summaryrefslogtreecommitdiffstats
path: root/meta/lib/oeqa/runtime
Commit message (Collapse)AuthorAgeFilesLines
* lib/oeqa: add a test target controller for EFI targetsStefan Stanacar2014-03-311-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The purpose of this module is to deploy a test image on a EFI-enabled hardware and run our runtime tests. A bit of background: - testimage.bbclass uses the concept of TEST_TARGET which is a class name that is responsible for target deploying. A layer can provide it's own TEST_TARGET. Right now has OE-core has a QemuTarget and a SimpleRemoteTarget (ssh into an already up and running machine and run tests), the default one being qemu. - basically testimage does something like: target.deploy() try: target.start() runTests() finally: target.stop() This module assumes a running EFI machine with gummiboot as bootloader and core-image-testmaster installed (or similar). Also your hardware under test has to be in a DHCP-enabled network that gives it the same IP for each reboot. One time setup (master image): - build core-image-testmaster with EFI_PROVIDER = "gummiboot" - install the image on the target Test image setup: - build your test image, e.g core-image-sato as you usually do, but with these in local.conf: IMAGE_FSTYPES += "tar.gz" - Now run the tests: INHERIT += "testimage" TEST_TARGET = "GummibootTarget" TEST_TARGET_IP = "192.168.2.3" bitbake core-image-sato -c testimage Other notes: - TEST_POWERCONTROL_CMD (togheter with TEST_POWERCONTROL_EXTRA_ARGS) can be a command that runs on the host and does power cycling. The test code passes one argument to that command: off, on or cycle (off then on). In my case I use something like TEST_POWERCONTROL_CMD="powercontrol.exp test 10.11.12.1 nuc1" in local.conf. Basically my expect script does: 'ssh test@10.11.12.1 "pyctl nuc1 <arg>" and runs a python script there that controls power for a label called nuc1'. The reason why my expect script has to ssh into another machine is because of network topology, and that machine is the one actually connected to the test rack and the power strip. That's why TEST_POWERCONTROL_CMD and _ARGS need to be customized for one's setup, the only requirement being that it accepts: on/off/cycle as the last argument. - if no command is defined it would use classic reboot. This is fine as long as the machine actually reboots (as in the ssh test hasn't failed), but it's useful for "simple-setup-with-one-board-on-the-desk" scenario, where some manual interaction is okay from time to time. [YOCTO #5614] (From OE-Core rev: e00f888a88d0851b088c232dec66418e575a2e90) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/dmesg: Ignore DMA timeout errorsRichard Purdie2014-03-021-1/+1
| | | | | | | | | We see these from qemu images on servers under load. They're not interesting and clutter the build output so lets ignore them. (From OE-Core rev: 053eba4885ab4016f7efc7899ec9e02df3384d11) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime: smart: don't run in auto mode when rpm is not the pmStefan Stanacar2014-02-131-0/+2
| | | | | | | | | | TEST_SUITES = "auto" would run smart tests even for non-rpm images, which is pointless. (From OE-Core rev: 1913f38d79a56f7d21999b6839835f967ca28abd) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/utils: targetbuild: take proxy into accountStefan Stanacar2014-02-113-3/+3
| | | | | | | | | | A previous commit broke downloads when proxies are involved, let's fix it. (From OE-Core rev: 97e263b99cbe8184a74f80738fd471cfdef29e0c) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/systemd: remove race in settle()Ross Burton2014-02-041-14/+8
| | | | | | | | | | | | The settle() function had a race where services could still be activating at two minutes but then when the final log is output, they've activated. Remove this race and generally clean up the code. (From OE-Core rev: 8d107e0a828868702cfe035104c1f0b51da4291e) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime: syslog: update --help testStefan Stanacar2014-02-021-1/+1
| | | | | | | | | | | | | | | busybox 1.22 now returns exitcode 0 instead of 1 for --help options, so this test needs to be updated when busybox gets upgraded to 1.22. https://bugs.busybox.net/show_bug.cgi?id=5612 http://git.busybox.net/busybox/commit/?id=efd0698f74caab0a0c8a51228b923ee142e8e278 (From OE-Core rev: 1e560d234b6d3040a7a9f0eb023f1e4a654be1ea) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime: smart: fix adding channelsStefan Stanacar2014-01-291-1/+1
