summaryrefslogtreecommitdiffstats
path: root/meta
Commit message (Collapse)AuthorAgeFilesLines
* dnf: expand dnf selftest to test signed package feedsMarkus Lehtonen2017-08-161-1/+11
| | | | | | | | | [YOCTO #11209] (From OE-Core rev: 4d65421f381fc69397d7c61ba76488775e83e043) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa: fix dnf testsMarkus Lehtonen2017-08-161-1/+1
| | | | | | | | | | | | Rename one dnf runtime test that it will recognized as a python module and thus also found by the oe test loader. Also, fix value of TEST_SUITES in dnf selftest so that all test dependencies are satisfied and the runtime test may be successfully run from there. (From OE-Core rev: ee3be65aa1348798d385ead9b80c6a6ada21d6b0) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package_manager.py: enable dnf's repo_gpgcheck if feed signing is enabledMarkus Lehtonen2017-08-161-2/+8
| | | | | | | | | | | | | | If package feed signing is enabled enable repo gpg signature check for rpm repositories added via PACKAGE_FEED_URIS. This has the implication that all repositories added via this mechanism must be signed with the same key. [YOCTO #11209] (From OE-Core rev: f7716f1de0791dfe778bb70f1769a7e1e83c7a54) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sign_package_feed.bbclass: install signing key into rootfsMarkus Lehtonen2017-08-161-0/+3
| | | | | | | | | | | If package-management is enabled. [YOCTO #11209] (From OE-Core rev: 4f89a5629f876a833c0178d1ec687448d3ed8e71) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* signing-keys: delete unused tasksMarkus Lehtonen2017-08-161-0/+8
| | | | | | | | | | | | In particular, do_unpack needs to be deleted as it was causing missing subpackages. Do_unpack cleans the builddir and if it was run after do_get_public_keys it cleaned up all keys causing no packages to be built. (From OE-Core rev: 8fbe0d60322f1b02c1e9de1c6ab19648db97dbd9) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* dnf: rrecommend gnupgMarkus Lehtonen2017-08-161-0/+2
| | | | | | | | | | | | | This makes it possible to enable 'repo_gpgcheck' in dnf.conf. That is, do GPG signature check on repository metadata. Without gnupg dnf fails with "error: Invalid crypto engine." [YOCTO #11209] (From OE-Core rev: 8a7154cfe150840b451bc56951f0fa31cb8d6fa0) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oe/package_manager: re-implement rpm feed signingMarkus Lehtonen2017-08-161-1/+13
| | | | | | | | | [YOCTO #11209] (From OE-Core rev: 7a33426561ddc72296e33c5e7b8ca38763a7ab07) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* util-linux-native: Avoid use of getrandomRichard Purdie2017-08-162-0/+22
| | | | | | | | | | getrandom() is only available in glibc 2.25+ and uninative may relocate binaries onto systems that don't have this function. For now, force the code to the older codepath until we can come up with a better solution for this kind of issue. (From OE-Core rev: 95e31e4b15573eb1cbeb4ff1d0903c5141b84d54) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* python3-native: Avoid use of getentropy/getrandomRichard Purdie2017-08-161-1/+3
| | | | | | | | | | | getentropy/random() is only available in glibc 2.25+ and uninative may relocate binaries onto systems that don't have this function. For now, force the code to the older codepaths until we can come up with a better solution for this kind of issue. (From OE-Core rev: 92bda0024d85ae78345665cc2f9646c9881ed61b) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* packagefeed-stability.bbclass: change a bb.plain to bb.noteMing Liu2017-08-161-1/+1
| | | | | | | | | | | | I could see dozens of "Copying packages for recipe..." messages on the console during a image build, this is sort of annoying. I would like them to be dumped into the task log instead, so I can get a cleaner console and would not miss real important messages. (From OE-Core rev: 255caaad3574afec6ff5909c770eaee3f74a8155) Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest/tinfoil: Filter LogRecords in test_event_waitRichard Purdie2017-08-161-0/+3
| | | | | | | | | | As the code stands today, an event mask does not mask LogRecord events since the log levels are controlled separately. We therefore need to accept (and ignore) LogRecord events in this test to avoid errors. (From OE-Core rev: efe1f2c8ad09af3c5ee9c778601c7463c532b012) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* expat: Don't use getrandom() in the -native caseRichard Purdie2017-08-162-0/+26
