summaryrefslogtreecommitdiffstats
path: root/meta/recipes-bsp
Commit message (Collapse)AuthorAgeFilesLines
* pciutils: Fix multilib header conflict - pci/config.hMing Liu2014-12-311-0/+4
| | | | | | | | | | | | | | pci/config.h conflicts between 32-bit and 64-bit versions. (From OE-Core rev: 21fb6bc1b030cab14e2c9b14607b34a62262ac06) (From OE-Core rev: e54e5b792f9b6fa8bb2ed3123518709c882859a4) Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* acpid: use ${PN} for SYSTEMD_SERVICEChen Qi2014-09-291-2/+1
| | | | | | | | | | | | We should use ${PN} instead of 'acpid' for SYSTEMD_SERVICE, otherwise we would have the 'installed-not-shipped' QA error if multilib is enabled and we run `bitbake lib32-acpid'. (From OE-Core rev: f8217853c69cf06c92b2f3885f7d49851213188f) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* u-boot: cleanup indentation and consolidate .inc fileDenys Dmytriyenko2014-09-225-36/+30
| | | | | | | (From OE-Core rev: 71525643909ac765e6b6a4b419cddae7d5812a8d) Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* hostap-utils: obey LDFLAGSChristopher Larson2014-09-222-0/+28
| | | | | | | (From OE-Core rev: 6b2395210e8c7fd7eb91fa78e043a811c3c0af3d) Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* setserial: obey LDFLAGSChristopher Larson2014-09-222-0/+25
| | | | | | | (From OE-Core rev: aaebe0f814a031b06ba72bc9de8b5ec4dbf80f0a) Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* grub-efi: Replace _BSD_SOURCE macro with _DEFAULT_SOURCERobert Yang2014-09-162-0/+33
| | | | | | | | | | | | | | | This is needed with glibc 2.20 since _BSD_SOURCE macro is gone Khem fixed grub, but the grub-efi also needs it, the patch can't apply to grub-efi, so made a new patch for it. (From OE-Core rev: da120dec96f8f019c0fd50576fb7490689234257) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* v86d: mask fbsetup when necessaryChen Qi2014-09-031-0/+10
| | | | | | | | | | | | When 'sysvinit' and 'systemd' are both in DISTRO_FEATURES, we need to prevent the init script from running via systemd. This is because that the functionality has been implemented internally in systemd. (From OE-Core rev: 2236678e38b22b763de8322d90585cbf648a448c) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* keymaps: mask keymap when necessaryChen Qi2014-09-031-0/+10
| | | | | | | | | | | | When 'sysvinit' and 'systemd' are both in DISTRO_FEATURES, we need to prevent the init script from running via systemd. This is because that the functionality of the init script has implemented in systemd internally. (From OE-Core rev: 8cfba07e24dae3d1837ccb5cb04e11f362519b0a) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* keymaps: remove dependency on initscriptsChen Qi2014-09-031-4/+1
| | | | | | | | | | The 'keymaps' package actually doesn't have runtime dependency on VIRTUAL-RUNTIME_initscripts, thus removing this dependency. (From OE-Core rev: 2cf66a552a4966cb9c2f2475c622560cbe9db07b) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* acpid: upgrade to 2.0.22 and add systemd supportChen Qi2014-09-034-26/+23
| | | | | | | | | | | | For acpid needs to upgrade to work correctly with the new kernel. The new version now uses autotools. Also add systemd unit file. (From OE-Core rev: 93805abedb5563a91886f330153b179033a29d11) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* v86d: set INHIBIT_UPDATERCD_BBCLASS if 'sysvinit' not in DISTRO_FEATURESChen Qi2014-09-031-0/+7
| | | | | | | | | | | | | | | Set INHIBIT_UPDATERCD_BBCLASS to "1" if 'sysvinit' is not in DISTRO_FEATURES. The functionality of the init script 'fbsetup' is implemented internally in systemd. So fbsetup is not installed if 'sysvinit' is in DISTRO_FEATURES. That's why we need to set INHIBIT_UPDATERCD_BBCLASS to "1" to avoid generation of update-rc.d related preinst/postinst scripts. (From OE-Core rev: 640a2231597d74517527ebedb6fd141278ba06f4) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* keymaps: fix for systemdChen Qi2014-09-031-2/+15
| | | | | | | | | | | | | | | Only install 'keymap.sh' script if 'sysvinit' is in DISTRO_FEATURES. This is because systemd internally provides a mechanism to implement the functionality this script tries to implement. Please see systemd-vconsole-setup.service for more details. Also we set 'INHIBIT_UPDATERCD_BBCLASS' to "1" if 'sysvinit' is not in DISTRO_FEATURES. (From OE-Core rev: 5e0aa114241b956f61cf852e1f4ff41b576adff4) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* alsa-state: fix pkg_postinst and set INHIBIT_UPDATERCD_BBCLASSChen Qi2014-09-031-4/+7
