summaryrefslogtreecommitdiffstats
path: root/meta/lib
Commit message (Collapse)AuthorAgeFilesLines
* lib/oeqa: targetcontrol.py: add abstraction for running tests on different ↵Stefan Stanacar2013-12-031-0/+137
| | | | | | | | | | | | | | | | | | | | | | | | targets Add a new module which abstracts the target object used by testimage.bbclass The purpose of this module is to move the deployment of a target from testimage.bbclass, basically abstracting different implementations of how we setup a target and how it runs commands. It allows to select one implementation or another by setting TEST_TARGET (currently to: "qemu" and "simpleremote"). QemuTarget is used to start a qemu instance (as it's currently done in testimage.bbclass) SimpleRemoteTarget is meant for a remote machine (by setting TEST_TARGET_IP) that's already up and running with network and ssh. Simply put, it opens the door for running the tests on different types of targets by adding new classes (maybe qemu-nfsroot or remote-special etc.). One could also override BaseTarget which currently uses the existing SSHControl module and add a serial implementation. [ YOCTO #5554 ] (From OE-Core rev: c1bfd4017f6f6502a68ceb3edf7d2027d02a309d) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* testimage: use the new targetcontrol.py module for running testsStefan Stanacar2013-12-035-46/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes the necessary changes for using the targetcontrol.py module so that one can run the same tests on a qemu instance or a remote machine based on the value of TEST_TARGET variable: "qemu" or "simpleremote". The default value is "qemu" which starts a qemu instance and it's the with what we currently have. With "simpleremote", the remote machine must be up with network and ssh and you need to set TEST_TARGET_IP with the IP address of the remote machine (it can still be a qemu instance that was manually started). Basically testimage.bbclass now does something along the lines of: - load tests -> deploy (prepare) / start target -> run tests. There were a couple of changes necessary for tests and also some cleanups/renames that were needed to adjust this change. (use ip everywhere when refering to target and server_ip when refering to host/build machine) Also two unnecessary and unsed methods were dropped from sshcontrol. [ YOCTO #5554 ] (From OE-Core rev: a7820350fa3271d78ed7476e02f4aef593be1125) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa: use the new manifest file for determining if a package is installedStefan Stanacar2013-12-031-10/+4
| | | | | | | | | | | | | | | | Use the new manifest file instead of ${WORKDIR}/installed_pkgs.txt for determining if an image has a certain package, because installed_pkgs.txt goes away with rm_work enabled. We can't use the IMAGE_MANIFEST var for the file path because that relies on IMAGE_NAME which changes at every run (because of date), so we use the link which points to the last one built. [ YOCTO #5072 ] (From OE-Core rev: f57c83fc33583c140f668946f3f3e79b960aa9ee) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/selftest: add test modules for expected bitbake output and ↵Corneliu Stoicescu2013-12-032-0/+134
| | | | | | | | | | | | bitbake-layers Tests for bitbake-layers and expected output for some bitbake options. (From OE-Core rev: 8408a7700cd9cab4559ddae0bbe57f0d7fae5c37) Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/selftest: buildoptions.py: add simple image build testsAlexandru Palalau2013-12-031-0/+86
| | | | | | | | | | | Build images and tests different build options like RM_OLD_IMAGE and for WARN_QA/ERROR_QA behaviour. (From OE-Core rev: 75d2a1a37a18a22b0da7ab5b30cf005c78bc313f) Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* scripts/oe-selftest: script to run builds as unittest against bitbake or ↵Stefan Stanacar2013-12-034-0/+264
| | | | | | | | | | | | | | | | | | | | | | | | | | | | various scripts The purpose of oe-selftest is to run unittest modules added from meta/lib/oeqa/selftest, which are tests against bitbake tools. Right now the script it's useful for simple tests like: - "bitbake --someoption, change some metadata, bitbake X, check something" type scenarios (PR service, error output, etc) - or "bitbake-layers <...>" type scripts and yocto-bsp tools. This commit also adds some helper modules that the tests will use and a base class. Also, most of the tests will have a dependency on a meta-selftest layer which contains specially modified recipes/bbappends/include files for the purpose of the tests. The tests themselves will usually write to ".inc" files from the layer or in conf/selftest.inc (which is added as an include in local.conf at the start and removed at the end) It's a simple matter or sourcing the enviroment, adding the meta-selftest layer to bblayers.conf and running: oe-selftest to get some results. It would finish faster if at least a core-image-minimal was built before. [ YOCTO #4740 ] (From OE-Core rev: 41a4f8fb005328d3a631a9036ceb6dcf75754410) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/buildhistory: add additional variables to image informationPaul Eggleton2013-12-031-2/+2
