%poky; ] > This chapter provides information you can use to migrate work to a newer Yocto Project release. You can find the same information in the release notes for a given release.

Some considerations are not tied to a specific Yocto Project release. This section presents information you should consider when migrating to any new Yocto Project release. Dealing with Customized Recipes: Issues could arise if you take older recipes that contain customizations and simply copy them forward expecting them to work after you migrate to new Yocto Project metadata. For example, suppose you have a recipe in your layer that is a customized version of a core recipe copied from the earlier release, rather than through the use of an append file. When you migrate to a newer version of Yocto Project, the metadata (e.g. perhaps an include file used by the recipe) could have changed in a way that would break the build. Say, for example, a function is removed from an include file and the customized recipe tries to call that function. You could "forward-port" all your customizations in your recipe so that everything works for the new release. However, this is not the optimal solution as you would have to repeat this process with each new release if changes occur that give rise to problems. The better solution (where practical) is to use append files (*.bbappend) to capture any customizations you want to make to a recipe. Doing so, isolates your changes from the main recipe making them much more manageable. However, sometimes it is not practical to use an append file. A good example of this is when introducing a newer or older version of a recipe in another layer. Updating Append Files: Since append files generally only contain your customizations, they often do not need to be adjusted for new releases. However, if the .bbappend file is specific to a particular version of the recipe (i.e. its name does not use the % wildcard) and the version of the recipe to which it is appending has changed, then you will at a minimum need to rename the append file to match the name of the recipe file. A mismatch between an append file and its corresponding recipe file (.bb) will trigger an error during parsing. Depending on the type of customization the append file applies, other incompatibilities might occur when you upgrade. For example, if your append file applies a patch and the recipe to which it is appending is updated to a newer version, the patch might no longer apply. If this is the case and assuming the patch is still needed, you must modify the patch file so that it does apply.

This section provides migration information for moving to the Yocto Project 1.3 Release from the prior release.

Differences include changes for SSTATE_MIRRORS and bblayers.conf.

The shared state cache (sstate-cache), as pointed to by SSTATE_DIR, by default now has two-character subdirectories to prevent issues arising from too many files in the same directory. Also, native sstate-cache packages, which are built to run on the host system, will go into a subdirectory named using the distro ID string. If you copy the newly structured sstate-cache to a mirror location (either local or remote) and then point to it in SSTATE_MIRRORS, you need to append "PATH" to the end of the mirror URL so that the path used by BitBake before the mirror substitution is appended to the path used to access the mirror. Here is an example: SSTATE_MIRRORS = "file://.* http://someserver.tld/share/sstate/PATH"

The meta-yocto layer consists of two parts that correspond to the Poky reference distribution and the reference hardware Board Support Packages (BSPs), respectively: meta-yocto and meta-yocto-bsp. When running BitBake for the first time after upgrading, your conf/bblayers.conf file will be updated to handle this change and you will be asked to re-run or restart for the changes to take effect.

Differences include changes for the following: Python function whitespace proto= in SRC_URI nativesdk Task recipes IMAGE_FEATURES Removed recipes

All Python functions must now use four spaces for indentation. Previously, an inconsistent mix of spaces and tabs existed, which made extending these functions using _append or _prepend complicated given that Python treats whitespace as syntactically significant. If you are defining or extending any Python functions (e.g. populate_packages, do_unpack, do_patch and so forth) in custom recipes or classes, you need to ensure you are using consistent four-space indentation.

Any use of proto= in SRC_URI needs to be changed to protocol=. In particular, this applies to the following URIs: svn:// bzr:// hg:// osc:// Other URIs were already using protocol=. This change improves consistency.

The suffix nativesdk is now implemented as a prefix, which simplifies a lot of the packaging code for nativesdk recipes. All custom nativesdk recipes, which are relocatable packages that are native to SDK_ARCH, and any references need to be updated to use nativesdk-* instead of *-nativesdk.

"Task" recipes are now known as "Package groups" and have been renamed from task-*.bb to packagegroup-*.bb. Existing references to the previous task-* names should work in most cases as there is an automatic upgrade path for most packages. However, you should update references in your own recipes and configurations as they could be removed in future releases. You should also rename any custom task-* recipes to packagegroup-*, and change them to inherit packagegroup instead of task, as well as taking the opportunity to remove anything now handled by packagegroup.bbclass, such as providing -dev and -dbg packages, setting LIC_FILES_CHKSUM, and so forth. See the "packagegroup.bbclass" section for further details.

Image recipes that previously included "apps-console-core" in IMAGE_FEATURES should now include "splash" instead to enable the boot-up splash screen. Retaining "apps-console-core" will still include the splash screen but generates a warning. The "apps-x11-core" and "apps-x11-games" IMAGE_FEATURES features have been removed.

The following recipes have been removed. For most of them, it is unlikely that you would have any references to them in your own Metadata. However, you should check your metadata against this list to be sure: libx11-trim: Replaced by libx11, which has a negligible size difference with modern Xorg. xserver-xorg-lite: Use xserver-xorg, which has a negligible size difference when DRI and GLX modules are not installed. xserver-kdrive: Effectively unmaintained for many years. mesa-xlib: No longer serves any purpose. galago: Replaced by telepathy. gail: Functionality was integrated into GTK+ 2.13. eggdbus: No longer needed. gcc-*-intermediate: The build has been restructured to avoid the need for this step. libgsmd: Unmaintained for many years. Functionality now provided by ofono instead. contacts, dates, tasks, eds-tools: Largely unmaintained PIM application suite. It has been moved to meta-gnome in meta-openembedded. In addition to the previously listed changes, the meta-demoapps directory has also been removed because the recipes in it were not being maintained and many had become obsolete or broken. Additionally, these recipes were not parsed in the default configuration. Many of these recipes are already provided in an updated and maintained form within the OpenEmbedded community layers such as meta-oe and meta-gnome. For the remainder, you can now find them in the meta-extras repository, which is in the Yocto Project Source Repositories.

The naming scheme for kernel output binaries has been changed to now include PE as part of the filename: KERNEL_IMAGE_BASE_NAME ?= "${KERNEL_IMAGETYPE}-${PE}-${PV}-${PR}-${MACHINE}-${DATETIME}" Because the PE variable is not set by default, these binary files could result with names that include two dash characters. Here is an example: bzImage--3.10.9+git0+cd502a8814_7144bcc4b8-r0-qemux86-64-20130830085431.bin

This section provides migration information for moving to the Yocto Project 1.4 Release from the prior release.

Differences include the following: Comment Continuation: If a comment ends with a line continuation (\) character, then the next line must also be a comment. Any instance where this is not the case, now triggers a warning. You must either remove the continuation character, or be sure the next line is a comment. Package Name Overrides: The runtime package specific variables RDEPENDS, RRECOMMENDS, RSUGGESTS, RPROVIDES, RCONFLICTS, RREPLACES, FILES, ALLOW_EMPTY, and the pre, post, install, and uninstall script functions pkg_preinst, pkg_postinst, pkg_prerm, and pkg_postrm should always have a package name override. For example, use RDEPENDS_${PN} for the main package instead of RDEPENDS. BitBake uses more strict checks when it parses recipes.

Differences include the following: Shared State Code: The shared state code has been optimized to avoid running unnecessary tasks. For example, the following no longer populates the target sysroot since that is not necessary: $ bitbake -c rootfs some-image Instead, the system just needs to extract the output package contents, re-create the packages, and construct the root filesystem. This change is unlikely to cause any problems unless you have missing declared dependencies. Scanning Directory Names: When scanning for files in SRC_URI, the build system now uses FILESOVERRIDES instead of OVERRIDES for the directory names. In general, the values previously in OVERRIDES are now in FILESOVERRIDES as well. However, if you relied upon an additional value you previously added to OVERRIDES, you might now need to add it to FILESOVERRIDES unless you are already adding it through the MACHINEOVERRIDES or DISTROOVERRIDES variables, as appropriate. For more related changes, see the "Variables" section.

A new oe-git-proxy script has been added to replace previous methods of handling proxies and fetching source from Git. See the meta-yocto/conf/site.conf.sample file for information on how to use this script.

If you have created your own custom etc/network/interfaces file by creating an append file for the netbase recipe, you now need to create an append file for the init-ifupdown recipe instead, which you can find in the Source Directory at meta/recipes-core/init-ifupdown. For information on how to use append files, see the "Using .bbappend Files" in the Yocto Project Development Tasks Manual.

Support for remote debugging with the Eclipse IDE is now separated into an image feature (eclipse-debug) that corresponds to the packagegroup-core-eclipse-debug package group. Previously, the debugging feature was included through the tools-debug image feature, which corresponds to the packagegroup-core-tools-debug package group.

The following variables have changed: SANITY_TESTED_DISTROS: This variable now uses a distribution ID, which is composed of the host distributor ID followed by the release. Previously, SANITY_TESTED_DISTROS was composed of the description field. For example, "Ubuntu 12.10" becomes "Ubuntu-12.10". You do not need to worry about this change if you are not specifically setting this variable, or if you are specifically setting it to "". SRC_URI: The ${PN}, ${PF}, ${P}, and FILE_DIRNAME directories have been dropped from the default value of the FILESPATH variable, which is used as the search path for finding files referred to in SRC_URI. If you have a recipe that relied upon these directories, which would be unusual, then you will need to add the appropriate paths within the recipe or, alternatively, rearrange the files. The most common locations are still covered by ${BP}, ${BPN}, and "files", which all remain in the default value of FILESPATH.

If runtime package management is enabled and the RPM backend is selected, Smart is now installed for package download, dependency resolution, and upgrades instead of Zypper. For more information on how to use Smart, run the following command on the target: smart --help

The following recipes were moved from their previous locations because they are no longer used by anything in the OpenEmbedded-Core: clutter-box2d: Now resides in the meta-oe layer. evolution-data-server: Now resides in the meta-gnome layer. gthumb: Now resides in the meta-gnome layer. gtkhtml2: Now resides in the meta-oe layer. gupnp: Now resides in the meta-multimedia layer. gypsy: Now resides in the meta-oe layer. libcanberra: Now resides in the meta-gnome layer. libgdata: Now resides in the meta-gnome layer. libmusicbrainz: Now resides in the meta-multimedia layer. metacity: Now resides in the meta-gnome layer. polkit: Now resides in the meta-oe layer. zeroconf: Now resides in the meta-networking layer.

The following list shows what has been removed or renamed: evieext: Removed because it has been removed from xserver since 2008. Gtk+ DirectFB: Removed support because upstream Gtk+ no longer supports it as of version 2.18. libxfontcache / xfontcacheproto: Removed because they were removed from the Xorg server in 2008. libxp / libxprintapputil / libxprintutil / printproto: Removed because the XPrint server was removed from Xorg in 2008. libxtrap / xtrapproto: Removed because their functionality was broken upstream. linux-yocto 3.0 kernel: Removed with linux-yocto 3.8 kernel being added. The linux-yocto 3.2 and linux-yocto 3.4 kernels remain as part of the release. lsbsetup: Removed with functionality now provided by lsbtest. matchbox-stroke: Removed because it was never more than a proof-of-concept. matchbox-wm-2 / matchbox-theme-sato-2: Removed because they are not maintained. However, matchbox-wm and matchbox-theme-sato are still provided. mesa-dri: Renamed to mesa. mesa-xlib: Removed because it was no longer useful. mutter: Removed because nothing ever uses it and the recipe is very old. orinoco-conf: Removed because it has become obsolete. update-modules: Removed because it is no longer used. The kernel module postinstall and postrm scripts can now do the same task without the use of this script. web: Removed because it is not maintained. Superseded by web-webkit. xf86bigfontproto: Removed because upstream it has been disabled by default since 2007. Nothing uses xf86bigfontproto. xf86rushproto: Removed because its dependency in xserver was spurious and it was removed in 2005. zypper / libzypp / sat-solver: Removed and been functionally replaced with Smart (python-smartpm) when RPM packaging is used and package management is enabled on the target.

