path: root/documentation/dev-manual/dev-manual-model.xml

<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
[<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] >

<chapter id='dev-manual-model'>

<title>Common Development Models</title>

<para>
    Many development models exist for which you can use the Yocto Project.
    This chapter overviews simple methods that use tools provided by the
    Yocto Project:
    <itemizedlist>
        <listitem><para><emphasis>System Development:</emphasis>
             System Development covers Board Support Package (BSP) development
             and kernel modification or configuration.
             For an example on how to create a BSP, see the
             "<ulink url='&YOCTO_DOCS_BSP_URL;#creating-a-new-bsp-layer-using-the-yocto-bsp-script'>Creating a New BSP Layer Using the yocto-bsp Script</ulink>"
             section in the Yocto Project Board Support Package (BSP)
             Developer's Guide.
             For more complete information on how to work with the kernel,
             see the
             <ulink url='&YOCTO_DOCS_KERNEL_DEV_URL;'>Yocto Project Linux Kernel Development Manual</ulink>.
             </para></listitem>
         <listitem><para><emphasis>User Application Development:</emphasis>
             User Application Development covers development of applications
             that you intend to run on target hardware.
             For information on how to set up your host development system for
             user-space application development, see the
             <ulink url='&YOCTO_DOCS_SDK_URL;'>Yocto Project Software Development Kit (SDK) Developer's Guide</ulink>.
             For a simple example of user-space application development using
             the <trademark class='trade'>Eclipse</trademark> IDE, see the
             "<ulink url='&YOCTO_DOCS_SDK_URL;#sdk-developing-applications-using-eclipse'>Developing Applications Using <trademark class='trade'>Eclipse</trademark></ulink>" section.
             </para></listitem>
         <listitem><para><emphasis>Temporary Source Code Modification:</emphasis>
             Direct modification of temporary source code is a convenient
             development model to quickly iterate and develop towards a
             solution.
             Once you implement the solution, you should of course take
             steps to get the changes upstream and applied in the affected
             recipes.
             </para></listitem>
         <listitem><para><emphasis>Image Development using Toaster:</emphasis>
             You can use <ulink url='&YOCTO_HOME_URL;/Tools-resources/projects/toaster'>Toaster</ulink>
             to build custom operating system images within the build
             environment.
             Toaster provides an efficient interface to the OpenEmbedded build
             that allows you to start builds and examine build statistics.
             </para></listitem>
         <listitem><para><emphasis>Using a Development Shell:</emphasis>
             You can use a
             <link linkend='platdev-appdev-devshell'><filename>devshell</filename></link>
             to efficiently debug
             commands or simply edit packages.
             Working inside a development shell is a quick way to set up the
             OpenEmbedded build environment to work on parts of a project.
             </para></listitem>
     </itemizedlist>
</para>

<section id='system-development-model'>
    <title>System Development Workflow</title>

    <para>
        System development involves modification or creation of an image that you want to run on
        a specific hardware target.
        Usually, when you want to create an image that runs on embedded hardware, the image does
        not require the same number of features that a full-fledged Linux distribution provides.
        Thus, you can create a much smaller image that is designed to use only the
        features for your particular hardware.
    </para>

    <para>
        To help you understand how system development works in the Yocto Project, this section
        covers two types of image development:  BSP creation and kernel modification or
        configuration.
    </para>

    <section id='developing-a-board-support-package-bsp'>
        <title>Developing a Board Support Package (BSP)</title>

        <para>
            A BSP is a collection of recipes that, when applied during a build, results in
            an image that you can run on a particular board.
            Thus, the package when compiled into the new image, supports the operation of the board.
        </para>

        <note>
            For a brief list of terms used when describing the development process in the Yocto Project,
            see the "<link linkend='yocto-project-terms'>Yocto Project Terms</link>" section.
        </note>

        <para>
            The remainder of this section presents the basic
            steps used to create a BSP using the Yocto Project's
            <ulink url='&YOCTO_DOCS_BSP_URL;#using-the-yocto-projects-bsp-tools'>BSP Tools</ulink>.
            Although not required for BSP creation, the
            <filename>meta-intel</filename> repository, which contains
            many BSPs supported by the Yocto Project, is part of the example.
        </para>

        <para>
            For an example that shows how to create a new layer using the tools, see the
            "<ulink url='&YOCTO_DOCS_BSP_URL;#creating-a-new-bsp-layer-using-the-yocto-bsp-script'>Creating a New BSP Layer Using the yocto-bsp Script</ulink>"
             section in the Yocto Project Board Support Package (BSP) Developer's Guide.
        </para>

        <para>
            The following illustration and list summarize the BSP creation general workflow.
        </para>

        <para>
            <imagedata fileref="figures/bsp-dev-flow.png" width="6in" depth="7in" align="center" scalefit="1" />
        </para>

        <para>
            <orderedlist>
                <listitem><para><emphasis>Set up your host development system to support
                    development using the Yocto Project</emphasis>:  See the
                    "<ulink url='&YOCTO_DOCS_QS_URL;#the-linux-distro'>The Linux Distribution</ulink>"
                    and the
                    "<ulink url='&YOCTO_DOCS_QS_URL;#packages'>The Build Host Packages</ulink>" sections both
                    in the Yocto Project Quick Start for requirements.</para></listitem>
                <listitem><para><emphasis>Establish a local copy of the project files on your
                    system</emphasis>:  You need this <link linkend='source-directory'>Source
                    Directory</link> available on your host system.
                    Having these files on your system gives you access to the build
                    process and to the tools you need.
                    For information on how to set up the Source Directory,
                    see the
                    "<link linkend='getting-setup'>Getting Set Up</link>" section.</para></listitem>
                <listitem><para><emphasis>Establish the <filename>meta-intel</filename>
                    repository on your system</emphasis>:  Having local copies
                    of these supported BSP layers on your system gives you
                    access to layers you might be able to build on or modify
                    to create your BSP.
                    For information on how to get these files, see the
                    "<link linkend='getting-setup'>Getting Set Up</link>" section.</para></listitem>
                <listitem><para><emphasis>Create your own BSP layer using the
                    <ulink url='&YOCTO_DOCS_BSP_URL;#creating-a-new-bsp-layer-using-the-yocto-bsp-script'><filename>yocto-bsp</filename></ulink> script</emphasis>:
                    Layers are ideal for
                    isolating and storing work for a given piece of hardware.
                    A layer is really just a location or area in which you place
                    the recipes and configurations for your BSP.
                    In fact, a BSP is, in itself, a special type of layer.
                    The simplest way to create a new BSP layer that is compliant with the
                    Yocto Project is to use the <filename>yocto-bsp</filename> script.
                    For information about that script, see the
                    "<ulink url='&YOCTO_DOCS_BSP_URL;#creating-a-new-bsp-layer-using-the-yocto-bsp-script'>Creating a New BSP Layer Using the yocto-bsp Script</ulink>"
                    section in the Yocto Project Board Support (BSP) Developer's Guide.
                    </para>

                    <para>
                        Another example that illustrates a layer
                        is an application.
                        Suppose you are creating an application that has
                        library or other dependencies in order for it to
                        compile and run.
                        The layer, in this case, would be where all the
                        recipes that define those dependencies are kept.
                        The key point for a layer is that it is an isolated
                        area that contains all the relevant information for
                        the project that the OpenEmbedded build system knows
                        about.
                        For more information on layers, see the
                        "<link linkend='understanding-and-creating-layers'>Understanding and Creating Layers</link>"
                        section.
                        For more information on BSP layers, see the
                        "<ulink url='&YOCTO_DOCS_BSP_URL;#bsp-layers'>BSP Layers</ulink>"
                        section in the Yocto Project Board Support Package (BSP)
                        Developer's Guide.
                        <note>
                            <para>
                                Five BSPs exist that are part of the Yocto Project release:
                                <filename>beaglebone</filename> (ARM),
                                <filename>mpc8315e</filename> (PowerPC),
                                and <filename>edgerouter</filename> (MIPS).
                                The recipes and configurations for these five BSPs
                                are located and dispersed within the
                                <link linkend='source-directory'>Source Directory</link>.
                            </para>

