summaryrefslogtreecommitdiffstats
path: root/meta
Commit message (Collapse)AuthorAgeFilesLines
* iproute2: backport a patch to make adding vxlan link successRoy.Li2014-11-042-0/+36
| | | | | | | | | | | | | | | | | | | If without this patch: $ ip link add vxlan0 type vxlan id 51 group 238.1.1.1 dev eth0 Error: argument "vxlan0" is wrong: Unknown device $ With this patch; $ ip link add vxlan0 type vxlan id 51 group 238.1.1.1 dev eth0 $ ifconfig -a |grep vxlan0 vxlan0 Link encap:Ethernet HWaddr da:61:56:2e:c2:20 $ (From OE-Core rev: 4f2873c8567738310f7e86c633c6da759554b21a) Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* python-pygtk: Restore pkg-config fileGary Thomas2014-11-042-1/+14
| | | | | | | | | | | | | | Some previous version of this recipe was errantly removing the pygtk-2.0.pc (pkg-config) file. This is needed for other packages to be able to build against this library. Also update the .pc file to match current pkg-config use (libdir was missing). (From OE-Core rev: 8c6158d7bcca2ecf3e150d1e8eaaaa4ece58e1e2) Signed-off-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* pciutils: Fix multilib header conflict - pci/config.hMing Liu2014-11-041-0/+4
| | | | | | | | | | pci/config.h conflicts between 32-bit and 64-bit versions. (From OE-Core rev: 21fb6bc1b030cab14e2c9b14607b34a62262ac06) Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* python-2.7.3:remove BOM insertion codeKai Kang2014-11-042-0/+25
| | | | | | | | | | | | | | | | | | Backport patch from: https://hg.python.org/cpython/rev/af46a001d5ec SysLogHandler converts message to utf8 and adds BOM, supposedly to conform with RFC5424, but the implementation is broken: the RFC specifies that the BOM should prefix only unstructured message part, but current Python implementation puts it in the middle of structured part, thus confusing RFC-compliant receivers. (From OE-Core rev: c51caffe5ac0d49844dcbac7967f609d44c20470) Signed-off-by: yzhu1 <yanjun.zhu@windriver.com> Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* image_types.bbclass: Make ubi depend on ubifsPascal Bach2014-11-041-0/+2
| | | | | | | | | | | The ubi command assumes the ubifs file is present. This makes sure this is really the case. (From OE-Core rev: 0a947408f32d7ab10d2004e7d9332296b82191a3) Signed-off-by: Pascal Bach <pascal.bach@siemens.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* license.bbclass: canonicalise the licenses named with 'X+'Jackie Huang2014-11-041-2/+9
| | | | | | | | | | | | | | | | If INCOMPATIBLE_LICENSE=GPLv3, GPLv3+ should be excluded as well but not now since there is no SPDXLICENSEMAP for licenses named with 'X+', we can add all the SPDXLICENSEMAP settings for licenses named with 'X+' in licenses.conf, but it's more like a duplication, so improve the canonical_license function to auto map for 'X+' if SPDXLICENSEMAP for 'X' is available, so GPLv3+ becomes GPL-3.0+. (From OE-Core rev: 1d6dab1dbbbfbcb32e58dba3111130157ef2b24f) Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* curl: Security Advisory - curl - CVE-2014-3613Chong Lu2014-11-042-0/+270
| | | | | | | | | | | | By not detecting and rejecting domain names for partial literal IP addresses properly when parsing received HTTP cookies, libcurl can be fooled to both sending cookies to wrong sites and into allowing arbitrary sites to set cookies for others. (From OE-Core rev: 985ef933208da1dd1f17645613ce08e6ad27e2c1) Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kmod: fix debuginfo is missing in shared libraryChong Lu2014-11-042-1/+10
| | | | | | | | | | | | | INHIBIT_PACKAGE_STRIP variable will make debuginfo lose in shared library. The test cases of kmod contain kernel modules for many different architectures, strip and arch gets confused and throws errors. Pack kernel modules in test cases to avoid strip command failed. (From OE-Core rev: 3576399ed163cb3136ee1a2077622035d2033158) Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* systemd: don't add files and dependencies from units ConflictsRoss Burton2014-11-041-4/+1
