From c527fd1f14c27855a37f2e8ac5346ce8d940ced2 Mon Sep 17 00:00:00 2001 From: Tudor Florea Date: Thu, 16 Oct 2014 03:05:19 +0200 Subject: initial commit for Enea Linux 4.0-140929 Migrated from the internal git server on the daisy-enea-point-release branch Signed-off-by: Tudor Florea --- meta-yocto/conf/local.conf.sample.extended | 312 +++++++++++++++++++++++++++++ 1 file changed, 312 insertions(+) create mode 100644 meta-yocto/conf/local.conf.sample.extended (limited to 'meta-yocto/conf/local.conf.sample.extended') diff --git a/meta-yocto/conf/local.conf.sample.extended b/meta-yocto/conf/local.conf.sample.extended new file mode 100644 index 0000000000..a1f24649a3 --- /dev/null +++ b/meta-yocto/conf/local.conf.sample.extended @@ -0,0 +1,312 @@ +# BBMASK is a regular expression that can be used to tell BitBake to ignore +# certain recipes. +#BBMASK = "" + +# eglibc configurability is used to reduce minimal image's size. +# the all supported eglibc options are listed in DISTRO_FEATURES_LIBC +# and disabled by default. Uncomment and copy the DISTRO_FEATURES_LIBC +# and DISTRO_FEATURES definitions to local.conf to enable the options. +#DISTRO_FEATURES_LIBC = "ipv6 libc-backtrace libc-big-macros libc-bsd libc-cxx-tests libc-catgets libc-charsets libc-crypt \ +# libc-crypt-ufc libc-db-aliases libc-envz libc-fcvt libc-fmtmsg libc-fstab libc-ftraverse \ +# libc-getlogin libc-idn libc-inet libc-inet-anl libc-libm libc-locales libc-locale-code \ +# libc-memusage libc-nis libc-nsswitch libc-rcmd libc-rtld-debug libc-spawn libc-streams libc-sunrpc \ +# libc-utmp libc-utmpx libc-wordexp libc-posix-clang-wchar libc-posix-regexp libc-posix-regexp-glibc \ +# libc-posix-wchar-io" + +#DISTRO_FEATURES = "alsa bluetooth ext2 irda pcmcia usbgadget usbhost wifi nfs zeroconf pci ${DISTRO_FEATURES_LIBC}" + +# If you want to get an image based on directfb without x11, Please copy this variable to build/conf/local.conf +#DISTRO_FEATURES = "alsa argp bluetooth ext2 irda largefile pcmcia usbgadget usbhost wifi xattr nfs zeroconf pci 3g directfb ${DISTRO_FEATURES_LIBC}" + +# ENABLE_BINARY_LOCALE_GENERATION controls the generation of binary locale +# packages at build time using qemu-native. Disabling it (by setting it to 0) +# will save some build time at the expense of breaking i18n on devices with +# less than 128MB RAM. +#ENABLE_BINARY_LOCALE_GENERATION = "1" + +# Set GLIBC_GENERATE_LOCALES to the locales you wish to generate should you not +# wish to perform the time-consuming step of generating all LIBC locales. +# NOTE: If removing en_US.UTF-8 you will also need to uncomment, and set +# appropriate values for IMAGE_LINGUAS and LIMIT_BUILT_LOCALES +# WARNING: this may break localisation! +#GLIBC_GENERATE_LOCALES = "en_GB.UTF-8 en_US.UTF-8" +# See message above as to whether setting these is required +#IMAGE_LINGUAS ?= "en-gb" +#LIMIT_BUILT_LOCALES ?= "POSIX en_GB" + +# The following are used to control options related to debugging. +# +# Uncomment this to change the optimization to make debugging easer, at the +# possible cost of performance. +# DEBUG_BUILD = "1" +# +# Uncomment this to disable the stripping of the installed binaries +# INHIBIT_PACKAGE_STRIP = "1" +# +# Uncomment this to disable the split of the debug information into -dbg files +# INHIBIT_PACKAGE_DEBUG_SPLIT = "1" +# +# When splitting debug information, the following controls the results of the +# file splitting. +# +# .debug (default): +# When splitting the debug information will be placed into +# a .debug directory in the same dirname of the binary produced: +# /bin/foo -> /bin/.debug/foo +# +# debug-file-directory: +# When splitting the debug information will be placed into +# a central debug-file-directory, /usr/lib/debug: +# /bin/foo -> /usr/lib/debug/bin/foo.debug +# +# Any source code referenced in the debug symbols will be copied +# and made available within the /usr/src/debug directory +# +#PACKAGE_DEBUG_SPLIT_STYLE = '.debug' +# PACKAGE_DEBUG_SPLIT_STYLE = 'debug-file-directory' + +# Uncomment these to build a package such that you can use gprof to profile it. +# NOTE: This will only work with 'linux' targets, not +# 'linux-uclibc', as uClibc doesn't provide the necessary +# object files. Also, don't build glibc itself with these +# flags, or it'll fail to build. +# +# PROFILE_OPTIMIZATION = "-pg" +# SELECTED_OPTIMIZATION = "${PROFILE_OPTIMIZATION}" +# LDFLAGS =+ "-pg" + +# TCMODE controls the characteristics of the generated packages/images by +# telling poky which toolchain 'profile' to use. +# +# The default is "default" which uses the internal toolchain. With +# additional layers, it is possible to set this to use a precompiled +# external toolchain. One example is the Sourcery G++ Toolchain, support +# for which is now in the separate meta-sourcery layer: +# +# http://github.com/MentorEmbedded/meta-sourcery/ +# +# meta-sourcery can be used as a template for adding support for other +# external toolchains. See the link above for further details. +# +# TCMODE points the system to a file in conf/distro/include/tcmode-${TCMODE}.inc, +# so for meta-sourcery which has conf/distro/include/tcmode-external-sourcery.inc +# you would set it as follows: +# +# TCMODE ?