summaryrefslogtreecommitdiffstats
path: root/meta
Commit message (Collapse)AuthorAgeFilesLines
* opensbi: append LDFLAGS to TARGET_CC_ARCHThomas Perrot2024-02-021-0/+2
| | | | | | | | | | | | | | | To solve the following GNU_HASH error: ERROR: opensbi-1.4-r0 do_package_qa: QA Issue: File /share/opensbi/lp64/generic/firmware/fw_dynamic.elf in package opensbi doesn't have GNU_HASH (didn't pass LDFLAGS?) File /share/opensbi/lp64/generic/firmware/fw_payload.elf in package opensbi doesn't have GNU_HASH (didn't pass LDFLAGS?) File /share/opensbi/lp64/generic/firmware/fw_jump.elf in package opensbi doesn't have GNU_HASH (didn't pass LDFLAGS?) [ldflags] [YOCTO #15370] -- https://bugzilla.yoctoproject.org/show_bug.cgi?id=15370 (From OE-Core rev: b82e1e99feb8b0d70ff4c4bcac67336d562d2e53) Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* openssl: backport fix for CVE-2023-6129Ross Burton2024-02-022-0/+114
| | | | | | | | (From OE-Core rev: 7fa10f29b31f8aae572026a00a6354aec539d044) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/package_rpm: correctly escape percent charactersAlexander Kanavin2024-02-021-8/+8
| | | | | | | | | | | | | | | | | | This many characters doesn't work with rpm 4.19 packaging (as shown by nodejs recipes), and per documentation a single escape is enough: https://github.com/rpm-software-management/rpm/blob/rpm-4.19.x/docs/manual/spec.md#shell-globbing It also should be done in a function, and just before writing out the corrected filename to .spec, not earlier where the path may still be needed for file operations (such as gettings file attributes). (From OE-Core rev: 6d9fe2623c37e405a80acf71633f7291ecdde533) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* grub2: ignore CVE-2023-4001, this is Red Hat-specificRoss Burton2024-02-021-0/+1
| | | | | | | | (From OE-Core rev: f99b25355133fe8f65a55737270e67ea10b79d52) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* dropbear: remove unnecessary lineEtienne Cordonnier2024-02-021-2/+0
| | | | | | | | | | | | This line was added in 703e3faaec8c5a22, however the default value of FILES:${PN} contains "${bindir}/*", so this directory does not need to be explicitly added. (From OE-Core rev: 53f9fa7b7913f4d8a480e85a7b6a943f1125bb19) Signed-off-by: Etienne Cordonnier <ecordonnier@snap.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* mesa: Upgrade 23.3.3 -> 23.3.4Fabio Estevam2024-02-023-1/+1
| | | | | | | | | | | | Mesa 23.3.4 release notes: https://lists.freedesktop.org/archives/mesa-announce/2024-January/000745.html (From OE-Core rev: c8abc906d1c85ebc967a0aa0e8e52bd4ed09708d) Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: Add custom mount args for /var/libColin McAllister2024-02-022-2/+4
| | | | | | | | | | | Adds bitbake variable to set additional mount flags for the /var/lib overlayfs or bind mount when using a read-only root filesystem. This can be used to set additional options like "-o nodev". (From OE-Core rev: c3109e40e2c2c881996dd3fcc95fca74f098646d) Signed-off-by: Colin McAllister <colin.mcallister@garmin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* armv8/armv9: Avoid using -march when -mcpu is chosenKhem Raj2024-02-0229-29/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current include logic goes into generic arm v8/v9 architecture tunes and adds corresponding -march option after synthesizing it from various tune fragments, this is fine for a machine which is using armv8/armv9 based tunes but cortex tunes are intentionally using -mcpu option based on selected tune value. So when cortex based default tune is selected for a machine, it will add both -mcpu and -march to the compiler commandline which can result in invalid combinations for this pair in gcc's own logic. This can then result in compiler warnings/errors reporting this e.g. aarch64-yoe-linux-gcc -mcpu=cortex-a72.cortex-a53 -march=armv8-a+crc+crypto -mbranch-protection=standard ... cc1: error: switch '-mcpu=cortex-a72.cortex-a53' conflicts with '-march=armv8-a+crc+crypto' switch and resulted in options '+crc+crypto' being added [-Werror] This is seen in lot of configure test results in glibc 2.39 and the warning is promoted to errors by gcc in some of these checks especially with gcc-14, the logs also show it as warning in other places in configure checks. mcpu option will compute relevant march implicitly as it specifies a cpu implementation and this will be the right value to use, therefore do not specify -march when -mcpu is already describing the cpu. (From OE-Core rev: e64f0c1b6ac5d598a79a21de5f3060f83cb9523e) Signed-off-by: Khem Raj <raj.khem@gmail.com> Cc: Ross Burton <ross.burton@arm.com> Cc: Jon Mason <jdmason@kudzu.us> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* qemu: Allow native and nativesdk versions on Linux older then 4.17Mark Hatle2024-02-023-0/+349
