summaryrefslogtreecommitdiffstats
path: root/meta/recipes-core/initscripts
Commit message (Collapse)AuthorAgeFilesLines
* initscripts: Fix populate-volatile.sh bug when file/dir existsAndrei Gherzan2020-07-271-12/+12
| | | | | | | | | | | | | | | The blocks which test for entry exitence (file or directory) use a `A && B || C` syntax. This form is not behaving as a if-then-else block even the code logic assumes that. C may run when A is true which breaks the case where VERBOSE is 'no' but the file/directory exists. Along with fixing these specific issues, this patch fixes the other instances where blocks of form `A && B || C` are used as if-then-else. (From OE-Core rev: 1b9ea22acb66554925720e04cf24100664234574) Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: Fix various shellcheck warnings in populate-volatile.shAndrei Gherzan2020-07-271-29/+29
| | | | | | | (From OE-Core rev: 0a128a238f63d52aa82f8c63ee2f84ab528b3346) Signed-off-by: Andrei Gherzan <andrei@gherzan.ro> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* init-system-helpers: upgrade 1.57 -> 1.58Richard Purdie2020-07-181-1/+1
| | | | | | (From OE-Core rev: fd0cae10e4b769d80b036ed2325965bdd30d7e09) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: update postinstChangqing Li2020-06-301-1/+1
| | | | | | | | | | | | | | in container image, it don't have init system, install package initscripts will report error: systemctl: command not found fix by use same way as systemd.bbclass to decide if systemctl mask will run (From OE-Core rev: 790276bde066ecc9876120c3097dcd57a9936f00) Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* init-system-helpers: use https for fetchingAlexander Kanavin2020-06-091-1/+1
| | | | | | | | | git:// protocol seems to be down. (From OE-Core rev: 97da539d49de979c9a303a5ecda09515d188673e) Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* init-system-helpers: avoid superfluous update-rc.dJens Rehsack2020-06-041-7/+2
| | | | | | | | | | | | | Debians init-system-helpers bundle an own, perl written update-rc.d which doesn't fulfill embedded/cross-build requirements as our own in meta/recipes-core/update-rc.d does. To avoid unnecessary conflicts or questions, do not bundle it by default. Whoever wants it is invited to have an .bbappend. (From OE-Core rev: 4e5a55c7ecf7100bb87dcad31723ee27b7006ac2) Signed-off-by: Jens Rehsack <sno@netbsd.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts/init-system-helpers: fix mountnfs.sh dependencyJens Rehsack2020-06-042-0/+47
| | | | | | | | | | | | | | | | | | | | | | | | With commit c9fc9110be33fe0f24bc3a7c242b584a4ca33e04 Author: Yue Tao <Yue.Tao@windriver.com> Date: Fri May 25 10:48:08 2018 +0800 initscripts: Avoid starting rpcbind daemon twice Check the status before start it to avoid duplicates. the use of a script {/usr/sbin/}service is introduced - maybe earlier provided by systemd, nowadays mostly by init-system-helpers from debian project. For the very first shot, maybe discussions and improvements based on that script collection, use just the init-system-helpers-service in initscripts/mountnfs.sh to avoid problems mounting NFS in later boot stage. (From OE-Core rev: db690c3bf4664ce71fc21650fbcd8b6ac2eb71f1) Signed-off-by: Jens Rehsack <sno@netbsd.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts/sysfs.sh: Mount /sys/firmware/efi/efivars when possibleHaris Okanovic2019-11-101-0/+4
| | | | | | | | | | | | | Without this change, efibootmgr is unable to recover BootOrder if lost during a previous write operation, e.g. exceeded storage capacity. This is problematic using EFI to manage boot flow from Linux (E.g. via RAUC). https://www.kernel.org/doc/Documentation/filesystems/efivarfs.txt (From OE-Core rev: 0fb92b500b7d6b84368ca3a85e675400c6473987) Signed-off-by: Haris Okanovic <haris.okanovic@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: enable alignment.sh init script for big endian ARMAndre McCurdy2019-09-182-0/+1
