summaryrefslogtreecommitdiffstats
path: root/meta/recipes-core/sysvinit
Commit message (Collapse)AuthorAgeFilesLines
* sysvinit rc: Use PSPLASH_FIFO_DIR for progress fifoMichael Gloff2020-10-061-6/+3
| | | | | | | | | | | | | | | psplash expects the fifo to be in /run or specified by PSPLASH_FIFO_DIR. This patch allows psplash to quit normally. Also, fix the work around of using echo directly into the fifo and use psplash-write. (From OE-Core rev: 0f395ab9d276595e75233dbdbb9ebb610bd1d3af) Signed-off-by: Michael Gloff <mgloff@emacinc.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> (cherry picked from commit 2b48bbd0a8de17df74d1fae12b5e4eb3c2c0fb90) Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit: Remove ${B} assignmentMichael Gloff2020-09-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | The VERSION variable is not set unless the top level Makefile is used as the version is derived from the Changelog. If VERSION is not set, none of the binaries built in the sysvinit recipe will have a valid version output. Before: INIT: version booting After: INIT: version 2.96 booting Using the top level Makefile does not cause any additional builds to occur. (From OE-Core rev: c8ad554db100b9fd16097fc8616b2af5390772e7) Signed-off-by: Michael Gloff <mgloff@emacinc.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> (cherry picked from commit 10992ad4f343d0f92d9d6246cc2e58effd3f3eeb) Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit: remove logsave.8Jeremy Puhlman2020-02-281-0/+1
| | | | | | | | | | | | logsave is a duplicate from e2fsprogs, which was already removed, but the man page remained which is also a duplicate. However it does not get modifed on install so it conflicts with the e2fsprogs version. (From OE-Core rev: 90ee5557c0e1d7088b5d9b7e66d70ff7fccac9a3) Signed-off-by: Jeremy A. Puhlman <jpuhlman@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit: Fix install order/dependencyMark Hatle2020-02-281-1/+1
| | | | | | | | | | | | | | | | | | It is possible for sysvinit to be installed before the passwd/group files are installed from base-passwd. This results in an warning that the shutdown group can't be found. Adding a dependeny on base-passwd will resolve this issue. This has similar symptoms to the problem that oe-core commit 0227e929021263c51d2e7db36224000fecb01f1c fixed. The fix is simular in that it ensures that base-passwd is installed first, just at runtime vs setscene time. (From OE-Core rev: c4fb899b19a905a2b027f33947b6ec56f55b81a6) Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit: Fix Reproducibility issueRichard Purdie2020-02-081-0/+1
| | | | | | | | | | | | | | | | | | | With a sequence like: bitbake sysvinit bitbake sysvinit -c clean bitbake sysvinit -c package_write_ipk -f then the resulting package has two files with group "root/70" rather than "root/shutdown". The issue is that of do_package is a setscene task, base-passwd isn't present. This patch fixes that dependency but there may be other cases of this problem around. [YOCTO #13776] (From OE-Core rev: 0227e929021263c51d2e7db36224000fecb01f1c) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit: update 2.88dsf -> 2.96Alexander Kanavin2019-12-097-178/+135
| | | | | | | | | | | | | Remove 0001-This-fixes-an-issue-that-clang-reports-about-mutlipl.patch, the problem has been fixed upstream. Rebase the other patches. License-Update: copyright years (From OE-Core rev: 5372e1acdd68367e64d13e19d1beb2d7b3e3c224) Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* distro_features_check: expand with MACHINE_FEATURES and COMBINED_FEATURES, ↵Denys Dmytriyenko2019-11-211-1/+1
| | | | | | | | | | | | | | | | rename Besides checking DISTRO_FEATURES for required or conflicting features, being able to check MACHINE_FEATURES and/or COMBINED_FEATURES may also be useful at times. Temporarily support the old class name with a warning about future deprecation. (From OE-Core rev: 5f4875b950ce199e91f99c8e945a0c709166dc14) Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit: Include sys/sysmacros.h for major/minor definitions on musl tooKhem Raj2019-07-231-60/+39
| | | | | | | | | | | | Fixes musl issue implicit declaration of function 'minor' is invalid in C99 [-Wimplicit-function-declaration] which eventually ends up with a linker error (From OE-Core rev: 6b603924e50a5694421b9142494315799422928d) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* busybox-inittab/sysvinit-inittab: add rconflictsChangqing Li2019-05-301-2/+1