| | | | | | | | | | | | | | | | | | | | | | | Linux kernel 4.17 introduced two new mmap flags, MAP_FIXED_NOREPLACE and MAP_SHARED_VALIDATE. Starting with QEMU 8.1, these flags are now used and required for proper system operation. In order to build and run on a system older then 4.17, we need to emulate this new behavior. Not having a newer kernel could result in the mmap memory being allocated in a way that will cause failures without QEMU checking for these conditions. Note, memory allocation issues are rare in my experience so this is more of a 'just-in-case' behavior. SDK_OLDEST_KERNEL is currently set to 3.2.0, the only way this can claim that qemu works in an SDK is by checking the return values to emulate the expected behavior. (From OE-Core rev: 4eb0a83c7851e2eb6d7890a130dfe50f37ff8ac9) Signed-off-by: Mark Hatle <mark.hatle@amd.com> Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* go: update 1.20.12 -> 1.20.13Jose Quaresma2024-02-028-4/+4
| | | | | | | | | | | | | | | | | | | Upgrade to latest 1.20.x release [1]: $ git log --oneline go1.20.12..go1.20.13 a95136a88c (tag: go1.20.13) [release-branch.go1.20] go1.20.13 5c38c04957 [release-branch.go1.20] crypto/tls: align FIPS-only mode with BoringSSL policy 9e4abed39b [release-branch.go1.20] crypto/internal/boring: upgrade module to fips-20220613 95afc744a7 [release-branch.go1.20] runtime: put ReadMemStats debug assertions behind a double-check mode 8cb86b5f85 [release-branch.go1.20] os/signal: skip nohup tests on darwin builders 59ffd3b90d [release-branch.go1.20] os/signal: remove go t.Run from TestNohup [1] https://github.com/golang/go/compare/go1.20.12...go1.20.13 (From OE-Core rev: 9c67951634c2effd4fbe229338715ccb49378341) Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cmake.bbclass: use --installAdrian Freihofer2024-02-021-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | Since version 3.15 CMake provides a command-line signature to install an already-generated project binary tree. This may be used after building a project to run installation without using the generated build system or the native build tool. This is a small improvement, for regular bitbake calls. CMake does not check the dependencies again which is expected to be faster. The main motivation for this change is using CMake from an SDK context. With this change it is possible to initiate the compile step from an IDE and later on initiating the install step via bitbake which runs the install step on pseudo. This is also what the meson.bbclass already does with the --no-rebuild option. (From OE-Core rev: 72388593d62d45d54790710b9665eb8f13897c8c) Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gnutls: Upgrade 3.8.2 -> 3.8.3Simone Weiß2024-01-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Upgrade version to adress recent CVE findings. Changelog ========= ** libgnutls: Fix more timing side-channel inside RSA-PSK key exchange [GNUTLS-SA-2024-01-14, CVSS: medium] [CVE-2024-0553] ** libgnutls: Fix assertion failure when verifying a certificate chain with a cycle of cross signatures [GNUTLS-SA-2024-01-09, CVSS: medium] [CVE-2024-0567] ** libgnutls: Fix regression in handling Ed25519 keys stored in PKCS#11 token certtool was unable to handle Ed25519 keys generated on PKCS#11 with pkcs11-tool (OpenSC). This is a regression introduced in 3.8.2. (From OE-Core rev: 705d2972b38efc9f331e3635c07ca92f8812b365) Signed-off-by: Simone Weiß <simone.p.weiss@posteo.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* xwayland: Upgrade 23.2.3 -> 23.2.4Khem Raj2024-01-301-1/+1
| | | | | | | | | | | Cumulative Fixes for CVE-2023-6816, CVE-2024-0229, CVE-2024-21885, CVE-2024-21886, CVE-2024-0408, CVE-2024-0409 (From OE-Core rev: 6a2e44340c8ae2a60e33696ad944e327a24479d5) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* python3-yamllint: add missing dependencyKonrad Weihmann2024-01-301-1/+1
| | | | | | | | | | yamllint requires pathspec module to be available (From OE-Core rev: 59a89493f4b1f450139956f872d606829499b79d) Signed-off-by: Konrad Weihmann <kweihmann@outlook.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* qemu: fix target build with ccache enabledMartin Jansa2024-01-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * with ccache inheritted, the BUILD_CC is 'ccache gcc', but because of missing quote it ends passing just ccache to host-cc which gets stripped and then it calls compiler[0] on empty compiler variable and breaks meson as shown in: http://errors.yoctoproject.org/Errors/Details/751436/ python version: Python 3.12.1 Traceback (most recent call last): File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/qemu/8.2.0/recipe-sysroot-native/usr/lib/python3.12/site-packages/mesonbuild/mesonmain.py", line 194, in run return options.run_func(options) ^^^^^^^^^^^^^^^^^^^^^^^^^ File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/qemu/8.2.0/recipe-sysroot-native/usr/lib/python3.12/site-packages/mesonbuild/msetup.py", line 