                            <para>
                                Three core Intel BSPs exist as part of the Yocto
                                Project release in the
                                <filename>meta-intel</filename> layer:
                                <itemizedlist>
                                    <listitem><para><filename>intel-core2-32</filename>,
                                        which is a BSP optimized for the Core2 family of CPUs
                                        as well as all CPUs prior to the Silvermont core.
                                        </para></listitem>
                                    <listitem><para><filename>intel-corei7-64</filename>,
                                        which is a BSP optimized for Nehalem and later
                                        Core and Xeon CPUs as well as Silvermont and later
                                        Atom CPUs, such as the Baytrail SoCs.
                                        </para></listitem>
                                    <listitem><para><filename>intel-quark</filename>,
                                        which is a BSP optimized for the Intel Galileo
                                        gen1 &amp; gen2 development boards.
                                        </para></listitem>
                                </itemizedlist>
                            </para>
                        </note>
                    </para>

                    <para>When you set up a layer for a new BSP, you should follow a standard layout.
                    This layout is described in the
                    "<ulink url='&YOCTO_DOCS_BSP_URL;#bsp-filelayout'>Example Filesystem Layout</ulink>"
                    section of the Board Support Package (BSP) Development Guide.
                    In the standard layout, you will notice a suggested structure for recipes and
                    configuration information.
                    You can see the standard layout for a BSP by examining
                    any supported BSP found in the <filename>meta-intel</filename> layer inside
                    the Source Directory.</para></listitem>
                <listitem><para><emphasis>Make configuration changes to your new BSP
                    layer</emphasis>:  The standard BSP layer structure organizes the files you need
                    to edit in <filename>conf</filename> and several <filename>recipes-*</filename>
                    directories within the BSP layer.
                    Configuration changes identify where your new layer is on the local system
                    and identify which kernel you are going to use.
                    When you run the <filename>yocto-bsp</filename> script, you are able to interactively
                    configure many things for the BSP (e.g. keyboard, touchscreen, and so forth).
                    </para></listitem>
                <listitem><para><emphasis>Make recipe changes to your new BSP layer</emphasis>:  Recipe
                    changes include altering recipes (<filename>.bb</filename> files), removing
                    recipes you do not use, and adding new recipes or append files
                    (<filename>.bbappend</filename>) that you need to support your hardware.
                    </para></listitem>
                <listitem><para><emphasis>Prepare for the build</emphasis>:  Once you have made all the
                    changes to your BSP layer, there remains a few things
                    you need to do for the OpenEmbedded build system in order for it to create your image.
                    You need to get the build environment ready by sourcing an environment setup script
                    (i.e. <filename>oe-init-build-env</filename> or
                    <filename>oe-init-build-env-memres</filename>)
                    and you need to be sure two key configuration files are configured appropriately:
                    the <filename>conf/local.conf</filename> and the
                    <filename>conf/bblayers.conf</filename> file.
                    You must make the OpenEmbedded build system aware of your new layer.
                    See the
                    "<link linkend='enabling-your-layer'>Enabling Your Layer</link>" section
                    for information on how to let the build system know about your new layer.</para>
                    <para>The entire process for building an image is overviewed in the section
                    "<ulink url='&YOCTO_DOCS_QS_URL;#qs-building-images'>Building Images</ulink>" section
                    of the Yocto Project Quick Start.
                    You might want to reference this information.</para></listitem>
                <listitem><para><emphasis>Build the image</emphasis>:  The OpenEmbedded build system
                    uses the BitBake tool to build images based on the type of image you want to create.
                    You can find more information about BitBake in the
                    <ulink url='&YOCTO_DOCS_BB_URL;'>BitBake User Manual</ulink>.
                    </para>
                    <para>The build process supports several types of images to satisfy different needs.
                    See the
                    "<ulink url='&YOCTO_DOCS_REF_URL;#ref-images'>Images</ulink>" chapter
                    in the Yocto Project Reference Manual for information on
                    supported images.</para></listitem>
            </orderedlist>
        </para>
    </section>

    <section id='modifying-the-kernel'>
        <title><anchor id='kernel-spot' />Modifying the Kernel</title>

        <para>
            Kernel modification involves changing the Yocto Project kernel, which could involve changing
            configuration options as well as adding new kernel recipes.
            Configuration changes can be added in the form of configuration fragments, while recipe
            modification comes through the kernel's <filename>recipes-kernel</filename> area
            in a kernel layer you create.
        </para>

        <para>
            The remainder of this section presents a high-level overview of the Yocto Project
            kernel architecture and the steps to modify the kernel.
            You can reference the
            "<link linkend='patching-the-kernel'>Patching the Kernel</link>" section
            for an example that changes the source code of the kernel.
            For information on how to configure the kernel, see the
            "<link linkend='configuring-the-kernel'>Configuring the Kernel</link>" section.
            For more information on the kernel and on modifying the kernel, see the
            <ulink url='&YOCTO_DOCS_KERNEL_DEV_URL;'>Yocto Project Linux Kernel Development Manual</ulink>.
        </para>

        <section id='kernel-overview'>
            <title>Kernel Overview</title>

            <para>
                Traditionally, when one thinks of a patched kernel, they think of a base kernel
                source tree and a fixed structure that contains kernel patches.
                The Yocto Project, however, employs mechanisms that, in a sense, result in a kernel source
                generator.
                By the end of this section, this analogy will become clearer.
            </para>

            <para>
                You can find a web interface to the Yocto Project kernel source repositories at
                <ulink url='&YOCTO_GIT_URL;'></ulink>.
                If you look at the interface, you will see to the left a grouping of
                Git repositories titled "Yocto Linux Kernel."
                Within this group, you will find several kernels supported by
                the Yocto Project:
                <itemizedlist>
                    <listitem><para><emphasis>
                        <filename>linux-yocto-3.14</filename></emphasis> - The
                        stable Yocto Project kernel to use with the Yocto
                        Project Releases 1.6 and 1.7.
                        This kernel is based on the Linux 3.14 released kernel.
                        </para></listitem>
                    <listitem><para><emphasis>
                        <filename>linux-yocto-3.17</filename></emphasis> - An
                        additional, unsupported Yocto Project kernel used with
                        the Yocto Project Release 1.7.
                        This kernel is based on the Linux 3.17 released kernel.
                        </para></listitem>
                    <listitem><para><emphasis>
                        <filename>linux-yocto-3.19</filename></emphasis> - The
                        stable Yocto Project kernel to use with the Yocto
                        Project Release 1.8.
                        This kernel is based on the Linux 3.19 released kernel.
                        </para></listitem>
                    <listitem><para><emphasis>
                        <filename>linux-yocto-4.1</filename></emphasis> - The
                        stable Yocto Project kernel to use with the Yocto
                        Project Release 2.0.
                        This kernel is based on the Linux 4.1 released kernel.
                        </para></listitem>
                    <listitem><para><emphasis>
                        <filename>linux-yocto-4.4</filename></emphasis> - The
                        stable Yocto Project kernel to use with the Yocto
                        Project Release 2.1.
                        This kernel is based on the Linux 4.4 released kernel.
                        </para></listitem>
                    <listitem><para><emphasis>
                        <filename>linux-yocto-dev</filename></emphasis> - A
                        development kernel based on the latest upstream release
                        candidate available.
                        </para></listitem>
                </itemizedlist>
                <note>
                    Long Term Support Initiative (LTSI) for Yocto Project kernels
                    is as follows:
                    <itemizedlist>
                        <listitem><para>For Yocto Project releases 1.7, 1.8, and 2.0,
                            the LTSI kernel is <filename>linux-yocto-3.14</filename>.
                            </para></listitem>
                        <listitem><para>For Yocto Project release 2.1, the
                            LTSI kernel is <filename>linux-yocto-4.1</filename>.
                            </para></listitem>
                    </itemizedlist>
                </note>
            </para>

            <para>
                The kernels are maintained using the Git revision control system
                that structures them using the familiar "tree", "branch", and "leaf" scheme.
                Branches represent diversions from general code to more specific code, while leaves
                represent the end-points for a complete and unique kernel whose source files,
                when gathered from the root of the tree to the leaf, accumulate to create the files
                necessary for a specific piece of hardware and its features.
                The following figure displays this concept:
            <para>
                <imagedata fileref="figures/kernel-overview-1.png"
                    width="6in" depth="6in" align="center" scale="100" />
            </para>