| | | | | | | | | | | Adding dependencies and moving files based on Conflicts tags in unit files isn't right, mainly as it means that systemd depends on systemd-binfmt, because the latter ends up containing the shutdown.target unit. (From OE-Core rev: 02767aac492cedf6ccd02648b8e65751cc23c11c) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package_manager: Fix BAD_RECOMMENDATIONS for opkgPaul Barker2014-11-041-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In package_manager.py, when using opkg as the packager, the command 'opkg <args> info <pkg>' is called to get information about each pkg in BAD_RECOMMENDATIONS in a format that can be written to the status file. The 'Status: ...' line is modified and all other lines are passed through. Changing the verbosity level argument for this command will change what it written into the status file. Crucially, with the default verbosity level, no blank lines are being printed by the opkg command and so no blank lines are being written to the status file to separate each package entry. The package parsing code in opkg expects package entries in the status file to be separated by at least one blank line. If no blank line is seen, the next package entry is interpreted as a continuation of the last package entry, but the new values overwrite the old values. So with the default verbosity level, a blank line follows some package entries and these are parsed. The others are dropped due to the lack of blank lines. As the verbosity increases, more debugging messages add blank lines and more packages are parsed. The solution to ensure that this works correctly regardless of the verbosity level is simply add a blank line after the output of 'opkg info' is written to the status file, ensuring that the next package is separated from the current package. [YOCTO #6816] (From OE-Core rev: 3fa24eee41c26fecd5e4f680082288ec772d2de9) Signed-off-by: Paul Barker <paul@paulbarker.me.uk> Cc: Chris Carr <chris.carr@ge.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bind: fix to use correct environment file in service fileChen Qi2014-11-041-1/+1
| | | | | | | | | | Use /etc/default/bind9 as the environment file in named.service. (From OE-Core rev: 0ee1fa68a4d749585c43fc706c8da6e849d10857) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* udev: fix uevent-helper disableJohan Hovold2014-11-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | Make sure that /proc/sys/kernel/hotplug exists before trying to disable the uevent-helper mechanism. Since kernel commit 86d56134f1b6 ("kobject: Make support for uevent_helper optional.") the kernel can be built without uevent-helper support. In this case /proc/sys/kernel/hotplug does not exist and the current sysvinit script fails with /etc/rcS.d/S04udev: line 132: can't create /proc/sys/kernel/hotplug: nonexistent directory when trying to disable the uevent-helper mechanism during boot. Note that a single NULL-character has always been sufficient to disable. (From OE-Core rev: f7b8445f2e89ad0a59c2859f9eb26855769f1070) Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* BusyBox: Fixing broadcast address is not fed and rightly initializedyadi.hu@windriver.com2014-11-041-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | When using udhcpc along with ip command(/sbin/ip), broadcast address is not assigned. Broadcast address is successfully assigned when using udhcpc without ip command existence. with ip command: $ifconfig eth0|grep Bcast inet addr:128.224.162.141 Bcast:0.0.0.0 Mask:255.255.254.0 $ without ip command: $ifconfig eth0|grep Bcast inet addr:128.224.162.141 Bcast:128.224.163.255 Mask:255.255.254.0 $ /etc/udhcp.d/50default[simple.script] is called to set ip address by dhcp client, In case of ifconfig, it doesn't care of it's existence because it will automatically calculate broadcast address then assign it if there is no broadcast option. However in case of ip command, it requires broadcast address statically. (From OE-Core rev: 666c6a126cd12d2555361f5b573b6a26437df780) Signed-off-by: Hu <yadi.hu@windriver.com> Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* ldconfig-native: fix a endian-ness bugShan Hai2014-11-042-0/+48
| | | | | | | | | | | | | Some header fields of ELF were read with wrong size on 64bit big-endian machine, fix it by reading the fields with read64 instead of read32. (From OE-Core rev: adbf0b1fdf897076e5e3dec2443c8927f315c2e6) Signed-off-by: Par Olsson <Par.Olsson@windriver.com> Signed-off-by: Shan Hai <shan.hai@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* xinetd: add systemd unit fileChong Lu2014-11-042-1/+24
| | | | | | | | | | Add systemd unit file for xinetd. (From OE-Core rev: aa0a1cbc92a4d586377cb9e9827ee8b90749c364) Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gdb-cross: build with python supportAndreas Müller2014-11-041-2/+11