358, in run app.generate() File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/qemu/8.2.0/recipe-sysroot-native/usr/lib/python3.12/site-packages/mesonbuild/msetup.py", line 181, in generate return self._generate(env, capture, vslite_ctx) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/qemu/8.2.0/recipe-sysroot-native/usr/lib/python3.12/site-packages/mesonbuild/msetup.py", line 203, in _generate intr = interpreter.Interpreter(b, user_defined_options=user_defined_options) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/qemu/8.2.0/recipe-sysroot-native/usr/lib/python3.12/site-packages/mesonbuild/interpreter/interpreter.py", line 331, in __init__ self.parse_project() File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/qemu/8.2.0/recipe-sysroot-native/usr/lib/python3.12/site-packages/mesonbuild/interpreterbase/interpreterbase.py", line 132, in parse_project self.evaluate_codeblock(self.ast, end=1) File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/qemu/8.2.0/recipe-sysroot-native/usr/lib/python3.12/site-packages/mesonbuild/interpreterbase/interpreterbase.py", line 198, in evaluate_codeblock raise e File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/qemu/8.2.0/recipe-sysroot-native/usr/lib/python3.12/site-packages/mesonbuild/interpreterbase/interpreterbase.py", line 190, in evaluate_codeblock self.evaluate_statement(cur) File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/qemu/8.2.0/recipe-sysroot-native/usr/lib/python3.12/site-packages/mesonbuild/interpreterbase/interpreterbase.py", line 204, in evaluate_statement return self.function_call(cur) ^^^^^^^^^^^^^^^^^^^^^^^ File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/qemu/8.2.0/recipe-sysroot-native/usr/lib/python3.12/site-packages/mesonbuild/interpreterbase/interpreterbase.py", line 530, in function_call res = func(node, func_args, kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/qemu/8.2.0/recipe-sysroot-native/usr/lib/python3.12/site-packages/mesonbuild/interpreterbase/decorators.py", line 260, in wrapper return f(*nargs, **wrapped_kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/qemu/8.2.0/recipe-sysroot-native/usr/lib/python3.12/site-packages/mesonbuild/interpreterbase/decorators.py", line 579, in wrapper return f(*wrapped_args, **wrapped_kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/qemu/8.2.0/recipe-sysroot-native/usr/lib/python3.12/site-packages/mesonbuild/interpreter/interpreter.py", line 1309, in func_project self.add_languages(proj_langs, False, MachineChoice.BUILD) File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/qemu/8.2.0/recipe-sysroot-native/usr/lib/python3.12/site-packages/mesonbuild/interpreter/interpreter.py", line 1476, in add_languages success = self.add_languages_for(args, required, for_machine) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/qemu/8.2.0/recipe-sysroot-native/usr/lib/python3.12/site-packages/mesonbuild/interpreter/interpreter.py", line 1519, in add_languages_for comp = compilers.detect_compiler_for(self.environment, lang, for_machine, skip_sanity_check) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/qemu/8.2.0/recipe-sysroot-native/usr/lib/python3.12/site-packages/mesonbuild/compilers/detect.py", line 115, in detect_compiler_for comp = compiler_from_language(env, lang, for_machine) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/qemu/8.2.0/recipe-sysroot-native/usr/lib/python3.12/site-packages/mesonbuild/compilers/detect.py", line 112, in compiler_from_language return lang_map[lang](env, for_machine) if lang in lang_map else None ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/qemu/8.2.0/recipe-sysroot-native/usr/lib/python3.12/site-packages/mesonbuild/compilers/detect.py", line 614, in detect_c_compiler return _detect_c_or_cpp_compiler(env, 'c', for_machine) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "TOPDIR/tmp-glibc/work/core2-64-oe-linux/qemu/8.2.0/recipe-sysroot-native/usr/lib/python3.12/site-packages/mesonbuild/compilers/detect.py", line 286, in _detect_c_or_cpp_compiler compiler_name = os.path.basename(compiler[0]) ~~~~~~~~^^^ IndexError: list index out of range ... Project name: qemu Project version: 8.2.0 C compiler for the host machine: ccache x86_64-oe-linux-clang -target x86_64-oe-linux -m64 -march=core2 -mtune=core2 -msse3 -mfpmath=sse -mlittle-endian --dyld-prefix=/usr -Qunused-arguments --sysroot=TOPDIR/tmp-glibc/work/core2-64-oe-linux/qemu/8.2.0/recipe-sysroot -m64 -mcx16 (clang 17.0.6 "clang version 17.0.6 (https://github.com/llvm/llvm-project 6009708b4367171ccdbf4b5905cb6a803753fe18)") C linker for the host machine: x86_64-oe-linux-clang -target x86_64-oe-linux -m64 -march=core2 -mtune=core2 -msse3 -mfpmath=sse -mlittle-endian --dyld-prefix=/usr -Qunused-arguments --sysroot=TOPDIR/tmp-glibc/work/core2-64-oe-linux/qemu/8.2.0/recipe-sysroot -m64 -mcx16 ld.lld 17.0.6 ../qemu-8.2.0/meson.build:1:0: ERROR: Unhandled python exception This is a Meson bug and should be reported! ERROR: meson setup failed (From OE-Core rev: 7e55102cff9ddecb4f0acbb3bcafa703dd9808fd) Signed-off-by: Martin Jansa <martin.jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/qemurunner: Handle rare shutdown raceRichard Purdie2024-01-301-2/+6