| | | | | | | | | | | | | when both installed, do_rootfs report error like: file /etc/inittab conflicts between attempted installs of busybox-inittab-1.30.1-r0.qemux86 and sysvinit-inittab-2.88dsf-r10.qemux86 so add each other to rconflicts (From OE-Core rev: d66114b07ef3e8482fee4c3c93e4f6324c38da3b) Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit: consolidate patchesRoss Burton2019-03-294-0/+0
| | | | | | | (From OE-Core rev: b89a48da4bc25c769f8dbc15d5e8596258cda472) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit-inittab: support non-busybox-getty on serial consolesAndré Draszik2019-02-122-1/+14
| | | | | | | | | | | | | | | | | | | | | | | Busybox' getty has code to try to make itself a session leader, whereas util-linux' agetty doesn't. It expects this to happen from outside. When getty is not a session leader, many things don't work on the serial console, e.g. setting the terminal process group, job control doesn't work, etc. Executing image tests also fails with AssertionErrors, because Feb 5 16:12:55 qemuarm getty[590]: /dev/ttyAMA1: cannot get controlling tty: Operation not permitted Feb 5 16:12:55 qemuarm getty[590]: /dev/ttyAMA1: cannot set process group: Inappropriate ioctl for device Update the start_getty script to invoke getty via the setsid utility if needed, i.e. if /sbin/getty is not busybox getty. [YOCTO #13058] (From OE-Core rev: 37be77565d323fc543427ad47399996119f59ab1) Signed-off-by: André Draszik <andre.draszik@jci.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta: Use double colon for chown OWNER:GROUPKosta Zertsekel2018-11-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Rationale - excerp from `info chown` ==================================== OWNER‘:’GROUP If the OWNER is followed by a colon and a GROUP (a group name or numeric group ID), with no spaces between them, the group ownership of the files is changed as well (to GROUP). Some older scripts may still use ‘.’ in place of the ‘:’ separator. POSIX 1003.1-2001 (*note Standards conformance::) does not require support for that, but for backward compatibility GNU ‘chown’ supports ‘.’ so long as no ambiguity results. New scripts should avoid the use of ‘.’ because it is not portable, and because it has undesirable results if the entire OWNER‘.’GROUP happens to identify a user whose name contains ‘.’. (From OE-Core rev: 185918234a07cb506d7d7464a49ac33972c7d963) Signed-off-by: Kosta Zertsekel <zertsekel@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit: Fix build with glibc 2.28 + libxcryptKhem Raj2018-08-152-1/+73
| | | | | | | (From OE-Core rev: 87f2683ca19182dbffe48dc70a1f2628658fc08d) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit-inittab: do not use 'exit 1' to postpone to first bootAlexander Kanavin2018-05-151-6/+9
| | | | | | | | | | | | Instead, first check if we need to do anything at all during first boot, and if so, either postpone to first boot via pkg_postinst_ontarget() when running on host, or run the necessary setup code when running on target. (From OE-Core rev: 16df1717c3813ba773e0dfa2d1db471816d8b99b) Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit: inherit distro_features_checkRobert Yang2018-01-041-6/+3
| | | | | | | | | Use distro_features_check so that we can have a uniform controller. (From OE-Core rev: 658c59c90092f15c026fa3c72399f481c7241f65) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: don't use update-alternativesMarkus Lehtonen2017-12-021-1/+1
| | | | | | | | | | | | | Stop using update-alternatives for managing /etc/init.d/functions. Also, make the initscripts-functions subpackage to (runtime) conflict with lsbinitscripts. [YOCTO #10944] (From OE-Core rev: cdcebd81c872cb7386c658998e27cf24e1d0447c) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit-inittab: start_getty: Cleanup commentsAndrea Adami2017-09-211-13/+13
| | | | | | | | (From OE-Core rev: dd17a009e3adf2dc0d75a4c664086f661401e9ff) Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit-inittab: start_getty: consider whitespaces in tty driver nameAndrea Adami2017-09-211-4/+12
| | | | | | | | | | | | | Unbreak serial console when driver name contains spaces (PXA serial). Fix commit ac0e954 "start_getty: Over added SERIAL_CONSOLE cause error in userspace log" (From OE-Core rev: 8b98302c30efb7073f61dc2a166f7414f050ef65) Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* start_getty: Over added SERIAL_CONSOLE cause error in userspace logChoong YinThong2017-06-031-4/+34
| | | | | | | | | | | | | | | | | Error log will be logged into /var/log/message. Added in more condition checking on the script. Check /proc/tty/drivers and /proc/tty/driver/* file system to retrieve active targeted serial. Only establish getty with active serial in runtime. [YOCTO #10844] Reviewed-by: Saul Wold <sgw@linux.intel.com> (From OE-Core rev: ac0e9541fe93e866e42914f65a0516b993f0cffe) Signed-off-by: Choong YinThong <yin.thong.choong@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit-inittab: fix getty device removalLeonardo Sandoval2016-12-161-1/+1