| | | | | | | | | | | | | | | As alsa-state inherits update-rc.d, the update-rc.d part inpostinst script has already been handled in update-rc.d.bbclass. Besides, we need to set INHIBIT_UPDATERCD_BBCLASS to "1" if 'sysvinit' is not in DISTRO_FEATURES. This is because the init script is not installed in such situation, adding update-rc.d part in the preinst/postinst scripts just makes no sense. (From OE-Core rev: 9b9da6667b606a56c89abc1b458f52dcca9774e9) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* grub: Replace _BSD_SOURCE macro with _DEFAULT_SOURCEKhem Raj2014-09-012-0/+33
| | | | | | | | | | This is needed with glibc 2.20 since _BSD_SOURCE macro is gone (From OE-Core rev: 12edeff6f23512ff88097f7ca4cf30ca3653d2eb) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* grub_2.00: strip the sparc64 files from buildingNitin A Kamble2014-08-232-0/+105
| | | | | | | | | | | | Avoid building and packaging of sparc64 specific files in the x86 builds. Fixes Bug: [YOCTO #6427] (From OE-Core rev: e9d1264a63f47965c2f10e18e532b117bbda26be) Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* pm-utils: add bash to RDEPENDS_pm-utilsRobert Yang2014-08-231-1/+1
| | | | | | | | | | Bash script: pm-utils/usr/lib64/pm-utils/sleep.d/98video-quirk-db-handler (From OE-Core rev: 5a788c077ba2a0ab6bcc39f19d5e047410bc8355) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* v86d: fix for systemd to load uvesafb module correctlyChen Qi2014-08-112-2/+14
| | | | | | | | | | | | | | | | The /etc/init.d/fbsetup script doesn't have any effect in a systemd image. Its purpose is to load the uvesafb kernel module at boot. This functionality could be achieved by adding a configuration file under /etc/modules-load.d/ directory which would be parsed by the systemd-modules-load.service. [YOCTO #4420] (From OE-Core rev: 6d55a03d5cc8070d589c1fe7df74279208833383) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* alsa-state: install init script only when 'sysvinit' is in DISTRO_FEATURESChen Qi2014-08-111-3/+7
| | | | | | | | | | | | | | | | The /etc/init.d/alsa-state is totally useless for a systemd image. Its functionality has been replaced by alsa-state.service files. So if 'sysvinit' is not in DISTRO_FEATURES, installing this script doesn't make any sense. [YOCTO #4420] (From OE-Core rev: 39759640c8abe51c8ded4c1ca6853b523a81c2f5) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* u-boot-mkimage: fix recompile errorRobert Yang2014-08-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Fixed: make: *** No rule to make target `/path/to/sysroot/4.9.0/include/stddef.h', needed by `crc32.o'. Stop. make: *** Waiting for unfinished jobs.... ERROR: oe_runmake failed This happens when upgrade gcc from 4.9.0 to 4.9.1, and the .depend isn't regenerated when recompile, the content of it are: [snip] crc32.o: /path/to/sysroot/4.9.0/include/stddef.h [snip] And Makefile includes the .depend file if it exists, so there would be errors when /path/to/sysroot/4.9.0/include/stddef.h doesn't exist. Remove .*.d (a few .d files, its Makefile uses this wildcard) will fix the problem. (From OE-Core rev: b31dd7d1fbdd9165872a31c11c6627549609fcb3) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* formfactor: Grammar fix in recipe comment.Robert P. J. Day2014-08-061-1/+1
| | | | | | | (From OE-Core rev: d6eebc2ce20c4826ca37e9c4d5ea602875d07703) Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* grub_git: bump version, remove patchTrevor Woerner2014-07-192-36/+1
| | | | | | | | | | | A previously upstreamed patch has been applied. Bump the version to incorporate this upstream update. (From OE-Core rev: 72f3c0eb12fbad7318573c060b0f84993048fdcc) Signed-off-by: Trevor Woerner <trevor.woerner@linaro.org> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* grub-core: fix endianness problemShan Hai2014-07-192-0/+45
| | | | | | | | | | Fix tftp stalls on loading files bigger than ~32k bug by cherry picking a patch from grub upstream. (From OE-Core rev: adac8c63a0eefd3ce118f8964b05a952e629da38) Signed-off-by: Shan Hai <shan.hai@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* setserial: add missing depends on groff-nativeYue Tao2014-07-161-0/+2