| | | | | | | (From OE-Core rev: 2e00755bf231f1de5ab96ee5de0859cb0930d544) Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: remove warnings on read-only-rootfs (again)Martin Hundebøll2019-08-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the populate-volatile.sh initscript tests if a configured symlink is already in place, it uses readlink with the '-f' (follow) option: > [ "$(readlink -f $source)" = "$dest" ] If the test fails, it proceeds to delete the exisiting folder/file, and create the configured symlink. However, the '-f' option to readlink makes it follow symlinks pointing at symlinks. If the $dest argument is a symlink, the above test fails, and warnings are printed due to changing a read-only rootfs. This is the case for /tmp, and /etc/resolv.conf: > /tmp -> /var/tmp -> /var/volatile/tmp > /etc/resolv.conf -> /var/run/resolv.conf -> /run/resolv.conf Fix the warnings by removing the '-f' option, so that the test matches the configuration. [ YOCTO #10814 ] (From OE-Core rev: fb028a0a25c02ab56ad262afd8e6e9495a44673d) Signed-off-by: Martin Hundebøll <martin@geanix.com> Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: Add support for /etc/default/timestampJeroen Hofstee via Openembedded-core2019-03-042-3/+10
| | | | | | | | | | | Source /etc/default/timestamp if present. This allows the rootfs to be read-only / store the file in a persistant location if the whole rootfs is updated. (From OE-Core rev: b4de37b7176630d9585b12c50d537cd561c7aeb9) Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: Update volatiles documentation to include bindsJoshua Watt2019-02-191-1/+1
| | | | | | | | | | Volatiles processing now handles bind mounts, so update the comment in the core file to indicate this. (From OE-Core rev: 520e8f5721aab90815186533038c2f9f834546d5) Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta: Use double colon for chown OWNER:GROUPKosta Zertsekel2018-11-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Rationale - excerp from `info chown` ==================================== OWNER‘:’GROUP If the OWNER is followed by a colon and a GROUP (a group name or numeric group ID), with no spaces between them, the group ownership of the files is changed as well (to GROUP). Some older scripts may still use ‘.’ in place of the ‘:’ separator. POSIX 1003.1-2001 (*note Standards conformance::) does not require support for that, but for backward compatibility GNU ‘chown’ supports ‘.’ so long as no ambiguity results. New scripts should avoid the use of ‘.’ because it is not portable, and because it has undesirable results if the entire OWNER‘.’GROUP happens to identify a user whose name contains ‘.’. (From OE-Core rev: 185918234a07cb506d7d7464a49ac33972c7d963) Signed-off-by: Kosta Zertsekel <zertsekel@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: populate-volatiles: Speed up processingJoshua Watt2018-10-141-4/+33
| | | | | | | | | | | | | | | | | | | | | | | | Checking the requirements for each volatiles file in the populate-volatiles script can be very slow when there are a large number of volatiles files, easily consuming over 80% of the processing time. These checks don't usually uncover any problems so concatenate all the volatiles files together and process them as one large file for a "fast path" option. This ensures that the penalty for checking the requirements is only incurred once. In the event that checking the requirements for the unified file fails, fall back to the slow process of checking each one individually so that the offending one can be skipped. The core file is handled separately because it is responsible for creating the temp directory used by check_requirements and thus must always run first and without having its requirements checked. [YOCTO #12949] (From OE-Core rev: f380fac8a43a75861f3157777b12a317b985a5e1) Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: read-only-rootfs-hook: Use overlay if availableJoshua Watt2018-10-121-2/+7
| | | | | | | | | | | | Copying files from the read-only /var/lib to tmpfs can be slow and waste memory. If the kernel supports the overlay file system, use it to mount a writable tmpfs on top of the read-only /var/lib and avoid the file copy. (From OE-Core rev: 370fda1b2e8d5dc011522131bba4106de26bfb19) Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: Avoid starting rpcbind daemon twiceYue Tao2018-05-291-3/+6