| | | | | | | | | | | | | | variable contents are displayed properly when debugging qt applications remotely see [1] for further details [1] http://qt-project.org/doc/qtcreator-2.6/creator-debugging-helpers.html#debugging-helpers-based-on-python (From OE-Core rev: 440440363dded1d1549dc94a3eaccfcbb3cf517d) Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* systemd: don't move libgudev around, it breaks libgudev-1.0.laMartin Jansa2014-11-041-5/+4
| | | | | | | | | | | * libgudev-1.0.la still references /usr/lib and this change was breaking gypsy (detected in navit) and network-manager-applet (From OE-Core rev: 7807d1d8b9535a87ba3e5ab7df21a2954708333f) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* multilib.bbclass/package_manager.py: fix <multilib>-meta-toolchain build failureHongxu Jia2014-11-042-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a failure to build lib32-meta-toolchain: ... |ERROR: lib32-packagegroup-core-standalone-sdk-target not found in the base feeds (qemux86_64 x86 noarch any all). ... In package_manager.py, the variable 'DEFAULTTUNE_virtclass-multilib-lib32' is used to process multilib image/toolchain. But for the build of lib32- meta-toolchain, the value of 'DEFAULTTUNE_virtclass-multilib-lib32' is deleted. In 'bitbake lib32-meta-toolchain -e', we got: ... |# $DEFAULTTUNE_virtclass-multilib-lib32 [2 operations] |# set? /home/jiahongxu/yocto/build-20141010-yocto/conf/local.conf:237 |# "x86" |# del data_smart.py:406 [finalize] |# "" |# pre-expansion value: |# "None" ... The commit 899d45b90061eb3cf3e71029072eee42cd80930c in oe-core deleted it at DataSmart.finalize ... Author: Richard Purdie <richard.purdie@linuxfoundation.org> Date: Tue May 31 23:52:50 2011 +0100 bitbake/data_smart: Change overrides behaviour to remove expanded variables from the datastore ... We add an internal variable 'DEFAULTTUNE_ML_<multilib>', assign it with the value of 'DEFAULTTUNE_virtclass-multilib-lib32' before deleting. For rpm backend in package_manager.py, we use DEFAULTTUNE_virtclass-multilib -lib32 first, if it is not available, and try to use DEFAULTTUNE_ML_<multilib> [YOCTO #6842] (From OE-Core rev: 9c59d3d8b538d3a98ff4b5e5b189a4a23a85da2d) Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* opkg: fix remove pkg with --force-removal-of-dependent-packages failedHongxu Jia2014-11-042-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | opkg remove perl --force-removal-of-dependent-packages ... Removing package perl-module-extutils-mm-dos from root... ... Removing package perl-module-extutils-mm-dos from root... You can force removal of packages with failed prerm scripts with the option: --force-remove No packages removed. Collected errors: * pkg_run_script: Internal error: perl-module-extutils-mm-dos has a NULL tmp_unpack_dir. * opkg_remove_pkg: not removing package "perl-module-extutils-mm-dos", prerm script failed ... While remove pkg with '--force-removal-of-dependent-packages', pkg may be added to remove list multiple times, add status check to make sure pkg only be removed once. [YOCTO #6819] (From OE-Core rev: 476f864b1564265469b5c9074c1f262bce21f119) Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* tzdata: update to 2014iArmin Kuster2014-11-042-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes affecting future time stamps Pacific/Fiji will observe DST from 2014-11-02 02:00 to 2015-01-18 03:00. (Thanks to Ken Rylander for the heads-up.) Guess that future years will use a similar pattern. A new Zone Pacific/Bougainville, for the part of Papua New Guinea that plans to switch from UTC+10 to UTC+11 on 2014-12-28 at 02:00. (Thanks to Kiley Walbom for the heads-up.) Changes affecting time zone abbreviations Since Belarus is not changing its clocks even though Moscow is, the time zone abbreviation in Europe/Minsk is changing from FET to its more-traditional value MSK on 2014-10-26 at 01:00. (Thanks to Alexander Bokovoy for the heads-up about Belarus.) The new abbreviation IDT stands for the pre-1976 use of UT+8 in Indochina, to distinguish it better from ICT (UT+7). Changes affecting past time stamps Many time stamps have been corrected for Asia/Ho_Chi_Minh before 1976 (thanks to Trần Ngọc Quân for an indirect pointer to Trần Tiến Bình's authoritative book). Asia/Ho_Chi_Minh has been added