| | | | | | | | | | | | | | [YOCTO #6526] setserial needs groff-native to build (From OE-Core rev: 1a1d1d89b490703ec163b82ba93f10a7d3e93270) Signed-off-by: Jonas Zetterberg <jonas.zetterberg@windriver.com> Signed-off-by: Yue Tao <yue.tao@windriver.com> Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta: fix no newline at end of fileRobert Yang2014-07-031-1/+1
| | | | | | | | | | | Add a '\n' to the last line of the file to fix: No newline at end of file (From OE-Core rev: b3090263ba31702631270643c7a7d7af8f4d9234) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* u-boot-fw-utils: install config fileMaxin B. John2014-06-251-0/+2
| | | | | | | | | | The on-target fw_printenv and fw_setenv needs configuration file (fw_env.config) to be present in the target. (From OE-Core rev: b4cd268cf7506a521d7800112cb775bd49e1ef09) Signed-off-by: Maxin B. John <maxin.john@enea.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* u-boot: Optionally deploy an environment or script fileAsh Charles2014-06-251-0/+25
| | | | | | | | | | | | | | | | Some boards are configured to read a script or environment file as part of the u-boot boot sequence. This file, typically called 'uEnv.txt' or 'boot.scr', would be deployed alongside the u-boot binary. If a recipe uses this u-boot.inc, such a file can be deployed by setting the optional UBOOT_ENV parameter and including the file in the SRC_URI. For example: SRC_URI_append_overo = "file://uEnv.txt" UBOOT_ENV_overo = "uEnv" (From OE-Core rev: 1506c40c93651356b9fe2f7184b5e26f99e22686) Signed-off-by: Ash Charles <ashcharles@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* grub-2.00: remove our 40_customRoy Li2014-06-063-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We have this in recipes-bsp/grub/grub/40_custom: [snip] menuentry "Linux" { set root=(hd0,1) linux /vmlinuz root=__ROOTFS__ rw __CONSOLE__ __VIDEO_MODE__ __VGA_MODE__ quiet } [snip] These lines are only for initrdscripts/files/init-install.sh, the side effect is that it would make the target's grub-mkconfig doesn't work well since the 40_custom will be installed to /etc/grub.d/40_custom, the grub-mkconfig will run the 40_custom, and there will always be a 'menuentry "Linux"' menu in grub.cfg no matter it is valid or not, we can do this in init-install.sh rather than grub to fix the problem, which is also much simpler. We have done the related work in init-install.sh, now we need remove our own 40_custom, and use grub's own 40_custom which is the right one. (From OE-Core rev: 4fad24fef5552bd0e4a5ea0982573ba8e4523570) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Roy Li <rongqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* grub_git: fix build warning->errorTrevor Woerner2014-06-032-0/+35
| | | | | | | | | | | | | | This patch fixes a build warning which is promoted to an error via -Werror. changes from v1: * put "Upstream-Status" in patch itself, not in OE patch header * fix commit wording (From OE-Core rev: 4b41f4199d77144a629897173cff3d1efcfa85f9) Signed-off-by: Trevor Woerner <trevor.woerner@linaro.org> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* recipes: Add missing pkgconfig class inheritsRichard Purdie2014-06-032-2/+2
| | | | | | | | | These recipes all use pkg-config in some way but were missing dependencies on the tool, this patch adds them. (From OE-Core rev: 2543b14dd0ca13005be0df027543431fc8e882ae) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* v86d: fix for SeaBIOS VGA BIOS compatibilityCristian Iorga2014-06-032-1/+21768
| | | | | | | | | | | | | | This fixes a compatibility issue between v86d and SeaBIOS VGA BIOS where the leal instruction is not decoded properly. Read the http://thread.gmane.org/gmane.comp.emulators.qemu/271806 thread for more details. Patch taken from upstream. (From OE-Core rev: 3e890dd00ed27cc30800caefa85827cb16da5a3a) Signed-off-by: Cristian Iorga <cristian.iorga@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lrzsz: fix autoheader warning due to missing AC_DEFINE templateRoss Burton2014-06-012-0/+20
| | | | | | | (From OE-Core rev: 5eb90ef508b041dcae5a16b9696d3688659b8f39) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* u-boot: remove unused FILESPATHPetter Mabäcker2014-05-131-1/+0
