From 320a2206e0b1a745f0c9d3557c59e49779a96a7e Mon Sep 17 00:00:00 2001 From: Scott Rifenbark Date: Mon, 27 Apr 2015 08:15:56 -0700 Subject: dev-manual; ref-manual: Fixed ‐ issue Fixes [YOCTO #7386] Apparently the "‐" ENTITY used throughout the YP manual set to get literal "-" characters in example commands renders into a unicode that is not a dash. This results in users getting errors if they attempt to cut-and-paste a sample command that uses a "-" character from the manual into a shell. I have universally replaced all the "‐" strings in the YP manual set to "-" strings. (From yocto-docs rev: 1309e124d83fdf3c98be5c3ff1943f1c0d496c20) Signed-off-by: Scott Rifenbark Signed-off-by: Richard Purdie --- .../dev-manual/dev-manual-common-tasks.xml | 126 ++++++++++----------- documentation/ref-manual/ref-classes.xml | 6 +- 2 files changed, 66 insertions(+), 66 deletions(-) (limited to 'documentation') diff --git a/documentation/dev-manual/dev-manual-common-tasks.xml b/documentation/dev-manual/dev-manual-common-tasks.xml index aeda1febe9..7a28176ce0 100644 --- a/documentation/dev-manual/dev-manual-common-tasks.xml +++ b/documentation/dev-manual/dev-manual-common-tasks.xml @@ -736,13 +736,13 @@ ... DESCRIPTION = "A useful utility" ... - EXTRA_OECONF = "‐‐enable-something" + EXTRA_OECONF = "--enable-something" ... #### bbappended from meta-anotherlayer #### DESCRIPTION = "Customized utility" - EXTRA_OECONF += "‐‐enable-somethingelse" + EXTRA_OECONF += "--enable-somethingelse" Ideally, you would tidy up these utilities as follows: @@ -750,7 +750,7 @@ ... DESCRIPTION = "Customized utility" ... - EXTRA_OECONF = "‐‐enable-something ‐‐enable-somethingelse" + EXTRA_OECONF = "--enable-something --enable-somethingelse" ... @@ -2322,7 +2322,7 @@ configure script with the appropriate options. For the case involving a custom configure script, you would run - ./configure ‐‐help and look for + ./configure --help and look for the options you need to set. @@ -2345,7 +2345,7 @@ configure script as needed. For reference information on configure options specific to the software you are building, you can consult the output of the - ./configure ‐‐help command within + ./configure --help command within ${S} or consult the software's upstream documentation. @@ -3827,7 +3827,7 @@ or by entering the command with a help argument as follows: $ wic -h - $ wic ‐‐help + $ wic --help @@ -3843,7 +3843,7 @@ You can also get detailed help on a number of topics from the help system. - The output of wic ‐‐help + The output of wic --help displays a list of available help topics under a "Help topics" heading. You can have the help system display the help text for @@ -3913,38 +3913,38 @@ your own custom file or use a file from a set of existing files as described by further options. - -o OUTDIR, ‐‐outdir=OUTDIR + -o OUTDIR, --outdir=OUTDIR The name of a directory in which to create image. - -i PROPERTIES_FILE, ‐‐infile=PROPERTIES_FILE + -i PROPERTIES_FILE, --infile=PROPERTIES_FILE The name of a file containing the values for image properties as a JSON file. - -e IMAGE_NAME, ‐‐image-name=IMAGE_NAME + -e IMAGE_NAME, --image-name=IMAGE_NAME The name of the image from which to use the artifacts (e.g. core-image-sato). - -r ROOTFS_DIR, ‐‐rootfs-dir=ROOTFS_DIR + -r ROOTFS_DIR, --rootfs-dir=ROOTFS_DIR The path to the /rootfs directory to use as the .wks rootfs source. - -b BOOTIMG_DIR, ‐‐bootimg-dir=BOOTIMG_DIR + -b BOOTIMG_DIR, --bootimg-dir=BOOTIMG_DIR The path to the directory containing the boot artifacts (e.g. /EFI or /syslinux) to use as the .wks bootimg source. - -k KERNEL_DIR, ‐‐kernel-dir=KERNEL_DIR + -k KERNEL_DIR, --kernel-dir=KERNEL_DIR The path to the directory containing the kernel to use in the .wks boot image. - -n NATIVE_SYSROOT, ‐‐native-sysroot=NATIVE_SYSROOT + -n NATIVE_SYSROOT, --native-sysroot=NATIVE_SYSROOT The path to the native sysroot containing the tools to use to build the image. - -s, ‐‐skip-build-check + -s, --skip-build-check Skips the build check. - -D, ‐‐debug + -D, --debug Output debug information. @@ -4154,13 +4154,13 @@ Next, the example modifies the directdisksdb.wks file and changes all - instances of "‐‐ondisk sda" - to "‐‐ondisk sdb". + instances of "--ondisk sda" + to "--ondisk sdb". The example changes the following two lines and leaves the remaining lines untouched: - part /boot ‐‐source bootimg-pcbios ‐‐ondisk sdb ‐‐label boot ‐‐active ‐‐align 1024 - part / ‐‐source rootfs ‐‐ondisk sdb ‐‐fstype=ext3 ‐‐label platform ‐‐align 1024 + part /boot --source bootimg-pcbios --ondisk sdb --label boot --active --align 1024 + part / --source rootfs --ondisk sdb --fstype=ext3 --label platform --align 1024 Once the lines are changed, the example generates the