| | | | | | | | | | | | | | | | getty devices were not being removed in some cases because device name was not at the end of the line, for example a ttyS1 device: S1:12345:respawn:/bin/start_getty 115200 ttyS1 vt102 Removing this limitation allows sed to remove any line containing the device. (From OE-Core rev: 2e0b36981c1f91ed0d3d457c370df10a099407af) Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit-inittab: make TERM=vt102 on serial consolesAndré Draszik2016-11-232-2/+2
| | | | | | | | | | | | | | | | This makes more sense than the default TERM=linux (as set by the linux kernel). In addition, when using busybox init, it tries to achieve the same (in a different way). Both agetty, and busybox getty support the terminal type as the last argument. (From OE-Core rev: a23004f32dda9310c7efc29720fa9c3027a7c329) Signed-off-by: André Draszik <adraszik@tycoint.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit-inittab_2.88dsf.bb: Allow aliasing with SERIAL_CONSOLES_CHECKCalifornia Sullivan2016-08-101-2/+5
| | | | | | | | | | | | | | | | | With some hardware the name of the device node and the name in /proc/console differ. This causes SERIAL_CONSOLES_CHECK to not enable working consoles in these cases. This patch changes SERIAL_CONSOLES_CHECK to have an optional alias for the checked consoles. The new format is: <device>:<alias to check(optional)> Fixes [YOCTO #9440]. (From OE-Core rev: 91d9f3271c12fb755ab332637b17650d5fe75ce2) Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit-inittab: restrict labels to 4 charsStephano Cetola2016-05-061-1/+2
| | | | | | | | | | | | | | The current recipe creates inittab labels based off the device node name of TTYs used as consoles. If those names exceed the 4 character label limit of inittab, it will break. This change takes the last 4 chars of the device names in order to avoid any errors. [ YOCTO #9529 ] (From OE-Core rev: 30acc7a6b9e6d1c42ba1df6e5a362d10b43cb4eb) Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit: make lastb.1 an alternativeDan McGregor2016-04-131-1/+2
| | | | | | | | | util-linux has an alternative for it. Add it to sysvinit too. (From OE-Core rev: 43069c2bd9947357970bd48504987bda514f5219) Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit: downgrade ALTERNATIVE_PRIORITY[mountpoint]Richard Tollerton2016-03-251-0/+2
| | | | | | | | | | | | | | sysvinit is objectively less maintained than util-linux or busybox, each of which may supply its own mountpoint implementation. Adjust the ALTERNATIVE_PRIORITY to select the sysvinit implementation as the last resort. (From OE-Core rev: 92c6b896e3b11283e2c313e6a2ac3497a99a13a0) Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit-inittab: Move start_getty scrip to base_bindir.Philip Tricca2016-02-281-4/+4
| | | | | | | | | | | | | | | When this file is in ${sysconfdir}/init.d, SELinux labels it as a generic init script (initrc_t). This causes problms at runtime because SELinux doesn't let the login process execute generic init script. Moving this helper script to base_bindir results in it being labeled as a generic binary (bin_t). Nearly every SELinux domain is allowed to execute generic binaries and the login process is one of them. (From OE-Core rev: 826bfea4b7018c7974ef388facc99ca70bb3654f) Signed-off-by: Philip Tricca <flihp@twobit.us> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit: Fix build with muslKhem Raj2015-12-122-0/+79
| | | | | | | | (From OE-Core rev: 8688f08e429dfbc758315f9f07933693269e7c5b) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit-inittab: Add wrapper script to verify console existsSaul Wold2015-12-012-4/+12
| | | | | | | | | | | | | | Add a wrapper script around getty to check if a given console exists, this allows for multiple Console ttys to be specified for various boards without having additional BSP types just for different console types. [YOCTO #8689] (From OE-Core rev: b93369a7943949f51057e0a704f5524ab7682fe6) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit: Fix makefile bug found with clangKhem Raj2015-08-302-0/+53
| | | | | | | | | | | | | | This is due to specifying .h files on linker cmdline clang driver is picky about it, and its not entirely correct either (From OE-Core rev: de45b5e68faeefe3d68818d456f280b98f397634) (From OE-Core rev: 44dcee60e343944199ee766ec0886931ff2b0699) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit-inittab: Run ttys on ttys that don't have tty in the nameRandy Witt2015-08-291-1/+2
