summaryrefslogtreecommitdiffstats
path: root/meta
Commit message (Collapse)AuthorAgeFilesLines
* run-postinsts: for dpkg/opkg, do not rely on /etc/*-postinstsStefan Agner2019-03-242-10/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Start opkg/dpkg as soon as the respective package managers status file is present, no matter whether /etc/$pm-postinsts exists. This decouples the implicit link between postinsts scripts in /etc and the package manager: Currently the package manager is only started if those scripts are present, although the package manager does not use those scripts at all! Package managers install their own set of postinst scripts. The behavior when using rpm packages stays the same. Note that using the package managers capability to execute postinst scripts is preferred for good reasons: It makes sure that the package managers database reflects that the packages have been completely installed and configured. This change allows to drop installation of the postinsts scripts when package management is present. This will be done in a separate change. Note: Before commit 5aae19959a44 ("rootfs.py: Change logic to unistall packages") rootfs.py did not install /etc/$pm-postinsts when package management is installed! The change caused YOCTO #8235 which lead to the behavior change of run-postinsts in first place. (From OE-Core rev: 85e498a4671426999610d90c87c354d41cfe8443) Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package_rpm/archiver: Apply bandaid to src.rpm creationRichard Purdie2019-02-251-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | error: create archive failed on file /media/build1/poky/build/tmp/work/all-poky-linux/xcursor-transparent-theme/0.1.1+gitAUTOINC+23c8af5ba4-r0/deploy-sources/allarch-poky-linux/xcursor-transparent-theme-0.1.1+gitAUTOINC+23c8af5ba4-r0/xcursor-transparent-theme-0.1.1+git0+23c8af5ba4-r0.src.rpm: cpio: read failed - No such file or directory | Building target platforms: noarch-poky-linux | Building for target noarch-poky-linux This is caused by: $ cat log.task_order do_cleansstate (24289): log.do_cleansstate.24289 do_deploy_archives_setscene (24395): log.do_deploy_archives_setscene.24395 do_fetch (24407): log.do_fetch.24407 [..] do_package_write_rpm (25448): log.do_package_write_rpm.25448 do_package_qa (25451): log.do_package_qa.25451 So do_deploy_archives can run from sstate, created a .src.rpm in WORKDIR/deploy-sources, then it was removed when rpm was running. This leads to a broken Source line in the spec file as the original file was found by the os.listdir(). This fix is just a bandaid over much more fundamental problems sadly. (From OE-Core rev: a10020ace4c3cd863c782760f7cbecea557ec6e7) (From OE-Core rev: 6d56e912fbbaa22830b4da5ab230586a3d15b23e) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* archiver/package_rpm: Fix the worst src.rpm generation raceRichard Purdie2019-02-252-1/+7
| | | | | | | | | | | | | | | | | | | | The package_rpm code is writing outside the task's sstate directory into the sstate of do_deploy_archives. This is "out of spec" since if the task is installed from sstate, the files are not restored. This means the files may appear/disappear, things are not deterministic and there are races. Extend the do_package_write_rpm code to handle writing the src.rpm into place to avoid these issues. There are other problems but this avoids races around this file. (From OE-Core rev: c6e151ba7fe0f14044537cf0ab2cac436f1496e3) (From OE-Core rev: b119872fb794a36b6eb9ef5e9c42a9c6c991e835) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool-cross: Handle ccache sstate 'infection' issuesRichard Purdie2019-02-251-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | On a system without ccache, f you: INHERIT += "ccache" bitbake libtool-cross <remove INHERIT> bitbake apmd then it fails due to being unable to find ccache. The references to ccache are coded into libtool-cross but the sstate checksum doesn't reflect this due to the way the class is coded (output should be the same regardless). The simplest solution is to remove references to ccache from the libtool script. The output then works regardless of whether ccache is present or not. The libtool-cross script is only used in a handful of cases (most of the time its dynamically generated by autoconf) so any performance issue is minor. (From OE-Core rev: ed550a49d2114c56e5bc033ecd0e83073d2d4067) (From OE-Core rev: ee6a2e0ccb11e5f5267bc2e406203c78b0443415) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: Fix patch status tagRichard Purdie2019-02-251-1/+1
