summaryrefslogtreecommitdiffstats
path: root/meta/lib/oe
Commit message (Collapse)AuthorAgeFilesLines
* terminal: Add sleep in pid-monitor loopJacob Kroon2016-08-101-0/+2
| | | | | | | | | | | | Monitoring the process started by gnome-terminal was spinning in a busy-loop. Insert some sleeping so that we don't eat all the cpu. (From OE-Core rev: 314937429d700204f296cfd1c0c5f215a2e5b939) Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oe/recipeutils: fix patch_recipe*() with empty inputPaul Eggleton2016-07-261-1/+1
| | | | | | | | | | | | | | | If you supplied an empty file to patch_recipe() (or an empty list to patch_recipe_lines()) then the result was IndexError because the code checking to see if it needed to add an extra line of padding didn't check to see if there were in fact any lines before trying to access the last line. Fixes [YOCTO #9972]. (From OE-Core rev: 92a73e870478ddb2a2d137e3fff28828809bec2e) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/populate_sdk_ext: filter sstate within the extensible SDKPaul Eggleton2016-07-261-2/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the new oe-check-sstate to filter the sstate artifacts shipped with the extensible SDK by effectively running bitbake within the produced eSDK and and getting it to tell us which tasks it will restore from sstate. This has several benefits: 1) We drop the *-initial artifacts from the minimal + toolchain eSDK. This still leaves us with a reasonably large SDK for this configuration, however it does pave the way for future reductions since we are actually filtering by what will be expected to be there on install rather than hoping that whatever cuts we make will match. 2) We verify bitbake's basic operation within the eSDK, i.e. that we haven't messed up the configuration 3) We verify that the sstate artifacts we expect to be present are present (at least in the sstate cache for the build producing the eSDK). Outside deletion of sstate artifacts has been a problem up to now, and this should at least catch that earlier i.e. during the build rather than when someone tries to install the eSDK. This does add a couple of minutes to the do_populate_sdk_ext time, but it seems like the most appropriate way to handle this. Should mostly address [YOCTO #9083] and [YOCTO #9626]. (From OE-Core rev: 4b7b48fcb9b39fccf8222650c2608325df2a4507) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/populate_sdk_ext: allow including toolchain in eSDK on installPaul Eggleton2016-07-261-2/+3
| | | | | | | | | | | | | | | | | | | | | If we're to completely replace the standard SDK with the extensible SDK, we need to be able to provide the standard toolchain on install without doing anything other than installing it, so that you can install the SDK and then point your IDE at it. This is particularly applicable to the minimal SDK which normally installs nothing by default. NOTE: enabling this option currently adds ~280MB to the size of the minimal eSDK installer. If we need to reduce this further we would have to look at adjusting the dependencies and/or the sstate_depvalid() function in sstate.bbclass which eliminates dependencies, or look at reducing the size of the artifacts themselves. Implements [YOCTO #9751]. (From OE-Core rev: ed0d8ed72370df694f720cc13897493478dc1de9) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oe/path: Fix tar invocation with --no-recursionClemens Lang2016-07-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | tar's --no-recursion flag only applies to files mentioned after the flag, which made it a no-op in this invocation of tar, because it was at the end of the command line. This is simple to verify with GNU tar 1.29: | $ mkdir foo | $ mkdir foo/dir | $ touch foo/dir/file | $ tar -cf - foo --no-recursion | tar t | foo/ | foo/dir/ | foo/dir/file | $ tar -cf - --no-recursion foo | tar t | foo/ Modify the code so that it actually does what the comment says by moving the flag in front of the --files-from argument. (From OE-Core rev: d45f5e71fef5ffbd4408f69c5c179dc71a3eb452) Signed-off-by: Clemens Lang <clemens.lang@bmw-carit.de> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oe/gpg_sign: fix output in error pathsRoss Burton2016-07-261-3/+2
| | | | | | | | | | oe.utils.getstatusoutput() is a wrapper for subprocess.getstatusoutput() which uses Universal Newlines, so the output is a str() not bytes(). (From OE-Core rev: ce24d4c3632b71939ad198268a900ee823a89b27) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package_manager.py: Avoid installing an empty package listMark Hatle2016-07-211-0/+3