| | | | | | | | | | | | | On qemuarm64 the second serial port in SERIAL_CONSOLES will be hvc0. Since that doesn't have tty in the name, a correct label didn't get added to inittab. This change makes both names with tty and without work. (From OE-Core rev: 4cca92b34defae425929d92671edde621f8a5e80) Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit: Only enable recipe in builds where its applicableRichard Purdie2015-06-101-0/+5
| | | | | | | | | | Similarly to systemd, only enable the recipe in builds where sysvinit is configured in DISTRO_FEATURES. This allows the new cleanup mechanism to handle it correctly in existing builds. (From OE-Core rev: 7f85e74d5c53b34e5f470967fdbdbd19fed1929a) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit: Add lastb to alternativesBryan Evenson2015-04-211-1/+1
| | | | | | | | | | | | | | SysVinit creates lastb as a symlink to last during the build. Just as other applications may provide last, other applications may provide lastb. Add alternatives designations for lastb to avoid installation conflicts with other applications. (From OE-Core rev: c76270e55cf6db6c757690f4b8df8c95924bdcd7) Signed-off-by: Bryan Evenson <bevenson@melinkcorp.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit-inittab: Fix no tty in runlevel 1.Aníbal Limón2015-03-221-1/+1
| | | | | | | | | | | | When switch to runlevel 1 (Single user mode), tty was not re-spawn and appears to be a machine hang. [YOCTO #5336] (From OE-Core rev: f7c270d073d6f0d1e741e9850c599074ebe79db7) Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta: set proper S valuePetter Mabäcker2015-01-231-1/+1
| | | | | | | | | | | | | | After removal of auto-creating S we must ensure that all recipes are using a proper value for S. Fix all recipes that only need to set S equals to WORKDIR. [YOCTO #5627] (From OE-Core rev: 9d220b1bfe4589736604dd5a7129e3699377d830) Signed-off-by: Petter Mabäcker <petter@technux.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit-inittab: Disable the carrier detect requirement for serial consolesOtavio Salvador2014-11-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | This aligns the params of getty with the ones used in Debian. From the getty(8) manpage: ,----[ getty(8) manpage ] | -L, --local-line | | Force the line to be a local line with no need for carrier | detect. This can be useful when you have a locally attached | terminal where the serial line does not set the carrier detect | signal. `---- Reported-by: Craig McQueen <craig.mcqueen@beamcommunications.com> (From OE-Core rev: a899c362be71cb7b94bd318c57702446b017005c) Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Tested-by: Craig McQueen <craig.mcqueen@beamcommunications.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit: allow stack size configuration from rcSScot Salmon2014-08-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | For certain swap/overcommit settings (e.g. when overcommit is disabled on a real-time system), we need to limit the stack size used by initscripts. When the STACK_SIZE environment variable is set (usually in /etc/default/rcS), ulimit the stack size to the value specified. Make the stack size ulimit a soft limit, which allows the user to increase the stack size where required without having to run the respective application as root. (From OE-Core rev: 0b5db16929de7668174e74e428f3e4e90e76e1d8) Signed-off-by: Scot Salmon <scot.salmon@ni.com> Signed-off-by: Gratian Crisan <gratian.crisan@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Acked-by: Rich Tollerton <rich.tollerton@ni.com> Acked-by: Brad Mouring <brad.mouring@ni.com> Acked-by: Bill Pittman <bill.pittman@ni.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit: bootlogd: ensure /var/log/boot is created in volatilesRichard Tollerton2014-07-232-1/+7
| | | | | | | | | | | | bootlogd does not write to /var/log/boot if it does not exist, so if using the volatiles facility (presumed to mount /var/log under a tmpfs), ensure that /var/log/boot gets created. (From OE-Core rev: 283d109098358c06ff10daaf612e5a244691d7ac) Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit: bootlogd: Don't run savelog if it's not installedRichard Tollerton2014-07-231-2/+2
| | | | | | | | | | | | | | | | bootlogd's default log rotation code on stop requires `savelog`, which is in debianutils, which may not be installed. If it's not installed, don't try to perform the log rotation. That is: in the affected code block, `savelog` is what is responsible for creating "boot.0". When `savelog` doesn't exist, an error message gets printed on bootup to the effect of "mv: can't find boot.0". (From OE-Core rev: 5c22973e1bf76615bcf57984ac7a30cf7d0766df) Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit: bootlogd: Honor VERBOSERichard Tollerton2014-07-231-4/+6