| | | | | | | | | | Add PACKAGE_EXCLUDE and NO_RECOMMENDATIONS to the info we track for images, since these can change what ends up in the image. (From OE-Core rev: a10189366f180b87f5be20b66834b7e7a9bb8c12) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sstatesig.py: Fix image regeneration issueRichard Purdie2013-11-291-1/+3
| | | | | | | | | | | | | | | With the "ABI safe" recipes, we've been excluding those from signatures. This is fine in the general case but in the specific case of image recipes it breaks. A good test case is the interfaces file. Editting this causes init-ifupdown to rebuild but not an image containing it (e.g. core-image-minimal). We need to ensure the checksums are added to the image recipes and this change does that. (From OE-Core rev: fd085f15e7cd093953f974f69277e130174d551d) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/connman: disable unique testRoss Burton2013-11-221-8/+0
| | | | | | | | | | | | | | | | | | | | The connman unique test starts another instance of connmand and then does a ps to verify that there's only one of these running, on the assumption that the new one has quit because there's already one running (started by init). However, connmand is forking into the background straight away so there's a race between running ps and the second connmand discovering the first and exiting. This race can be seen because the test displays the output of ps, and by the time that second ps has been executed the new connmand has exited. This is a classic race condition and on a heavily loaded autobuilder inserting an arbitrary sleep isn't wise. In the scheme of things this test isn't very useful, so delete it. (From OE-Core rev: 80ef721140c79e29430d0a5692a5c176db0061e6) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* buildhistory_analysis: fix error when comparing image contentsPaul Eggleton2013-11-181-1/+1
| | | | | | | | | | | OE-Core commit b7de1eaac9eed559b2d68058f5de67de74a6cb58 added an extra argument to the compare_dict_blobs() function but missed adding the argument to one call to compare two versions of the image-info.txt file. (From OE-Core rev: 24a45d752c3e3d0d8b59c040355e4fe7de22b041) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oe/path: Fixup handling of .* files in top level paths for ↵Richard Purdie2013-11-121-3/+1
| | | | | | | | | | | | copyhardlinktree() Files named .* in the top level of directories handled by this function were getting lost after the directory copying command was fixed. Rather than complicate the function further, use cpio instead. (From OE-Core rev: 59612905e9bb865762667aa7b3cb06e53c3a4071) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oe/path: Fix performance issue got copyhardlinktree()Richard Purdie2013-11-121-1/+1
| | | | | | | | | | | | | | With the directory copy was added to avoid race issues, it wasn't noticed that tar was recursing the directories and copying files too. This is completely crazy when we hardlink those files in the next command. Resolve the issue by telling tar not to recurse. This gives a significant performance boost to various parts of the system (do_package for linux-yocto 256s -> 178s for example). (From OE-Core rev: 8b90ed084d59b4e07aa547255d327b25cfb2ee2b) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/utils: sshcontrol: make timeout depend on outputStefan Stanacar2013-11-081-14/+27
| | | | | | | | | | | | | Instead of running the commands with a fixed timeout, we should kill the command if there is no output for timeout seconds. Also changed some strings/comments. (From OE-Core rev: beea86fa9637fd629719980e14beea758847b8f3) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oe/sstatesig: Ensure packagegroups don't continually rebuildRichard Purdie2013-11-081-0/+7
| | | | | | | | | | | | | packagegroups are allarch and shouldn't change depending on the target or machine selected. In general they should have good stable namespaces for their dependencies. As such we can exclude them from rebuilding when dependency checksums change. (From OE-Core rev: 80b065ff46322ec0cad039dfd9eb2d010168dba6) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa: add oeTest superclassStefan Stanacar2013-11-052-24/+26
