From 2375dda42b529743db3f6c0dd5a6e63e68ef1fb2 Mon Sep 17 00:00:00 2001 From: Nicolas Dechesne Date: Tue, 8 Sep 2020 14:31:58 +0200 Subject: sphinx: brief-yoctoprojectqs: fix up all remaining rendering issues Manual fix up for links, references, code-block, formatting issues.. (From yocto-docs rev: b0c5333c0f9321cdc1f46e1637cd5e9faf6b42a2) Signed-off-by: Nicolas Dechesne Signed-off-by: Richard Purdie --- .../brief-yoctoprojectqs/brief-yoctoprojectqs.rst | 363 ++++++++++++--------- 1 file changed, 212 insertions(+), 151 deletions(-) diff --git a/documentation/brief-yoctoprojectqs/brief-yoctoprojectqs.rst b/documentation/brief-yoctoprojectqs/brief-yoctoprojectqs.rst index 5da7de2ac2..456fab870c 100644 --- a/documentation/brief-yoctoprojectqs/brief-yoctoprojectqs.rst +++ b/documentation/brief-yoctoprojectqs/brief-yoctoprojectqs.rst @@ -16,12 +16,12 @@ build a reference embedded OS called Poky. - The examples in this paper assume you are using a native Linux system running a recent Ubuntu Linux distribution. If the machine - you want to use Yocto Project on to build an image (`build - host <&YOCTO_DOCS_REF_URL;#hardware-build-system-term>`__) is not + you want to use Yocto Project on to build an image + (:term:`Build Host`) is not a native Linux system, you can still perform these steps by using CROss PlatformS (CROPS) and setting up a Poky container. See the - `Setting Up to Use CROss PlatformS - (CROPS) <&YOCTO_DOCS_DEV_URL;#setting-up-to-use-crops>`__" section + :ref:`dev-manual/dev-manual-start:setting up to use cross platforms (crops)` + section in the Yocto Project Development Tasks Manual for more information. @@ -34,48 +34,41 @@ build a reference embedded OS called Poky. compatible but not officially supported nor validated with WSLv2, if you still decide to use WSL please upgrade to WSLv2. - See the `Setting Up to Use Windows Subsystem For - Linux <&YOCTO_DOCS_DEV_URL;#setting-up-to-use-wsl>`__" section in - the Yocto Project Development Tasks Manual for more information. + See the :ref:`dev-manual/dev-manual-start:setting up to use windows + subsystem for linux (wslv2)` section in the Yocto Project Development + Tasks Manual for more information. If you want more conceptual or background information on the Yocto -Project, see the `Yocto Project Overview and Concepts -Manual <&YOCTO_DOCS_OM_URL;>`__. +Project, see the :doc:`../overview-manual/overview-manual`. Compatible Linux Distribution ============================= -Make sure your `build -host <&YOCTO_DOCS_REF_URL;#hardware-build-system-term>`__ meets the +Make sure your :term:`Build Host` meets the following requirements: - 50 Gbytes of free disk space - Runs a supported Linux distribution (i.e. recent releases of Fedora, openSUSE, CentOS, Debian, or Ubuntu). For a list of Linux - distributions that support the Yocto Project, see the "`Supported - Linux - Distributions <&YOCTO_DOCS_REF_URL;#detailed-supported-distros>`__" + distributions that support the Yocto Project, see the + :ref:`ref-manual/ref-system-requirements:supported linux distributions` section in the Yocto Project Reference Manual. For detailed - information on preparing your build host, see the "`Preparing the - Build Host <&YOCTO_DOCS_DEV_URL;#dev-preparing-the-build-host>`__" + information on preparing your build host, see the + :ref:`dev-manual/dev-manual-start:preparing the build host` section in the Yocto Project Development Tasks Manual. -- +- - Git 1.8.3.1 or greater - - tar 1.28 or greater - - Python 3.5.0 or greater. - - gcc 5.0 or greater. If your build host does not meet any of these three listed version requirements, you can take steps to prepare the system so that you - can still use the Yocto Project. See the "`Required Git, tar, Python - and gcc - Versions <&YOCTO_DOCS_REF_URL;#required-git-tar-python-and-gcc-versions>`__" + can still use the Yocto Project. See the + :ref:`ref-manual/ref-system-requirements:required git, tar, python and gcc versions` section in the Yocto Project Reference Manual for information. Build Host Packages @@ -88,38 +81,71 @@ distribution: .. note:: For host package requirements on all supported Linux distributions, - see the " - Required Packages for the Build Host - " section in the Yocto Project Reference Manual. + see the :ref:`ref-manual/ref-system-requirements:required packages for the build host` + section in the Yocto Project Reference Manual. -$ sudo apt-get install UBUNTU_HOST_PACKAGES_ESSENTIAL +.. code-block:: shell + + $ sudo apt-get install &UBUNTU_HOST_PACKAGES_ESSENTIAL; Use Git to