to zone1970.tab, to give tzselect users in Vietnam two choices, since north and south Vietnam disagreed after our 1970 cutoff. Asia/Phnom_Penh and Asia/Vientiane have been turned into links, as they differed from existing zones only for older time stamps. As usual, these changes affect pre-1970 time stamps only. Their old contents have been moved to the 'backzone' file. ` (From OE-Core rev: 00ca64c98615c95343e05017caa6da4720e37be2) Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* tzcode: update to 2014iArmin Kuster2014-11-042-11/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes affecting code The time-related library functions now set errno on failure, and some crashes in the new tzalloc-related library functions have been fixed. (Thanks to Christos Zoulas for reporting most of these problems and for suggesting fixes.) If USG_COMPAT is defined and the requested time stamp is standard time, the tz library's localtime and mktime functions now set the extern variable timezone to a value appropriate for that time stamp; and similarly for ALTZONE, daylight saving time, and the altzone variable. This change is a companion to the tzname change in 2014h, and is designed to make timezone and altzone more compatible with tzname. The tz library's functions now set errno to EOVERFLOW if they fail because the result cannot be represented. ctime and ctime_r now return NULL and set errno when a time stamp is out of range, rather than having undefined behavior. Some bugs associated with the new 2014g functions have been fixed. This includes a bug that largely incapacitated the new functions time2posix_z and posix2time_z. (Thanks to Christos Zoulas.) It also includes some uses of uninitialized variables after tzalloc. The new code uses the standard type 'ssize_t', which the Makefile now gives porting advice about. Changes affecting commentary Updated URLs for NRC Canada (thanks to Matt Johnson and Brian Inglis). (From OE-Core rev: 3a4cc36da4786f8de57b328e8220b96fc22f3577) Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* mtd-utils: Fix alignment trap triggered by NEON instructionsYuanjie Huang2014-11-042-0/+45
| | | | | | | | | | | | | NEON instruction VLD1.64 was used to copy 64 bits data after type casting, and they will trigger alignment trap. This patch uses memcpy to avoid alignment problem. (From OE-Core rev: a31080021ad3ecfb92220dcb8c717928db268f1e) Signed-off-by: Yuanjie Huang <Yuanjie.Huang@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* python3: do not replace ccache in the middle of a pathRoy Li2014-11-041-1/+1
| | | | | | | | | | | | | | | | | Python recipe did a sed s/ccache/$(CCACHE) on the Makefile, which replaces all "ccache" including ones that consist of a full path. This leads to build error when building in a project path with "ccache" in its name. Fix it by only replacing "ccache " with "$(CCACHE) ". Same fix on python 2.xx is: 1181112cf65bc[python: do not replace ccache in the ] (From OE-Core rev: 9f2398a0ff42389052155d971f136a37c5dc80da) Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* subversion: Security Advisory - subversion - CVE-2014-3528Yue Tao2014-11-043-0/+31
| | | | | | | | | | | | | | | | Apache Subversion 1.0.0 through 1.7.x before 1.7.17 and 1.8.x before 1.8.10 uses an MD5 hash of the URL and authentication realm to store cached credentials, which makes it easier for remote servers to obtain the credentials via a crafted authentication realm. http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2014-3528 (From OE-Core rev: e0dc0432b13f38d16f642bdadf8ebc78b7a74806) Signed-off-by: Yue Tao <Yue.Tao@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* subversion: Security Advisory - subversion - CVE-2014-3522Yue Tao2014-11-044-1/+887
| | | | | | | | | | | | | | | | | | | The Serf RA layer in Apache Subversion 1.4.0 through 1.7.x before 1.7.18 and 1.8.x before 1.8.10 does not properly handle wildcards in the Common Name (CN) or subjectAltName field of the X.509 certificate, which allows man-in-the-middle attackers to spoof servers via a crafted certificate.<a href=http://cwe.mitre.org/data/definitions/297.html target=_blank>CWE-297: Improper Validation of Certificate with Host Mismatch</a> http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2014-3522 (From OE-Core rev: 06a33cd00ea11abec1ebe9d5883e44778075ccc6) Signed-off-by: Yue Tao <Yue.Tao@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* mc: Update patch statusPaul Barker2014-11-041-1/+1
