summaryrefslogtreecommitdiffstats
path: root/meta/recipes-connectivity
Commit message (Collapse)AuthorAgeFilesLines
* openssh: fix using the original config files in srcdirZheng Junling2014-12-051-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | Currently, we install our own ssh_config and sshd_config into ${S} in do_compile_append() task. So when finishing compiling, their .out files are generated by the original files, rather than by our own files. In most cases, installing "$(CONFIGFILES)" in Makefile will generate .out files again, and then installing "install-sysconf", which will install these two files into $(DESTDIR), thus we get what we expect. However, when parallel installing, "install-sysconf" may be installed before "$(CONFIGFILES)" sometimes. In this rare case, the .out files generated in the first time rather than those in the second time will be installed into $(DESTDIR), and thus we get an unexpect result. This patch fixes this bug through transfering the installing of our own files from do_compile_append() into do_configure_prepend(). (From OE-Core rev: 6a60a4ba8d8e529882daa33140c9a2fc08714fb2) Signed-off-by: Zheng Junling <zhengjunling@huawei.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* resolvconf: add fixes for busybox and make it workSaul Wold2014-12-033-3/+38
| | | | | | | | | | | | | | | | | | resolvconf was missing a script and needed readlink which was in /usr/bin. Also the /etc/resolv.conf was not being correctly linked to /etc/resolvconf/run/resolv.conf, which is fixed by the volaties change which is now a file as opposed to created in do_install. Ensure that the correct scripts for ifup/ifdown get installed and that resolvconf is correctly enabled at startup [YOCTO #5361] (From OE-Core rev: 853e8d2c7aff6dddc1d555af22f54c4ecef13df1) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* connman-gnome: fix dbus interface nameChong Lu2014-12-032-3/+191
| | | | | | | | | | | This patch resolves following error: "connman-dbus.xml": "connman" is not a valid D-Bus interface name (From OE-Core rev: 964bcac02bb182340e44dc8a07b5d308f0a4a719) Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bind: clean host path in isc-config.shShiqun Lin2014-11-251-0/+7
| | | | | | | | | | | * /usr/bin/isc-config.sh * /usr/bin/bind9-config - hardlink to isc-config.sh (From OE-Core rev: c2332d304a2c872e97653c980b090efa2181123b) Signed-off-by: Shiqun Lin <Shiqun.Lin@windriver.com> Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* nfs-utils: Upgrade to 1.3.1Alejandro Hernandez2014-11-255-142/+2
| | | | | | | | | | | | | | | Removed: fix-a-Gcc-undefined-behavior.patch - Upstream Removed: 0001-statd-fixed-the-with-statdpath-flag.patch - Upstream Removed: fix-the-start-statd.patch - Different solution on upstream Removed: nfs-utils-1.0.6-uclibc.patch - Different solution on upstream (From OE-Core rev: 7cd8b38f4f53d25a6dec8ec3b130a345480ff6b7) Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* iproute2: upgrade to 3.17.0Cristian Iorga2014-11-252-38/+2
| | | | | | | | | | 0001-ip-link-Remove-unnecessary-device-checking.patch removed, included upstream. (From OE-Core rev: ca8d593ca2683f73cdbfcbd14ee7ee1549e2f2bd) Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libpcap: upgrade to 1.6.2Cristian Iorga2014-11-251-2/+2
| | | | | | | | | - Bug fixes. (From OE-Core rev: e9d5ac91207ee2bc3ce99c16a2b41134eb709139) Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* openssh: drop already applied patchPaul Eggleton2014-11-202-23/+0
| | | | | | | | | This patch was part of the 6.6p1 release. (From OE-Core rev: 45206510ab48bfee6e183f698f963fea8f03e2a5) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bind: use PACKAGE_BEFORE_PN instead of PACKAGES_prependRoss Burton2014-11-201-1/+1
| | | | | | | | | | Appending or prepending to PACKAGES breaks when the package is built natively, so use PACKAGE_BEFORE_PN instead. (From OE-Core rev: 23d7223a21582edefc4e30d76f94f8e81a543af9) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bluez5: fix QA error from configure optionPeter A. Bigot2014-11-201-1/+1