Clone Poky ===================== Once you complete the setup instructions for your machine, you need to get a copy of the Poky repository on your build host. Use the following -commands to clone the Poky repository. $ git clone -git://git.yoctoproject.org/poky Cloning into 'poky'... remote: Counting -objects: 432160, done. remote: Compressing objects: 100% -(102056/102056), done. remote: Total 432160 (delta 323116), reused -432037 (delta 323000) Receiving objects: 100% (432160/432160), 153.81 -MiB \| 8.54 MiB/s, done. Resolving deltas: 100% (323116/323116), done. -Checking connectivity... done. Move to the ``poky`` directory and take a -look at the tags: $ cd poky $ git fetch --tags $ git tag 1.1_M1.final -1.1_M1.rc1 1.1_M1.rc2 1.1_M2.final 1.1_M2.rc1 . . . yocto-2.5 -yocto-2.5.1 yocto-2.5.2 yocto-2.6 yocto-2.6.1 yocto-2.6.2 yocto-2.7 -yocto_1.5_M5.rc8 For this example, check out the branch based on the -DISTRO_REL_TAG release: $ git checkout tags/DISTRO_REL_TAG -b -my-DISTRO_REL_TAG Switched to a new branch 'my-DISTRO_REL_TAG' The -previous Git checkout command creates a local branch named -my-DISTRO_REL_TAG. The files available to you in that branch exactly -match the repository's files in the "DISTRO_NAME_NO_CAP" development -branch at the time of the Yocto Project DISTRO_REL_TAG release. +commands to clone the Poky repository. + +.. code-block:: shell + + $ git clone git://git.yoctoproject.org/poky + Cloning into 'poky'... + remote: Counting + objects: 432160, done. remote: Compressing objects: 100% + (102056/102056), done. remote: Total 432160 (delta 323116), reused + 432037 (delta 323000) Receiving objects: 100% (432160/432160), 153.81 MiB \| 8.54 MiB/s, done. + Resolving deltas: 100% (323116/323116), done. + Checking connectivity... done. + +Move to the ``poky`` directory and take a look at the tags: + +.. code-block:: shell + + $ cd poky + $ git fetch --tags + $ git tag + 1.1_M1.final + 1.1_M1.rc1 + 1.1_M1.rc2 + 1.1_M2.final + 1.1_M2.rc1 + . + . + . + yocto-2.5 + yocto-2.5.1 + yocto-2.5.2 + yocto-2.6 + yocto-2.6.1 + yocto-2.6.2 + yocto-2.7 + yocto_1.5_M5.rc8 + +For this example, check out the branch based on the +&DISTRO_REL_TAG; release: + +.. code-block:: shell + + $ git checkout tags/&DISTRO_REL_TAG; -b my-&DISTRO_REL_TAG; + Switched to a new branch 'my-&DISTRO_REL_TAG;' + +The previous Git checkout command creates a local branch named +my-&DISTRO_REL_TAG;. The files available to you in that branch exactly +match the repository's files in the "&DISTRO_NAME_NO_CAP;" development +branch at the time of the Yocto Project &DISTRO_REL_TAG; release. For more options and information about accessing Yocto Project related -repositories, see the "`Locating Yocto Project Source -Files <&YOCTO_DOCS_DEV_URL;#locating-yocto-project-source-files>`__" +repositories, see the +:ref:`dev-manual/dev-manual-start:locating yocto project source files` section in the Yocto Project Development Tasks Manual. Building Your Image @@ -142,35 +168,51 @@ an entire Linux distribution, including the toolchain, from source. ":yocto_wiki:`Working Behind a Network Proxy `" page of the Yocto Project Wiki. -1. *Initialize the Build Environment:* From within the ``poky`` - directory, run the - ````` <&YOCTO_DOCS_REF_URL;#structure-core-script>`__ environment +#. **Initialize the Build Environment:** From within the ``poky`` + directory, run the :ref:`ref-manual/ref-structure:\`\`oe-init-build-env\`\`` + environment setup script to define Yocto Project's build environment on your - build host. $ cd ~/poky $ source OE_INIT_FILE You had no - conf/local.conf file. This configuration file has therefore been - created for you with some default values. You may wish to edit it to, - for example, select a different MACHINE (target hardware). See - conf/local.conf for more information as common configuration options - are commented. You had no conf/bblayers.conf file. This configuration - file has therefore been created for you with some default values. To - add additional metadata layers into your configuration please add - entries to conf/bblayers.conf. The Yocto Project has extensive - documentation about OE including a reference manual which can be - found at: http://yoctoproject.org/documentation For more information - about OpenEmbedded see their website: http://www.openembedded.org/ - ### Shell environment set up for builds. ### You can now run 'bitbake - ' Common targets are: core-image-minimal core-image-sato - meta-toolchain meta-ide-support You can also run generated qemu - images with a command