| | | | | | | | | | | Check the status before start it to avoid duplicates. (From OE-Core rev: ca3ef7d1ef9b1f0dc4d3170b1ad20d5f725872a1) Signed-off-by: Yue Tao <Yue.Tao@windriver.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Jeff Polk <jeff.polk@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: rrecommend initscripts-functionsMarkus Lehtonen2017-12-021-0/+2
| | | | | | | | | | | In order to make that the default provider for initd-functions. [YOCTO #10944] (From OE-Core rev: d32eaebed5726c6157a2ac993baeb6d16683ade7) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: don't use update-alternativesMarkus Lehtonen2017-12-021-6/+3
| | | | | | | | | | | | | Stop using update-alternatives for managing /etc/init.d/functions. Also, make the initscripts-functions subpackage to (runtime) conflict with lsbinitscripts. [YOCTO #10944] (From OE-Core rev: cdcebd81c872cb7386c658998e27cf24e1d0447c) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: Add HOMEPAGE info into recipe file.Huang Qiyu2017-09-211-0/+1
| | | | | | | | (From OE-Core rev: 19f4e69c81653a4fa197fba2c46e48fcd554a12e) Signed-off-by: Huang Qiyu <huangqy.fnst@cn.fujitsu.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: split sushell into sub packageJackie Huang2017-08-231-2/+3
| | | | | | | | | | | | | | | | | | | * sushell is required by systemd service debug-shell when selinux is enabled, but it doesn't make sense to make systemd depend on initscripts, so split sushell into sub package initscripts-sushell. * The bash dependency has been removed by: ''' 4917e36a77bd6821b45db52caa43939d344d92f6 initscripts: Fix regression for requiring /bin/bash ''' so remove bash from RDEPENDS when selinux is enabled. (From OE-Core rev: 9c84ca86f396886ae68774032724b53664ecf0ed) Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: support persistent /var/logChen Qi2017-08-182-1/+3
| | | | | | | | | | | | Respect VOLATILE_VAR_LOG variable so that if it's set to any valid boolean false value, we could have persistent /var/log on the final image. [YOCTO #6132] (From OE-Core rev: 50914c4a84e0fb6b9bf6bb1864a2d653218753ce) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: start bootmisc.sh at 36 instead of 55David Vincent2017-07-211-1/+1
| | | | | | | | | | | | | | | | | | | | | bootmisc.sh is responsible for setting the system date to a sane default. Currently, it is the last script to be run from the rcS runlevel. Problem is that the files created before appear to have been created on 1/1/1970. Most notably, /var/log/dmesg created in dmesg.sh cannot be properly rotated with logrotate which does not consider it a valid date and stops processing. There is no blocker on moving this script right before populating volatiles because it just requires the local and virtual filesystems to be mounted to work. (From OE-Core rev: a0f6508847a28a78cb0a1e9613b6e5cc3047d995) Signed-off-by: David Vincent <freesilicon@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: Populate volatile from existing fileDavid Vincent2017-06-061-2/+14
| | | | | | | | | | | | | | | In some cases, it may be useful to populate a volatile file from an existing one, e.g. a file in a read-only rootfs that may be edited in a read-write destination. To provide this behavior, creation of volatile files has been updated to copy a file which has been given in the <linksource> field. If set to none, the current behavior is preserved. (From OE-Core rev: d44816bedadeef420226dc5efb67065cfcda6634) Signed-off-by: David Vincent <freesilicon@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts/sysfs.sh: mount configfs if presentMike Looijmans2017-03-011-0/+4
| | | | | | | | | | | | configfs is another kernel virtual file system that should be mounted if configured, so if it's configured into the kernel, mount it. It is used to configure e.g. USB gadget mode and devicetree overlays. (From OE-Core rev: 4f52130475d026c32f0380d301f56f6fa3df7ac9) Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: Add PACKAGE_WRITE_DEPS for postinstRichard Purdie2017-01-201-1/+1
