blob: 9add72cf3b8058815d4cc3d7bd58db8bec9f3199 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
|
.. SPDX-License-Identifier: CC-BY-SA-2.0-UK
Flashing Images Using ``bmaptool``
**********************************
A fast and easy way to flash an image to a bootable device is to use
Bmaptool, which is integrated into the OpenEmbedded build system.
Bmaptool is a generic tool that creates a file's block map (bmap) and
then uses that map to copy the file. As compared to traditional tools
such as dd or cp, Bmaptool can copy (or flash) large files like raw
system image files much faster.
.. note::
- If you are using Ubuntu or Debian distributions, you can install
the ``bmap-tools`` package using the following command and then
use the tool without specifying ``PATH`` even from the root
account::
$ sudo apt install bmap-tools
- If you are unable to install the ``bmap-tools`` package, you will
need to build Bmaptool before using it. Use the following command::
$ bitbake bmap-tools-native
Following, is an example that shows how to flash a Wic image. Realize
that while this example uses a Wic image, you can use Bmaptool to flash
any type of image. Use these steps to flash an image using Bmaptool:
#. *Update your local.conf File:* You need to have the following set
in your ``local.conf`` file before building your image::
IMAGE_FSTYPES += "wic wic.bmap"
#. *Get Your Image:* Either have your image ready (pre-built with the
:term:`IMAGE_FSTYPES`
setting previously mentioned) or take the step to build the image::
$ bitbake image
#. *Flash the Device:* Flash the device with the image by using Bmaptool
depending on your particular setup. The following commands assume the
image resides in the :term:`Build Directory`'s ``deploy/images/`` area:
- If you have write access to the media, use this command form::
$ oe-run-native bmap-tools-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
- If you do not have write access to the media, set your permissions
first and then use the same command form::
$ sudo chmod 666 /dev/sdX
$ oe-run-native bmap-tools-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
For help on the ``bmaptool`` command, use the following command::
$ bmaptool --help
|
