From b569aa0e0056a97b29577f5bda611ef3dd539db3 Mon Sep 17 00:00:00 2001 From: Mariano Lopez Date: Tue, 1 Nov 2016 07:48:16 +0000 Subject: oeqa/runtime/cases: Migrate runtime tests. This migrates current runtime test suite to be used with the new framework. [YOCTO #10234] (From OE-Core rev: b39c61f2d442c79d03b73e8ffd104996fcb2177e) Signed-off-by: Mariano Lopez Signed-off-by: Richard Purdie --- meta/lib/oeqa/runtime/cases/parselogs.py | 358 +++++++++++++++++++++++++++++++ 1 file changed, 358 insertions(+) create mode 100644 meta/lib/oeqa/runtime/cases/parselogs.py (limited to 'meta/lib/oeqa/runtime/cases/parselogs.py') diff --git a/meta/lib/oeqa/runtime/cases/parselogs.py b/meta/lib/oeqa/runtime/cases/parselogs.py new file mode 100644 index 0000000000..a53a3608bd --- /dev/null +++ b/meta/lib/oeqa/runtime/cases/parselogs.py @@ -0,0 +1,358 @@ +import os + +from subprocess import check_output +from shutil import rmtree +from oeqa.runtime.case import OERuntimeTestCase +from oeqa.core.decorator.depends import OETestDepends +from oeqa.core.decorator.oeid import OETestID +from oeqa.core.decorator.data import skipIfDataVar +from oeqa.runtime.decorator.package import OEHasPackage + +#in the future these lists could be moved outside of module +errors = ["error", "cannot", "can\'t", "failed"] + +common_errors = [ + "(WW) warning, (EE) error, (NI) not implemented, (??) unknown.", + "dma timeout", + "can\'t add hid device:", + "usbhid: probe of ", + "_OSC failed (AE_ERROR)", + "_OSC failed (AE_SUPPORT)", + "AE_ALREADY_EXISTS", + "ACPI _OSC request failed (AE_SUPPORT)", + "can\'t disable ASPM", + "Failed to load module \"vesa\"", + "Failed to load module vesa", + "Failed to load module \"modesetting\"", + "Failed to load module modesetting", + "Failed to load module \"glx\"", + "Failed to load module \"fbdev\"", + "Failed to load module fbdev", + "Failed to load module glx", + "[drm] Cannot find any crtc or sizes - going 1024x768", + "_OSC failed (AE_NOT_FOUND); disabling ASPM", + "Open ACPI failed (/var/run/acpid.socket) (No such file or directory)", + "NX (Execute Disable) protection cannot be enabled: non-PAE kernel!", + "hd.: possibly failed opcode", + 'NETLINK INITIALIZATION FAILED', + 'kernel: Cannot find map file', + 'omap_hwmod: debugss: _wait_target_disable failed', + 'VGA arbiter: cannot open kernel arbiter, no multi-card support', + 'Failed to find URL:http://ipv4.connman.net/online/status.html', + 'Online check failed for', + 'netlink init failed', + 'Fast TSC calibration', + "BAR 0-9", + "Failed to load module \"ati\"", + "controller can't do DEVSLP, turning off", + "stmmac_dvr_probe: warning: cannot get CSR clock", + "error: couldn\'t mount because of unsupported optional features", + "GPT: Use GNU Parted to correct GPT errors", + ] + +video_related = [ + "uvesafb", +] + +x86_common = [ + '[drm:psb_do_init] *ERROR* Debug is', + 'wrong ELF class', + 'Could not enable PowerButton event', + 'probe of LNXPWRBN:00 failed with error -22', + 'pmd_set_huge: Cannot satisfy', + 'failed to setup card detect gpio', + 'amd_nb: Cannot enumerate AMD northbridges', + 'failed to retrieve link info, disabling eDP', + 'Direct firmware load for iwlwifi', +] + common_errors + +qemux86_common = [ + 'wrong ELF class', + "fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.", + "can't claim BAR ", + 'amd_nb: Cannot enumerate AMD northbridges', + 'uvesafb: 5000 ms task timeout, infinitely waiting', + 'tsc: HPET/PMTIMER calibration failed', +] + common_errors + +ignore_errors = { + 'default' : common_errors, + 'qemux86' : [ + 'Failed to access perfctr msr (MSR', + 'pci 0000:00:00.0: [Firmware Bug]: reg 0x..: invalid BAR (can\'t size)', + ] + qemux86_common, + 'qemux86-64' : qemux86_common, + 'qemumips' : [ + 'Failed to load module "glx"', + 'pci 0000:00:00.0: [Firmware Bug]: reg 0x..: invalid BAR (can\'t size)', + ] + common_errors, + 'qemumips64' : [ + 'pci 0000:00:00.0: [Firmware Bug]: reg 0x..: invalid BAR (can\'t size)', + ] + common_errors, + 'qemuppc' : [ + 'PCI 0000:00 Cannot reserve Legacy IO [io 0x0000-0x0fff]', + 'host side 80-wire cable detection failed, limiting max speed', + 'mode "640x480" test failed', + 'Failed to load module "glx"', + 'can\'t handle BAR above 4GB', + 'Cannot reserve Legacy IO', + ] + common_errors, + 'qemuarm' : [ + 'mmci-pl18x: probe of fpga:05 failed with error -22', + 'mmci-pl18x: probe of fpga:0b failed