| | | | | | | | | | | | The messages echoed when starting and stopping bootlogd are currently printed regardless of the setting of VERBOSE. Adjust the initscript so they're only printed when VERBOSE is enabled. (From OE-Core rev: 42f107513148aa6e9fd69d51e63a183c613114c0) Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* mirrors.bbclass: Add mirror site for savannahChanghyeok Bae2014-05-111-1/+1
| | | | | | | | | | | | | | | | * The SRC_URI is not accessible. So need to add mirror site referred by the original site. * The problem is that http://download.savannah.gnu.org/releases redirects to closest mirror and few mirrors (e.g. .jp) weren't working correctly while http://download-mirror.savannah.gnu.org/releases/ seems to be reliable. * Add SAVANNAH_GNU_MIRROR and SAVANNAH_NONGNU_MIRROR variable in bitbake.conf. * Change the SRC_URI using the new variable. (From OE-Core rev: af00b6544f60e4d7581f9d9767f9d3f574392359) Signed-off-by: Changhyeok Bae <changhyeok.bae@lge.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit-inittab: avoid pipe with grepMatthieu Crapet2014-05-081-1/+1
| | | | | | | | | | | | | Replace: cat <file> | grep xxx By: grep xxx <file> (From OE-Core rev: 350c7c63c05a977158da91b4e06f84a6fb84a6ee) Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bumps to remove PRINC use in meta-fsl-ppcChunrong Guo2014-04-251-1/+1
| | | | | | | (From OE-Core rev: 1a91d791a903ab837a7695cfe47828618b8be6a6) Signed-off-by: Chunrong Guo <B40290@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* PR bumps to remove PRINC use in meta-openpliMike Looijmans2014-04-241-1/+1
| | | | | | | | | Resolves warnings of this kind in the OpenPLi layer: WARNING: Use of PRINC * was detected in the recipe * (From OE-Core rev: 5ffb38d6ace7faae839c8cac7327b5b1c2daae1a) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit: fix the bootlogd init script headerRoy Li2014-04-051-7/+11
| | | | | | | | | | fix the bootlogd init script header, to make chkconfig be able to work on bootlogd (From OE-Core rev: d1a7e5dbaa1217b692b46e2756c318e5aaa34f9d) Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* recipes: bump PRsMartin Jansa2014-03-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * resolves following warnings: WARNING: Use of PRINC 17 was detected in the recipe meta-openembedded/meta-systemd/recipes-core/systemd/systemd-machine-units_1.0.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-gpe/recipes-support/fbreader/fbreader_0.12.10.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-gpe/recipes-support/fbreader/fbreader_git.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-multimedia/recipes-multimedia/sox/sox_14.4.0.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-oe/recipes-multimedia/mplayer/mplayer-common.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe meta-smartphone/meta-android/recipes-bsp/chroot-script/chroot-script_1.0.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-connectivity/avahi/avahi-ui_0.6.31.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-connectivity/bind/bind_9.8.1.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-core/systemd/systemd-serialgetty.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-core/sysvinit/sysvinit-inittab_2.88dsf.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/screen/screen_4.0.3.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/shadow/shadow-securetty_4.1.4.3.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/shadow/shadow_4.1.4.3.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-graphics/libsdl/libsdl_1.2.15.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-graphics/packagegroups/packagegroup-core-x11-xserver.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-kernel/modutils-initscripts/modutils-initscripts.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-multimedia/libsndfile/libsndfile1_1.0.25.bb (or one of its .bbappends) WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-support/libcap/libcap_2.22.bb (or one of its .bbappends) WARNING: Use of PRINC 11 was detected in the recipe openembedded-core/meta/recipes-bsp/keymaps/keymaps_1.0.bb (or one of its .bbappends) WARNING: Use of PRINC 11 was detected in the recipe openembedded-core/meta/recipes-core/systemd/systemd-compat-units.bb (or one of its .bbappends) WARNING: Use of PRINC 12 was detected in the recipe openembedded-core/meta/recipes-core/initscripts/initscripts_1.0.bb (or one of its .bbappends) WARNING: Use of PRINC 13 was detected in the recipe