| | | | | | | | | | | getrandom() is only available in glibc 2.25+ and uninative may relocate binaries onto systems that don't have this function. For now, force the code to the older codepath until we can come up with a better solution for this kind of issue. (From OE-Core rev: da9ac8092497c3f2c246d3534f47e42cb2d9e4e8) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* site/ix86-common: Drop ac_cv_sizeof_ino_t as it can be incorrect with large ↵Richard Purdie2017-08-163-3/+0
| | | | | | | | | | | | | | | | | file support Depending on whether large file support is enabled, the size of ino_t can be 4 or 8 on 32 bit x86. Drop the value from the site cache and allow the system to vary it depending on configuration. Very few other arches actually set this so its likely obsolete and doesn't need to be hardcoded anymore. Also drop the 64 bit and x32 variants since autodetection of this value appears to work fine and this avoids any confusion or sizing errors depending on large file support. (From OE-Core rev: 31ae16003cac6c8cf587c98d0c58e9f21690cb40) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* image.bbclass: support binary reproducibilityJuro Bystricky2017-08-161-1/+15
| | | | | | | | | | | | | | | | Added a new task "reproducible_final_image_task". If binary reproducibility is desired ($BUILD_REPRODUCIBLE_BINARIES" = "1"), then recursivley modify mtimes of all files to a reproducible vale. The value is obtained via REPRODUCIBLE_TIMESTAMP_ROOTFS. This task is executed as the very last step in image creation, once all the files in the image have been finalized. [YOCTO#11176] (From OE-Core rev: df8df5f907736c3e5b7f15ea11898a1d49726ca5) Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel.bbclass: improve reproducibilityJuro Bystricky2017-08-161-3/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several tweaks to improve reproducibility: 1. If BUILD_REPRODUCIBLE_BINARIES == 1, set KBUILD_BUILD_TIMESTAMP to a reproducible value. This is either a non-zero SOURCE_DATE_EPOCH, or the value obtained from top entry of GIT repo, or (if there is no GIT repo) fallback to REPRODUCIBLE_TIMESTAMP_ROOTFS as the last resort. Also export KCONFIG_NOTIMESTAMP=1. 2. When compressing vmlinux.gz, use gzip "-n" option 3. Kernel and kernel modules contain hard coded paths referencing the host build system. This is usually because the source code contains __FILE__ at some place. This prevents binary reproducibility. However, some compilers allow remapping of the __FILE__ value. If we detect the compiler is capable of doing this, we replace the source path $(S) part of __FILE__ by a string "/kernel-source". For example: ​/data/master/build/tmp/work-shared/qemux86/kernel-source/drivers/media/v4l2-core/videobuf2-core.​c will be replaced by a reproducible value: /kernel-source/drivers/media/v4l2-core/videobuf2-core.c. (From OE-Core rev: 012a70da7ae0617740cd0cf807d01c3cd912c823) Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* image-prelink.bbclass: support binary reproducibilityJuro Bystricky2017-08-161-1/+11
| | | | | | | | | | | | | | | Conditionally support binary reproducibility in built images. If BUILD_REPRODUCIBLE_BINARIES = 1 then: 1. Do not randomize library addresses 2. Set/export PRELINK_TIMESTAMP to a reproducible value. If REPRODUCIBLE_TIMESTAMP_ROOTFS is specified, then the value will be used. Otherwise the timestamp will be derived from the top git commit. (From OE-Core rev: 40ce3db222f8557a01d041f8115d531cc90a54e8) Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* busybox.inc: improve reproducibilityJuro Bystricky2017-08-161-0/+7
| | | | | | | | | | | | | | For reproducible builds do not generate build timestamp as part of the version string. Remove host tools references from .config file. With this patch all eight busybox packages are built as binary reproducible. (From OE-Core rev: fad94cdb02be86b463e691ca2598b393e7875919) Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* python3: improve reproducibilityJuro Bystricky2017-08-163-0/+99