| | | | | | | | The postinstall needs systemd-systemctl-native, mark the dependency (From OE-Core rev: 853f05b4d81c9af0fe1050cd15f13b8d3f9a93a9) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: populate-volatile: suppress read-only-rootfs warningsAndré Draszik2016-12-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | rm: can't remove '/etc/resolv.conf': Read-only file system ln: /etc/resolv.conf: File exists /etc/default/volatiles contains an entry: l root root 0644 /etc/resolv.conf /var/run/resolv.conf which causes populate-volatile.sh to execute the following in link_file(): if [ -L \"$2\" ]; then [ \"\$(readlink -f \"$2\")\" != \"\$(readlink -f \"$1\")\" ] && { rm -f \"$2\"; ln -sf \"$1\" \"$2\"; }; elif [ -d \"$2\" ]; then ... At the time the image is created, /etc/resolv.conf is already a symlink to /var/run/resolv.conf, but at boot time when populate-volatiles.sh is run, /var/run/resolv.conf doesn't exist, causing it to try to rm -f and ln -sf which of course fails due to the read-only filesystem. [YOCTO #10814] (From OE-Core rev: 765ee275f5499254b1f09e394c757072bea5f459) Signed-off-by: André Draszik <adraszik@tycoint.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: populate-volatile: don't run commands in backgroundMans Rullgard2016-12-221-3/+3
| | | | | | | | | | | If commands are run asynchronously they may be completed out of order causing problems if later entries depend on earlier ones. (From OE-Core rev: bead9e59768209dd70f9cba51d2f1e5925cc284d) Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: populate-volatile: improve config file parsingMans Rullgard2016-12-132-5/+7
| | | | | | | | | | | This improves the config file parsing to permit blank lines and comments following an entry or preceeded by whitespace. (From OE-Core rev: 415eaacb83b1c6df5210fb423e3e96e530b1dc42) Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: Start devpts at 06 instead of 38Mike Looijmans2016-09-031-1/+1
| | | | | | | | | | | | | | | | | | | For example bootlogd needs devpts to be running, but bootlogd starts at 07. Starting bootlogd early makes perfect sense, so the best option here is to move devpts up to 06 to prevent this error message at boot: cannot allocate pseudo tty: No such file or directory Systems that have CONFIG_LEGACY_PTYS in the kernel will not see this message. Since it is called "LEGACY" for a reason, fixing this in userspace appears to be the better option here. The devpts script does not need anything except a mounted "/dev" which has been arranged in "S02sysfs.sh" already. (From OE-Core rev: 4cb06256e0d13f3f5d0b280853b900d7d342b7f2) Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: Check for logrotate in dmesg.shOvidiu Vancea2016-08-231-2/+2
| | | | | | | | | | | | | Autodetect previously hardcoded logrotate location because it can be installed in multiple places like /usr/bin/logrotate which is very common besides /usr/sbin (From OE-Core rev: 277a5975d43125623b5a51ddcb48f9ee2474d0fc) Signed-off-by: Ovidiu Vancea <ovidiu.vancea@ni.com> Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: check if swapon/swapoff exists before executing themMing Liu2016-05-303-3/+3
| | | | | | | | | | | | | | | Not all built images contain swapon/swapoff, for instance, it is configurable with or without them in busybox. So it'd better to check if they exist or not before executing them. Redirecting the potential errors to /dev/null is not good enough, which might suppress the *real* errors. (From OE-Core rev: 2cb1142710cc2beb762c4c2b8edd44d3a97dafa0) Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: start urandom after populate-volatilesJens Rehsack2016-02-141-1/+1
| | | | | | | | | | In case of read-only rootfs, populoate-volatiles might be used to create some links (or bind-mounts) required for having a writable /var/lib. (From OE-Core rev: 1f07dcfcecbd42f947b83c6f75d1a66186bcad68) Signed-off-by: Jens Rehsack <sno@netbsd.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: populate-volatiles.sh: add mount-bind featureJens Rehsack2016-02-141-0/+10
| | | | | | | | | | | | | | | | Add ability to run "mount --bind" to populate-volatiles. Since several programs use realpath to determine several full qualified file names, there is no symlink to be resolved. So when speccing /run/lock - that's the location - not /var/run/lock because of the program is smarter than the operator/distributor. See https://github.com/rehsack/meta-jens/blob/jethro/recipes-core/initscripts/initscripts/volatiles for an example how to use the "b" feature. (From OE-Core rev: ab42fcaf1427a29c31ac2e93965e20849b1b1234) Signed-off-by: Jens Rehsack <sno@netbsd.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: hide the error in case system is not writeableMing Liu2015-12-011-1/+1
