id=fc7132ede27ac67669448d3d2845ce7d46c6a1ee'>commit</ulink>
            where the <filename>linux.inc</filename> file in
            <filename>meta-oe</filename> was updated.
        </para>

        <para>
            Recipes that rely on the kernel source code and do not inherit
            the module classes might need to add explicit dependencies on
            the <filename>do_shared_workdir</filename> kernel task, for example:
            <literallayout class='monospaced'>
     do_configure[depends] += "virtual/kernel:do_shared_workdir"
            </literallayout>
        </para>
    </section>

    <section id='migration-1.8-ssl'>
        <title>SSL 3.0 is Now Disabled in OpenSSL</title>

        <para>
            SSL 3.0 is now disabled when building OpenSSL.
            Disabling SSL 3.0 avoids any lingering instances of the POODLE
            vulnerability.
            If you feel you must re-enable SSL 3.0, then you can add an
            append file (<filename>*.bbappend</filename>) for the
            <filename>openssl</filename> recipe to remove "-no-ssl3"
            from
            <link linkend='var-EXTRA_OECONF'><filename>EXTRA_OECONF</filename></link>.
        </para>
    </section>

    <section id='migration-1.8-default-sysroot-poisoning'>
        <title>Default Sysroot Poisoning</title>

        <para>
            <filename>gcc's</filename> default sysroot and include directories
            are now "poisoned".
            In other words, the sysroot and include directories are being
            redirected to a non-existent location in order to catch when
            host directories are being used due to the correct options not
            being passed.
            This poisoning applies both to the cross-compiler used within the
            build and to the cross-compiler produced in the SDK.
        </para>

        <para>
            If this change causes something in the build to fail, it almost
            certainly means the various compiler flags and commands are not
            being passed correctly to the underlying piece of software.
            In such cases, you need to take corrective steps.
        </para>
    </section>

    <section id='migration-1.8-rebuild-improvements'>
        <title>Rebuild Improvements</title>

        <para>
            Changes have been made to the
            <link linkend='ref-classes-base'><filename>base</filename></link>,
            <link linkend='ref-classes-autotools'><filename>autotools</filename></link>,
            and
            <link linkend='ref-classes-cmake'><filename>cmake</filename></link>
            classes to clean out generated files when the
            <link linkend='ref-tasks-configure'><filename>do_configure</filename></link>
            task needs to be re-executed.
        </para>

        <para>
            One of the improvements is to attempt to run "make clean" during
            the <filename>do_configure</filename> task if a
            <filename>Makefile</filename> exists.
            Some software packages do not provide a working clean target
            within their make files.
            If you have such recipes, you need to set
            <link linkend='var-CLEANBROKEN'><filename>CLEANBROKEN</filename></link>
            to "1" within the recipe, for example:
            <literallayout class='monospaced'>
     CLEANBROKEN = "1"
            </literallayout>
        </para>
    </section>

    <section id='migration-1.8-qa-check-and-validation-changes'>
        <title>QA Check and Validation Changes</title>

        <para>
            The following QA Check and Validation Changes have occurred:
            <itemizedlist>
                <listitem><para>
                    Usage of <filename>PRINC</filename>
                    previously triggered a warning.
                    It now triggers an error.
                    You should remove any remaining usage of
                    <filename>PRINC</filename> in any recipe or append file.
                    </para></listitem>
                <listitem><para>
                    An additional QA check has been added to detect usage of
                    <filename>${D}</filename> in
                    <link linkend='var-FILES'><filename>FILES</filename></link>
                    values where
                    <link linkend='var-D'><filename>D</filename></link> values
                    should not be used at all.
                    The same check ensures that <filename>$D</filename> is used
                    in
                    <filename>pkg_preinst/pkg_postinst/pkg_prerm/pkg_postrm</filename>
                    functions instead of <filename>${D}</filename>.
                    </para></listitem>
                <listitem><para>
                    <link linkend='var-S'><filename>S</filename></link> now
                    needs to be set to a valid value within a recipe.
                    If <filename>S</filename> is not set in the recipe, the
                    directory is not automatically created.
                    If <filename>S</filename> does not point to a directory
                    that exists at the time the
                    <link linkend='ref-tasks-unpack'><filename>do_unpack</filename></link>
                    task finishes, a warning will be shown.
                    </para></listitem>
                <listitem><para>
                    <link linkend='var-LICENSE'><filename>LICENSE</filename></link>
                    is now validated for correct formatting of multiple
                    licenses.
                    If the format is invalid (e.g. multiple licenses are
                    specified with no operators to specify how the multiple
                    licenses interact), then a warning will be shown.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>