| | | | | | | | | | | | | | | It is possible in an attempt only install, that everything listed is not available to be installed. This will have the effect of clearing the package list. However, we only check for an empty package list at the beginning of the function. We need to also check before running the install, otherwise we can fail due to 'error: no package(s) given". (From OE-Core rev: 9ae6a2830dacb3c335754a6da91bd5cc30546b31) Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Mingli Yu <mingli.yu@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* buildhistory-diff: reduce PKGR noiseEd Bartosh2016-07-211-0/+18
| | | | | | | | | | | | | | | | | | When using PR service the buildhistory-diff output contains a lot of PKGR changes: In practice the mass of PKGR updates hide other important changes as they often account for 80% of all changes. Skipped incremental and decremental changes of PKGR versions to reduce amount of the script output. All changes are still included in the output if script is run with -a/--report-all command line option. [YOCTO #9755] (From OE-Core rev: a343788b11f6c4f92ae8d2035fe8cb54f922227e) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* image: add do_image_qa task to run QA checks on the constructed imageJoshua Lock2016-07-201-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This task runs all functions in IMAGE_QA_COMMANDS after the image construction has completed in order to validate the resulting image. Image sanity checks should either be Python functions which raise bb.build.FuncFailed on failure or shell functions with return a non-zero exit code. Python functions may instead raise an oe.utils.ImageQAFailed Exception which takes an extra argument, a description of the failure. python image_check_python_ok () { if True: raise bb.build.FuncFailed('This check always fails') else: bb.note("Nothing to see here") } image_check_shell_ok () { if true exit 1 else exit 0 fi } [YOCTO #9448] (From OE-Core rev: c9bef2ecf1a30159d11781184829f41844a58c13) Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* devtool: add finish subcommandPaul Eggleton2016-07-201-1/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | Add a subcommand which will "finish" the work on a recipe. This is effectively the same as update-recipe followed by reset, except that the destination layer is required and it will do the right thing depending on the situation - if the recipe file itself is in the workspace (e.g. as a result of devtool add), the recipe file and any associated files will be moved to the destination layer; or if the destination layer is the one containing the original recipe, the recipe will be overwritten; otherwise a bbappend will be created to apply the changes. In all cases the layer path can be loosely specified - it could be a layer name, or a partial path into a recipe. In the case of upgrades, devtool finish will also take care of deleting the old recipe. This avoids the user having to figure out the correct actions when they're done - they just do "devtool finish recipename layername" and it saves their work and then removes the recipe from the workspace. Addresses [YOCTO #8594]. (From OE-Core rev: fa550fcb9333d59b28fc0e4aebde888831410f5c) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* devtool: upgrade: record original recipe filesPaul Eggleton2016-07-201-1/+3
| | | | | | | | | | | | This provides us with the information we need to remove the original version recipe and associated files when running "devtool finish" after "devtool upgrade". (From OE-Core rev: 92eb42c347af919cd9f8739515fdf806c12b5ba8) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oe/recipeutils: fix a few issues in find_layerdir()Paul Eggleton2016-07-201-2/+4
| | | | | | | | | | | | | | * Allow the function to be called with the base layer path (in which case it will just return the same path) * Ensure that the function doesn't recurse indefinitely if it's called on a file that's not inside a layer * Correct the doc comment for accuracy (From OE-Core rev: 912026d85c2f535be2f60c45979162ea25c7f356) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oe/lib/package: handle shlibs files disappearingRoss Burton2016-07-201-1/+6
| | | | | | | | | | | | | | During a parallel build it's possible for unrelated shlib files to be removed if the recipe they came from is about to be rebuilt. They can't be involved in the dependency chains as otherwise they wouldn't be removed, so just silently handle files disappearing. [ YOCTO #8555 ] (From OE-Core rev: 1e355da3fda742c78d99ddd2ee5caa9df52f92e1) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oe/patch: handle encoding differences in patch filesPaul Eggleton2016-07-121-43/+57
