%poky; ] > Class files are used to abstract common functionality and share it amongst multiple .bb files. Any Metadata usually found in a .bb file can also be placed in a class file. Class files are identified by the extension .bbclass and are usually placed in a classes/ directory beneath the meta*/ directory found in the Source Directory. Class files can also be pointed to by BUILDDIR (e.g. build/)in the same way as .conf files in the conf directory. Class files are searched for in BBPATH using the same method by which .conf files are searched. In most cases inheriting the class is enough to enable its features, although for some classes you might need to set variables or override some of the default behavior. This chapter discusses only the most useful and important classes. Other classes do exist within the meta/classes directory in the Source Directory. You can reference the .bbclass files directly for more information.

The base class is special in that every .bb file inherits it automatically. This class contains definitions for standard basic tasks such as fetching, unpacking, configuring (empty by default), compiling (runs any Makefile present), installing (empty by default) and packaging (empty by default). These classes are often overridden or extended by other classes such as autotools.bbclass or package.bbclass. The class also contains some commonly used functions such as oe_runmake.

Autotools (autoconf, automake, and libtool) bring standardization. This class defines a set of tasks (configure, compile etc.) that work for all Autotooled packages. It should usually be enough to define a few standard variables and then simply inherit autotools. This class can also work with software that emulates Autotools. For more information, see the "Autotooled Package" section in the Yocto Project Development Manual. It's useful to have some idea of how the tasks defined by this class work and what they do behind the scenes. do_configure ‐ Regenerates the configure script (using autoreconf) and then launches it with a standard set of arguments used during cross-compilation. You can pass additional parameters to configure through the EXTRA_OECONF variable. do_compile ‐ Runs make with arguments that specify the compiler and linker. You can pass additional arguments through the EXTRA_OEMAKE variable. do_install ‐ Runs make install and passes a destination directory option, which takes its value from the standard DESTDIR variable.

This class helps the alternatives system when multiple sources provide the same command. This situation occurs when several programs that have the same or similar function are installed with the same name. For example, the ar command is available from the busybox, binutils and elfutils packages. The update-alternatives.bbclass class handles renaming the binaries so that multiple packages can be installed without conflicts. The ar command still works regardless of which packages are installed or subsequently removed. The class renames the conflicting binary in each package and symlinks the highest priority binary during installation or removal of packages. To use this class, you need to define a number of variables. These variables list alternative commands needed by a package, provide pathnames for links, default links for targets, and so forth. For details on how to use this class, see the comments in the update-alternatives.bbclass. You can use the update-alternatives command directly in your recipes. However, this class simplifies things in most cases.

This class uses update-rc.d to safely install an initialization script on behalf of the package. The OpenEmbedded build system takes care of details such as making sure the script is stopped before a package is removed and started when the package is installed. Three variables control this class: INITSCRIPT_PACKAGES, INITSCRIPT_NAME and INITSCRIPT_PARAMS. See the variable links for details.

Before pkg-config had become widespread, libraries shipped shell scripts to give information about the libraries and include paths needed to build software (usually named LIBNAME-config). This class assists any recipe using such scripts. During staging, BitBake installs such scripts into the sysroots/ directory. BitBake also changes all paths to point into the sysroots/ directory so all builds that use the script will use the correct directories for the cross compiling layout.

This class renames packages so that they follow the Debian naming policy (i.e. eglibc becomes libc6 and eglibc-devel becomes libc6-dev.

pkg-config brought standardization and this class aims to smooth integration of pkg-config into libraries that use it. During staging, BitBake installs pkg-config data into the sysroots/ directory. By making use of sysroot functionality within pkg-config, this class no longer has to manipulate the files.

Many software licenses require that source files be provided along with the binaries. To simplify this process, two classes were created: src_distribute.bbclass and src_distribute_local.bbclass. The results of these classes are tmp/deploy/source/ subdirectories with sources sorted by LICENSE field. If recipes list few licenses (or have entries like "Bitstream Vera"), the source archive is placed in each license directory. This class operates using three modes: copy: Copies the files to the distribution directory. symlink: Creates symbolic links for the files to the distribution directory. move+symlink: Moves the files into the distribution directory and then creates symbolic links back to where they originated.

