path: root/documentation/adt-manual/adt-prepare.xml

<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
[<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] >

<chapter id='adt-prepare'>

<title>Preparing for Application Development</title>

<para>
    In order to develop applications, you need set up your host development system.
    Several ways exist that allow you to install cross-development tools, QEMU, the
    Eclipse Yocto Plug-in, and other tools.
    This chapter describes how to prepare for application development.
</para>

<section id='installing-the-adt'>
    <title>Installing the ADT and Toolchains</title>

    <para>
        The following list describes installation methods that set up varying degrees of tool
        availability on your system.
        Regardless of the installation method you choose,
        you must <filename>source</filename> the cross-toolchain
        environment setup script before you use a toolchain.
        See the "<link linkend='setting-up-the-cross-development-environment'>Setting Up the
        Cross-Development Environment</link>" section for more information.
    </para>

    <note>
        <para>Avoid mixing installation methods when installing toolchains for different architectures.
        For example, avoid using the ADT Installer to install some toolchains and then hand-installing
        cross-development toolchains by running the toolchain installer for different architectures.
        Mixing installation methods can result in situations where the ADT Installer becomes
        unreliable and might not install the toolchain.</para>
        <para>If you must mix installation methods, you might avoid problems by deleting
        <filename>/var/lib/opkg</filename>, thus purging the <filename>opkg</filename> package
        metadata</para>
    </note>

    <para>
        <itemizedlist>
            <listitem><para><emphasis>Use the ADT installer script:</emphasis>
                This method is the recommended way to install the ADT because it
                automates much of the process for you.
                For example, you can configure the installation to install the QEMU emulator
                and the user-space NFS, specify which root filesystem profiles to download,
                and define the target sysroot location.</para></listitem>
            <listitem><para><emphasis>Use an existing toolchain:</emphasis>
                Using this method, you select and download an architecture-specific
                toolchain installer and then run the script to hand-install the toolchain.
                If you use this method, you just get the cross-toolchain and QEMU - you do not
                get any of the other mentioned benefits had you run the ADT Installer script.</para></listitem>
            <listitem><para><emphasis>Use the toolchain from within the Build Directory:</emphasis>
                If you already have a
                <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>,
                you can build the cross-toolchain within the directory.
                However, like the previous method mentioned, you only get the cross-toolchain and QEMU - you
                do not get any of the other benefits without taking separate steps.</para></listitem>
        </itemizedlist>
    </para>

    <section id='using-the-adt-installer'>
        <title>Using the ADT Installer</title>

        <para>
            To run the ADT Installer, you need to get the ADT Installer tarball, be sure
            you have the necessary host development packages that support the ADT Installer,
            and then run the ADT Installer Script.
        </para>

        <para>
            For a list of the host packages needed to support ADT installation and use, see the
            "ADT Installer Extras" lists in the
            "<ulink url='&YOCTO_DOCS_REF_URL;#required-packages-for-the-host-development-system'>Required Packages for the Host Development System</ulink>" section
            of the Yocto Project Reference Manual.
        </para>

        <section id='getting-the-adt-installer-tarball'>
            <title>Getting the ADT Installer Tarball</title>

            <para>
                The ADT Installer is contained in the ADT Installer tarball.
                You can get the tarball using either of these methods:
                <itemizedlist>
                    <listitem><para><emphasis>Download the Tarball:</emphasis>
                        You can download the tarball from
                        <ulink url='&YOCTO_ADTINSTALLER_DL_URL;'></ulink> into
                        any directory.</para></listitem>
                    <listitem><para><emphasis>Build the Tarball:</emphasis>
                        You can use BitBake to generate the tarball inside an
                        existing
                        <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
                        </para>
                        <para>If you use BitBake to generate the ADT Installer
                        tarball, you must <filename>source</filename> the
                        environment setup script
                        (<ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>
                        or
                        <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>)
                        located in the Source Directory before running the
                        BitBake command that creates the tarball.</para>
                        <para>The following example commands establish
                        the
                        <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>,
                        check out the current release branch, set up the
                        build environment while also creating the default
                        Build Directory, and run the BitBake command that
                        results in the tarball
                        <filename>~/yocto-project/build/tmp/deploy/sdk/adt_installer.tar.bz2</filename>:
                        <note>
                            Before using BitBake to build the ADT tarball, be
                            sure to make sure your
                            <filename>local.conf</filename> file is properly
                            configured.
                        </note>
                        <literallayout class='monospaced'>
     $ cd ~
     $ git clone git://git.yoctoproject.org/poky
     $ cd poky
     $ git checkout -b &DISTRO_NAME; origin/&DISTRO_NAME;
     $ source &OE_INIT_FILE;
     $ bitbake adt-installer
                        </literallayout></para></listitem>
                </itemizedlist>
            </para>
        </section>