like 'runqemu qemux86-64' Among other things, - the script creates the - :term:`Build Directory`, which is - ``build`` in this case and is located in the :term:`Source Directory`. - After the - script runs, your current working directory is set to the Build - Directory. Later, when the build completes, the Build Directory - contains all the files created during the build. - -2. *Examine Your Local Configuration File:* When you set up the build + build host. + + .. code-block:: shell + + $ cd ~/poky + $ source &OE_INIT_FILE; + You had no conf/local.conf file. This configuration file has therefore been + created for you with some default values. You may wish to edit it to, for + example, select a different MACHINE (target hardware). See conf/local.conf + for more information as common configuration options are commented. + + You had no conf/bblayers.conf file. This configuration file has therefore + been created for you with some default values. To add additional metadata + layers into your configuration please add entries to conf/bblayers.conf. + + The Yocto Project has extensive documentation about OE including a reference + manual which can be found at: + http://yoctoproject.org/documentation + + For more information about OpenEmbedded see their website: + http://www.openembedded.org/ + + ### Shell environment set up for builds. ### + + You can now run 'bitbake ' + + Common targets are: + core-image-minimal + core-image-sato + meta-toolchain + meta-ide-support + + You can also run generated qemu images with a command like 'runqemu qemux86-64' + + Among other things, the script creates the :term:`Build Directory`, which is + ``build`` in this case and is located in the :term:`Source Directory`. After + the script runs, your current working directory is set to the Build + Directory. Later, when the build completes, the Build Directory contains all the + files created during the build. + +#. **Examine Your Local Configuration File:** When you set up the build environment, a local configuration file named ``local.conf`` becomes available in a ``conf`` subdirectory of the Build Directory. For this example, the defaults are set to build for a ``qemux86`` target, @@ -179,44 +221,47 @@ an entire Linux distribution, including the toolchain, from source. .. tip:: - You can significantly speed up your build and guard against - fetcher failures by using mirrors. To use mirrors, add these lines - to your - local.conf - file in the Build directory: - :: - - SSTATE_MIRRORS = "\ - file://.* http://sstate.yoctoproject.org/dev/PATH;downloadfilename=PATH \n \ - file://.* http://sstate.yoctoproject.org/YOCTO_DOC_VERSION_MINUS_ONE/PATH;downloadfilename=PATH \n \ - file://.* http://sstate.yoctoproject.org/YOCTO_DOC_VERSION/PATH;downloadfilename=PATH \n \ - " - - - The previous examples showed how to add sstate paths for Yocto - Project YOCTO_DOC_VERSION_MINUS_ONE, YOCTO_DOC_VERSION, and a - development area. For a complete index of sstate locations, see - . - -3. *Start the Build:* Continue with the following command to build an OS - image for the target, which is ``core-image-sato`` in this example: $ - bitbake core-image-sato For information on using the ``bitbake`` - command, see the - "`BitBake <&YOCTO_DOCS_OM_URL;#usingpoky-components-bitbake>`__" - section in the Yocto Project Overview and Concepts Manual, or see the - ":ref:`BitBake Command `" section - in the BitBake User Manual. - -4. *Simulate Your Image Using QEMU:* Once this particular image is + You can significantly speed up your build and guard against fetcher + failures by using mirrors. To use mirrors, add these lines to your + local.conf file in the Build directory: :: + + SSTATE_MIRRORS = "\ + file://.* http://sstate.yoctoproject.org/dev/PATH;downloadfilename=PATH \n \ + file://.* http://sstate.yoctoproject.org/&YOCTO_DOC_VERSION_MINUS_ONE;/PATH;downloadfilename=PATH \n \ + file://.