| | | | | | | | | | (From OE-Core rev: 28fc470e5e10ee9cce893d037ed5e518bc5612f5) (From OE-Core rev: c7c4920fc287bdb5f7a0bca7b2ec2ab7a43f58fd) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libtool: Fix problem with libtoolize in multilib installationsRichard Purdie2019-02-252-0/+25
| | | | | | | | | | | | | | | | | | Without this patch /usr/bin/libtoolize is different for each multilib since their host-triplets are different, despite there being no difference in the functionality of libtoolize itself. This change just patches out the problematic line since its just a comment for the user in help text. Ugly but solves the problem. This fixes issues where libtool and libXX-libtool couldn't be installed into the same system. (From OE-Core rev: f70040fd3ca3508d33ed24c749c0b8095b020dab) (From OE-Core rev: 8480fff287e660f85a99fcc28119fe80d517e0b2) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* multilib_script: Add support for multilib scriptsRichard Purdie2019-02-252-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | Whilst the package managers handle multilib ELF binaries well, they don't handle scripts in the *bindir directories well. This adds support for marking these up so that they can be handled using update-alternatives. Its done this way so that non-multilib systems don't see any changes and there is standardisation amongst the multilibs on how the alternatives are named and prioritiesd. The priotitisation code needs to be added but this change means there is somewhere to add it. Recipe needs to set MULTILIB_SCRIPTS in the form <pkgname>:<scriptname>, e.g. MULTILIB_SCRIPTS = "${PN}-dev:${bindir}/file1 ${PN}:${base_bindir}/file2" to indicate which script files to process from which packages. libtool is used a as a reference to stop the libtool scripts conflicting in a multilib case and allows the kernel-devsrc change to be merged. (From OE-Core rev: 18e837433d07cfdce4019c13f682c6676425a2ad) (From OE-Core rev: 97e2d65d1c406bc58fe693e500fcc939459bac1a) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* image_types: use cpio-native to build cpio imagesRoss Burton2019-02-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | As per the previous commit, upstream cpio has a bug which means it crashes on append. If the image being built has already had testimage ran then cpio-native will be in the sysroot. It's also possible that some distributions are shipping this broken CVE patch too. Now that our cpio-native is fixed, until we can be sure that the host cpio isn't broken depend on cpio-native if building a cpio image. [ YOCTO #13042 ] (From OE-Core rev: c3b9aedcbe538d7fa74bd814644b4899769dec46) (From OE-Core rev: a75eba71145efa1c3d206c5e5c00608a50f013bc) (From OE-Core rev: 9e1c69932add702b9c5bc1faa9ef5db975de0ee3) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cpio: fix crash when appending to archivesRoss Burton2019-02-252-0/+88
| | | | | | | | | | | | | | | | | | | The upstream fix for CVE-2016-2037 introduced a read from uninitialized memory bug when appending to an existing archive, which is an operation we perform when building an image. (From OE-Core rev: 046e3e1fca925febf47b3fdd5d4e9ee2e1fad868) (From OE-Core rev: 2ff6ab2e2944c6a53523b4b1611e1d22f6393500) (From OE-Core rev: c0a3874799224c9ae0d6d7dc4d0a0acf364ccdab) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oe-selftest: devtool: Support meta being a symbolic linkPeter Kjellerstedt2019-02-251-1/+2
| | | | | | | | | | | | | | | oe-selftest's devtool tests have been broken since commit 2457cd57 (oe-selftest: devtool: avoid parallel races by using temporary copy of core) if meta is a symbolic link. (From OE-Core rev: daba6c5a991b370709d17e51305334f55a3858ec) (From OE-Core rev: 3eb59559ecd2e93fb590a330b47de1db0750fc0b) Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oe-selftest: devtool: avoid parallel races by using temporary copy of corePaul Eggleton2019-02-251-0/+64