| | | | | | | | | | | | | | Add oeTest superclass, make oeRuntimeTest inherit that and make the necesarry adjustments. Tests in lib/oeqa/runtime don't change, they still inherit oeRuntimeTest. We should do this because oetest.py in the future can be a base module for more stuff than oeRuntimeTest. (From OE-Core rev: cd4ed41a070bd52c446ac3df8337f17ab9421145) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* buildhistory-diff: add ability to report version changesPaul Eggleton2013-10-261-19/+22
| | | | | | | | | | | | | | | | Add a -v/--report-ver option to report changes in PKGE/PKGV/PKGR even if the value is the same as the default from PE/PV/PR. Also add a -a/--report-all option to report all changes instead of just the default significant ones. Addresses [YOCTO #5263]. (From OE-Core rev: b7de1eaac9eed559b2d68058f5de67de74a6cb58) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: build kernel module on target testStefan Stanacar2013-10-183-0/+60
| | | | | | | | | | Builds a simple Hello World module on target. Added to the defaults for core-image-sato-sdk. (From OE-Core rev: c61c3dee162aa1f5bf31b2a09d8b916dc1712056) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oe/path: Fix copytree functions for tar 1.27Richard Purdie2013-10-141-2/+2
| | | | | | | | | | | | | tar version 1.27 returns: tar: --same-order option cannot be used with -c with the commandlines we have been using. We can remove the -s option (which is --same-order) to remove the error. (From OE-Core rev: 69c26e795c117aabfaf313abbfd10e70ede633d9) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: ping: wait for 5 echo repliesStefan Stanacar2013-09-261-4/+7
| | | | | | | | | | | | | Instead of considering that ping test passed after 1 reply, wait for at least 5 consecutive replies in 60 seconds (which should be enough time for connman to reconfigure the interface in systemd images and help with the fake ssh/tests fails.) (From OE-Core rev: 6fd19a9df0ad25b2822f12e2c3a97f1b71068d4e) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: cleanup and improve output readability for some testsStefan Stanacar2013-09-223-14/+9
| | | | | | | | | | | | | | | | | | - move everything in the same test. setUp/tearDown aren't quite the right thing here, everything it's part of the same test. (and it get's confusing when ssh fails) ldd: - change test name and add output to error message vnc: - remove unnecessary check as there is no point in doing both ps and netstat. Also improve error output a bit. (From OE-Core rev: 2f91bb438cfcdd0a40daed5902b6e98fc0aee67f) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/utils: sshcontrol: log how long the last command takeStefan Stanacar2013-09-221-3/+6
| | | | | | | | | It might be useful for debugging to have in the ssh log the number of seconds a command has run. (From OE-Core rev: 48b9e45b9716130b015ae2ab7398d6aa243933dc) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* qemurunner: disable grabs in automated testingRoss Burton2013-09-181-0/+3
| | | | | | | | | | | | | Use the new QEMU_DONT_GRAB environment variable to disable grabs, finally/hopefully solving the random hangs that the autobuilder has been hitting for a while. [ YOCTO #5131 ] (From OE-Core rev: 32f9575a565f350649264c11eceba8311584b0fd) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/smart: Increase timeout to 1500 testSaul Wold2013-09-171-1/+1
| | | | | | | (From OE-Core rev: a99edb5552839fd50326dd3aa4ee2f36f6026882) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: timeout increasesStefan Stanacar2013-09-142-2/+2
| | | | | | | | | | | Increase the timeout for smart commands as under load for qemumips it's still to small. Also give ping more time fixing a potential timeout for sato systemd. (From OE-Core rev: daa3ad5807f6fc0d15b9310937d07a16edac6d22) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake.conf/package: Collapse PKGDATA_DIR into a single machine specific ↵Richard Purdie2013-09-141-31/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | directory Currently we have a hierarchy of pkgdata directories and the code has to put together a search path and look through each in turn until it finds the data it needs. This has lead to a number of hardcoded paths and file globing which is unpredictable and undesirable. Worse, certain tricks that should be easy like a GL specific package architecture become problematic with the curretn search paths. With the modern sstate code, we can do better and construct a single pkgdata directory for each machine in just the same way as we do for the sysroot. This is already tried and well tested. With such a single directory, all the code that iterated through multiple pkgdata directories and simply be removed and give a significant simplification of the code. Even