| | | | | | | | | | Without this it won't add core2-64 and similar channels, as the directory name in deploy_dir/rpm uses _ not - as the package arch. (From OE-Core rev: 14e3a8f58e309121760fec70619633281dd9d88c) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime: drop restartTarget methodStefan Stanacar2014-01-293-6/+0
| | | | | | | | | | | | | | | Restart is a property of a specific target, not of a test class, should a test really need to restart the target the direct method should be called. Also some tests used this to enforce more ram, which makes sense only for qemu targets only (and the inital reason this was needed isn't valid anymore, qemu machines had the default ram size bumped a while ago). (From OE-Core rev: 333a4326082e500bdbcd323af37e183e74adf617) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime: rpm: fix finding the test rpm fileStefan Stanacar2014-01-281-5/+6
| | | | | | | | | | | | | | Translate TUNE_PKGARCH to find the right file (this used to work because tune for qemux86-64 used to be x86_64 now it's core2-64) Also, while using packagedata was nice, it's harder to make the test exportable and runnable outside of the build system. (where oe.packagedata isn't available) (From OE-Core rev: fd0e9ad4d295ca11b33c3e3e11069421dee834e8) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/systemd: wait for services to start/failRoss Burton2014-01-141-0/+28
| | | | | | | | | | | | When checking that no services have failed to start, actually wait for services to finish starting by waiting for there not be no units in the "activating" state. (From OE-Core rev: 4d6422a84eba005a6fd788ce18c9dd42b079e2a8) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: add test for pythonTing Wang2014-01-062-0/+39
| | | | | | | | | | | Run a python script on the target 1)checks the output. 2)Call os.system method create a testfile (From OE-Core rev: 4465c9368b0c37a3a2c41b68f65de08690a8179b) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: rewrite the systemd test moduleStefan Stanacar2013-12-201-48/+45
| | | | | | | | | | | | | | They are basically the same tests but: - they look cleaner, using one single method / assert - output from unittest will be cleaner (and includes a verbose status when needed) - they are better grouped and use a real, active, enabled service (machineid will be dropped and hostnamed was a static service) (From OE-Core rev: 0aa5b97f9e0d8941ce342e9f162dd3b19d4b49bb) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: systemd failure case improvementsRoss Burton2013-12-141-3/+7
| | | | | | | | | | | If the hostnamed service can't be started or stopped, show the output from systemctl status to assist debugging. (From OE-Core rev: 024cc1cee3a9954272ecbbff1ba7153725c56dce) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: output more logging from systemd when services have failedRoss Burton2013-12-051-1/+3
| | | | | | | | | | If some services have failed to start, get the status of them and some of their log to help debug the problem. (From OE-Core rev: e371765431be25b81dbdb385233e3db5851e59d0) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: print connman status if connman failed to startRoss Burton2013-12-051-1/+10
| | | | | | | | | | If connman isn't running and we're running under systemd, use systemctl to get the state according to systemd and the end of the connman log. (From OE-Core rev: e77bcc8e4baf11701b105d071a979a21a2a303d5) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* testimage: use the new targetcontrol.py module for running testsStefan Stanacar2013-12-032-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes the necessary changes for using the targetcontrol.py module so that one can run the same tests on a qemu instance or a remote machine based on the value of TEST_TARGET variable: "qemu" or "simpleremote". The default value is "qemu" which starts a qemu instance and it's the with what we currently have. With "simpleremote", the remote machine must be up with network and ssh and you need to set TEST_TARGET_IP with the IP address of the remote machine (it can still be a qemu instance that was manually started). Basically testimage.bbclass now does something along the lines of: - load tests -> deploy (prepare) / start target -> run tests. There were a couple of changes necessary for tests and also some cleanups/renames that were needed to adjust this change. (use ip everywhere when refering to target and server_ip when refering to host/build machine) Also two unnecessary and unsed methods were dropped from sshcontrol. [ YOCTO #5554 ] (From OE-Core rev: a7820350fa3271d78ed7476e02f4aef593be1125) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/connman: disable unique testRoss Burton2013-11-221-8/+0