| | | | | | | | | | | | | | | | The compiled .pyc files contain time stamp corresponding to the compile time. This prevents binary reproducibility. This patch allows to achieve binary reproducibility by overriding the build time stamp by the value exported via SOURCE_DATE_EPOCH. Patch by Bernhard M. Wiedemann. [YOCTO#11241] (From OE-Core rev: 2175aec10a764bfc925a3fb447547982d0ae662f) Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* u-boot: update nios2 device tree for 10m50 boardGan, Yau Wai2017-08-162-0/+29
| | | | | | | | | | | | | | | | In order for u-boot to work on Nios II architecture, the device tree file requires adding pre-relocation flag to the CPU node. Patch is tested on 10m50 board. Pass booting up Linux. [YOCTO #11628] (From OE-Core rev: 1e301a9f959fd3816d96cfdb6f8530898cefafce) Signed-off-by: Gan, Yau Wai <yau.wai.gan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* e2fsprogs-doc: binary reproducibleJuro Bystricky2017-08-162-0/+22
| | | | | | | | | | | When compressing by gzip, do not save the original file name and time stamp. [YOCTO #11916] (From OE-Core rev: c32d526a056adb8ed1eb8beb9d495bfd01af2342) Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* python3-docutils: update to 0.14Jose Lamego2017-08-161-3/+3
| | | | | | | | | | | | | | python3-docutils recipe must be upgraded to latest stable release. LIC_FILES_CHKSUM changed due to a typo fix from previous version, but license type and information remained the same. This change was tested on qemu with core-image-minimal. (From OE-Core rev: f99247335485e15c820991e3ea20b766364111fc) Signed-off-by: Jose Lamego <jose.a.lamego@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* python*-setuptools: update to 36.2.7Jose Lamego2017-08-163-2/+2
| | | | | | | | | | | | Both python-setuptools and python3-setuptools must be updated to latest stable release. These changes were tested on qemu with core-image-minimal (From OE-Core rev: 147d9260eb79edfdf7a91fb8bc3d915f141dc685) Signed-off-by: Jose Lamego <jose.a.lamego@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysstat: fix creating configuration file for /var/log/saChen Qi2017-08-161-3/+9
| | | | | | | | | | Fix to create configuration file related to /var/log/sa for sysvinit and systemd systems respectively. (From OE-Core rev: 652e515cbdf0f6314b63ec52b9fcac42299c3d60) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc: Handle .git not being a directoryJoshua Watt2017-08-161-3/+11
| | | | | | | | | | | | Use git rev-parse to determine the location of the .git directory, in case it is not an immediate child of EXTERNALSRC (e.g. when using submodules). In the event git can't resolve the .git directory, fall back to the non-git method for hashing. (From OE-Core rev: 95e1341b49f7184d280a03f64f131a4468a06867) Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* expat: Upgrade to 2.2.3Khem Raj2017-08-164-5/+23
| | | | | | | | (From OE-Core rev: d404d5574b0c270656fda4dc051babe82e8828a9) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Dengke Du <dengke.du@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* ltp: upgrade to upstream latest commit on 20170804Dengke Du2017-08-166-285/+115
| | | | | | | | | | | | | | | | | | | | | | | 1. Drop 4 patches because the upstream already contains them: 0001-dirtyc0w-Include-stdint.h.patch 0006-fix-PATH_MAX-undeclared-when-building-with-musl.patch 0037-faccessat-and-fchmodat-Fix-build-warnings.patch 0038-syscalls-add_key02-update-to-test-fix-for-nonempty-N.patch 2. Drop the do_compile_prepend function, because the upstream already fix the parallel make race, we can check it here: https://github.com/linux-test-project/ltp/commit/3f385652efe811fe7491474f8513baf44cf0a12d 3. Fix PAGE_SIZE redefinition and O_CREAT undeclear build failures when using musl 4. Fix runtime failed case file01 (From OE-Core rev: 46feafdc13b8c3c4b03d44a4a95a87d4ee25300c) Signed-off-by: Dengke Du <dengke.du@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* mesa: Fix build with vulkan on non-x86Jussi Kukkonen2017-08-161-1/+4
| | | | | | | | | | | | | The intel vulkan driver requires libdrm-intel: Only enable it when building for x86 or x86-64 similar to DRI drivers. Building on non-x86* with vulkan leads to "--with-vulkan-drivers= ": this is interpreted correctly by the build system. (From OE-Core rev: 8e50f002823772a989f0f39b0ecb8a84517c94f5) Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* image.bbclass: delete DATE variable tooStefan Agner2017-08-161-1/+2