| | | | | | | | | | | | | | | With Python 3, the encoding of a file is significant; several recipes in OE-Core have patches which are not fully utf-8 decodable e.g. man, lrzsz, and gstreamer1.0-libav, leading to errors when using devtool's modify, upgrade or extract subcommands on these recipes. To work around this, try reading the patch file as utf-8 first and if that fails try latin-1 before giving up. (From OE-Core rev: 7f4d7a6f51569954e204f110827a8ce256bcdc68) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* terminal: Drop gnome-terminal --disable-factory workaroundsRichard Purdie2016-07-081-8/+1
| | | | | | | | | | With the new pid monitoring code we have for recent versions of gnome-terminal we can just drop the --disable-factory code now since the other solution handles this case as well. (From OE-Core rev: ed4957c444a2982c19e2f1f96d9afb2a992c1daf) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* terminal: Fix gnome-terminal to work with recent versionsRichard Purdie2016-07-081-1/+22
| | | | | | | | | | | | | | | | | | Currently gnome-terminal just returns straight away, opening a terminal in a new separate process we have no insight into. For patch resolution, this leads to spawning many different terminal windows, for pydevshell, it just flashes a window up and then closes. We need to block until the command completes but gnome-terminal gives us no way to do this. We therefore write the pid to a file using a "phonehome" wrapper script, then monitor the pid until it exits. [YOCTO #7254] (also fixing do_devpyshell) (From OE-Core rev: 76e8ab47c936674b8bb9bf1c48de53b30f5bf74a) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oe/path: remove oe.path.check_outputRoss Burton2016-07-081-45/+4
| | | | | | | | | | This was a copy-and-paste of subprocess.check_output() from when we supported Python <2.7, so simply delete it and use subprocess.check_output() instead. (From OE-Core rev: b1f2d9ed8d4dc89c9e669f43f546463ccc2a76b9) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oe/sstatesig: print locked sigs file message only when explicitly calledPaul Eggleton2016-07-081-6/+4
| | | | | | | | | | | If we're building the extensible SDK we don't need to see the "Writing locked sigs" message; it's only necessary when the user explicitly runs bitbake -S none <target>. (From OE-Core rev: 440a351ee13920045c9d3e51882908f7b3f01d35) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/image: implement progress support for do_rootfsPaul Eggleton2016-07-081-13/+88
| | | | | | | | | | | | Use the new task progress functionality to report progress during do_rootfs. This is a little coarse and ideally we would have some progress within the installation section, but it's better than nothing. (From OE-Core rev: 370f08d434480c1790950e40db8f7687da78cb14) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oe/package_manager: keep platform_extra and default_platform_extra lists ↵Bill Randle2016-07-011-6/+7
| | | | | | | | | | | | | | | | | | ordered In RpmPM:insert_feeds_uris, the paths are kept in sets, which are unordered, but they are later used to set the priority for the Smart channels, so unexpected results could occur. Change the sets to lists and use the same code as in create_configs() to add items to the list, rather than the set operators. [YOCTO #9717] (From OE-Core rev: ce4137f4bb955207fede0c4ef338835d9a461f59) Signed-off-by: Bill Randle <william.c.randle@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package_manager.py: specify tmpdir for opkgChen Qi2016-06-231-1/+1
| | | | | | | | | | | | | | | Specify tmpdir for opkg via '-t' option so that opkg does not use the default 'TMPDIR' which usually is '/tmp' on build host. This would solve race problems like below. sh: /tmp/opkg-rOG6Tl/opkg-intercept-iPoEp5/depmod: Permission denied (From OE-Core rev: 5665e284b7e7ee071201664dc50a3412bd4ac8cd) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package_manager: Fix multilib package arch ordering issuesRichard Purdie2016-06-211-8/+4
| | | | | | | | | | | | | | | | | | | | | Order is not preserved in dict() and this code depends on the order of these lists of package architectures used when multilibs are enabled. This caused 'random' breakage where sometimes the correct order was present and sometimes it wasn't. Use collections.OrderedDict() to avoid this problem. Kudos to Bill Randle and Alejandro Hernandez who did most of the work debugging this, I simply took the problem they identified and wrote a patch to fix it. This unblocks the M1 build but this code needs auditing as there are clearly other ordering issues (e.g. the set() usage). [YOCTO #9717] (From OE-Core rev: 61a33582dfc964d612d20d34734a787d873e312c) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oe/distro_check.py: Fixes for python3Aníbal Limón2016-06-121-48/+34