        <section id='configuring-and-running-the-adt-installer-script'>
            <title>Configuring and Running the ADT Installer Script</title>

            <para>
                Before running the ADT Installer script, you need to unpack the tarball.
                You can unpack the tarball in any directory you wish.
                For example, this command copies the ADT Installer tarball from where
                it was built into the home directory and then unpacks the tarball into
                a top-level directory named <filename>adt-installer</filename>:
                <literallayout class='monospaced'>
     $ cd ~
     $ cp ~/poky/build/tmp/deploy/sdk/adt_installer.tar.bz2 $HOME
     $ tar -xjf adt_installer.tar.bz2
                </literallayout>
                Unpacking it creates the directory <filename>adt-installer</filename>,
                which contains the ADT Installer script (<filename>adt_installer</filename>)
                and its configuration file (<filename>adt_installer.conf</filename>).
            </para>

            <para>
                Before you run the script, however, you should examine the ADT Installer configuration
                file and be sure you are going to get what you want.
                Your configurations determine which kernel and filesystem image are downloaded.
            </para>

            <para>
                The following list describes the configurations you can define for the ADT Installer.
                For configuration values and restrictions, see the comments in
                the <filename>adt-installer.conf</filename> file:

                <itemizedlist>
                    <listitem><para><filename>YOCTOADT_REPO</filename>: This area
                        includes the IPKG-based packages and the root filesystem upon which
                        the installation is based.
                        If you want to set up your own IPKG repository pointed to by
                        <filename>YOCTOADT_REPO</filename>, you need to be sure that the
                        directory structure follows the same layout as the reference directory
                        set up at <ulink url='http://adtrepo.yoctoproject.org'></ulink>.
                        Also, your repository needs to be accessible through HTTP.</para></listitem>
                    <listitem><para><filename>YOCTOADT_TARGETS</filename>: The machine
                        target architectures for which you want to set up cross-development
                        environments.</para></listitem>
                    <listitem><para><filename>YOCTOADT_QEMU</filename>: Indicates whether
                        or not to install the emulator QEMU.</para></listitem>
                    <listitem><para><filename>YOCTOADT_NFS_UTIL</filename>: Indicates whether
                        or not to install user-mode NFS.
                        If you plan to use the Eclipse IDE Yocto plug-in against QEMU,
                        you should install NFS.
                        <note>To boot QEMU images using our userspace NFS server, you need
                            to be running <filename>portmap</filename> or <filename>rpcbind</filename>.
                            If you are running <filename>rpcbind</filename>, you will also need to add the
                            <filename>-i</filename> option when <filename>rpcbind</filename> starts up.
                            Please make sure you understand the security implications of doing this.
                            You might also have to modify your firewall settings to allow
                            NFS booting to work.</note></para></listitem>
                    <listitem><para><filename>YOCTOADT_ROOTFS_&lt;arch&gt;</filename>: The root
                        filesystem images you want to download from the
                        <filename>YOCTOADT_IPKG_REPO</filename> repository.</para></listitem>
                    <listitem><para><filename>YOCTOADT_TARGET_SYSROOT_IMAGE_&lt;arch&gt;</filename>: The
                        particular root filesystem used to extract and create the target sysroot.
                        The value of this variable must have been specified with
                        <filename>YOCTOADT_ROOTFS_&lt;arch&gt;</filename>.
                        For example, if you downloaded both <filename>minimal</filename> and
                        <filename>sato-sdk</filename> images by setting
                        <filename>YOCTOADT_ROOTFS_&lt;arch&gt;</filename>
                        to "minimal sato-sdk", then <filename>YOCTOADT_ROOTFS_&lt;arch&gt;</filename>
                        must be set to either <filename>minimal</filename> or
                        <filename>sato-sdk</filename>.</para></listitem>
                    <listitem><para><filename>YOCTOADT_TARGET_SYSROOT_LOC_&lt;arch&gt;</filename>: The
                        location on the development host where the target sysroot is created.
                        </para></listitem>
                </itemizedlist>
            </para>