| | | | | | | | | | | | | | | | | | | | The connman unique test starts another instance of connmand and then does a ps to verify that there's only one of these running, on the assumption that the new one has quit because there's already one running (started by init). However, connmand is forking into the background straight away so there's a race between running ps and the second connmand discovering the first and exiting. This race can be seen because the test displays the output of ps, and by the time that second ps has been executed the new connmand has exited. This is a classic race condition and on a heavily loaded autobuilder inserting an arbitrary sleep isn't wise. In the scheme of things this test isn't very useful, so delete it. (From OE-Core rev: 80ef721140c79e29430d0a5692a5c176db0061e6) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: build kernel module on target testStefan Stanacar2013-10-183-0/+60
| | | | | | | | | | Builds a simple Hello World module on target. Added to the defaults for core-image-sato-sdk. (From OE-Core rev: c61c3dee162aa1f5bf31b2a09d8b916dc1712056) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: ping: wait for 5 echo repliesStefan Stanacar2013-09-261-4/+7
| | | | | | | | | | | | | Instead of considering that ping test passed after 1 reply, wait for at least 5 consecutive replies in 60 seconds (which should be enough time for connman to reconfigure the interface in systemd images and help with the fake ssh/tests fails.) (From OE-Core rev: 6fd19a9df0ad25b2822f12e2c3a97f1b71068d4e) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: cleanup and improve output readability for some testsStefan Stanacar2013-09-223-14/+9
| | | | | | | | | | | | | | | | | | - move everything in the same test. setUp/tearDown aren't quite the right thing here, everything it's part of the same test. (and it get's confusing when ssh fails) ldd: - change test name and add output to error message vnc: - remove unnecessary check as there is no point in doing both ps and netstat. Also improve error output a bit. (From OE-Core rev: 2f91bb438cfcdd0a40daed5902b6e98fc0aee67f) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/smart: Increase timeout to 1500 testSaul Wold2013-09-171-1/+1
| | | | | | | (From OE-Core rev: a99edb5552839fd50326dd3aa4ee2f36f6026882) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: timeout increasesStefan Stanacar2013-09-142-2/+2
| | | | | | | | | | | Increase the timeout for smart commands as under load for qemumips it's still to small. Also give ping more time fixing a potential timeout for sato systemd. (From OE-Core rev: daa3ad5807f6fc0d15b9310937d07a16edac6d22) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: smart: limit channel add to useful onesStefan Stanacar2013-09-111-1/+3
| | | | | | | | | | | Don't add inappropiate channels on the target. This happens when building two different machines in the same dir and then running the tests for each machine. (From OE-Core rev: 9e4e475b598f6b9bd2b653c72a1c1d5bd5c0b8c9) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: add basic scanelf testStefan Stanacar2013-09-061-0/+26
| | | | | | | | | | | This uses scanelf from the pax-utils package and scans the binaries in PATH for TEXTREL and RPATH information. For a sato image with pax-utils installed it shows no output (which is good). (From OE-Core rev: 629099ad66f5fa2814e5f7908b426149e8978e43) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/scp: replace dd callMihai Lindner2013-09-061-10/+9
| | | | | | | | | | | Use a file object to generate a our test file instead of calling `dd`; removes dd's output from testimage.log, keeps unittest output clean. Also remove unused imports. (From OE-Core rev: 6ac48ffbab29a37b0eada533191878aeae3c91f0) Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/oetest: oeRuntimeTest: enable long messagesMihai Lindner2013-09-061-2/+0
| | | | | | | | | | Set longMessage to True for all tests derived from oeRuntimeTest, in order to have somewhat info on assertions with cryptic or no messages. (From OE-Core rev: e5196ebd6c652431a3b80cdc9f60b752401314f4) Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: smart: serve repo on host ip only and increase timeoutStefan Stanacar2013-09-031-2/+2