| | | | | | | | | | | | | | | | | | create_socket: Use urllib because urllib2 is now urllib in python3 and proxies as argument are deprecated so export them in the environ instead. get_links_from_url: Change usage of sgmllib for parsing HTML because is deprecated in python 3, use instead bs4 that is already imported in the bitbake tree. [YOCTO #9744] (From OE-Core rev: ee26ecf58277560459dd01992bb3f486f92c1531) Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oe/terminal.py: decode bytes variable before rstrip/splitLeonardo Sandoval2016-06-121-1/+1
| | | | | | | | | | | | | On python 3, bytes variable types must be decoded if these are intended to be used as strings, otherwise we get the following error exception: TypeError: Type str doesn't support the buffer API (From OE-Core rev: b950539c911b7945d652b05616164828e711ac7f) Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oe/lib/pacakge_manager.py: Update missing pipeline decodingMariano Lopez2016-06-071-2/+2
| | | | | | | | | | | | Adds decoding needed by some commands output later used as strings. [YOCTO #9702] (From OE-Core rev: 0440b5ace411c61f802376d4e1c9eac93e72d65f) Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oe/package_manager: adapt for Python 3Ross Burton2016-06-051-2/+2
| | | | | | | | | | string.rstrip() doesn't exist in Python 3, so use the .rstrip method on the object itself instead. (From OE-Core rev: 554719e3f65e468f89a96d4869766d3ff7a8012e) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oe/buildhistory_analysis: fix for Python 3Joshua Lock2016-06-031-10/+10
| | | | | | | | | | The read method of the data_stream File object now returns bytes, not a str, so we must decode it. (From OE-Core rev: cfae302c4996c49a8754497ea9f13f8331d6975d) Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* distro_check.py: Don't mix tabs and spacesJussi Kukkonen2016-06-021-2/+2
| | | | | | | (From OE-Core rev: 6c8d1876f5a2d53fa89531e4a5f414d5d5da77be) Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* buildhistory_analysis: Convert stream data (bytes) to stringsLeonardo Sandoval2016-06-021-1/+1
| | | | | | | | | | | | | The bytes type variables are threat different as strings variables in python3, so convert bytes to strings. This was found when using the script buildhistory-diff, where the interpreter was yielding this error TypeError: Type str doesn't support the buffer API (From OE-Core rev: 3064d36186b47954eb94095217f7bb37e3fce651) Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/lib: Complete transition to python3Richard Purdie2016-06-0214-54/+47
| | | | | | | | | This patch contains all the other misc pieces of the transition to python3 which didn't make sense to be broken into individual patches. (From OE-Core rev: fcd6b38bab8517d83e1ed48eef1bca9a9a190f57) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* scripts: Fix encoding errors for python3Ed Bartosh2016-06-021-1/+4
| | | | | | | | | | | | | | Moved call of decode('utf-8') as close as possible to call of subprocess API to avoid calling it in a lot of other places. Decoded binary data to utf-8 where appropriate to fix devtool and recipetool tests in python 3 environment. (From OE-Core rev: 30d02e2aa2d42fdf76271234b2dc9f37bc46b250) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* scripts: Fix deprecated dict methods for python3Ed Bartosh2016-06-021-2/+2
| | | | | | | | | | Replaced iteritems -> items, itervalues -> values, iterkeys -> keys or 'in' (From OE-Core rev: 25d4d8274bac696a484f83d7f3ada778cf95f4d0) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/lib: Update xrange -> range for python3Richard Purdie2016-06-021-2/+2
| | | | | | | | xrange() no longer exists in python 3, use range() (From OE-Core rev: d022b4335100612d6596cc4c4956cb98ed5873cc) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/lib: Update to explictly create lists where neededRichard Purdie2016-06-0213-28/+28
| | | | | | | | | Iterators now return views, not lists in python3. Where we need lists, handle this explicitly. (From OE-Core rev: caebd862bac7eed725e0f0321bf50793671b5312) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/lib: Update to match python3 iter requirementsRichard Purdie2016-06-025-9/+9
| | | | | | | | | python3 standardises its use of iteration operations. Update the code to match the for python3 requires. (From OE-Core rev: 2476bdcbef591e951d11d57d53f1315848758571) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/lib: Update to use python3 command pipeline decodingRichard Purdie2016-06-024-51/+53
| | | | | | | | | | | In python3, strings are unicode by default. We need to encode/decode from command pipelines and other places where we interface with the real world using the correct locales. This patch updates various call sites to use the correct encoding/decodings. (From OE-Core rev: bb4685af1bffe17b3aa92a6d21398f38a44ea874) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/lib: Convert to use python3 octal syntaxRichard Purdie2016-06-023-6/+6