with error -22', + 'Failed to load module "glx"', + 'OF: amba_device_add() failed (-19) for /amba/smc@10100000', + 'OF: amba_device_add() failed (-19) for /amba/mpmc@10110000', + 'OF: amba_device_add() failed (-19) for /amba/sctl@101e0000', + 'OF: amba_device_add() failed (-19) for /amba/watchdog@101e1000', + 'OF: amba_device_add() failed (-19) for /amba/sci@101f0000', + 'OF: amba_device_add() failed (-19) for /amba/ssp@101f4000', + 'OF: amba_device_add() failed (-19) for /amba/fpga/sci@a000', + 'Failed to initialize \'/amba/timer@101e3000\': -22', + 'jitterentropy: Initialization failed with host not compliant with requirements: 2', + ] + common_errors, + 'qemuarm64' : [ + 'Fatal server error:', + '(EE) Server terminated with error (1). Closing log file.', + 'dmi: Firmware registration failed.', + 'irq: type mismatch, failed to map hwirq-27 for /intc', + ] + common_errors, + 'emenlow' : [ + '[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness', + '(EE) Failed to load module "psb"', + '(EE) Failed to load module psb', + '(EE) Failed to load module "psbdrv"', + '(EE) Failed to load module psbdrv', + '(EE) open /dev/fb0: No such file or directory', + '(EE) AIGLX: reverting to software rendering', + ] + x86_common, + 'intel-core2-32' : [ + 'ACPI: No _BQC method, cannot determine initial brightness', + '[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness', + '(EE) Failed to load module "psb"', + '(EE) Failed to load module psb', + '(EE) Failed to load module "psbdrv"', + '(EE) Failed to load module psbdrv', + '(EE) open /dev/fb0: No such file or directory', + '(EE) AIGLX: reverting to software rendering', + 'dmi: Firmware registration failed.', + 'ioremap error for 0x78', + ] + x86_common, + 'intel-corei7-64' : [ + 'can\'t set Max Payload Size to 256', + 'intel_punit_ipc: can\'t request region for resource', + '[drm] parse error at position 4 in video mode \'efifb\'', + 'ACPI Error: Could not enable RealTimeClock event', + 'ACPI Warning: Could not enable fixed event - RealTimeClock', + 'hci_intel INT33E1:00: Unable to retrieve gpio', + 'hci_intel: probe of INT33E1:00 failed', + 'can\'t derive routing for PCI INT A', + 'failed to read out thermal zone', + 'Bluetooth: hci0: Setting Intel event mask failed', + 'ttyS2 - failed to request DMA', + ] + x86_common, + 'crownbay' : x86_common, + 'genericx86' : x86_common, + 'genericx86-64' : [ + 'Direct firmware load for i915', + 'Failed to load firmware i915', + 'Failed to fetch GuC', + 'Failed to initialize GuC', + 'Failed to load DMC firmware', + 'The driver is built-in, so to load the firmware you need to', + ] + x86_common, + 'edgerouter' : [ + 'Fatal server error:', + ] + common_errors, + 'jasperforest' : [ + 'Activated service \'org.bluez\' failed:', + 'Unable to find NFC netlink family', + ] + common_errors, +} + +log_locations = ["/var/log/","/var/log/dmesg", "/tmp/dmesg_output.log"] + +class ParseLogsTest(OERuntimeTestCase): + + @classmethod + def setUpClass(cls): + cls.errors = errors + + # When systemd is enabled we need to notice errors on + # circular dependencies in units. + if 'systemd' in cls.td.get('DISTRO_FEATURES', ''): + cls.errors.extend([ + 'Found ordering cycle on', + 'Breaking ordering cycle by deleting job', + 'deleted to break ordering cycle', + 'Ordering cycle found, skipping', + ]) + + cls.ignore_errors = ignore_errors + cls.log_locations = log_locations + cls.msg = '' + is_lsb, _ = cls.tc.target.run("which LSB_Test.sh") + if is_lsb == 0: + for machine in cls.ignore_errors: + cls.ignore_errors[machine] = cls.ignore_errors[machine] \ + + video_related + + def getMachine(self): + return self.td.get('MACHINE', '') + + def getWorkdir(self): + return self.td.get('WORKDIR', '') + + # Get some information on the CPU of the machine to display at the + # beginning of the output. This info might be useful in some cases. + def getHardwareInfo(self): + hwi = "" + cmd = ('cat /proc/cpuinfo | grep "model name" | head -n1 | ' + " awk 'BEGIN{FS=\":\"}{print $2}'") + _, cpu_name = self.target.run(cmd) + + cmd = ('cat /proc/cpuinfo | grep "cpu cores" | head -n1 | ' + "awk {'print $4'}") + _, cpu_physical_cores = self.target.run(cmd) + + cmd = 'cat /proc/cpuinfo | grep "processor" | wc -l' + _, cpu_logical_cores = self.target.run(cmd) + + _, cpu_arch = self.target.run('uname -m') + + hwi += 'Machine information: \n' + hwi += '*******************************\n' + hwi += 'Machine name: ' + self.getMachine() + '\n' + hwi += 'CPU: ' + str(cpu_name) + '\n' + hwi += 'Arch: ' + str(cpu_arch)+ '\n' + hwi += 'Physical cores: ' + str(cpu_physical_cores) + '\n' + hwi += 'Logical cores: ' + str(cpu_logical_cores) + '\n' + hwi += '*******************************\n' + + return hwi + + # Go through the log locations provided and if it's a folder + # create a list with all the .log files in it, if it's a file + # just add it to that list. + def getLogList(self, log_locations): + logs = [] + for location in log_locations: + status, _ = self.target.run('test -f ' + str(location)) + if status == 0: + logs.append(str(location)) + else: + status, _ = self.target.run('test -d ' + str(location)) + if status == 0: + cmd = 'find ' + str(location) + '/*.log -maxdepth 1 -type f' + status, output = self.target.run(cmd) + if status == 0: + output = output.splitlines() + for logfile in output: + logs.append(os.path.join(location, str(logfile))) + return logs + + # Copy the log files to be parsed locally + def transfer_logs(self, log_list): + workdir = self.getWorkdir() + self.target_logs = workdir + '/' + 'target_logs' + target_logs = self.target_logs + if os.path.exists(target_logs): + rmtree(self.target_logs) + os.makedirs(target_logs) + for f in log_list: + self.target.copyFrom(str(f), target_logs) + + # Get the local list of logs + def get_local_log_list(self, log_locations): + self.transfer_logs(self.getLogList(log_locations)) + list_dir = os.listdir(self.target_logs) + dir_files = [os.path.join(self.target_logs, f) for f in list_dir] + logs = [f for f in dir_files if os.path.isfile(f)] + return logs + + # Build the grep command to be used with filters and exclusions + def build_grepcmd(self, errors, ignore_errors, log): + grepcmd = 'grep ' + grepcmd += '-Ei "' + for error in errors: + grepcmd += error + '|' + grepcmd = grepcmd[:-1] + grepcmd += '" ' + str(log) + " | grep -Eiv \'" + + try: + errorlist = ignore_errors[self.getMachine()] + except KeyError: + self.msg += 'No ignore list found for this machine, using default\n' + errorlist = ignore_errors['default'] + + for ignore_error in errorlist: + ignore_error = ignore_error.replace('(', '\(') + ignore_error = ignore_error.replace(')', '\)') + ignore_error = ignore_error.replace("'", '.') + ignore_error = ignore_error.replace('?', '\?') + ignore_error = ignore_error.replace('[', '\[') + ignore_error = ignore_error.replace(']', '\]') + ignore_error = ignore_error.replace('*', '\*') + ignore_error = ignore_error.replace('0-9', '[0-9]') + grepcmd += ignore_error + '|' + grepcmd = grepcmd[:-1] + grepcmd += "\'" + + return grepcmd + + # Grep only the errors so that their context could be collected. + # Default context is 10 lines before and after the error itself + def parse_logs(self, errors, ignore_errors, logs, + lines_before = 10, lines_after = 10): + results = {} + rez = [] + grep_output = '' + + for log in logs: + result = None + thegrep = self.build_grepcmd(errors, ignore_errors, log) + + try: + result = check_output(thegrep, shell=True).decode('utf-8') + except: + pass + + if result is not None: + results[log.replace('target_logs/','')] = {} + rez = result.splitlines() + + for xrez in rez: + try: + cmd = ['grep', '-F', xrez, '-B', str(lines_before)] + cmd += ['-A', str(lines_after), log] + grep_output = check_output(cmd).decode('utf-8') + except: + pass + results[log.replace('target_logs/','')][xrez]=grep_output + + return results + + # Get the output of dmesg and write it in a file. + # This file is added to log_locations. + def write_dmesg(self): + (status, dmesg) = self.target.run('dmesg > /tmp/dmesg_output.log') + + @OETestID(1059) + @OETestDepends(['ssh.SSHTest.test_ssh']) + def test_parselogs(self): + self.write_dmesg() + log_list = self.get_local_log_list(self.log_locations) + result = self.parse_logs(self.errors, self.ignore_errors, log_list) + print(self.getHardwareInfo()) + errcount = 0 + for log in result: + self.msg += 'Log: ' + log + '\n' + self.msg += '-----------------------\n' + for error in result[log]: + errcount += 1 + self.msg += 'Central error: ' + str(error) + '\n' + self.msg += '***********************\n' + self.msg += result[str(log)][str(error)] + '\n' + self.msg += '***********************\n' + self.msg += '%s errors found in logs.' % errcount + self.assertEqual(errcount, 0, msg=self.msg) -- cgit v1.2.3-54-g00ecf