= "external-sourcery" + +# mklibs library size optimization is more useful to smaller images, +# and less useful for bigger images. Also mklibs library optimization +# can break the ABI compatibility, so should not be applied to the +# images which are to be extended or upgraded later. +#This enabled mklibs library size optimization just for the specified image. +#MKLIBS_OPTIMIZED_IMAGES ?= "core-image-minimal" +#This enable mklibs library size optimization will be for all the images. +#MKLIBS_OPTIMIZED_IMAGES ?= "all" + +# Uncomment this if your host distribution provides the help2man tool. +#ASSUME_PROVIDED += "help2man-native" + +# This value is currently used by pseudo to determine if the recipe should +# build both the 32-bit and 64-bit wrapper libraries on a 64-bit build system. +# +# Pseudo will attempt to determine if a 32-bit wrapper is necessary, but +# it doesn't always guess properly. If you have 32-bit executables on +# your 64-bit build system, you likely want to set this to "0", +# otherwise you could end up with incorrect file attributes on the +# target filesystem. +# +# Default is to not build 32 bit libs on 64 bit systems, uncomment this +# if you need the 32 bits libs +#NO32LIBS = "0" + +# Uncomment the following lines to enable multilib builds +#require conf/multilib.conf +#MULTILIBS = "multilib:lib32" +#DEFAULTTUNE_virtclass-multilib-lib32 = "x86" + +# The network based PR service host and port +# Uncomment the following lines to enable PRservice. +# Set PRSERV_HOST to 'localhost:0' to automatically +# start local PRService. +# Set to other values to use remote PRService. +#PRSERV_HOST = "localhost:0" + +# Additional image generation features +# +# The following is a list of classes to import to use in the generation of images +# currently an example class is image_types_uboot +# IMAGE_CLASSES = " image_types_uboot" + +# Incremental rpm image generation, the rootfs would be totally removed +# and re-created in the second generation by default, but with +# INC_RPM_IMAGE_GEN = "1", the rpm based rootfs would be kept, and will +# do update(remove/add some pkgs) on it. NOTE: This is not suggested +# when you want to create a productive rootfs +#INC_RPM_IMAGE_GEN = "1" + +# This is a list of packages that require a commercial license to ship +# product. If shipped as part of an image these packages may have +# implications so they are disabled by default. To enable them, +# un-comment the below as appropriate. +#LICENSE_FLAGS_WHITELIST = "commercial_gst-fluendo-mp3 \ +# commercial_gst-openmax \ +# commercial_gst-plugins-ugly \ +# commercial_lame \ +# commercial_libmad \ +# commercial_libomxil \ +# commercial_mpeg2dec \ +# commercial_qmmp" + + +# +# Disk space monitor, take action when the disk space or the amount of +# inode is running low, it is enabled when BB_DISKMON_DIRS is set. +# +# Set the directory for the monitor, the format is: +# "action,directory,minimum_space,minimum_free_inode" +# +# The "action" must be set and should be one of: +# ABORT: Immediately abort +# STOPTASKS: The new tasks can't be executed any more, will stop the build +# when the running tasks have been done. +# WARN: show warnings (see BB_DISKMON_WARNINTERVAL for more information) +# +# The "directory" must be set, any directory is OK. +# +# Either "minimum_space" or "minimum_free_inode" (or both of them) +# should be set, otherwise the monitor would not be enabled, +# the unit can be G, M, K or none, but do NOT use GB, MB or KB +# (B is not needed). +#BB_DISKMON_DIRS = "STOPTASKS,${TMPDIR},1G,100K WARN,${SSTATE_DIR},1G,100K" +# +# Set disk space and inode interval (only works when the action is "WARN", +# the unit can be G, M, or K, but do NOT use the GB, MB or KB +# (B is not needed), the format is: +# "disk_space_interval,disk_inode_interval", the default value is +# "50M,5K" which means that it would warn when the free space is +# lower than the minimum space(or inode), and would repeat the warning +# when the disk space reduces 50M (or the amount of inode reduces 5k). +#BB_DISKMON_WARNINTERVAL = "50M,5K" + +# Archive the source and put them to ${DEPLOY_DIR}/sources/. +# +#INHERIT += "archiver" +# +# The tarball for the patched source will be created by default, and you +# can configure the archiver as follow: +# +# Create archive for: +# 1) original (or unpacked) source: +#ARCHIVER_MODE[src] = "original" +# 2) patched source: (default) +#ARCHIVER_MODE[src] = "patched" +# 3) configured source: +#ARCHIVER_MODE[src] = "configured" +# +# 4) the patches between do_unpack and do_patch: +#ARCHIVER_MODE[diff] = "1" +# set the files that you'd like to exclude from the diff: +#ARCHIVER_MODE[diff-exclude] ?