* http://sstate.yoctoproject.org/&YOCTO_DOC_VERSION;/PATH;downloadfilename=PATH \n \ + " + + + The previous examples showed how to add sstate paths for Yocto Project + &YOCTO_DOC_VERSION_MINUS_ONE;, &YOCTO_DOC_VERSION;, and a development + area. For a complete index of sstate locations, see http://sstate.yoctoproject.org/. + +#. **Start the Build:** Continue with the following command to build an OS + image for the target, which is ``core-image-sato`` in this example: + + .. code-block:: shell + + $ bitbake core-image-sato + + For information on using the ``bitbake`` command, see the + :ref:`usingpoky-components-bitbake` section in the Yocto Project Overview and + Concepts Manual, or see the ":ref:`BitBake Command + `" section in the BitBake User Manual. + +#. **Simulate Your Image Using QEMU:** Once this particular image is built, you can start QEMU, which is a Quick EMUlator that ships with - the Yocto Project: $ runqemu qemux86-64 If you want to learn more - about running QEMU, see the "`Using the Quick EMUlator - (QEMU) <&YOCTO_DOCS_DEV_URL;#dev-manual-qemu>`__" chapter in the - Yocto Project Development Tasks Manual. + the Yocto Project: + + .. code-block:: shell + + $ runqemu qemux86-64 + + If you want to learn more about running QEMU, see the + :ref:`dev-manual/dev-manual-qemu:using the quick emulator (qemu)` chapter in + the Yocto Project Development Tasks Manual. -5. *Exit QEMU:* Exit QEMU by either clicking on the shutdown icon or by - typing ``Ctrl-C`` in the QEMU transcript window from which you evoked - QEMU. +#. **Exit QEMU:** Exit QEMU by either clicking on the shutdown icon or by typing + ``Ctrl-C`` in the QEMU transcript window from which you evoked QEMU. Customizing Your Build for Specific Hardware ============================================ @@ -237,25 +282,33 @@ modular development and makes it easier to reuse the layer metadata. Follow these steps to add a hardware layer: -1. *Find a Layer:* Lots of hardware layers exist. The Yocto Project +#. **Find a Layer:** Lots of hardware layers exist. The Yocto Project :yocto_git:`Source Repositories <>` has many hardware layers. This example adds the `meta-altera `__ hardware layer. -2. *Clone the Layer* Use Git to make a local copy of the layer on your +#. **Clone the Layer** Use Git to make a local copy of the layer on your machine. You can put the copy in the top level of the copy of the - Poky repository created earlier: $ cd ~/poky $ git clone - https://github.com/kraj/meta-altera.git Cloning into 'meta-altera'... - remote: Counting objects: 25170, done. remote: Compressing objects: - 100% (350/350), done. remote: Total 25170 (delta 645), reused 719 - (delta 538), pack-reused 24219 Receiving objects: 100% (25170/25170), - 41.02 MiB \| 1.64 MiB/s, done. Resolving deltas: 100% (13385/13385), - done. Checking connectivity... done. The hardware layer now exists + Poky repository created earlier: + + .. code-block:: shell + + $ cd ~/poky + $ git clone https://github.com/kraj/meta-altera.git + Cloning into 'meta-altera'... + remote: Counting objects: 25170, done. + remote: Compressing objects: 100% (350/350), done. + remote: Total 25170 (delta 645), reused 719 (delta 538), pack-reused 24219 + Receiving objects: 100% (25170/25170), 41.02 MiB \| 1.64 MiB/s, done. + Resolving deltas: 100% (13385/13385), done. + Checking connectivity... done. + + The hardware layer now exists with other layers inside the Poky reference repository on your build host as ``meta-altera`` and contains all the metadata needed to support hardware from Altera, which is owned by Intel. -3. *Change the Configuration to Build for a Specific Machine:* The +#. **Change the Configuration to Build for a Specific Machine:** The :term:`MACHINE` variable in the ``local.conf`` file specifies the machine for the build. For this example, set the ``MACHINE`` variable to "cyclone5". These @@ -264,25 +317,30 @@ Follow these steps to add a hardware layer: .. note:: - See the " - Examine Your Local Configuration File - " step earlier for more information on configuring the build. + See the "Examine Your Local Configuration File" step earlier for more + information on configuring the build. -4. *Add Your Layer to the Layer Configuration File:* Before you can use +#. **Add Your Layer to the Layer Configuration File:** Before you can use a layer during a build, you must add it to your ``bblayers.conf`` file, which is found in the :term:`Build Directory` ``conf`` directory. Use the ``bitbake-layers add-layer`` command to add the layer to the - configuration file: $ cd ~/poky/build $ bitbake-layers add-layer - ../meta-altera NOTE: Starting bitbake server... Parsing recipes: 100% - \|##################################################################\| - Time: 0:00:32 Parsing of 918 .bb files complete (0 cached, 918 - parsed). 1401 targets, 123 skipped, 0 masked, 0 errors. You can find - more information on adding layers in the "`Adding a Layer Using the - ``bitbake-layers`` - Script <&YOCTO_DOCS_DEV_URL;#adding-a-layer-using-the-bitbake-layers-script>`__" + configuration file: + + .. code-block:: shell + + $ cd ~/poky/build + $ bitbake-layers add-layer ../meta-altera + NOTE: Starting bitbake server... + Parsing recipes: 100% \|##################################################################\| Time: 0:00:32 + Parsing of 918 .bb files complete (0 cached, 918 parsed). 