| | | | | | | | | | | | | | | | | | | | When creating a custom image which uses the DATE variable the basehash seems to change every day and lead to errors such as: ERROR: console-tdx-image-2.7.6-r0 do_image_customimg: Error executing a python function in exec_python_func() autogenerated: The stack trace of python calls that resulted in this exception/failure was: File: 'exec_python_func() autogenerated', lineno: 2, function: <module> 0001: *** 0002:set_image_size(d) ... Add DATE to the variables which should not get expanded early and to the vardepsexclude list for the image task. (From OE-Core rev: 4af13a4855c74cea9cf6c168fd73165d7094bf93) Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* run-postinsts: do not reload daemon configurationMax Krummenacher2017-08-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case a systemd service disables itself while init is still in its boot sequence the reloading of the service files can be problematic. In that case: It seems that systemd looses the state of .device units, and some services depend on such units (namely serial consoles such as serial-getty@ttymxc0.service). As a result no getty is spawned on the affected serial tty. After a power-cycle the second boot (which does not disable services) succeeds. The following sequence shows this problem: | Jan 09 16:36:28 apalis-t30 systemctl[162]: Removed /etc/systemd/system/sysinit.target.wants/run-postinsts.service. | Jan 09 16:36:28 apalis-t30 systemd[1]: Reloading. | ... | And then the failing one: | Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start timed out. | Feb 22 15:33:15 apalis-t30 systemd[1]: Timed out waiting for device dev-ttyS0.device. | Feb 22 15:33:15 apalis-t30 systemd[1]: Dependency failed for Serial Getty on ttyS0. | Feb 22 15:33:15 apalis-t30 systemd[1]: serial-getty@ttyS0.service: Job serial-getty@ttyS0.service/start failed with result 'dependency'. | Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start failed with result 'timeout'. | Feb 22 15:33:15 apalis-t30 systemd[1]: Reached target Login Prompts. (the time has been updated between this two events, but that does not influence the issue) Using --no-reload in the service file avoids the "Reloading." message above and seems to not cause such issues anymore. Reported-by: Stefan Agner <stefan.agner@toradex.com> (From OE-Core rev: 23b359b6e26d0b17037bf955bd15a16a3fd9ab8f) Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> (cherry picked from commit 4a425d05bac5dcba023b67aa3d726f7e7869404f) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* opkg-configure: do not reload daemon configurationMax Krummenacher2017-08-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case a systemd service disables itself while init is still in its boot sequence the reloading of the service files can be problematic. In that case: It seems that systemd looses the state of .device units, and some services depend on such units (namely serial consoles such as serial-getty@ttymxc0.service). As a result no getty is spawned on the affected serial tty. After a power-cycle the second boot (which does not disable services) succeeds. The following sequence shows this problem: | Jan 09 16:36:28 apalis-t30 systemctl[162]: Removed /etc/systemd/system/sysinit.target.wants/run-postinsts.service. | Jan 09 16:36:28 apalis-t30 systemd[1]: Reloading. | ... | And then the failing one: | Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start timed out. | Feb 22 15:33:15 apalis-t30 systemd[1]: Timed out waiting for device dev-ttyS0.device. | Feb 22 15:33:15 apalis-t30 systemd[1]: Dependency failed for Serial Getty on ttyS0. | Feb 22 15:33:15 apalis-t30 systemd[1]: serial-getty@ttyS0.service: Job serial-getty@ttyS0.service/start failed with result 'dependency'. | Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start failed with result 'timeout'. | Feb 22 15:33:15 apalis-t30 systemd[1]: Reached target Login Prompts. (the time has been updated between this two events, but that does not influence the issue) Using --no-reload in the service file avoids the "Reloading." message above and seems to not cause such issues anymore. Reported-by: Stefan Agner <stefan.agner@toradex.com> (From