This section provides migration information for moving to the Yocto Project 1.5 Release from the prior release.

The OpenEmbedded build system now has some additional requirements on the host system: Python 2.7.3+ Tar 1.24+ Git 1.7.8+ Patched version of Make if you are using 3.82. Most distributions that provide Make 3.82 use the patched version. If the Linux distribution you are using on your build host does not provide packages for these, you can install and use the Buildtools tarball, which provides an SDK-like environment containing them. For more information on this requirement, see the "Required Git, tar, and Python Versions" section.

The atom-pc hardware reference BSP has been replaced by a genericx86 BSP. This BSP is not necessarily guaranteed to work on all x86 hardware, but it will run on a wider range of systems than the atom-pc did. Additionally, a genericx86-64 BSP has been added for 64-bit Atom systems.

The following changes have been made that relate to BitBake: BitBake now supports a _remove operator. The addition of this operator means you will have to rename any items in recipe space (functions, variables) whose names currently contain _remove_ or end with _remove to avoid unexpected behavior. BitBake's global method pool has been removed. This method is not particularly useful and led to clashes between recipes containing functions that had the same name. The "none" server backend has been removed. The "process" server backend has been serving well as the default for a long time now. The bitbake-runtask script has been removed. ${P} and ${PF} are no longer added to PROVIDES by default in bitbake.conf. These version-specific PROVIDES items were seldom used. Attempting to use them could result in two versions being built simultaneously rather than just one version due to the way BitBake resolves dependencies.

The following changes have been made to the package QA checks: If you have customized ERROR_QA or WARN_QA values in your configuration, check that they contain all of the issues that you wish to be reported. Previous Yocto Project versions contained a bug that meant that any item not mentioned in ERROR_QA or WARN_QA would be treated as a warning. Consequently, several important items were not already in the default value of WARN_QA. All of the possible QA checks are now documented in the "insane.bbclass" section. An additional QA check has been added to check if /usr/share/info/dir is being installed. Your recipe should delete this file within do_install if "make install" is installing it. If you are using the buildhistory class, the check for the package version going backwards is now controlled using a standard QA check. Thus, if you have customized your ERROR_QA or WARN_QA values and still wish to have this check performed, you should add "version-going-backwards" to your value for one or the other variables depending on how you wish it to be handled. See the documented QA checks in the "insane.bbclass" section.

The following directory changes exist: Output SDK installer files are now named to include the image name and tuning architecture through the SDK_NAME variable. Images and related files are now installed into a directory that is specific to the machine, instead of a parent directory containing output files for multiple machines. The DEPLOY_DIR_IMAGE variable continues to point to the directory containing images for the current MACHINE and should be used anywhere there is a need to refer to this directory. The runqemu script now uses this variable to find images and kernel binaries and will use BitBake to determine the directory. Alternatively, you can set the DEPLOY_DIR_IMAGE variable in the external environment. When buildhistory is enabled, its output is now written under the Build Directory rather than TMPDIR. Doing so makes it easier to delete TMPDIR and preserve the build history. Additionally, data for produced SDKs is now split by IMAGE_NAME. The pkgdata directory produced as part of the packaging process has been collapsed into a single machine-specific directory. This directory is located under sysroots and uses a machine-specific name (i.e. tmp/sysroots/machine/pkgdata).

BitBake will now shorten revisions from Git repositories from the normal 40 characters down to 10 characters within SRCPV for improved usability in path and file names. This change should be safe within contexts where these revisions are used because the chances of spatially close collisions is very low. Distant collisions are not a major issue in the way the values are used.

The following changes have been made that relate to IMAGE_FEATURES: The value of IMAGE_FEATURES is now validated to ensure invalid feature items are not added. Some users mistakenly add package names to this variable instead of using IMAGE_INSTALL in order to have the package added to the image, which does not work. This change is intended to catch those kinds of situations. Valid IMAGE_FEATURES are drawn from PACKAGE_GROUP definitions, COMPLEMENTARY_GLOB and a new "validitems" varflag on IMAGE_FEATURES. The "validitems" varflag change allows additional features to be added if they are not provided using the previous two mechanisms. The previously deprecated "apps-console-core" IMAGE_FEATURES item is no longer supported. Add "splash" to IMAGE_FEATURES if you wish to have the splash screen enabled, since this is all that apps-console-core was doing.

The /run directory from the Filesystem Hierarchy Standard 3.0 has been introduced. You can find some of the implications for this change here. The change also means that recipes that install files to /var/run must be changed. You can find a guide on how to make these changes here.

The image core-image-minimal no longer adds remove_packaging_data_files to ROOTFS_POSTPROCESS_COMMAND. This addition is now handled automatically when "package-management" is not in IMAGE_FEATURES. If you have custom image recipes that make this addition, you should remove the lines, as they are not needed and might interfere with correct operation of postinstall scripts.

The do_rootfs and other related image construction tasks are no longer marked as "nostamp". Consequently, they will only be re-executed when their inputs have changed. Previous versions of the OpenEmbedded build system always rebuilt the image when requested rather when necessary.

The previously deprecated task.bbclass has now been dropped. For recipes that previously inherited from this class, you should rename them from task-* to packagegroup-* and inherit packagegroup instead. For more information, see the "packagegroup.bbclass" section.

By default, we now split BusyBox into two binaries: one that is suid root for those components that need it, and another for the rest of the components. Splitting BusyBox allows for optimization that eliminates the tinylogin recipe as recommended by upstream. You can disable this split by setting BUSYBOX_SPLIT_SUID to "0".

A new automated image testing framework has been added through the testimage.bbclass class. This framework replaces the older imagetest-qemu framework. You can learn more about performing automated image tests in the "Performing Automated Runtime Testing" section in the Yocto Project Development Tasks Manual.

Following are changes to Build History: Installed package sizes: installed-package-sizes.txt for an image now records the size of the files installed by each package instead of the size of each compressed package archive file. The dependency graphs (depends*.dot) now use the actual package names instead of replacing dashes, dots and plus signs with underscores. The buildhistory-diff and buildhistory-collect-srcrevs utilities have improved command-line handling. Use the --help option for each utility for more information on the new syntax. For more information on Build History, see the "Maintaining Build Output Quality" section in the Yocto Project Development Tasks Manual.

Following are changes to udev: udev no longer brings in udev-extraconf automatically through RRECOMMENDS, since this was originally intended to be optional. If you need the extra rules, then add udev-extraconf to your image. udev no longer brings in pciutils-ids or usbutils-ids through RRECOMMENDS. These are not needed by udev itself and removing them saves around 350KB.

The linux-yocto 3.2 kernel has been removed. libtool-nativesdk has been renamed to nativesdk-libtool. tinylogin has been removed. It has been replaced by a suid portion of Busybox. See the "BusyBox" section for more information. external-python-tarball has been renamed to buildtools-tarball. web-webkit has been removed. It has been functionally replaced by midori. imake has been removed. It is no longer needed by any other recipe. transfig-native has been removed. It is no longer needed by any other recipe. anjuta-remote-run has been removed. Anjuta IDE integration has not been officially supported for several releases.

Following is a list of short entries describing other changes: run-postinsts: Make this generic. base-files: Remove the unnecessary media/xxx directories. alsa-state: Provide an empty asound.conf by default. classes/image: Ensure BAD_RECOMMENDATIONS supports pre-renamed package names. classes/rootfs_rpm: Implement BAD_RECOMMENDATIONS for RPM. systemd: Remove systemd_unitdir if systemd is not in DISTRO_FEATURES. systemd: Remove init.d dir if systemd unit file is present and sysvinit is not a distro feature. libpam: Deny all services for the OTHER entries. image.bbclass: Move runtime_mapping_rename to avoid conflict with multilib. See YOCTO #4993 in Bugzilla for more information. linux-dtb: Use kernel build system to generate the dtb files. kern-tools: Switch from guilt to new kgit-s2q tool.

This section provides migration information for moving to the Yocto Project 1.6 Release from the prior release.

The archiver class has been rewritten and its configuration has been simplified. For more details on the source archiver, see the "Maintaining Open Source License Compliance During Your Product's Lifecycle" section in the Yocto Project Development Tasks Manual.

The following packaging changes have been made: The binutils recipe no longer produces a binutils-symlinks package. update-alternatives is now used to handle the preferred binutils variant on the target instead. The tc (traffic control) utilities have been split out of the main iproute2 package and put into the iproute2-tc package. The gtk-engines schemas have been moved to a dedicated gtk-engines-schemas package. The armv7a with thumb package architecture suffix has changed. The suffix for these packages with the thumb optimization enabled is "t2" as it should be. Use of this suffix was not the case in the 1.5 release. Architecture names will change within package feeds as a result.

The following changes have been made to BitBake.

When fetching source from a Git repository using SRC_URI, BitBake will now validate the SRCREV value against the branch. You can specify the branch using the following form: SRC_URI = "git://server.name/repository;branch=branchname" If you do not specify a branch, BitBake looks in the default "master" branch. Alternatively, if you need to bypass this check (e.g. if you are fetching a revision corresponding to a tag that is not on any branch), you can add ";nobranch=1" to the end of the URL within SRC_URI.

BitBake had some previously deprecated Python definitions within its bb module removed. You should use their sub-module counterparts instead: bb.MalformedUrl: Use bb.fetch.MalformedUrl. bb.encodeurl: Use bb.fetch.encodeurl. bb.decodeurl: Use bb.fetch.decodeurl bb.mkdirhier: Use bb.utils.mkdirhier. bb.movefile: Use bb.utils.movefile. bb.copyfile: Use bb.utils.copyfile. bb.which: Use bb.utils.which. bb.vercmp_string: Use bb.utils.vercmp_string. bb.vercmp: Use bb.utils.vercmp.

The SVK fetcher has been removed from BitBake.

The BitBake console UI will now output errors to stderr instead of stdout. Consequently, if you are piping or redirecting the output of bitbake to somewhere else, and you wish to retain the errors, you will need to add 2>&1 (or something similar) to the end of your bitbake command line.

task-taskname overrides have been adjusted so that tasks whose names contain underscores have the underscores replaced by hyphens for the override so that they now function properly. For example, the task override for do_populate_sdk is task-populate-sdk.

The following variables have changed. For information on the OpenEmbedded build system variables, see the "Variables Glossary" Chapter.

TMPDIR can no longer be on an NFS mount. NFS does not offer full POSIX locking and inode consistency and can cause unexpected issues if used to store TMPDIR. The check for this occurs on startup. If TMPDIR is detected on an NFS mount, an error occurs.