| | | | | | | | | | mc-CTRL.patch has now been accepted upstream. (From OE-Core rev: ffc1c58809a2f5fef13484613d1b57c2d4c5ebfb) Signed-off-by: Paul Barker <paul@paulbarker.me.uk> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* multilib.bbclass: fix incorrect TARGET_VENDOR in multilib imageHongxu Jia2014-11-041-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | While building multilib extended images such as libXX-core-image-minimal, the WORKDIR has the same dir with the building of core-image-minimal. $ ls tmp/work/qemux86_64-poky-linux/ -al ... drwxrwxr-x 3 jiahongxu jiahongxu 4096 Oct 13 16:01 core-image-minimal drwxrwxr-x 3 jiahongxu jiahongxu 4096 Oct 16 11:11 lib32-core-image-minimal ... While image class is inherited, it did not assign OVERRIDES with 'virtclass-multilib-libXXX', so the reason is variable TARGET_VENDOR was not override for multilib in that situation. It refers what did for PN and MLPREFIX, and manually do the multilib override for TARGET_VENDOR in RecipePreFinalise handler. [YOCTO #6844] (From OE-Core rev: 7ca012fb3addb11ba3f899efa0619ddd8d3c6946) Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/image: remove obsolete MULTILIB_VENDORSHongxu Jia2014-11-041-11/+0
| | | | | | | | | | | | | | In oe-core commit 03c5f39b4d7dd8c81e0a130b7d5884e5af039a24, it removed obsolete codes about variable MULTILIB_VENDORS. We clean up the rest obsolete codes related with MULTILIB_VENDORS (From OE-Core rev: 43a1c2dc08b4291e042b6c9ef981bd094ea2c477) Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* elfutils: fix elf_cvt_gnuhashRoy Li2014-10-303-0/+31
| | | | | | | | | | The 'dest' and 'src' can be same, we need to save the value of src32[2] before swaping it. (From OE-Core rev: b7936bacf0cc89bdda6722d317274bd4a3af840a) Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* which-2.18: Use foreign strictness to avoid automake errorsJackie Huang2014-10-302-1/+31
| | | | | | | | | | Fixed: Makefile.am: error: required file './ChangeLog' not found (From OE-Core rev: c84bfa0f519e0bb74aed833a6318c21d91fce377) Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* hicolor-icon-theme: Deal with "make clean" breakageRichard Purdie2014-10-301-0/+5
| | | | | | | | | hicolor-icon-theme can't cope with a "make clean" so disable that newly enabled functionality. (From OE-Core rev: 5b806c773a77a24799096b8c4aedfea6cff509f8) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gnu-config: Deal with "make clean" breakageRichard Purdie2014-10-302-0/+10
| | | | | | | | | gnu-config can't cope with a "make clean" so disable that newly enabled functionality. (From OE-Core rev: 2b0e78267df0ad708a5c15871757ca0db178621f) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* wpa_supplicant: Improve rebuild handlingRichard Purdie2014-10-301-0/+1
| | | | | | | | | | Due to the split level nature of the wpa_suppliant sources, the standard clean methods don't work. This change ensures it picks up on changes to configuration. (From OE-Core rev: 9183ce719463b20350d2a3de5ead64b0cc642d6e) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cmake: Try and improve cleaning of builds when B==SRichard Purdie2014-10-301-0/+2
| | | | | | | | | | Currently if B==S for a cmake recipe, the build will not reconfigure. This patch adds code to remove the generated cmake files, meaning cmake will then be forced to regenerate them. This forces cmake to see configuration changes it may not otherwise see. (From OE-Core rev: 01f4ed0cfbc60859aabfa5bff33ed966117a05d7) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base.bbclass: Enable using 'make clean' for rebuildsRichard Purdie2014-10-301-1/+14
| | | | | | | | | | | | | | When something rebuilds say due to ${baselib} changing or some other key variable, software is often not rebuilt due to the fact that make detects no dependency change. By running "make clean" when these changes occur, we can at least try and ensure the correct rebuilds happen. We use the same checksum check as autotools to decide if things have changed or not. (From OE-Core rev: d06f2c089e01b7c67699800a7a54a4225233da93) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* autotools: Use make clean for builds not supporting B != SRichard Purdie2014-10-301-1/+5