| | | | | | | | | | | | The systemdunitdir option was split into systemdsystemunitdir and systemduserunitdir before bluez5 was ever released, so this produced a QA error and was ignored. There appears to be no reason to override the inferred default, so replace it with an explicit --enable-systemd. (From OE-Core rev: 8c9c08112d7b3bde48fb4dd5e15429948aca0dd6) Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bluez5: upgrade to 5.25Cristian Iorga2014-11-202-3/+4
| | | | | | | | | | | | - Cleanups and minor fixes; - Phonebook Access Profile 1.2 and Message Access Profile 1.2 features and improvements; - Various GATT related fixes; - Fix for a race condition which could occasionally cause LE connection/pairing failures. (From OE-Core rev: 3b387c7c76d52373acae3bad96a8d718ab1948bd) Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* wpa-supplicant: upgrade to 2.3Cristian Iorga2014-11-203-9/+9
| | | | | | | | | | - P2P WiFi improvements; - Bug fixes. (From OE-Core rev: f600e77bbdc1d6a0f29bf8bd775b79dc01bc0b4d) Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* nfs-utils: change owner/group of directories in do_installChen Qi2014-11-092-29/+5
| | | | | | | | | | | | | | | | | | | Previously, the owners/groups of directories like /var/lib/nfs/statd are changed in the init script, /etc/init.d/nfscommon. This is actually a workaround. We need to change them at do_install time. This patch fixes the above problem by changing owners/groups at do_install time. Besides, configuration option '--with-staduser=nobody' is changed to be '--with-statduser=rpcuser'. And /var/lib/nfs/statd/state is modified to have permission 0644, just like other distros (ubuntu, fedora, etc.) do. (From OE-Core rev: 8c27a1e25ae42a435ab7d290cab40f94f9286243) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* resolvconf: Upgrade to 1.76Saul Wold2014-11-091-2/+2
| | | | | | | (From OE-Core rev: 8768b0f66a0419b6bf94010bc6458e9f0b528891) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gst-plugin-bluetooth: remove systemd service fileChong Lu2014-11-061-0/+1
| | | | | | | | | | | | | | | | | | The service file should be included in bluez4 package, not in plugin package. This solves the following warning: WARNING: QA Issue: gst-plugin-bluetooth: Files/directories were installed but not shipped /lib /lib/systemd /lib/systemd/system /lib/systemd/system/bluetooth.service [installed-vs-shipped] (From OE-Core rev: e1767c2f39e690c40c5d53d3b6d9e9706ceb10cd) Signed-off-by: Chong Lu <Chong.Lu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* connman: upgrade to 1.26Cristian Iorga2014-11-061-2/+2
| | | | | | | | | | | | - WiFi P2P support in ConnMan has been significantly improved; - Applications can now register WiFi Display, UPnP or Bonjour P2P services; - Various bug fixes. (From OE-Core rev: 3aad6d51a303d0330205eebfeac58c2ccb612e77) Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* iproute2: backport a patch to make adding vxlan link successRoy.Li2014-11-042-0/+36
| | | | | | | | | | | | | | | | | | | If without this patch: $ ip link add vxlan0 type vxlan id 51 group 238.1.1.1 dev eth0 Error: argument "vxlan0" is wrong: Unknown device $ With this patch; $ ip link add vxlan0 type vxlan id 51 group 238.1.1.1 dev eth0 $ ifconfig -a |grep vxlan0 vxlan0 Link encap:Ethernet HWaddr da:61:56:2e:c2:20 $ (From OE-Core rev: 4f2873c8567738310f7e86c633c6da759554b21a) Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bind: fix to use correct environment file in service fileChen Qi2014-11-041-1/+1
| | | | | | | | | | Use /etc/default/bind9 as the environment file in named.service. (From OE-Core rev: 0ee1fa68a4d749585c43fc706c8da6e849d10857) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* wpa_supplicant: Improve rebuild handlingRichard Purdie2014-10-301-0/+1