| | | | | | | | | | | | | | The pid file can disappear when qemu is shutting down leading to a file not found race before it is read. Tweak the code to handle this and fix a rare but annoying race error case. [YOCTO #15036] (From OE-Core rev: 8c07aac9d55f92fe5fbe3cab9f006efecf266328) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* qemu: Replace the basename patch with backportKhem Raj2024-01-273-58/+51
| | | | | | | | | | Backport the patch that got applied to fix this issue upstream (From OE-Core rev: 952c94988cf1cf093668e9ac7020485c51cf3a58) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* piglit: Update to latest revisionFabio Estevam2024-01-271-1/+1
| | | | | | | | | | Update to the latest piglit revision. (From OE-Core rev: 83e1fd36408d6789899e98b4d6e47eb69914a1bf) Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* python3: Initialize struct termios before calling tcgetattr()Khem Raj2024-01-272-0/+43
| | | | | | | | | | | | | | | | Fixes ptest failures on python 3.12 Failed ptests: {'python3': ['test_tcgetattr', 'test_cfmakeraw', 'test_setcbreak', 'test_setraw', 'python3']} (From OE-Core rev: 515e7cf61c4ce5f6d572562ec851f01dade5cca0) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lttng-modules: upgrade 2.13.10 -> 2.13.11Denys Dmytriyenko2024-01-274-189/+1
| | | | | | | | | | | | Changelog: https://lwn.net/Articles/957396/ Drop 2 backported patches and 1 implemented differently upstream. (From OE-Core rev: 90eef01e2d7fbde43e8325f075383d0931924cc8) Signed-off-by: Denys Dmytriyenko <denis@denix.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* elfutils: Fix build with gcc trunkKhem Raj2024-01-272-0/+40
| | | | | | | | | | | | | | | | | Fixes a build issue seen with latest gcc trunk. Fixes | ../../elfutils-0.189/tests/elfstrmerge.c: In function 'main': | ../../elfutils-0.189/tests/elfstrmerge.c:450:32: error: 'calloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Werror=calloc-transposed-args] | 450 | newscnbufs = calloc (sizeof (void *), newshnums); | | ^~~~ | ../../elfutils-0.189/tests/elfstrmerge.c:450:32: note: earlier argument should specify number of elements, later size of each element | cc1: all warnings being treated as errors (From OE-Core rev: 3817ac3130e8858b3445872ff74b39c21969822a) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* xz: Add ptest supportChi Xu2024-01-273-2/+53
| | | | | | | | | | | | | | | | | | | There are two types of cases: executables and POSIX shell scripts. All test cases PASS. Add xz-ptest to PTESTS_FAST because test duration less than 30s on qemux86-64. root@qemux86-64:~# ptest-runner xz START: ptest-runner 2024-01-26T03:32 BEGIN: /usr/lib/xz/ptest === test_bcj_exact_size.c === PASS: test_exact_size PASS: test_empty_block (From OE-Core rev: 2704983f972e4fe1d4e0bee8491a07eb4f629346) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gtk4: update 4.12.4 -> 4.12.5Markus Volk2024-01-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Overview of Changes in 4.12.5, 17-01-2024 ========================================= * GtkColumnView: - Fix a crash on dispose * GtkEmojiChooser: - Update to CLDR v44 - Add more translations * GtkFileDialog: - Return an error if no file is selected - Make closing the portal file chooser work * GtkDropDown: - Fix display of the initial checkmark * GtkShortcutsWindow: - Reduce the minimum width * GDK: - Make the png loader safer against overflow * Windows: - Use new clipboard api * Wayland: - Fix cursor handling with graphics tablets * macOS: - Silence secure-restore message - Fix build on macOS < 10.13 * Translation updates Basque British English Catalan Chinese (China) Czech Georgian German Hebrew Indonesian Lithuanian Persian Polish Romanian Russian Slovenian Swedish Turkish Ukrainian Vietnamese (From OE-Core rev: 2dd196a048de8f45095ffa8ada2a2f3b15bcc866) Signed-off-by: Markus Volk <f_l_k@t-online.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rpm: update 4.18.1 -> 4.19.1Alexander Kanavin2024-01-2723-383/+328
| | | | | | | | | | | | | | | | | Upstream has replaced autoconf with cmake, which necessitates a rewrite of the recipe and available options, and a rebase to cmake of 0001-Do-not-hardcode-lib-rpm-as-the-installation-path-for.patch Correct a mistake in 0001-Do-not-read-config-files-from-HOME.patch : the patch was removing the NULL marker at the end of function arguments, and 0002-Add-support-for-prefixing-etc-from-RPM_ETCCONFIGDIR-.patch was restoring it (in addition to the actual change the patch was making). Now both patches preserve the NULL terminator. (From OE-Core rev: 38549d462b399e3a63335f60a44c8bbced98639a) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/rpm: fail tests if test rpm file cannot be foundAlexander Kanavin2024-01-271-7/+11