OE-Core rev: 059bc9b164d239f0ba319f8e6a54b5edf7761b22) Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> (cherry picked from commit 16b7b455ee40fd1be5bb9aacf24b106df0d9325e) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* dpkg-configure: do not reload daemon configurationMax Krummenacher2017-08-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case a systemd service disables itself while init is still in its boot sequence the reloading of the service files can be problematic. In that case: It seems that systemd looses the state of .device units, and some services depend on such units (namely serial consoles such as serial-getty@ttymxc0.service). As a result no getty is spawned on the affected serial tty. After a power-cycle the second boot (which does not disable services) succeeds. The following sequence shows this problem: | Jan 09 16:36:28 apalis-t30 systemctl[162]: Removed /etc/systemd/system/sysinit.target.wants/run-postinsts.service. | Jan 09 16:36:28 apalis-t30 systemd[1]: Reloading. | ... | And then the failing one: | Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start timed out. | Feb 22 15:33:15 apalis-t30 systemd[1]: Timed out waiting for device dev-ttyS0.device. | Feb 22 15:33:15 apalis-t30 systemd[1]: Dependency failed for Serial Getty on ttyS0. | Feb 22 15:33:15 apalis-t30 systemd[1]: serial-getty@ttyS0.service: Job serial-getty@ttyS0.service/start failed with result 'dependency'. | Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start failed with result 'timeout'. | Feb 22 15:33:15 apalis-t30 systemd[1]: Reached target Login Prompts. (the time has been updated between this two events, but that does not influence the issue) Using --no-reload in the service file avoids the "Reloading." message above and seems to not cause such issues anymore. Reported-by: Stefan Agner <stefan.agner@toradex.com> (From OE-Core rev: e735c176361fca43420565dcb8900bbff2f3664e) Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> (cherry picked from commit 94fabe4b03e899d8876027ee2ced649737a9e522) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rm_work: fix build break for do_image_completeMartin Jansa2017-08-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | * since following commit: commit 2ff9d40dc88d43567472218cf3d3faf414398c71 Author: Richard Purdie <richard.purdie@linuxfoundation.org> Date: Sun Jul 30 16:06:57 2017 +0100 image/rm_work: Promote do_image_complete to be more sstate like all image rm_work tasks are failing with: mv: 1.0-r0.do_image_complete.228730130ba309f85b73b72222ba11d7.raspberrypi3 and 1.0-r0.do_image_complete.228730130ba309f85b73b72222ba11d7.raspberrypi3 are the same file it's because for $i 1.0-r0.do_image_complete.228730130ba309f85b73b72222ba11d7.raspberrypi3 there will be first SSTATETASK in $j do_deploy, so the sed call doesn't replace anything It might be different order of SSTATETASKS in my builds (it might work only when do_image_complete is the first one in the list), but here: SSTATETASKS="do_deploy do_image_complete do_image_qa do_package do_package_qa do_package_write_ipk do_packagedata do_populate_lic do_populate_sdk do_populate_sdk_ext do_populate_sysroot" (From OE-Core rev: 0c905d4e7fa8e5416945fa0d61ebc1d34409d1e6) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* musl: Build only in ARM mode when using clangKhem Raj2017-08-161-0/+2
| | | | | | | | | | | clang 5.0 has a codegen bug when compiling musl in thumb2 mode see https://bugs.llvm.org/show_bug.cgi?id=34165 (From OE-Core rev: 3b4182968c5a1271748002f0e0264f54643a9f1c) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer1.0-python: upgrade to version 1.12.2Carlos Rafael Giani2017-08-161-2/+2
| | | | | | | (From OE-Core rev: 084eb341281e396b25805bc88b0f09c03112c144) Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer1.0-vaapi: upgrade to version 1.12.2Carlos Rafael Giani2017-08-164-70/+16
| | | | | | | | | | | | | | | | * Remove backported patch: 1. vaapivideobufferpool-create-allocator-if-needed.patch * Add PACKAGECONFIG_GL variable to make it possible for BSP layers to customize what should be the default, EGL or GLX * Set virtual/egl instead of virtual/mesa as egl dependency in case platform specific drivers provide virtual/egl functionality (From OE-Core rev: 42daac1ade210d873aa4761d89d2402fbe80f07b) Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer1.0-libav: upgrade to version 1.12.2Maxin John2017-08-161-2/+2