Recipes for Perl modules are simple. These recipes usually only need to point to the source's archive and then inherit the proper .bbclass file. Building is split into two methods depending on which method the module authors used. Modules that use old Makefile.PL-based build system require cpan.bbclass in their recipes. Modules that use Build.PL-based build system require using cpan_build.bbclass in their recipes.

Recipes for Python extensions are simple. These recipes usually only need to point to the source's archive and then inherit the proper .bbclass file. Building is split into two methods depending on which method the module authors used. Extensions that use an Autotools-based build system require Autotools and distutils-based .bbclasse files in their recipes. Extensions that use distutils-based build systems require distutils.bbclass in their recipes.

This class adds the devshell task. Distribution policy dictates whether to include this class. See the "Using a Development Shell" section in the Yocto Project Development Manual for more information about using devshell.

This class sets default values appropriate for package group recipes (e.g. PACKAGES, PACKAGE_ARCH, ALLOW_EMPTY, and so forth). It is highly recommended that all package group recipes inherit this class. For information on how to use this class, see the "Customizing Images Using Custom Package Groups" section in the Yocto Project Development Manual. Previously, this class was named task.bbclass.

The packaging classes add support for generating packages from a build's output. The core generic functionality is in package.bbclass. The code specific to particular package types is contained in various sub-classes such as package_deb.bbclass, package_ipk.bbclass, and package_rpm.bbclass. Most users will want one or more of these classes. You can control the list of resulting package formats by using the PACKAGE_CLASSES variable defined in the local.conf configuration file, which is located in the conf folder of the Source Directory. When defining the variable, you can specify one or more package types. Since images are generated from packages, a packaging class is needed to enable image generation. The first class listed in this variable is used for image generation. The package class you choose can affect build-time performance and has space ramifications. In general, building a package with RPM takes about thirty percent more time as compared to using IPK to build the same or similar package. This comparison takes into account a complete build of the package with all dependencies previously built. The reason for this discrepancy is because the RPM package manager creates and processes more Metadata than the IPK package manager. Consequently, you might consider setting PACKAGE_CLASSES to "package_ipk" if you are building smaller systems. Keep in mind, however, that RPM starts to provide more abilities than IPK due to the fact that it processes more metadata. For example, this information includes individual file types, file checksum generation and evaluation on install, sparse file support, conflict detection and resolution for Multilib systems, ACID style upgrade, and repackaging abilities for rollbacks. Another consideration for packages built using the RPM package manager is space. For smaller systems, the extra space used for the Berkley Database and the amount of metadata can affect your ability to perform on-device upgrades. You can find additional information on the effects of the package class at these two Yocto Project mailing list links: https://lists.yoctoproject.org/pipermail/poky/2011-May/006362.html https://lists.yoctoproject.org/pipermail/poky/2011-May/006363.html

This class handles building Linux kernels. The class contains code to build all kernel trees. All needed headers are staged into the STAGING_KERNEL_DIR directory to allow out-of-tree module builds using module.bbclass. This means that each built kernel module is packaged separately and inter-module dependencies are created by parsing the modinfo output. If all modules are required, then installing the kernel-modules package installs all packages with modules and various other kernel packages such as kernel-vmlinux. Various other classes are used by the kernel and module classes internally including kernel-arch.bbclass, module_strip.bbclass, module-base.bbclass, and linux-kernel-base.bbclass.

These classes add support for creating images in several formats. First, the root filesystem is created from packages using one of the rootfs_*.bbclass files (depending on the package format used) and then the image is created. The IMAGE_FSTYPES variable controls the types of images to generate. The IMAGE_INSTALL variable controls the list of packages to install into the image.

This class checks to see if prerequisite software is present so that users can be notified of potential problems that might affect their build. The class also performs basic user configuration checks from the local.conf configuration file to prevent common mistakes that cause build failures. Distribution policy usually determines whether to include this class.