            <para>
                Within the figure, the "Kernel.org Branch Point" represents the point in the tree
                where a supported base kernel is modified from the Linux kernel.
                For example, this could be the branch point for the <filename>linux-yocto-3.19</filename>
                kernel.
                Thus, everything further to the right in the structure is based on the
                <filename>linux-yocto-3.19</filename> kernel.
                Branch points to the right in the figure represent where the
                <filename>linux-yocto-3.19</filename> kernel is modified for specific hardware
                or types of kernels, such as real-time kernels.
                Each leaf thus represents the end-point for a kernel designed to run on a specific
                targeted device.
            </para>

            <para>
                The overall result is a Git-maintained repository from which all the supported
                kernel types can be derived for all the supported devices.
                A big advantage to this scheme is the sharing of common features by keeping them in
                "larger" branches within the tree.
                This practice eliminates redundant storage of similar features shared among kernels.
            </para>

            <note>
                Keep in mind the figure does not take into account all the supported Yocto
                Project kernel types, but rather shows a single generic kernel just for conceptual purposes.
                Also keep in mind that this structure represents the Yocto Project source repositories
                that are either pulled from during the build or established on the host development system
                prior to the build by either cloning a particular kernel's Git repository or by
                downloading and unpacking a tarball.
            </note>

            <para>
                Upstream storage of all the available kernel source code is one thing, while
                representing and using the code on your host development system is another.
                Conceptually, you can think of the kernel source repositories as all the
                source files necessary for all the supported kernels.
                As a developer, you are just interested in the source files for the kernel on
                which you are working.
                And, furthermore, you need them available on your host system.
            </para>

            <para>
                Kernel source code is available on your host system a couple of different
                ways.
                If you are working in the kernel all the time, you probably would want
                to set up your own local Git repository of the kernel tree.
                If you just need to make some patches to the kernel, you can access
                temporary kernel source files that were extracted and used
                during a build.
                We will just talk about working with the temporary source code.
                For more information on how to get kernel source code onto your
                host system, see the
                "<link linkend='local-kernel-files'>Yocto Project Kernel</link>"
                bulleted item earlier in the manual.
            </para>

            <para>
                What happens during the build?
                When you build the kernel on your development system, all files needed for the build
                are taken from the source repositories pointed to by the
                <ulink url='&YOCTO_DOCS_REF_URL;#var-SRC_URI'><filename>SRC_URI</filename></ulink> variable
                and gathered in a temporary work area
                where they are subsequently used to create the unique kernel.
                Thus, in a sense, the process constructs a local source tree specific to your
                kernel to generate the new kernel image - a source generator if you will.
            </para>
                The following figure shows the temporary file structure
                created on your host system when the build occurs.
                This
                <link linkend='build-directory'>Build Directory</link> contains all the
                source files used during the build.
            </para>

            <para>
                <imagedata fileref="figures/kernel-overview-2-generic.png"
                    width="6in" depth="5in" align="center" scale="100" />
            </para>

            <para>
                Again, for additional information on the Yocto Project kernel's
                architecture and its branching strategy, see the
                <ulink url='&YOCTO_DOCS_KERNEL_DEV_URL;'>Yocto Project Linux Kernel Development Manual</ulink>.
                You can also reference the
                "<link linkend='patching-the-kernel'>Patching the Kernel</link>"
                section for a detailed example that modifies the kernel.
            </para>
        </section>

        <section id='kernel-modification-workflow'>
            <title>Kernel Modification Workflow</title>

            <para>
                This illustration and the following list summarizes the kernel modification general workflow.
            </para>

            <para>
                <imagedata fileref="figures/kernel-dev-flow.png"
                    width="6in" depth="5in" align="center" scalefit="1" />
            </para>

            <para>
                <orderedlist>
                    <listitem><para><emphasis>Set up your host development system to support
                        development using the Yocto Project</emphasis>:  See
                        "<ulink url='&YOCTO_DOCS_QS_URL;#the-linux-distro'>The Linux Distribution</ulink>" and
                        "<ulink url='&YOCTO_DOCS_QS_URL;#packages'>The Build Host Packages</ulink>" sections both
                        in the Yocto Project Quick Start for requirements.</para></listitem>
                    <listitem><para><emphasis>Establish a local copy of project files on your
                        system</emphasis>:  Having the <link linkend='source-directory'>Source
                        Directory</link> on your system gives you access to the build process and tools
                        you need.
                        For information on how to get these files, see the bulleted item
                        "<link linkend='local-yp-release'>Yocto Project Release</link>" earlier in this manual.
                        </para></listitem>
                    <listitem><para><emphasis>Establish the temporary kernel source files</emphasis>:
                        Temporary kernel source files are kept in the
                        <link linkend='build-directory'>Build Directory</link>
                        created by the
                        OpenEmbedded build system when you run BitBake.
                        If you have never built the kernel in which you are
                        interested, you need to run an initial build to
                        establish local kernel source files.</para>
                        <para>If you are building an image for the first time, you need to get the build
                        environment ready by sourcing an environment setup script
                        (i.e. <filename>oe-init-build-env</filename> or
                        <filename>oe-init-build-env-memres</filename>).
                        You also need to be sure two key configuration files
                        (<filename>local.conf</filename> and <filename>bblayers.conf</filename>)
                        are configured appropriately.</para>
                        <para>The entire process for building an image is overviewed in the
                        "<ulink url='&YOCTO_DOCS_QS_URL;#qs-building-images'>Building Images</ulink>"
                        section of the Yocto Project Quick Start.
                        You might want to reference this information.
                        You can find more information on BitBake in the
                        <ulink url='&YOCTO_DOCS_BB_URL;'>BitBake User Manual</ulink>.
                        </para>
                        <para>The build process supports several types of images to satisfy different needs.
                        See the "<ulink url='&YOCTO_DOCS_REF_URL;#ref-images'>Images</ulink>" chapter in
                        the Yocto Project Reference Manual for information on supported images.
                        </para></listitem>
                    <listitem><para><emphasis>Make changes to the kernel source code if
                        applicable</emphasis>:  Modifying the kernel does not always mean directly
                        changing source files.
                        However, if you have to do this, you make the changes to the files in the
                        Build Directory.</para></listitem>
                    <listitem><para><emphasis>Make kernel configuration changes if applicable</emphasis>:
                        If your situation calls for changing the kernel's
                        configuration, you can use
                        <ulink url='&YOCTO_DOCS_KERNEL_DEV_URL;#generating-configuration-files'><filename>menuconfig</filename></ulink>,
                        which allows you to interactively develop and test the
                        configuration changes you are making to the kernel.
                        Saving changes you make with
                        <filename>menuconfig</filename> updates
                        the kernel's <filename>.config</filename> file.
                        <note><title>Warning</title>
                            Try to resist the temptation to directly edit an
                            existing <filename>.config</filename> file, which is
                            found in the Build Directory among the source code
                            used for the build (e.g. see the bottom
                            illustration in the
                            "<link linkend='kernel-overview'>Kernel Overview</link>"
                            section).
                            Doing so, can produce unexpected results when the
                            OpenEmbedded build system regenerates the configuration
                            file.
                        </note>
                        Once you are satisfied with the configuration
                        changes made using <filename>menuconfig</filename>
                        and you have saved them, you can directly compare the
                        resulting <filename>.config</filename> file against an
                        existing original and gather those changes into a
                        <link linkend='creating-config-fragments'>configuration fragment file</link>
                        to be referenced from within the kernel's
                        <filename>.bbappend</filename> file.</para>

                        <para>Additionally, if you are working in a BSP layer
                        and need to modify the BSP's kernel's configuration,
                        you can use the
                        <ulink url='&YOCTO_DOCS_BSP_URL;#managing-kernel-patches-and-config-items-with-yocto-kernel'><filename>yocto-kernel</filename></ulink>
                        script as well as <filename>menuconfig</filename>.
                        The <filename>yocto-kernel</filename> script lets
                        you interactively set up kernel configurations.
                        </para></listitem>
                    <listitem><para><emphasis>Rebuild the kernel image with your changes</emphasis>:
                        Rebuilding the kernel image applies your changes.
                        </para></listitem>
                </orderedlist>
            </para>
        </section>
    </section>
</section>

<section id='application-development-workflow-using-an-sdk'>
    <title>Application Development Workflow Using an SDK</title>

    <para>
        Standard and extensible Software Development Kits (SDK) make it easy
        to develop applications inside or outside of the Yocto Project
        development environment.
        Tools exist to help the application developer during any phase
        of development.
        For information on how to install and use an SDK, see the
        <ulink url='&YOCTO_DOCS_SDK_URL;#sdk-intro'>Yocto Project Software Development Kit (SDK) Developer's Guide</ulink>.
    </para>
</section>

