From 51f967864f0e30225c8a8e50e0bbaf92258c0032 Mon Sep 17 00:00:00 2001 From: Vikram Pandita Date: Thu, 20 Aug 2009 16:13:20 -0500 Subject: [PATCH 1/5] OMAP1/2/3/4: DEBUG_LL: cleanup This patch cleans up the DEBUG_LL infrastructure for omap boards. The three stages of log printing infrastructure is using their own #defines The patch integrates the three stages to use the same variable. Three stages are: Stage 1: Prints - Uncompressing Linux...... File getting used: arch/arm/plat-omap/include/mach/uncompress.h Stage 2: Prints - <5>Linux version 2.6.31 File getting used: arch/arm/plat-omap/include/mach/debug-macro.S Stage 3: Kernel ttyS console takes over On enabling the DEBUG_LL menuconfig item [Kernel Hacking -> Kernel low-level debugging functions] the following entry gets auto selected [Systerm Type -> TI OMAP Implementations -> Low-level Debug console UART] This is the physical address of the UART getting used for the board. The physical address of debug uart is provided as a menuconfig option now. Issue with current system: (a) Zoom2 board has a detachable debug board having the TL16CP754 Quad uart chip. If the debug board is not attached, _NO_ debug uart is available. OMAP internal uarts are not used for traces on zoom2 board. Current framework does not account for boards that may not have a debug uart at all. The Stage 1 always accesses one of the uarts. Thats fixed now. (b) this patch does a cleanup of arch/arm/plat-omap/include/mach/debug-macro.S Signed-off-by: Vikram Pandita --- arch/arm/plat-omap/Kconfig | 50 ++++++++++++++++++------- arch/arm/plat-omap/include/mach/common.h | 7 +++ arch/arm/plat-omap/include/mach/debug-macro.S | 40 ++++---------------- arch/arm/plat-omap/include/mach/uncompress.h | 12 +---- 4 files changed, 54 insertions(+), 55 deletions(-) diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index ab9f9ef..2fefb64 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -162,21 +162,43 @@ config OMAP_DM_TIMER help Select this option if you want to use OMAP Dual-Mode timers. -choice - prompt "Low-level debug console UART" - depends on ARCH_OMAP - default OMAP_LL_DEBUG_UART1 - -config OMAP_LL_DEBUG_UART1 - bool "UART1" - -config OMAP_LL_DEBUG_UART2 - bool "UART2" -config OMAP_LL_DEBUG_UART3 - bool "UART3" - -endchoice +config OMAP_DEBUG_LL_UART_PHY_ADDR + hex "Low-level debug console UART Physical Address" + depends on ARCH_OMAP && DEBUG_LL + + default "0xfffb0800" if ARCH_OMAP1 && (MACH_OMAP_PALMTT || MACH_SX1) + default "0xfffb0000" if ARCH_OMAP1 + default "0x4806e000" if ARCH_OMAP2 && MACH_NOKIA_N8X0 + default "0x4806a000" if ARCH_OMAP2 + default "0x49020000" if ARCH_OMAP3 && (MACH_NOKIA_RX51 || MACH_OMAP_BEAGLE) + default "0x49020000" if ARCH_OMAP3 && (MACH_OMAP3_PANDORA || MACH_OMAP_LDP || MACH_OVERO) + default "0x10000000" if ARCH_OMAP3 && MACH_OMAP_ZOOM2 + default "0x4806a000" if ARCH_OMAP3 + default "0x4806a000" if ARCH_OMAP4 + help + Specify the Physical address of Low level debug UART + Specify 0x0 in case you do not want DEBUG_LL functions to iterfere with your board uarts + + OMAP1: + ------------------- + UART1 -> 0xfffb0000 (default) + UART2 -> 0xfffb0800 + UART3 -> 0xfffb9800 (sx1, palmtt) + + OMAP2: + ------------------- + UART1 -> 0x4806a000 (default) + UART2 -> 0x4806c000 + UART3 -> 0x4806e000 (N8X0) + + OMAP3/4: + ------------------- + UART1 -> 0x4806a000 (default: except following) + UART2 -> 0x4806c000 + UART3 -> 0x49020000 (rx51, beagle, pendora, ldp, overo) + UART4 -> 