    <section id='migration-1.8-miscellaneous-changes'>
        <title>Miscellaneous Changes</title>

        <para>
            The following miscellaneous changes have occurred:
            <itemizedlist>
                <listitem><para>
                    The <filename>send-error-report</filename> script now
                    expects a "-s" option to be specified before the server
                    address.
                    This assumes a server address is being specified.
                    </para></listitem>
                <listitem><para>
                    The <filename>oe-pkgdata-util</filename> script now
                    expects a "-p" option to be specified before the
                    <filename>pkgdata</filename> directory, which is now
                    optional.
                    If the <filename>pkgdata</filename> directory is not
                    specified, the script will run BitBake to query
                    <link linkend='var-PKGDATA_DIR'><filename>PKGDATA_DIR</filename></link>
                    from the build environment.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>
</section>

<section id='moving-to-the-yocto-project-2.0-release'>
    <title>Moving to the Yocto Project 2.0 Release</title>

    <para>
        This section provides migration information for moving to the
        Yocto Project 2.0 Release from the prior release.
    </para>

    <section id='migration-2.0-gcc-5'>
        <title>GCC 5</title>

        <para>
            The default compiler is now GCC 5.2.
            This change has required fixes for compilation errors in a number
            of other recipes.
        </para>

        <para>
            One important example is a fix for when the Linux kernel freezes at
            boot time on ARM when built with GCC 5.
            If you are using your own kernel recipe or source tree and
            building for ARM, you will likely need to apply this
            <ulink url='https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit?id=a077224fd35b2f7fbc93f14cf67074fc792fbac2'>patch</ulink>.
            The standard <filename>linux-yocto</filename> kernel source tree
            already has a workaround for the same issue.
        </para>

        <para>
            For further details, see
            <ulink url='https://gcc.gnu.org/gcc-5/changes.html'></ulink> and
            the porting guide at
            <ulink url='https://gcc.gnu.org/gcc-5/porting_to.html'></ulink>.
        </para>

        <para>
            Alternatively, you can switch back to GCC 4.9 or 4.8 by
            setting <filename>GCCVERSION</filename> in your configuration,
            as follows:
            <literallayout class='monospaced'>
     GCCVERSION = "4.9%"
            </literallayout>
        </para>
    </section>

    <section id='migration-2.0-Gstreamer-0.10-removed'>
        <title>Gstreamer 0.10 Removed</title>

        <para>
            Gstreamer 0.10 has been removed in favor of Gstreamer 1.x.
            As part of the change, recipes for Gstreamer 0.10 and related
            software are now located
            in <filename>meta-multimedia</filename>.
            This change results in Qt4 having Phonon and Gstreamer
            support in QtWebkit disabled by default.
        </para>
    </section>

    <section id='migration-2.0-removed-recipes'>
        <title>Removed Recipes</title>