| | | | | | | | | | | | | | | | | | | | Some of the devtool tests make changes to files under meta/ - legitimately since we want these tests to be working with real recipes and associated files. Unfortunately with the new oe-selftest parallelisation this can break other tests if files go missing at the wrong time (among other scenarios). To avoid this issue, simply take a copy of the core repository and use that for these tests. (We copy the entire repository since changing the path of meta/ influences COREBASE and thus we need to have things like scripts/ alongside as well). (From OE-Core rev: 2457cd57b4195924ef127f497efa2f34f411e660) (From OE-Core rev: 9cb8353a4f0137823d6ed3e467db9dd7ead7b3de) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Only add uninative and checksum if inherited uninative classJeremy Puhlman2019-02-251-2/+3
| | | | | | | | | | | | | | The checksum value is only calculated if the uninative class is inherited, so check for inherit before adding it to local.conf (From OE-Core rev: 3b5b832589d943700b273e3a4d83561be0c47f36) (From OE-Core rev: 8e23a3d59421f34961f39a7db512e93eb9647ec6) Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/utils/httpserver: Rework to avoid hangs and improve loggingRichard Purdie2019-02-254-11/+32
| | | | | | | | | | | | | | | | | | | | | | testimage.bbclass installs a SIGTERM handler which conflicts with the use of multiprocessing here. This is paritcularly problematic if the http service is terminated before its started and hence before its had a chance to reset the default signal handler (as the code was written). Instead, temporarily remove testimage's handler whilst forking the http process which means the correct handler is installed and won't deadlock. Also take the opportunity to add in some log messages about the server start and shutdown so that future debugging is easier and its clearer what the code is doing. (From OE-Core rev: cc0471439aa0085ca87deccf061c5b676ef12388) (From OE-Core rev: 4eac9a5337d93b6cbd3916af97f62bb04881c9cd) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/dnf: Make sure test_dnf_install does not skippedYeoh Ee Peng2019-02-251-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | During debugging dnf issue, we found that the test_dnf_install PASSED the testing even though the environment does not allow dnf install to run successfully. Further debugging had identified that current test_dnf_install will execute dnf install even when the package to be installed already exist, thus dnf install will just skipped and this test will PASSED even though it was not. To solve this, added additional logic to check if the package to be installed already exist, if yes then remove the package before actually run dnf install. This will make sure dnf install was tested as expected. (From OE-Core rev: 4f662b253f7313c4e02bfafb527cdac076b6309a) (From OE-Core rev: a80498e62898110e2ed6b01cbb9f5dd85995d13b) Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* perl: add testdepends for sshArmin Kuster2019-02-251-0/+2
| | | | | | | | | | | | | | | fixes: DEBUG: [Running]$ ssh -l root -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR 192.168.7.4 export PATH=/usr/sbin:/sbin:/usr/bin:/bin; perl -e '$_="Uryyb, jbeyq"; tr/a-zA-Z/n-za-mN-ZA-M/;print' | DEBUG: time: 1548816904.4024463, endtime: 1548817204.397057 | DEBUG: Partial data from SSH call: ssh: connect to host 192.168.7.4 port 22: Connection refused for master/thud/sumo (From OE-Core rev: 76c66e061cdcdcbad73ed503668115120feb0ea3) Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa: rationalise Perl testsRoss Burton2019-02-253-48/+11
| | | | | | | | | | | | | | As with the Python test, this can be both better and faster. No need to copy a file, just run a one-liner. (From OE-Core rev: c6eef46747fe58bb2310be4f06d2fa9b67901d72) (From OE-Core rev: 9188ef8d1edbba8041a73d3bb8a9bfd194db0e92) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/utils/buildproject: Only clean files if we've done somethingRichard Purdie2019-02-251-0/+5
| | | | | | | | | | | | | We should only be wiping out things on target if the tests have actually run. (From OE-Core rev: d38c3eac0a5a1a9b0eb98385832e92f48145655e) (From OE-Core rev: dab22dc58eabaeb421afa3c7de1cc08c5ec34c61) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/runqemu: Enable kvm when QEMU_USE_KVM is setRobert Yang2019-02-251-0/+5
| | | | | | | | | | | (From OE-Core rev: 564de3681353fe8e203425388e8be9703a89d2da) (From OE-Core rev: 1207949c986cc9f6b3940a99e87bc4d8cfb86d5b) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/qemu & runtime: qemu do not need ip input from externalYeoh Ee Peng2019-02-252-4/+3
