Add support for new GTA02 version of Neo1973 Index: u-boot/Makefile =================================================================== --- u-boot.orig/Makefile +++ u-boot/Makefile @@ -2038,6 +2038,10 @@ sbc2410x_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 +gta02_config \ +gta02v1_config : unconfig + @sh board/neo1973/gta02/split_by_variant.sh $@ + gta01_config \ gta01v3_config \ gta01bv2_config \ Index: u-boot/board/neo1973/gta02/Makefile =================================================================== --- /dev/null +++ u-boot/board/neo1973/gta02/Makefile @@ -0,0 +1,64 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := gta02.o pcf50633.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o ../common/bootmenu.o +SOBJS := ../common/lowlevel_init.o + +.PHONY: all + +all: $(LIB) lowevel_foo.bin + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +lowlevel_foo.o: ../common/lowlevel_foo.S + $(CC) -c -DTEXT_BASE=0x33F80000 -march=armv4 \ + -o lowlevel_foo.o ../common/lowlevel_foo.S + +lowlevel_foo: lowlevel_foo.o ../common/lowlevel_init.o ../common/lowlevel_foo.lds + $(LD) -T ../common/lowlevel_foo.lds -Ttext 0x33f80000 -Bstatic \ + ../common/lowlevel_init.o lowlevel_foo.o -o lowlevel_foo + +lowevel_foo.bin: lowlevel_foo + $(CROSS_COMPILE)objcopy --gap-fill=0xff -O binary \ + lowlevel_foo lowlevel_foo.bin + + +clean: + rm -f $(SOBJS) $(OBJS) lowlevel_foo lowlevel_foo.o + +distclean: clean + rm -f $(LIB) core *.bak .depend lowlevel_foo.bin + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### Index: u-boot/board/neo1973/gta02/gta02.c =================================================================== --- /dev/null +++ u-boot/board/neo1973/gta02/gta02.c @@ -0,0 +1,313 @@ +/* + * (C) 2006-2007 by OpenMoko, Inc. + * Author: Harald Welte + * + * based on existing S3C2410 startup code in u-boot: + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * (C) Copyright 2002 + * David Mueller, ELSOFT AG, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include "../common/neo1973.h" +#include "../common/jbt6k74.h" + +#include "pcf50633.h" + +DECLARE_GLOBAL_DATA_PTR; + +/* That many seconds the power key needs to be pressed to power up */ +#define POWER_KEY_SECONDS 2 + +#define M_MDIV 0x7f /* Fout = 405.00MHz */ +#define M_PDIV 0x2 +#define M_SDIV 0x1 + +#define U_M_MDIV 0x38 +#define U_M_PDIV 0x2 +#define U_M_SDIV 0x2 + +unsigned int neo1973_wakeup_cause; +extern int nobootdelay; + +static inline void delay (unsigned long loops) +{ + __asm__ volatile ("1:\n" + "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0" (loops)); +} + +/* + * Miscellaneous platform dependent initialisations + */ + +int board_init (void) +{ + S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + + /* to reduce PLL lock time, adjust the LOCKTIME register */ + clk_power->LOCKTIME = 0xFFFFFF; + + /* configure MPLL */ + clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); + + /* some delay between MPLL and UPLL */ + delay (4000); + + /* configure UPLL */ + clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); + + /* some delay between MPLL and UPLL */ + delay (8000); + + /* set up the I/O ports */ +#if defined(CONFIG_ARCH_GTA02_v1) + gpio->GPACON = 0x007E1FFF; + gpio->GPADAT |= (1 << 16); /* Set GPA16 to high (nNAND_WP) */ + + gpio->GPBCON = 0x00155555; + gpio->GPBUP = 0x000007FF; + + gpio->GPCCON = 0x55551155; + gpio->GPCUP = 0x0000FFFF; + + gpio->GPDCON = 0x55555555; + gpio->GPDUP = 0x0000FFFF; + + gpio->GPECON = 0xAAAAAAAA; + gpio->GPEUP = 0x0000FFFF; + + gpio->GPFCON = 0x0000AAAA; + gpio->GPFUP = 0x000000FF; + + gpio->GPGCON = 0x013DFDFA; + gpio->GPGUP = 0x0000FFFF; + + gpio->GPHCON = 0x0028AAAA; + gpio->GPHUP = 0x000007FF; + + gpio->GPJCON = 0x1545541; +#else +#error Please define GTA02 version +#endif + + /* arch number of SMDK2410-Board */ + gd->bd->bi_arch_number = MACH_TYPE_NEO1973_GTA02; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0x30000100; + + icache_enable(); + dcache_enable(); + + return 0; +} + +int board_late_init(void) +{ + extern unsigned char booted_from_nand; + unsigned char tmp; + char buf[32]; + int menu_vote = 0; /* <= 0: no, > 0: yes */ + int seconds = 0; + + /* Initialize the Power Management Unit with a safe register set */ + pcf50633_init(); +#if 0 + /* if there's no other reason, must be regular reset */ + neo1973_wakeup_cause = NEO1973_WAKEUP_RESET; + + if (!booted_from_nand) + goto woken_by_reset; + + /* obtain wake-up reason, save INT1 in environment */ + tmp = pcf50606_reg_read(PCF50606_REG_INT1); + sprintf(buf, "0x%02x", tmp); + setenv("pcf50606_int1", buf); + + if (tmp & PCF50606_INT1_ALARM) { + /* we've been woken up by RTC alarm, boot */ + neo1973_wakeup_cause = NEO1973_WAKEUP_ALARM; + goto continue_boot; + } + if (tmp & PCF50606_INT1_EXTONR) { + /* we've been woken up by charger insert */ + neo1973_wakeup_cause = NEO1973_WAKEUP_CHARGER; + } + + if (tmp & PCF50606_INT1_ONKEYF) { + /* we've been woken up by a falling edge of the onkey */ + neo1973_wakeup_cause = NEO1973_WAKEUP_POWER_KEY; + } + + if (neo1973_wakeup_cause == NEO1973_WAKEUP_CHARGER) { + /* if we still think it was only a charger insert, boot */ + goto continue_boot; + } + +woken_by_reset: + + while (neo1973_wakeup_cause == NEO1973_WAKEUP_RESET || + neo1973_on_key_pressed()) { + if (neo1973_aux_key_pressed()) + menu_vote++; + else + menu_vote--; + + if (neo1973_new_second()) + seconds++; + if (seconds >= POWER_KEY_SECONDS) + goto continue_boot; + } + /* Power off if minimum number of seconds not reached */ + neo1973_poweroff(); + +continue_boot: + jbt6k74_init(); + jbt6k74_enter_state(JBT_STATE_NORMAL); + jbt6k74_display_onoff(1); +#endif + + /* issue a short pulse with the vibrator */ + neo1973_vibrator(1); + udelay(50000); + neo1973_vibrator(0); + + /* switch on the backlight */ + neo1973_backlight(1); + +#if 0 + { + /* check if sd card is inserted, and power-up if it is */ + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + if (!(gpio->GPFDAT & (1 << 5))) + gpio->GPBDAT &= ~(1 << 2); + } + + if (menu_vote > 0) { + bootmenu(); + nobootdelay = 1; + } +#endif + + return 0; +} + +int dram_init (void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return 0; +} + +u_int32_t get_board_rev(void) +{ +#if defined(CONFIG_ARCH_GTA02_v1) + return 0x00000310; +#endif +} + +void neo1973_poweroff(void) +{ + printf("poweroff\n"); + udc_disconnect(); + pcf50633_reg_write(PCF50633_REG_OOCSHDWN, 0x01); + /* don't return to caller */ + while (1) ; +} + +void neo1973_backlight(int on) +{ + /* FIXME: PMU based implementation */ +} + +/* FIXME: shared */ +void neo1973_vibrator(int on) +{ + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + if (on) +#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) + gpio->GPGDAT |= (1 << 11); /* GPG11 */ +#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) + gpio->GPBDAT |= (1 << 10); /* GPB10 */ +#elif defined(CONFIG_ARCH_GTA01B_v4) || defined(CONFIG_ARCH_GTA02_v1) + gpio->GPBDAT |= (1 << 3); /* GPB3 */ +#endif + else +#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) + gpio->GPGDAT &= ~(1 << 11); /* GPG11 */ +#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) + gpio->GPBDAT &= ~(1 << 10); /* GPB10 */ +#elif defined(CONFIG_ARCH_GTA01B_v4) || defined(CONFIG_ARCH_GTA02_v1) + gpio->GPBDAT &= ~(1 << 3); /* GPB3 */ +#endif +} + +int neo1973_new_second(void) +{ + return pcf50633_reg_read(PCF50633_REG_INT1) & PCF50633_INT1_SECOND; +} + +int neo1973_on_key_pressed(void) +{ + return !(pcf50633_reg_read(PCF50633_REG_OOCSTAT) + & PCF50633_OOCSTAT_ONKEY); +} + +/* FIXME: shared */ +int neo1973_aux_key_pressed(void) +{ + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + if (gpio->GPFDAT & (1 << 6)) + return 0; + return 1; +} + +/* The sum of all part_size[]s must equal to the NAND size, i.e., 0x4000000. + "initrd" is sized such that it can hold two uncompressed 16 bit 640*480 + images: 640*480*2*2 = 1228800 < 1245184. */ + +unsigned int dynpart_size[] = { + CFG_UBOOT_SIZE, CFG_ENV_SIZE, 0x200000, 0xa0000, 0x1fce0000, 0 }; +char *dynpart_names[] = { + "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL }; + + +const char *neo1973_get_charge_status(void) +{ + /* FIXME */ + return "unknown"; +} + +int neo1973_set_charge_mode(enum neo1973_charger_cmd cmd) +{ + /* FIXME */ + return 0; +} Index: u-boot/board/neo1973/gta02/u-boot.lds =================================================================== --- /dev/null +++ u-boot/board/neo1973/gta02/u-boot.lds @@ -0,0 +1,58 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm920t/start.o (.text) + cpu/arm920t/s3c24x0/nand_read.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} Index: u-boot/include/configs/neo1973_gta02.h =================================================================== --- /dev/null +++ u-boot/include/configs/neo1973_gta02.h @@ -0,0 +1,276 @@ +/* + * (C) Copyright 2007 OpenMoko, Inc. + * Author: Harald Welte + * + * Configuation settings for the FIC Neo1973 GTA02 Linux GSM phone + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* we want to be able to start u-boot directly from within NAND flash */ +#define CONFIG_LL_INIT_NAND_ONLY +#define CONFIG_S3C2410_NAND_BOOT 1 +#define CONFIG_S3C2410_NAND_SKIP_BAD 1 + +#define CFG_UBOOT_SIZE 0x40000 /* size of u-boot, for NAND loading */ + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ +#define CONFIG_S3C2440 1 /* in a SAMSUNG S3C2410 SoC */ +#define CONFIG_SMDK2440 1 /* on a SAMSUNG SMDK2410 Board */ + +/* input clock of PLL */ +#define CONFIG_SYS_CLK_FREQ 