        <para>
            The following recipes have been moved or removed:
            <itemizedlist>
                <listitem><para>
                    <filename>bluez4</filename>: The recipe is obsolete and
                    has been moved due to <filename>bluez5</filename>
                    becoming fully integrated.
                    The <filename>bluez4</filename> recipe now resides in
                    <filename>meta-oe</filename>.
                    </para></listitem>
                <listitem><para>
                    <filename>gamin</filename>: The recipe is obsolete and
                    has been removed.
                    </para></listitem>
                <listitem><para>
                    <filename>gnome-icon-theme</filename>: The recipe's
                    functionally has been replaced by
                    <filename>adwaita-icon-theme</filename>.
                    </para></listitem>
                <listitem><para>
                    Gstreamer 0.10 Recipes: Recipes for Gstreamer 0.10 have
                    been removed in favor of the recipes for Gstreamer 1.x.
                    </para></listitem>
                <listitem><para>
                    <filename>insserv</filename>: The recipe is obsolete and
                    has been removed.
                    </para></listitem>
                <listitem><para>
                    <filename>libunique</filename>: The recipe is no longer
                    used and has been moved to <filename>meta-oe</filename>.
                    </para></listitem>
                <listitem><para>
                    <filename>midori</filename>: The recipe's functionally
                    has been replaced by <filename>epiphany</filename>.
                    </para></listitem>
                <listitem><para>
                    <filename>python-gst</filename>: The recipe is obsolete
                    and has been removed since it only contains bindings for
                    Gstreamer 0.10.
                    </para></listitem>
                <listitem><para>
                    <filename>qt-mobility</filename>: The recipe is obsolete and
                    has been removed since it requires
                    <filename>Gstreamer 0.10</filename>, which has been
                    replaced.
                    </para></listitem>
                <listitem><para>
                    <filename>subversion</filename>: All 1.6.x versions of this
                    recipe have been removed.
                    </para></listitem>
                <listitem><para>
                    <filename>webkit-gtk</filename>: The older 1.8.3 version
                    of this recipe has been removed in favor of
                    <filename>webkitgtk</filename>.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>

    <section id='migration-2.0-bitbake-datastore-improvements'>
        <title>BitBake datastore improvements</title>

        <para>
            The method by which BitBake's datastore handles overrides has
            changed.
            Overrides are now applied dynamically and
            <filename>bb.data.update_data()</filename> is now a no-op.
            Thus, <filename>bb.data.update_data()</filename> is no longer
            required in order to apply the correct overrides.
            In practice, this change is unlikely to require any changes to
            Metadata.
            However, these minor changes in behavior exist:
            <itemizedlist>
                <listitem><para>
                    All potential overrides are now visible in the variable
                    history as seen when you run the following:
                    <literallayout class='monospaced'>
     $ bitbake -e
                    </literallayout>
                    </para></listitem>
                <listitem><para>
                    <filename>d.delVar('VARNAME')</filename> and
                    <filename>d.setVar('VARNAME', None)</filename> result
                    in the variable and all of its overrides being cleared out.
                    Before the change, only the non-overridden values
                    were cleared.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>

    <section id='migration-2.0-shell-message-function-changes'>
        <title>Shell Message Function Changes</title>

        <para>
            The shell versions of the BitBake message functions (i.e.
            <filename>bbdebug</filename>, <filename>bbnote</filename>,
            <filename>bbwarn</filename>, <filename>bbplain</filename>,
            <filename>bberror</filename>, and <filename>bbfatal</filename>)
            are now connected through to their BitBake equivalents
            <filename>bb.debug()</filename>, <filename>bb.note()</filename>,
            <filename>bb.warn()</filename>, <filename>bb.plain()</filename>,
            <filename>bb.error()</filename>, and
            <filename>bb.fatal()</filename>, respectively.
            Thus, those message functions that you would expect to be printed
            by the BitBake UI are now actually printed.
            In practice, this change means two things:
            <itemizedlist>
                <listitem><para>
                    If you now see messages on the console that you did not
                    previously see as a result of this change, you might
                    need to clean up the calls to
                    <filename>bbwarn</filename>, <filename>bberror</filename>,
                    and so forth.
                    Or, you might want to simply remove the calls.
                    </para></listitem>
                <listitem><para>
                    The <filename>bbfatal</filename> message function now
                    suppresses the full error log in the UI, which means any
                    calls to <filename>bbfatal</filename> where you still
                    wish to see the full error log should be replaced by
                    <filename>die</filename> or
                    <filename>bbfatal_log</filename>.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>

    <section id='migration-2.0-extra-development-debug-package-cleanup'>
        <title>Extra Development/Debug Package Cleanup</title>