            <para>
                After you have configured the <filename>adt_installer.conf</filename> file,
                run the installer using the following command.
                Be sure that you are not trying to use cross-compilation tools.
                When you run the installer, the environment must use a
                host <filename>gcc</filename>:
                <literallayout class='monospaced'>
     $ cd ~/adt-installer
     $ ./adt_installer
                </literallayout>
                Once the installer begins to run, you are asked to enter the
                location for cross-toolchain installation.
                The default location is
                <filename>/opt/poky/&lt;release&gt;</filename>.
                After either accepting the default location or selecting your
                own location, you are prompted to run the installation script
                interactively or in silent mode.
                If you want to closely monitor the installation,
                choose “I” for interactive mode rather than “S” for silent mode.
                Follow the prompts from the script to complete the installation.
            </para>

            <para>
                Once the installation completes, the ADT, which includes the
                cross-toolchain, is installed in the selected installation
                directory.
                You will notice environment setup files for the cross-toolchain
                in the installation directory, and image tarballs in the
                <filename>adt-installer</filename> directory according to your
                installer configurations, and the target sysroot located
                according to the
                <filename>YOCTOADT_TARGET_SYSROOT_LOC_&lt;arch&gt;</filename>
                variable also in your configuration file.
            </para>
         </section>
    </section>

    <section id='using-an-existing-toolchain-tarball'>
        <title>Using a Cross-Toolchain Tarball</title>

        <para>
            If you want to simply install a cross-toolchain by hand, you can
            do so by running the toolchain installer.
            The installer includes the pre-built cross-toolchain, the
            <filename>runqemu</filename> script, and support files.
            If you use this method to install the cross-toolchain, you
            might still need to install the target sysroot by installing and
            extracting it separately.
            For information on how to install the sysroot, see the
            "<link linkend='extracting-the-root-filesystem'>Extracting the Root Filesystem</link>" section.
        </para>

        <para>
            Follow these steps:
            <orderedlist>
                <listitem><para>Get your toolchain installer using one of the
                    following methods:
                    <itemizedlist>
                        <listitem><para>Go to
                            <ulink url='&YOCTO_TOOLCHAIN_DL_URL;'></ulink>
                            and find the folder that matches your host
                            development system (i.e. <filename>i686</filename>
                            for 32-bit machines or <filename>x86_64</filename>
                            for 64-bit machines).</para>
                            <para>Go into that folder and download the toolchain
                            installer whose name includes the appropriate target
                            architecture.
                            The toolchains provided by the Yocto Project
                            are based off of the
                            <filename>core-image-sato</filename> image and
                            contain libraries appropriate for developing
                            against that image.
                            For example, if your host development system is a
                            64-bit x86 system and you are going to use
                            your cross-toolchain for a 32-bit x86
                            target, go into the <filename>x86_64</filename>
                            folder and download the following installer:
                            <literallayout class='monospaced'>
     poky-eglibc-x86_64-core-image-sato-i586-toolchain-&DISTRO;.sh
                            </literallayout></para></listitem>
                        <listitem><para>Build your own toolchain installer.
                            For cases where you cannot use an installer
                            from the download area, you can build your own as
                            described in the
                            "<link linkend='optionally-building-a-toolchain-installer'>Optionally Building a Toolchain Installer</link>"
                            section.</para></listitem>
                    </itemizedlist></para></listitem>
                <listitem><para>Once you have the installer, run it to install
                    the toolchain.
                    <note>
                        You must change the permissions on the toolchain
                        installer script so that it is executable.
                    </note></para>
                    <para>The following command shows how to run the installer
                    given a toolchain tarball for a 64-bit x86 development host
                    system and a 32-bit x86 target architecture.
                    The example assumes the toolchain installer is located
                    in <filename>~/Downloads/</filename>.
                    <literallayout class='monospaced'>
     $ ~/Downloads/poky-eglibc-x86_64-core-image-sato-i586-toolchain-&DISTRO;.sh
                    </literallayout>
                    The first thing the installer prompts you for is the
                    directory into which you want to install the toolchain.
                    The default directory used is
                    <filename>opt/poky/&DISTRO;</filename>.
                    If you do not have write permissions for the directory
                    into which you are installing the toolchain, the
                    toolchain installer notifies you and exits.
                    Be sure you have write permissions in the directory and
                    run the installer again.</para>
                    <para>When the script finishes, the cross-toolchain is
                    installed.
                    You will notice environment setup files for the
                    cross-toolchain in the installation directory.
                    </para></listitem>
            </orderedlist>
        </para>
    </section>

