BitBake User Manual BitBake Team 2004, 2005, 2006 Chris Larson Phil Blundell This work is licensed under the Creative Commons Attribution License. To view a copy of this license, visit http://creativecommons.org/licenses/by/2.5/ or send a letter to Creative Commons, 559 Nathan Abbott Way, Stanford, California 94305, USA. Introduction
Overview BitBake is, at its simplest, a tool for executing tasks and managing metadata. As such, its similarities to GNU make and other build tools are readily apparent. It was inspired by Portage, the package management system used by the Gentoo Linux distribution. BitBake is the basis of the OpenEmbedded project, which is being used to build and maintain a number of embedded Linux distributions, including OpenZaurus and Familiar.
Background and Goals Prior to BitBake, no other build tool adequately met the needs of an aspiring embedded Linux distribution. All of the buildsystems used by traditional desktop Linux distributions lacked important functionality, and none of the ad-hoc buildroot systems, prevalent in the embedded space, were scalable or maintainable. Some important goals for BitBake were: Handle crosscompilation. Handle interpackage dependencies (build time on target architecture, build time on native architecture, and runtime). Support running any number of tasks within a given package, including, but not limited to, fetching upstream sources, unpacking them, patching them, configuring them, et cetera. Must be linux distribution agnostic (both build and target). Must be architecture agnostic Must support multiple build and target operating systems (including cygwin, the BSDs, etc). Must be able to be self contained, rather than tightly integrated into the build machine's root filesystem. There must be a way to handle conditional metadata (on target architecture, operating system, distribution, machine). It must be easy for the person using the tools to supply their own local metadata and packages to operate against. Must make it easy to collaborate between multiple projects using BitBake for their builds. Should provide an inheritance mechanism to share common metadata between many packages. Et cetera... BitBake satisfies all these and many more. Flexibility and power have always been the priorities. It is highly extensible, supporting embedded Python code and execution of any arbitrary tasks.
Metadata
Description BitBake metadata can be classified into 3 major areas: Configuration Files .bb Files Classes What follows are a large number of examples of BitBake metadata. Any syntax which isn't supported in any of the aforementioned areas will be documented as such.
Basic variable setting VARIABLE = "value" In this example, VARIABLE is value.
Variable expansion BitBake supports variables referencing one another's contents using a syntax which is similar to shell scripting A = "aval" B = "pre${A}post" This results in A containing aval and B containing preavalpost.
Immediate variable expansion (:=) := results in a variable's contents being expanded immediately, rather than when the variable is actually used. T = "123" A := "${B} ${A} test ${T}" T = "456" B = "${T} bval" C = "cval" C := "${C}append" In that example, A would contain test 123, B would contain 456 bval, and C would be cvalappend.
Appending (+=) and prepending (=+) B = "bval" B += "additionaldata" C = "cval" C =+ "test" In this example, B is now bval additionaldata and C is test cval.
Appending (.=) and prepending (=.) without spaces B = "bval" B .= "additionaldata" C = "cval" C =. "test" In this example, B is now bvaladditionaldata and C is testcval. In contrast to the above Appending and Prepending operators no additional space will be introduced.
Conditional metadata set OVERRIDES is a : seperated variable containing each item you want to satisfy conditions. So, if you have a variable which is conditional on arm, and arm is in OVERRIDES, then the arm specific version of the variable is used rather than the non-conditional version. Example: OVERRIDES = "architecture:os:machine" TEST = "defaultvalue" TEST_os = "osspecificvalue" TEST_condnotinoverrides = "othercondvalue" In this example, TEST would be osspecificvalue, due to the condition os being in OVERRIDES.
Conditional appending BitBake also supports appending and prepending to variables based on whether something is in OVERRIDES. Example: DEPENDS = "glibc ncurses" OVERRIDES = "machine:local" DEPENDS_append_machine = " libmad" In this example, DEPENDS is set to glibc ncurses libmad.
Inclusion Next, there is the include directive, which causes BitBake to parse in whatever file you specify, and insert it at that location, which is not unlike make. However, if the path specified on the include line is a relative path, BitBake will locate the first one it can find within BBPATH.
Requiring Inclusion In contrast to the include directive, require will raise an ParseError if the to be included file can not be found. Otherwise it will behave just like the include directive.
Python variable expansion DATE = "${@time.strftime('%Y%m%d',time.gmtime())}" This would result in the DATE variable containing today's date.