        <para>
            The following recipes have had extra
            <filename>dev/dbg</filename> packages removed:
            <itemizedlist>
                <listitem><para>
                    <filename>acl</filename>
                    </para></listitem>
                <listitem><para>
                    <filename>apmd</filename>
                    </para></listitem>
                <listitem><para>
                    <filename>aspell</filename>
                    </para></listitem>
                <listitem><para>
                    <filename>attr</filename>
                    </para></listitem>
                <listitem><para>
                    <filename>augeas</filename>
                    </para></listitem>
                <listitem><para>
                    <filename>bzip2</filename>
                    </para></listitem>
                <listitem><para>
                    <filename>cogl</filename>
                    </para></listitem>
                <listitem><para>
                    <filename>curl</filename>
                    </para></listitem>
                <listitem><para>
                    <filename>elfutils</filename>
                    </para></listitem>
                <listitem><para>
                    <filename>gcc-target</filename>
                    </para></listitem>
                <listitem><para>
                    <filename>libgcc</filename>
                    </para></listitem>
                <listitem><para>
                    <filename>libtool</filename>
                    </para></listitem>
                <listitem><para>
                    <filename>libxmu</filename>
                    </para></listitem>
                <listitem><para>
                    <filename>opkg</filename>
                    </para></listitem>
                <listitem><para>
                    <filename>pciutils</filename>
                    </para></listitem>
                <listitem><para>
                    <filename>rpm</filename>
                    </para></listitem>
                <listitem><para>
                    <filename>sysfsutils</filename>
                    </para></listitem>
                <listitem><para>
                    <filename>tiff</filename>
                    </para></listitem>
                <listitem><para>
                    <filename>xz</filename>
                    </para></listitem>
            </itemizedlist>
            All of the above recipes now conform to the standard packaging
            scheme where a single <filename>-dev</filename>,
            <filename>-dbg</filename>, and <filename>-staticdev</filename>
            package exists per recipe.
        </para>
    </section>

    <section id='migration-2.0-recipe-maintenance-tracking-data-moved-to-oe-core'>
        <title>Recipe Maintenance Tracking Data Moved to OE-Core</title>

        <para>
            Maintenance tracking data for recipes that was previously part
            of <filename>meta-yocto</filename> has been moved to OE-Core.
            The change includes <filename>package_regex.inc</filename> and
            <filename>distro_alias.inc</filename>, which are typically enabled
            when using the
            <link linkend='ref-classes-distrodata'><filename>distrodata</filename></link>
            class.
            Additionally, the contents of
            <filename>upstream_tracking.inc</filename> has now been split out
            to the relevant recipes.
        </para>
    </section>

    <section id='migration-2.0-automatic-stale-sysroot-file-cleanup'>
        <title>Automatic Stale Sysroot File Cleanup</title>

        <para>
            Stale files from recipes that no longer exist in the current
            configuration are now automatically removed from
            sysroot as well as removed from
            any other place managed by shared state.
            This automatic cleanup means that the build system now properly
            handles situations such as renaming the build system side of
            recipes, removal of layers from
            <filename>bblayers.conf</filename>, and
            <link linkend='var-DISTRO_FEATURES'><filename>DISTRO_FEATURES</filename></link>
            changes.
        </para>

        <para>
            Additionally, work directories for old versions of recipes are
            now pruned.
            If you wish to disable pruning old work directories, you can set
            the following variable in your configuration:
            <literallayout class='monospaced'>
     SSTATE_PRUNE_OBSOLETEWORKDIR = "0"
            </literallayout>
        </para>
    </section>

    <section id='migration-2.0-linux-yocto-kernel-metadata-repository-now-split-from-source'>
        <title><filename>linux-yocto</filename> Kernel Metadata Repository Now Split from Source</title>

        <para>
            The <filename>linux-yocto</filename> tree has up to now been a
            combined set of kernel changes and configuration (meta) data
            carried in a single tree.
            While this format is effective at keeping kernel configuration and
            source modifications synchronized, it is not always obvious to
            developers how to manipulate the Metadata as compared to the
            source.
        </para>