<section id="dev-modifying-source-code">
    <title>Modifying Source Code</title>

    <para>
        A common development workflow consists of modifying project source
        files that are external to the Yocto Project and then integrating
        that project's build output into an image built using the
        OpenEmbedded build system.
        Given this scenario, development engineers typically want to stick
        to their familiar project development tools and methods, which allows
        them to just focus on the project.
    </para>

    <para>
        Several workflows exist that allow you to develop, build, and test
        code that is going to be integrated into an image built using the
        OpenEmbedded build system.
        This section describes two:
        <itemizedlist>
            <listitem><para><emphasis><filename>devtool</filename>:</emphasis>
                A set of tools to aid in working on the source code built by
                the OpenEmbedded build system.
                Section
                "<link linkend='using-devtool-in-your-workflow'>Using <filename>devtool</filename> in Your Workflow</link>"
                describes this workflow.
                If you want more information that showcases the workflow, click
                <ulink url='https://drive.google.com/a/linaro.org/file/d/0B3KGzY5fW7laTDVxUXo3UDRvd2s/view'>here</ulink>
                for a presentation by Trevor Woerner that, while somewhat dated,
                provides detailed background information and a complete
                working tutorial.
                </para></listitem>
            <listitem><para><emphasis><ulink url='http://savannah.nongnu.org/projects/quilt'>Quilt</ulink>:</emphasis>
                A powerful tool that allows you to capture source
                code changes without having a clean source tree.
                While Quilt is not the preferred workflow of the two, this
                section includes it for users that are committed to using
                the tool.
                See the
                "<link linkend='using-a-quilt-workflow'>Using Quilt in Your Workflow</link>"
                section for more information.
                </para></listitem>
        </itemizedlist>
    </para>

    <section id='using-devtool-in-your-workflow'>
        <title>Using <filename>devtool</filename> in Your Workflow</title>

        <para>
            As mentioned earlier, <filename>devtool</filename> helps
            you easily develop projects whose build output must be part of
            an image built using the OpenEmbedded build system.
        </para>

        <para>
            Three entry points exist that allow you to develop using
            <filename>devtool</filename>:
            <itemizedlist>
                <listitem><para><emphasis><filename>devtool add</filename></emphasis>
                    </para></listitem>
                <listitem><para><emphasis><filename>devtool modify</filename></emphasis>
                    </para></listitem>
                <listitem><para><emphasis><filename>devtool upgrade</filename></emphasis>
                    </para></listitem>
            </itemizedlist>
        </para>

        <para>
            The remainder of this section presents these workflows.
            See the
            "<ulink url='&YOCTO_DOCS_REF_URL;#ref-devtool-reference'><filename>devtool</filename>&nbsp;Quick Reference</ulink>"
            in the Yocto Project Reference Manual for a
            <filename>devtool</filename> quick reference.
        </para>

        <section id='use-devtool-to-integrate-new-code'>
            <title>Use <filename>devtool add</filename> to Add an Application</title>

            <para>
                The <filename>devtool add</filename> command generates
                a new recipe based on existing source code.
                This command takes advantage of the
                <ulink url='&YOCTO_DOCS_DEV_URL;#devtool-the-workspace-layer-structure'>workspace</ulink>
                layer that many <filename>devtool</filename> commands
                use.
                The command is flexible enough to allow you to extract source
                code into both the workspace or a separate local Git repository
                and to use existing code that does not need to be extracted.
            </para>

            <para>
                Depending on your particular scenario, the arguments and options
                you use with <filename>devtool add</filename> form different
                combinations.
                The following diagram shows common development flows
                you would use with the <filename>devtool add</filename>
                command:
            </para>

            <para>
                <imagedata fileref="figures/devtool-add-flow.png" align="center" />
            </para>

            <para>
                <orderedlist>
                    <listitem><para><emphasis>Generating the New Recipe</emphasis>:
                        The top part of the flow shows three scenarios by which
                        you could use <filename>devtool add</filename> to
                        generate a recipe based on existing source code.</para>

                        <para>In a shared development environment, it is
                        typical where other developers are responsible for
                        various areas of source code.
                        As a developer, you are probably interested in using
                        that source code as part of your development using
                        the Yocto Project.
                        All you need is access to the code, a recipe, and a
                        controlled area in which to do your work.</para>

                        <para>Within the diagram, three possible scenarios
                        feed into the <filename>devtool add</filename> workflow:
                        <itemizedlist>
                            <listitem><para><emphasis>Left</emphasis>:
                                The left scenario represents a common situation
                                where the source code does not exist locally
                                and needs to be extracted.
                                In this situation, you just let it get
                                extracted to the default workspace - you do not
                                want it in some specific location outside of the
                                workspace.
                                Thus, everything you need will be located in the
                                workspace:
                                <literallayout class='monospaced'>
     $ devtool add <replaceable>recipe fetchuri</replaceable>
                                </literallayout>
                                With this command, <filename>devtool</filename>
                                creates a recipe and an append file in the
                                workspace as well as extracts the upstream
                                source files into a local Git repository also
                                within the <filename>sources</filename> folder.
                                </para></listitem>
                            <listitem><para><emphasis>Middle</emphasis>:
                                The middle scenario also represents a situation where
                                the source code does not exist locally.
                                In this case, the code is again upstream
                                and needs to be extracted to some
                                local area - this time outside of the default
                                workspace.
                                If required, <filename>devtool</filename>
                                always creates
                                a Git repository locally during the extraction.
                                Furthermore, the first positional argument
                                <replaceable>srctree</replaceable> in this case
                                identifies where the
                                <filename>devtool add</filename> command
                                will locate the extracted code outside of the
                                workspace:
                                <literallayout class='monospaced'>
     $ devtool add <replaceable>recipe srctree fetchuri</replaceable>
                                </literallayout>
                                In summary, the source code is pulled from
                                <replaceable>fetchuri</replaceable> and extracted
                                into the location defined by
                                <replaceable>srctree</replaceable> as a local
                                Git repository.</para>

                                <para>Within workspace, <filename>devtool</filename>
                                creates both the recipe and an append file
                                for the recipe.
                                </para></listitem>
                            <listitem><para><emphasis>Right</emphasis>:
                                The right scenario represents a situation
                                where the source tree (srctree) has been
                                previously prepared outside of the
                                <filename>devtool</filename> workspace.
                                </para>

                                <para>The following command names the recipe
                                and identifies where the existing source tree
                                is located:
                                <literallayout class='monospaced'>
     $ devtool add <replaceable>recipe srctree</replaceable>
                                </literallayout>
                                The command examines the source code and creates
                                a recipe for it placing the recipe into the
                                workspace.</para>

                                <para>Because the extracted source code already exists,
                                <filename>devtool</filename> does not try to
                                relocate it into the workspace - just the new
                                the recipe is placed in the workspace.</para>

                                <para>Aside from a recipe folder, the command
                                also creates an append folder and places an initial
                                <filename>*.bbappend</filename> within.
                                </para></listitem>
                        </itemizedlist>
                        </para></listitem>
                    <listitem><para><emphasis>Edit the Recipe</emphasis>:
                        At this point, you can use <filename>devtool edit-recipe</filename>
                        to open up the editor as defined by the
                        <filename>$EDITOR</filename> environment variable
                        and modify the file:
                        <literallayout class='monospaced'>
     $ devtool edit-recipe <replaceable>recipe</replaceable>
                        </literallayout>
                        From within the editor, you can make modifications to the
                        recipe that take affect when you build it later.
                        </para></listitem>
                    <listitem><para><emphasis>Build the Recipe or Rebuild the Image</emphasis>:
                        At this point in the flow, the next step you
                        take depends on what you are going to do with
                        the new code.</para>
                        <para>If you need to take the build output and eventually
                        move it to the target hardware, you would use
                        <filename>devtool build</filename>:
                        <literallayout class='monospaced'>
     $ devtool build <replaceable>recipe</replaceable>
                        </literallayout></para>
                        <para>On the other hand, if you want an image to
                        contain the recipe's packages for immediate deployment
                        onto a device (e.g. for testing purposes), you can use
                        the <filename>devtool build-image</filename> command:
                        <literallayout class='monospaced'>
     $ devtool build-image <replaceable>image</replaceable>
                        </literallayout>
                        </para></listitem>
                    <listitem><para><emphasis>Deploy the Build Output</emphasis>:
                        When you use the <filename>devtool build</filename>
                        command to build out your recipe, you probably want to
                        see if the resulting build output works as expected on target
                        hardware.
                        <note>
                            This step assumes you have a previously built
                            image that is already either running in QEMU or
                            running on actual hardware.
                            Also, it is assumed that for deployment of the image
                            to the target, SSH is installed in the image and if
                            the image is running on real hardware that you have
                            network access to and from your development machine.
                        </note>
                        You can deploy your build output to that target hardware by
                        using the <filename>devtool deploy-target</filename> command:
                        <literallayout class='monospaced'>
     $ devtool deploy-target <replaceable>recipe target</replaceable>
                        </literallayout>
                        The <replaceable>target</replaceable> is a live target machine
                        running as an SSH server.</para>

