summaryrefslogtreecommitdiffstats
path: root/meta/recipes-core/meta/cve-update-db-native.bb
Commit message (Collapse)AuthorAgeFilesLines
* cve-check: Switch to NVD CVE JSON feed version 1.1Niko Mauno2019-12-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switch to recently released version 1.1 of NVD CVE JSON feed, as in https://nvd.nist.gov/General/News/JSON-1-1-Vulnerability-Feed-Release it is mentioned that Due to changes required to support CVSS v3.1 scoring, the JSON vulnerability feeds must be modified. This will require the consumers of this data to update their internal processes. We will be providing the JSON 1.1 schema on the data feeds page and the information below to prepare for this transition. ... The JSON 1.1 data feeds will be available on September 9th, 2019. At that time the current JSON 1.0 data feeds will no longer available. This change was tested briefly by issuing 'bitbake core-image-minimal' with 'cve-check.bbclass' inherited via local.conf, and then comparing the content between the resulting two 'DEPLOY_DIR_IMAGE/core-image-minimal-qemux86.cve' files, which did not seem to contain any other change, except total of 167 entries like CVSS v3 BASE SCORE: 0.0 were replaced with similar 'CVSS v3 BASE SCORE:' entries which had scores that were greater than '0.0' (up to '9.8'). (From OE-Core rev: cc20e4d8ff2f3aa52a2658404af9a0ff358cc323) (From OE-Core rev: c92b8804d6e59b2707332859957f0e6a46db0a73) Signed-off-by: Niko Mauno <niko.mauno@iki.fi> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cve-update-db-native: clean up proxy handlingRoss Burton2019-11-251-26/+5
| | | | | | | | | | | | | | urllib handles adding proxy handlers if the proxies are set in the environment, so call bb.utils.export_proxies() to do that and remove the manual setup. (From OE-Core rev: 6b73004668b3b71c9c38814b79fbb58c893ed434) (From OE-Core rev: 15f6b4b59805db40df4eff6d5a2809f6f05b66c1) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cve-update-db-native: add an index on the CVE ID columnRoss Burton2019-11-251-0/+3
| | | | | | | | | | | | | | Create an index on the PRODUCTS table which contains a row for each CPE, drastically increasing the performance of lookups for a specific CVE. (From OE-Core rev: b4048b05b3a00d85c40d09961f846eadcebd812e) (From OE-Core rev: 1b4a524da1532d15eb34a96c5bda5ff2af25a953) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cve-update-db-native: don't hardcode the database nameRoss Burton2019-11-251-2/+2
| | | | | | | | | | | | | | Don't hardcode the database filename, there's a variable for this in cve-check.bbclass. (From OE-Core rev: 0d188a9dc4ae64c64cd661e9d9c3841e86f226ab) (From OE-Core rev: 1c10a3189aad5109f04d1fc208d579225bdd1431) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cve-update-db-native: don't refresh more than once an hourRoss Burton2019-11-251-1/+9
| | | | | | | | | | | | | | | We already fetch the yearly CVE metadata and check that for updates before downloading the full data, but we can speed up CVE checking further by only checking the CVE metadata once an hour. (From OE-Core rev: 50d898fd360c58fe85460517d965f62b7654771a) (From OE-Core rev: f9e9107dbe23293eb96e049d7f821d2e33c23f06) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Anuj Mittal <anuj.mittal@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cve-update-db-native: fix https proxy issuesChin Huat Ang2019-07-261-11/+30
| | | | | | | | | | | | | | When https_proxy is set, use proxy opener to open CVE metadata and database URLs, otherwise fallback to the urllib.request.urlopen. Also fix a minor issue where the json database which has been gzip decompressed as byte object should be decoded as utf-8 string as expected by update_db. (From OE-Core rev: 95438d52b732bec217301fbfc2fb019bbc3707c8) Signed-off-by: Chin Huat Ang <chin.huat.ang@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cve-update-db-native: clean up JSON fetchingRoss Burton2019-07-221-17/+12
| | | | | | | | | | | | | Currently the code fetches the compressed JSON, writes it to a temporary file, uncompresses that with gzip and passes the fake file object to update_db(). Instead, uncompress the gzip'd data in memory and pass the JSON directly to update_db(). (From OE-Core rev: 9422745979256c442f533770203f62ec071c18fb) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cve-update-db-native: improve metadata parsingRoss Burton2019-07-221-8/+10
| | | | | | | | | | | | | | | | The metadata parser is fragile: first it coerces a bytes() to a str() (so the string is b'LastModifiedDate:2019...'), assumes the first line is the date, and then uses a regex to parse (which then includes the trailing quote as part of the date). Clean this up by parsing the bytes as UTF-8 (ASCII is probably fine, but this is safer), iterate through the lines and split on colons to find the right key/value pair. (From OE-Core rev: bb4e53af33d6ca1e9346464adbdc1b39c47530f3) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cve-update-db-native: use executemany() to optimise CPE insertionRoss Burton2019-07-221-53/+32
| | | | | | | | | | Instead of calling execute() repeatedly, rewrite the function to be a generator and use executemany() for performance. (From OE-Core rev: b309840b6aa3423b909a43499356e929c8761318) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cve-update-db: actually inherit nativeRoss Burton2019-07-191-2/+1
| | | | | | | | | The recipe was called -native but didn't inherit native. (From OE-Core rev: f0d822fad2a163d1ee32ed3b4c0359245140e19b) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cve-update-db-native: use os.path.join instead of +Ross Burton2019-07-191-4/+4
| | | | | | | (From OE-Core rev: 4b301030cf9cf7a981dcff85a50e915c045e3130) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cve-update-db-native: Remove hash column from database.Pierre Le Magourou2019-07-191-14/+7
| | | | | | | | | | | | djb2 hash algorithm was found to do collisions, so the database was sometime missing data. Remove this hash mechanism, clear and populate elements from scratch in PRODUCTS table if the current year needs an update. (From OE-Core rev: 78de2cb39d74b030cd4ec811bf6f9a6daa003d19) Signed-off-by: Pierre Le Magourou <pierre.lemagourou@softbankrobotics.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cve-update-db-native: use SQL placeholders instead of format stringsRoss Burton2019-07-181-1/+1
| | | | | | | (From OE-Core rev: 91770338f76ef35f3c4eeac216eb9d2b3188e575) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cve-update-db-native: Skip recipe when cve-check class is not loaded.Pierre Le Magourou2019-07-101-0/+5
| | | | | | | (From OE-Core rev: c807c2a6409e122599196cd914a638b00121cab6) Signed-off-by: Pierre Le Magourou <pierre.lemagourou@softbankrobotics.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cve-update-db: Use NVD CPE data to populate PRODUCTS tablePierre Le Magourou2019-07-091-14/+74
| | | | | | | | | | | | | Instead of using expanded list of affected versions that is not reliable, use the 'cpe_match' node in the 'configurations' json node. For cve-check to correctly match affected CVE, the sqlite database need to contain operator_start, operator_end and the corresponding versions fields. (From OE-Core rev: f7676e9a38d595564922e5f59acbc69c2109a78f) Signed-off-by: Pierre Le Magourou <pierre.lemagourou@softbankrobotics.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cve-check: Depends on cve-update-db-nativePierre Le Magourou2019-07-091-0/+143
do_populate_cve_db is a native task. (From OE-Core rev: 4078da92b49946848cddebe1735f301af161e162) Signed-off-by: Pierre Le Magourou <pierre.lemagourou@softbankrobotics.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-05-25 06:19:14 +0000