1401 targets, + 123 skipped, 0 masked, 0 errors. + + You can find + more information on adding layers in the + :ref:`dev-manual/dev-manual-common-tasks:adding a layer using the \`\`bitbake-layers\`\` script` section. Completing these steps has added the ``meta-altera`` layer to your Yocto @@ -293,9 +351,7 @@ Project development environment and configured it to build for the The previous steps are for demonstration purposes only. If you were to attempt to build an image for the "cyclone5" build, you should - read the Altera - README - . + read the Altera README. Creating Your Own General Layer =============================== @@ -308,12 +364,18 @@ configuration file, a ``recipes-example`` subdirectory that contains an ``example.bb`` recipe, a licensing file, and a ``README``. The following commands run the tool to create a layer named -``meta-mylayer`` in the ``poky`` directory: $ cd ~/poky $ bitbake-layers -create-layer meta-mylayer NOTE: Starting bitbake server... Add your new -layer with 'bitbake-layers add-layer meta-mylayer' For more information -on layers and how to create them, see the "`Creating a General Layer -Using the ``bitbake-layers`` -Script <&YOCTO_DOCS_DEV_URL;#creating-a-general-layer-using-the-bitbake-layers-script>`__" +``meta-mylayer`` in the ``poky`` directory: + +.. code-block:: shell + + $ cd ~/poky + $ bitbake-layers create-layer meta-mylayer + NOTE: Starting bitbake server... + Add your new layer with 'bitbake-layers add-layer meta-mylayer' + +For more information +on layers and how to create them, see the +:ref:`dev-manual/dev-manual-common-tasks:creating a general layer using the \`\`bitbake-layers\`\` script` section in the Yocto Project Development Tasks Manual. Where To Go Next @@ -323,39 +385,38 @@ Now that you have experienced using the Yocto Project, you might be asking yourself "What now?" The Yocto Project has many sources of information including the website, wiki pages, and user manuals: -- *Website:* The :yocto_home:`Yocto Project Website <>` provides +- **Website:** The :yocto_home:`Yocto Project Website <>` provides background information, the latest builds, breaking news, full development documentation, and access to a rich Yocto Project Development Community into which you can tap. -- *Developer Screencast:* The `Getting Started with the Yocto Project - +- **Developer Screencast:** The `Getting Started with the Yocto Project - New Developer Screencast Tutorial `__ provides a 30-minute video created for users unfamiliar with the Yocto Project but familiar with Linux build hosts. While this screencast is somewhat dated, the introductory and fundamental concepts are useful for the beginner. -- *Yocto Project Overview and Concepts Manual:* The `Yocto Project - Overview and Concepts Manual <&YOCTO_DOCS_OM_URL;>`__ is a great +- **Yocto Project Overview and Concepts Manual:** The + :doc:`../overview-manual/overview-manual` is a great place to start to learn about the Yocto Project. This manual introduces you to the Yocto Project and its development environment. The manual also provides conceptual information for various aspects of the Yocto Project. -- *Yocto Project Wiki:* The :yocto_wiki:`Yocto Project Wiki <>` +- **Yocto Project Wiki:** The :yocto_wiki:`Yocto Project Wiki <>` provides additional information on where to go next when ramping up with the Yocto Project, release information, project planning, and QA information. -- *Yocto Project Mailing Lists:* Related mailing lists provide a forum +- **Yocto Project Mailing Lists:** Related mailing lists provide a forum for discussion, patch submission and announcements. Several mailing lists exist and are grouped according to areas of concern. See the - "`Mailing lists <&YOCTO_DOCS_REF_URL;#resources-mailinglist>`__" + :ref:`ref-manual/resources:mailing lists` section in the Yocto Project Reference Manual for a complete list of Yocto Project mailing lists. -- *Comprehensive List of Links and Other Documentation:* The "`Links - and Related - Documentation <&YOCTO_DOCS_REF_URL;#resources-links-and-related-documentation>`__" +- **Comprehensive List of Links and Other Documentation:** The + :ref:`ref-manual/resources:links and related documentation` section in the Yocto Project Reference Manual provides a comprehensive list of all related links and other user documentation. -- cgit v1.2.3-54-g00ecf