| | | | | | | | | | | | | | | Qemu do not use the ip input from external. It will retrieve ip from QemuRunner instance and assign ip value. (From OE-Core rev: 14d99dc6c39c963ba3e0d9a30274846bd5369210) (From OE-Core rev: e4990ae01c9f3f486b4b745a2602795e9d496109) Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/cases: Improve dependencies of kernel/gcc/build testsRichard Purdie2019-02-256-30/+31
| | | | | | | | | | | | | Mark up these tests as needing a compiler, make and kernel source code as appropriate, the image feature requirements can then be retired. (From OE-Core rev: 9f64e6c25abdf494fb511e9cd401f8dcaa08be2a) (From OE-Core rev: 544c56b6950f0598d5eaf62d9ae9d9de5fcb7eaf) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/cases: Improve test dependency informationRichard Purdie2019-02-2510-25/+32
| | | | | | | | | | | | | | | | Add the OEHasPackage decorator to a variety of tests so they determine automatically if they should run against a given image. To ensure tests can do this we need to move target operations such as scp commands into the tests and out of the class startup/teardown. (From OE-Core rev: 60d6580b85714b8960a964e775d76a7f937f5e5a) (From OE-Core rev: 03b7658369bb7c1c8fbbaac7d9e281617cc16135) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/python: clean up Python testRoss Burton2019-02-251-30/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently this is three test cases: 1) test_python_exists. Fail if python3 isn't in PATH. 2) test_python_stdout. Run a Python script and check the output is as expected 3) test_python_testfile. Check that a file test_python_stdout wrote to exists. (1) should be a setup and skip the test module if it isn't present. (2) and (3) should be merged, there's no point copying over a two line Python file, and the test doesn't verify that the file doesn't exist in the first place. Rewrite the test to check that Python is present in a class setup so the entire test is skipped if it isn't and do some simple rot13 to verify that bytecode is being executed correctly. (From OE-Core rev: a35be5f32b4fe70b18ac1e2eccfd94558cecfbba) (From OE-Core rev: babdd2f6addb06c23e4882107be07034ca49bcb8) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/cases/python: use python 3 rather than python 2Alexander Kanavin2019-02-251-3/+3
| | | | | | | | | | | | | | For example, core-image-sato skipped the test alltogether, as it no longer pulls in Python 2.x at all. (From OE-Core rev: 5ad0fe9ac6b6362011a17afaa7bee8e788093915) (From OE-Core rev: bde50fc78ae75fd585f8914e458d65c328857fb2) Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/cases/rpm.py: change to use base-passwd-docChen Qi2019-02-251-13/+13
| | | | | | | | | | | | | | | | | | | | | The test cases assume that rpm-doc is built out, as it says it its comment. This is not always true. And it sometimes results in following error. | cls.tc.target.copyTo(test_file, dst) | UnboundLocalError: local variable 'test_file' referenced before assignment Change to use base-passwd-doc, as this package is more likely to be built out than rpm-doc. (From OE-Core rev: 2e23543b48921182307065c1fa9e8b9d7fbb3cdc) (From OE-Core rev: 1ce378ce07d2c49f40054893a623456c8471e177) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa: replace Alex Kanavin's @intel email address with a personal oneAlexander Kanavin2019-02-254-6/+6
| | | | | | | | | | | | | | As I will be leaving Intel, this address will no longer be valid, so swap it for my personal one for now. (From OE-Core rev: ea58ff101e28dfda3410de66d775df3d8a1e5a96) (From OE-Core rev: 61bca5a7f6b3fc03cd88cbf8867708d28e0a3522) Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa: make it work for multiple usersRobert Yang2019-02-254-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | There are failures when multiple users run oe-selftest on the same host: PermissionError: [Errno 13] Permission denied: '/tmp/oe-saved- tests/201812250324_qemu' This is because /tmp/oe-saved-tests was created by user A, while user B tries to write data in it, then the error will happen. This patch can fix the problem. Move the dumped data to ${LOG_DIR}/runtime-hostdump/ rather than /tmp/oe-saved-tests/ to fix the problem. (From OE-Core rev: e219fe5329599cd6c3682f521eaee3852a2c8980) (From OE-Core rev: 872c6e5101f4f27dcfc63d141d1b6568f46d2b5f) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta/classes/testimage.bbclass: Only validate IMAGE_FSTYPES when is QEMUAníbal Limón2019-02-251-6/+7