Defining executable metadata NOTE: This is only supported in .bb and .bbclass files. do_mytask () { echo "Hello, world!" } This is essentially identical to setting a variable, except that this variable happens to be executable shell code. python do_printdate () { import time print time.strftime('%Y%m%d', time.gmtime()) } This is the similar to the previous, but flags it as python so that BitBake knows it is python code.
Defining python functions into the global python namespace NOTE: This is only supported in .bb and .bbclass files. def get_depends(bb, d): if bb.data.getVar('SOMECONDITION', d, True): return "dependencywithcond" else: return "dependency" SOMECONDITION = "1" DEPENDS = "${@get_depends(bb, d)}" This would result in DEPENDS containing dependencywithcond.
Inheritance NOTE: This is only supported in .bb and .bbclass files. The inherit directive is a means of specifying what classes of functionality your .bb requires. It is a rudamentary form of inheritence. For example, you can easily abstract out the tasks involved in building a package that uses autoconf and automake, and put that into a bbclass for your packages to make use of. A given bbclass is located by searching for classes/filename.oeclass in BBPATH, where filename is what you inherited.
Tasks NOTE: This is only supported in .bb and .bbclass files. In BitBake, each step that needs to be run for a given .bb is known as a task. There is a command addtask to add new tasks (must be a defined python executable metadata and must start with do_) and describe intertask dependencies. python do_printdate () { import time print time.strftime('%Y%m%d', time.gmtime()) } addtask printdate before do_build This defines the necessary python function and adds it as a task which is now a dependency of do_build (the default task). If anyone executes the do_build task, that will result in do_printdate being run first.
Events NOTE: This is only supported in .bb and .bbclass files. BitBake allows to install event handlers. Events are triggered at certain points during operation, such as, the beginning of operation against a given .bb, the start of a given task, task failure, task success, et cetera. The intent was to make it easy to do things like email notifications on build failure. addhandler myclass_eventhandler python myclass_eventhandler() { from bb.event import NotHandled, getName from bb import data print "The name of the Event is %s" % getName(e) print "The file we run for is %s" % data.getVar('FILE', e.data, True) return NotHandled } This event handler gets called every time an event is triggered. A global variable e is defined. e.data contains an instance of bb.data. With the getName(e) method one can get the name of the triggered event.The above event handler prints the name of the event and the content of the FILE variable.
Parsing
Configuration Files The first of the classifications of metadata in BitBake is configuration metadata. This metadata is global, and therefore affects all packages and tasks which are executed. Currently, BitBake has hardcoded knowledge of a single configuration file. It expects to find 'conf/bitbake.conf' somewhere in the user specified BBPATH. That configuration file generally has include directives to pull in any other metadata (generally files specific to architecture, machine, local and so on. Only variable definitions and include directives are allowed in .conf files.
Classes BitBake classes are our rudamentary inheritence mechanism. As briefly mentioned in the metadata introduction, they're parsed when an inherit directive is encountered, and they are located in classes/ relative to the dirs in BBPATH.
.bb Files A BitBake (.bb) file is a logical unit of tasks to be executed. Normally this is a package to be built. Inter-.bb dependencies are obeyed. The files themselves are located via the BBFILES variable, which is set to a space seperated list of .bb files, and does handle wildcards.
File Download support
Overview BitBake provides support to download files this procedure is called fetching. The SRC_URI is normally used to indicate BitBake which files to fetch. The next sections will describe th available fetchers and the options they have. Each Fetcher honors a set of Variables and a per URI parameters separated by a ; consisting of a key and a value. The semantic of the Variables and Parameters are defined by the Fetcher. BitBakes tries to have a consistent semantic between the different Fetchers.