12000000/* the GTA02 has this input clock */ + + +#define USE_920T_MMU 1 +#define CONFIG_USE_IRQ 1 + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 400*1024) + /* >> CFG_VIDEO_LOGO_MAX_SIZE */ +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL3 1 /* we use SERIAL 1 on GTA01 */ + +/************************************************************ + * RTC + ************************************************************/ +#define CONFIG_RTC_S3C24X0 1 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +/*********************************************************** + * Command definition + ***********************************************************/ +#define CONFIG_COMMANDS (\ + CFG_CMD_BDI | \ + CFG_CMD_LOADS | \ + CFG_CMD_LAODB | \ + CFG_CMD_IMI | \ + CFG_CMD_CACHE | \ + CFG_CMD_MEMORY | \ + CFG_CMD_ENV | \ + /* CFG_CMD_IRQ | */ \ + CFG_CMD_BOOTD | \ + CFG_CMD_CONSOLE | \ + /* CFG_CMD_BMP | */ \ + CFG_CMD_ASKENV | \ + CFG_CMD_RUN | \ + CFG_CMD_ECHO | \ + CFG_CMD_I2C | \ + CFG_CMD_REGINFO | \ + CFG_CMD_IMMAP | \ + CFG_CMD_DATE | \ + CFG_CMD_AUTOSCRIPT | \ + CFG_CMD_BSP | \ + CFG_CMD_ELF | \ + CFG_CMD_MISC | \ + /* CFG_CMD_USB | */ \ + CFG_CMD_JFFS2 | \ + CFG_CMD_DIAG | \ + /* CFG_CMD_HWFLOW | */ \ + CFG_CMD_SAVES | \ + CFG_CMD_NAND | \ + CFG_CMD_PORTIO | \ + CFG_CMD_MMC | \ + CFG_CMD_FAT | \ + CFG_CMD_EXT2 | \ + 0) +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "" +#define CONFIG_BOOTCOMMAND "setenv bootargs ${bootargs_base} ${mtdparts}; nand read.e 0x32000000 kernel; bootm 0x32000000" + +#define CONFIG_DOS_PARTITION 1 + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +/* what's this ? it's not used anywhere */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#if defined(CONFIG_ARCH_GTA02_v1) +#define CFG_PROMPT "GTA02v1 # " /* Monitor Command Prompt */ +#endif +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 64 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ +#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0x33000000 /* default load address */ + +/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ +/* it to wrap 100 times (total 1562500) to get 1 sec. */ +#define CFG_HZ 1562500 + +/* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CFG_BOOTMENU + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (8*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +#if 0 +#define CONFIG_USB_OHCI 1 +#endif + +#define CONFIG_USB_DEVICE 1 +#define CONFIG_USB_TTY 1 +#define CFG_CONSOLE_IS_IN_ENV 1 +#define CONFIG_USBD_VENDORID 0x1457 /* Linux/NetChip */ +#define CONFIG_USBD_PRODUCTID_GSERIAL 0x5120 /* gserial */ +#define CONFIG_USBD_PRODUCTID_CDCACM 0x5119 /* CDC ACM */ +#define CONFIG_USBD_MANUFACTURER "OpenMoko, Inc" +#define CONFIG_USBD_PRODUCT_NAME "Neo1973 Bootloader " U_BOOT_VERSION +#define CONFIG_USBD_DFU 1 +#define CONFIG_USBD_DFU_XFER_SIZE 4096 /* 0x4000 */ +#define CONFIG_USBD_DFU_INTERFACE 2 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "usbtty=cdc_acm\0" \ + "bootargs_base=rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8\0" \ + "" + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ +#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */ + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* No NOR flash in this device */ +#define CFG_NO_FLASH 1 + +#define CFG_ENV_IS_IN_NAND 1 +#define CFG_ENV_SIZE 0x40000 /* 128k Total Size of Environment Sector */ +#define CFG_ENV_OFFSET_OOB 1 /* Location of ENV stored in block 0 OOB */ +#define CFG_PREBOOT_OVERRIDE 1 /* allow preboot from memory */ + +#define NAND_MAX_CHIPS 1 +#define CFG_NAND_BASE 0x4e000000 +#define CFG_MAX_NAND_DEVICE 1 + +#define CONFIG_MMC 1 +#define CFG_MMC_BASE 0xff000000 + +/* EXT2 driver */ +#define CONFIG_EXT2 1 + +#define CONFIG_FAT 1 +#define CONFIG_SUPPORT_VFAT + +#if 1 +/* JFFS2 driver */ +#define CONFIG_JFFS2_CMDLINE 1 +#define CONFIG_JFFS2_NAND 1 +#define CONFIG_JFFS2_NAND_DEV 0 +//#define CONFIG_JFFS2_NAND_OFF 0x634000 +//#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 +#endif + +/* ATAG configuration */ +#define CONFIG_INITRD_TAG 1 +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_CMDLINE_TAG 1 +#define CONFIG_REVISION_TAG 1 +#if 0 +#define CONFIG_SERIAL_TAG 1 +#endif + +#define CONFIG_DRIVER_S3C24X0_I2C 1 +#define CONFIG_HARD_I2C 1 +#define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50633 data sheet */ +#define CFG_I2C_SLAVE 0x7f + +/* we have a board_late_init() function */ +#define BOARD_LATE_INIT 1 + +#if 0 +#define CONFIG_VIDEO +#define CONFIG_VIDEO_S3C2410 +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_LOGO +#define CONFIG_SPLASH_SCREEN +#define CFG_VIDEO_LOGO_MAX_SIZE (640*480+1024+100) /* 100 = slack */ +#define CONFIG_VIDEO_BMP_GZIP +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_UNZIP + +#define