This class adds a step to the package generation process that sanity checks the packages generated by the OpenEmbedded build system. A range of checks are performed that check the build's output for common problems that show up during runtime. Distribution policy usually dictates whether to include this class. You can configure the sanity checks so that specific test failures either raise a warning or an error message. Typically, failures for new tests generate a warning. Subsequent failures for the same test would then generate an error message once the metadata is in a known and good condition. You use the WARN_QA variable to specify tests for which you want to generate a warning message on failure. You use the ERROR_QA variable to specify tests for which you want to generate an error message on failure. The following list shows the tests you can list with the WARN_QA and ERROR_QA variables: ldflags: Ensures that the binaries were linked with the LDFLAGS options provided by the build system. If this test fails, check that the LDFLAGS variable is being passed to the linker command. useless-rpaths: Checks for dynamic library load paths (rpaths) in the binaries that by default on a standard system are searched by the linker (e.g. /lib and /usr/lib). While these paths will not cause any breakage, they do waste space and are unnecessary. rpaths: Checks for rpaths in the binaries that contain build system paths such as TMPDIR. If this test fails, bad -rpath options are being passed to the linker commands and your binaries have potential security issues. dev-so: Checks that the .so symbolic links are in the -dev package and not in any of the other packages. In general, these symlinks are only useful for development purposes. Thus, the -dev package is the correct location for them. Some very rare cases do exist for dynamically loaded modules where these symlinks are needed instead in the main package. debug-files: Checks for .debug directories in anything but the -dbg package. The debug files should all be in the -dbg package. Thus, anything packaged elsewhere is incorrect packaging. arch: Checks the Executable and Linkable Format (ELF) type, bit size, and endianness of any binaries to ensure they match the target architecture. This test fails if any binaries don't match the type since there would be an incompatibility. Sometimes software, like bootloaders, might need to bypass this check. debug-deps: Checks that -dbg packages only depend on other -dbg packages and not on any other types of packages, which would cause a packaging bug. dev-deps: Checks that -dev packages only depend on other -dev packages and not on any other types of packages, which would be a packaging bug. pkgconfig: Checks .pc files for any TMPDIR/WORKDIR paths. Any .pc file containing these paths is incorrect since pkg-config itself adds the correct sysroot prefix when the files are accessed. la: Checks .la files for any TMPDIR paths. Any .la file containing these paths is incorrect since libtool adds the correct sysroot prefix when using the files automatically itself. desktop: Runs the desktop-file-validate program against any .desktop files to validate their contents against the specification for .desktop files.

Autotools can require tests that must execute on the target hardware. Since this is not possible in general when cross compiling, site information is used to provide cached test results so these tests can be skipped over but still make the correct values available. The meta/site directory contains test results sorted into different categories such as architecture, endianness, and the libc used. Site information provides a list of files containing data relevant to the current build in the CONFIG_SITE variable that Autotools automatically picks up. The class also provides variables like SITEINFO_ENDIANNESS and SITEINFO_BITS that can be used elsewhere in the metadata. Because this class is included from base.bbclass, it is always active.

If you have packages that install files that are owned by custom users or groups, you can use this class to specify those packages and associate the users and groups with those packages. The meta-skeleton/recipes-skeleton/useradd/useradd-example.bb recipe in the Source Directory provides a simple example that shows how to add three users and groups to two packages. See the useradd-example.bb for more information on how to use this class.

You can use this class to build software from source code that is external to the OpenEmbedded build system. In other words, your source code resides in an external tree outside of the Yocto Project. Building software from an external source tree means that the normal fetch, unpack, and patch process is not used. To use the class, you need to define the S variable to point to the directory that contains the source files. You also need to have your recipe inherit the externalsrc.bbclass class. This class expects the source code to support recipe builds that use the B variable to point to the directory in which the OpenEmbedded build system places the generated objects built from the recipes. By default, the B directory is set to the following, which is separate from the Source Directory (S): ${WORKDIR}/${BPN}/{PV}/ See the glossary entries for the WORKDIR, BPN, PV, S, and B for more information. You can build object files in the external tree by setting the B variable equal to "${S}". However, this practice does not work well if you use the source for more than one variant (i.e., "natives" such as quilt-native, or "crosses" such as gcc-cross). So, be sure there are no "native", "cross", or "multilib" variants of the recipe. If you do want to build different variants of a recipe, you can use the BBCLASSEXTEND variable. When you do, the B variable must support the recipe's ability to build variants in different working directories. Most Autotools-based recipes support separating these directories. The OpenEmbedded build system defaults to using separate directories for gcc and some kernel recipes. Alternatively, you can make sure that separate recipes exist that each use the BBCLASSEXTEND variable to build each variant. The separate recipes can inherit a single target recipe. For information on how to use this class, see the "Building Software from an External Source" section in the Yocto Project Development Manual.

Thus far, this chapter has discussed only the most useful and important classes. However, other classes exist within the meta/classes directory in the Source Directory. You can examine the .bbclass files directly for more information.