openembedded-core/meta/recipes-core/base-files/base-files_3.0.14.bb (or one of its .bbappends) WARNING: Use of PRINC 2 was detected in the recipe meta-openembedded/meta-oe/recipes-navigation/navit/navit_svn.bb (or one of its .bbappends) WARNING: Use of PRINC 2 was detected in the recipe meta-openembedded/meta-oe/recipes-support/lvm2/lvm2_2.02.97.bb (or one of its .bbappends) WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-connectivity/portmap/portmap_6.0.bb (or one of its .bbappends) WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-extended/pam/libpam_1.1.6.bb (or one of its .bbappends) WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-graphics/packagegroups/packagegroup-core-x11.bb (or one of its .bbappends) WARNING: Use of PRINC 3 was detected in the recipe meta-openembedded/meta-efl/recipes-efl/efl/entrance_svn.bb (or one of its .bbappends) WARNING: Use of PRINC 3 was detected in the recipe meta-openembedded/meta-oe/recipes-multimedia/mplayer/mplayer2_git.bb (or one of its .bbappends) WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-bsp/formfactor/formfactor_0.0.bb (or one of its .bbappends) WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-connectivity/avahi/avahi_0.6.31.bb (or one of its .bbappends) WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-connectivity/dhcp/dhcp_4.2.5-P1.bb (or one of its .bbappends) WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-core/init-ifupdown/init-ifupdown_1.0.bb (or one of its .bbappends) WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb (or one of its .bbappends) WARNING: Use of PRINC 5 was detected in the recipe meta-openembedded/meta-oe/recipes-core/meta/distro-feed-configs.bb (or one of its .bbappends) WARNING: Use of PRINC 5 was detected in the recipe openembedded-core/meta/recipes-connectivity/bluez/bluez4_4.101.bb (or one of its .bbappends) WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-core/packagegroups/packagegroup-base.bb (or one of its .bbappends) WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-core/packagegroups/packagegroup-core-boot.bb (or one of its .bbappends) WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bb (or one of its .bbappends) WARNING: Use of PRINC 7 was detected in the recipe meta-openembedded/meta-oe/recipes-navigation/gpsd/gpsd_3.7.bb (or one of its .bbappends) WARNING: Use of PRINC 7 was detected in the recipe openembedded-core/meta/recipes-core/udev/udev-extraconf_1.0.bb (or one of its .bbappends) (From OE-Core rev: c6825ec6e92e20bb64a051d1576f363c16e98d68) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit: add initscripts-functions to RDEPENDSChen Qi2014-02-021-1/+1
| | | | | | | | | | | As sysvinit doesn't inherit update-rc.d, we need to add this dependency manually. (From OE-Core rev: 4ea9ca2bbacb20c3ed454b80e2c020c1073f3299) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Revert "Add missing RDEPENDS of initscripts-functions"Chen Qi2014-02-021-1/+1
| | | | | | | | | | | | | | | Instead of manually adding initscripts to RDEPENDS of each package, we should make it automatically handled by the update-rc.d.bbclass. This solution would have the benefit of backward compatibility. In other words, users need not modify their recipes. This reverts commit 16080a3485bd793edd66ed8361f1e8b86a9e19ea. (From OE-Core rev: f9f193219bd510160b6b09bae652a9dc8ea01e7b) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add missing RDEPENDS of initscripts-functionsChen Qi2014-01-061-1/+1
| | | | | | | | | | | Now that the initscripts-functions has been packaged separately, packages which may use the functions script should have a runtime dependency on it. (From OE-Core rev: 6690c12cb1977f6bf93f3eb6d471dbd7db81bf28) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Replace one-line DESCRIPTION with SUMMARYPaul Eggleton2014-01-022-2/+2
| | | | | | | | | | | | | | A lot of our recipes had short one-line DESCRIPTION values and no SUMMARY value set. In this case it's much better to just set SUMMARY since DESCRIPTION is defaulted from SUMMARY anyway and then the SUMMARY is at least useful. I also took the opportunity to fix up a lot of the new SUMMARY values, making them concisely explain the function of the recipe / package where possible. (From OE-Core rev: b8feee3cf21f70ba4ec3b822d2f596d4fc02a292) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sysvinit: use ALTERNATIVE to manage suloginChen Qi2013-11-201-1/+4
| | | | | | | | | | | Busybox also provides sulogin command, so we need to use the ALTERNATIVE mechanism to manage it. (From OE-Core rev: 8b3a799a87d18b1d113d59b3e7a681db5683e5f8) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-05-21 22:22:20 +0000