From c527fd1f14c27855a37f2e8ac5346ce8d940ced2 Mon Sep 17 00:00:00 2001 From: Tudor Florea Date: Thu, 16 Oct 2014 03:05:19 +0200 Subject: initial commit for Enea Linux 4.0-140929 Migrated from the internal git server on the daisy-enea-point-release branch Signed-off-by: Tudor Florea --- .../wpa-supplicant/wpa_supplicant.conf | 690 +++++++++++++++++++++ 1 file changed, 690 insertions(+) create mode 100644 meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf (limited to 'meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf') diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf new file mode 100644 index 0000000000..68258f5ee2 --- /dev/null +++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf @@ -0,0 +1,690 @@ +##### Example wpa_supplicant configuration file ############################### +# +# This file describes configuration file format and lists all available option. +# Please also take a look at simpler configuration examples in 'examples' +# subdirectory. +# +# Empty lines and lines starting with # are ignored + +# NOTE! This file may contain password information and should probably be made +# readable only by root user on multiuser systems. + +# Note: All file paths in this configuration file should use full (absolute, +# not relative to working directory) path in order to allow working directory +# to be changed. This can happen if wpa_supplicant is run in the background. + +# Whether to allow wpa_supplicant to update (overwrite) configuration +# +# This option can be used to allow wpa_supplicant to overwrite configuration +# file whenever configuration is changed (e.g., new network block is added with +# wpa_cli or wpa_gui, or a password is changed). This is required for +# wpa_cli/wpa_gui to be able to store the configuration changes permanently. +# Please note that overwriting configuration file will remove the comments from +# it. +#update_config=1 + +# global configuration (shared by all network blocks) +# +# Parameters for the control interface. If this is specified, wpa_supplicant +# will open a control interface that is available for external programs to +# manage wpa_supplicant. The meaning of this string depends on which control +# interface mechanism is used. For all cases, the existence of this parameter +# in configuration is used to determine whether the control interface is +# enabled. +# +# For UNIX domain sockets (default on Linux and BSD): This is a directory that +# will be created for UNIX domain sockets for listening to requests from +# external programs (CLI/GUI, etc.) for status information and configuration. +# The socket file will be named based on the interface name, so multiple +# wpa_supplicant processes can be run at the same time if more than one +# interface is used. +# /var/run/wpa_supplicant is the recommended directory for sockets and by +# default, wpa_cli will use it when trying to connect with wpa_supplicant. +# +# Access control for the control interface can be configured by setting the +# directory to allow only members of a group to use sockets. This way, it is +# possible to run wpa_supplicant as root (since it needs to change network +# configuration and open raw sockets) and still allow GUI/CLI components to be +# run as non-root users. However, since the control interface can be used to +# change the network configuration, this access needs to be protected in many +# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you +# want to allow non-root users to use the control interface, add a new group +# and change this value to match with that group. Add users that should have +# control interface access to this group. If this variable is commented out or +# not included in the configuration file, group will not be changed from the +# value it got by default when the directory or socket was created. +# +# When configuring both the directory and group, use following format: +# DIR=/var/run/wpa_supplicant GROUP=wheel +# DIR=/var/run/wpa_supplicant GROUP=0 +# (group can be either group name or gid) +# +# For UDP connections (default on Windows): The value will be ignored. This +# variable is just used to select that the control interface is to be created. +# The value can be set to, e.g., udp (ctrl_interface=udp) +# +# For Windows Named Pipe: This value can be used to set the security descriptor +# for controlling access to the control interface. Security descriptor can be +# set using Security Descriptor String Format (see http://msdn.microsoft.com/ +# library/default.asp?url=/library/en-us/secauthz/security/ +# security_descriptor_string_format.asp). The descriptor string needs to be +# prefixed with SDDL=. For example, ctrl_interface=SDDL=D: would set an empty +# DACL (which will reject all connections). See README-Windows.txt for more +# information