| | | | | | | | | | | Don't start the http server on 0.0.0.0, listen on host ip (end of tap interface) only. Also use the timeout option (default is 300s for ssh commands) for all the commands run in this module (mostly because smart update timeouts on mips). (From OE-Core rev: 8c272641ef3e8410f331ca4133d28dea8f36e4f4) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: ping: fix ping false failStefan Stanacar2013-08-301-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We run the ping test as soon as we reach the login prompt. But sometimes (seen in sato systemd) we end up with link down/link up stuff like: qemux86-64 login: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready The logic behind ping -w 30 -c 1 was to wait at most 30 seconds for at least one reply, but there is a catch: reply doesn't seems to be echo reply but any reply (non-reply means loss not network error) ping's man page: -w deadline Specify a timeout, in seconds, before ping exits regardless of how many packets have been sent or received. In this case ping does not stop after count packet are sent, it waits either for deadline expire or until count probes are answered or for some error notification from network. Just when the link up/link down happens ping returns: From 192.168.7.1 icmp_seq=1 Destination Host Unreachable --- 192.168.7.2 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms and exits sooner than the 30 seconds timeout. This patch should do what was originally intended (wait at most 30 seconds for at least one reply). (From OE-Core rev: 56d144fd22d37189e49cdf3032afb00f0be469c6) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: syslog: fix test for logger in case of systemdStefan Stanacar2013-08-301-1/+1
| | | | | | | | | | | Recently syslog behaviour changed for systemd images (log it's in a buffer not in /var/log/messages), account for the new stuff. (From OE-Core rev: 32576c4cc1621fa3013eac66c7caaa1e1fd14995) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa: move skeletoninit.py where it belongsStefan Stanacar2013-08-301-0/+28
| | | | | | | | | | | | | OE-core commit fcc59cbcdb1550489d372edf9f465efa7165245f / poky commit 748ddc39e56623f4e48987f0467f4722f6e162f2 added a new test, but in the wrong location. I took the patch from Alex's branch but renamed it from meta/lib/oeqa/runtime/skeleton.py to meta/lib/oeqa/skeletoninit.py before sending. This was unintentional, it should have been under meta/lib/oeqa/runtime. (From OE-Core rev: f12c346ef48cb44be2e356e4cf4f28d015c3f507) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/testimage: add support for finding tests in other layers1.5_M4.rc1Stefan Stanacar2013-08-281-0/+3
| | | | | | | | | | | | | A layer can add tests in lib/oeqa/runtime (provided it extends BBPATH as normal) and enable them with TEST_SUITES_append = " testname". Test module names shouldn't collide though. (From OE-Core rev: e1e347a2d509303e1c566450b0f2b485d3d6629f) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: remove some unnecessary checks from setUpModuleStefan Stanacar2013-08-284-8/+1
| | | | | | | | | | | | | | These checks are unnecessary. setUpModule is run when a module is loaded and we shouldn't run commands on the target here, (plus if ssh doesn't work we error out in setup multiple times, instead of skipping the real test, which might depend on test_ssh). (From OE-Core rev: 188acd0a75e188fd7c0d2979acaf13fd18b12106) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: smart: add checks for smart outputStefan Stanacar2013-08-261-5/+5
| | | | | | | | | | | | | | | | | | | | | Sometimes smart throws: Committing transaction... Preparing... ######################################## [ 0%] 1:Removing psplash-default ######################################## [100%] error: Couldn't fork %postun: Cannot allocate memory and returns a 0 exit code (it thinks it succesfully removed the package, when in reality it didn't), so we need to catch those specifically. Also, sometimes output from download command is: Saving cache...http://192.168.7.1:49456/rpm/x86_64_x32/psplash-default-0.1+git0+afd4e228c6-r15.x86_64_x32.rpm and that tricks our smart download test, so use a regex there. (From OE-Core rev: 2ac7783e04f5e8e6005f967e1a6dd65d2fc6a19a) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: multilib: fix typoStefan Stanacar2013-08-261-1/+1
| | | | | | | | | | The check was obviously wrong and it surfaced with the recent change in behaviour for skipping tests. (From OE-Core rev: 4a14535cd493cb2bdd46b2a5f2a1cd2b38161f0a) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: add iptables, cvs and sudoku projects build tests on targetMihai Prica2013-08-263-0/+93
| | | | | | | | | | | Downloads iptables/cvs/sudoku-savant sources and builds them on target. (From OE-Core rev: df4568205c3a7e0b20c6299e29f96bd30560146b) Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: smart: add new smart testsMihai Lindner2013-08-261-11/+91