| | | | | | | | | | | | If the build doesn't support B != S, we can try running "make clean" instead to try and clean up previous objects if the hash for the task has changed. This tries to ensure that when variables like ${baselib} change, the changes are correctly accounted for. (From OE-Core rev: c2f761e2010857e2a2aad1dccf06ec39d15c1c86) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* image.py: Fix error in graph sortingPascal Bach2014-10-301-1/+1
| | | | | | | | | | | | | The graph sorting algorithm for image dependencies does a look for an occurrence of a searched string instead of comparing the chunk to the searched string. This leads to the problem that ubifs is recognized as ubi aswell. This fixes this by splitting up the string into chunks. (From OE-Core rev: cec9725c540c2d54c27092e40d159694cea75b5f) Signed-off-by: Pascal Bach <pascal.bach@siemens.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* multilib.conf: set MULTILIB_GLOBAL_VARIANTS conditionallyPeter Seebach2014-10-301-1/+1
| | | | | | | | | | | | It is not entirely obvious that all reasonable configurations will have multilib.conf strictly before the file which might want to set MULTILIB_GLOBAL_VARIANTS. The x86-ish values here look like reasonable default guesses, but shouldn't override an explicit setting. (From OE-Core rev: 2645c07892abe79f73379b1ca4196f593cb3b330) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* mklibs: Fix loader for mipselKhem Raj2014-10-303-1/+20
| | | | | | | | | | Additionally treat ld.so to be searched in sysroot Change-Id: I8b4acb821d9855a1163c7149bc8e369c7c438856 (From OE-Core rev: 4cf539e67333ba2c3fe924b092e104da53e68ca0) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* glibc: Delete ldconfig when USE_LDCONFIG is not setKhem Raj2014-10-301-1/+2
| | | | | | | | | | | This avoids below QA error/warning /sbin/ldconfig [installed-vs-shipped] Change-Id: I028b692eefeaa6e0e0e6507ab4108caa29e41e91 (From OE-Core rev: 2b499db19cd9bd14292457716b50dc62ed90515d) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rm_work: Speed up rootfs/populate_sdk removalRichard Purdie2014-10-301-0/+13
| | | | | | | | | | | | | | Commands like bitbake X -c rootfs or bitbake X -c populate_sdk do not trigger rm_work to clean up the directories afterwards since it traditionally hooks onto do_build. This change means those two tasks now clean up after themselves. We use the cleandirs function attribute to handle this. [YOCTO #6413] (From OE-Core rev: 6bf06d80c2ce03dfdedac5ad8cf42ef8e36b0ecb) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gcc: poison default sysroot pathRichard Purdie2014-10-306-9/+9
| | | | | | | | | | | | | | | | | | | Various pieces of the code assume that the --sysroot option gets passed into the compiler tools. By having a "sane" default, we don't always spot when this occurs and this can later show up as breakage in sstate, or in usage of the external toolchain. We've long since talked about poisoning the default such that it will break unless the correct option is specified. This patch does just that. If this patch causes something to fail to build, it most likely means the various compiler flags and commands are not correctly being passed through to the underlying piece of software and that there is a real problem that needs fixing, its not the fault of this patch. (From OE-Core rev: 04b725511a505c582a3abdf63d096967f0320779) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* nativesdk-cmake: Adjust toolchain paths dynamicallyOtavio Salvador2014-10-243-0/+33
| | | | | | | | | | | This patch adds a flexible way to configure the CMake in SDKs. It adds a toolchain configuration script which supports subscripts for extensions, as for example Qt5. (From OE-Core rev: 4143f3b0ce0d0c52f5b0babc1bb16ac0ac9610eb) Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-yocto: fix branch validation for AUTOREV, non machine_meta kernelsBruce Ashfield2014-10-241-6/+8
| | | | | | | | | | | | | | | | | The simplication of do_validate_branches missed a case where a custom kernel can supply SRCREV="${AUTOREV}", and not use SRCREV_machine at all. In this case, we will incorrectly try and test the tree for a non-existent commit, and break the build. By simplying the condition of the check to look for an empty SRCREV_machine, we can skip manipulating the tree and testing for a SRCREV. (From OE-Core rev: 212a4bd9b086365c022842a2ac6a2a25bd486002) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto/3.17: v3.17 release and configBruce Ashfield2014-10-242-12/+12