Local File Fetcher The URN for the Local File Fetcher is file. The filename can be either absolute or relative. If the filename is relative FILESPATH and FILESDIR will be used to find the appropriate relative file depending on the OVERRIDES. Single files and complete directories can be specified. SRC_URI= "file://relativefile.patch" SRC_URI= "file://relativefile.patch;this=ignored" SRC_URI= "file:///Users/ich/very_important_software"
CVS File Fetcher The URN for the CVS Fetcher is cvs. This Fetcher honors the variables DL_DIR, SRCDATE, FETCHCOMMAND_cvs, UPDATECOMMAND_cvs. DL_DIRS specifies where a temporary checkout is saved, SRCDATE specifies which date to use when doing the fetching (the special value of "now" will cause the checkout to be updated on every build), FETCHCOMMAND and UPDATECOMMAND specify which executables should be used when doing the CVS checkout or update. The supported Parameters are module, tag, date, method, localdir, rsh. The module specifies which module to check out, the tag describes which CVS TAG should be used for the checkout by default the TAG is empty. A date can be specified to override the SRCDATE of the configuration to checkout a specific date. The special value of "now" will cause the checkout to be updated on every build.method is by default pserver, if ext is used the rsh parameter will be evaluated and CVS_RSH will be set. Finally localdir is used to checkout into a special directory relative to CVSDIR>. SRC_URI = "cvs://CVSROOT;module=mymodule;tag=some-version;method=ext" SRC_URI = "cvs://CVSROOT;module=mymodule;date=20060126;localdir=usethat"
HTTP/FTP Fetcher The URNs for the HTTP/FTP are http, https and ftp. This Fetcher honors the variables DL_DIR, FETCHCOMMAND_wget, PREMIRRORS, MIRRORS. The DL_DIR defines where to store the fetched file, FETCHCOMMAND contains the command used for fetching. ${URI} and ${FILES} will be replaced by the uri and basename of the to be fetched file. PREMIRRORS will be tried first when fetching a file if that fails the actual file will be tried and finally all MIRRORS will be tried. The only supported Parameter is md5sum. After a fetch the md5sum of the file will be calculated and the two sums will be compared. SRC_URI = "http://oe.handhelds.org/not_there.aac;md5sum=12343" SRC_URI = "ftp://oe.handhelds.org/not_there_as_well.aac;md5sum=1234" SRC_URI = "ftp://you@oe.handheld.sorg/home/you/secret.plan;md5sum=1234"
SVK Fetcher Currently NOT supported
SVN Fetcher The URN for the SVN Fetcher is svn. This Fetcher honors the variables FETCHCOMMAND_svn, DL_DIR, SRCDATE. FETCHCOMMAND contains the subversion command, DL_DIR is the directory where tarballs will be saved, SRCDATE specifies which date to use when doing the fetching (the special value of "now" will cause the checkout to be updated on every build). The supported Parameters are proto, rev. proto is the subversion prototype, rev is the subversions revision. SRC_URI = "svn://svn.oe.handhelds.org/svn;module=vip;proto=http;rev=667" SRC_URI = "svn://svn.oe.handhelds.org/svn/;module=opie;proto=svn+ssh;date=20060126"
GIT Fetcher The URN for the GIT Fetcher is git. The Variables DL_DIR, GITDIR are used. DL_DIR will be used to store the checkedout version. GITDIR will be used as the base directory where the git tree is cloned to. The Parameters are tag, protocol. tag is a git tag, the default is master. protocol is the git protocol to use and defaults to rsync. SRC_URI = "git://git.oe.handhelds.org/git/vip.git;tag=version-1" SRC_URI = "git://git.oe.handhelds.org/git/vip.git;protocol=http"
Commands
bbread bbread is a command for displaying BitBake metadata. When run with no arguments, it has the core parse 'conf/bitbake.conf', as located in BBPATH, and displays that. If you supply a file on the commandline, such as a .bb, then it parses that afterwards, using the aforementioned configuration metadata. NOTE: the stand a lone bbread command was removed. Instead of bbread use bitbake -e.
bitbake
Introduction bitbake is the primary command in the system. It facilitates executing tasks in a single .bb file, or executing a given task on a set of multiple .bb files, accounting for interdependencies amongst them.