The PRINC variable has been deprecated and triggers a warning if detected during a build. For PR increments on changes, use the PR service instead. You can find out more about this service in the "Working With a PR Service" section in the Yocto Project Development Tasks Manual.

The "sum.jffs2" option for IMAGE_TYPES has been replaced by the "jffs2.sum" option, which fits the processing order.

The COPY_LIC_MANIFEST variable must now be set to "1" rather than any value in order to enable it.

The COPY_LIC_DIRS variable must now be set to "1" rather than any value in order to enable it.

The PACKAGE_GROUP variable has been renamed to FEATURE_PACKAGES to more accurately reflect its purpose. You can still use PACKAGE_GROUP but the OpenEmbedded build system produces a warning message when it encounters the variable.

The following variables now expect a semicolon separated list of functions to call and not arbitrary shell commands: ROOTFS_PREPROCESS_COMMAND ROOTFS_POSTPROCESS_COMMAND SDK_POSTPROCESS_COMMAND POPULATE_SDK_POST_TARGET_COMMAND POPULATE_SDK_POST_HOST_COMMAND IMAGE_POSTPROCESS_COMMAND IMAGE_PREPROCESS_COMMAND ROOTFS_POSTUNINSTALL_COMMAND ROOTFS_POSTINSTALL_COMMAND For migration purposes, you can simply wrap shell commands in a shell function and then call the function. Here is an example: my_postprocess_function() { echo "hello" > ${IMAGE_ROOTFS}/hello.txt } ROOTFS_POSTPROCESS_COMMAND += "my_postprocess_function; "

Package Tests (ptest) are built but not installed by default. For information on using Package Tests, see the "Setting up and running package test (ptest)" section in the Yocto Project Development Tasks Manual. For information on the ptest class, see the "ptest.bbclass" section.

Separate build and source directories have been enabled by default for selected recipes where it is known to work (a whitelist) and for all recipes that inherit the cmake class. In future releases the autotools class will enable a separate build directory by default as well. Recipes building Autotools-based software that fails to build with a separate build directory should be changed to inherit from the autotools-brokensep class instead of the autotools or autotools_stageclasses.

qemu-native now builds without SDL-based graphical output support by default. The following additional lines are needed in your local.conf to enable it: PACKAGECONFIG_pn-qemu-native = "sdl" ASSUME_PROVIDED += "libsdl-native" The default local.conf contains these statements. Consequently, if you are building a headless system and using a default local.conf file, you will need comment these two lines out.

core-image-basic has been renamed to core-image-full-cmdline. In addition to core-image-basic being renamed, packagegroup-core-basic has been renamed to packagegroup-core-full-cmdline to match.

The top-level LICENSE file has been changed to better describe the license of the various components of OE-Core. However, the licensing itself remains unchanged. Normally, this change would not cause any side-effects. However, some recipes point to this file within LIC_FILES_CHKSUM (as ${COREBASE}/LICENSE) and thus the accompanying checksum must be changed from 3f40d7994397109285ec7b81fdeb3b58 to 4d92cd373abda3937c2bc47fbc49d690. A better alternative is to have LIC_FILES_CHKSUM point to a file describing the license that is distributed with the source that the recipe is building, if possible, rather than pointing to ${COREBASE}/LICENSE.

The "-fpermissive" option has been removed from the default CFLAGS value. You need to take action on individual recipes that fail when building with this option. You need to either patch the recipes to fix the issues reported by the compiler, or you need to add "-fpermissive" to CFLAGS in the recipes.

Custom image output types, as selected using IMAGE_FSTYPES, must declare their dependencies on other image types (if any) using a new IMAGE_TYPEDEP variable.

The do_package_write task has been removed. The task is no longer needed.

The default update-alternatives provider has been changed from opkg to opkg-utils. This change resolves some troublesome circular dependencies. The runtime package has also been renamed from update-alternatives-cworth to update-alternatives-opkg.

The virtclass overrides are now deprecated. Use the equivalent class overrides instead (e.g. virtclass-native becomes class-native.)

The following recipes have been removed: packagegroup-toolset-native - This recipe is largely unused. linux-yocto-3.8 - Support for the Linux yocto 3.8 kernel has been dropped. Support for the 3.10 and 3.14 kernels have been added with the linux-yocto-3.10 and linux-yocto-3.14 recipes. ocf-linux - This recipe has been functionally replaced using cryptodev-linux. genext2fs - genext2fs is no longer used by the build system and is unmaintained upstream. js - This provided an ancient version of Mozilla's javascript engine that is no longer needed. zaurusd - The recipe has been moved to the meta-handheld layer. eglibc 2.17 - Replaced by the eglibc 2.19 recipe. gcc 4.7.2 - Replaced by the now stable gcc 4.8.2. external-sourcery-toolchain - this recipe is now maintained in the meta-sourcery layer. linux-libc-headers-yocto 3.4+git - Now using version 3.10 of the linux-libc-headers by default. meta-toolchain-gmae - This recipe is obsolete. packagegroup-core-sdk-gmae - This recipe is obsolete. packagegroup-core-standalone-gmae-sdk-target - This recipe is obsolete.

The following classes have become obsolete and have been removed: module_strip pkg_metainfo pkg_distribute image-empty

The following reference BSPs changes occurred: The BeagleBoard (beagleboard) ARM reference hardware has been replaced by the BeagleBone (beaglebone) hardware. The RouterStation Pro (routerstationpro) MIPS reference hardware has been replaced by the EdgeRouter Lite (edgerouter) hardware. The previous reference BSPs for the beagleboard and routerstationpro machines are still available in a new meta-yocto-bsp-old layer in the Source Repositories at http://git.yoctoproject.org/cgit/cgit.cgi/meta-yocto-bsp-old/.

This section provides migration information for moving to the Yocto Project 1.7 Release from the prior release.

The QEMU recipe now uses a number of PACKAGECONFIG options to enable various optional features. The method used to set defaults for these options means that existing local.conf files will need to be be modified to append to PACKAGECONFIG for qemu-native and nativesdk-qemu instead of setting it. In other words, to enable graphical output for QEMU, you should now have these lines in local.conf: PACKAGECONFIG_append_pn-qemu-native = " sdl" PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"

The minimum Git version required on the build host is now 1.7.8 because the --list option is now required by BitBake's Git fetcher. As always, if your host distribution does not provide a version of Git that meets this requirement, you can use the buildtools-tarball that does. See the "Required Git, tar, and Python Versions" section for more information.

The following autotools class changes occurred: A separate build directory is now used by default: The autotools class has been changed to use a directory for building (B), which is separate from the source directory (S). This is commonly referred to as B != S, or an out-of-tree build. If the software being built is already capable of building in a directory separate from the source, you do not need to do anything. However, if the software is not capable of being built in this manner, you will need to either patch the software so that it can build separately, or you will need to change the recipe to inherit the autotools-brokensep class instead of the autotools or autotools_stage classes. The --foreign option is no longer passed to automake when running autoconf: This option tells automake that a particular software package does not follow the GNU standards and therefore should not be expected to distribute certain files such as ChangeLog, AUTHORS, and so forth. Because the majority of upstream software packages already tell automake to enable foreign mode themselves, the option is mostly superfluous. However, some recipes will need patches for this change. You can easily make the change by patching configure.ac so that it passes "foreign" to AM_INIT_AUTOMAKE(). See this commit for an example showing how to make the patch.

Some of the core recipes that package binary configuration scripts now disable the scripts due to the scripts previously requiring error-prone path substitution. Software that links against these libraries using these scripts should use the much more robust pkg-config instead. The list of recipes changed in this version (and their configuration scripts) is as follows: directfb (directfb-config) freetype (freetype-config) gpgme (gpgme-config) libassuan (libassuan-config) libcroco (croco-6.0-config) libgcrypt (libgcrypt-config) libgpg-error (gpg-error-config) libksba (ksba-config) libpcap (pcap-config) libpcre (pcre-config) libpng (libpng-config, libpng16-config) libsdl (sdl-config) libusb-compat (libusb-config) libxml2 (xml2-config) libxslt (xslt-config) ncurses (ncurses-config) neon (neon-config) npth (npth-config) pth (pth-config) taglib (taglib-config) Additionally, support for pkg-config has been added to some recipes in the previous list in the rare cases where the upstream software package does not already provide it.

Because eglibc and glibc were already fairly close, this replacement should not require any significant changes to other software that links to eglibc. However, there were a number of minor changes in glibc 2.20 upstream that could require patching some software (e.g. the removal of the _BSD_SOURCE feature test macro). glibc 2.20 requires version 2.6.32 or greater of the Linux kernel. Thus, older kernels will no longer be usable in conjunction with it. For full details on the changes in glibc 2.20, see the upstream release notes here.

The module_autoload_* variable is now deprecated and a new KERNEL_MODULE_AUTOLOAD variable should be used instead. Also, module_conf_* must now be used in conjunction with a new KERNEL_MODULE_PROBECONF variable. The new variables no longer require you to specify the module name as part of the variable name. This change not only simplifies usage but also allows the values of these variables to be appropriately incorporated into task signatures and thus trigger the appropriate tasks to re-execute when changed. You should replace any references to module_autoload_* with KERNEL_MODULE_AUTOLOAD, and add any modules for which module_conf_* is specified to KERNEL_MODULE_PROBECONF. For more information, see the KERNEL_MODULE_AUTOLOAD and KERNEL_MODULE_PROBECONF variables.

The following changes have occurred to the QA check process: Additional QA checks file-rdeps and build-deps have been added in order to verify that file dependencies are satisfied (e.g. package contains a script requiring /bin/bash) and build-time dependencies are declared, respectively. For more information, please see the "QA Error and Warning Messages" chapter. Package QA checks are now performed during a new do_package_qa task rather than being part of the do_package task. This allows more parallel execution. This change is unlikely to be an issue except for highly customized recipes that disable packaging tasks themselves by marking them as noexec. For those packages, you will need to disable the do_package_qa task as well. Files being overwritten during the do_populate_sysroot task now trigger an error instead of a warning. Recipes should not be overwriting files written to the sysroot by other recipes. If you have these types of recipes, you need to alter them so that they do not overwrite these files. You might now receive this error after changes in configuration or metadata resulting in orphaned files being left in the sysroot. If you do receive this error, the way to resolve the issue is to delete your TMPDIR or to move it out of the way and then re-start the build. Anything that has been fully built up to that point and does not need rebuilding will be restored from the shared state cache and the rest of the build will be able to proceed as normal.

The following recipes have been removed: x-load: This recipe has been superseded by U-boot SPL for all Cortex-based TI SoCs. For legacy boards, the meta-ti layer, which contains a maintained recipe, should be used instead. ubootchart: This recipe is obsolete. A bootchart2 recipe has been added to functionally replace it. linux-yocto 3.4: Support for the linux-yocto 3.4 kernel has been dropped. Support for the 3.10 and 3.14 kernels remains, while support for version 3.17 has been added. eglibc has been removed in favor of glibc. See the "eglibc 2.19 Replaced with glibc 2.20" section for more information.

The following miscellaneous change occurred: The build history feature now writes build-id.txt instead of build-id. Additionally, build-id.txt now contains the full build header as printed by BitBake upon starting the build. You should manually remove old "build-id" files from your existing build history repositories to avoid confusion. For information on the build history feature, see the "Maintaining Build Output Quality" section in the Yocto Project Development Tasks Manual.