existing build directories adapt to the change well since the package contents doesn't change, just the location they're installed to and the stamp for them. The only complication is the we need a different shlibs directory for each multilib. These are only used by package.bbclass and the simple fix is to add MLPREFIX to the shlib directory name. This means the multilib packages will repackage and the sstate checksum will change but an existing build directory will adapt to the changes safely. It is close to release however I believe the benefits this patch give us are worth consideration for inclusion and give us more options for dealing with problems like the GL one. It also sets the ground work well for shlibs improvements in 1.6. (From OE-Core rev: 1b8e4abd2d9c0901d38d89d0f944fe1ffd019379) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake.conf: include machine name in DEPLOY_DIR_IMAGEPaul Eggleton2013-09-141-1/+7
| | | | | | | | | | | | | | | | | | | This allows a clean seperation between image outputs from different machines, and makes it possible to have convenience symlinks to make the output ready to deploy. This did require some surgery in runqemu; if explicit paths to the image and kernel are not supplied then DEPLOY_DIR_IMAGE needs to be determined from bitbake or set in the environment. However the script does try to avoid requiring it unless it really is needed. Corresponding changes were made in the automated testing code as well. Based on an RFC patch by Koen Kooi <koen@dominion.thruhere.net> (From OE-Core rev: 7e90261aec61f79680b5eaeaf5b18c7b795412a4) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: smart: limit channel add to useful onesStefan Stanacar2013-09-111-1/+3
| | | | | | | | | | | Don't add inappropiate channels on the target. This happens when building two different machines in the same dir and then running the tests for each machine. (From OE-Core rev: 9e4e475b598f6b9bd2b653c72a1c1d5bd5c0b8c9) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/qemurunner: Use a timeout in select() callRichard Purdie2013-09-061-1/+1
| | | | | | | | | | | | | | | | | | | | A 0 value to select.select() immediately returns with no timeout. This was pegging the cpu at 100% for the python process which was bad and may be contributing to some of the timeout problems. Profile from -P of a core-image-minimal before: 97526792 function calls (97525652 primitive calls) in 45.189 seconds and after: 50204 function calls (49064 primitive calls) in 17.318 seconds Saving 97.5 million function calls has to be good :) (From OE-Core rev: c0551436974d179df23418567f18a082830380f6) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: add basic scanelf testStefan Stanacar2013-09-061-0/+26
| | | | | | | | | | | This uses scanelf from the pax-utils package and scans the binaries in PATH for TEXTREL and RPATH information. For a sato image with pax-utils installed it shows no output (which is good). (From OE-Core rev: 629099ad66f5fa2814e5f7908b426149e8978e43) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/scp: replace dd callMihai Lindner2013-09-061-10/+9
| | | | | | | | | | | Use a file object to generate a our test file instead of calling `dd`; removes dd's output from testimage.log, keeps unittest output clean. Also remove unused imports. (From OE-Core rev: 6ac48ffbab29a37b0eada533191878aeae3c91f0) Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/utils/sshcontrol: tweak ssh optionsMihai Lindner2013-09-061-11/+12
| | | | | | | | | | | | Add ssh_options to be used, the same, by ssh and scp: Decrease LogLevel to ERROR, to suppress warnings (e.g. ssh host verifications, two warnings in case of having openssh with hpn patches); We no longer presume that the first line is a warning. (From OE-Core rev: 1f18d04eec03e586134b6d77ca1c6151c22353dd) Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/oetest: oeRuntimeTest: enable long messagesMihai Lindner2013-09-062-2/+2
| | | | | | | | | | Set longMessage to True for all tests derived from oeRuntimeTest, in order to have somewhat info on assertions with cryptic or no messages. (From OE-Core rev: e5196ebd6c652431a3b80cdc9f60b752401314f4) Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: smart: serve repo on host ip only and increase timeoutStefan Stanacar2013-09-032-4/+5
| | | | | | | | | | | Don't start the http server on 0.0.0.0, listen on host ip (end of tap interface) only. Also use the timeout option (default is 300s for ssh commands) for all the commands run in this module (mostly because smart update timeouts on mips). (From OE-Core rev: 8c272641ef3e8410f331ca4133d28dea8f36e4f4) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta: Don't use deprecated bitbake APIRichard Purdie2013-09-011-1/+1