= ".pc autom4te.cache patches" +# +# 5) the environment data, similar to 'bitbake -e recipe': +#ARCHIVER_MODE[dumpdata] = "1" +# +# 6) the recipe (.bb and .inc): +#ARCHIVER_MODE[recipe] = "1" +# +# 7) Whether output the .src.rpm package: +#ARCHIVER_MODE[srpm] = "1" +# +# 8) Filter the license, the recipe whose license in +# COPYLEFT_LICENSE_INCLUDE will be included, and in +# COPYLEFT_LICENSE_EXCLUDE will be excluded. +#COPYLEFT_LICENSE_INCLUDE = 'GPL* LGPL*' +#COPYLEFT_LICENSE_EXCLUDE = 'CLOSED Proprietary' +# +# 9) Config the recipe type that will be archived, the type can be +# target, native, nativesdk, cross, crosssdk and cross-canadian, +# you can set one or more types. Archive all types by default. +#COPYLEFT_RECIPE_TYPES = 'target' +# + +# Remove the old image before the new one generated to save disk space +#RM_OLD_IMAGE = "1" + +# +# GCC/LD FLAGS to enable more secure code generation +# +# By including the security_flags include file you enable flags +# to the compiler and linker that cause them to generate more secure +# code, this is enabled by default in the poky-lsb distro. +# This does affect compile speed slightly. +# +# Use the following line to enable the security compiler and linker flags to your build +#require conf/distro/include/security_flags.inc + +# Image level user/group configuration. +# Inherit extrausers to make the setting of EXTRA_USERS_PARAMS effective. +#INHERIT += "extrausers" +# User / group settings +# The settings are sperated by the ; character. +# Each setting is actually a command. The supported commands are useradd, +# groupadd, userdel, groupdel, usermod and groupmod. +#EXTRA_USERS_PARAMS = "\ +#useradd -p '' tester; \ +#groupadd developers; \ +#userdel nobody; \ +#groupdel -g video; \ +#groupmod -g 1020 developers; \ +#usermod -s /bin/sh tester; \ +#" + +# Various packages dynamically add users and groups to the system at package +# install time. For programs that do not care what the uid/gid is of the +# resulting users/groups, the order of the install will determine the final +# uid/gid. This can lead to non-deterministic uid/gid values from one build +# to another. Use the following settings to specify that all user/group adds +# should be created based on a static passwd/group file. +# +# Note, if you enable or disable the useradd-staticids in a configured system, +# the TMPDIR may contain incorrect uid/gid values. Clearing the TMPDIR +# will correct this condition. +# +# By default the system looks in the BBPATH for files/passwd and files/group +# the default can be overriden by spefying USERADD_UID/GID_TABLES. +# +#USERADDEXTENSION = "useradd-staticids" +#USERADD_UID_TABLES = "files/passwd" +#USERADD_GID_TABLES = "files/group" +# +# In order to prevent generating a system where a dynamicly assigned uid/gid +# can exist, you should enable the following setting. This will force the +# system to error out if the user/group name is not defined in the +# files/passwd or files/group (or specified replacements.) +#USERADD_ERROR_DYNAMIC = "1" + +# Enabling FORTRAN +# Note this is not officially supported and is just illustrated here to +# show an example of how it can be done +# You'll also need your fortran recipe to depend on libgfortran +#FORTRAN_forcevariable = ",fortran" +#RUNTIMETARGET_append_pn-gcc-runtime = " libquadmath" + +# +# Kernel image features +# +# The INITRAMFS_IMAGE image variable will cause an additional recipe to +# be built as a dependency to the what ever rootfs recipe you might be +# using such as core-image-sato. The initramfs might be needed for +# the initial boot of of the target system such as to load kernel +# modules prior to mounting the root file system. +# +# INITRAMFS_IMAGE_BUNDLE variable controls if the image recipe +# specified by the INITRAMFS_IMAGE will be run through an extra pass +# through the kernel compilation in order to build a single binary +# which contains both the kernel image and the initramfs. The +# combined binary will be deposited into the tmp/deploy directory. +# NOTE: You can set INITRAMFS_IMAGE in an image recipe, but +# INITRAMFS_IMAGE_BUNDLE can only be set in a conf file. +# +#INITRAMFS_IMAGE = "core-image-minimal-initramfs" +#INITRAMFS_IMAGE_BUNDLE = "1" + -- cgit v1.2.3-54-g00ecf