    <section id='using-the-toolchain-from-within-the-build-tree'>
        <title>Using BitBake and the Build Directory</title>

        <para>
            A final way of making the cross-toolchain available is to use BitBake
            to generate the toolchain within an existing
            <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
            This method does not install the toolchain into the default
            <filename>/opt</filename> directory.
            As with the previous method, if you need to install the target sysroot, you must
            do that separately as well.
        </para>

        <para>
            Follow these steps to generate the toolchain into the Build Directory:
            <orderedlist>
                <listitem><para>Source the environment setup script
                    <filename>&OE_INIT_FILE;</filename> located in the
                    <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>.
                    </para></listitem>
                <listitem><para>At this point, you should be sure that the
                    <ulink url='&YOCTO_DOCS_REF_URL;#var-MACHINE'><filename>MACHINE</filename></ulink> variable
                    in the <filename>local.conf</filename> file found in the
                    <filename>conf</filename> directory of the Build Directory
                    is set for the target architecture.
                    Comments within the <filename>local.conf</filename> file list the values you
                    can use for the <filename>MACHINE</filename> variable.
                    <note>You can populate the Build Directory with the cross-toolchains for more
                        than a single architecture.
                        You just need to edit the <filename>MACHINE</filename> variable in the
                        <filename>local.conf</filename> file and re-run the BitBake
                        command.</note></para></listitem>
                <listitem><para>Run <filename>bitbake meta-ide-support</filename> to complete the
                    cross-toolchain generation.
                    <note>If you change out of your working directory after you
                        <filename>source</filename> the environment setup script and before you run
                        the BitBake command, the command might not work.
                        Be sure to run the BitBake command immediately
                        after checking or editing the <filename>local.conf</filename> but without
                        changing out of your working directory.</note>
                    Once the BitBake command finishes,
                    the cross-toolchain is generated and populated within the Build Directory.
                    You will notice environment setup files for the cross-toolchain in the
                    Build Directory in the <filename>tmp</filename> directory.
                    Setup script filenames contain the strings <filename>environment-setup</filename>.</para>
                    <para>Be aware that when you use this method to install the toolchain you still need
                    to separately extract and install the sysroot filesystem.
                    For information on how to do this, see the
                    "<link linkend='extracting-the-root-filesystem'>Extracting the Root Filesystem</link>" section.
                    </para></listitem>
            </orderedlist>
        </para>
    </section>
</section>

<section id='setting-up-the-cross-development-environment'>
    <title>Setting Up the Cross-Development Environment</title>

    <para>
        Before you can develop using the cross-toolchain, you need to set up the
        cross-development environment by sourcing the toolchain's environment setup script.
        If you used the ADT Installer or hand-installed cross-toolchain,
        then you can find this script in the directory you chose for installation.
        The default installation directory is the <filename>&YOCTO_ADTPATH_DIR;</filename>
        directory.
        If you installed the toolchain in the
        <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>,
        you can find the environment setup
        script for the toolchain in the Build Directory's <filename>tmp</filename> directory.
    </para>