about SDDL string format. +# +ctrl_interface=/var/run/wpa_supplicant + +# IEEE 802.1X/EAPOL version +# wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which defines +# EAPOL version 2. However, there are many APs that do not handle the new +# version number correctly (they seem to drop the frames completely). In order +# to make wpa_supplicant interoperate with these APs, the version number is set +# to 1 by default. This configuration value can be used to set it to the new +# version (2). +eapol_version=1 + +# AP scanning/selection +# By default, wpa_supplicant requests driver to perform AP scanning and then +# uses the scan results to select a suitable AP. Another alternative is to +# allow the driver to take care of AP scanning and selection and use +# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association +# information from the driver. +# 1: wpa_supplicant initiates scanning and AP selection +# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association +# parameters (e.g., WPA IE generation); this mode can also be used with +# non-WPA drivers when using IEEE 802.1X mode; do not try to associate with +# APs (i.e., external program needs to control association). This mode must +# also be used when using wired Ethernet drivers. +# 2: like 0, but associate with APs using security policy and SSID (but not +# BSSID); this can be used, e.g., with ndiswrapper and NDIS drivers to +# enable operation with hidden SSIDs and optimized roaming; in this mode, +# the network blocks in the configuration file are tried one by one until +# the driver reports successful association; each network block should have +# explicit security policy (i.e., only one option in the lists) for +# key_mgmt, pairwise, group, proto variables +ap_scan=1 + +# EAP fast re-authentication +# By default, fast re-authentication is enabled for all EAP methods that +# support it. This variable can be used to disable fast re-authentication. +# Normally, there is no need to disable this. +fast_reauth=1 + +# OpenSSL Engine support +# These options can be used to load OpenSSL engines. +# The two engines that are supported currently are shown below: +# They are both from the opensc project (http://www.opensc.org/) +# By default no engines are loaded. +# make the opensc engine available +#opensc_engine_path=/usr/lib/opensc/engine_opensc.so +# make the pkcs11 engine available +#pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so +# configure the path to the pkcs11 module required by the pkcs11 engine +#pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so + +# Dynamic EAP methods +# If EAP methods were built dynamically as shared object files, they need to be +# loaded here before being used in the network blocks. By default, EAP methods +# are included statically in the build, so these lines are not needed +#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_tls.so +#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_md5.so + +# Driver interface parameters +# This field can be used to configure arbitrary driver interace parameters. The +# format is specific to the selected driver interface. This field is not used +# in most cases. +#driver_param="field=value" + +# Maximum lifetime for PMKSA in seconds; default 43200 +#dot11RSNAConfigPMKLifetime=43200 +# Threshold for reauthentication (percentage of PMK lifetime); default 70 +#dot11RSNAConfigPMKReauthThreshold=70 +# Timeout for security association negotiation in seconds; default 60 +#dot11RSNAConfigSATimeout=60 + +# network block +# +# Each network (usually AP's sharing the same SSID) is configured as a separate +# block in this configuration file. The network blocks are in preference order +# (the first match is used). +# +# network block fields: +# +# disabled: +# 0 = this network can be used (default) +# 1 = this network block is disabled (can be enabled through ctrl_iface, +# e.g., with wpa_cli or wpa_gui) +# +# id_str: Network identifier string for external scripts. This value is passed +# to external action script through wpa_cli as WPA_ID_STR environment +# variable to make it easier to do network specific configuration. +# +# ssid: SSID (mandatory); either as an ASCII string with double quotation or +# as hex string; network name +# +# scan_ssid: +# 0 = do not scan this SSID with specific Probe Request frames (default) +# 1 = scan with SSID-specific Probe Request frames (this can be used to +# find APs that do not accept broadcast SSID or use multiple SSIDs; +# this will add latency to scanning, so enable this only when needed) +# +# bssid: BSSID (optional); if set, this network block is used only when +# associating with the AP using the configured BSSID +# +# priority: priority group (integer) +# By default, all networks will get same priority group (0). If