This section provides migration information for moving to the Yocto Project 1.8 Release from the prior release.

The following recipes have been removed: owl-video: Functionality replaced by gst-player. gaku: Functionality replaced by gst-player. gnome-desktop: This recipe is now available in meta-gnome and is no longer needed. gsettings-desktop-schemas: This recipe is now available in meta-gnome and is no longer needed. python-argparse: The argparse module is already provided in the default Python distribution in a package named python-argparse. Consequently, the separate python-argparse recipe is no longer needed. telepathy-python, libtelepathy, telepathy-glib, telepathy-idle, telepathy-mission-control: All these recipes have moved to meta-oe and are consequently no longer needed by any recipes in OpenEmbedded-Core. linux-yocto_3.10 and linux-yocto_3.17: Support for the linux-yocto 3.10 and 3.17 kernels has been dropped. Support for the 3.14 kernel remains, while support for 3.19 kernel has been added. poky-feed-config-opkg: This recipe has become obsolete and is no longer needed. Use distro-feed-config from meta-oe instead. libav 0.8.x: libav 9.x is now used. sed-native: No longer needed. A working version of sed is expected to be provided by the host distribution.

Proper built-in support for selecting BlueZ 5.x in preference to the default of 4.x now exists. To use BlueZ 5.x, simply add "bluez5" to your DISTRO_FEATURES value. If you had previously added append files (*.bbappend) to make this selection, you can now remove them. Additionally, a bluetooth class has been added to make selection of the appropriate bluetooth support within a recipe a little easier. If you wish to make use of this class in a recipe, add something such as the following: inherit bluetooth PACKAGECONFIG ??= "${@bb.utils.contains('DISTRO_FEATURES', 'bluetooth', '${BLUEZ}', '', d)} PACKAGECONFIG[bluez4] = "--enable-bluetooth,--disable-bluetooth,bluez4" PACKAGECONFIG[bluez5] = "--enable-bluez5,--disable-bluez5,bluez5"

The kernel build process was changed to place the source in a common shared work area and to place build artifacts separately in the source code tree. In theory, migration paths have been provided for most common usages in kernel recipes but this might not work in all cases. In particular, users need to ensure that ${S} (source files) and ${B} (build artifacts) are used correctly in functions such as do_configure and do_install. For kernel recipes that do not inherit from kernel-yocto or include linux-yocto.inc, you might wish to refer to the linux.inc file in the meta-oe layer for the kinds of changes you need to make. For reference, here is the commit where the linux.inc file in meta-oe was updated. Recipes that rely on the kernel source code and do not inherit the module classes might need to add explicit dependencies on the do_shared_workdir kernel task, for example: do_configure[depends] += "virtual/kernel:do_shared_workdir"

SSL 3.0 is now disabled when building OpenSSL. Disabling SSL 3.0 avoids any lingering instances of the POODLE vulnerability. If you feel you must re-enable SSL 3.0, then you can add an append file (*.bbappend) for the openssl recipe to remove "-no-ssl3" from EXTRA_OECONF.

gcc's default sysroot and include directories are now "poisoned". In other words, the sysroot and include directories are being redirected to a non-existent location in order to catch when host directories are being used due to the correct options not being passed. This poisoning applies both to the cross-compiler used within the build and to the cross-compiler produced in the SDK. If this change causes something in the build to fail, it almost certainly means the various compiler flags and commands are not being passed correctly to the underlying piece of software. In such cases, you need to take corrective steps.

Changes have been made to the base, autotools, and cmake classes to clean out generated files when the do_configure task needs to be re-executed. One of the improvements is to attempt to run "make clean" during the do_configure task if a Makefile exists. Some software packages do not provide a working clean target within their make files. If you have such recipes, you need to set CLEANBROKEN to "1" within the recipe, for example: CLEANBROKEN = "1"

The following QA Check and Validation Changes have occurred: Usage of PRINC previously triggered a warning. It now triggers an error. You should remove any remaining usage of PRINC in any recipe or append file. An additional QA check has been added to detect usage of ${D} in FILES values where D values should not be used at all. The same check ensures that $D is used in pkg_preinst/pkg_postinst/pkg_prerm/pkg_postrm functions instead of ${D}. S now needs to be set to a valid value within a recipe. If S is not set in the recipe, the directory is not automatically created. If S does not point to a directory that exists at the time the do_unpack task finishes, a warning will be shown. LICENSE is now validated for correct formatting of multiple licenses. If the format is invalid (e.g. multiple licenses are specified with no operators to specify how the multiple licenses interact), then a warning will be shown.

The following miscellaneous changes have occurred: The send-error-report script now expects a "-s" option to be specified before the server address. This assumes a server address is being specified. The oe-pkgdata-util script now expects a "-p" option to be specified before the pkgdata directory, which is now optional. If the pkgdata directory is not specified, the script will run BitBake to query PKGDATA_DIR from the build environment.

This section provides migration information for moving to the Yocto Project 2.0 Release from the prior release.

The default compiler is now GCC 5.2. This change has required fixes for compilation errors in a number of other recipes. One important example is a fix for when the Linux kernel freezes at boot time on ARM when built with GCC 5. If you are using your own kernel recipe or source tree and building for ARM, you will likely need to apply this patch. The standard linux-yocto kernel source tree already has a workaround for the same issue. For further details, see and the porting guide at . Alternatively, you can switch back to GCC 4.9 or 4.8 by setting GCCVERSION in your configuration, as follows: GCCVERSION = "4.9%"

Gstreamer 0.10 has been removed in favor of Gstreamer 1.x. As part of the change, recipes for Gstreamer 0.10 and related software are now located in meta-multimedia. This change results in Qt4 having Phonon and Gstreamer support in QtWebkit disabled by default.

The following recipes have been moved or removed: bluez4: The recipe is obsolete and has been moved due to bluez5 becoming fully integrated. The bluez4 recipe now resides in meta-oe. gamin: The recipe is obsolete and has been removed. gnome-icon-theme: The recipe's functionally has been replaced by adwaita-icon-theme. Gstreamer 0.10 Recipes: Recipes for Gstreamer 0.10 have been removed in favor of the recipes for Gstreamer 1.x. insserv: The recipe is obsolete and has been removed. libunique: The recipe is no longer used and has been moved to meta-oe. midori: The recipe's functionally has been replaced by epiphany. python-gst: The recipe is obsolete and has been removed since it only contains bindings for Gstreamer 0.10. qt-mobility: The recipe is obsolete and has been removed since it requires Gstreamer 0.10, which has been replaced. subversion: All 1.6.x versions of this recipe have been removed. webkit-gtk: The older 1.8.3 version of this recipe has been removed in favor of webkitgtk.

The method by which BitBake's datastore handles overrides has changed. Overrides are now applied dynamically and bb.data.update_data() is now a no-op. Thus, bb.data.update_data() is no longer required in order to apply the correct overrides. In practice, this change is unlikely to require any changes to Metadata. However, these minor changes in behavior exist: All potential overrides are now visible in the variable history as seen when you run the following: $ bitbake -e d.delVar('VARNAME') and d.setVar('VARNAME', None) result in the variable and all of its overrides being cleared out. Before the change, only the non-overridden values were cleared.

The shell versions of the BitBake message functions (i.e. bbdebug, bbnote, bbwarn, bbplain, bberror, and bbfatal) are now connected through to their BitBake equivalents bb.debug(), bb.note(), bb.warn(), bb.plain(), bb.error(), and bb.fatal(), respectively. Thus, those message functions that you would expect to be printed by the BitBake UI are now actually printed. In practice, this change means two things: If you now see messages on the console that you did not previously see as a result of this change, you might need to clean up the calls to bbwarn, bberror, and so forth. Or, you might want to simply remove the calls. The bbfatal message function now suppresses the full error log in the UI, which means any calls to bbfatal where you still wish to see the full error log should be replaced by die or bbfatal_log.

The following recipes have had extra dev/dbg packages removed: acl apmd aspell attr augeas bzip2 cogl curl elfutils gcc-target libgcc libtool libxmu opkg pciutils rpm sysfsutils tiff xz All of the above recipes now conform to the standard packaging scheme where a single -dev, -dbg, and -staticdev package exists per recipe.

Maintenance tracking data for recipes that was previously part of meta-yocto has been moved to OE-Core. The change includes package_regex.inc and distro_alias.inc, which are typically enabled when using the distrodata class. Additionally, the contents of upstream_tracking.inc has now been split out to the relevant recipes.

Stale files from recipes that no longer exist in the current configuration are now automatically removed from sysroot as well as removed from any other place managed by shared state. This automatic cleanup means that the build system now properly handles situations such as renaming the build system side of recipes, removal of layers from bblayers.conf, and DISTRO_FEATURES changes. Additionally, work directories for old versions of recipes are now pruned. If you wish to disable pruning old work directories, you can set the following variable in your configuration: SSTATE_PRUNE_OBSOLETEWORKDIR = "0"

The linux-yocto tree has up to now been a combined set of kernel changes and configuration (meta) data carried in a single tree. While this format is effective at keeping kernel configuration and source modifications synchronized, it is not always obvious to developers how to manipulate the Metadata as compared to the source. Metadata processing has now been removed from the kernel-yocto class and the external Metadata repository yocto-kernel-cache, which has always been used to seed the linux-yocto "meta" branch. This separate linux-yocto cache repository is now the primary location for this data. Due to this change, linux-yocto is no longer able to process combined trees. Thus, if you need to have your own combined kernel repository, you must do the split there as well and update your recipes accordingly. See the meta/recipes-kernel/linux/linux-yocto_4.1.bb recipe for an example.

The following QA checks have been added: Added a "host-user-contaminated" check for ownership issues for packaged files outside of /home. The check looks for files that are incorrectly owned by the user that ran BitBake instead of owned by a valid user in the target system. Added an "invalid-chars" check for invalid (non-UTF8) characters in recipe metadata variable values (i.e. DESCRIPTION, SUMMARY, LICENSE, and SECTION). Some package managers do not support these characters. Added an "invalid-packageconfig" check for any options specified in PACKAGECONFIG that do not match any PACKAGECONFIG option defined for the recipe.

These additional changes exist: gtk-update-icon-cache has been renamed to gtk-icon-utils. The tools-profile IMAGE_FEATURES item as well as its corresponding packagegroup and packagegroup-core-tools-profile no longer bring in oprofile. Bringing in oprofile was originally added to aid compilation on resource-constrained targets. However, this aid has not been widely used and is not likely to be used going forward due to the more powerful target platforms and the existence of better cross-compilation tools. The IMAGE_FSTYPES variable's default value now specifies ext4 instead of ext3. All support for the PRINC variable has been removed. The packagegroup-core-full-cmdline packagegroup no longer brings in lighttpd due to the fact that bringing in lighttpd is not really in line with the packagegroup's purpose, which is to add full versions of command-line tools that by default are provided by busybox.

This section provides migration information for moving to the Yocto Project 2.1 Release from the prior release.

Variable expressions, such as ${VARNAME} no longer expand automatically within Python functions. Suppressing expansion was done to allow Python functions to construct shell scripts or other code for situations in which you do not want such expressions expanded. For any existing code that relies on these expansions, you need to change the expansions to expand the value of individual variables through d.getVar(). To alternatively expand more complex expressions, use d.expand().