| | | | | | | | | | These have been deprecated for a long time, convert the remaining references to the correct modules and prepare for removal of the compatibility support from bitbake. (From OE-Core rev: 6a39835af2b2b3c7797fe05479341d71a3f3aaf6) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: ping: fix ping false failStefan Stanacar2013-08-301-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We run the ping test as soon as we reach the login prompt. But sometimes (seen in sato systemd) we end up with link down/link up stuff like: qemux86-64 login: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready The logic behind ping -w 30 -c 1 was to wait at most 30 seconds for at least one reply, but there is a catch: reply doesn't seems to be echo reply but any reply (non-reply means loss not network error) ping's man page: -w deadline Specify a timeout, in seconds, before ping exits regardless of how many packets have been sent or received. In this case ping does not stop after count packet are sent, it waits either for deadline expire or until count probes are answered or for some error notification from network. Just when the link up/link down happens ping returns: From 192.168.7.1 icmp_seq=1 Destination Host Unreachable --- 192.168.7.2 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms and exits sooner than the 30 seconds timeout. This patch should do what was originally intended (wait at most 30 seconds for at least one reply). (From OE-Core rev: 56d144fd22d37189e49cdf3032afb00f0be469c6) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: syslog: fix test for logger in case of systemdStefan Stanacar2013-08-301-1/+1
| | | | | | | | | | | Recently syslog behaviour changed for systemd images (log it's in a buffer not in /var/log/messages), account for the new stuff. (From OE-Core rev: 32576c4cc1621fa3013eac66c7caaa1e1fd14995) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/utils: qemurunner: fix when runqemu errors outStefan Stanacar2013-08-301-2/+2
| | | | | | | | | | | | | When qemu doesn't start or runqemu errors out (some wrong option passed or sudo needs a password for setting tap) we want to display the output but oe-core commit 9de7fe11967576f4a8b24e653c6b9a02e5f6d85b/ poky commit 51588936d4a8cde3c9bb05800240c0a0f5dedf8d changed the kill method and broke this code, so let's fix it. (From OE-Core rev: 923d4bd548911caa0b419c10905895af1e8e7026) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa: move skeletoninit.py where it belongsStefan Stanacar2013-08-301-0/+0
| | | | | | | | | | | | | OE-core commit fcc59cbcdb1550489d372edf9f465efa7165245f / poky commit 748ddc39e56623f4e48987f0467f4722f6e162f2 added a new test, but in the wrong location. I took the patch from Alex's branch but renamed it from meta/lib/oeqa/runtime/skeleton.py to meta/lib/oeqa/skeletoninit.py before sending. This was unintentional, it should have been under meta/lib/oeqa/runtime. (From OE-Core rev: f12c346ef48cb44be2e356e4cf4f28d015c3f507) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/testimage: add support for finding tests in other layers1.5_M4.rc1Stefan Stanacar2013-08-281-0/+3
| | | | | | | | | | | | | A layer can add tests in lib/oeqa/runtime (provided it extends BBPATH as normal) and enable them with TEST_SUITES_append = " testname". Test module names shouldn't collide though. (From OE-Core rev: e1e347a2d509303e1c566450b0f2b485d3d6629f) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: remove some unnecessary checks from setUpModuleStefan Stanacar2013-08-284-8/+1
| | | | | | | | | | | | | | These checks are unnecessary. setUpModule is run when a module is loaded and we shouldn't run commands on the target here, (plus if ssh doesn't work we error out in setup multiple times, instead of skipping the real test, which might depend on test_ssh). (From OE-Core rev: 188acd0a75e188fd7c0d2979acaf13fd18b12106) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: smart: add checks for smart outputStefan Stanacar2013-08-261-5/+5
| | | | | | | | | | | | | | | | | | | | | Sometimes smart throws: Committing transaction... Preparing... ######################################## [ 0%] 1:Removing psplash-default ######################################## [100%] error: Couldn't fork %postun: Cannot allocate memory and returns a 0 exit code (it thinks it succesfully removed the package, when in reality it didn't), so we need to catch those specifically. Also, sometimes output from download command is: Saving cache...http://192.168.7.1:49456/rpm/x86_64_x32/psplash-default-0.1+git0+afd4e228c6-r15.x86_64_x32.rpm and that tricks our smart download test, so use a regex there. (From OE-Core rev: 2ac7783e04f5e8e6005f967e1a6dd65d2fc6a19a) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: multilib: fix typoStefan Stanacar2013-08-261-1/+1
| | | | | | | | | | The check was obviously wrong and it surfaced with the recent change in behaviour for skipping tests. (From OE-Core rev: 4a14535cd493cb2bdd46b2a5f2a1cd2b38161f0a) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa: change behaviour for unskippable testsStefan Stanacar2013-08-261-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a test module wants to be skipped because it doesn't apply to the image but it was nevertheless a required test (one in TEST_SUITES), we issued an warning that it was a required test and went on with running the module. Usually all tests in the module failed (e.g gcc tests on a non-sdk image), but this allowed us to know that something went wrong with the image (some package/feature didn't make it). However, instead of just issuing an warning and running the tests it's better to throw an exception. The traceback will tell us what's wrong, and we don't run every single test method. Output will look like this: --snip-- | NOTE: Test modules ['oeqa.runtime.ping', 'oeqa.runtime.ssh', 'oeqa.runtime.gcc'] | NOTE: Found 5 tests | test_ping (oeqa.runtime.ping.PingTest) ... ok | test_ssh (oeqa.runtime.ssh.SshTest) ... ok | ERROR | | ====================================================================== | ERROR: setUpModule (oeqa.runtime.gcc) | ---------------------------------------------------------------------- | Traceback (most recent call last): | File "/mnt/back/yocto/poky/meta/lib/oeqa/runtime/gcc.py", line 8, in setUpModule | skipModule("Image doesn't have tools-sdk in IMAGE_FEATURES") | File "/mnt/back/yocto/poky/meta/lib/oeqa/oetest.py", line 108, in skipModule | "\nor the image really doesn't have the requred feature/package when it should." % (modname, reason)) | Exception: | Test gcc wants to be skipped. | Reason is: Image doesn't have tools-sdk in IMAGE_FEATURES | Test was required in TEST_SUITES, so either the condition for skipping is wrong | or the image really doesn't have the requred feature/package when it should. | | ---------------------------------------------------------------------- | Ran 2 tests in 1.036s | | FAILED (errors=1) | NOTE: Sending SIGTERM to runqemu --snip-- (From OE-Core rev: fd51cecf8b258d9f839a0ecebde69d09f75dc468) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: add iptables, cvs and sudoku projects build tests on targetMihai Prica2013-08-263-0/+93
| | | | | | | | | | | Downloads iptables/cvs/sudoku-savant sources and builds them on target. (From OE-Core rev: df4568205c3a7e0b20c6299e29f96bd30560146b) Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/utils: targetbuild: Add helper class for building packages on targetMihai Prica2013-08-261-0/+63
| | | | | | | | | | | | This class can be used for test cases that configure and build packages on target. (From OE-Core rev: 4b15e82c4fcb0c40b0e316ef2050944eee4418ef) Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa: make it possible to restart the targetStefan Stanacar2013-08-262-7/+28
| | | | | | | | | | | | | Tweak QemuRunner so we can actually restart the qemu target in a test (if we want more memory for example). Also add a restart method to the base test class so that tests can use it. (From OE-Core rev: 9de7fe11967576f4a8b24e653c6b9a02e5f6d85b) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: smart: add new smart testsMihai Lindner2013-08-261-11/+91
| | | | | | | | | | | | Add class to be inherited by smart tests, along with more basic tests and tests using a rpm repository. (From OE-Core rev: f6186b4204dcc421b4e616774315c8a2a77fb5c5) Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/utils: decorators: return the decorated methodMihai Lindner2013-08-261-3/+3
| | | | | | | | | | | Decorators should return whatever the decorated methods return. (From OE-Core rev: c92513d6ff3f8f06d937a5cdf4d94708f27c3850) Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/utils: qemurunner: save host IP addressMihai Lindner2013-08-261-8/+3
| | | | | | | | | | | | | | Save host IP address to host_ip. Read /proc/PID/cmdline on host to look for IPs of target and host; instead of running 'ps'. Also removed some extra empty lines from file. (From OE-Core rev: 1fcf10db10fa36430e37c95c9fee27197e73f7a5) Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/utils: new file: httpserver.py useful for serving files over HTTP ↵Mihai Lindner2013-08-261-0/+32
| | | | | | | | | | | | | to the target It can be used by smart repo/channel tests to serve deploy_dir. (From OE-Core rev: e38e18d6923cc3db50b56fa3fc64081fe4aa8669) Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-05-21 12:25:34 +0000