| | | | | | | | | | | | | | | | | When use simpleremote target the flash/boot process is executed manually, the IMAGE_FSTYPES validation is only needed when execute testimage against qemu. The supported_fstypes comes from oeqa.core.target.qemu module. (From OE-Core rev: e7dc5963adbacc091fe8943119262166977623ad) (From OE-Core rev: 05896e2f83ffef5262ccd3a0fa20b81b2a878957) Signed-off-by: Aníbal Limón <anibal.limon@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* testimage.bbclass: remove boot parameter systemd.log_targetKai Kang2019-02-251-7/+1
| | | | | | | | | | | | | | | | | | | | | | | Boot parameter systemd.log_target=console affects command journalctl's output and causes oe selftest case test_systemd_boot_time fail to pass. | Error at obtaining the boot time from journalctl | RESULTS: | RESULTS - systemd.SystemdJournalTests.test_systemd_boot_time - Testcase -1: SKIPPED (0.74s) systemd.log_target=console was introduced by oe-core commit a0bb649 and work with parameter systemd.log_level to enable systemd debug. systemd.log_level has been removed already, so remove systemd.log_target too to make case test_systemd_boot_time pass. (From OE-Core rev: caa776bdcf8ea34c857f45970370bf771075f4bc) (From OE-Core rev: 9d8a97b43c42b87c56d3b2ac318cb5482e86c397) Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* testimage: Add possibility to pass parmeters to qemuErik Botö2019-02-251-1/+4
| | | | | | | | | | | | | | | Add a variable called TEST_QEMUPARAMS in testimage.bbclass to make it possible to pass parameters to qemu. This can be useful for e.g. increasing the amount of RAM available during testimage runs. (From OE-Core rev: 1a9163f5779d233c884c8fd50e0812eabab4fdf3) (From OE-Core rev: 643457d350a921379600248f99d73374e6a2f5a2) Signed-off-by: Erik Botö <erik.boto@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* testimage: Add support for slirpYeoh Ee Peng2019-02-251-0/+5
| | | | | | | | | | | | | | | | Enable testimage to support qemu slirp. Configure "QEMU_USE_SLIRP" & "TEST_SERVER_IP" variables to enable slirp. [YOCTO#10713] (From OE-Core rev: 3df9ee85ce7fe52f0893fd33aea3bf1fcc6ead0a) (From OE-Core rev: 8bf8cbb82472a0547b62f94fafa5790cf67ff9cb) Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* testimage: Enable autorunning of the package manager testsuitesRichard Purdie2019-02-251-3/+1
| | | | | | | | | | | | | Now that the hangs in httpservice are fixed we can let these tests auto skip as appropriate. (From OE-Core rev: 42a0d70291d551578e21f590fcb85ca72a78ccb5) (From OE-Core rev: d82f2a0a17ecad5fdb2d2450f5048d00cf0448b1) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* testimage: Further cleanup DEFAULT_TEST_SUITESRichard Purdie2019-02-251-3/+1
| | | | | | | | | | | | | Now the test markup of the development tools tests is complete, this can be further tweaked to auto run the correct tests. (From OE-Core rev: bd4f8d12fe1f9f2643ee9e68fa2bb981134294fb) (From OE-Core rev: 4b9641505f39718fe820eb199ed6554662d4d4cf) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* testimage: Simplfy DEFAULT_TEST_SUITES logicRichard Purdie2019-02-251-20/+11
| | | | | | | | | | | | | | | | | | | | | | | | | Now that the tests have correct markup to automatically determine which images they can run against, clean up the default test suites logic to be simpler and not image specific. Some cleanup of the compiler tests still needs to be completed but this is a good first step. The only downside to this is more noise during testing as we now see many skipped messages for simple images like core-image-minimal. The auto type is being removed since it currently breaks badly due to the socat mandatory inclusion from the meta-selftest layer which is a problem which needs to be addressed seperately. (From OE-Core rev: 4966bc33845752eb0aeae54b72e8ba0146a7ed52) (From OE-Core rev: eeee75d0a51ab7c15457b89233b7bb5254d7ee0b) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> [Fix for sumo context] Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* runtime/dnf: Add new dnf test casesJose Perez Carranza2019-02-252-3/+48
| | | | | | | | | | | | | | | | | Add test cases to test “exclude” and “installroot“ options, also modify the logic of filtering packages on the feed to have all the packages needed by the tests. [YOCTO #10744] (From OE-Core rev: 1121806603c6f621d084b692216f3f616a0768dc) (From OE-Core rev: e1b050f53ece2a31cd6866d2d737d7c67a44cea4) Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel: don't assign the build user/hostFederico Sauter2019-02-251-2/+2