The convention for overrides has always been for them to be lower-case characters. This practice is now a requirement as BitBake's datastore now assumes lower-case characters in order to give a slight performance boost during parsing. In practical terms, this requirement means that anything that ends up in OVERRIDES must now appear in lower-case characters (e.g. values for MACHINE, TARGET_ARCH, DISTRO, and also recipe names if _pn-recipename overrides are to be effective).

The expand parameter to getVar() and getVarFlag() previously defaulted to False if not specified. Now, however, no default exists so one must be specified. You must change any getVar() calls that do not specify the final expand parameter to calls that do specify the parameter. You can run the following sed command at the base of a layer to make this change: sed -e 's:\(\.getVar([^,()]*\)):\1, False):g' -i `grep -ril getVar *` sed -e 's:\(\.getVarFlag([^,()]*, [^,()]*\)):\1, False):g' -i `grep -ril getVarFlag *` The reason for this change is that it prepares the way for changing the default to True in a future Yocto Project release. This future change is a much more sensible default than False. However, the change needs to be made gradually as a sudden change of the default would potentially cause side-effects that would be difficult to detect.

EXTRA_OEMAKE now defaults to "" instead of "-e MAKEFLAGS=". Setting EXTRA_OEMAKE to "-e MAKEFLAGS=" by default was a historical accident that has required many classes (e.g. autotools, module) and recipes to override this default in order to work with sensible build systems. When upgrading to the release, you must edit any recipe that relies upon this old default by either setting EXTRA_OEMAKE back to "-e MAKEFLAGS=" or by explicitly setting any required variable value overrides using EXTRA_OEMAKE, which is typically only needed when a Makefile sets a default value for a variable that is inappropriate for cross-compilation using the "=" operator rather than the "?=" operator.

The use of ${libdir}/${BPN} as libexecdir is different as compared to all other mainstream distributions, which either uses ${prefix}/libexec or ${libdir}. The use is also contrary to the GNU Coding Standards (i.e. ) that suggest ${prefix}/libexec and also notes that any package-specific nesting should be done by the package itself. Finally, having libexecdir change between recipes makes it very difficult for different recipes to invoke binaries that have been installed into libexecdir. The Filesystem Hierarchy Standard (i.e. ) now recognizes the use of ${prefix}/libexec/, giving distributions the choice between ${prefix}/lib or ${prefix}/libexec without breaking FHS.

For recipes inheriting the autotools class, ac_cv_sizeof_off_t is no longer cached in the site files for autoconf. The reason for this change is because the ac_cv_sizeof_off_t value is not necessarily static per architecture as was previously assumed. Rather, the value changes based on whether large file support is enabled. For most software that uses autoconf, this change should not be a problem. However, if you have a recipe that bypasses the standard do_configure task from the autotools class and the software the recipe is building uses a very old version of autoconf, the recipe might be incapable of determining the correct size of off_t during do_configure. The best course of action is to patch the software as necessary to allow the default implementation from the autotools class to work such that autoreconf succeeds and produces a working configure script, and to remove the overridden do_configure task such that the default implementation does get used.

Previously, for image recipes the do_rootfs task assembled the filesystem and then from that filesystem generated images. With this Yocto Project release, image generation is split into separate do_image_* tasks for clarity both in operation and in the code. For most cases, this change does not present any problems. However, if you have made customizations that directly modify the do_rootfs task or that mention do_rootfs, you might need to update those changes. In particular, if you had added any tasks after do_rootfs, you should make edits so that those tasks are after the do_image_complete task rather than after do_rootfs so that the your added tasks run at the correct time. A minor part of this restructuring is that the post-processing definitions and functions have been moved from the image class to the rootfs-postcommands class. Functionally, however, they remain unchanged.

The following recipes have been removed in the 2.1 release: gcc version 4.8: Versions 4.9 and 5.3 remain. qt4: All support for Qt 4.x has been moved out to a separate meta-qt4 layer because Qt 4 is no longer supported upstream. x11vnc: Moved to the meta-oe layer. linux-yocto-3.14: No longer supported. linux-yocto-3.19: No longer supported. libjpeg: Replaced by the libjpeg-turbo recipe. pth: Became obsolete. liboil: Recipe is no longer needed and has been moved to the meta-multimedia layer. gtk-theme-torturer: Recipe is no longer needed and has been moved to the meta-gnome layer. gnome-mime-data: Recipe is no longer needed and has been moved to the meta-gnome layer. udev: Replaced by the eudev recipe for compatibility when using sysvinit with newer kernels. python-pygtk: Recipe became obsolete. adt-installer: Recipe became obsolete. See the "ADT Removed" section for more information.

The following classes have changed: autotools_stage: Removed because the autotools class now provides its functionality. Recipes that inherited from autotools_stage should now inherit from autotools instead. boot-directdisk: Merged into the image-vm class. The boot-directdisk class was rarely directly used. Consequently, this change should not cause any issues. bootimg: Merged into the image-live class. The bootimg class was rarely directly used. Consequently, this change should not cause any issues. packageinfo: Removed due to its limited use by the Hob UI, which has itself been removed.

The following changes have been made to the build system user interface: Hob GTK+-based UI: Removed because it is unmaintained and based on the outdated GTK+ 2 library. The Toaster web-based UI is much more capable and is actively maintained. See the "Using the Toaster Web Interface" section in the Yocto Project Toaster User Manual for more information on this interface. "puccho" BitBake UI: Removed because is unmaintained and no longer useful.

The Application Development Toolkit (ADT) has been removed because its functionality almost completely overlapped with the standard SDK and the extensible SDK. For information on these SDKs and how to build and use them, see the Yocto Project Software Development Kit (SDK) Developer's Guide. The Yocto Project Eclipse IDE Plug-in is still supported and is not affected by this change.

The following changes have been made for the Poky distribution: The meta-yocto layer has been renamed to meta-poky to better match its purpose, which is to provide the Poky reference distribution. The meta-yocto-bsp layer retains its original name since it provides reference machines for the Yocto Project and it is otherwise unrelated to Poky. References to meta-yocto in your conf/bblayers.conf should automatically be updated, so you should not need to change anything unless you are relying on this naming elsewhere. The uninative class is now enabled by default in Poky. This class attempts to isolate the build system from the host distribution's C library and makes re-use of native shared state artifacts across different host distributions practical. With this class enabled, a tarball containing a pre-built C library is downloaded at the start of the build. The uninative class is enabled through the meta/conf/distro/include/yocto-uninative.inc file, which for those not using the Poky distribution, can include to easily enable the same functionality. Alternatively, if you wish to build your own uninative tarball, you can do so by building the uninative-tarball recipe, making it available to your build machines (e.g. over HTTP/HTTPS) and setting a similar configuration as the one set by yocto-uninative.inc. Static library generation, for most cases, is now disabled by default in the Poky distribution. Disabling this generation saves some build time as well as the size used for build output artifacts. Disabling this library generation is accomplished through a meta/conf/distro/include/no-static-libs.inc, which for those not using the Poky distribution can easily include to enable the same functionality. Any recipe that needs to opt-out of having the "--disable-static" option specified on the configure command line either because it is not a supported option for the configure script or because static libraries are needed should set the following variable: DISABLE_STATIC = "" The separate poky-tiny distribution now uses the musl C library instead of a heavily pared down glibc. Using musl results in a smaller distribution and facilitates much greater maintainability because musl is designed to have a small footprint. If you have used poky-tiny and have customized the glibc configuration you will need to redo those customizations with musl when upgrading to the new release.

The following changes have been made to packaging: The runuser and mountpoint binaries, which were previously in the main util-linux package, have been split out into the util-linux-runuser and util-linux-mountpoint packages, respectively. The python-elementtree package has been merged into the python-xml package.

The following changes have been made to the tuning files: The "no-thumb-interwork" tuning feature has been dropped from the ARM tune include files. Because interworking is required for ARM EABI, attempting to disable it through a tuning feature no longer makes sense. Support for ARM OABI was deprecated in gcc 4.7. The tune-cortexm*.inc and tune-cortexr4.inc files have been removed because they are poorly tested. Until the OpenEmbedded build system officially gains support for CPUs without an MMU, these tuning files would probably be better maintained in a separate layer if needed.

This release supports generation of GLib Introspective Repository (GIR) files through GObject introspection, which is the standard mechanism for accessing GObject-based software from runtime environments. You can enable, disable, and test the generation of this data. See the "Enabling GObject Introspection Support" section in the Yocto Project Development Tasks Manual for more information.

These additional changes exist: The minimum Git version has been increased to 1.8.3.1. If your host distribution does not provide a sufficiently recent version, you can install the buildtools, which will provide it. See the "Required Git, tar, and Python Versions" section for more information on the buildtools tarball. The buggy and incomplete support for the RPM version 4 package manager has been removed. The well-tested and maintained support for RPM version 5 remains. Previously, the following list of packages were removed if package-management was not in IMAGE_FEATURES, regardless of any dependencies: update-rc.d base-passwd shadow update-alternatives run-postinsts With the Yocto Project 2.1 release, these packages are only removed if "read-only-rootfs" is in IMAGE_FEATURES, since they might still be needed for a read-write image even in the absence of a package manager (e.g. if users need to be added, modified, or removed at runtime). The devtool modify command now defaults to extracting the source since that is most commonly expected. The "-x" or "--extract" options are now no-ops. If you wish to provide your own existing source tree, you will now need to specify either the "-n" or "--no-extract" options when running devtool modify. If the formfactor for a machine is either not supplied or does not specify whether a keyboard is attached, then the default is to assume a keyboard is attached rather than assume no keyboard. This change primarily affects the Sato UI. The .debug directory packaging is now automatic. If your recipe builds software that installs binaries into directories other than the standard ones, you no longer need to take care of setting FILES_${PN}-dbg to pick up the resulting .debug directories as these directories are automatically found and added. Inaccurate disk and CPU percentage data has been dropped from buildstats output. This data has been replaced with getrusage() data and corrected IO statistics. You will probably need to update any custom code that reads the buildstats data. The meta/conf/distro/include/package_regex.inc is now deprecated. The contents of this file have been moved to individual recipes. Because this file will likely be removed in a future Yocto Project release, it is suggested that you remove any references to the file that might be in your configuration. The v86d/uvesafb has been removed from the genericx86 and genericx86-64 reference machines, which are provided by the meta-yocto-bsp layer. Most modern x86 boards do not rely on this file and it only adds kernel error messages during startup. If you do still need to support uvesafb, you can simply add v86d to your image. Build sysroot paths are now removed from debug symbol files. Removing these paths means that remote GDB using an unstripped build system sysroot will no longer work (although this was never documented to work). The supported method to accomplish something similar is to set IMAGE_GEN_DEBUGFS to "1", which will generate a companion debug image containing unstripped binaries and associated debug sources alongside the image.

This section provides migration information for moving to the Yocto Project 2.2 Release from the prior release.

The minimum kernel version for the target system and for SDK is now 3.2.0, due to the upgrade to glibc 2.24. Specifically, for AArch64-based targets the version is 3.14. For Nios II-based targets, the minimum kernel version is 3.19. For x86 and x86_64, you can reset OLDEST_KERNEL to anything down to 2.6.32 if desired.