VIDEO_KBD_INIT_FCT 0 +#define VIDEO_TSTC_FCT serial_tstc +#define VIDEO_GETC_FCT serial_getc + +#define LCD_VIDEO_ADDR 0x33d00000 +#endif + +#define CONFIG_S3C2410_NAND_BBT 1 +//#define CONFIG_S3C2410_NAND_HWECC 1 + +#define CONFIG_DRIVER_PCF50633 1 + +#define MTDIDS_DEFAULT "nand0=neo1973-nand" +#define MTPARTS_DEFAULT "neo1973-nand:256k(u-boot),128k(u-boot_env),2M(kernel),640k(splash),-(jffs2)" +#define CFG_NAND_DYNPART_MTD_KERNEL_NAME "neo1973-nand" +#define CONFIG_NAND_DYNPART + +#endif /* __CONFIG_H */ Index: u-boot/board/neo1973/gta02/split_by_variant.sh =================================================================== --- /dev/null +++ u-boot/board/neo1973/gta02/split_by_variant.sh @@ -0,0 +1,37 @@ +#!/bin/sh +# --------------------------------------------------------- +# Set the core module defines according to Core Module +# --------------------------------------------------------- +# --------------------------------------------------------- +# Set up the GTA01 type define +# --------------------------------------------------------- + +CFGINC=${obj}include/config.h +CFGTMP=${obj}board/neo1973/gta02/config.tmp + +mkdir -p ${obj}include +if [ "$1" == "" ] +then + echo "$0:: No parameters - using GTA02Bv1 config" + echo "#define CONFIG_ARCH_GTA02_v1" > $CFGINC + echo "CONFIG_USB_DFU_REVISION=0x0310" > $CFGTMP +else + case "$1" in + gta02v1_config) + echo "#define CONFIG_ARCH_GTA02_v1" > $CFGINC + echo "CONFIG_USB_DFU_REVISION=0x0310" > $CFGTMP + ;; + + *) + echo "$0:: Unrecognised config - using GTA02v1 config" + echo "#define CONFIG_ARCH_GTA02_v1" > $CFGINC + echo "CONFIG_USB_DFU_REVISION=0x0310" > $CFGTMP + ;; + + esac + +fi +# --------------------------------------------------------- +# Complete the configuration +# --------------------------------------------------------- +$MKCONFIG -a neo1973_gta02 arm arm920t gta02 neo1973 s3c24x0 Index: u-boot/include/pcf50633.h =================================================================== --- /dev/null +++ u-boot/include/pcf50633.h @@ -0,0 +1,235 @@ +#ifndef _PCF50633_H +#define _PCF50633_H + +/* Philips PCF50633 Power Managemnt Unit (PMU) driver + * (C) 2006-2007 by OpenMoko, Inc. + * Author: Harald Welte + * + */ + +enum pfc50633_regs { + PCF50633_REG_VERSION = 0x00, + PCF50633_REG_VARIANT = 0x01, + PCF50633_REG_INT1 = 0x02, /* Interrupt Status */ + PCF50633_REG_INT2 = 0x03, /* Interrupt Status */ + PCF50633_REG_INT3 = 0x04, /* Interrupt Status */ + PCF50633_REG_INT4 = 0x05, /* Interrupt Status */ + PCF50633_REG_INT5 = 0x06, /* Interrupt Status */ + PCF50633_REG_INT1M = 0x07, /* Interrupt Mask */ + PCF50633_REG_INT2M = 0x08, /* Interrupt Mask */ + PCF50633_REG_INT3M = 0x09, /* Interrupt Mask */ + PCF50633_REG_INT4M = 0x0a, /* Interrupt Mask */ + PCF50633_REG_INT5M = 0x0b, /* Interrupt Mask */ + PCF50633_REG_OOCSHDWN = 0x0c, + PCF50633_REG_OOCWAKE = 0x0d, + PCF50633_REG_OOCTIM1 = 0x0e, + PCF50633_REG_OOCTIM2 = 0x0f, + PCF50633_REG_OOCMODE = 0x10, + PCF50633_REG_OOCCTL = 0x11, + PCF50633_REG_OOCSTAT = 0x12, + PCF50633_REG_GPIOCTL = 0x13, + PCF50633_REG_GPIO1CFG = 0x14, + PCF50633_REG_GPIO2CFG = 0x15, + PCF50633_REG_GPIO3CFG = 0x16, + PCF50633_REG_GPOCFG = 0x17, + PCF50633_REG_BVMCTL = 0x18, + PCF50633_REG_SVMCTL = 0x19, + PCF50633_REG_AUTOOUT = 0x1a, + PCF50633_REG_AUTOENA = 0x1b, + PCF50633_REG_AUTOCTL = 0x1c, + PCF50633_REG_AUTOMXC = 0x1d, + PCF50633_REG_DOWN1OUT = 0x1e, + PCF50633_REG_DOWN1ENA = 0x1f, + PCF50633_REG_DOWN1CTL = 0x20, + PCF50633_REG_DOWN1MXC = 0x21, + PCF50633_REG_DOWN2OUT = 0x22, + PCF50633_REG_DOWN2ENA = 0x23, + PCF50633_REG_DOWN2CTL = 0x24, + PCF50633_REG_DOWN2MXC = 0x25, + PCF50633_REG_MEMLDOOUT = 0x26, + PCF50633_REG_MEMLDOENA = 0x27, + PCF50633_REG_LEDOUT = 0x28, + PCF50633_REG_LEDENA = 0x29, + PCF50633_REG_LEDCTL = 0x2a, + PCF50633_REG_LEDDIM = 0x2b, + /* reserved */ + PCF50633_REG_LDO1OUT = 0x2d, + PCF50633_REG_LDO1ENA = 0x2e, + PCF50633_REG_LDO2OUT = 0x2f, + PCF50633_REG_LDO2ENA = 0x30, + PCF50633_REG_LDO3OUT = 0x31, + PCF50633_REG_LDO3ENA = 0x32, + PCF50633_REG_LDO4OUT = 0x33, + PCF50633_REG_LDO4ENA = 0x34, + PCF50633_REG_LDO5OUT = 0x35, + PCF50633_REG_LDO5ENA = 0x36, + PCF50633_REG_LDO6OUT = 0x37, + PCF50633_REG_LDO6ENA = 0x38, + PCF50633_REG_HCLDOOUT = 0x39, + PCF50633_REG_HCLDOENA = 0x3a, + PCF50633_REG_STBYCTL1 = 0x3b, + PCF50633_REG_STBYCTL2 = 0x3c, + PCF50633_REG_DEBPF1 = 0x3d, + PCF50633_REG_DEBPF2 = 0x3e, + PCF50633_REG_DEBPF3 = 0x3f, + PCF50633_REG_HCLDOOVL = 0x40, + PCF50633_REG_DCDCSTAT = 0x41, + PCF50633_REG_LDOSTAT = 0x42, + PCF50633_REG_MBCC1 = 0x43, + PCF50633_REG_MBCC2 = 0x44, + PCF50633_REG_MBCC3 = 0x45, + PCF50633_REG_MBCC4 = 0x46, + PCF50633_REG_MBCC5 = 0x47, + PCF50633_REG_MBCC6 = 0x48, + PCF50633_REG_MBCC7 = 0x49, + PCF50633_REG_MBCC8 = 0x4a, + PCF50633_REG_MBCS1 = 0x4b, + PCF50633_REG_MBCS2 = 0x4c, + PCF50633_REG_MBCS3 = 0x4d, + PCF50633_REG_BBCCTL = 0x4e, + PCF50633_REG_ALMGAIN = 0x4f, + PCF50633_REG_ALMDATA = 0x50, + /* reserved */ + PCF50633_REG_ADCC3 = 0x52, + PCF50633_REG_ADCC2 = 0x53, + PCF50633_REG_ADCC1 = 0x54, + PCF50633_REG_ADCS1 = 0x55, + PCF50633_REG_ADCS2 = 0x56, + PCF50633_REG_ADCS3 = 0x57, + /* reserved */ + PCF50633_REG_RTCSC = 0x59, /* Second */ + PCF50633_REG_RTCMN = 0x5a, /* Minute */ + PCF50633_REG_RTCHR = 0x5b, /* Hour */ + PCF50633_REG_RTCWD = 0x5c, /* Weekday */ + PCF50633_REG_RTCDT = 0x5d, /* Day */ + PCF50633_REG_RTCMT = 0x5e, /* Month */ + PCF50633_REG_RTCYR = 0x5f, /* Year */ + PCF50633_REG_RTCSCA = 0x60, /* Alarm Second */ + PCF50633_REG_RTCMNA = 0x61, /* Alarm Minute */ + PCF50633_REG_RTCHRA = 0x62, /* Alarm Hour */ + PCF50633_REG_RTCWDA = 0x63, /* Alarm Weekday */ + PCF50633_REG_RTCDTA = 0x64, /* Alarm Day */ + PCF50633_REG_RTCMTA = 0x65, /* Alarm Month */ + PCF50633_REG_RTCYRA = 0x66, /* Alarm Year */ + + PCF50633_REG_MEMBYTE0 = 0x67, + PCF50633_REG_MEMBYTE1 = 0x68, + PCF50633_REG_MEMBYTE2 = 0x69, + PCF50633_REG_MEMBYTE3 = 0x6a, + PCF50633_REG_MEMBYTE4 = 0x6b, + PCF50633_REG_MEMBYTE5 = 0x6c, + PCF50633_REG_MEMBYTE6 = 0x6d, + PCF50633_REG_MEMBYTE7 = 0x6e, + /* reserved */ + PCF50633_REG_DCDCPFM = 0x84, + __NUM_PCF50633_REGS +}; + +enum pcf50633_reg_int1 { + PCF50633_INT1_ADPINS = 0x01, /* Adapter inserted */ + PCF50633_INT1_ADPREM = 0x02, /* Adapter removed */ + PCF50633_INT1_USBINS = 0x04, /* USB inserted */ + PCF50633_INT1_USBREM = 0x08, /* USB removed */ + /* reserved */ + PCF50633_INT1_ALARM = 0x40, /* RTC alarm time is reached */ + PCF50633_INT1_SECOND = 0x80, /* RTC periodic second interrupt */ +}; + +enum pcf50633_reg_int2 { + PCF50633_INT2_ONKEYR = 0x01, /* ONKEY rising edge */ + PCF50633_INT2_ONKEYF = 0x02, /* ONKEY falling edge */ + PCF50633_INT2_EXTON1R = 0x04, /* EXTON1 rising edge */ + PCF50633_INT2_EXTON1F = 0x08, /* EXTON1 falling edge */ + PCF50633_INT2_EXTON2R = 0x10, /* EXTON2 rising edge */ + PCF50633_INT2_EXTON2F = 0x20, /* EXTON2 falling edge */ + PCF50633_INT2_EXTON3R = 0x40, /* EXTON3 rising edge */ + PCF50633_INT2_EXTON3F = 0x80, /* EXTON3 falling edge */ +}; + +enum pcf50633_reg_int3 { + PCF50633_INT3_BATFULL = 0x01, /* Battery full */ + PCF50633_INT3_CHGHALT = 0x02, /* Charger halt */ + PCF50633_INT3_THLIMON = 0x04, + PCF50633_INT3_THLIMOFF = 0x08, + PCF50633_INT3_USBLIMON = 0x10, + PCF50633_INT3_USBLIMOFF = 0x20, + PCF50633_INT3_ADCRDY = 0x40, /* ADC conversion finished */ + PCF50633_INT3_ONKEY1S = 0x80, /* ONKEY pressed 1 second */ +}; + +enum pcf50633_reg_int4 { + PCF50633_INT4_LOWSYS = 0x01, + PCF50633_INT4_LOWBAT = 0x02, + PCF50633_INT4_HIGHTMP = 0x04, + PCF50633_INT4_AUTOPWRFAIL = 0x08, + PCF50633_INT4_DWN1PWRFAIL = 0x10, + PCF50633_INT4_DWN2PWRFAIL = 0x20, + PCF50633_INT4_LEDPWRFAIL = 0x40, + PCF50633_INT4_LEDOVP = 0x80, +}; + +enum pcf50633_reg_int5 { + PCF50633_INT4_LDO1PWRFAIL = 0x01, + PCF50633_INT4_LDO2PWRFAIL = 0x02, + PCF50633_INT4_LDO3PWRFAIL = 0x04, + PCF50633_INT4_LDO4PWRFAIL = 0x08, + PCF50633_INT4_LDO5PWRFAIL = 0x10, + PCF50633_INT4_LDO6PWRFAIL = 0x20, + PCF50633_INT4_HCLDOPWRFAIL = 0x40, + PCF50633_INT4_HCLDOOVL = 0x80, +}; + +enum pcf50633_reg_oocwake { + PCF50633_OOCWAKE_ONKEY = 0x01, + PCF50633_OOCWAKE_EXTON1 = 0x02, + PCF50633_OOCWAKE_EXTON2 = 0x04, + PCF50633_OOCWAKE_EXTON3 = 0x08, + PCF50633_OOCWAKE_RTC = 0x10, + /* reserved */ + PCF50633_OOCWAKE_USB = 0x40, + PCF50633_OOCWAKE_ADP = 0x80, +}; + +enum pcf50633_reg_mbcc1 { + PCF50633_MBCC1_CHGENA = 0x01, /* Charger enable */ + PCF50633_MBCC1_AUTOSTOP = 0x02, + PCF50633_MBCC1_AUTORES = 0x04, /* automatic resume */ + PCF50633_MBCC1_RESUME = 0x08, /* explicit resume cmd */ + PCF50633_MBCC1_RESTART = 0x10, /* restart charging */ + PCF50633_MBCC1_PREWDTIME_60M = 0x20, /* max. precharging time */ + PCF50633_MBCC1_WDTIME_1H = 0x00, + PCF50633_MBCC1_WDTIME_2H = 0x40, + PCF50633_MBCC1_WDTIME_4H = 0x80, + PCF50633_MBCC1_WDTIME_6H = 0xc0, +}; +#define PCF50633_MBCC1_WDTIME_MASK 0xc0 + +enum pcf50633_reg_mbcc2 { + PCF50633_MBCC2_VBATCOND_2V7 = 0x00, + PCF50633_MBCC2_VBATCOND_2V85 = 0x01, + PCF50633_MBCC2_VBATCOND_3V = 0x02, + PCF50633_MBCC2_VBATCOND_3V15 = 0x03, + PCF50633_MBCC2_VMAX_4V = 0x00, + PCF50633_MBCC2_VMAX_4V20 = 0x28, + PCF50633_MBCC2_VRESDEBTIME_64S = 0x80, /* debounce time (32/64sec) */ +}; +#define PCF50633_MBCC2_VBATCOND_MASK 0x03 +#define PCF50633_MBCC2_VMAX_MASK 0x3c + +#define PCF50633_OOCSTAT_ONKEY 0x01 + +/* this is to be provided by the board implementation */ +extern const u_int8_t pcf50633_initial_regs[__NUM_PCF50633_REGS]; + +void pcf50633_reg_write(u_int8_t reg, u_int8_t val); + +u_int8_t pcf50633_reg_read(u_int8_t reg); + +void pcf50633_reg_set_bit_mask(u_int8_t