| | | | | | | | | | | | | | | | | | Discovery of the test file was happening in a class initializer. That block of code cannot fail (it's not a test), and so it falls through to completion even if the needed file could not be found. Then the tests themselves fail later due to class variables not being set, but all information as to why is already lost at that point. This converts the discovery to a helper function called from the tests, so that the function can fail the tests precisely when the problems occur. (From OE-Core rev: 5d7a6ede105ea1efc9c324c7029f9d08dadf7255) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/package_rpm: set bogus locations for passwd/group filesAlexander Kanavin2024-01-271-0/+2
| | | | | | | | | | | | | | | | | Since https://github.com/rpm-software-management/rpm/commit/f3eaeeb7341085e1850e914350cf1f33d538320d rpm does its own parsing of /etc/passwd and /etc/group instead of relying on getpwnam() and friends. This has an unfortunate effect of leaking build host uid/gid values for users and groups into the cpio header inside rpm file (where previously those were always zero). Installation of rpm packages relies on rpm header to set files ownership, and that is a different structure that is build from .spec information, so we can avoid host contamination by setting the paths to something bogus. (From OE-Core rev: ac8ea64bb39a5e56599e078c7e6cd056a2aa4144) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/package_rpm: use weak user/group dependenciesAlexander Kanavin2024-01-271-0/+1
| | | | | | | | | | | | | | | rpm 4.19 automatically generates provides and depends for user and groups: https://github.com/rpm-software-management/rpm/blob/rpm-4.19.x/docs/manual/users_and_groups.md#dependencies This mechanism relies on sysusers.d for the 'provides' part, and thus is systemd-only at best. So we need to disable it for now, otherwise image generation fails with unresolved dependencies. (From OE-Core rev: 10064e364f015ad3c0c8d63511cd9a7da5e22c69) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/package_rpm: write file permissions and ownership explicitly into .specAlexander Kanavin2024-01-271-6/+28
| | | | | | | | | | | | | | | | | | | | | | Per https://github.com/rpm-software-management/rpm/commit/77d3529c31ca090a40b8d3959a0bcdd721a556d6 rpm 4.19.1+ will not consider actual filesystem permissions and ownership, and will quietly default to root if not expictly set otherwise in .spec file. There's also additional diagnostics (printing what is in passwd/group) when user/group name lookup against the sysroot fails. That is never supposed to happen, and yet there was one report that it did: https://autobuilder.yoctoproject.org/typhoon/#/builders/44/builds/8493/steps/23/logs/stdio Investigating that issue led to the first three commits in this patchset: sysroot user management postinsts: run with /bin/sh -e to report errors when they happen classes/multilib: expand PACKAGE_WRITE_DEPS in addition to DEPENDS classes/staging: capture output of sysroot postinsts into logs (From OE-Core rev: a9db9a56617459e8f6f6dd466f2e18a7eed5c1e3) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/staging: capture output of sysroot postinsts into logsAlexander Kanavin2024-01-271-2/+2
| | | | | | | | | | | | | | | | | This particularly helps with user management postinsts as otherwise there's no trace left of what was run, in which order, and what was the output. Here's an example from the logs: NOTE: Running postinst /srv/storage/alex/yocto/build-multilib/tmp/work/x86_64-pokymllib64-linux/lib64-quilt/0.67/lib64-recipe-sysroot/usr/bin/postinst-lib64-base-passwd, output: b'/srv/storage/alex/yocto/build-multilib/tmp/work/x86_64-pokymllib64-linux/lib64-quilt/0.67/recipe-sysroot-native/usr/sbin/useradd\nRunning useradd commands...\nNOTE: lib64-ptest-runner: Performing useradd with [--root /srv/storage/alex/yocto/build-multilib/tmp/work/x86_64-pokymllib64-linux/lib64-quilt/0.67/lib64-recipe-sysroot --system --no-create-home --home / --user-group ptest]\n' NOTE: Running postinst /srv/storage/alex/yocto/build-multilib/tmp/work/x86_64-pokymllib64-linux/lib64-quilt/0.67/lib64-recipe-sysroot/usr/bin/postinst-useradd-lib64-ptest-runner, output: b'/srv/storage/alex/yocto/build-multilib/tmp/work/x86_64-pokymllib64-linux/lib64-quilt/0.67/recipe-sysroot-native/usr/sbin/useradd\nRunning useradd commands...\nNOTE: lib64-ptest-runner: Performing useradd with [--root /srv/storage/alex/yocto/build-multilib/tmp/work/x86_64-pokymllib64-linux/lib64-quilt/0.67/lib64-recipe-sysroot --system --no-create-home --home / --user-group ptest]\nNOTE: lib64-ptest-runner: user ptest already exists, not re-creating it\n' (From OE-Core rev: a4dc96293268804b214a02e08d266205fad428b0) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/multilib: expand PACKAGE_WRITE_DEPS in addition to DEPENDSAlexander Kanavin2024-01-272-1/+2
| | | | | | | | | | | | | | | | Otherwise, PACKAGE_WRITE_DEPS would contain non-multilib variants of dependencies even when building multilib items, resulting in sysroots being populated with entirely wrong versions of them. This hasn't been noticed until now through sheer (bad) luck, I think, except in the cpio recipe, but the previous commit shows that the issues did occur, quietly. Every other recipe in oe-core and meta-oe does not prepend the multilib prefix. (From OE-Core rev: 234965cb88ccfa9c3a357928f7155b119044e8fc) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysroot user management postinsts: run with /bin/sh -e to report errors when ↵Alexander Kanavin2024-01-272-2/+2
| | | | | | | | | | | | | | | | | | | they happen This exposes the following failure in a multilib setup, when everything up to do_package_write_rpm is in sstate, but do_package_write_rpm is not (there's a similar fail for lib64-man-db, and the failures themselves will be fixed separately in the next commit): Exception: subprocess.CalledProcessError: Command '/srv/storage/alex/yocto/build-multilib/tmp/work/x86_64-pokymllib64-linux/lib64-quilt/0.67/recipe-sysroot/usr/bin/postinst-base-passwd' returned non-zero exit status 1. Subprocess output: install: cannot stat '/srv/storage/alex/yocto/build-multilib/tmp/work/x86_64-pokymllib64-linux/lib64-quilt/0.67/lib64-recipe-sysroot/usr/share/base-passwd/passwd.master': No such file or directory (From OE-Core rev: 5ffa333db28bc5d8e440c983fdf95589d332461d) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* python3-numpy: Use Large File Support version of fallocateOla x Nilsson2024-01-272-0/+52
| | | | | | | | | | This was supposed to always be the case from upstream but was exposed by the 64-bit-time QA checker when file function scanning was enabled. (From OE-Core rev: 3d556e59f658ac29615fb7a14b6ea48533122ff6) Signed-off-by: Ola x Nilsson <olani@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* native.bbclass: base_libdir unique from libdirWilliam Hauser2024-01-261-1/+1
| | | | | | | | | | | | Use STAGING_BASE_LIBDIR_NATIVE for the value of base_libdir instead of STAGING_LIBDIR_NATIVE. This will avoid conflicts between the two directories. (From OE-Core rev: 2d7e3d49378257bc02513275b988c8b194e9fd5a) Signed-off-by: William Hauser <william.hauser@meraki.net> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity: require bitbake 2.7.2 for the inherit_defer statementRoss Burton2024-01-261-1/+1
| | | | | | | (From OE-Core rev: 3f6840823656c5d36c1d7a467509ca13a79453a8) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rootfs-postcommands.bbclass: ignore comment mismatch in systemd_user_checkChen Qi2024-01-261-2/+1
| | | | | | | | | | | | | | | | | | The check was forcing every field to be identical, this is too strict. For example, if the comment differs, there's really no impact. For example, root user's comment is 'root' in passwd, and it's 'Super User' in sysusers.d/basic.conf. Such difference is not worth a warning. In fact, previous codes use 'lower()' to avoid warning between 'nobody' and 'Nobody', and what's more, another patch puts its own basic.conf.in in systemd's SRC_URI, but it changes 'Super User' to 'root'. Such changes are all unnecessary. We should just ignore comment mismatch. (From OE-Core rev: 2a700c3102b2233e71a157f0f88ed88496fa9fbf) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* systemd-boot: upgrade to 255.1Chen Qi2024-01-262-39/+0
| | | | | | | | | | | 0030-meson-Pass-all-static-pie-args-to-linker.patch is dropped as it's a backported patch and is now in the new 255.1 version. (From OE-Core rev: 6fdf03bd950e55ef7881041606f6e76141033716) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* systemd: upgrade to 255.1Chen Qi2024-01-266-132/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Patch changes: 0004-Move-sysusers.d-sysctl.d-binfmt.d-modules-load.d-to-.patch is removed because it has no real effect now. The /lib is now /usr/lib because 'usrmerge' is a required distro feature for systemd. 0002-binfmt-Don-t-install-dependency-links-at-install-tim.patch is refreshed for the new version to avoid patch-fuzz issue. 