0x4806e000 + UART_EXT -> 0x10000000 (zoom2: Debug uart is on external debug board) config OMAP_SERIAL_WAKE bool "Enable wake-up events for serial ports" diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h index fdeab42..f29d31f 100644 --- a/arch/arm/plat-omap/include/mach/common.h +++ b/arch/arm/plat-omap/include/mach/common.h @@ -68,4 +68,11 @@ void omap2_set_globals_sdrc(struct omap_globals *); void omap2_set_globals_control(struct omap_globals *); void omap2_set_globals_prcm(struct omap_globals *); +/* In case Low Level debug is not defined + * make the low level uart address as zero + */ +#if !defined(CONFIG_DEBUG_LL) +#define CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR 0 +#endif + #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S index ac24050..f546d6c 100644 --- a/arch/arm/plat-omap/include/mach/debug-macro.S +++ b/arch/arm/plat-omap/include/mach/debug-macro.S @@ -10,43 +10,19 @@ * published by the Free Software Foundation. * */ +#include "io.h" .macro addruart,rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? #ifdef CONFIG_ARCH_OMAP1 - moveq \rx, #0xff000000 @ physical base address - movne \rx, #0xfe000000 @ virtual base - orr \rx, \rx, #0x00fb0000 -#ifdef CONFIG_OMAP_LL_DEBUG_UART3 - orr \rx, \rx, #0x00009000 @ UART 3 -#endif -#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3) - orr \rx, \rx, #0x00000800 @ UART 2 & 3 -#endif - -#elif CONFIG_ARCH_OMAP2 - moveq \rx, #0x48000000 @ physical base address - movne \rx, #0xd8000000 @ virtual base - orr \rx, \rx, #0x0006a000 -#ifdef CONFIG_OMAP_LL_DEBUG_UART2 - add \rx, \rx, #0x00002000 @ UART 2 -#endif -#ifdef CONFIG_OMAP_LL_DEBUG_UART3 - add \rx, \rx, #0x00004000 @ UART 3 -#endif - -#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) - moveq \rx, #0x48000000 @ physical base address - movne \rx, #0xd8000000 @ virtual base - orr \rx, \rx, #0x0006a000 -#ifdef CONFIG_OMAP_LL_DEBUG_UART2 - add \rx, \rx, #0x00002000 @ UART 2 -#endif -#ifdef CONFIG_OMAP_LL_DEBUG_UART3 - add \rx, \rx, #0x00fb0000 @ UART 3 - add \rx, \rx, #0x00006000 -#endif + /* omap1 */ + ldr \rx, =CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR @ physical base address + subne \rx, #CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, #OMAP1_IO_OFFSET @ virtual base +#else + /* omap2/omap3/omap4 */ + ldr \rx, =CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR @ physical base address + orrne \rx, \rx, #OMAP2_IO_OFFSET @ virtual base #endif .endm diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/mach/uncompress.h index 0814c5f..0e21eb3 100644 --- a/arch/arm/plat-omap/include/mach/uncompress.h +++ b/arch/arm/plat-omap/include/mach/uncompress.h @@ -38,14 +38,8 @@ static void putc(int c) return; #endif -#ifdef CONFIG_ARCH_OMAP -#ifdef CONFIG_OMAP_LL_DEBUG_UART3 - uart = (volatile u8 *)(OMAP_UART3_BASE); -#elif defined(CONFIG_OMAP_LL_DEBUG_UART2) - uart = (volatile u8 *)(OMAP_UART2_BASE); -#else - uart = (volatile u8 *)(OMAP_UART1_BASE); -#endif +#if defined(CONFIG_DEBUG_LL) + uart = (volatile u8 *)(CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR); #ifdef CONFIG_ARCH_OMAP1 /* Determine which serial port to use */ @@ -62,7 +56,6 @@ static void putc(int c) return; } while (0); #endif /* CONFIG_ARCH_OMAP1 */ -#endif /* * Now, xmit each character @@ -70,6 +63,7 @@ static void putc(int c) while (!(uart[UART_LSR << shift] & UART_LSR_THRE)) barrier(); uart[UART_TX << shift] = c; +#endif /* CONFIG_DEBUG_LL */ } static inline void flush(void) -- 1.6.3.2