                        <para>You can, of course, also deploy the image you build
                        using the <filename>devtool build-image</filename> command
                        to actual hardware.
                        However, <filename>devtool</filename> does not provide a
                        specific command that allows you to do this.
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Finish Your Work With the Recipe</emphasis>:
                        The <filename>devtool finish</filename> command creates
                        any patches corresponding to commits in the local
                        Git repository, moves the new recipe to a more permanent
                        layer, and then resets the recipe so that the recipe is
                        built normally rather than from the workspace.
                        <literallayout class='monospaced'>
     $ devtool finish <replaceable>recipe layer</replaceable>
                        </literallayout>
                        <note>
                            Any changes you want to turn into patches must be
                            committed to the Git repository in the source tree.
                        </note></para>

                        <para>As mentioned, the <filename>devtool finish</filename>
                        command moves the final recipe to its permanent layer.
                        </para>

                        <para>As a final process of the
                        <filename>devtool finish</filename> command, the state
                        of the standard layers and the upstream source is
                        restored so that you can build the recipe from those
                        areas rather than the workspace.
                        <note>
                            You can use the <filename>devtool reset</filename>
                            command to put things back should you decide you
                            do not want to proceed with your work.
                            If you do use this command, realize that the source
                            tree is preserved.
                        </note>
                        </para></listitem>
                </orderedlist>
            </para>
        </section>

        <section id='devtool-use-devtool-modify-to-enable-work-on-code-associated-with-an-existing-recipe'>
            <title>Use <filename>devtool modify</filename> to Modify the Source of an Existing Component</title>

            <para>
                The <filename>devtool modify</filename> command prepares the
                way to work on existing code that already has a recipe in
                place.
                The command is flexible enough to allow you to extract code,
                specify the existing recipe, and keep track of and gather any
                patch files from other developers that are
                associated with the code.
            </para>

            <para>
                Depending on your particular scenario, the arguments and options
                you use with <filename>devtool modify</filename> form different
                combinations.
                The following diagram shows common development flows
                you would use with the <filename>devtool modify</filename>
                command:
            </para>

            <para>
                <imagedata fileref="figures/devtool-modify-flow.png" align="center" />
            </para>

            <para>
                <orderedlist>
                    <listitem><para><emphasis>Preparing to Modify the Code</emphasis>:
                        The top part of the flow shows three scenarios by which
                        you could use <filename>devtool modify</filename> to
                        prepare to work on source files.
                        Each scenario assumes the following:
                        <itemizedlist>
                            <listitem><para>The recipe exists in some layer external
                                to the <filename>devtool</filename> workspace.
                                </para></listitem>
                            <listitem><para>The source files exist upstream in an
                                un-extracted state or locally in a previously
                                extracted state.
                                </para></listitem>
                        </itemizedlist>
                        The typical situation is where another developer has
                        created some layer for use with the Yocto Project and
                        their recipe already resides in that layer.
                        Furthermore, their source code is readily available
                        either upstream or locally.
                        <itemizedlist>
                            <listitem><para><emphasis>Left</emphasis>:
                                The left scenario represents a common situation
                                where the source code does not exist locally
                                and needs to be extracted.
                                In this situation, the source is extracted
                                into the default workspace location.
                                The recipe, in this scenario, is in its own
                                layer outside the workspace
                                (i.e.
                                <filename>meta-</filename><replaceable>layername</replaceable>).
                                </para>

                                <para>The following command identifies the recipe
                                and by default extracts the source files:
                                <literallayout class='monospaced'>
     $ devtool modify <replaceable>recipe</replaceable>
                                </literallayout>
                                Once <filename>devtool</filename>locates the recipe,
                                it uses the
                                <ulink url='&YOCTO_DOCS_REF_URL;#var-SRC_URI'><filename>SRC_URI</filename></ulink>
                                variable to locate the source code and
                                any local patch files from other developers are
                                located.
                                <note>
                                    You cannot provide an URL for
                                    <replaceable>srctree</replaceable> when using the
                                    <filename>devtool modify</filename> command.
                                </note>
                                With this scenario, however, since no
                                <replaceable>srctree</replaceable> argument exists, the
                                <filename>devtool modify</filename> command by default
                                extracts the source files to a Git structure.
                                Furthermore, the location for the extracted source is the
                                default area within the workspace.
                                The result is that the command sets up both the source
                                code and an append file within the workspace with the
                                recipe remaining in its original location.
                                </para></listitem>
                            <listitem><para><emphasis>Middle</emphasis>:
                                The middle scenario represents a situation where
                                the source code also does not exist locally.
                                In this case, the code is again upstream
                                and needs to be extracted to some
                                local area as a Git repository.
                                The recipe, in this scenario, is again in its own
                                layer outside the workspace.</para>

                                <para>The following command tells
                                <filename>devtool</filename> what recipe with
                                which to work and, in this case, identifies a local
                                area for the extracted source files that is outside
                                of the default workspace:
                                <literallayout class='monospaced'>
     $ devtool modify <replaceable>recipe srctree</replaceable>
                                </literallayout>
                                As with all extractions, the command uses
                                the recipe's <filename>SRC_URI</filename> to locate the
                                source files.
                                Once the files are located, the command by default
                                extracts them.
                                Providing the <replaceable>srctree</replaceable>
                                argument instructs <filename>devtool</filename> where
                                to place the extracted source.</para>

                                <para>Within workspace, <filename>devtool</filename>
                                creates an append file for the recipe.
                                The recipe remains in its original location but
                                the source files are extracted to the location you
                                provided with <replaceable>srctree</replaceable>.
                                </para></listitem>
                            <listitem><para><emphasis>Right</emphasis>:
                                The right scenario represents a situation
                                where the source tree
                                (<replaceable>srctree</replaceable>) exists as a
                                previously extracted Git structure outside of
                                the <filename>devtool</filename> workspace.
                                In this example, the recipe also exists
                                elsewhere in its own layer.
                                </para>

                                <para>The following command tells
                                <filename>devtool</filename> the recipe
                                with which to work, uses the "-n" option to indicate
                                source does not need to be extracted, and uses
                                <replaceable>srctree</replaceable> to point to the
                                previously extracted source files:
                                <literallayout class='monospaced'>
     $ devtool modify -n <replaceable>recipe srctree</replaceable>
                                </literallayout>
                                </para>

                                <para>Once the command finishes, it creates only
                                an append file for the recipe in the workspace.
                                The recipe and the source code remain in their
                                original locations.
                                </para></listitem>
                            </itemizedlist>
                        </para></listitem>
                    <listitem><para><emphasis>Edit the Source</emphasis>:
                        Once you have used the <filename>devtool modify</filename>
                        command, you are free to make changes to the source
                        files.
                        You can use any editor you like to make and save
                        your source code modifications.
                        </para></listitem>
                    <listitem><para><emphasis>Build the Recipe</emphasis>:
                        Once you have updated the source files, you can build
                        the recipe.
                        </para></listitem>
                    <listitem><para><emphasis>Deploy the Build Output</emphasis>:
                        When you use the <filename>devtool build</filename>
                        command to build out your recipe, you probably want to see
                        if the resulting build output works as expected on target
                        hardware.
                        <note>
                            This step assumes you have a previously built
                            image that is already either running in QEMU or
                            running on actual hardware.
                            Also, it is assumed that for deployment of the image
                            to the target, SSH is installed in the image and if
                            the image is running on real hardware that you have
                            network access to and from your development machine.
                        </note>
                        You can deploy your build output to that target hardware by
                        using the <filename>devtool deploy-target</filename> command:
                        <literallayout class='monospaced'>
     $ devtool deploy-target <replaceable>recipe target</replaceable>
                        </literallayout>
                        The <replaceable>target</replaceable> is a live target machine
                        running as an SSH server.</para>

                        <para>You can, of course, also deploy the image you build
                        using the <filename>devtool build-image</filename> command
                        to actual hardware.
                        However, <filename>devtool</filename> does not provide a
                        specific command that allows you to do this.
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Finish Your Work With the Recipe</emphasis>:
                        The <filename>devtool finish</filename> command creates
                        any patches corresponding to commits in the local
                        Git repository, updates the recipe to point to them
                        (or creates a <filename>.bbappend</filename> file to do
                        so, depending on the specified destination layer), and
                        then resets the recipe so that the recipe is built normally
                        rather than from the workspace.
                        <literallayout class='monospaced'>
     $ devtool finish <replaceable>recipe layer</replaceable>
                        </literallayout>
                        <note>
                            Any changes you want to turn into patches must be
                            committed to the Git repository in the source tree.
                        </note></para>

                        <para>Because there is no need to move the recipe,
                        <filename>devtool finish</filename> either updates the
                        original recipe in the original layer or the command
                        creates a <filename>.bbappend</filename> in a different
                        layer as provided by <replaceable>layer</replaceable>.
                        </para>

                        <para>As a final process of the
                        <filename>devtool finish</filename> command, the state
                        of the standard layers and the upstream source is
                        restored so that you can build the recipe from those
                        areas rather than the workspace.
                        <note>
                            You can use the <filename>devtool reset</filename>
                            command to put things back should you decide you
                            do not want to proceed with your work.
                            If you do use this command, realize that the source
                            tree is preserved.
                        </note>
                        </para></listitem>
                </orderedlist>
            </para>
        </section>

        <section id='devtool-use-devtool-upgrade-to-create-a-version-of-the-recipe-that-supports-a-newer-version-of-the-software'>
            <title>Use <filename>devtool upgrade</filename> to Create a Version of the Recipe that Supports a Newer Version of the Software</title>

            <para>
                The <filename>devtool upgrade</filename> command updates
                an existing recipe so that you can build it for an updated
                set of source files.
                The command is flexible enough to allow you to specify
                source code revision and versioning schemes, extract code into
                or out of the <filename>devtool</filename> workspace, and
                work with any source file forms that the fetchers support.
            </para>

            <para>
                The following diagram shows the common development flow
                you would use with the <filename>devtool upgrade</filename>
                command:
            </para>

            <para>
                <imagedata fileref="figures/devtool-upgrade-flow.png" align="center" />
            </para>

            <para>
                <orderedlist>
                    <listitem><para><emphasis>Initiate the Upgrade</emphasis>:
                        The top part of the flow shows a typical scenario by which
                        you could use <filename>devtool upgrade</filename>.
                        The following conditions exist:
                        <itemizedlist>
                            <listitem><para>The recipe exists in some layer external
                                to the <filename>devtool</filename> workspace.
                                </para></listitem>
                            <listitem><para>The source files for the new release
                                exist adjacent to the same location pointed to by
                                <ulink url='&YOCTO_DOCS_REF_URL;#var-SRC_URI'><filename>SRC_URI</filename></ulink>
                                in the recipe (e.g. a tarball with the new version
                                number in the name, or as a different revision in
                                the upstream Git repository).
                                </para></listitem>
                        </itemizedlist>
                        A common situation is where third-party software has
                        undergone a revision so that it has been upgraded.
                        The recipe you have access to is likely in your own layer.
                        Thus, you need to upgrade the recipe to use the
                        newer version of the software:
                        <literallayout class='monospaced'>
     $ devtool upgrade -V <replaceable>version recipe</replaceable>
                        </literallayout>
                        By default, the <filename>devtool upgrade</filename> command
                        extracts source code into the <filename>sources</filename>
                        directory in the workspace.
                        If you want the code extracted to any other location, you
                        need to provide the <replaceable>srctree</replaceable>
                        positional argument with the command as follows:
                        <literallayout class='monospaced'>
     $ devtool upgrade -V <replaceable>version recipe srctree</replaceable>
                        </literallayout>
                        Also, in this example, the "-V" option is used to specify
                        the new version.
                        If the source files pointed to by the
                        <filename>SRC_URI</filename> statement in the recipe are
                        in a Git repository, you must provide the "-S" option and
                        specify a revision for the software.</para>

                        <para>Once <filename>devtool</filename> locates the recipe,
                        it uses the <filename>SRC_URI</filename> variable to locate
                        the source code and any local patch files from other
                        developers are located.
                        The result is that the command sets up the source
                        code, the new version of the recipe, and an append file
                        all within the workspace.
                        </para></listitem>
                    <listitem><para><emphasis>Resolve any Conflicts created by the Upgrade</emphasis>:
                        At this point, there could be some conflicts due to the
                        software being upgraded to a new version.
                        This would occur if your recipe specifies some patch files in
                        <filename>SRC_URI</filename> that conflict with changes
                        made in the new version of the software.
                        If this is the case, you need to resolve the conflicts
                        by editing the source and following the normal
                        <filename>git rebase</filename> conflict resolution
                        process.</para>

                        <para>Before moving onto the next step, be sure to resolve any
                        such conflicts created through use of a newer or different
                        version of the software.
                        </para></listitem>
                    <listitem><para><emphasis>Build the Recipe</emphasis>:
                        Once you have your recipe in order, you can build it.
                        You can either use <filename>devtool build</filename> or
                        <filename>bitbake</filename>.
                        Either method produces build output that is stored
                        in
                        <ulink url='&YOCTO_DOCS_REF_URL;#var-TMPDIR'><filename>TMPDIR</filename></ulink>.
                        </para></listitem>
                    <listitem><para><emphasis>Deploy the Build Output</emphasis>:
                        When you use the <filename>devtool build</filename>
                        command or <filename>bitbake</filename> to build out your
                        recipe, you probably want to see if the resulting build
                        output works as expected on target hardware.
                        <note>
                            This step assumes you have a previously built
                            image that is already either running in QEMU or
                            running on actual hardware.
                            Also, it is assumed that for deployment of the image
                            to the target, SSH is installed in the image and if
                            the image is running on real hardware that you have
                            network access to and from your development machine.
                        </note>
                        You can deploy your build output to that target hardware by
                        using the <filename>devtool deploy-target</filename> command:
                        <literallayout class='monospaced'>
     $ devtool deploy-target <replaceable>recipe target</replaceable>
                        </literallayout>
                        The <replaceable>target</replaceable> is a live target machine
                        running as an SSH server.</para>

                        <para>You can, of course, also deploy the image you build
                        using the <filename>devtool build-image</filename> command
                        to actual hardware.
                        However, <filename>devtool</filename> does not provide a
                        specific command that allows you to do this.
                        </para></listitem>
                    <listitem><para>
                        <emphasis>Finish Your Work With the Recipe</emphasis>:
                        The <filename>devtool finish</filename> command creates
                        any patches corresponding to commits in the local
                        Git repository, moves the new recipe to a more permanent
                        layer, and then resets the recipe so that the recipe is
                        built normally rather than from the workspace.
                        If you specify a destination layer that is the same as
                        the original source, then the old version of the
                        recipe and associated files will be removed prior to
                        adding the new version.
                        <literallayout class='monospaced'>
     $ devtool finish <replaceable>recipe layer</replaceable>
                        </literallayout>
                        <note>
                            Any changes you want to turn into patches must be
                            committed to the Git repository in the source tree.
                        </note></para>
                        <para>As a final process of the
                        <filename>devtool finish</filename> command, the state
                        of the standard layers and the upstream source is
                        restored so that you can build the recipe from those
                        areas rather than the workspace.
                        <note>
                            You can use the <filename>devtool reset</filename>
                            command to put things back should you decide you
                            do not want to proceed with your work.
                            If you do use this command, realize that the source
                            tree is preserved.
                        </note>
                        </para></listitem>
                </orderedlist>
            </para>
        </section>
    </section>

    <section id="using-a-quilt-workflow">
        <title>Using Quilt in Your Workflow</title>