2. root user's home directory now defaults to "/root": The sysuers.d/basic.conf is still modified to respect the ROOT_HOME value, so if users set ROOT_HOME to "/home/root", the behavior is the same as before. However, this is only for backward compatibility. With this patch, The ROOT_HOME value is set to "/root" in init-manager-systemd.inc. This is because systemd's source codes are hardcoding "/root", and other values are not officially supported. See the list below. $ grep -rl '"/root"' src/ | grep -v 'src/test' src/core/namespace.c src/basic/user-util.c src/nss-systemd/nss-systemd.c src/nspawn/nspawn.c src/firstboot/firstboot.c src/shared/userdb.c src/shared/user-record.c $ grep -rl /root network/ factory/ sysctl.d/ sysusers.d/ rules.d/ tmpfiles.d/ units/ xorg/ tools/ sysusers.d/basic.conf.in tmpfiles.d/provision.conf units/emergency.service.in units/rescue.service.in tools/list-discoverable-partitions.py Previously, the recipe was just substituting sysusers.d/basic.conf.in, which is not enough to be treated as 'fully support'. I deliberately put a warning message in do_install to warn users about non "/root" ROOT_HOME value. Don't remove it until all above places are handled. 3. cgroupv2 is now the default. cgroupv2 is the default for systemd for many years and it's the default for distros such as ubuntu and fedora. Let's also use it as the default. (From OE-Core rev: ebafe463799b39025a0b24a0a14a2f02b6de9bac) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* systemd: refresh musl patches for v255.1Chen Qi2024-01-2623-271/+559
| | | | | | | | | | | The current patches are refreshed. A new patch is added: 0022-avoid-missing-LOCK_EX-declaration.patch (From OE-Core rev: b86b1f1265b87f73ea132a9c0d3b1978972ad41b) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/selftest: add test case to cover 'devtool modify -n' for a git recipeChen Qi2024-01-261-0/+22
| | | | | | | | | | | | | | | | | | | Add a test case to ensure the following error does not happen again for 'devtool modify -n'. Traceback (most recent call last): File "/buildarea2/chenqi/poky/scripts/devtool", line 349, in <module> ret = main() File "/buildarea2/chenqi/poky/scripts/devtool", line 336, in main ret = args.func(args, config, basepath, workspace) File "/buildarea2/chenqi/poky/scripts/lib/devtool/standard.py", line 924, in modify if not initial_revs["."]: KeyError: '.' (From OE-Core rev: 2c2ba5f9497462a190b849a69d8440149f80582a) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rust: Re-write RPATHs in the copies llvm-configKhem Raj2024-01-261-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ensure that it can still access the native-sysroot for dependencies, use ORIGIN to indicate this relative its install location, this also helps in this not getting into the output of llvm-config which could otherwise provide incorrect library paths target rust recipe builds ( cross compile ) calls llvm-config from target sysroot which works ok as long as C++ runtime it needs is available on build host e.g. libstdc++ etc. which is commonly the case, however when using clang and llvm runtime this falters since it should be using libc++ from native sysroot and if this does not exist on build machine this fails to find libc++ shared object and llvm-config fails to run. This ensures that llvm-config version in use is correctly relocated and can use shared libraries from native sysroot correctly. Adding ORIGIN to sysroot will look for the .so in same dir as the binary and there is the libc++.so.1 copied in place Fixes rust build with clang compiler. | /mnt/b/yoe/master/build/tmp/work/riscv64-yoe-linux/rust/1.74.1/recipe-sysroot/usr/lib/llvm-rust/bin/llvm-config: error while loading shared libraries: libc++.so.1: cannot open shared object file: No such file or director y | thread 'main' panicked at llvm.rs:551:19: | command did not execute successfully: "/mnt/b/yoe/master/build/tmp/work/riscv64-yoe-linux/rust/1.74.1/recipe-sysroot/usr/lib/llvm-rust/bin/llvm-config" "--version" | expected success, got: exit status: 127 (From OE-Core rev: 178ad50bf36f244f96159bb2f94e0d8849487931) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* pulseaudio: Update to 17.0Fabio Estevam2024-01-262-1/+2
| | | | | | | | | | | | | | | | | | | Update to pulseaudio 17.0 version. Since pulseaudio commit e96d278bfc51 ("daemon/meson.build: Install dbus policy in /usr, not /etc"), pulseaudio-system.conf needs to be passed in FILES, otherwise the following QA error is seen: ERROR: pulseaudio-17.0-r0 do_package: QA Issue: pulseaudio: Files/directories were installed but not shipped in any package: /usr/share/dbus-1 /usr/share/dbus-1/system.d /usr/share/dbus-1/system.d/pulseaudio-system.conf (From OE-Core rev: 123c75bd87330a81ba5b929c35ae34710ddcc449) Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* perl: Fix perl-module-* being ignored via COMPLEMENTARY_GLOBWilliam Lyu2024-01-261-8/+11