Usage and Syntax $ bitbake --help usage: bitbake [options] [package ...] Executes the specified task (default is 'build') for a given set of BitBake files. It expects that BBFILES is defined, which is a space seperated list of files to be executed. BBFILES does support wildcards. Default BBFILES are the .bb files in the current directory. options: --version show program's version number and exit -h, --help show this help message and exit -b BUILDFILE, --buildfile=BUILDFILE execute the task against this .bb file, rather than a package from BBFILES. -k, --continue continue as much as possible after an error. While the target that failed, and those that depend on it, cannot be remade, the other dependencies of these targets can be processed all the same. -f, --force force run of specified cmd, regardless of stamp status -i, --interactive drop into the interactive mode also called the BitBake shell. -c CMD, --cmd=CMD Specify task to execute. Note that this only executes the specified task for the providee and the packages it depends on, i.e. 'compile' does not implicitly call stage for the dependencies (IOW: use only if you know what you are doing). Depending on the base.bbclass a listtasks tasks is defined and will show available tasks -r FILE, --read=FILE read the specified file before bitbake.conf -v, --verbose output more chit-chat to the terminal -D, --debug Increase the debug level. You can specify this more than once. -n, --dry-run don't execute, just go through the motions -p, --parse-only quit after parsing the BB files (developers only) -d, --disable-psyco disable using the psyco just-in-time compiler (not recommended) -s, --show-versions show current and preferred versions of all packages -e, --environment show the global or per-package environment (this is what used to be bbread) -g, --graphviz emit the dependency trees of the specified packages in the dot syntax -I IGNORED_DOT_DEPS, --ignore-deps=IGNORED_DOT_DEPS Stop processing at the given list of dependencies when generating dependency graphs. This can help to make the graph more appealing Executing a task against a single .bb Executing tasks for a single file is relatively simple. You specify the file in question, and bitbake parses it and executes the specified task (or build by default). It obeys intertask dependencies when doing so. clean task: $ bitbake -b blah_1.0.bb -c clean build task: $ bitbake -b blah_1.0.bb Executing tasks against a set of .bb files There are a number of additional complexities introduced when one wants to manage multiple .bb files. Clearly there needs to be a way to tell bitbake what files are available, and of those, which we want to execute at this time. There also needs to be a way for each .bb to express its dependencies, both for build time and runtime. There must be a way for the user to express their preferences when multiple .bb's provide the same functionality, or when there are multiple versions of a .bb. The next section, Metadata, outlines how one goes about specifying such things. Note that the bitbake command, when not using --buildfile, accepts a PROVIDER, not a filename or anything else. By default, a .bb generally PROVIDES its packagename, packagename-version, and packagename-version-revision. $ bitbake blah $ bitbake blah-1.0 $ bitbake blah-1.0-r0 $ bitbake -c clean blah $ bitbake virtual/whatever $ bitbake -c clean virtual/whatever Generating dependency graphs BitBake is able to generate dependency graphs using the dot syntax. These graphs can be converted to images using the dot application from graphviz. Three files will be written into the current working directory, depends.dot containing DEPENDS variables, rdepends.dot and alldepends.dot containing both DEPENDS and RDEPENDS. To stop depending on common depends one can use the -I depend to omit these from the graph. This can lead to more readable graphs. E.g. this way DEPENDS from inherited classes, e.g. base.bbclass, can be removed from the graph. $ bitbake -g blah $ bitbake -g -I virtual/whatever -I bloom blah
Metadata As you may have seen in the usage information, or in the information about .bb files, the BBFILES variable is how the bitbake tool locates its files. This variable is a space seperated list of files that are available, and supports wildcards. Setting BBFILES BBFILES = "/path/to/bbfiles/*.bb" With regard to dependencies, it expects the .bb to define a DEPENDS variable, which contains a space seperated list of package names, which themselves are the PN variable. The PN variable is, in general, by default, set to a component of the .bb filename. Depending on another .bb a.bb: PN = "package-a" DEPENDS += "package-b" b.bb: PN = "package-b" Using PROVIDES This example shows the usage of the PROVIDES variable, which allows a given .bb to specify what functionality it provides. package1.bb: PROVIDES += "virtual/package" package2.bb: DEPENDS += "virtual/package" package3.bb: PROVIDES += "virtual/package" As you can see, here there are two different .bb's that provide the same functionality (virtual/package). Clearly, there needs to be a way for the person running bitbake to control which of those providers gets used. There is, indeed, such a way. The following would go into a .conf file, to select package1: PREFERRED_PROVIDER_virtual/package = "package1" Specifying version preference When there are multiple versions of a given package, bitbake defaults to selecting the most recent version, unless otherwise specified. If the .bb in question has a DEFAULT_PREFERENCE set lower than the other .bb's (default is 0), then it will not be selected. This allows the person or persons maintaining the repository of .bb files to specify their preferences for the default selected version. In addition, the user can specify their preferences with regard to version. If the first .bb is named a_1.1.bb, then the PN variable will be set to a, and the PV variable will be set to 1.1. If we then have an a_1.2.bb, bitbake will choose 1.2 by default. However, if we define the following variable in a .conf that bitbake parses, we can change that. PREFERRED_VERSION_a = "1.1" Using <quote>bbfile collections</quote> bbfile collections exist to allow the user to have multiple repositories of bbfiles that contain the same exact package. For example, one could easily use them to make one's own local copy of an upstream repository, but with custom modifications that one does not want upstream. Usage: BBFILES = "/stuff/openembedded/*/*.bb /stuff/openembedded.modified/*/*.bb" BBFILE_COLLECTIONS = "upstream local" BBFILE_PATTERN_upstream = "^/stuff/openembedded/" BBFILE_PATTERN_local = "^/stuff/openembedded.modified/" BBFILE_PRIORITY_upstream = "5" BBFILE_PRIORITY_local = "10"