| | | | | | | (From OE-Core rev: 7991a8a094f69a5777e21b17f130277e858acd24) Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer1.0-omx: upgrade to version 1.12.2Maxin John2017-08-161-2/+2
| | | | | | | (From OE-Core rev: 01d7987786ff26eb56cc00712d77851f48659a3f) Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer1.0-rtsp-server: upgrade to version 1.12.2Maxin John2017-08-162-6/+6
| | | | | | | (From OE-Core rev: bdcf49ddf9d0852a87fd5306f6fc0e6c5b716d1c) Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer1.0-plugins-ugly: upgrade to version 1.12.2Maxin John2017-08-162-3/+2
| | | | | | | | | | | * libmad plugin was removed in 1.12.0, since mad is GPLed, unmaintained, and both gst-libav & the mpg123 plugin are fully functional alternatives. (From OE-Core rev: a963a2e38e246554b7083430710a2aba430df5e5) Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer1.0-plugins-bad: upgrade to version 1.12.2Carlos Rafael Giani2017-08-168-1249/+89
| | | | | | | | | | | | | | | | | | | | | | | | | * Remove backported patches: 1. 0001-smoothstreaming-implement-adaptivedemux-s-get_live_s.patch 2. 0001-smoothstreaming-use-the-duration-from-the-list-of-fr.patch 3. 0001-mssdemux-improved-live-playback-support.patch * Refreshed the following patches: 1. 0001-Makefile.am-don-t-hardcode-libtool-name-when-running.patch Extended patch to include fix for libgstallocators 2. 0001-Prepend-PKG_CONFIG_SYSROOT_DIR-to-pkg-config-output.patch Updated to apply to 1.12.2 3. gstreamer-gl.pc.in-don-t-append-GL_CFLAGS-to-CFLAGS.patch Updated to apply to 1.12.2 * Removed license checks in tta directory as it doesn't exist anymore. * In 1.12.0, old unsupported plugins were removed. As a result, the list of unsupported plugins was removed. (From OE-Core rev: 1fa8492e54dd71ce7d4d853e0cb7295c28fa5e76) Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer1.0-plugins-good: upgrade to version 1.12.2Maxin John2017-08-163-39/+6
| | | | | | | | | | | | | | | | | | * Remove backported patch: 1. 0001-v4l2object-Also-add-videometa-if-there-is-padding-to.patch * Added RPROVIDES to handle the renamed plugins (oss4 is not enabled): 1. libgstpulse -> libgstpulseaudio 2. libgstsouphttpsrc -> libgstsoup * Updated gstreamer1.0-meta-base to include this change: 1.gstsouphttpsrc plugin was renamed to gstsoup (From OE-Core rev: 142d9e3d68147cdad18a3a60eaa22c33c418ffec) Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer1.0-plugins-base: upgrade to version 1.12.2Maxin John2017-08-162-35/+2
| | | | | | | | | | * Remove upstreamed patch: 1. encodebin-Need-more-buffers-in-output-queue-for-bett.patch (From OE-Core rev: 10d509f69fcdcb4d2c07d3c4cc403c74956fb1a8) Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gstreamer1.0: upgrade to version 1.12.2Carlos Rafael Giani2017-08-164-28/+74
| | | | | | | | | | | | | | | | | * Version 1.12 introduces support for libdw (provided by elfutils). libdw adds source lines & numbers to backtraces. A new "dw" packageconfig added for enabling/disabling this feature. In addition, the old patch for deterministic unwind configuration was replaced with one that also allows the same for the dw configuration. This new patch was also submitted to bugzilla. * Leftover docbook cruft was removed, meaning that the "--disable-docbook" configure switch is gone. (From OE-Core rev: a6c12ff35c97f4225a6b2f226ae4483d7bacdfb9) Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: fix distrodata.py to use per-recipe UPSTREAM_VERSION_UNKNOWN settingAlexander Kanavin2017-08-1629-10/+35
| | | | | | | | | | | ... instead of a global exception list which was problematic. [YOCTO #11896] (From OE-Core rev: 89dfede4ca795ba085f1ee7290c6dede573c11db) Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* pax-utils: check upstream version from debian serversAlexander Kanavin2017-08-161-0/+2
| | | | | | | | | Gentoo server can be very slow to list the tarball directory. (From OE-Core rev: 4f6059a6582d5fdd7260b816301e939d1e3f3ddb) Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* v86d: take tarball from debianAlexander Kanavin2017-08-161-3/+3