    <para>
        Be sure to run the environment setup script that matches the
        architecture for which you are developing.
        Environment setup scripts begin with the string
        "<filename>environment-setup</filename>" and include as part of their
        name the architecture.
        For example, the toolchain environment setup script for a 64-bit
        IA-based architecture installed in the default installation directory
        would be the following:
        <literallayout class='monospaced'>
     &YOCTO_ADTPATH_DIR;/environment-setup-x86_64-poky-linux
        </literallayout>
    </para>
</section>

<section id='securing-kernel-and-filesystem-images'>
    <title>Securing Kernel and Filesystem Images</title>

    <para>
        You will need to have a kernel and filesystem image to boot using your
        hardware or the QEMU emulator.
        Furthermore, if you plan on booting your image using NFS or you want to use the root filesystem
        as the target sysroot, you need to extract the root filesystem.
    </para>

    <section id='getting-the-images'>
        <title>Getting the Images</title>

        <para>
            To get the kernel and filesystem images, you either have to build them or download
            pre-built versions.
            You can find examples for both these situations in the
            "<ulink url='&YOCTO_DOCS_QS_URL;#test-run'>A Quick Test Run</ulink>" section of
            the Yocto Project Quick Start.
        </para>

        <para>
            The Yocto Project ships basic kernel and filesystem images for several
            architectures (<filename>x86</filename>, <filename>x86-64</filename>,
            <filename>mips</filename>, <filename>powerpc</filename>, and <filename>arm</filename>)
            that you can use unaltered in the QEMU emulator.
            These kernel images reside in the release
            area - <ulink url='&YOCTO_MACHINES_DL_URL;'></ulink>
            and are ideal for experimentation using Yocto Project.
            For information on the image types you can build using the OpenEmbedded build system,
            see the
            "<ulink url='&YOCTO_DOCS_REF_URL;#ref-images'>Images</ulink>" chapter in
            the Yocto Project Reference Manual.
        </para>

        <para>
            If you are planning on developing against your image and you are not
            building or using one of the Yocto Project development images
            (e.g. <filename>core-image-*-dev</filename>), you must be sure to
            include the development packages as part of your image recipe.
        </para>

        <para>
            Furthermore, if you plan on remotely deploying and debugging your
            application from within the
            Eclipse IDE, you must have an image that contains the Yocto Target Communication
            Framework (TCF) agent (<filename>tcf-agent</filename>).
            By default, the Yocto Project provides only one type pre-built image that contains the
            <filename>tcf-agent</filename>.
            And, those images are SDK (e.g.<filename>core-image-sato-sdk</filename>).
        </para>

        <para>
            If you want to use a different image type that contains the <filename>tcf-agent</filename>,
            you can do so one of two ways:
            <itemizedlist>
                <listitem><para>Modify the <filename>conf/local.conf</filename> configuration in
                    the <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>
                    and then rebuild the image.
                    With this method, you need to modify the
                    <ulink url='&YOCTO_DOCS_REF_URL;#var-EXTRA_IMAGE_FEATURES'><filename>EXTRA_IMAGE_FEATURES</filename></ulink>
                    variable to have the value of "tools-debug" before rebuilding the image.
                    Once the image is rebuilt, the <filename>tcf-agent</filename> will be included
                    in the image and is launched automatically after the boot.</para></listitem>
                <listitem><para>Manually build the <filename>tcf-agent</filename>.
                    To build the agent, follow these steps:
                    <orderedlist>
                        <listitem><para>Be sure the ADT is installed as described in the
                            "<link linkend='installing-the-adt'>Installing the ADT and Toolchains</link>" section.
                            </para></listitem>
                        <listitem><para>Set up the cross-development environment as described in the
                            "<link linkend='setting-up-the-cross-development-environment'>Setting
                            Up the Cross-Development Environment</link>" section.</para></listitem>
                        <listitem><para>Get the <filename>tcf-agent</filename> source code using
                            the following commands:
                            <literallayout class='monospaced'>
     $ git clone http://git.eclipse.org/gitroot/tcf/org.eclipse.tcf.agent.git
     $ cd agent
                            </literallayout></para></listitem>
                        <listitem><para>Modify the <filename>Makefile.inc</filename> file
                            for the cross-compilation environment by setting the
                            <filename>OPSYS</filename> and
                            <ulink url='&YOCTO_DOCS_REF_URL;#var-MACHINE'><filename>MACHINE</filename></ulink>
                            variables according to your target.</para></listitem>
                        <listitem><para>Use the cross-development tools to build the
                            <filename>tcf-agent</filename>.
                            Before you "Make" the file, be sure your cross-tools are set up first.
                            See the "<link linkend='makefile-based-projects'>Makefile-Based Projects</link>"
                            section for information on how to make sure the cross-tools are set up
                            correctly.</para>
                            <para>If the build is successful, the <filename>tcf-agent</filename> output will
                            be <filename>obj/$(OPSYS)/$(MACHINE)/Debug/agent</filename>.</para></listitem>
                        <listitem><para>Deploy the agent into the image's root filesystem.</para></listitem>
                    </orderedlist>
                </para></listitem>
            </itemizedlist>
        </para>
    </section>