some of the +# networks are more desirable, this field can be used to change the order in +# which wpa_supplicant goes through the networks when selecting a BSS. The +# priority groups will be iterated in decreasing priority (i.e., the larger the +# priority value, the sooner the network is matched against the scan results). +# Within each priority group, networks will be selected based on security +# policy, signal strength, etc. +# Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are not +# using this priority to select the order for scanning. Instead, they try the +# networks in the order that used in the configuration file. +# +# mode: IEEE 802.11 operation mode +# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default) +# 1 = IBSS (ad-hoc, peer-to-peer) +# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP) +# and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In addition, ap_scan has +# to be set to 2 for IBSS. WPA-None requires following network block options: +# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not +# both), and psk must also be set. +# +# proto: list of accepted protocols +# WPA = WPA/IEEE 802.11i/D3.0 +# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN) +# If not set, this defaults to: WPA RSN +# +# key_mgmt: list of accepted authenticated key management protocols +# WPA-PSK = WPA pre-shared key (this requires 'psk' field) +# WPA-EAP = WPA using EAP authentication (this can use an external +# program, e.g., Xsupplicant, for IEEE 802.1X EAP Authentication +# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically +# generated WEP keys +# NONE = WPA is not used; plaintext or static WEP could be used +# If not set, this defaults to: WPA-PSK WPA-EAP +# +# auth_alg: list of allowed IEEE 802.11 authentication algorithms +# OPEN = Open System authentication (required for WPA/WPA2) +# SHARED = Shared Key authentication (requires static WEP keys) +# LEAP = LEAP/Network EAP (only used with LEAP) +# If not set, automatic selection is used (Open System with LEAP enabled if +# LEAP is allowed as one of the EAP methods). +# +# pairwise: list of accepted pairwise (unicast) ciphers for WPA +# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] +# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0] +# NONE = Use only Group Keys (deprecated, should not be included if APs support +# pairwise keys) +# If not set, this defaults to: CCMP TKIP +# +# group: list of accepted group (broadcast/multicast) ciphers for WPA +# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] +# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0] +# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key +# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11] +# If not set, this defaults to: CCMP TKIP WEP104 WEP40 +# +# psk: WPA preshared key; 256-bit pre-shared key +# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e., +# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be +# generated using the passphrase and SSID). ASCII passphrase must be between +# 8 and 63 characters (inclusive). +# This field is not needed, if WPA-EAP is used. +# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys +# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant +# startup and reconfiguration time can be optimized by generating the PSK only +# only when the passphrase or SSID has actually changed. +# +# eapol_flags: IEEE 802.1X/EAPOL options (bit field) +# Dynamic WEP key required for non-WPA mode +# bit0 (1): require dynamically generated unicast WEP key +# bit1 (2): require dynamically generated broadcast WEP key +# (3 = require both keys; default) +# Note: When using wired authentication, eapol_flags must be set to 0 for the +# authentication to be completed successfully. +# +# proactive_key_caching: +# Enable/disable opportunistic PMKSA caching for WPA2. +# 0 = disabled (default) +# 1 = enabled +# +# wep_key0..3: Static WEP key (ASCII in double quotation, e.g. "abcde" or +# hex without quotation, e.g., 0102030405) +# wep_tx_keyidx: Default WEP key index (TX) (0..3) +# +# peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e DLS) is +# allowed. This is only used with RSN/WPA2. +# 0 = disabled (default) +# 1 = enabled +#peerkey=1 +# +# Following fields are only used with internal EAP implementation. +# eap: space-separated list of accepted EAP methods +# MD5 = EAP-MD5 (unsecure and does not generate keying material -> +# cannot be used with WPA; to be used as a Phase 2 method +# with EAP-PEAP or EAP-TTLS) +# MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used +# as a Phase 2 method with EAP-PEAP or EAP-TTLS) +# OTP = EAP-OTP (cannot be used separately with WPA; to be used +# as a Phase 2 method with EAP-PEAP or EAP-TTLS) +# GTC = EAP-GTC (cannot be used separately with WPA; to be used +# as a Phase 2 method with EAP-PEAP or EAP-TTLS) +# TLS = EAP-TLS (client and server certificate) +# PEAP = EAP-PEAP (with tunnelled EAP authentication) +# TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2 +# authentication) +# If not set, all compiled in methods are allowed. +# +# identity: Identity string for EAP +# anonymous_identity: Anonymous identity string for EAP (to be used as the +# unencrypted identity with EAP types that support different tunnelled +# identity, e.g., EAP-TTLS) +# password: Password string for EAP +# ca_cert: File path to CA certificate file (PEM/DER). This file can have one +# or more trusted CA certificates. If ca_cert and ca_path are not +# included, server certificate will not be verified. This is insecure and +# a trusted CA certificate should always be configured when using +# EAP-TLS/TTLS/PEAP. Full path should be used since working directory may +# change when wpa_supplicant is run in the background. +# On Windows, trusted CA certificates can be loaded from the system +# certificate store by setting this to cert_store://, e.g., +# ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT". +# Note that when running wpa_supplicant as an application, the user +# certificate store (My user account) is used, whereas computer store +# (Computer account) is used when running wpasvc as a service. +# ca_path: Directory path for CA certificate files (PEM). This path may +# contain multiple CA certificates in OpenSSL format. Common use for this +# is to point to system trusted CA list which is often installed into +# directory like /etc/ssl/certs. If configured, these certificates are +# added to the list of trusted CAs. ca_cert may also be included in that +# case, but it is not required. +# client_cert: File path to client certificate file (PEM/DER) +# Full path should be used since working directory may change when +# wpa_supplicant is run in the background. +# Alternatively, a named configuration blob can be used by setting this +# to blob://. +# private_key: File path to client private key file (PEM/DER/PFX) +# When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be +# commented out. Both the private key and certificate will be read from +# the PKCS#12 file in this case. Full path should be used since working +# directory may change when wpa_supplicant is run in the background. +# Windows certificate store can be used by leaving client_cert out and +# configuring private_key in one of the following formats: +# cert://substring_to_match +# hash://certificate_thumbprint_in_hex +# for example: private_key="hash://63093aa9c47f56ae88334c7b65a4" +# Note that when running wpa_supplicant as an application, the user +# certificate store (My user account) is used, whereas computer store +# (Computer account) is used when running wpasvc as a service. +# Alternatively, a named configuration blob can be used by setting this +# to blob://. +# private_key_passwd: Password for private key file (if left out, this will be +# asked through control interface) +# dh_file: File path to DH/DSA parameters file (in PEM format) +# This is an optional configuration file for setting parameters for an +# ephemeral DH key exchange. In most cases, the default RSA +# authentication does not use this configuration. However, it is possible +# setup RSA to use ephemeral DH key exchange. In addition, ciphers with +# DSA keys always use ephemeral DH keys. This can be used to achieve +# forward secrecy. If the file is in DSA parameters format, it will be +# automatically converted into DH params. +# subject_match: Substring to be matched against the subject of the +# authentication server certificate. If this string is set, the server +# sertificate is only accepted if it contains this string in the subject. +# The subject string is in following format: +# /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com +# altsubject_match: Semicolon separated string of entries to be matched against +# the alternative subject name of the authentication server certificate. +# If this string is set, the server sertificate is only accepted if it +# contains one of the entries in an alternative subject name extension. +# altSubjectName string is in following format: TYPE:VALUE +# Example: EMAIL:server@example.com +# Example: DNS:server.example.com;DNS:server2.example.com +# Following types are supported: EMAIL, DNS, URI +# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters +# (string with field-value pairs, e.g., "peapver=0" or +# "peapver=1 peaplabel=1") +# 'peapver' can be used to force which PEAP version (0 or 1) is used. +# 'peaplabel=1' can be used to force new label, "client PEAP encryption", +# to be used during key derivation when PEAPv1 or newer. Most existing +# PEAPv1 implementation seem to be using