        <para>
            <ulink url='http://savannah.nongnu.org/projects/quilt'>Quilt</ulink>
            is a powerful tool that allows you to capture source code changes
            without having a clean source tree.
            This section outlines the typical workflow you can use to modify
            source code, test changes, and then preserve the changes in the
            form of a patch all using Quilt.
            <note><title>Tip</title>
                With regard to preserving changes to source files if you
                clean a recipe or have <filename>rm_work</filename> enabled,
                the workflow described in the
                "<link linkend='using-devtool-in-your-workflow'>Using <filename>devtool</filename> in Your Workflow</link>"
                section is a safer development flow than than the flow that
                uses Quilt.
            </note>
        </para>

        <para>
            Follow these general steps:
            <orderedlist>
                <listitem><para><emphasis>Find the Source Code:</emphasis>
                    Temporary source code used by the OpenEmbedded build system
                    is kept in the
                    <link linkend='build-directory'>Build Directory</link>.
                    See the
                    "<link linkend='finding-the-temporary-source-code'>Finding Temporary Source Code</link>"
                    section to learn how to locate the directory that has the
                    temporary source code for a particular package.
                    </para></listitem>
                <listitem><para><emphasis>Change Your Working Directory:</emphasis>
                    You need to be in the directory that has the temporary source code.
                    That directory is defined by the
                    <ulink url='&YOCTO_DOCS_REF_URL;#var-S'><filename>S</filename></ulink>
                    variable.</para></listitem>
                <listitem><para><emphasis>Create a New Patch:</emphasis>
                    Before modifying source code, you need to create a new patch.
                    To create a new patch file, use <filename>quilt new</filename> as below:
                    <literallayout class='monospaced'>
     $ quilt new my_changes.patch
                    </literallayout></para></listitem>
                <listitem><para><emphasis>Notify Quilt and Add Files:</emphasis>
                    After creating the patch, you need to notify Quilt about the files
                    you plan to edit.
                    You notify Quilt by adding the files to the patch you just created:
                    <literallayout class='monospaced'>
     $ quilt add file1.c file2.c file3.c
                    </literallayout>
                    </para></listitem>
                <listitem><para><emphasis>Edit the Files:</emphasis>
                    Make your changes in the source code to the files you added
                    to the patch.
                    </para></listitem>
                <listitem><para><emphasis>Test Your Changes:</emphasis>
                    Once you have modified the source code, the easiest way to
                    your changes is by calling the
                    <filename>do_compile</filename> task as shown in the
                    following example:
                    <literallayout class='monospaced'>
     $ bitbake -c compile -f <replaceable>package</replaceable>
                    </literallayout>
                    The <filename>-f</filename> or <filename>--force</filename>
                    option forces the specified task to execute.
                    If you find problems with your code, you can just keep editing and
                    re-testing iteratively until things work as expected.
                    <note>All the modifications you make to the temporary source code
                    disappear once you run the
                    <ulink url='&YOCTO_DOCS_REF_URL;#ref-tasks-clean'><filename>do_clean</filename></ulink>
                    or
                    <ulink url='&YOCTO_DOCS_REF_URL;#ref-tasks-cleanall'><filename>do_cleanall</filename></ulink>
                    tasks using BitBake (i.e.
                    <filename>bitbake -c clean <replaceable>package</replaceable></filename>
                    and
                    <filename>bitbake -c cleanall <replaceable>package</replaceable></filename>).
                    Modifications will also disappear if you use the <filename>rm_work</filename>
                    feature as described in the
                    "<ulink url='&YOCTO_DOCS_QS_URL;#qs-building-images'>Building Images</ulink>"
                    section of the Yocto Project Quick Start.
                    </note></para></listitem>
                <listitem><para><emphasis>Generate the Patch:</emphasis>
                    Once your changes work as expected, you need to use Quilt to generate the final patch that
                    contains all your modifications.
                    <literallayout class='monospaced'>
     $ quilt refresh
                    </literallayout>
                    At this point, the <filename>my_changes.patch</filename> file has all your edits made
                    to the <filename>file1.c</filename>, <filename>file2.c</filename>, and
                    <filename>file3.c</filename> files.</para>
                    <para>You can find the resulting patch file in the <filename>patches/</filename>
                    subdirectory of the source (<filename>S</filename>) directory.</para></listitem>
                <listitem><para><emphasis>Copy the Patch File:</emphasis>
                    For simplicity, copy the patch file into a directory named <filename>files</filename>,
                    which you can create in the same directory that holds the recipe
                    (<filename>.bb</filename>) file or the
                    append (<filename>.bbappend</filename>) file.
                    Placing the patch here guarantees that the OpenEmbedded build system will find
                    the patch.
                    Next, add the patch into the
                    <filename><ulink url='&YOCTO_DOCS_REF_URL;#var-SRC_URI'>SRC_URI</ulink></filename>
                    of the recipe.
                    Here is an example:
                    <literallayout class='monospaced'>
     SRC_URI += "file://my_changes.patch"
                    </literallayout></para></listitem>
            </orderedlist>
        </para>
    </section>

    <section id='finding-the-temporary-source-code'>
        <title>Finding Temporary Source Code</title>

        <para>
            You might find it helpful during development to modify the
            temporary source code used by recipes to build packages.
            For example, suppose you are developing a patch and you need to
            experiment a bit to figure out your solution.
            After you have initially built the package, you can iteratively
            tweak the source code, which is located in the
            <link linkend='build-directory'>Build Directory</link>, and then
            you can force a re-compile and quickly test your altered code.
            Once you settle on a solution, you can then preserve your changes
            in the form of patches.
            If you are using Quilt for development, see the
            "<link linkend='using-a-quilt-workflow'>Using Quilt in Your Workflow</link>"
            section for more information.
        </para>

        <para>
            During a build, the unpacked temporary source code used by recipes
            to build packages is available in the Build Directory as
            defined by the
            <filename><ulink url='&YOCTO_DOCS_REF_URL;#var-S'>S</ulink></filename> variable.
            Below is the default value for the <filename>S</filename> variable as defined in the
            <filename>meta/conf/bitbake.conf</filename> configuration file in the
            <link linkend='source-directory'>Source Directory</link>:
            <literallayout class='monospaced'>
     S = "${WORKDIR}/${BP}"
            </literallayout>
            You should be aware that many recipes override the <filename>S</filename> variable.
            For example, recipes that fetch their source from Git usually set
            <filename>S</filename> to <filename>${WORKDIR}/git</filename>.
            <note>
                The
                <ulink url='&YOCTO_DOCS_REF_URL;#var-BP'><filename>BP</filename></ulink>
                represents the base recipe name, which consists of the name and version:
                <literallayout class='monospaced'>
     BP = "${BPN}-${PV}"
                </literallayout>
            </note>
        </para>

        <para>
            The path to the work directory for the recipe
            (<ulink url='&YOCTO_DOCS_REF_URL;#var-WORKDIR'><filename>WORKDIR</filename></ulink>)
            is defined as follows:
            <literallayout class='monospaced'>
     ${TMPDIR}/work/${MULTIMACH_TARGET_SYS}/${PN}/${EXTENDPE}${PV}-${PR}
            </literallayout>
            The actual directory depends on several things:
            <itemizedlist>
                <listitem><ulink url='&YOCTO_DOCS_REF_URL;#var-TMPDIR'><filename>TMPDIR</filename></ulink>:
                    The top-level build output directory</listitem>
                <listitem><ulink url='&YOCTO_DOCS_REF_URL;#var-MULTIMACH_TARGET_SYS'><filename>MULTIMACH_TARGET_SYS</filename></ulink>:
                    The target system identifier</listitem>
                <listitem><ulink url='&YOCTO_DOCS_REF_URL;#var-PN'><filename>PN</filename></ulink>:
                    The recipe name</listitem>
                <listitem><ulink url='&YOCTO_DOCS_REF_URL;#var-EXTENDPE'><filename>EXTENDPE</filename></ulink>:
                    The epoch - (if
                    <ulink url='&YOCTO_DOCS_REF_URL;#var-PE'><filename>PE</filename></ulink>
                    is not specified, which is usually the case for most
                    recipes, then <filename>EXTENDPE</filename> is blank)</listitem>
                <listitem><ulink url='&YOCTO_DOCS_REF_URL;#var-PV'><filename>PV</filename></ulink>:
                    The recipe version</listitem>
                <listitem><ulink url='&YOCTO_DOCS_REF_URL;#var-PR'><filename>PR</filename></ulink>:
                    The recipe revision</listitem>
            </itemizedlist>
        </para>