| | | | | | | | | | Due to the split level nature of the wpa_suppliant sources, the standard clean methods don't work. This change ensures it picks up on changes to configuration. (From OE-Core rev: 9183ce719463b20350d2a3de5ead64b0cc642d6e) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* nfs-utils: fix start-statdRoy.Li2014-10-242-0/+31
| | | | | | | | | | | | 1. add /bin to PATH of start-statd, otherwise systemctl can not be found. 2. drop error when systemd fails to start statd.service; since if it failed, rpc.statd will be called directly. (From OE-Core rev: 048130996300e1762bc6d714ba09aac5a326843d) Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* nfs-utils: fix a Gcc undefined behaviorRoy Li2014-10-242-0/+39
| | | | | | | | | | | | | | Calling strncpy with NULL second argument, even when the size is 0, is undefined behavior, which leads to GCC to drop the check old variable with NULL in following code. https://bugzilla.yoctoproject.org/show_bug.cgi?id=6743 (From OE-Core rev: af56e7559d31cb9cb84b85a7dedd8e12cf1f06cd) Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* openssl: upgrade to 1.0.1jRoss Burton2014-10-181-2/+2
| | | | | | | (From OE-Core rev: 390916b8400a46088c71183aef6e17b947cf4b74) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* openssh: avoid screen sessions being killed on disconnect with systemdPaul Eggleton2014-10-181-0/+1
| | | | | | | | | | | | | | | Tell systemd just to kill the sshd process when the ssh connection drops instead of the entire cgroup for sshd, so that any screen sessions (and more to the point, processes within them) do not get killed. (This is what the Fedora sshd service file does, and what we're already doing in the dropbear service file). (From OE-Core rev: 3c238dff41fbd3687457989c7b17d22b2cc844be) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* wpa-supplicant: fix for rebuildRobert Yang2014-10-101-0/+2
| | | | | | | | | | | | | Fixed when rebuild: make: *** No rule to make target `/path/to/old//sysroots/qemux86-64/usr/lib/dbus-1.0/include/dbus/dbus-arch-deps.h', needed by `dbus/dbus_old.o'. Stop. The .d files save the path of the dependencies files which may not exist when rebuild, we can remove them to make the rebuild work. (From OE-Core rev: e336102e59dbbd01fe67121738203563476f9456) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* avahi-ui: fix for building systemd with multilibRobert Yang2014-10-101-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed: MACHINE = "qemux86-64" VIRTUAL-RUNTIME_init_manager = " systemd " DISTRO_FEATURES_append = " systemd" DISTRO_FEATURES_BACKFILL_CONSIDERED += " sysvinit " require conf/multilib.conf MULTILIBS = "multilib:lib32" DEFAULTTUNE_virtclass-multilib-lib32 = "x86" $ bitbake avahi avahi-ui ERROR: QA Issue: avahi-ui: Files/directories were installed but not shipped /lib /lib/systemd /lib/systemd/system /lib/systemd/system/avahi-daemon.socket /lib/systemd/system/avahi-dnsconfd.service /lib/systemd/system/avahi-daemon.service [installed-vs-shipped] ERROR: The recipe avahi-ui is trying to install files into a sharedarea when those files already exist. Those files and their manifestlocation are: /path/to/sysroots/qemux86-64/lib/systemd/system/avahi-daemon.socket Matched in manifest-qemux86-64-avahi.populate_sysroot /path/to/sysroots/qemux86-64/lib/systemd/system/avahi-dnsconfd.service Matched in manifest-qemux86-64-avahi.populate_sysroot /path/to/sysroots/qemux86-64/lib/systemd/system/avahi-daemon.service Matched in manifest-qemux86-64-avahi.populate_sysroot Please verify which recipe should provide theabove files. And remove the duplicated line: rm ${D}${base_libdir} -rf (From OE-Core rev: 1e6ec39d4996d2812b01c4452c579e476e70e85d) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* neard: update service fileRoss Burton2014-10-101-3/+3
| | | | | | | | | | | | | | | Update the service file to more closely match the service file that has been committed upstream. In particular we don't want to restart neard on failure (this results in it restarting repeatedly if no NFC hardware is found), redirecting stdout to /dev/null means that any messages are lost instead of being sent to the journal, and the DBus alias is required for bus activation to work correctly. (From OE-Core rev: b6afd8e5abcd412c17e14c59379b9583b95fd517) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* dhcp: use ${PN} for SYSTEMD_SERVICESChen Qi2014-09-291-5/+5
| | | | | | | | | | | | We should use ${PN} instead of hardcoding 'dhcp' for SYSTEMD_SERVICES, otherwise we would have 'installed-not-shipped' QA error if we are building lib32-dhcp. (From OE-Core rev: c3a152f946f7cb1666384fd7a214f883cbaecb56) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* irda-utils: remove inherit autotoolsRoss Burton2014-09-231-1/+1
| | | | | | | | | irda-utils doesn't use autotools, so don't inherit it. (From OE-Core rev: d5e2a59ab59e3d67d09c5f25b8623186af855e17) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* irda-utils: obey LDFLAGSChristopher Larson2014-09-222-5/+88
| | | | | | | | | | While we're at it, also switch to explicit variable passing rather than relying on make -e, and pass V=1 so the actual commands hit the logs. (From OE-Core rev: 7106f840b7d2a71171131c3c3e5fc311718ca718) Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* portmap: add systemd service fileChen Qi2014-09-163-2/+20
| | | | | | | | | | Add systemd service file for systemd support. (From OE-Core rev: cc44cb2888f1ddecdd01d7bc414f7ac3043d1372) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* portmap: fix INITSCRIPT_PARAMSChen Qi2014-09-161-1/+1
| | | | | | | | | | Fix portmap init to make it run at runlevel 2,3,4,5. (From OE-Core rev: 93845fe60d89c0592a5c1ed631fc737c724cbc5b) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bluez5: Allow method calls over dbus for bluetooth daemonYasir-Khan2014-09-101-0/+1
| | | | | | | | | | | | | | | | This patch changes the dbus policy settings in order to allow calling methods over dbus. bluez5 and pulseaudio rely on this mechanism to configure media end points. Previously bluetoothd was failing to configure the media end points with error org.freedesktop.DBus.Error.AccessDenied, due to which bluetooth headset and smartphone were unable to connect in A2DP mode. (From OE-Core rev: eb3a380301b8f7ec34d3649c386214d39355eaa0) Signed-off-by: Yasir-Khan <yasir_khan@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* dhcp: add systemd service filesChen Qi2014-09-033-4/+39
| | | | | | | | | Add dhcpd.service and dhcrelay.service to support systemd systems. (From OE-Core rev: 5f40081b0b9867bc167057712b04b3c1afb8a20d) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libpcap: upgrade to 1.6.1Cristian Iorga2014-08-313-31/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | - Still BSD licensed, some changes into pcap triggered a checksum change; - ieee80215-arphrd.patch removed, obsolete. - switched to ${BP} variable; Changelog from previous version: Saturday Jul. 19, 2014 mcr@sandelman.ca Summary for 1.6.1 libpcap release some fixes for the any device changes for how --enable-XXX works Wednesday Jul. 2, 2014 mcr@sandelman.ca Summary for 1.6.0 libpcap release Don't support D-Bus sniffing on OS X fixes for byte order issues with NFLOG captures Handle using cooked mode for DLT_NETLINK in activate_new(). on platforms where you can not capture on down interfaces, do not list them but: do list interfaces which are down, if you can capture on them! (From OE-Core rev: ff962963de4dea9143f11ded480d0cca79a66d99) Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* iproute2: upgrade to 3.16.0Cristian Iorga2014-08-311-2/+2
| | | | | | | | | Bugfixes. (From OE-Core rev: 0e56f9277da053b702cc7ce709988dfd54f1f09f) Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* ofono: upgrade to 1.15Cristian Iorga2014-08-283-13/+1282
| | | | | | | | | | | | | - Bug fixes; Add support for Handsfree subscriber number feature; Add support for Handsfree multiple DTMF characters; Add support for PAP authentication. - Added patch to revert tests to work with Python2.x. (From OE-Core rev: 21f95b2db0f22dcb4d9cd59a90f291f72982f2a1) Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bluez5: upgrade to 5.22Cristian Iorga2014-08-282-3/+3
| | | | | | | | | | | | Several fixes to HID over GATT (HoG) and for AVRCP. Notable additions with the Linux kernel 3.17: - BR/EDR whitelist support; - Proper LE passive scanning support. (From OE-Core rev: 4284b449a9a7a08935f99fecdd1de7c481d4a9b7) Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* connman: upgrade to 1.25Cristian Iorga2014-08-282-35/+2
| | | | | | | | | | | | | | | | | | build-libppp-plugin-without-versioning-info.patch no longer needed, removed. Changelog: Fix issue with handling rebind timer for DHCPv6. Fix issue with handling DHCP renew transaction. Fix issue with user supplied proxy settings and DHCP. Fix issue with extra status codes from captive portals. Fix issue with service idle state reset on failure. Fix issue with DNS label compression handling. Add support for experimental P2P Peer service. (From OE-Core rev: f53c5e7914ea37338817fcb7efbd42414045e07c) Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* openssl: Re-add linux-uclibc tupleKhem Raj2014-08-271-0/+1
| | | | | | | | | | | With last restructuring for musl, some of uclibc targets got ignored fsl/ppc and ARM worked ok since they use special target triplets which were already considered but other like mips, x86 and so on failed (From OE-Core rev: 63ab0ce2103bcf3a42ce5812a22409779126e114) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bind: refer ubuntu/redhat to add bind user/groupHongxu Jia2014-08-232-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | We refer what ubuntu/redhat did, gave bind a user/group Here is the example in ubuntu 14.04: $ ps -eo user,group,cmd | grep "named" ... bind bind /usr/sbin/named -u bind ... $vim bind9_1%3a9.9.5.dfsg-3_amd64.deb/postinst ... # lets give them a bind user/group in all cases. getent group bind >/dev/null 2>&1 || addgroup --system bind getent passwd bind >/dev/null 2>&1 || adduser --system --home /var/cache/bind --no-create-home \ --disabled-password --ingroup bind bind ... (From OE-Core rev: e37841faf746895f41627130623196c0bebe0740) Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* openssl: add DEPENDS on openssl-native for rehashJackie Huang2014-08-231-0/+5
| | | | | | | | | | | | | | | | | 'make rehash' used the compiled openssl to get hash value for files, it always failed when cross compiling: /path/to/openssl/1.0.1i-r0/openssl-1.0.1i/util/shlib_wrap.sh: line 96: /path/to/openssl/1.0.1i-r0/openssl-1.0.1i/util/../apps/openssl: cannot execute binary file so add DEPENDS on openssl-native for target package and use it instead of the one compiled from target package. (From OE-Core rev: 9705586b6eca157e8f8fd6071f489a49bf1db181) Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* dhcp: do not use ifconfig/route in dhclient-scriptFahad Usman2014-08-232-0/+177
| | | | | | | | | | | | | | | | | | | | | | | | | The original patch was submitted on ISC's mailing list but it didn't get merged for some reason, it can be found here; https://lists.isc.org/pipermail/dhcp-users/2011-January/012910.html "The ISC DHCP's dhclient-script for Linux still uses the legacy commands 'ifconfig' & 'route' to manage IPv4 network addresses & routes, while it uses iproute2's new "ip" command to manage IPv6 network data. This requires users & distributions to have both types of commands installed The attached patch tries to improve the situation by replacing the old "ifconfig" resp. "route" commands with their "ip" counterparts. It even improves the logic a bit by only flushing the IPv4 addresses instead of taking down the whole interface, which may still have active IPv6 connections." (From OE-Core rev: afcaccd283e590294335f38d86635cf99db39e3f) Signed-off-by: Fahad Usman <fahad.usman@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* avahi: Since ${PN} is empty, set -dev RDEPENDSRichard Purdie2014-08-161-0/+2
| | | | | | | | Since ${PN} is empty, we need to specify the ${PN}-dev RDEPENDS. (From OE-Core rev: cc8e2137f82289a580a7fd58114e0a9e51b6d61a) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* openssl: Repace if-else with case and add musl tripletKhem Raj2014-08-161-10/+10
| | | | | | | | | Simplifies the code and adds knowlwdge about musl targets (From OE-Core rev: 106305227003761c3fc562c21bb859a5256f2b36) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* avahi-ui: drop rmdir localstatedir in bb recipeRobert Yang2014-08-161-1/+0
| | | | | | | | | | | | There is a "rmdir --ignore-fail-on-non-empty ${D}${localstatedir}" in avahi.inc, so drop the one in avahi-ui_0.6.31.bb, otherwise do_install error: rmdir: failed to remove `/path/to/image/var': No such file or directory (From OE-Core rev: 8111ab4cdadb4b7523652c593c48da74d9d0f8ef) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* avahi: unset FILES_avahi to avoid packaging files thereRoss Burton2014-08-151-1/+5
| | | | | | | | | | | | | | | The main avahi recipe doesn't package anything into ${PN}. If a library is enabled but not put into a separate package it ends up in ${PN} and all the packages are renamed using it's soname - ie libdns-sd-daemon. Avoid this by clearing FILES_avahi so extra files are unpackaged instead of creating a new package. Also actually remove /var as the comments claim so the avahi package is truly empty. (From OE-Core rev: 324c6ac33ab44e4c1949b8001a53a8ffd2a979e2) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* openssl: upgrade to 1.0.1iPaul Eggleton2014-08-112-48/+2
| | | | | | | | | Removed one patch merged upstream. (From OE-Core rev: fc1d2b4ec7e7f5c5e2b3434bc8208967ead6f336) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* wpa-supplicant: use PACKAGECONFIG for ssl selectionYasir-Khan2014-08-112-4/+18
| | | | | | | | | | | Select between openssl or gnutls as ssl implementation via PACKAGECONFIG instead of explicitly adding both via DEPENDS. (From OE-Core rev: 0be9be4055e5b7f649d523a38344d3964dc9fdc4) Signed-off-by: Yasir-Khan <yasir_khan@mentor.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* connman: Fix PPTP VPN plugin QA issueJukka Rissanen2014-07-232-0/+33
| | | | | | | | | | | | | | This error was seen when building ConnMan. Fixed by not building ConnMan pptp plugin with module versioning info. ERROR: QA Issue: non -dev/-dbg/-nativesdk package contains symlink .so: connman-plugin-vpn-pptp path '/work/core2-32-oe-linux/connman/1.24+gitAUTOINC+42779cd63c-r20/packages-split/connman-plugin-vpn-pptp/usr/lib/connman/scripts/libppp-plugin.so' [dev-so] ERROR: QA run found fatal errors. Please consider fixing them. ERROR: Function failed: do_package_qa (From OE-Core rev: d2328d6aa52fd4f0b47ae3292ae6ae07301bf9d0) Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* openssh: use pidfile in initscriptRichard Tollerton2014-07-191-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | Stopping sshd must only kill the listening (top-level) daemon; it must not stop any other sshd process, because those are forked ssh connections which may include e.g. the connection that called /etc/init.d/sshd stop. This initscript uses "start-stop-daemon -x <exe>" for starting/stopping. When that is provided by busybox, this behavior is broken: `/etc/init.d/sshd stop` stops *all* sshd processes. This was caused by a fix to busybox 1.20: 17eedcad9406c43beddab3906c8c693626c351fb "ssd: compat: match -x EXECUTABLE by /proc/pid/exe too". The fix is to use a pidfile. All initscripts in upstream openssh do this, as does dropbear. Acked-by: Gratian Crisan <gratian.crisan@ni.com> Acked-by: Ken Sharp <ken.sharp@ni.com> (From OE-Core rev: 993405285e547403d5c753adfa91c26c43be13f6) Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-05-25 08:50:11 +0000