| | | | | | | | | | | | | | | | | | | When perl-modules is added via COMPLEMENTARY_GLOB, all perl-module-* packages recommended by perl-modules are ignored due to the defined behavior of COMPLEMENTARY_GLOB. This patch changes the relationship between perl-modules and all of its perl-module-* from RRECOMMENDS to RDEPENDS. This makes sense as perl-modules should represent the collection of all optional perl-module-* packages. After this patch, perl-modules itself is being RRECOMMENDED instead of the individual perl-module-* packages perl-modules represents. (From OE-Core rev: 738fa7ee2dadf7b4b96fc1e86dbde106d3b86ec3) Signed-off-by: William Lyu <William.Lyu@windriver.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* udev-extraconf: fix unmount directories containing octal-escaped charsJonathan GUILLOT2024-01-261-1/+1
| | | | | | | | | | | | | | USB devices are auto-mounted in a directory named like theirs labels. Special characters like whitespace are octal-escaped in /proc/mounts output. Using directly this output file as an argument for umount failed and the mount directory can't be removed as still busy. Using printf allows these special characters to be unescaped. (From OE-Core rev: 37f17625d931a06888388682dc2b1f5a2d298125) Signed-off-by: Jonathan GUILLOT <jonathan@joggee.fr> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gcc: Update status of CVE-2023-4039Simone Weiß2024-01-261-0/+1
| | | | | | | | | | | | This is fixed via a patch added in gcc-13.2.inc already, but still reported e.g. for libgcc as it is not defining an own source but use the shared gcc-source. (From OE-Core rev: 301d45eacfd4ae6bddfb13207e2af9e8b4662bc8) Signed-off-by: Simone Weiß <simone.p.weiss@posteo.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* python3-yamllint: Add recipeRyan Eatmon2024-01-262-0/+16
| | | | | | | | | | | | | | | | Add recipe for yamllint. There is an upcoming change in u-boot where the binman tool is now configured to call yamllint to verify the configs during compile time. There was a previous patch a year ago from Trevor Woerner that never made it into oe-core. This patch is a reworking of his patch but pointing to a newer version. (From OE-Core rev: 128cfc5222752a6337a9cbb9bc9023c13ee19f2f) Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* p11-kit: fix parallel build failuresKai Kang2024-01-262-1/+36
| | | | | | | | | | | | | | | | | | | | | | | It fails occasionally with missing generated header files: | ../git/common/asn1.c:42:10: fatal error: openssl.asn.h: No such file or directory | 42 | #include "openssl.asn.h" | | ^~~~~~~~~~~~~~~ | compilation terminated. According to meson manual page: https://mesonbuild.com/Wrap-best-practices-and-tips.html#declare-generated-headers-explicitly 'asn_h_dep' should be a dependency of static_library target 'libp11_asn1' to make sure that required header files generated before compile common/asn1.c. (From OE-Core rev: 523ae4ba677ee9d9925182689b2d70af6d3df7a8) Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* nativesdk-cairo: fix build errorKai Kang2024-01-261-1/+2
| | | | | | | | | | | | | | | | It fails to build nativesdk-cairo: | ../cairo-1.18.0/meson.build:381:13: ERROR: Can not run test applications in this cross environment. Set meson property ipc_rmid_deferred_release in cross-file to fix the issue which is as same as for target cairo (From OE-Core rev: e7388c4b351baa56be596af405730c8626b572da) Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* qemu: Fix segfaults in webkitgtk:do_compile on debian11Richard Purdie2024-01-262-0/+48
| | | | | | | | | | | | | Add a work around for segfaults we're seeing with qemu 8.2.0 when compiling webkitgtk on debian 11 autobuilder workers. The issue has been reported upstream to work out an official fix. [YOCTO #15367] (From OE-Core rev: 28ab691587e689872b2e2ddd210507cc2ae86f9b) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rust: Enable rust oe-selftest.Yash Shinde2024-01-262-1/+10
| | | | | | | | | | | | | | | | | | * Enable rust oe-selftest. * Include the dependent patches for rust oe-selftest in meta/recipes-devtools/rust/rust-source.inc * Disable rust oe-selftest for mips32 target (Rust upstream has classified it into tier 3 target, for which the Rust project does not build or test automatically) as it is unstable with rust tests. https://doc.rust-lang.org/nightly/rustc/platform-support.html#tier-3 * The testing is done on arm32, arm64, mips64, x86 and x86_64 targets on Ubuntu 22.04. (From OE-Core rev: 8f3a2841540fc4779bbd7e11d910edcdc8b47683) Signed-off-by: Yash Shinde <Yash.Shinde@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rust: Remove the test cases whose parent dir is also present in the exclude listYash Shinde2024-01-261-120/+0
| | | | | | | | | | | | | | | | | To avoid overlap and redundancy of rust tests, remove the test cases whose parent dir is already excluded. Tests which are failing from below dirs are removed as these dirs are already present in exclude list tests/run-make tests/rustdoc tests/mir-opt tests/ui-fulldeps (From OE-Core rev: 58a7f3efa9e31e2c7b90e6490f3e51f388e6a7ce) Signed-off-by: Yash Shinde <Yash.Shinde@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-16 15:44:11 +0000