| | | | | | | | | | | | To avoid reporting errors for /etc/timestamp is not writeable in a readonly system. Reported-by: Niklas Soderlund <niklas.soderlund@external.atlascopco.com> (From OE-Core rev: 463bef8b055f8305b7aac5045fefe4276b1432ad) Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts/sysfs.sh: Mount devtmpfs on /dev/ if neededMike Looijmans2015-10-271-0/+4
| | | | | | | | | | | | | | | | | | When booting from an initrd disk, or when the kernel config option DEVTMPFS_MOUNT isn't provided, /dev/ will not be mounted at boot. This small addition will check if /dev/ is "useful", and if not, will mount devtmpfs if the kernel provides it. With this change, it is possible to set an initscripts style image type to "cpio.gz" and boot it as initrd. Without this change, the image won't work properly because of the missing devices. (From OE-Core rev: a1cfb8a2691ed36700c96cbc1a0e744494294d2b) Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: Fix regression for requiring /bin/bashJason Wessel2015-08-101-2/+2
| | | | | | | | | | | | | | | | | | | It is not possible to create a rootfs with only busybox + initscipts. This is a result of a regression from commit a4b53872a8a9a2743299acbff015f7f2750a69d6 (initscripts: add /sbin/sushell for systemd service debug-shell). The /sbin/sushell should just use /bin/sh else you end up with a problem when creating the end image with a failed smart transaction shown below: ERROR: Unable to install packages. Command '/proj/bitbake_build/tmp/sysroots/x86_64-linux/usr/bin/smart --quiet --data-dir=/proj/bitbake_build/tmp/work/qemuarma9-wrs-linux-gnueabi/wrlinux-image-glibc-small/1.0-r1/rootfs/var/lib/smart install -y dropbear@armv7at2_vfp hac@armv7at2_vfp run-postinsts@all kernel-modules@qemuarma9 packagegroup-core-boot@qemuarma9' returned 1: error: Can't install initscripts-1.0-r155.0@armv7at2_vfp: no package provides /bin/bash (From OE-Core rev: 4917e36a77bd6821b45db52caa43939d344d92f6) Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: urandom: respect ${localstatedir} instead of hardcoding /varAndré Draszik2015-07-311-1/+2
| | | | | | | (From OE-Core rev: 5f3f4196988675e9be5aea8eac56687641b90c10) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: add /sbin/sushell for systemd service debug-shellKai Kang2015-07-092-1/+14
| | | | | | | | | | | | | | | | | Add file /sbin/sushell for systemd service debug-shell which starts with /bin/sushell when SELinux is enabled. Copy and add sushell file from Fedora 22. Add runtime dependency bash as well when systemd is enabled to eliminate QA warning: WARNING: QA Issue: /sbin/sushell_initscripts contained in package initscripts requires /bin/bash, but no providers found in its RDEPENDS [file-rdeps] (From OE-Core rev: a4b53872a8a9a2743299acbff015f7f2750a69d6) Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: Remove /etc/volatile.cache on upgradeBryan Evenson2015-04-201-0/+5
| | | | | | | | | | | | | | | | | /etc/volatile.cache is a cached copy of a script (which is generated by /etc/init.d/populate-volatile.sh) that generates the volatile filesystem directories. Since volatile.cache is a generated file, it is not necessarily changed if populate-volatile.sh is updated. As a result, the stale script can add/remove the wrong directories on the next system boot. If initscripts is being upgraded, make sure volatile.cache gets deleted. (From OE-Core rev: 317269b4a5c698e30b87bd597b436283512cbde9) Signed-off-by: Bryan Evenson <bevenson@melinkcorp.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta: set proper S valuePetter Mabäcker2015-01-231-0/+2
| | | | | | | | | | | | | | After removal of auto-creating S we must ensure that all recipes are using a proper value for S. Fix all recipes that only need to set S equals to WORKDIR. [YOCTO #5627] (From OE-Core rev: 9d220b1bfe4589736604dd5a7129e3699377d830) Signed-off-by: Petter Mabäcker <petter@technux.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: avoid overwritting editable files during package updatingJian Liu2014-12-031-0/+2