        <para>
            As an example, assume a Source Directory top-level folder
            named <filename>poky</filename>, a default Build Directory at
            <filename>poky/build</filename>, and a
            <filename>qemux86-poky-linux</filename> machine target
            system.
            Furthermore, suppose your recipe is named
            <filename>foo_1.3.0.bb</filename>.
            In this case, the work directory the build system uses to
            build the package would be as follows:
            <literallayout class='monospaced'>
     poky/build/tmp/work/qemux86-poky-linux/foo/1.3.0-r0
            </literallayout>
        </para>

        <para>
            Now that you know where to locate the directory that has the
            temporary source code, you can use a Quilt as described in section
            "<link linkend='using-a-quilt-workflow'>Using Quilt in Your Workflow</link>"
            to make your edits, test the changes, and preserve the changes in
            the form of patches.
        </para>
    </section>
</section>

<section id='image-development-using-toaster'>
    <title>Image Development Using Toaster</title>

    <para>
        Toaster is a web interface to the Yocto Project's OpenEmbedded build
        system.
        You can initiate builds using Toaster as well as examine the results
        and statistics of builds.
        See the
        <ulink url='&YOCTO_DOCS_TOAST_URL;#toaster-manual-intro'>Toaster User Manual</ulink>
        for information on how to set up and use Toaster to build images.
    </para>
</section>

<section id="platdev-appdev-devshell">
    <title>Using a Development Shell</title>

    <para>
        When debugging certain commands or even when just editing packages,
        <filename>devshell</filename> can be a useful tool.
        When you invoke <filename>devshell</filename>, all tasks up to and
        including
        <ulink url='&YOCTO_DOCS_REF_URL;#ref-tasks-patch'><filename>do_patch</filename></ulink>
        are run for the specified target.
        Then, a new terminal is opened and you are placed in
        <filename>${</filename><ulink url='&YOCTO_DOCS_REF_URL;#var-S'><filename>S</filename></ulink><filename>}</filename>,
        the source directory.
        In the new terminal, all the OpenEmbedded build-related environment variables are
        still defined so you can use commands such as <filename>configure</filename> and
        <filename>make</filename>.
        The commands execute just as if the OpenEmbedded build system were executing them.
        Consequently, working this way can be helpful when debugging a build or preparing
        software to be used with the OpenEmbedded build system.
    </para>

    <para>
        Following is an example that uses <filename>devshell</filename> on a target named
        <filename>matchbox-desktop</filename>:
        <literallayout class='monospaced'>
     $ bitbake matchbox-desktop -c devshell
        </literallayout>
    </para>

    <para>
        This command spawns a terminal with a shell prompt within the OpenEmbedded build environment.
        The <ulink url='&YOCTO_DOCS_REF_URL;#var-OE_TERMINAL'><filename>OE_TERMINAL</filename></ulink>
        variable controls what type of shell is opened.
    </para>

    <para>
        For spawned terminals, the following occurs:
        <itemizedlist>
            <listitem><para>The <filename>PATH</filename> variable includes the
                cross-toolchain.</para></listitem>
            <listitem><para>The <filename>pkgconfig</filename> variables find the correct
                <filename>.pc</filename> files.</para></listitem>
                <listitem><para>The <filename>configure</filename> command finds the
                Yocto Project site files as well as any other necessary files.</para></listitem>
        </itemizedlist>
    </para>

    <para>
        Within this environment, you can run configure or compile
        commands as if they were being run by
        the OpenEmbedded build system itself.
        As noted earlier, the working directory also automatically changes to the
        Source Directory (<ulink url='&YOCTO_DOCS_REF_URL;#var-S'><filename>S</filename></ulink>).
    </para>

    <para>
        To manually run a specific task using <filename>devshell</filename>,
        run the corresponding <filename>run.*</filename> script in
        the
        <filename>${</filename><ulink url='&YOCTO_DOCS_REF_URL;#var-WORKDIR'><filename>WORKDIR</filename></ulink><filename>}/temp</filename>
        directory (e.g.,
        <filename>run.do_configure.</filename><replaceable>pid</replaceable>).
        If a task's script does not exist, which would be the case if the task was
        skipped by way of the sstate cache, you can create the task by first running
        it outside of the <filename>devshell</filename>:
        <literallayout class='monospaced'>
     $ bitbake -c <replaceable>task</replaceable>
        </literallayout>
        <note><title>Notes</title>
            <itemizedlist>
                <listitem><para>Execution of a task's <filename>run.*</filename>
                    script and BitBake's execution of a task are identical.
                    In other words, running the script re-runs the task
                    just as it would be run using the
                    <filename>bitbake -c</filename> command.
                    </para></listitem>
                <listitem><para>Any <filename>run.*</filename> file that does not
                    have a <filename>.pid</filename> extension is a
                    symbolic link (symlink) to the most recent version of that
                    file.
                    </para></listitem>
            </itemizedlist>
        </note>
    </para>

    <para>
        Remember, that the <filename>devshell</filename> is a mechanism that allows
        you to get into the BitBake task execution environment.
        And as such, all commands must be called just as BitBake would call them.
        That means you need to provide the appropriate options for
        cross-compilation and so forth as applicable.
    </para>

    <para>
        When you are finished using <filename>devshell</filename>, exit the shell
        or close the terminal window.
    </para>

    <note><title>Notes</title>
        <itemizedlist>
            <listitem><para>
                It is worth remembering that when using <filename>devshell</filename>
                you need to use the full compiler name such as <filename>arm-poky-linux-gnueabi-gcc</filename>
                instead of just using <filename>gcc</filename>.
                The same applies to other applications such as <filename>binutils</filename>,
                <filename>libtool</filename> and so forth.
                BitBake sets up environment variables such as <filename>CC</filename>
                to assist applications, such as <filename>make</filename> to find the correct tools.
                </para></listitem>
            <listitem><para>
                It is also worth noting that <filename>devshell</filename> still works over
                X11 forwarding and similar situations.
                </para></listitem>
        </itemizedlist>
    </note>
</section>

<section id="platdev-appdev-devpyshell">
    <title>Using a Development Python Shell</title>

    <para>
        Similar to working within a development shell as described in
        the previous section, you can also spawn and work within an
        interactive Python development shell.
        When debugging certain commands or even when just editing packages,
        <filename>devpyshell</filename> can be a useful tool.
        When you invoke <filename>devpyshell</filename>, all tasks up to and
        including
        <ulink url='&YOCTO_DOCS_REF_URL;#ref-tasks-patch'><filename>do_patch</filename></ulink>
        are run for the specified target.
        Then a new terminal is opened.
        Additionally, key Python objects and code are available in the same
        way they are to BitBake tasks, in particular, the data store 'd'.
        So, commands such as the following are useful when exploring the data
        store and running functions:
        <literallayout class='monospaced'>
     pydevshell> d.getVar("STAGING_DIR", True)
     '/media/build1/poky/build/tmp/sysroots'
     pydevshell> d.getVar("STAGING_DIR", False)
     '${TMPDIR}/sysroots'
     pydevshell> d.setVar("FOO", "bar")
     pydevshell> d.getVar("FOO", True)
     'bar'
     pydevshell> d.delVar("FOO")
     pydevshell> d.getVar("FOO", True)
     pydevshell> bb.build.exec_func("do_unpack", d)
     pydevshell>
        </literallayout>
        The commands execute just as if the OpenEmbedded build system were executing them.
        Consequently, working this way can be helpful when debugging a build or preparing
        software to be used with the OpenEmbedded build system.
    </para>

    <para>
        Following is an example that uses <filename>devpyshell</filename> on a target named
        <filename>matchbox-desktop</filename>:
        <literallayout class='monospaced'>
     $ bitbake matchbox-desktop -c devpyshell
        </literallayout>
    </para>

    <para>
        This command spawns a terminal and places you in an interactive
        Python interpreter within the OpenEmbedded build environment.
        The <ulink url='&YOCTO_DOCS_REF_URL;#var-OE_TERMINAL'><filename>OE_TERMINAL</filename></ulink>
        variable controls what type of shell is opened.
    </para>

    <para>
        When you are finished using <filename>devpyshell</filename>, you
        can exit the shell either by using Ctrl+d or closing the terminal
        window.
    </para>
</section>

</chapter>