| | | | | | | | | | | | | | Fixes [YOCTO #4497] Usage of FILESPATH is discouraged, since it can make recipes harder to bbappend. Instead FILESEXTRAPATHS should be used to extend the path. However in u-boot no FILESPATH additions are currently needed so instead it should be removed. (From OE-Core rev: f8675ffa3f90d4e411a82d33ac8319f2c4c19235) Signed-off-by: Petter Mabäcker <petter@technux.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* x-load: remove recipePetter Mabacker2014-05-083-79/+0
| | | | | | | | | | | | x-load has been superseded by u-boot SPL for all cortex based TI SoCs. For legacy boards meta-ti layer (that contains a maintained recipe) should be used instead. (From OE-Core rev: 3a675df3dd608b6e7250a3b0bfc9362d2f4e8aa9) Signed-off-by: Petter Mabacker <petter@technux.se> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* apmd: avoid pipe with sedMatthieu Crapet2014-05-081-1/+1
| | | | | | | | | | | | | Replace: cat <file> | sed -e xxx By: sed -e xxx <file> (From OE-Core rev: 3bfaea36a4484f1db0340cd67f7783ccec23c738) Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* acpid: avoid pipe with sedMatthieu Crapet2014-05-081-1/+1
| | | | | | | | | | | | | Replace: cat <file> | sed -e xxx By: sed -e xxx <file> (From OE-Core rev: 49345d83f280da13b7993971a336c6176587961d) Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* grub git: update to latest git (grub-2.02-beta2-81-g4b8b913)Fathi Boudra2014-05-061-1/+1
| | | | | | | | (From OE-Core rev: ec6158c0a41a929bac6df9d4ab62afa5dc39544e) Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* PR bumps to remove PRINC usage from meta-raspberrypiPaul Barker2014-05-021-1/+1
| | | | | | | | | | | | | | | This allows us to remove the following uses of PRINC in meta-raspberrypi: recipes-bsp/formfactor/formfactor_0.0.bbappend: PRINC = "1" recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend: PRINC := "${@int(PRINC) + 5}" (From OE-Core rev: cffbd11d915fe8a1399f23c97c4e2ecbdae4d00a) Signed-off-by: Paul Barker <paul@paulbarker.me.uk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add texinfo.bbclass; recipes that use texinfo utils at build-time inherit it.Max Eliaser2014-05-024-8/+4
| | | | | | | | | | | | | The class itself currently does nothing. The idea is to mark all recipes that make use of the texinfo utilities. In the future, this class could be used to suppress the generation/formatting of documentation for performance, explicitly track dependencies on these utilities, and eliminate Yocto's current dependency on the host system's texinfo utilities. (From OE-Core rev: e6fb2f9afe2ba6b676c46d1eb297ca9cc532d405) Signed-off-by: Max Eliaser <max.eliaser@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Globally replace 'base_contains' calls with 'bb.utils.contains'Otavio Salvador2014-04-251-1/+1
| | | | | | | | | | | The base_contains is kept as a compatibility method and we ought to not use it in OE-Core so we can remove it from base metadata in future. (From OE-Core rev: d83b16dbf0862be387f84228710cb165c6d2b03b) Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* PR bumps to remove PRINC use in meta-openpliMike Looijmans2014-04-241-1/+1
| | | | | | | | | Resolves warnings of this kind in the OpenPLi layer: WARNING: Use of PRINC * was detected in the recipe * (From OE-Core rev: 5ffb38d6ace7faae839c8cac7327b5b1c2daae1a) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* grub-efi: Use a variable to specify built-in grub modules.Philip Tricca2014-04-231-1/+3
| | | | | | | | | | | | | | The previous behavior defines a static set of modules that are built into the grub efi executable. This works fine for a limited set of boot environments namely the standard linux/initrd. This patch conditionally assigns the same modules to a variable. This allows other meta layers to add additional modules or completely override the defaults. The use case driving this patch is the use of multiboot2 and related modules. (From OE-Core rev: 597f8e0040ba3135220000b23767858c64b5c9b8) Signed-off-by: Philip Tricca <flihp@twobit.us> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* grub git: workaround debugedit problemsKoen Kooi2014-04-231-0/+4
| | | | | | | | | Debugedit errors out on bare metal binaries. The first version of this patch limited it to 64 bit targets, but the problem now shows up on 32 bit targets (minnowboard) as well. (From OE-Core rev: f95c7611007ddda3fe36db90168c7d5de096f9cd) Signed-off-by: Koen Kooi <koen.kooi@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* u-boot: fix beaglebone boot issue with large kernel imagesDenys Dmytriyenko2014-04-192-1/+77