The way directories are staged in sysroot has been simplified and introduces the new SYSROOT_DIRS, SYSROOT_DIRS_NATIVE, and SYSROOT_DIRS_BLACKLIST. See the v2 patch series on the OE-Core Mailing List for additional information.

Removal of old images and other files in tmp/deploy/ is now enabled by default due to a new staging method used for those files. As a result of this change, the RM_OLD_IMAGE variable is now redundant.

The following changes for Python occurred:

BitBake requires Python 3.4 or greater.

A UTF-8 locale is required on the build host due to Python 3. Since C.UTF-8 is not a standard, the default is en_US.UTF-8.

The metadata is now required to use Python 3 syntax. For help preparing metadata, see any of the many Python 3 porting guides available. Alternatively, you can reference the conversion commits for Bitbake and you can use OE-Core as a guide for changes. Following are particular areas of interest: * subprocess command-line pipes needing locale decoding * the syntax for octal values changed * the iter*() functions changed name * iterators now return views, not lists * changed names for Python modules

Most target Python recipes have now been switched to Python 3. Unfortunately, systems using RPM as a package manager and providing online package-manager support through SMART still require Python 2. Python 2 and recipes that use it can still be built for the target as with previous versions.

buildtools-tarball now includes Python 3.

uClibc has been removed in favor of musl. Musl has matured, is better maintained, and is compatible with a wider range of applications as compared to uClibc.

${B} is no longer the default working directory for tasks. Consequently, any custom tasks you define now need to either have the [dirs] flag set, or the task needs to change into the appropriate working directory manually (e.g using cd for a shell task). The preferred method is to use the [dirs] flag.

runqemu has been ported to Python and has changed behavior in some cases. Previous usage patterns continue to be supported. The new runqemu is a Python script. Machine knowledge is no longer hardcoded into runqemu. You can choose to use the qemuboot configuration file to define the BSP's own arguments and to make it bootable with runqemu. If you use a configuration file, use the following form: image-name-machine.qemuboot.conf The configuration file enables fine-grained tuning of options passed to QEMU without the runqemu script hard-coding any knowledge about different machines. Using a configuration file is particularly convenient when trying to use QEMU with machines other than the qemu* machines in OE-Core. The qemuboot.conf file is generated by the qemuboot class when the root filesystem is being build (i.e. build rootfs). QEMU boot arguments can be set in BSP's configuration file and the qemuboot class will save them to qemuboot.conf. If you want to use runqemu without a configuration file, use the following command form: $ runqemu machine rootfs kernel [options] Supported machines are as follows: qemuarm qemuarm64 qemux86 qemux86-64 qemuppc qemumips qemumips64 qemumipsel qemumips64el Consider the following example, which uses the qemux86-64 machine, provides a root filesystem, provides an image, and uses the nographic option: $ runqemu qemux86-64 tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.ext4 tmp/deploy/images/qemux86-64/bzImage nographic Following is a list of variables that can be set in configuration files such as bsp.conf to enable the BSP to be booted by runqemu: "QB" means "QEMU Boot". QB_SYSTEM_NAME: QEMU name (e.g. "qemu-system-i386") QB_OPT_APPEND: Options to append to QEMU (e.g. "-show-cursor") QB_DEFAULT_KERNEL: Default kernel to boot (e.g. "bzImage") QB_DEFAULT_FSTYPE: Default FSTYPE to boot (e.g. "ext4") QB_MEM: Memory (e.g. "-m 512") QB_MACHINE: QEMU machine (e.g. "-machine virt") QB_CPU: QEMU cpu (e.g. "-cpu qemu32") QB_CPU_KVM: Similar to QB_CPU except used for kvm support (e.g. "-cpu kvm64") QB_KERNEL_CMDLINE_APPEND: Options to append to the kernel's -append option (e.g. "console=ttyS0 console=tty") QB_DTB: QEMU dtb name QB_AUDIO_DRV: QEMU audio driver (e.g. "alsa", set it when support audio) QB_AUDIO_OPT: QEMU audio option (e.g. "-soundhw ac97,es1370"), which is used when QB_AUDIO_DRV is set. QB_KERNEL_ROOT: Kernel's root (e.g. /dev/vda) QB_TAP_OPT: Network option for 'tap' mode (e.g. "-netdev tap,id=net0,ifname=@TAP@,script=no,downscript=no -device virtio-net-device,netdev=net0"). runqemu will replace "@TAP@" with the one that is used, such as tap0, tap1 ... QB_SLIRP_OPT: Network option for SLIRP mode (e.g. "-netdev user,id=net0 -device virtio-net-device,netdev=net0") QB_ROOTFS_OPT: Used as rootfs (e.g. "-drive id=disk0,file=@ROOTFS@,if=none,format=raw -device virtio-blk-device,drive=disk0"). runqemu will replace "@ROOTFS@" with the one which is used, such as core-image-minimal-qemuarm64.ext4. QB_SERIAL_OPT: Serial port (e.g. "-serial mon:stdio") QB_TCPSERIAL_OPT: tcp serial port option (e.g. " -device virtio-serial-device -chardev socket,id=virtcon,port=@PORT@,host=127.0.0.1 -device virtconsole,chardev=virtcon" runqemu will replace "@PORT@" with the port number which is used. To use runqemu, set IMAGE_CLASSES as follows and run runqemu: For command-line syntax, use runqemu help. IMAGE_CLASSES += "qemuboot"

The default linker hash style for gcc-cross is now "sysv" in order to catch recipes that are building software without using the OpenEmbedded LDFLAGS. This change could result in seeing some "No GNU_HASH in the elf binary" QA issues when building such recipes. You need to fix these recipes so that they use the expected LDFLAGS. Depending on how the software is built, the build system used by the software (e.g. a Makefile) might need to be patched. However, sometimes making this fix is as simple as adding the following to the recipe: TARGET_CC_ARCH += "${LDFLAGS}"

The KERNEL_IMAGE_BASE_NAME variable no longer uses the KERNEL_IMAGETYPE variable to create the image's base name. Because the OpenEmbedded build system can now build multiple kernel image types, this part of the kernel image base name as been removed leaving only the following: KERNEL_IMAGE_BASE_NAME ?= "${PKGE}-${PKGV}-${PKGR}-${MACHINE}-${DATETIME} If you have recipes or classes that use KERNEL_IMAGE_BASE_NAME directly, you might need to update the references to ensure they continue to work.

The following changes took place for BitBake: The "goggle" UI and standalone image-writer tool have been removed as they both require GTK+ 2.0 and were not being maintained. The Perforce fetcher now supports SRCREV for specifying the source revision to use, be it ${AUTOREV}, changelist number, p4date, or label, in preference to separate SRC_URI parameters to specify these. This change is more in-line with how the other fetchers work for source control systems. Recipes that fetch from Perforce will need to be updated to use SRCREV in place of specifying the source revision within SRC_URI. Some of BitBake's internal code structures for accessing the recipe cache needed to be changed to support the new multi-configuration functionality. These changes will affect external tools that use BitBake's tinfoil module. For information on these changes, see the changes made to the scripts supplied with OpenEmbedded-Core: 1 and 2. The task management code has been rewritten to avoid using ID indirection in order to improve performance. This change is unlikely to cause any problems for most users. However, the setscene verification function as pointed to by BB_SETSCENE_VERIFY_FUNCTION needed to change signature. Consequently, a new variable named BB_SETSCENE_VERIFY_FUNCTION2 has been added allowing multiple versions of BitBake to work with suitably written metadata, which includes OpenEmbedded-Core and Poky. Anyone with custom BitBake task scheduler code might also need to update the code to handle the new structure.

Swabber, a tool that was intended to detect host contamination in the build process, has been removed, as it has been unmaintained and unused for some time and was never particularly effective. The OpenEmbedded build system has since incorporated a number of mechanisms including enhanced QA checks that mean that there is less of a need for such a tool.

The following recipes have been removed: augeas: No longer needed and has been moved to meta-oe. directfb: Unmaintained and has been moved to meta-oe. gcc: Removed 4.9 version. Versions 5.4 and 6.2 are still present. gnome-doc-utils: No longer needed. gtk-doc-stub: Replaced by gtk-doc. gtk-engines: No longer needed and has been moved to meta-gnome. gtk-sato-engine: Became obsolete. libglade: No longer needed and has been moved to meta-oe. libmad: Unmaintained and functionally replaced by libmpg123. libmad has been moved to meta-oe. libowl: Became obsolete. libxsettings-client: No longer needed. oh-puzzles: Functionally replaced by puzzles. oprofileui: Became obsolete. OProfile has been largely supplanted by perf. packagegroup-core-directfb.bb: Removed. core-image-directfb.bb: Removed. pointercal: No longer needed and has been moved to meta-oe. python-imaging: No longer needed and moved to meta-python python-pyrex: No longer needed and moved to meta-python. sato-icon-theme: Became obsolete. swabber-native: Swabber has been removed. See the entry on Swabber. tslib: No longer needed and has been moved to meta-oe. uclibc: Removed in favor of musl. xtscal: No longer needed and moved to meta-oe

The following classes have been removed: distutils-native-base: No longer needed. distutils3-native-base: No longer needed. sdl: Only set DEPENDS and SECTION, which are better set within the recipe instead. sip: Mostly unused. swabber: See the entry on Swabber.

The following minor packaging changes have occurred: grub: Split grub-editenv into its own package. systemd: Split container and vm related units into a new package, systemd-container. util-linux: Moved prlimit to a separate util-linux-prlimit package.

The following miscellaneous changes have occurred: package_regex.inc: Removed because the definitions package_regex.inc previously contained have been moved to their respective recipes. Both devtool add and recipetool create now use a fixed SRCREV by default when fetching from a Git repository. You can override this in either case to use ${AUTOREV} instead by using the -a or ‐‐autorev command-line option distcc: GTK+ UI is now disabled by default. packagegroup-core-tools-testapps: Removed Piglit. image.bbclass: Renamed COMPRESS(ION) to CONVERSION. This change means that COMPRESSIONTYPES, COMPRESS_DEPENDS and COMPRESS_CMD are deprecated in favor of CONVERSIONTYPES, CONVERSION_DEPENDS and CONVERSION_CMD. The COMPRESS* variable names will still work in the 2.2 release but metadata that does not need to be backwards-compatible should be changed to use the new names as the COMPRESS* ones will be removed in a future release. gtk-doc: A full version of gtk-doc is now made available. However, some old software might not be capable of using the current version of gtk-doc to build documentation. You need to change recipes that build such software so that they explicitly disable building documentation with gtk-doc.

This section provides migration information for moving to the Yocto Project 2.3 Release from the prior release.