directdisksdb image. @@ -4247,11 +4247,11 @@ somewhere other than the default /var/tmp/wic directory: - $ wic create ~/test.wks -o /home/trz/testwic ‐‐rootfs-dir \ + $ wic create ~/test.wks -o /home/trz/testwic --rootfs-dir \ /home/trz/yocto/yocto-image/build/tmp/work/crownbay_noemgd-poky-linux/core-image-minimal/1.0-r0/rootfs \ - ‐‐bootimg-dir /home/trz/yocto/yocto-image/build/tmp/sysroots/crownbay-noemgd/usr/share \ - ‐‐kernel-dir /home/trz/yocto/yocto-image/build/tmp/sysroots/crownbay-noemgd/usr/src/kernel \ - ‐‐native-sysroot /home/trz/yocto/yocto-image/build/tmp/sysroots/x86_64-linux + --bootimg-dir /home/trz/yocto/yocto-image/build/tmp/sysroots/crownbay-noemgd/usr/share \ + --kernel-dir /home/trz/yocto/yocto-image/build/tmp/sysroots/crownbay-noemgd/usr/src/kernel \ + --native-sysroot /home/trz/yocto/yocto-image/build/tmp/sysroots/x86_64-linux Creating image(s)... @@ -4294,7 +4294,7 @@ partitions. The plugins provide a mechanism for mapping values specified in .wks files using the - ‐‐source keyword to a + --source keyword to a particular plugin implementation that populates a corresponding partition. @@ -4323,11 +4323,11 @@ When the wic implementation needs to invoke a partition-specific implementation, it looks for the plugin that has the same name as the - ‐‐source parameter given to + --source parameter given to that partition. For example, if the partition is set up as follows: - part /boot ‐‐source bootimg-pcbios ... + part /boot --source bootimg-pcbios ... The methods defined as class members of the plugin having the matching bootimg-pcbios.name @@ -4337,7 +4337,7 @@ To be more concrete, here is the plugin definition that matches a - ‐‐source bootimg-pcbios usage, + --source bootimg-pcbios usage, along with an example method called by the wic implementation when it needs to invoke an implementation-specific @@ -4359,7 +4359,7 @@ The SourcePlugin class defines the following methods, which is the current set of methods that can be implemented or overridden by - ‐‐source plugins. + --source plugins. Any methods not implemented by a SourcePlugin subclass inherit the implementations present in the @@ -4491,13 +4491,13 @@ Following are the supported options: - ‐‐size: + --size: The minimum partition size in MBytes. Specify an integer value such as 500. Do not append the number with "MB". You do not need this option if you use - ‐‐source. - ‐‐source: + --source. + --source: This option is a wic-specific option that names the source of the data that populates @@ -4509,7 +4509,7 @@ "Plugins" section. If you use - ‐‐source rootfs, + --source rootfs, wic creates a partition as large as needed and to fill it with the contents of the root filesystem pointed to by the @@ -4519,14 +4519,14 @@ option. The filesystem type used to create the partition is driven by the value of the - ‐‐fstype option + --fstype option specified for the partition. See the entry on - ‐‐fstype that + --fstype that follows for more information. If you use - ‐‐source plugin-name, + --source plugin-name, wic creates a partition as large as needed and fills it with the contents of the partition that is generated by the @@ -4539,10 +4539,10 @@ filesystem type end up being are dependent on the given plugin implementation. - ‐‐ondisk or ‐‐ondrive: + --ondisk or --ondrive: Forces the partition to be created on a particular disk. - ‐‐fstype: + --fstype: Sets the file system type for the partition. Valid values are: @@ -4559,7 +4559,7 @@ swap - ‐‐fsoptions: + --fsoptions: Specifies a free-form string of options to be used when mounting the filesystem. This string will be copied into the @@ -4569,15 +4569,15 @@ If not specified, the default string is "defaults". - ‐‐label label: + --label label: Specifies the label to give to the filesystem to be made on the partition. If the given label is already in use by another filesystem, a new label is created for the partition. - ‐‐active: + --active: Marks the partition as active. - ‐‐align (in KBytes): + --align (in KBytes): This option is a wic-specific option that says to start a partition on an x KBytes boundary. @@ -4594,17 +4594,17 @@ Bootloader functionality and boot partitions are implemented by the various - ‐‐source + --source plugins that implement bootloader functionality. The bootloader command essentially provides a means of modifying bootloader configuration. - ‐‐timeout: + --timeout: Specifies the number of seconds before the bootloader times out and boots the default option. - ‐‐append: + --append: Specifies kernel parameters. These parameters will be added to the syslinux APPEND or @@ -6529,7 +6529,7 @@ For this scenario, you need to start the PR Service using the bitbake-prserv command: - bitbake-prserv ‐‐host ip ‐‐port port ‐‐start + bitbake-prserv --host ip --port port --start In addition to hand-starting the service, you need to update the local.conf file of each @@ -7181,9 +7181,9 @@ Given this example, issue the following commands on the target: - # smart channel ‐‐add all type=rpm-md baseurl=http://server.name/rpm/all - # smart channel ‐‐add i585 type=rpm-md baseurl=http://server.name/rpm/i586 - # smart channel ‐‐add qemux86 type=rpm-md baseurl=http://server.name/rpm/qemux86 + # smart channel --add all type=rpm-md baseurl=http://server.name/rpm/all + # smart channel --add i585 type=rpm-md baseurl=http://server.name/rpm/i586 + # smart channel --add qemux86 type=rpm-md baseurl=http://server.name/rpm/qemux86 Also from the target machine, fetch the repository information using this command: @@ -8633,13 +8633,13 @@ Consequently, running the tests on other machine means that you have to move the contents and call runexported.py with - "‐‐deploy-dir path" as + "--deploy-dir path" as follows: - ./runexported.py ‐‐deploy-dir /new/path/on/this/machine testdata.json + ./runexported.py --deploy-dir /new/path/on/this/machine testdata.json runexported.py accepts other arguments - as well as described using ‐‐help. + as well as described using --help. @@ -9099,7 +9099,7 @@ | DEBUG: SITE files ['endian-little', 'bit-32', 'ix86-common', 'common-linux', 'common-glibc', 'i586-linux', 'common'] | DEBUG: Executing shell function do_compile | NOTE: make -j 16 - | make ‐‐no-print-directory all-am + | make --no-print-directory all-am | /bin/mkdir -p include/near | /bin/mkdir -p include/near | /bin/mkdir -p include/near @@ -9140,7 +9140,7 @@ | ln -s /home/pokybuild/yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/work/i586-poky-linux/neard/ 0.14-r0/neard-0.14/include/dbus.h include/near/dbus.h | ./src/genbuiltin nfctype1 nfctype2 nfctype3 nfctype4 p2p > src/builtin.h - | i586-poky-linux-gcc -m32 -march=i586 ‐‐sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-x86/ + | i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-x86/ build/build/tmp/sysroots/qemux86 -DHAVE_CONFIG_H -I. -I./include -I./src -I./gdbus -I/home/pokybuild/ yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/sysroots/qemux86/usr/include/glib-2.0 -I/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-x86/build/build/tmp/sysroots/qemux86/usr/ @@ -9215,7 +9215,7 @@ Here is some abbreviated, sample output with the missing dependency clearly visible at the end: - i586-poky-linux-gcc -m32 -march=i586 ‐‐sysroot=/home/scott-lenovo/...... + i586-poky-linux-gcc -m32 -march=i586 --sysroot=/home/scott-lenovo/...... . . . @@ -9399,14 +9399,14 @@ - # opcontrol ‐‐reset - # opcontrol ‐‐start ‐‐separate=lib ‐‐no-vmlinux -c 5 + # opcontrol --reset + # opcontrol --start --separate=lib --no-vmlinux -c 5 . . [do whatever is being profiled] . . - # opcontrol ‐‐stop + # opcontrol --stop $ opreport -cl @@ -9419,7 +9419,7 @@ five levels deep. To profile the kernel, you would specify the - ‐‐vmlinux=/path/to/vmlinux option. + --vmlinux=/path/to/vmlinux option. The vmlinux file is usually in the source directory in the /boot/ directory and must match the running kernel. @@ -9482,7 +9482,7 @@ With this connection, you just need to run "oprofile-server" on the device. By default, OProfile listens on port 4224. - You can change the port using the ‐‐port command-line + You can change the port using the --port command-line option. @@ -9572,14 +9572,14 @@ If network access to the target is unavailable, you can generate an archive for processing in oprofile-viewer as follows: - # opcontrol ‐‐reset - # opcontrol ‐‐start ‐‐separate=lib ‐‐no-vmlinux -c 5 + # opcontrol --reset + # opcontrol --start --separate=lib --no-vmlinux -c 5 . . [do whatever is being profiled] . . - # opcontrol ‐‐stop + # opcontrol --stop # oparchive -o my_archive diff --git a/documentation/ref-manual/ref-classes.xml b/documentation/ref-manual/ref-classes.xml index 3889473b6e..880badda73 100644 --- a/documentation/ref-manual/ref-classes.xml +++ b/documentation/ref-manual/ref-classes.xml @@ -116,19 +116,19 @@ It's useful to have some idea of how the tasks defined by this class work and what they do behind the scenes. - do_configure ‐ + do_configure - Regenerates the configure script (using autoreconf) and then launches it with a standard set of arguments used during cross-compilation. You can pass additional parameters to configure through the EXTRA_OECONF variable. - do_compile ‐ Runs make with + do_compile - Runs make with arguments that specify the compiler and linker. You can pass additional arguments through the EXTRA_OEMAKE variable. - do_install ‐ Runs make install + do_install - Runs make install and passes in ${D} as DESTDIR. -- cgit v1.2.3-54-g00ecf