| | | | | | | | | | | | | | | | | Updating the SRCREVs to incoroprate the full 3.17 release, and also updating the meta data to match the v3.17 content: 9ba007f8d0ab meta: bump kver to v3.17-final 5c6c5fe9b0bf config: remove CONFIG_HOTPLUG 0ceecad5f15a qemu: explicitly include usb configuration fragments f6c78ada8655 gfx: convert CONFIG_TABLET_USB_WACOM to CONFIG_HID_USB_WACOM cd1dbedfa3c9 x86: Support 32 bit binaries (From OE-Core rev: 18de1328dc99b851742468a3f366e3acdcce48d4) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto/3.10: 8250/8250_dw: fix compile failure due to stable/Yocto conflictBruce Ashfield2014-10-243-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Updating the SRCREVs for the following fix: 8250/8250_dw: fix compile failure due to stable/Yocto conflict As of merge 60a9d9fc565e4503dbb8705803e83d906afc4ad2, "Merge tag 'v3.10.48' into standard/base" the 8250_dw.c fails to compile due to an undeclared variable. This happens because stable brought in: ------------------------- commit 6d5e79331417886196cb3a733bdb6645ba85bc42 Author: Tim Kryger <tim.kryger@linaro.org> Date: Tue Oct 1 10:18:08 2013 -0700 serial: 8250_dw: Improve unwritable LCR workaround commit c49436b657d0a56a6ad90d14a7c3041add7cf64d upstream. [...] [wangnan: backport to 3.10.43: - adjust context - remove unneeded local var] Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> ------------------------ ...which deletes the p->private_data declaration since it became unused at that point, however in Yocto, we also have this: ----------------------- commit 0e02b050c3cafbcbf9952125089a27e02d6ecea9 Author: David Daney <david.daney@cavium.com> Date: Wed Jun 19 20:37:27 2013 +0000 tty/8250_dw: Add support for OCTEON UARTS. [...] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> (cherry picked from commit d5f1af7ece96cf52e0b110c72210ac15c2f65438) Signed-off-by: Darren Hart <dvhart@linux.intel.com> ----------------------- ...which _adds_ another user of the p->private_data. Here we restore the declaration in order that 8250_dw compiles. Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> [PG: add root cause info to commit log.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> (From OE-Core rev: 4b4d1f38ea54ef8545e726ac9e181da08a2bad05) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* unifdef: remove fork, package upstreamRoss Burton2014-10-243-1026/+15
| | | | | | | | | | Instead of building specifiaclly for native a static fork of unifdef from 2007, simply package the latest tarball. (From OE-Core rev: f642a9753b33c2f35d502b6721601fc690f674ec) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* native.bbclass: use BUILD_* variablesRoss Burton2014-10-242-11/+12
| | | | | | | | | | | | | | Instead of replicating the logic for the host compiler naming from bitbake.conf, use the BUILD_* variables directly. Also change BUILD_CPP to use gcc -E (which native.bbclass previously used), as some recipes (e.g. grub-efi) use ${CPP} with multiple input files, which gcc -E can handle but cpp can't. (From OE-Core rev: 9237d18964ff0bf76f5c37fca21ab3974d81d0d2) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rpm: realpath is required before expanding _dbpath in chrootMing Liu2014-10-243-0/+26
| | | | | | | | | | | | | | | A regression is introduced by commit 66573093: [ rpm: Fix rpm relocation macro usage ] _usr turned out to be a relative path to support dyanmic config after that, but it's being used somewhere as a indicator to locate substrings, so we must get the real path of it in advance. (From OE-Core rev: 1247955a907f51aac7efd305d26856e263c11a65) Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel.bbclass: Create modules directory even if there is no modules installedHe Zhe2014-10-241-0/+1
| | | | | | | | | | | | | | | During kernel_do_install it needs to make symbol link at ${D}/lib/modules/${KERNEL_VERSION}/build, but there will not be ${D}/lib/modules/${KERNEL_VERSION} if there is no modules installed for current image, which will result in a build failure. Add "mkdir -p ${D}/lib/modules/${KERNEL_VERSION}" here to avoid this failure and the need of similar changes in other scripts that also expect it to exist. (From OE-Core rev: f2f72f8ff623d24fffbb1b0ad40bc08f05ff31dd) Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-05-25 18:20:03 +0000