The OpenEmbedded build system now uses one sysroot per recipe to resolve long-standing issues with configuration script auto-detection of undeclared dependencies. Consequently, you might find that some of your previously written custom recipes are missing declared dependencies, particularly those dependencies that are incidentally built earlier in a typical build process and thus are already likely to be present in the shared sysroot in previous releases. Consider the following: Declare Build-Time Dependencies: Because of this new feature, you must explicitly declare all build-time dependencies for your recipe. If you do not declare these dependencies, they are not populated into the sysroot for the recipe. Specify Pre-Installation and Post-Installation Native Tool Dependencies: You must specifically specify any special native tool dependencies of pkg_preinst and pkg_postinst scripts by using the PACKAGE_WRITE_DEPS variable. Specifying these dependencies ensures that these tools are available if these scripts need to be run on the build host during the do_rootfs task. As an example, see the dbus recipe. You will see that this recipe has a pkg_postinst that calls systemctl if "systemd" is in DISTRO_FEATURES. In the example, systemd-systemctl-native is added to PACKAGE_WRITE_DEPS, which is also conditional on "systemd" being in DISTRO_FEATURES. Examine Recipes that Use SSTATEPOSTINSTFUNCS: You need to examine any recipe that uses SSTATEPOSTINSTFUNCS and determine steps to take. Functions added to SSTATEPOSTINSTFUNCS are still called as they were in previous Yocto Project releases. However, since a separate sysroot is now being populated for every recipe and if existing functions being called through SSTATEPOSTINSTFUNCS are doing relocation, then you will need to change these to use a post-installation script that is installed by a function added to SYSROOT_PREPROCESS_FUNCS. For an example, see the pixbufcache class in meta/classes/ in the Yocto Project Source Repositories. The SSTATEPOSTINSTFUNCS variable itself is now deprecated in favor of the do_populate_sysroot[postfuncs] task. Consequently, if you do still have any function or functions that need to be called after the sysroot component is created for a recipe, then you would be well advised to take steps to use a post installation script as described previously. Taking these steps prepares your code for when SSTATEPOSTINSTFUNCS is removed in a future Yocto Project release. Specify the Sysroot when Using Certain External Scripts: Because the shared sysroot is now gone, the scripts oe-find-native-sysroot and oe-run-native have been changed such that you need to specify which recipe's STAGING_DIR_NATIVE is used. You can find more information on how recipe-specific sysroots work in the "staging.bbclass" section.

Within the environment used to run build tasks, the environment variable PATH is now sanitized such that the normal native binary paths (/bin, /sbin, /usr/bin and so forth) are removed and a directory containing symbolic links linking only to the binaries from the host mentioned in the HOSTTOOLS and HOSTTOOLS_NONFATAL variables is added to PATH. Consequently, any native binaries provided by the host that you need to call needs to be in one of these two variables at the configuration level. Alternatively, you can add a native recipe (i.e. -native) that provides the binary to the recipe's DEPENDS value. PATH is not sanitized in the same way within devshell. If it were, you would have difficulty running host tools for development and debugging within the shell.

The following changes to scripts took place: oe-find-native-sysroot: The usage for the oe-find-native-sysroot script has changed to the following: $ . oe-find-native-sysroot recipe You must now supply a recipe for recipe as part of the command. Prior to the Yocto Project &DISTRO; release, it was not necessary to provide the script with the command. oe-run-native: The usage for the oe-run-native script has changed to the following: $ oe-run-native native_recipe tool You must supply the name of the native recipe and the tool you want to run as part of the command. Prior to the Yocto Project &DISTRO; release, it was not necessary to provide the native recipe with the command. cleanup-workdir: The cleanup-workdir script has been removed because the script was found to be deleting files it should not have, which lead to broken build trees. Rather than trying to delete portions of TMPDIR and getting it wrong, it is recommended that you delete TMPDIR and have it restored from shared state (sstate) on subsequent builds. wipe-sysroot: The wipe-sysroot script has been removed as it is no longer needed with recipe-specific sysroots.

The previously deprecated bb.data.getVar(), bb.data.setVar(), and related functions have been removed in favor of d.getVar(), d.setVar(), and so forth. You need to fix any references to these old functions.

The following changes took place for BitBake: BitBake's Graphical Dependency Explorer UI Replaced: BitBake's graphical dependency explorer UI depexp was replaced by taskexp ("Task Explorer"), which provides a graphical way of exploring the task-depends.dot file. The data presented by Task Explorer is much more accurate than the data that was presented by depexp. Being able to visualize the data is an often requested feature as standard *.dot file viewers cannot usual cope with the size of the task-depends.dot file. BitBake "-g" Output Changes: The package-depends.dot and pn-depends.dot files as previously generated using the bitbake -g command have been removed. A recipe-depends.dot file is now generated as a collapsed version of task-depends.dot instead. The reason for this change is because package-depends.dot and pn-depends.dot largely date back to a time before task-based execution and do not take into account task-level dependencies between recipes, which could be misleading. Mirror Variable Splitting Changes: Mirror variables including MIRRORS, PREMIRRORS, and SSTATE_MIRRORS can now separate values entirely with spaces. Consequently, you no longer need "\\n". BitBake looks for pairs of values, which simplifies usage. There should be no change required to existing mirror variable values themselves. The Subversion (SVN) Fetcher Uses an "ssh" Parameter and Not an "rsh" Parameter: The SVN fetcher now takes an "ssh" parameter instead of an "rsh" parameter. This new optional parameter is used when the "protocol" parameter is set to "svn+ssh". You can only use the new parameter to specify the ssh program used by SVN. The SVN fetcher passes the new parameter through the SVN_SSH environment variable during the do_fetch task. See the "Subversion (SVN) Fetcher (svn://)" section in the Yocto Project BitBake User Manual for additional information. BB_SETSCENE_VERIFY_FUNCTION and BB_SETSCENE_VERIFY_FUNCTION2 Removed: Because the mechanism they were part of is no longer necessary with recipe-specific sysroots, the BB_SETSCENE_VERIFY_FUNCTION and BB_SETSCENE_VERIFY_FUNCTION2 variables have been removed.

Absolute symbolic links (symlinks) within staged files are no longer permitted and now trigger an error. Any explicit creation of symlinks can use the lnr script, which is a replacement for ln -r. If the build scripts in the software that the recipe is building are creating a number of absolute symlinks that need to be corrected, you can inherit relative_symlinks within the recipe to turn those absolute symlinks into relative symlinks.

Older GPLv2 versions of GPLv3 recipes have moved to a separate meta-gplv2 layer. If you use INCOMPATIBLE_LICENSE to exclude GPLv3 or set PREFERRED_VERSION to substitute a GPLv2 version of a GPLv3 recipe, then you must add the meta-gplv2 layer to your configuration. You can find meta-gplv2 layer in the OpenEmbedded layer index at . These relocated GPLv2 recipes do not receive the same level of maintenance as other core recipes. The recipes do not get security fixes and upstream no longer maintains them. In fact, the upstream community is actively hostile towards people that use the old versions of the recipes. Moving these recipes into a separate layer both makes the different needs of the recipes clearer and clearly identifies the number of these recipes. The long-term solution might be to move to BSD-licensed replacements of the GPLv3 components for those that need to exclude GPLv3-licensed components from the target system. This solution will be investigated for future Yocto Project releases.

The following package management changes took place: Smart package manager is replaced by DNF package manager. Smart has become unmaintained upstream, is not ported to Python 3.x. Consequently, Smart needed to be replaced. DNF is the only feasible candidate. The change in functionality is that the on-target runtime package management from remote package feeds is now done with a different tool that has a different set of command-line options. If you have scripts that call the tool directly, or use its API, they need to be fixed. For more information, see the DNF Documentation. Rpm 5.x is replaced with Rpm 4.x. This is done for two major reasons: DNF is API-incompatible with Rpm 5.x and porting it and maintaining the port is non-trivial. Rpm 5.x itself has limited maintenance upstream, and the Yocto Project is one of the very few remaining users. Berkeley DB 6.x is removed and Berkeley DB 5.x becomes the default: Version 6.x of Berkeley DB has largely been rejected by the open source community due to its AGPLv3 license. As a result, most mainstream open source projects that require DB are still developed and tested with DB 5.x. In OE-core, the only thing that was requiring DB 6.x was Rpm 5.x. Thus, no reason exists to continue carrying DB 6.x in OE-core. createrepo is replaced with createrepo_c. createrepo_c is the current incarnation of the tool that generates remote repository metadata. It is written in C as compared to createrepo, which is written in Python. createrepo_c is faster and is maintained. Architecture-independent RPM packages are "noarch" instead of "all". This change was made because too many places in DNF/RPM4 stack already make that assumption. Only the filenames and the architecture tag has changed. Nothing else has changed in OE-core system, particularly in the allarch.bbclass class. Signing of remote package feeds using PACKAGE_FEED_SIGN is not currently supported. This issue will be fully addressed in a future Yocto Project release. See defect 11209 for more information on a solution to package feed signing with RPM in the Yocto Project 2.3 release. OPKG now uses the libsolv backend for resolving package dependencies by default. This is vastly superior to OPKG's internal ad-hoc solver that was previously used. This change does have a small impact on disk (around 500 KB) and memory footprint. For further details on this change, see the commit message.

The following recipes have been removed: linux-yocto 4.8: Version 4.8 has been removed. Versions 4.1 (LTSI), 4.4 (LTS), 4.9 (LTS/LTSI) and 4.10 are now present. python-smartpm: Functionally replaced by dnf. createrepo: Replaced by the createrepo-c recipe. rpmresolve: No longer needed with the move to RPM 4 as RPM itself is used instead. gstreamer: Removed the GStreamer Git version recipes as they have been stale. 1.10.x recipes are still present. alsa-conf-base: Merged into alsa-conf since libasound depended on both. Essentially, no way existed to install only one of these. tremor: Moved to meta-multimedia. Fixed-integer Vorbis decoding is not needed by current hardware. Thus, GStreamer's ivorbis plugin has been disabled by default eliminating the need for the tremor recipe in OE-Core. gummiboot: Replaced by systemd-boot.

The following changes have been made to Wic: For more information on Wic, see the "Creating Partitioned Images Using Wic" section in the Yocto Project Development Tasks Manual. Default Output Directory Changed: Wic's default output directory is now the current directory by default instead of the unusual /var/tmp/wic. The "-o" and "--outdir" options remain unchanged and are used to specify your preferred output directory if you do not want to use the default directory. fsimage Plug-in Removed: The Wic fsimage plug-in has been removed as it duplicates functionality of the rawcopy plug-in.

The following QA checks have changed: unsafe-references-in-binaries: The unsafe-references-in-binaries QA check, which was disabled by default, has now been removed. This check was intended to detect binaries in /bin that link to libraries in /usr/lib and have the case where the user has /usr on a separate filesystem to /. The removed QA check was buggy. Additionally, /usr residing on a separate partition from / is now a rare configuration. Consequently, unsafe-references-in-binaries was removed. file-rdeps: The file-rdeps QA check is now an error by default instead of a warning. Because it is an error instead of a warning, you need to address missing runtime dependencies. For additional information, see the insane class and the "Errors and Warnings" section.