| | | | | | | | | | | | Add class to be inherited by smart tests, along with more basic tests and tests using a rpm repository. (From OE-Core rev: f6186b4204dcc421b4e616774315c8a2a77fb5c5) Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: rpm: add install and erase testsStefan Stanacar2013-08-261-3/+27
| | | | | | | | | | | | | | Copies to target rpm-doc file from deploy_dir and tries to install and then remove that package. rpm-doc was chosen because it's small, it only adds a few files to target, and it's almost always found in deploy_dir for images with package-management/rpm. (From OE-Core rev: a2d2f2b7b111863d3c50dedded37aab813d9634f) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: add vncserver for target testMihai Prica2013-08-261-0/+22
| | | | | | | | | (From OE-Core rev: 56bc5d717b34563ed36c0618305e4ec5080c3a27) Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: add adjust date and time testMihai Prica2013-08-261-0/+27
| | | | | | | | | (From OE-Core rev: ede300f44f1770b1e3e5c59f65cf5079379a2bc1) Signed-off-by: Mihai Prica <mihai.prica@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: add new scp testAlexandru Palalau2013-08-261-0/+22
| | | | | | | | | | | | Copies a 5MB to target using scp, more of an network test than a scp one. (From OE-Core rev: 2ec4a0686b9a91e56dfba3fa2e574c0c531508ff) Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: add new PAM support testAlexandru Palalau2013-08-261-0/+24
| | | | | | | | | | | New test which verifies some usual commands functionality with PAM support (From OE-Core rev: 06c7914e3354ff4e430a6b664f40e5a71e212761) Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: add new logrotate testAlexandru Palalau2013-08-261-0/+27
| | | | | | | | | | | | New logrotate test which verifies the log directory change in logrotate.conf. Needs an image with logrotate installed. (From OE-Core rev: 186d79a603b5cbf5a93e6f5dbba5f62ed8d4d8d8) Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: add a test for lddCornel Stoicescu2013-08-261-0/+19
| | | | | | | | | | | This test checks that at least one path in RTLDLIST exists. (From OE-Core rev: d53ffbf21a6b17f0f0537929a95a502958d82a09) Signed-off-by: Cornel Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: add test for perlCornel Stoicescu2013-08-262-0/+30
| | | | | | | | | | | This test runs a perl script on the target and checks the output. (From OE-Core rev: 95abdbf2d715c9e7e3368f5193167feb5efc6261) Signed-off-by: Cornel Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: add basic test for x32 imagesAlexandru Georgescu2013-08-261-0/+17
| | | | | | | | | | | Checks that an x86-64-x32 image has the right binaries. (From OE-Core rev: da42e38b2bc4a606b717ac302cfc77aefb1a5795) Signed-off-by: Alexandru Georgescu <alexandru.c.georgescu@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: add new systemd testsAlexandru Palalau2013-08-131-0/+35
| | | | | | | | | | | New systemd runtime tests for enable/disable service, start/stop service and list services. (From OE-Core rev: 6386dc718f85210c9b6b9f69878ec9a7847b78de) Signed-off-by: Alexandru Palalau <alexandrux.palalau@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: rework syslog testStefan Stanacar2013-08-131-7/+16
| | | | | | | | | | | | | Add separate tests for restarting syslog and using logger, and skip the configuration test for systemd images which always fail because syslog's systemd service doesn't read a config by default (see YB#4860). (From OE-Core rev: c75f3e2385dde44ee96e33f4e5d064894dfb7d52) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/runtime/xorg: use the right ps command for xorg testStefan Stanacar2013-08-031-2/+2
| | | | | | | | | | Use our determined ps command, otherwise test fails for images with procps. (From OE-Core rev: 18e4d014bea3a5748f42e6dac648fa9b02230344) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa: fix dependecy checkStefan Stanacar2013-07-161-0/+1
| | | | | | | | | | | Adds missing skip for smart test and fix the check (which I somehow broke a while ago). (From OE-Core rev: cf1790d992f067be8d5f9894458f55f6f1bdc61f) Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oeqa/runtime: add tests for syslog and dfAlexandru Palalau2013-07-162-0/+50
| | | | | | | | | | | | | | | Add tests for free space and syslog. Changed in v2: - limit df's output to / - syslog: fix restart in case of systemd (From OE-Core rev: 1b39d57e7b5c9b69d565cf4d188ebc2f14e66ae6) Signed-off-by: Alexandru Palalau <alexandru.palalau@intel.com> Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-07-03 22:40:10 +0000