the old label, "client EAP +# encryption", and wpa_supplicant is now using that as the default value. +# Some servers, e.g., Radiator, may require peaplabel=1 configuration to +# interoperate with PEAPv1; see eap_testing.txt for more details. +# 'peap_outer_success=0' can be used to terminate PEAP authentication on +# tunneled EAP-Success. This is required with some RADIUS servers that +# implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g., +# Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode) +# include_tls_length=1 can be used to force wpa_supplicant to include +# TLS Message Length field in all TLS messages even if they are not +# fragmented. +# sim_min_num_chal=3 can be used to configure EAP-SIM to require three +# challenges (by default, it accepts 2 or 3) +# phase2: Phase2 (inner authentication with TLS tunnel) parameters +# (string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or +# "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS) +# Following certificate/private key fields are used in inner Phase2 +# authentication when using EAP-TTLS or EAP-PEAP. +# ca_cert2: File path to CA certificate file. This file can have one or more +# trusted CA certificates. If ca_cert2 and ca_path2 are not included, +# server certificate will not be verified. This is insecure and a trusted +# CA certificate should always be configured. +# ca_path2: Directory path for CA certificate files (PEM) +# client_cert2: File path to client certificate file +# private_key2: File path to client private key file +# private_key2_passwd: Password for private key file +# dh_file2: File path to DH/DSA parameters file (in PEM format) +# subject_match2: Substring to be matched against the subject of the +# authentication server certificate. +# altsubject_match2: Substring to be matched against the alternative subject +# name of the authentication server certificate. +# +# fragment_size: Maximum EAP fragment size in bytes (default 1398). +# This value limits the fragment size for EAP methods that support +# fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set +# small enough to make the EAP messages fit in MTU of the network +# interface used for EAPOL. The default value is suitable for most +# cases. +# +# EAP-PSK variables: +# eappsk: 16-byte (128-bit, 32 hex digits) pre-shared key in hex format +# nai: user NAI +# +# EAP-PAX variables: +# eappsk: 16-byte (128-bit, 32 hex digits) pre-shared key in hex format +# +# EAP-SAKE variables: +# eappsk: 32-byte (256-bit, 64 hex digits) pre-shared key in hex format +# (this is concatenation of Root-Secret-A and Root-Secret-B) +# nai: user NAI (PEERID) +# +# EAP-GPSK variables: +# eappsk: Pre-shared key in hex format (at least 128 bits, i.e., 32 hex digits) +# nai: user NAI (ID_Client) +# +# EAP-FAST variables: +# pac_file: File path for the PAC entries. wpa_supplicant will need to be able +# to create this file and write updates to it when PAC is being +# provisioned or refreshed. Full path to the file should be used since +# working directory may change when wpa_supplicant is run in the +# background. Alternatively, a named configuration blob can be used by +# setting this to blob:// +# phase1: fast_provisioning=1 option enables in-line provisioning of EAP-FAST +# credentials (PAC) +# +# wpa_supplicant supports number of "EAP workarounds" to work around +# interoperability issues with incorrectly behaving authentication servers. +# These are enabled by default because some of the issues are present in large +# number of authentication servers. Strict EAP conformance mode can be +# configured by disabling workarounds with eap_workaround=0. + +# Example blocks: + +# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers +network={ + ssid="simple" + psk="very secret passphrase" + priority=5 +} + +# Same as previous, but request SSID-specific scanning (for APs that reject +# broadcast SSID) +network={ + ssid="second ssid" + scan_ssid=1 + psk="very secret passphrase" + priority=2 +} + +# Only WPA-PSK is used. Any valid cipher combination is accepted. +network={ + ssid="example" + proto=WPA + key_mgmt=WPA-PSK + pairwise=CCMP TKIP + group=CCMP TKIP WEP104 WEP40 + psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb + priority=2 +} + +# Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104 +# or WEP40 as the group cipher will not be accepted. +network={ + ssid="example" + proto=RSN + key_mgmt=WPA-EAP + pairwise=CCMP TKIP + group=CCMP TKIP + eap=TLS + identity="user@example.com" + ca_cert="/etc/cert/ca.pem" + client_cert="/etc/cert/user.pem" + private_key="/etc/cert/user.prv" + private_key_passwd="password" + priority=1 +} + +# EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel +# (e.g., Radiator) +network={ + ssid="example" + key_mgmt=WPA-EAP + eap=PEAP + identity="user@example.com" + password="foobar" + ca_cert="/etc/cert/ca.pem" + phase1="peaplabel=1" + phase2="auth=MSCHAPV2" + priority=10 +} + +# EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the +# unencrypted use. Real identity is sent only within an encrypted TLS tunnel. +network={ + ssid="example" + key_mgmt=WPA-EAP + eap=TTLS + identity="user@example.com" + anonymous_identity="anonymous@example.com" + password="foobar" + ca_cert="/etc/cert/ca.pem" + priority=2 +} + +# EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted +# use. Real identity is sent only within an encrypted TLS tunnel. +network={ + ssid="example" + key_mgmt=WPA-EAP + eap=TTLS + identity="user@example.com" + anonymous_identity="anonymous@example.com" + password="foobar" + ca_cert="/etc/cert/ca.pem" + phase2="auth=MSCHAPV2" +} + +# WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner +# authentication. +network={ + ssid="example" + key_mgmt=WPA-EAP + eap=TTLS + # Phase1 / outer authentication + anonymous_identity="anonymous@example.com" + ca_cert="/etc/cert/ca.pem" + # Phase 2 / inner authentication + phase2="autheap=TLS" + ca_cert2="/etc/cert/ca2.pem" + client_cert2="/etc/cer/user.pem" + private_key2="/etc/cer/user.prv" + private_key2_passwd="password" + priority=2 +} + +# Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and +# group cipher. +network={ + ssid="example" + bssid=00:11:22:33:44:55 + proto=WPA RSN + key_mgmt=WPA-PSK WPA-EAP + pairwise=CCMP + group=CCMP + psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb +} + +# Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP +# and all valid ciphers. +network={ + ssid=00010203 + psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f +} + + +# IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using +# EAP-TLS for authentication and key generation; require both unicast and +# broadcast WEP keys. +network={ + ssid="1x-test" + key_mgmt=IEEE8021X + eap=TLS + identity="user@example.com" + ca_cert="/etc/cert/ca.pem" + client_cert="/etc/cert/user.pem" + private_key="/etc/cert/user.prv" + private_key_passwd="password" + eapol_flags=3 +} + + +# LEAP with dynamic WEP keys +network={ + ssid="leap-example" + key_mgmt=IEEE8021X + eap=LEAP + identity="user" + password="foobar" +} + +# Plaintext connection (no WPA, no IEEE 802.1X) +network={ + ssid="plaintext-test" + key_mgmt=NONE +} + + +# Shared WEP key connection (no WPA, no IEEE 802.1X) +network={ + ssid="static-wep-test" + key_mgmt=NONE + wep_key0="abcde" + wep_key1=0102030405 + wep_key2="1234567890123" + wep_tx_keyidx=0 + priority=5 +} + + +# Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key +# IEEE 802.11 authentication +network={ + ssid="static-wep-test2" + key_mgmt=NONE + wep_key0="abcde" + wep_key1=0102030405 + wep_key2="1234567890123" + wep_tx_keyidx=0 + priority=5 + auth_alg=SHARED +} + + +# IBSS/ad-hoc network with WPA-None/TKIP. +network={ + ssid="test adhoc" + mode=1 + proto=WPA + key_mgmt=WPA-NONE + pairwise=NONE + group=TKIP + psk="secret passphrase" +} + + +# Catch all example that allows more or less all configuration modes +network={ + ssid="example" + scan_ssid=1 + key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE + pairwise=CCMP TKIP + group=CCMP TKIP WEP104 WEP40 + psk="very secret passphrase" + eap=TTLS PEAP TLS + identity="user@example.com" + password="foobar" + ca_cert="/etc/cert/ca.pem" + client_cert="/etc/cert/user.pem" + private_key="/etc/cert/user.prv" + private_key_passwd="password" + phase1="peaplabel=0" +} + +# Example of EAP-TLS with smartcard (openssl engine) +network={ + ssid="example" + key_mgmt=WPA-EAP + eap=TLS + proto=RSN + pairwise=CCMP TKIP + group=CCMP TKIP + identity="user@example.com" + ca_cert="/etc/cert/ca.pem" + client_cert="/etc/cert/user.pem" + + engine=1 + + # The engine configured here must be available. Look at + # OpenSSL engine support in the global section. + # The key available through the engine must be the private key + # matching the client certificate configured above. + + # use the opensc engine + #engine_id="opensc" + #key_id="45" + + # use the pkcs11 engine + engine_id="pkcs11" + key_id="id_45" + + # Optional PIN configuration; this can be left out and PIN will be + # asked through the control interface + pin="1234" +} + +# Example configuration showing how to use an inlined blob as a CA certificate +# data instead of using external file +network={ + ssid="example" + key_mgmt=WPA-EAP + eap=TTLS + identity="user@example.com" + anonymous_identity="anonymous@example.com" + password="foobar" + ca_cert="blob://exampleblob" + priority=20 +} + +blob-base64-exampleblob={ +SGVsbG8gV29ybGQhCg== +} + + +# Wildcard match for SSID (plaintext APs only). This example select any +# open AP regardless of its SSID. +network={ + key_mgmt=NONE +} -- cgit v1.2.3-54-g00ecf