| | | | | | | | | | | | | | | Use CONFFILES to mark editable files as such, /etc/init.d/checkroot.sh If there is no %config micro before the file name in the spec file, this file will be overwritten after updating package. This will make our settings lost. (From OE-Core rev: a265af666a80298ccca0eb80d6f15ca3d4be8b57) Signed-off-by: Jian Liu <jian.liu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: mask several init scriptsChen Qi2014-09-031-0/+4
| | | | | | | | | | | We now support executing scripts under /etc/rcS.d. So we need to mask several more init scripts here to prevent them from running at boot time. (From OE-Core rev: c8f9527f18e5dd813c0330ba409875d34c36f6ab) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: fix bashism in bootmisc.shBen Shelton2014-07-231-1/+5
| | | | | | | | | | | | | | | | | | | | In the commit 'initscripts: save /etc/timestamp with seconds accuracy', a bashism was introduced in the bootmisc.sh script in the code to set the current date from the stored value in /etc/timestamp. This causes that operation to fail with the following message when /bin/sh is not bash: /etc/init.d/rc: /etc/rcS.d/S55bootmisc.sh: line 73: syntax error: bad substitution Fixed by using pattern matching removal rather than bash-specific substring expansion. [YOCTO #6566] (From OE-Core rev: c8a451adc71e4ce9ab963f61d7830c2d75aaffca) Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: Add support for /etc/default/urandomRichard Tollerton2014-07-191-0/+1
| | | | | | | | | | | | Source /etc/default/urandom if present. This allows the rootfs to remain read-only while enabling the user to override the location of the random seed file. (From OE-Core rev: 415e1a4ac8120b28118671698459b098c965a4f6) Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: make hostname.sh coreutils-compatibleRichard Tollerton2014-07-191-1/+1
| | | | | | | | | | | inetutils and busybox hostname utils support `hostname -F`; coreutils hostname doesn't. So just use `cat` instead. (From OE-Core rev: acb8674e498468088d867ffae9a458caa08d95d5) Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: Use current date as an additional source of entropyKen Sharp2014-07-191-6/+5
| | | | | | | | | | | If the seed file is empty or does not exist, the date is an extremely poor backup source of entropy, but it is better than nothing. (From OE-Core rev: 0a41a7c20316c7d3330233a624d8cf20ea5a81ae) Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: parametrize random seed file locationRichard Tollerton2014-07-191-5/+8
| | | | | | | | | | | | Currently, the random seed file location is hardcoded to /var/lib/urandom/random-seed. Refactor it to a parameter (RANDOM_SEED_FILE) so the file location is defined in only one place. (From OE-Core rev: 558ba23cfdd60bf64b9214460a2772be70079796) Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: save /etc/timestamp with seconds accuracyBlair Elliott2014-07-192-3/+4
| | | | | | | | | | | | Currently, /etc/timestamp is saved with minutes accuracy. To increase the accuracy, modify the save-rtc.sh and bootmisc.sh scripts to save and read /etc/timestamp respectively with seconds accuracy. (From OE-Core rev: 8fed53e4e72230c61f23cb36eda36c228aede1e0) Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: bootmisc.sh: Make sysctl -p honor VERBOSERichard Tollerton2014-07-191-1/+6
| | | | | | | | | | busybox sysctl may lack the "-q" setting, so simulate it with redirects. (From OE-Core rev: 5672b5188557b940340bdc3e6a3ac30835b829fb) Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* initscripts: update populate-volatile.shKai Kang2014-06-241-4/+6
| | | | | | | | | | | | | | | | | | If a partition such as /tmp mounted on a volatile directory which create by script populate-volatile.sh from initscripts, it will show errors. In /var/log/boot, error message: Thu Jun 19 05:39:09 2014: bootlogd. Thu Jun 19 05:39:10 2014: rm: cannot remove '/tmp': Device or resource busy Check volatile directories and if it is be mounted then don't force make it as a link. (From OE-Core rev: cc4b0936c7a6a1563dc88d62d8c9020791eaa446) Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-11 16:40:45 +0000