| | | | | | | | | | Gentoo is removing the package due to dead upstream; Debian might carry it for a while longer. (From OE-Core rev: 5026730a2f0701ebad4ddf57990b1ae3b484ae72) Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* assimp: fix upstream version checkAlexander Kanavin2017-08-161-0/+1
| | | | | | | (From OE-Core rev: d15bcae5fa04a84f2909217bcfc657aa2ce7d3f0) Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* distrodata.bbclass: add UPSTREAM_VERSION_UNKNOWN and UPSTREAM_CHECK_UNRELIABLEAlexander Kanavin2017-08-161-34/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These are optional per-recipe variables with the following meaning: UPSTREAM_VERSION_UNKNOWN - set if the upstream version check fails reliably, e.g. absent git tags, or weird version format used on our or on upstream side. If this variable is not set and version check fails, or if it is set and the version check succeeds, then the checkpkg selftest for the recipe will fail. UPSTREAM_CHECK_UNRELIABLE - set if the upstream check cannot be reliably performed due to transient network failures, or server behaving weirdly. This one should be used sparingly, as it completely excludes a recipe from upstream checking, and thus we don't get automatically notified about new upstream releases. Also the upstream status string in the checkpkg csv output is clarified with the following possible values: MATCH - recipe is providing the latest upstream version UPDATE - there is a new version released by upstream, recipe should be updated CHECK_IS_UNRELIABLE - an upstream check was skipped as requested by recipe via UPSTREAM_CHECK_UNRELIABLE UNKNOWN - upstream version check was performed, but the upstream verison could not be determined. The recipe acknowledges this via UPSTREAM_VERSION_UNKNOWN setting. UNKNWON_BROKEN - same as previous, but the recipe does not include the acknowledgement and should be fixed. KNOWN_BROKEN - upstream check worked, but recipe claims it shouldn't; to fix this remove UPSTREAM_VERSION_UNKNOWN from recipe. [YOCTO #11896] (From OE-Core rev: 2a44ac1add0338cd7ff012cda96bf113c9a01bd6) Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* populate_sdk_base.bbclass: add handling package exclusions to do_populate_sdkYi Zhao2017-08-161-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is an error for populate_sdk when we exclude package by using PACKAGE_EXCLUDE. Reproduced steps: echo "PACKAGE_EXCLUDE = \"psplash\"" >> conf/local.conf bitbake core-image-sato -c populate_sdk Error log: ERROR: core-image-sato-1.0-r0 do_populate_sdk: Could not invoke dnf. Command '/buildarea1/poky/build/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/recipe-sysroot-native/usr/bin/dnf -y -c /buildarea1/poky/build/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/sdk/image/opt/poky/2.3/sysroots/i586-poky-linux/etc/dnf/dnf.conf --setopt=reposdir=/buildarea1/poky/build/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/sdk/image/opt/poky/2.3/sysroots/i586-poky-linux/etc/yum.repos.d --repofrompath=oe-repo,/buildarea1/poky/build/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo --installroot=/buildarea1/poky/build/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/sdk/image/opt/poky/2.3/sysroots/i586-poky-linux --setopt=logdir=/buildarea1/poky/build/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/temp -x psplash --nogpgcheck install run-postinsts dnf packagegroup-core-x11-base packagegroup-core-ssh-dropbear packagegroup-core-standalone-sdk-target packagegroup-base-extended packagegroup-core-x11-sato psplash packagegroup-core-boot rpm' returned 1: Unable to detect release version (use '--releasever' to specify release version) Added oe-repo repo from /buildarea1/poky/build/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo Last metadata expiration check: 0:00:00 ago on Thu 10 Aug 2017 09:26:32 AM UTC. No package psplash available. Error: Unable to find a match Add handling package exclusions to do_populate_sdk. The code copies from do_rootfs in image.bbclass. (From OE-Core rev: 86db855da4ee000737281ef7cc893d56854b3952) Signed-off-by: Yi Zhao <yi.zhao@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* binutils: Upgrade to 2.29Khem Raj2017-08-1629-1094/+471
| | | | | | | (From OE-Core rev: 3bf990eb275f63190a2cf7253527d6d49fd93f1a) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-05-28 00:44:05 +0000