| | | | | | | | | | | | | Fix beaglebone boot issue with large kernel images overwriting Device Tree. See very detailed comments inside the patch. The original patch is being reviewed upstream and is targeting mainline U-boot version 2014.07. This is the adaptation of the patch for 2013.07 version we use (From OE-Core rev: cd495307d233b81ebeb43198d13bbd4b3ad7407f) Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gummiboot: fix the installed but not shipped warningRobert Yang2014-03-271-0/+2
| | | | | | | | | | | | | | | | Fix the warning: WARNING: QA Issue: gummiboot: Files/directories were installed but not shipped /usr/lib /usr/lib/gummiboot /usr/lib/gummiboot/gummibootx64.efi This is because it uses "/usr/lib" in gummibootlibdir, use ${libdir} to fix it. (From OE-Core rev: ee587332f2ac9d88d4a300732645b0e2f793ce5f) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gummiboot: use objcopy from the envRobert Yang2014-03-272-1/+42
| | | | | | | | | | | | | | | | | | | | | | | Fix the error: [snip] | nm -D -u src/efi/gummiboot.so | grep ' U ' && exit 1 || : | objcopy -j .text -j .sdata -j .data -j .dynamic \ | -j .dynsym -j .rel -j .rela -j .reloc -j .eh_frame \ | --target=efi-app-x86_64 src/efi/gummiboot.so gummibootx64.efi | objcopy: src/efi/gummiboot.so: Invalid bfd target | make[1]: *** [gummibootx64.efi] Error 1 | make[1]: *** Waiting for unfinished jobs.... | make: *** [all] Error 2 [snip] It uses the "objcopy" directly, which is not suitable for cross compile. [YOCTO #6054] (From OE-Core rev: 393fe40c14e7adeadbccb72953027b63b6f8030c) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gummiboot: add COMPATIBLE_HOSTRobert Yang2014-03-271-0/+5
| | | | | | | | | | | | | | The gummiboot depends on gnu-efi which had set: COMPATIBLE_HOST = "(x86_64.*|i.86.*)-linux" We also need set this for gummiboot, otherwise there would be build failures for other non-x86 archs. (From OE-Core rev: f1b23a32d0c823577cec532e3646c2f78e81ccda) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gnu-efi: fix the LIBDIRRobert Yang2014-03-271-1/+1
| | | | | | | | | | | | | | | | | Its LIBDIR in Makefile is: LIBDIR = $(PREFIX)/lib This is incorrect for 64 bit bsp, thus will cause build failures on gummiboot: ld: cannot open linker script file /path/to/usr/lib64/elf_x86_64_efi.lds: No such file or directory [YOCTO #6053] (From OE-Core rev: a18e4bef5f284c5b940007e60c7be28128a94c44) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* recipes-bsp: Add gummiboot recipeStefan Stanacar2014-03-111-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | gummiboot is a simple UEFI boot manager. Recipe imported from meta-intel with these changes: - drop PR and update configure options - upgraded to latest version A couple of notes: - If you wish you can install the gummiboot package on the target and use 'gummiboot install' to add the payload to the ESP (see gummiboot --help, just make sure the ESP partition has the boot flag on as gummiboot won't accept it otherwise). However the point of this recipe is to be used by bootimg.bbclass and generate images with gummiboot instead of grub-efi. - You need a kernel which has CONFIG_EFI_STUB=y at least - The default linux-yocto kernel config does not enable that, easiest way to enable is to build with KERNEL_FEATURES_append = " cfg/efi-ext" in local.conf (From OE-Core rev: 8f95d0598c31fff76e2a58fecb6c96197121a044) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* recipes-bsp: add gnu-efi recipeStefan Stanacar2014-03-113-0/+103
| | | | | | | | | | | gnu-efi is required by gummiboot. Imported from meta-intel, PR dropped, no new version available. (From OE-Core rev: fdb65c569db2b55023f9d1d72959e4e7d187a1d8) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* grub-efi: add oe's kernel name to the conf fileRobert Yang2014-03-071-0/+1
| | | | | | | | | | | | Our kernel's name is bzImage, we need add it to grub.d/10_linux.in so that the grub-mkconfig and grub-install can work correctly on the target. (From OE-Core rev: 1dd9a16030bc2dc673c7b121dea6e78f2681f55e) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-12 06:04:01 +0000