The following miscellaneous changes have occurred: In this release, a number of recipes have been changed to ignore the largefile DISTRO_FEATURES item, enabling large file support unconditionally. This feature has always been enabled by default. Disabling the feature has not been widely tested. Future releases of the Yocto Project will remove entirely the ability to disable the largefile feature, which would make it unconditionally enabled everywhere. If the DISTRO_VERSION value contains the value of the DATE variable, which is the default between Poky releases, the DATE value is explicitly excluded from /etc/issue and /etc/issue.net, which is displayed at the login prompt, in order to avoid conflicts with Multilib enabled. Regardless, the DATE value is inaccurate if the base-files recipe is restored from shared state (sstate) rather than rebuilt. If you need the build date recorded in /etc/issue* or anywhere else in your image, a better method is to define a post-processing function to do it and have the function called from ROOTFS_POSTPROCESS_COMMAND. Doing so ensures the value is always up-to-date with the created image. Dropbear's init script now disables DSA host keys by default. This change is in line with the systemd service file, which supports RSA keys only, and with recent versions of OpenSSH, which deprecates DSA host keys. The buildhistory class now correctly uses tabs as separators between all columns in installed-package-sizes.txt in order to aid import into other tools. The USE_LDCONFIG variable has been replaced with the "ldconfig" DISTRO_FEATURES feature. Distributions that previously set: USE_LDCONFIG = "0" should now instead use the following: DISTRO_FEATURES_BACKFILL_CONSIDERED_append = " ldconfig" The default value of COPYLEFT_LICENSE_INCLUDE now includes all versions of AGPL licenses in addition to GPL and LGPL. The default list is not intended to be guaranteed as a complete safe list. You should seek legal advice based on what you are distributing if you are unsure. Kernel module packages are now suffixed with the kernel version in order to allow module packages from multiple kernel versions to co-exist on a target system. If you wish to return to the previous naming scheme that does not include the version suffix, use the following: KERNEL_MODULE_PACKAGE_SUFFIX to "" Removal of libtool *.la files is now enabled by default. The *.la files are not actually needed on Linux and relocating them is an unnecessary burden. If you need to preserve these .la files (e.g. in a custom distribution), you must change INHERIT_DISTRO such that "remove-libtool" is not included in the value. Extensible SDKs built for GCC 5+ now refuse to install on a distribution where the host GCC version is 4.8 or 4.9. This change resulted from the fact that the installation is known to fail due to the way the uninative shared state (sstate) package is built. See the uninative class for additional information. All native and nativesdk recipes now use a separate DISTRO_FEATURES value instead of sharing the value used by recipes for the target, in order to avoid unnecessary rebuilds. The DISTRO_FEATURES for native recipes is DISTRO_FEATURES_NATIVE added to an intersection of DISTRO_FEATURES and DISTRO_FEATURES_FILTER_NATIVE. For nativesdk recipes, the corresponding variables are DISTRO_FEATURES_NATIVESDK and DISTRO_FEATURES_FILTER_NATIVESDK. The FILESDIR variable, which was previously deprecated and rarely used, has now been removed. You should change any recipes that set FILESDIR to set FILESPATH instead. The MULTIMACH_HOST_SYS variable has been removed as it is no longer needed with recipe-specific sysroots.

This section provides migration information for moving to the Yocto Project 2.4 Release from the prior release.

A persistent mode is now available in BitBake's default operation, replacing its previous "memory resident mode" (i.e. oe-init-build-env-memres). Now you only need to set BB_SERVER_TIMEOUT to a timeout (in seconds) and BitBake's server stays resident for that amount of time between invocations. The oe-init-build-env-memres script has been removed since a separate environment setup script is no longer needed.

This section provides information about packaging changes that have ocurred: python3 Changes: The main "python3" package now brings in all of the standard Python 3 distribution rather than a subset. This behavior matches what is expected based on traditional Linux distributions. If you wish to install a subset of Python 3, specify python-core plus one or more of the individual packages that are still produced. python3: The bz2.py, lzma.py, and _compression.py scripts have been moved from the python3-misc package to the python3-compression package. binutils: The libbfd library is now packaged in a separate "libbfd" package. This packaging saves space when certain tools (e.g. perf) are installed. In such cases, the tools only need libbfd rather than all the packages in binutils. util-linux Changes: The su program is now packaged in a separate "util-linux-su" package, which is only built when "pam" is listed in the DISTRO_FEATURES variable. util-linux should not be installed unless it is needed because su is normally provided through the shadow file format. The main util-linux package has runtime dependencies (i.e. RDEPENDS) on the util-linux-su package when "pam" is in DISTRO_FEATURES. The switch_root program is now packaged in a separate "util-linux-switch-root" package for small initramfs images that do not need the whole util-linux package or the busybox binary, which are both much larger than switch_root. The main util-linux package has a recommended runtime dependency (i.e. RRECOMMENDS) on the util-linux-switch-root package. The ionice program is now packaged in a separate "util-linux-ionice" package. The main util-linux package has a recommended runtime dependency (i.e. RRECOMMENDS) on the util-linux-ionice package. initscripts: The sushell program is now packaged in a separate "initscripts-sushell" package. This packaging change allows systems to pull sushell in when selinux is enabled. The change also eliminates needing to pull in the entire initscripts package. The main initscripts package has a runtime dependency (i.e. RDEPENDS) on the sushell package when "selinux" is in DISTRO_FEATURES. glib-2.0: The glib-2.0 package now has a recommended runtime dependency (i.e. RRECOMMENDS) on the shared-mime-info package, since large portions of GIO are not useful without the MIME database. You can remove the dependency by using the BAD_RECOMMENDATIONS variable if shared-mime-info is too large and is not required. Go Standard Runtime: The Go standard runtime has been split out from the main go recipe into a separate go-runtime recipe.

The following recipes have been removed: acpitests: This recipe is not maintained. autogen-native: No longer required by Grub, oe-core, or meta-oe. bdwgc: Nothing in OpenEmbedded-Core requires this recipe. It has moved to meta-oe. byacc: This recipe was only needed by rpm 5.x and has moved to meta-oe. gcc (5.4): The 5.4 series dropped the recipe in favor of 6.3 / 7.2. gnome-common: Deprecated upstream and no longer needed. go-bootstrap-native: Go 1.9 does its own bootstrapping so this recipe has been removed. guile: This recipe was only needed by autogen-native and remake. The recipe is no longer needed by either of these programs. libclass-isa-perl: This recipe was previously needed for LSB 4, no longer needed. libdumpvalue-perl: This recipe was previously needed for LSB 4, no longer needed. libenv-perl: This recipe was previously needed for LSB 4, no longer needed. libfile-checktree-perl: This recipe was previously needed for LSB 4, no longer needed. libi18n-collate-perl: This recipe was previously needed for LSB 4, no longer needed. libiconv: This recipe was only needed for uclibc, which was removed in the previous release. glibc and musl have their own implementations. meta-mingw still needs libiconv, so it has been moved to meta-mingw. libpng12: This recipe was previously needed for LSB. The current libpng is 1.6.x. libpod-plainer-perl: This recipe was previously needed for LSB 4, no longer needed. linux-yocto (4.1): This recipe was removed in favor of 4.4, 4.9, 4.10 and 4.12. mailx: This recipe was previously only needed for LSB compatibility, and upstream is defunct. mesa (git version only): The git version recipe was stale with respect to the release version. ofono (git version only): The git version recipe was stale with respect to the release version. portmap: This recipe is obsolete and is superseded by rpcbind. python3-pygpgme: This recipe is old and unmaintained. It was previously required by dnf, which has switched to official gpgme Python bindings. python-async: This recipe has been removed in favor of the Python 3 version. python-gitdb: This recipe has been removed in favor of the Python 3 version. python-git: This recipe was removed in favor of the Python 3 version. python-mako: This recipe was removed in favor of the Python 3 version. python-pexpect: This recipe was removed in favor of the Python 3 version. python-ptyprocess: This recipe was removed in favor of Python the 3 version. python-pycurl: Nothing is using this recipe in OpenEmbedded-Core (i.e. meta-oe). python-six: This recipe was removed in favor of the Python 3 version. python-smmap: This recipe was removed in favor of the Python 3 version. remake: Using remake as the provider of virtual/make is broken. Consequently, this recipe is not needed in OpenEmbedded-Core.

Kernel Device Tree support is now easier to enable in a kernel recipe. The Device Tree code has moved to a kernel-devicetree class. Functionality is automatically enabled for any recipe that inherits the kernel class and sets the KERNEL_DEVICETREE variable. The previous mechanism for doing this, meta/recipes-kernel/linux/linux-dtb.inc, is still available to avoid breakage, but triggers a deprecation warning. Future releases of the Yocto Project will remove meta/recipes-kernel/linux/linux-dtb.inc. It is advisable to remove any require statements that request meta/recipes-kernel/linux/linux-dtb.inc from any custom kernel recipes you might have. This will avoid breakage in post 2.4 releases.

The following package QA changes took place: The "unsafe-references-in-scripts" QA check has been removed. If you refer to ${COREBASE}/LICENSE within LIC_FILES_CHKSUM you receive a warning because this file is a description of the license for OE-Core. Use ${COMMON_LICENSE_DIR}/MIT if your recipe is MIT-licensed and you cannot use the preferred method of referring to a file within the source tree.

The following are changes to README files: The main Poky README file has been moved to the meta-poky layer and has been renamed README.poky. A symlink has been created so that references to the old location work. The README.hardware file has been moved to meta-yocto-bsp. A symlink has been created so that references to the old location work. A README.qemu file has been created with coverage of the qemu* machines.

The following are additional changes: The ROOTFS_PKGMANAGE_BOOTSTRAP variable and any references to it have been removed. You should remove this variable from any custom recipes. The meta-yocto directory has been removed. In the Yocto Project 2.1 release meta-yocto was renamed to meta-poky and the meta-yocto subdirectory remained to avoid breaking existing configurations. The maintainers.inc file, which tracks maintainers by listing a primary person responsible for each recipe in OE-Core, has been moved from meta-poky to OE-Core (i.e. from meta-poky/conf/distro/include to meta/conf/distro/include). The buildhistory class now makes a single commit per build rather than one commit per subdirectory in the repository. This behavior assumes the commits are enabled with BUILDHISTORY_COMMIT = "1", which is typical. Previously, the buildhistory class made one commit per subdirectory in the repository in order to make it easier to see the changes for a particular subdirectory. To view a particular change, specify that subdirectory as the last parameter on the git show or git diff commands. The x86-base.inc file, which is included by all x86-based machine configurations, now sets IMAGE_FSTYPES using ?= to "live" rather than appending with +=. This change makes the default easier to override. BitBake fires multiple "BuildStarted" events when multiconfig is enabled (one per configuration). For more information, see the "Events" in the BitBake User Manual. By default, the security_flags.inc file sets a GCCPIE variable with an option to enable Position Independent Executables (PIE) within gcc. Enabling PIE in the GNU C Compiler (GCC), makes Return Oriented Programming (ROP) attacks much more difficult to execute. OE-Core now provides a bitbake-layers plugin that implements a "create-layer" subcommand. The implementation of this subcommand has resulted in the yocto-layer script being deprecated and will likely be removed in the next Yocto Project release. The vmdk, vdi, and qcow2 image file types are now used in conjunction with the "wic" image type through CONVERSION_CMD. Consequently, the equivalent image types are now wic.vmdk, wic.vdi, and wic.qcow2, respectively. do_image_<type>[depends] has replaced IMAGE_DEPENDS_<type>. If you have your own classes that implement custom image types, then you need to update them. OpenSSL 1.1 has been introduced. However, the default is still 1.0.x through the PREFERRED_VERSION variable. This preference is set is due to the remaining compatibility issues with other software. The PROVIDES variable in the openssl 1.0 recipe now includes "openssl10" as a marker that can be used in DEPENDS within recipes that build software that still depend on OpenSSL 1.0. To ensure consistent behavior, BitBake's "-r" and "-R" options (i.e. prefile and postfile), which are used to read or post-read additional configuration files from the command line, now only affect the current BitBake command. Before these BitBake changes, these options would "stick" for future executions.