        <para>
            Metadata processing has now been removed from the
            <link linkend='ref-classes-kernel-yocto'><filename>kernel-yocto</filename></link>
            class and the external Metadata repository
            <filename>yocto-kernel-cache</filename>, which has always been used
            to seed the <filename>linux-yocto</filename> "meta" branch.
            This separate <filename>linux-yocto</filename> cache repository
            is now the primary location for this data.
            Due to this change, <filename>linux-yocto</filename> is no longer
            able to process combined trees.
            Thus, if you need to have your own combined kernel repository,
            you must do the split there as well and update your recipes
            accordingly.
            See the <filename>meta/recipes-kernel/linux/linux-yocto_4.1.bb</filename>
            recipe for an example.
        </para>
    </section>

    <section id='migration-2.0-additional-qa-checks'>
        <title>Additional QA checks</title>

        <para>
            The following QA checks have been added:
            <itemizedlist>
                <listitem><para>
                    Added a "host-user-contaminated" check for ownership
                    issues for packaged files outside of
                    <filename>/home</filename>.
                    The check looks for files that are incorrectly owned by the
                    user that ran BitBake instead of owned by a valid user in
                    the target system.
                    </para></listitem>
                <listitem><para>
                    Added an "invalid-chars" check for invalid (non-UTF8)
                    characters in recipe metadata variable values
                    (i.e.
                    <link linkend='var-DESCRIPTION'><filename>DESCRIPTION</filename></link>,
                    <link linkend='var-SUMMARY'><filename>SUMMARY</filename></link>,
                    <link linkend='var-LICENSE'><filename>LICENSE</filename></link>,
                    and
                    <link linkend='var-SECTION'><filename>SECTION</filename></link>).
                    Some package managers do not support these characters.
                    </para></listitem>
                <listitem><para>
                    Added an "invalid-packageconfig" check for any options
                    specified in
                    <link linkend='var-PACKAGECONFIG'><filename>PACKAGECONFIG</filename></link>
                    that do not match any <filename>PACKAGECONFIG</filename>
                    option defined for the recipe.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>

    <section id='migration-2.0-miscellaneous'>
        <title>Miscellaneous Changes</title>

        <para>
            These additional changes exist:
            <itemizedlist>
                <listitem><para>
                    <filename>gtk-update-icon-cache</filename> has been
                    renamed to <filename>gtk-icon-utils</filename>.
                    </para></listitem>
                <listitem><para>
                    The <filename>tools-profile</filename>
                    <link linkend='var-IMAGE_FEATURES'><filename>IMAGE_FEATURES</filename></link>
                    item as well as its corresponding packagegroup and
                    <filename>packagegroup-core-tools-profile</filename> no
                    longer bring in <filename>oprofile</filename>.
                    Bringing in <filename>oprofile</filename> was originally
                    added to aid compilation on resource-constrained
                    targets.
                    However, this aid has not been widely used and is not
                    likely to be used going forward due to the more powerful
                    target platforms and the existence of better
                    cross-compilation tools.
                    </para></listitem>
                <listitem><para>
                    The
                    <link linkend='var-IMAGE_FSTYPES'><filename>IMAGE_FSTYPES</filename></link>
                    variable's default value now specifies
                    <filename>ext4</filename> instead of
                    <filename>ext3</filename>.
                    </para></listitem>
                <listitem><para>
                    All support for the <filename>PRINC</filename>
                    variable has been removed.
                    </para></listitem>
                <listitem><para>
                    The <filename>packagegroup-core-full-cmdline</filename>
                    packagegroup no longer brings in
                    <filename>lighttpd</filename> due to the fact that
                    bringing in <filename>lighttpd</filename> is not really in
                    line with the packagegroup's purpose, which is to add full
                    versions of command-line tools that by default are
                    provided by <filename>busybox</filename>.
                    </para></listitem>
            </itemizedlist>
        </para>
    </section>
</section>


</chapter>
<!--
vim: expandtab tw=80 ts=4
-->