reg, u_int8_t mask, u_int8_t val); +void pcf50633_reg_clear_bits(u_int8_t reg, u_int8_t bits); + +void pcf50633_init(void); +void pcf50633_usb_maxcurrent(unsigned int ma); + +#endif /* _PCF50633_H */ + Index: u-boot/drivers/pcf50633.c =================================================================== --- /dev/null +++ u-boot/drivers/pcf50633.c @@ -0,0 +1,142 @@ +#include + +#ifdef CONFIG_DRIVER_PCF50633 + +#include +#include +#include +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) + +#define PCF50633_I2C_ADDR 0x73 + +void __pcf50633_reg_write(u_int8_t reg, u_int8_t val) +{ + i2c_write(PCF50633_I2C_ADDR, reg, 1, &val, 1); +} + +u_int8_t __pcf50633_reg_read(u_int8_t reg) +{ + u_int8_t tmp; + i2c_read(PCF50633_I2C_ADDR, reg, 1, &tmp, 1); + return tmp; +} + +void pcf50633_reg_write(u_int8_t reg, u_int8_t val) +{ + unsigned long flags; + + local_irq_save(flags); + __pcf50633_reg_write(reg, val); + local_irq_restore(flags); +} + +u_int8_t pcf50633_reg_read(u_int8_t reg) +{ + unsigned long flags; + u_int8_t tmp; + + local_irq_save(flags); + tmp = __pcf50633_reg_read(reg); + local_irq_restore(flags); + + return tmp; +} + +void pcf50633_reg_set_bit_mask(u_int8_t reg, u_int8_t mask, u_int8_t val) +{ + unsigned long flags; + u_int8_t tmp; + + local_irq_save(flags); + tmp = __pcf50633_reg_read(reg); + __pcf50633_reg_write(reg, (val & mask) | (tmp & ~mask)); + local_irq_restore(flags); +} + +void pcf50633_reg_clear_bits(u_int8_t reg, u_int8_t bits) +{ + unsigned long flags; + u_int8_t tmp; + + local_irq_save(flags); + tmp = pcf50633_reg_read(reg); + pcf50633_reg_write(reg, (tmp & ~bits)); + local_irq_restore(flags); +} + +static const u_int8_t regs_invalid[] = { + PCF50633_REG_VERSION, + PCF50633_REG_VARIANT, + PCF50633_REG_OOCSHDWN, + PCF50633_REG_INT1, + PCF50633_REG_INT2, + PCF50633_REG_INT3, + PCF50633_REG_INT4, + PCF50633_REG_INT5, + PCF50633_REG_OOCSTAT, + 0x2c, + PCF50633_REG_DCDCSTAT, + PCF50633_REG_LDOSTAT, + PCF50633_REG_MBCS1, + PCF50633_REG_MBCS2, + PCF50633_REG_MBCS3, + PCF50633_REG_ALMDATA, + 0x51, + /* 0x55 ... 0x6e: don't write */ + /* 0x6f ... 0x83: reserved */ +}; +#define PCF50633_LAST_REG 0x55 + +static int reg_is_invalid(u_int8_t reg) +{ + int i; + + /* all registers above 0x55 (ADCS1) except 0x84 */ + if (reg == PCF50633_REG_DCDCPFM) + return 0; + if (reg >= 0x55) + return 1; + + for (i = 0; i < ARRAY_SIZE(regs_invalid); i++) { + if (regs_invalid[i] > reg) + return 0; + if (regs_invalid[i] == reg) + return 1; + } + + return 0; +} + + +/* initialize PCF50633 register set */ +void pcf50633_init(void) +{ + unsigned long flags; + u_int8_t i; + + local_irq_save(flags); + for (i = 0; i < PCF50633_LAST_REG; i++) { + if (reg_is_invalid(i)) + continue; + __pcf50633_reg_write(i, pcf50633_initial_regs[i]); + } + local_irq_restore(flags); +} + +void pcf50633_usb_maxcurrent(unsigned int ma) +{ + u_int8_t val; + + if (ma < 100) + val = 0x03; + else if (ma < 500) + val = 0x00; + else if (ma < 1000) + val = 0x01; + else + val = 0x02; + + return pcf50633_reg_set_bit_mask(PCF50633_REG_MBCC7, 0x03, val); +} + +#endif /* CONFIG DRIVER_PCF50633 */ Index: u-boot/board/neo1973/common/lowlevel_init.S =================================================================== --- u-boot.orig/board/neo1973/common/lowlevel_init.S +++ u-boot/board/neo1973/common/lowlevel_init.S @@ -49,7 +49,7 @@ #define WAIT (0x1<<2) #define UBLB (0x1<<3) -#define B1_BWSCON (DW32) +#define B1_BWSCON (DW16 + WAIT + UBLB) #define B2_BWSCON (DW16) #define B3_BWSCON (DW16 + WAIT + UBLB) #define B4_BWSCON (DW16) @@ -68,9 +68,9 @@ /* BANK1CON */ #define B1_Tacs 0x0 /* 0clk */ -#define B1_Tcos 0x0 /* 0clk */ -#define B1_Tacc 0x7 /* 14clk */ -#define B1_Tcoh 0x0 /* 0clk */ +#define B1_Tcos 0x1 /* 1clk */ +#define B1_Tacc 0x4 /* 4clk */ +#define B1_Tcoh 0x1 /* 1clk */ #define B1_Tah 0x0 /* 0clk */ #define B1_Tacp 0x0 #define B1_PMC 0x0 @@ -112,7 +112,7 @@ #if defined (CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) #define B6_SCAN 0x1 /* 9bit */ #elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \ - defined(CONFIG_ARCH_GTA01B_v4) + defined(CONFIG_ARCH_GTA01B_v4) || defined(CONFIG_ARCH_GTA02_v1) #define B6_SCAN 0x2 /* 10bit */ #endif @@ -165,6 +165,18 @@ str r1, [r0] #endif +#if defined(CONFIG_ARCH_GTA02_v1) + /* enable KEEPACT to make sure PMU keeps us alive */ + ldr r0, =0x56000000 /* GPJ base */ + ldr r1, [r0, #0xd0] /* GPJCON */ + orr r1, r1, #(1 << 6) + str r1, [r0, #0xd0] + + ldr r1, [r0, #0xd4] /* GPJDAT */ + orr r1, r1, #(1 << 3) + str r1, [r0, #0xd4] +#endif + /* everything is fine now */ mov pc, lr Index: u-boot/board/neo1973/gta02/pcf50633.c =================================================================== --- /dev/null +++ u-boot/board/neo1973/gta02/pcf50633.c @@ -0,0 +1,91 @@ + +#include +#include + +/* initial register set for PCF50633 in Neo1973 GTA02 devices */ +const u_int8_t pcf50633_initial_regs[__NUM_PCF50633_REGS] = { + /* gap */ + [PCF50633_REG_INT1M] = PCF50633_INT1_SECOND, + [PCF50633_REG_INT2M] = PCF50633_INT2_EXTON3F | + PCF50633_INT2_EXTON3R | + PCF50633_INT2_EXTON2F | + PCF50633_INT2_EXTON2R | + PCF50633_INT2_EXTON1R | + PCF50633_INT2_EXTON1F, + [PCF50633_REG_INT3M] = PCF50633_INT3_ADCRDY, + [PCF50633_REG_INT4M] = 0x00, + [PCF50633_REG_INT5M] = 0x00, + + [PCF50633_REG_OOCWAKE] = 0xd3, /* wake from ONKEY,EXTON!,RTC,USB,ADP */ + [PCF50633_REG_OOCTIM1] = 0xaa, /* debounce 14ms everything */ + [PCF50633_REG_OOCTIM2] = 0x4a, + [PCF50633_REG_OOCMODE] = 0x55, + [PCF50633_REG_OOCCTL] = 0x44, + + [PCF50633_REG_GPIOCTL] = 0x01, /* only GPIO1 is input */ + [PCF50633_REG_GPIO2CFG] = 0x00, + [PCF50633_REG_GPIO3CFG] = 0x00, + [PCF50633_REG_GPOCFG] = 0x00, + + [PCF50633_REG_SVMCTL] = 0x08, /* 3.10V SYS voltage thresh. */ + [PCF50633_REG_BVMCTL] = 0x02, /* 2.80V BAT voltage thresh. */ + + [PCF50633_REG_STBYCTL1] = 0x00, + [PCF50633_REG_STBYCTL2] = 0x00, + + [PCF50633_REG_DEBPF1] = 0xff, + [PCF50633_REG_DEBPF2] = 0xff, + [PCF50633_REG_DEBPF2] = 0x3f, + + [PCF50633_REG_AUTOOUT] = 0x6b, /* 3.300V */ + [PCF50633_REG_AUTOENA] = 0x01, /* always on */ + [PCF50633_REG_AUTOCTL] = 0x00, /* automatic up/down operation */ + [PCF50633_REG_AUTOMXC] = 0x0a, /* 400mA at startup FIXME */ + + [PCF50633_REG_DOWN1OUT] = 0x1b, /* 1.3V (0x1b * .025V + 0.625V) */ + [PCF50633_REG_DOWN1ENA] = 0x02, /* enabled if GPIO1 = HIGH */ + [PCF50633_REG_DOWN1CTL] = 0x00, /* no DVM */ + [PCF50633_REG_DOWN1MXC] = 0x22, /* limit to 510mA at startup */ + + [PCF50633_REG_DOWN2OUT] = 0x2f, /* 1.8V (0x2f * .025V + 0.625V) */ + [PCF50633_REG_DOWN2ENA] = 0x02, /* enabled if GPIO1 = HIGH */ + [PCF50633_REG_DOWN2CTL] = 0x00, /* no DVM */ + [PCF50633_REG_DOWN2MXC] = 0x22, /* limit to 510mA at startup */ + + [PCF50633_REG_MEMLDOOUT] = 0x00, + [PCF50633_REG_MEMLDOENA] = 0x00, + + [PCF50633_REG_LEDOUT] = 0x2f, /* full backlight power */ + [PCF50633_REG_LEDENA] = 0x02, /* enabled if GPIO1 = HIGH */ + [PCF50633_REG_LEDCTL] = 0x05, /* ovp enabled, ocp 500mA */ + [PCF50633_REG_LEDDIM] = 0x20, /* dimming curve */ + + [PCF50633_REG_LDO1OUT] = 0x04, /* 1.3V (4 * 0.1V + 0.9V) */ + [PCF50633_REG_LDO1ENA] = 0x01, /* always on */ + + [PCF50633_REG_LDO2OUT] = 0x18, /* 3.3V (24 * 0.1V + 0.9V) */ + [PCF50633_REG_LDO2ENA] = 0x02, /* enabled if GPIO1 = HIGH */ + + [PCF50633_REG_LDO3OUT] = 0x15, /* 3.0V (21 * 0.1V + 0.9V) */ + [PCF50633_REG_LDO3ENA] = 0x02, /* enabled if GPIO1 = HIGH */ + + [PCF50633_REG_LDO4ENA] = 0x00, + [PCF50633_REG_LDO5ENA] = 0x00, + [PCF50633_REG_LDO6ENA] = 0x00, + + [PCF50633_REG_HCLDOOUT] = 0x18, /* 3.3V (24 * 0.1V + 0.9V) */ + [PCF50633_REG_HCLDOENA] = 0x00, /* off by default*/ + + [PCF50633_REG_DCDCPFM] = 0x00, /* off by default*/ + + [PCF50633_REG_MBCC1] = 0xe6, + [PCF50633_REG_MBCC2] = 0x28, /* Vbatconid=2.7V, Vmax=4.20V */ + [PCF50633_REG_MBCC3] = 0x19, /* 25/255 == 98mA pre-charge */ + [PCF50633_REG_MBCC4] = 0xff, /* 255/255 == 1A adapter fast */ + [PCF50633_REG_MBCC5] = 0x7f, /* 127/255 == 500mA usb fast */ + [PCF50633_REG_MBCC6] = 0x00, /* cutoff current 1/32 * Ichg */ + [PCF50633_REG_MBCC7] = 0x00, /* 1.6A max bat curr, USB 100mA */ + [PCF50633_REG_MBCC8] = 0x00, + + [PCF50633_REG_BBCCTL] = 0x19, /* 3V, 200uA, on */ +}; Index: u-boot/board/neo1973/gta02/config.mk =================================================================== --- /dev/null +++ u-boot/board/neo1973/gta02/config.mk @@ -0,0 +1,32 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, +# David Mueller, ELSOFT AG, +# +# FIC Neo1973 GTA01 board with S3C2410X (ARM920T) cpu +# +# see http://www.samsung.com/ for more information on SAMSUNG +# + +# GTA01v3 has 1 bank of 64 MB SDRAM +# GTA01v4 has 1 bank of 64 MB SDRAM +# +# 3000'0000 to 3400'0000 +# we load ourself to 33F8'0000 +# +# GTA01Bv2 or later has 1 bank of 128 MB SDRAM +# +# 3000'0000 to 3800'0000 +# we load ourself to 37F8'0000 +# +# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 +# optionally with a ramdisk at 3080'0000 +# +# download area is 3200'0000 or 3300'0000 + +CONFIG_USB_DFU_VENDOR=0x1457 +CONFIG_USB_DFU_PRODUCT=0x5119 + +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +TEXT_BASE = 0x33F80000 Index: u-boot/drivers/smedia3362.c =================================================================== --- /dev/null +++ u-boot/drivers/smedia3362.c @@ -0,0 +1,125 @@ +/* + * (C) Copyright 2007 by OpenMoko, Inc. + * Author: Harald Welte + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#if defined(CONFIG_VIDEO_GLAMO3362) + +#include +#include "videomodes.h" +#include +#include "smedia3362.h" + +/* + * Export Graphic Device + */ +GraphicDevice smi; + + +struct glamo_script { + u_int16_t reg; + u_int16_t val; +} __attribute__((packed)); + +/* from 'initial glamo 3365 script' */ +static struct glamo_script gl3362_init_script[] = { + /* clock */ + { GLAMO_REG_CLOCK_MEMORY, 0x300a }, + { GLAMO_REG_CLOCK_LCD, 0x10aa }, + { GLAMO_REG_CLOCK_MMC, 0x100a }, + { GLAMO_REG_CLOCK_ISP, 0x32aa }, + { GLAMO_REG_CLOCK_JPEG, 0x100a }, + { GLAMO_REG_CLOCK_3D, 0x302a }, + { GLAMO_REG_CLOCK_2D, 0x302a }, + //{ GLAMO_REG_CLOCK_RISC1, 0x1aaa }, + //{ GLAMO_REG_CLOCK_RISC2, 0x002a }, + { GLAMO_REG_CLOCK_MPEG, 0x3aaa }, + { GLAMO_REG_CLOCK_MPROC, 0x12aa }, + { 0xfffe, 5 }, + { GLAMO_REG_CLOCK_HOST, 0x000d }, + { GLAMO_REG_CLOCK_MEMORY, 0x000a }I, + { GLAMO_REG_CLOCK_LCD, 0x00ee }, + { GLAMO_REG_CLOCK_MMC, 0x000a }, + { GLAMO_REG_CLOCK_ISP, 0x02aa }, + { GLAMO_REG_CLOCK_JPEG, 0x000a }, + { GLAMO_REG_CLOCK_3D, 0x002a }, + { GLAMO_REG_CLOCK_2D, 0x002a }, + //{ GLAMO_REG_CLOCK_RISC1, 0x0aaa }, + //{ GLAMO_REG_CLOCK_RISC2, 0x002a }, + { GLAMO_REG_CLOCK_MPEG, 0x0aaa }, + { GLAMO_REG_CLOCK_MPROC, 0x02aa }, + { 0xfffe, 5 }, + { GLAMO_REG_PLL_GEN1, 0x061a }, /* PLL1=50MHz, OSCI=32kHz */ + { GLAMO_REG_PLL_GEN3, 0x09c3 }, /* PLL2=80MHz, OSCI=32kHz */ + { 0xfffe, 5 }, + { GLAMO_REG_CLOCK_GEN5_1, 0x18ff }, + { GLAMO_REG_CLOCK_GEN5_2, 0x051f }, + { GLAMO_REG_CLOCK_GEN6, 0x2000 }, + { GLAMO_REG_CLOCK_GEN7, 0x0105 }, + { GLAMO_REG_CLOCK_GEN8, 0x0100 }, + { GLAMO_REG_CLOCK_GEN10, 0x0017 }, + { GLAMO_REG_CLOCK_GEN11, 0x0017 }, + + /* hostbus interface */ + { GLAMO_REG_HOSTBUS(1), 0x0e00 }, + { GLAMO_REG_HOSTBUS(2), 0x07ff }, + { GLAMO_REG_HOSTBUS(4), 0x0080 }, + { GLAMO_REG_HOSTBUS(5), 0x0244 }, + { GLAMO_REG_HOSTBUS(6), 0x0600 }, + { GLAMO_REG_HOSTBUS(12), 0xf00e }, + + /* memory */ + { GLAMO_REG_MEM_TYPE, 0x0874 }, /* VRAM 8Mbyte */ + { GLAMO_REG_MEM_GEN, 0xafaf }, + { GLAMO_REG_MEM_TIMING(1), 0x0108 }, + { GLAMO_REG_MEM_TIMING(2), 0x0010 }, + { GLAMO_REG_MEM_TIMING(3), 0x0000 }, + { GLAMO_REG_MEM_TIMING(4), 0x0000 }, + { GLAMO_REG_MEM_TIMING(5), 0x0000 }, + { GLAMO_REG_MEM_TIMING(6), 0x0000 }, + { GLAMO_REG_MEM_TIMING(7), 0x0000 }, + { GLAMO_REG_MEM_TIMING(8), 0x1002 }, + { GLAMO_REG_MEM_TIMING(9), 0x6006 }, + { GLAMO_REG_MEM_TIMING(10), 0x00ff }, + { GLAMO_REG_MEM_TIMING(11), 0x0001 }, + { GLAMO_REG_MEM_POWER1, 0x0020 }, + { GLAMO_REG_MEM_POWRE2, 0x0000 }, + { GLAMO_REG_MEM_DRAM1, 0x0000 }, + { 0xfffe, 1 }, + { GLAMO_REG_MEM_DRAM1, 0xc100 }, + { GLAMO_REG_MEM_DRAM2, 0x01d6 }, +}; + +static int glamo3362_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(gl3362_init_script); i++) { + struct glamo_reg *reg = gl3362_init_script[i]; + + if (reg->reg == 0xfffe) + delay(reg->val); + else + gl3362_reg_write(reg->reg, reg->val); + } + /* FIXME */ +} + +#endif /* CONFIG_VIDEO_GLAMO3362 */ Index: u-boot/drivers/Makefile =================================================================== --- u-boot.orig/drivers/Makefile +++ u-boot/drivers/Makefile @@ -50,7 +50,7 @@ usbdcore.o usbdfu.o usbdcore_ep0.o usbdcore_omap1510.o usbdcore_s3c2410.o usbtty.o \ videomodes.o w83c553f.o \ ks8695eth.o \ - pcf50606.o \ + pcf50606.o pcf50633.o \ pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \ rpx_pcmcia.o \ fsl_i2c.o s3c2410_fb.o Index: u-boot/common/cmd_nand.c =================================================================== --- u-boot.orig/common/cmd_nand.c +++ u-boot/common/cmd_nand.c @@ -208,8 +208,10 @@ putc('\n'); for (i = 0; i < CFG_MAX_NAND_DEVICE; i++) { if (nand_info[i].name) - printf("Device %d: %s, sector size %lu KiB\n", + printf("Device %d: %s, page size %lu, " + "sector size %lu KiB\n", i, nand_info[i].name, + nand_info[i].oobblock, nand_info[i].erasesize >> 10); } return 0; Index: u-boot/drivers/nand/nand_ids.c =================================================================== --- u-boot.orig/drivers/nand/nand_ids.c +++ u-boot/drivers/nand/nand_ids.c @@ -67,7 +67,7 @@ {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0}, - {"NAND 512MiB 3,3V 8-bit", 0xDC, 512, 512, 0x4000, 0}, + //{"NAND 512MiB 3,3V 8-bit", 0xDC, 512, 512, 0x4000, 0}, /* These are the new chips with large page size. The pagesize * and the erasesize is determined from the extended id bytes Index: u-boot/board/neo1973/common/udc.c =================================================================== --- u-boot.orig/board/neo1973/common/udc.c +++ u-boot/board/neo1973/common/udc.c @@ -3,6 +3,7 @@ #include #include #include +#include void udc_ctrl(enum usbd_event event, int param) { @@ -23,6 +24,11 @@ defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \ defined(CONFIG_ARCH_GTA01B_v4) pcf50606_charge_autofast(param); +#elif defined(CONFIG_ARCH_GTA02_v1) + if (param) + pcf50633_usb_maxcurrent(500); + else + pcf50633_usb_maxcurrent(0); #endif break; default: