| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some boards are configured to read a script or environment file as part
of the u-boot boot sequence. This file, typically called 'uEnv.txt' or
'boot.scr', would be deployed alongside the u-boot binary. If a recipe
uses this u-boot.inc, such a file can be deployed by setting the optional
UBOOT_ENV parameter and including the file in the SRC_URI. For example:
SRC_URI_append_overo = "file://uEnv.txt"
UBOOT_ENV_overo = "uEnv"
(From OE-Core rev: 1506c40c93651356b9fe2f7184b5e26f99e22686)
Signed-off-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We have this in recipes-bsp/grub/grub/40_custom:
[snip]
menuentry "Linux" {
set root=(hd0,1)
linux /vmlinuz root=__ROOTFS__ rw __CONSOLE__ __VIDEO_MODE__ __VGA_MODE__ quiet
}
[snip]
These lines are only for initrdscripts/files/init-install.sh, the side
effect is that it would make the target's grub-mkconfig doesn't work
well since the 40_custom will be installed to /etc/grub.d/40_custom, the
grub-mkconfig will run the 40_custom, and there will always be a
'menuentry "Linux"' menu in grub.cfg no matter it is valid or not, we
can do this in init-install.sh rather than grub to fix the problem,
which is also much simpler.
We have done the related work in init-install.sh, now we need remove our own
40_custom, and use grub's own 40_custom which is the right one.
(From OE-Core rev: 4fad24fef5552bd0e4a5ea0982573ba8e4523570)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch fixes a build warning which is promoted to an error via -Werror.
changes from v1:
* put "Upstream-Status" in patch itself, not in OE patch header
* fix commit wording
(From OE-Core rev: 4b41f4199d77144a629897173cff3d1efcfa85f9)
Signed-off-by: Trevor Woerner <trevor.woerner@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
| |
These recipes all use pkg-config in some way but were missing
dependencies on the tool, this patch adds them.
(From OE-Core rev: 2543b14dd0ca13005be0df027543431fc8e882ae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This fixes a compatibility issue between v86d
and SeaBIOS VGA BIOS where the leal instruction
is not decoded properly. Read the
http://thread.gmane.org/gmane.comp.emulators.qemu/271806
thread for more details.
Patch taken from upstream.
(From OE-Core rev: 3e890dd00ed27cc30800caefa85827cb16da5a3a)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
| |
(From OE-Core rev: 5eb90ef508b041dcae5a16b9696d3688659b8f39)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
However in u-boot no FILESPATH additions are currently needed so
instead it should be removed.
(From OE-Core rev: f8675ffa3f90d4e411a82d33ac8319f2c4c19235)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
x-load has been superseded by u-boot SPL for all cortex based TI SoCs.
For legacy boards meta-ti layer (that contains a maintained recipe)
should be used instead.
(From OE-Core rev: 3a675df3dd608b6e7250a3b0bfc9362d2f4e8aa9)
Signed-off-by: Petter Mabacker <petter@technux.se>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Replace:
cat <file> | sed -e xxx
By:
sed -e xxx <file>
(From OE-Core rev: 3bfaea36a4484f1db0340cd67f7783ccec23c738)
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Replace:
cat <file> | sed -e xxx
By:
sed -e xxx <file>
(From OE-Core rev: 49345d83f280da13b7993971a336c6176587961d)
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
| |
(From OE-Core rev: ec6158c0a41a929bac6df9d4ab62afa5dc39544e)
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This allows us to remove the following uses of PRINC in meta-raspberrypi:
recipes-bsp/formfactor/formfactor_0.0.bbappend:
PRINC = "1"
recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend:
PRINC := "${@int(PRINC) + 5}"
(From OE-Core rev: cffbd11d915fe8a1399f23c97c4e2ecbdae4d00a)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The class itself currently does nothing. The idea is to mark all recipes that
make use of the texinfo utilities. In the future, this class could be used to
suppress the generation/formatting of documentation for performance,
explicitly track dependencies on these utilities, and eliminate Yocto's
current dependency on the host system's texinfo utilities.
(From OE-Core rev: e6fb2f9afe2ba6b676c46d1eb297ca9cc532d405)
Signed-off-by: Max Eliaser <max.eliaser@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
| |
The base_contains is kept as a compatibility method and we ought to
not use it in OE-Core so we can remove it from base metadata in
future.
(From OE-Core rev: d83b16dbf0862be387f84228710cb165c6d2b03b)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
| |
Resolves warnings of this kind in the OpenPLi layer:
WARNING: Use of PRINC * was detected in the recipe *
(From OE-Core rev: 5ffb38d6ace7faae839c8cac7327b5b1c2daae1a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous behavior defines a static set of modules that are built
into the grub efi executable. This works fine for a limited set of boot
environments namely the standard linux/initrd. This patch conditionally
assigns the same modules to a variable. This allows other meta layers
to add additional modules or completely override the defaults. The use
case driving this patch is the use of multiboot2 and related modules.
(From OE-Core rev: 597f8e0040ba3135220000b23767858c64b5c9b8)
Signed-off-by: Philip Tricca <flihp@twobit.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
| |
Debugedit errors out on bare metal binaries. The first version of this patch limited it to 64 bit targets, but the problem now shows up on 32 bit targets (minnowboard) as well.
(From OE-Core rev: f95c7611007ddda3fe36db90168c7d5de096f9cd)
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix beaglebone boot issue with large kernel images overwriting Device Tree.
See very detailed comments inside the patch.
The original patch is being reviewed upstream and is targeting mainline U-boot
version 2014.07. This is the adaptation of the patch for 2013.07 version we use
(From OE-Core rev: cd495307d233b81ebeb43198d13bbd4b3ad7407f)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix the warning:
WARNING: QA Issue: gummiboot: Files/directories were installed but not shipped
/usr/lib
/usr/lib/gummiboot
/usr/lib/gummiboot/gummibootx64.efi
This is because it uses "/usr/lib" in gummibootlibdir, use ${libdir} to
fix it.
(From OE-Core rev: ee587332f2ac9d88d4a300732645b0e2f793ce5f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix the error:
[snip]
| nm -D -u src/efi/gummiboot.so | grep ' U ' && exit 1 || :
| objcopy -j .text -j .sdata -j .data -j .dynamic \
| -j .dynsym -j .rel -j .rela -j .reloc -j .eh_frame \
| --target=efi-app-x86_64 src/efi/gummiboot.so gummibootx64.efi
| objcopy: src/efi/gummiboot.so: Invalid bfd target
| make[1]: *** [gummibootx64.efi] Error 1
| make[1]: *** Waiting for unfinished jobs....
| make: *** [all] Error 2
[snip]
It uses the "objcopy" directly, which is not suitable for cross compile.
[YOCTO #6054]
(From OE-Core rev: 393fe40c14e7adeadbccb72953027b63b6f8030c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The gummiboot depends on gnu-efi which had set:
COMPATIBLE_HOST = "(x86_64.*|i.86.*)-linux"
We also need set this for gummiboot, otherwise there would be build
failures for other non-x86 archs.
(From OE-Core rev: f1b23a32d0c823577cec532e3646c2f78e81ccda)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Its LIBDIR in Makefile is:
LIBDIR = $(PREFIX)/lib
This is incorrect for 64 bit bsp, thus will cause build failures on gummiboot:
ld: cannot open linker script file /path/to/usr/lib64/elf_x86_64_efi.lds: No such file or directory
[YOCTO #6053]
(From OE-Core rev: a18e4bef5f284c5b940007e60c7be28128a94c44)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
gummiboot is a simple UEFI boot manager.
Recipe imported from meta-intel with these changes:
- drop PR and update configure options
- upgraded to latest version
A couple of notes:
- If you wish you can install the gummiboot package on the target and
use 'gummiboot install' to add the payload to the ESP (see gummiboot --help,
just make sure the ESP partition has the boot flag on as gummiboot won't accept it
otherwise). However the point of this recipe is to be used by bootimg.bbclass and
generate images with gummiboot instead of grub-efi.
- You need a kernel which has CONFIG_EFI_STUB=y at least
- The default linux-yocto kernel config does not enable that, easiest way
to enable is to build with KERNEL_FEATURES_append = " cfg/efi-ext" in local.conf
(From OE-Core rev: 8f95d0598c31fff76e2a58fecb6c96197121a044)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
| |
gnu-efi is required by gummiboot.
Imported from meta-intel, PR dropped, no new version available.
(From OE-Core rev: fdb65c569db2b55023f9d1d72959e4e7d187a1d8)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Our kernel's name is bzImage, we need add it to grub.d/10_linux.in so
that the grub-mkconfig and grub-install can work correctly on the
target.
(From OE-Core rev: 1dd9a16030bc2dc673c7b121dea6e78f2681f55e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Our kernel's name is bzImage, we need add it to grub.d/10_linux.in so
that the grub-mkconfig and grub-install can work correctly on the
target.
(From OE-Core rev: 6677bb09ae64e878b12552caef999b60bc99d0e4)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Our kernel's name is bzImage, we need add it to grub.d/10_linux.in so
that the grub-mkconfig and grub-install can work correctly on the
target.
(From OE-Core rev: c972e122066aa80550155feea619908f6d3c3176)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
| |
(From OE-Core rev: ee4a68dd11d6c18681a6d3fdbcd7428136eaaf62)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Despite the fact that it's currently specific to the Sharp Zaurus, we
kept this in OE-Core up to now as a potential basis for better handling
of device-specific customisations for a wider range of devices. Whilst
moving device-specific customisations to a more central point is still
a laudable goal, these days such functionality probably wouldn't be
implemented on top of zaurusd or even in the same way as zaurusd, and
thus it makes sense to leave its recipe to be maintained in the
meta-handheld layer (where a current recipe already exists.)
(From OE-Core rev: 3255b9de49c8b4d74cce3a2a0e750d3d3e698b59)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
| |
Those recipes need PR bump so we drop PRINC from meta-fsl-arm layer.
(From OE-Core rev: b60c68a4ea937a647e13d69dfecefb7dcbda95a0)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* resolves following warnings:
WARNING: Use of PRINC 17 was detected in the recipe meta-openembedded/meta-systemd/recipes-core/systemd/systemd-machine-units_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-gpe/recipes-support/fbreader/fbreader_0.12.10.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-gpe/recipes-support/fbreader/fbreader_git.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-multimedia/recipes-multimedia/sox/sox_14.4.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-oe/recipes-multimedia/mplayer/mplayer-common.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-smartphone/meta-android/recipes-bsp/chroot-script/chroot-script_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-connectivity/avahi/avahi-ui_0.6.31.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-connectivity/bind/bind_9.8.1.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-core/systemd/systemd-serialgetty.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-core/sysvinit/sysvinit-inittab_2.88dsf.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/screen/screen_4.0.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/shadow/shadow-securetty_4.1.4.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/shadow/shadow_4.1.4.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-graphics/libsdl/libsdl_1.2.15.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-graphics/packagegroups/packagegroup-core-x11-xserver.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-kernel/modutils-initscripts/modutils-initscripts.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-multimedia/libsndfile/libsndfile1_1.0.25.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-support/libcap/libcap_2.22.bb (or one of its .bbappends)
WARNING: Use of PRINC 11 was detected in the recipe openembedded-core/meta/recipes-bsp/keymaps/keymaps_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 11 was detected in the recipe openembedded-core/meta/recipes-core/systemd/systemd-compat-units.bb (or one of its .bbappends)
WARNING: Use of PRINC 12 was detected in the recipe openembedded-core/meta/recipes-core/initscripts/initscripts_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 13 was detected in the recipe openembedded-core/meta/recipes-core/base-files/base-files_3.0.14.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe meta-openembedded/meta-oe/recipes-navigation/navit/navit_svn.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe meta-openembedded/meta-oe/recipes-support/lvm2/lvm2_2.02.97.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-connectivity/portmap/portmap_6.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-extended/pam/libpam_1.1.6.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-graphics/packagegroups/packagegroup-core-x11.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe meta-openembedded/meta-efl/recipes-efl/efl/entrance_svn.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe meta-openembedded/meta-oe/recipes-multimedia/mplayer/mplayer2_git.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-bsp/formfactor/formfactor_0.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-connectivity/avahi/avahi_0.6.31.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-connectivity/dhcp/dhcp_4.2.5-P1.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-core/init-ifupdown/init-ifupdown_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 5 was detected in the recipe meta-openembedded/meta-oe/recipes-core/meta/distro-feed-configs.bb (or one of its .bbappends)
WARNING: Use of PRINC 5 was detected in the recipe openembedded-core/meta/recipes-connectivity/bluez/bluez4_4.101.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-core/packagegroups/packagegroup-base.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-core/packagegroups/packagegroup-core-boot.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bb (or one of its .bbappends)
WARNING: Use of PRINC 7 was detected in the recipe meta-openembedded/meta-oe/recipes-navigation/gpsd/gpsd_3.7.bb (or one of its .bbappends)
WARNING: Use of PRINC 7 was detected in the recipe openembedded-core/meta/recipes-core/udev/udev-extraconf_1.0.bb (or one of its .bbappends)
(From OE-Core rev: c6825ec6e92e20bb64a051d1576f363c16e98d68)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch goes through the OE-Core recipes and marks those which use autotools
but don't support a separate build directory (${S} != ${B}). A new class,
autotools-brokensep is used for this purpose.
This doesn't introduce any change in behaviour in its own right.
(From OE-Core rev: 006b8a7808a58713af16c326dc37d07765334b12)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Exclude the .pc from po/POTFILES.in since quilt uses "patch --backup",
which will create the backup file under .pc, this may cause unexpected
errors, for example, on CentOS 5.x, if the backup file is null
(newfile), it's mode will be 000, then we will get errors when xgettext
try to read it.
(From OE-Core rev: fe037904ce8a90f428645c19587913c7b90652ef)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Completes previous commit b5292d4115a4555a66b5e35acdc67dd71fb8577f.
Updates SUMMARY[doc] (meta/conf/documentation.conf).
Changes:
- rename DESCRIPTION with length < 80 to (non present tag) SUMMARY
- drop final point character at the end of SUMMARY string
- remove trailing whitespace of SUMMARY line
Note: don't bump PR
(From OE-Core rev: ad17dfd31a2b97b3e610a0ea0889f5ecb2a63b97)
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fixes build failures on uclibc
| lsusb-usbmisc.o: In function `usb_string_to_native':
|
/home/kraj/work/angstrom-repo/build/tmp-angstrom_next-uclibc/work/armv7at2hf-vfp-neon-angstrom-linux-uclibceabi/usbutils/007-r0/usbutils-007/usbmisc.c:190:
undefined reference to `libiconv_open'
|
/home/kraj/work/angstrom-repo/build/tmp-angstrom_next-uclibc/work/armv7at2hf-vfp-neon-angstrom-linux-uclibceabi/usbutils/007-r0/usbutils-007/usbmisc.c:199:
undefined reference to `libiconv'
|
/home/kraj/work/angstrom-repo/build/tmp-angstrom_next-uclibc/work/armv7at2hf-vfp-neon-angstrom-linux-uclibceabi/usbutils/007-r0/usbutils-007/usbmisc.c:202:
undefined reference to `libiconv_close'
| collect2: error: ld returned 1 exit status
| make[2]: *** [lsusb] Error 1
(From OE-Core rev: c782d07597c9839aca755c63c65b46c165d54042)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
| |
Rename SUMMARY with length > 80 to DESCRIPTION.
Note: don't bump PR
(From OE-Core rev: b5292d4115a4555a66b5e35acdc67dd71fb8577f)
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
| |
Prefix to EnvironmentFile should be preciding the filenamn.
(From OE-Core rev: 1f694e4cb493b0737b6009382c0957e6837ebbed)
Signed-off-by: Tobias Blom <tobias.blom@techne-dev.se>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Instead of manually adding initscripts to RDEPENDS of each package,
we should make it automatically handled by the update-rc.d.bbclass.
This solution would have the benefit of backward compatibility. In
other words, users need not modify their recipes.
This reverts commit 16080a3485bd793edd66ed8361f1e8b86a9e19ea.
(From OE-Core rev: f9f193219bd510160b6b09bae652a9dc8ea01e7b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
grub-2.00-disable-help2man patches configure.ac to disable the help2man check
because we don't need the man pages. It also then patches configure itself so
that autogen.sh doesn't have to be called for performance reasons. However,
do_configure causes a full autoreconf so this optimisation is moot, and can
cause patch failures when an existing build tree is re-used.
Instead, simply use CACHED_CONFIGUREVARS to tell configure that it can't find
help2man.
(From OE-Core rev: 34b9b2931da1fbf4c68a3e35f4ca56553058574b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Drop the 2 patches since the functionality is upstream now.
Also sync PACKAGECONFIG with grub 2.00 recipe.
The debugedit problem for 64 bit machines in do_package is still present, though:
ERROR: debugedit failed with exit code 256 (cmd was '/build/linaro/build/build/tmp-eglibc/sysroots/x86_64-linux/usr/lib/rpm/bin/debugedit' -b '/build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux' -d '/usr/src/debug' -i -l '/build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux/grub/2.00+AUTOINC+0776112c53-r0/debugsources.list' '/build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux/grub/2.00+AUTOINC+0776112c53-r0/package/usr/lib/grub/arm64-efi/cpio_be.module'):
/build/linaro/build/build/tmp-eglibc/sysroots/x86_64-linux/usr/lib/rpm/bin/debugedit: /build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux/grub/2.00+AUTOINC+0776112c53-r0/package/usr/lib/grub/arm64-efi/cpio_be.module: Unhandled relocation 258 in .debug_info section
ERROR: Function failed: split_and_strip_files
ERROR: Logfile of failure stored in: /build/linaro/build/build/tmp-eglibc/work/aarch64-oe-linux/grub/2.00+AUTOINC+0776112c53-r0/temp/log.do_package.29234
ERROR: Task 10 (/build/linaro/build/openembedded-core/meta/recipes-bsp/grub/grub_git.bb, do_package) failed with exit code '1'
(From OE-Core rev: cd29ff3927a6deae5e808525bd56acf7b4b0b60c)
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
| |
Fixes GNU_HASH problem by adding LDFLAGS to TARGET_CC_ARCH
(From OE-Core rev: 7b69e70f68da163e95f5e263832a85f1a0070006)
Signed-off-by: Yasir-Khan <yasir_khan@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
| |
Avoids it's auto-detected from sysroot, which will lead implicit results.
(From OE-Core rev: 6f9e72f77cd0b06c5ad753cb9ab05dd681690c6b)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
| |
Recently grub git gained support for ARM builds (using u-boot or EFI as first stage loader) and with 2 extra patches we get support for 64-bit ARM as well.
Buildtested for genericarmv7a, genericarmv8 and qemux86. The genericarmv8 build fails in do_package/strip due to a binutils problem.
(From OE-Core rev: b4e28912af0618755ce75d0cc27d53fa9d745b30)
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
| |
Now that the initscripts-functions has been packaged separately,
packages which may use the functions script should have a runtime
dependency on it.
(From OE-Core rev: 6690c12cb1977f6bf93f3eb6d471dbd7db81bf28)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
| |
(From OE-Core rev: bbd88aebcabbb19c27a7d752d4a5b8ad9ff9412e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
| |
* Move package-specific defitions to the end
* Define pciutils-ids package as ${PN}-ids
* Add SUMMARY and tweak DESCRIPTION for pciutils-ids package
(From OE-Core rev: c8c39c78878cdffe47b376b6211dd1ae45fd59d2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
| |
Fix statement indenting and spacing issues that I happened to notice.
(From OE-Core rev: d11e297b007aba625b398c52952ec929c3b02b83)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A lot of our recipes had short one-line DESCRIPTION values and no
SUMMARY value set. In this case it's much better to just set SUMMARY
since DESCRIPTION is defaulted from SUMMARY anyway and then the SUMMARY
is at least useful. I also took the opportunity to fix up a lot of the
new SUMMARY values, making them concisely explain the function of the
recipe / package where possible.
(From OE-Core rev: b8feee3cf21f70ba4ec3b822d2f596d4fc02a292)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
| |
liblzma5 is really requiring by grub, setting RDEPENDS to xz would pull
unneeded xz binaries into rootfs.
(From OE-Core rev: 78526905999fa38047ae8f3491127cc03de3e3f6)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
-mcmodel=large is not supported by gcc with version lower
than 4.4, but we don't need to use memory over 4GiB, so add
a patch to allow compilation without large model support.
(From OE-Core rev: 1d005240bcbcca97126bddb1f6d4882ba4d81fa9)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|