    <section id='extracting-the-root-filesystem'>
        <title>Extracting the Root Filesystem</title>

        <para>
            You must extract the root filesystem if you want to boot the image using NFS
            or you want to use the root filesystem as the target sysroot.
            For example, the Eclipse IDE environment with the Eclipse Yocto Plug-in installed allows you
            to use QEMU to boot under NFS.
            Another example is if you want to develop your target application using the
            root filesystem as the target sysroot.
        </para>

        <para>
            To extract the root filesystem, first <filename>source</filename>
            the cross-development environment setup script and then
            use the <filename>runqemu-extract-sdk</filename> command on the
            filesystem image.
            For example, the following commands set up the environment and then extract
            the root filesystem from a previously built filesystem image tarball named
            <filename>core-image-sato-sdk-qemux86-2011091411831.rootfs.tar.bz2</filename>.
            The example extracts the root filesystem into the <filename>$HOME/qemux86-sato</filename>
            directory:
            <literallayout class='monospaced'>
     $ source $HOME/toolchain_dir/environment-setup-i586-poky-linux
     $ runqemu-extract-sdk \
        ~Downloads/core-image-sato-sdk-qemux86-2011091411831.rootfs.tar.bz2 \
        $HOME/qemux86-sato
            </literallayout>
            In this case, you could now point to the target sysroot at
            <filename>$HOME/qemux86-sato</filename>.
        </para>
    </section>
</section>

<section id='optionally-building-a-toolchain-installer'>
    <title>Optionally Building a Toolchain Installer</title>

    <para>
        As an alternative to locating and downloading a toolchain installer,
        you can build the toolchain installer if you have a
        <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>.
    </para>

    <para>
        You can build the toolchain
        installer using <filename>bitbake meta-toolchain</filename>.
        This method requires you to still install the target
        sysroot by installing and extracting it separately.
        For information on how to install the sysroot, see the
        "<link linkend='extracting-the-root-filesystem'>Extracting the Root Filesystem</link>" section.
    </para>

    <para>
        A final method of building the toolchain installer exists that has
        significant advantages over the previous method.
        This method results in a toolchain installer that contains the sysroot
        that matches your target root filesystem.
        To build this installer, use the
        <filename>bitbake image -c populate_sdk</filename> command.
    </para>

    <para>
         Remember, before using any <filename>bitbake</filename> command, you
         must source the build environment setup script
         (i.e.
         <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink>
         or
         <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink>)
         located in the Source Directory and you must make sure your
         <filename>conf/local.conf</filename> variables are correct.
         In particular, you need to be sure the
         <ulink url='&YOCTO_DOCS_REF_URL;#var-MACHINE'><filename>MACHINE</filename></ulink>
         variable matches the architecture for which you are building and that
         the
         <ulink url='&YOCTO_DOCS_REF_URL;#var-SDKMACHINE'><filename>SDKMACHINE</filename></ulink>
         variable is correctly set if you are building a toolchain designed to
         run on an architecture that differs from your current development host
         machine (i.e. the build machine).
     </para>

     <para>
         When the BitBake command completes, the toolchain installer will be in
         <filename>tmp/deploy/sdk</filename> in the Build Directory.
     </para>
</section>

</chapter>
<!--
vim: expandtab tw=80 ts=4
-->