| | | | | | | | | | | | | | | | | | The KBUILD_BUILD_USER and KBUILD_BUILD_HOST variables were assigned at the kernel class level, which made it impossible to override them in the local configuration. By setting only the default values of those variables in the kernel class, it is now possible to override them as expected. (From OE-Core rev: a3e8cdf9c3ba966fa4b5a21235540eb0b00fb487) (From OE-Core rev: 2fac83ff87d9ad934250f712d2d0fd91fccb8728) Signed-off-by: Federico Sauter <federico.sauter@ableton.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa: Fix for QEMU_USE_KVMRobert Yang2019-02-253-14/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | Fixed: MACHINE = "qemux86" QEMU_USE_KVM = "qemux86" IMAGE_CLASSES += "testimage" $ oe-selftest -r runqemu.RunqemuTests.test_boot_rootfs [snip] File "/buildarea1/lyang1/poky/meta/lib/oe/types.py", line 122, in boolean raise ValueError("Invalid boolean value '%s'" % value) ValueError: Invalid boolean value 'qemux86' Now QEMU_USE_KVM can only be boolean, can not contain MACHINE any more, kvm will be enabled if target_arch == build_arch or both of them are x86 archs. (From OE-Core rev: 7c1a8a624cad8d967635c6cb5f99cf655bde3d44) (From OE-Core rev: de1b80f7f7b787f6b5b62c576ca6c62d2440031c) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* patch: reproducibility: Fix host umask leakageDouglas Royds2019-02-251-0/+1
| | | | | | | | | | | | | | | | | | | | | Some patch files create entirely new files, so their permissions are subject to the host umask. If such a file is later installed into a package with no change in permissions, it breaks the reproducibility of the package. This was observed on libpam, for instance: The patch file pam-security-abstract-securetty-handling.patch creates a new file (tty_secure.c). This file is later copied into the -dbg package with no change in permissions. (From OE-Core rev: 2a2bbd755b330cd63f7f6e2f2b374a3ae065b37a) (From OE-Core rev: ae10351f4aa443fc6df5a674b0aae0731304254d) Signed-off-by: Douglas Royds <douglas.royds@taitradio.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package.bbclass: fix python unclosed file ResourceWarningChen Qi2019-02-251-1/+2
| | | | | | | | | | | | | | | | | | | Fix the following warning. ResourceWarning: unclosed file <_io.TextIOWrapper name='/.../systemd/1_239-r0/debugsources.list' mode='a' encoding='UTF-8'> (From OE-Core rev: 91810a57f0edd8b37c5f3f989a5aca69d9a40b37) (From OE-Core rev: f8c111891066609ed40d11fee61ca9e29b5b6029) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> [Fixup for sumo context] Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package: Rework PACKAGELOCK based upon sstate for do_packagedataRichard Purdie2019-02-251-14/+9
| | | | | | | | | | | | | | | | | | | | | | I think this lock dates from before we had sstate for do_packagedata. Since WORKDIR is recipe specific and we write into WORKDIR, we no longer need any write locks in the do_packagedata code itself, its handled by the sstate task lock for the final copy in at the end. The final write lock can be simply removed. The only time we need read locking is when actually reading data from the shared directory. We can therefore reduce the window the lock is held significantly as well, hence improving the speed of packagedata tasks running in parallel. (From OE-Core rev: f7106cdf2190d9ec59132a1cb2bb431d653cd9c5) (From OE-Core rev: 1af1e9c23965637ab4a23b3eaf64192694c5448d) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* testimage.bbclass: fix qemu_use_kvm handlingEmmanuel Roullit2019-02-251-2/+2
| | | | | | | | | | | | | | | | | | QEMU_USE_KVM can either be a boolean or a whitespace separated list of kvm supported machines. For the 'intel-corei7-64' machine, defined in meta-intel, kvm could not be used as the 'x86' substring is not part of its machine name. By changing the order of this 'or' statement and setting the 'QEMU_USE_KVM' variable to 'intel-corei7-64', it is possible to run the 'testimage' task with kvm support successfully. (From OE-Core rev: a22789253aa653dc50fb159b40910248c2f98dd4) (From OE-Core rev: 3383b1f9bb4aedfb88e888e88fe316e3f361c7bf) Signed-off-by: Emmanuel Roullit <emmanuel.roullit@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* testimage/testsdk/selftest: Avoid platform.distro_identifier deprecation ↵Richard Purdie2019-02-253-3/+4
| | | | | | | | | | | | | | warnings Use our own lsb function instead as used elsewhere by the codebase. (From OE-Core rev: acac45a6fd604d28ef7c23d67482af3d7e8bcfe3) (From OE-Core rev: 570256a64af5a3fa994a20a5cc4c74d59ffc361f) (From OE-Core rev: d58fe9d352ae7de857e7f55b88f6e7d35b2cd706) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/utils/qemurunner: set timeout to 60s for run_serialRobert Yang2019-02-253-3/+3
| | | | | | | | | | | | | | The 5s timeout for non-kvm is too short, especially when the load is high, which leads to unexpected errors, so set timeout to 60s by default. (From OE-Core rev: 8197d0f638a760fc03062c7a9009117d083d7ead) (From OE-Core rev: 6c930a8f5c11947c3b916efe23f33af462701bee) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* tzdata/tzcode-native: update to 2018iArmin Kuster2019-02-252-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2018i: Briefly: São Tomé and Príncipe switches from +01 to +00 on 2019-01-01. Changes to future timestamps Due to a change in government, São Tomé and Príncipe switches back from +01 to +00 on 2019-01-01 at 02:00. (Thanks to Vadim Nasardinov and Michael Deckers.) 2018h: Briefly: Qyzylorda, Kazakhstan moved from +06 to +05 on 2018-12-21. New zone Asia/Qostanay because Qostanay, Kazakhstan didn't move. Metlakatla, Alaska observes PST this winter only. Guess Morocco will continue to adjust clocks around Ramadan. Add predictions for Iran from 2038 through 2090. Changes to future timestamps Guess that Morocco will continue to fall back just before and spring forward just after Ramadan, the practice since 2012. (Thanks to Maamar Abdelkader.) This means Morocco will observe negative DST during Ramadan in main and vanguard formats, and in rearguard format it stays in the +00 timezone and observes ordinary DST in all months other than Ramadan. As before, extend this guesswork to the year 2037. As a consequence, Morocco is scheduled to observe three DST transitions in some Gregorian years (e.g., 2033) due to the mismatch between the Gregorian and Islamic calendars. The table of exact transitions for Iranian DST has been extended. It formerly cut off before the year 2038 in a nod to 32-bit time_t. It now cuts off before 2091 as there is doubt about how the Persian calendar will treat 2091. This change predicts DST transitions in 2038-9, 2042-3, and 2046-7 to occur one day later than previously predicted. As before, post-cutoff transitions are approximated. Changes to past and future timestamps Qyzylorda (aka Kyzylorda) oblast in Kazakhstan moved from +06 to +05 on 2018-12-21. This is a zone split as Qostanay (aka Kostanay) did not switch, so create a zone Asia/Qostanay. Metlakatla moved from Alaska to Pacific standard time on 2018-11-04. It did not change clocks that day and remains on -08 this winter. (Thanks to Ryan Stanley.) It will revert to the usual Alaska rules next spring, so this change affects only timestamps from 2018-11-04 through 2019-03-10. Change to past timestamps Kwajalein's 1993-08-20 transition from -12 to +12 was at 24:00, not 00:00. I transcribed the time incorrectly from Shanks. (Thanks to Phake Nick.) Nauru's 1979 transition was on 02-10 at 02:00, not 05-01 at 00:00. (Thanks to Phake Nick.) Guam observed DST irregularly from 1959 through 1977. (Thanks to Phake Nick.) Hong Kong observed DST in 1941 starting 06-15 (not 04-01), then on 10-01 changed standard time to +08:30 (not +08). Its transition back to +08 after WWII was on 1945-09-15, not the previous day. Its 1904-10-30 change took effect at 01:00 +08 (not 00:00 LMT). (Thanks to Phake Nick, Steve Allen, and Joseph Myers.) Also, its 1952 fallback was on 11-02 (not 10-25). This release contains many changes to timestamps before 1946 due to Japanese possession or occupation of Pacific/Chuuk, Pacific/Guam, Pacific/Kosrae, Pacific/Kwajalein, Pacific/Majuro, Pacific/Nauru, Pacific/Palau, and Pacific/Pohnpei. (Thanks to Phake Nick.) Assume that the Spanish East Indies was like the Philippines and observed American time until the end of 1844. This affects Pacific/Chuuk, Pacific/Kosrae, Pacific/Palau, and Pacific/Pohnpei. Changes to past tm_isdst flags For the recent Morocco change, the tm_isdst flag should be 1 from 2018-10-27 00:00 to 2018-10-28 03:00. (Thanks to Michael Deckers.) Give a URL to the official decree. (Thanks to Matt Johnson.) (From OE-Core rev: 100d0d0f24cabedd1a89b69ac8ffb05d85663761) (From OE-Core rev: 40679b9ee29b600a514f2fb82865a0fecca70bf7) Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* tzcode-native: update to 2018gArmin Kuster2019-02-251-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes to code When generating TZif files with leap seconds, zic no longer uses a format that trips up older 32-bit clients, fixing a bug introduced in 2018f. (Reported by Daniel Fischer.) Also, the zic workaround for QTBUG-53071 now also works for TZif files with leap seconds. The translator to rearguard format now rewrites the line "Rule Japan 1948 1951 - Sep Sat>=8 25:00 0 S" to "Rule Japan 1948 1951 - Sep Sun>=9 1:00 0 S". This caters to zic before 2007 and to Oracle TZUpdater 2.2.0 and earlier. (Reported by Christos Zoulas.) Changes to past time zone abbreviations Change HDT to HWT/HPT for WWII-era abbreviations in Hawaii. This reverts to 2011h, as the abbreviation change in 2011i was likely inadvertent. Changes to documentation tzfile.5 has new sections on interoperability issues. (From OE-Core rev: a24d0c174411a32a2793c89980ca87c4f9d98bc4) (From OE-Core rev: fc8a9e3929a6042bd3d68755799138f417413ab3) Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* tzdata: update to 2018gArmin Kuster2019-02-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes to code When generating TZif files with leap seconds, zic no longer uses a format that trips up older 32-bit clients, fixing a bug introduced in 2018f. (Reported by Daniel Fischer.) Also, the zic workaround for QTBUG-53071 now also works for TZif files with leap seconds. The translator to rearguard format now rewrites the line "Rule Japan 1948 1951 - Sep Sat>=8 25:00 0 S" to "Rule Japan 1948 1951 - Sep Sun>=9 1:00 0 S". This caters to zic before 2007 and to Oracle TZUpdater 2.2.0 and earlier. (Reported by Christos Zoulas.) Changes to past time zone abbreviations Change HDT to HWT/HPT for WWII-era abbreviations in Hawaii. This reverts to 2011h, as the abbreviation change in 2011i was likely inadvertent. Changes to documentation tzfile.5 has new sections on interoperability issues. (From OE-Core rev: 32e5dd919a61b1c245fb6a867d0ea4a71d394aca) (From OE-Core rev: 94c5cc56031b8558cdb75d5d4df05f6715618ab3) Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/utils/qemurunner: Print output when failed to loginRobert Yang2019-02-251-0/+1
| | | | | | | | | | | | | This is useful for debugging. (From OE-Core rev: da527d73f5eeae0f29b5f99aab757491d3f87ec7) (From OE-Core rev: 7fb953573635afb1b6482dbd9f51eb0f05731eae) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* busybox: Put klogd/syslogd alternative links in syslog packageRichard Purdie2019-02-251-1/+4
| | | | | | | | | | | | | | | Currently these are in ${PN} and ${PN}-syslog may get replaced by other packages but update-alternatives would error in the postinst if other files were installed first. Avoid the problems by putting the links in the correct package. (From OE-Core rev: ef11c54ba99af261a70ec31091216cdd1556da24) (From OE-Core rev: a0afcd457af14c3bf3a74514be0e8a029a4fcf63) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* testsdk: Improvements to the json loggingRichard Purdie2018-12-161-18/+18
| | | | | | | | | | | | | Tweak the preceeding commit to: * Add STARTTIME to the identifier to make it unique * Add MACHINE to the identifier * Use LOG_DIR * Store the layer config in a more natural json format * Drop '_' function prefixes (From OE-Core rev: 31f0c5e59c7fb0ae0915de584fbfcf3d95bbb061) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* testimage: Improvements to the json loggingRichard Purdie2018-12-161-14/+14
| | | | | | | | | | | | | | Tweak the preceeding commit to: * Add STARTTIME to the identifier to make it unique * Log DISTRO * Use LOG_DIR * Store the layer config in a more natural json format * Drop '_' function prefixes (From OE-Core rev: fd07da4d46a8167807f6ce872497fbdc812494ad) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest/esdk: Fix typo causing test failureRichard Purdie2018-12-161-1/+1
| | | | | | | | | | | | | 2018-12-06 23:19:24,564 - oe-selftest - INFO - Traceback (most recent call last): File "/media/build1/poky-sumo/meta/lib/oeqa/core/case.py", line 32, in _oeSetUpClass clss.setUpClassMethod() File "/media/build1/poky-sumo/meta/lib/oeqa/selftest/cases/eSDK.py", line 78, in setUpClass cls.tmpdir_eSDKQA = cls.tempdirobj.name AttributeError: type object 'oeSDKExtSelfTest' has no attribute 'tempdirobj' (From OE-Core rev: 2c60908a2039d333a9fe2651622750ff6ed4cce1) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-14 06:34:38 +0000