| | | | | | | | The syntax for octal values changed in python3, adapt to it. (From OE-Core rev: 737a095fcde773a36e0fee1f27b74aaa88062386) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oe/recipeutils: fix insertion of variable valuesPaul Eggleton2016-06-011-1/+1
| | | | | | | | | | | Add some more variables in appropriate places in recipe_progression such that the patch_recipe_* functions are able to insert variables in the right place within a recipe. (From OE-Core rev: c33ba6cc5d14b1da96f6d906836c50e0346dcf06) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oe/recipeutils: patch_recipe_lines: allow omitting trailing newlinesPaul Eggleton2016-06-011-6/+11
| | | | | | | | | | | | | | This function was assuming that what you wanted was that output lines had trailing newline characters. If you're just outputting each line verbatim to a text file then that's fine, but sometimes you start with the assumption that the lines don't have trailing newlines; thus we shouldn't allow for the possibility that the caller doesn't want them and add a parameter to control it. (From OE-Core rev: fb2bb509ff5c7bd71b41a1dcba3b1bff1d18cf5d) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oe/recipeutils: split out patch_recipe_lines()Paul Eggleton2016-06-011-5/+18
| | | | | | | | | | | Split out a function from patch_recipe_file() that takes just the lines as input so we can edit recipe lines in memory. This will be used within recipetool to ensure we insert new values in the right place. (From OE-Core rev: d780642f950fb3a9699f466a405a2710d870dd08) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oe/package_manager.py: Add pkgpath to dict returned by package_infoMariano Lopez2016-05-301-17/+24
| | | | | | | | | | | | | | Having the package path with all the other package info allows to reuse more code and have this information outside the package manager, without additional processing. [YOCTO #8536] (From OE-Core rev: 343f762792cbfccffaf3aa901289f9bb0f8cef3d) Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package_manager: no need to output Note: in bb.note() callsRoss Burton2016-05-221-8/+8
| | | | Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta: Update to modern exception syntaxRichard Purdie2016-05-213-3/+3
| | | | | | | | | Update older exception syntax to modern one required by python 3. Compatible with python 2.7. (From OE-Core rev: d13f0ac614f1d1e2ef2c8ddc71cbfcf76a8dc3f2) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta/scripts: python3: rename file -> openRichard Purdie2016-05-212-4/+4
| | | | | | | | | | | | file() API doesn't exist in python 3, convert to open(). Also handle some cases where files aren't closed. Compatible with python 2.7. [Contributions from Ed and Richard] (From OE-Core rev: 0f4ec13e11bb8abe21aba2a28547dfb9372bc377) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta/selftest/scripts: Use print function for python3 compatibilityRichard Purdie2016-05-212-2/+2
| | | | | | | | | | | | Used print function instead of print statement to make the code work in python 3. [Changes from both Ed and Richard] (From OE-Core rev: ced1995694c394d92cb82fb9c25a33dc027a3b69) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lib/oe/rootfs: Fix DEBUGFS generation, without opensslAnders Darander2016-05-201-0/+2
| | | | | | | | | | | | | | | | In commit 20ea6d274bb0a9a5addb111f32793de49b907865, debugfs generation for images using opkg, which included openssl was fixed. However, that broke the generation of the opkg-based images, that lacks openssl. The error is a python stack trace, showing that shutil.copytree tries to copy a non-existing directory. This relates to [YOCTO #9040]. (From OE-Core rev: f6b0b260ce18a30d04edfb0afb7942b9f9a5480b) Signed-off-by: Anders Darander <anders@chargestorm.se> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rootfs.py: Unify _log_check_warn() and _log_check_error()Peter Kjellerstedt2016-05-191-38/+14
| | | | | | | | | | | | | | | | | | | Use a common _log_check_common() function (based on the old _log_check_warn() function) to implement the logic for both _log_check_warn() and _log_check_error(). The main benefit of this is that now all error messages will be reported again, not just the first one found. Additionally the output will now look the same for both error and warning messages. This removes the context for the error messages. However, since there was no indication in the output that some of the lines were context, they were more confusing than helping. (From OE-Core rev: dd73dcac36b80b3b886a2e9bf575b91c4f60d039) Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rootfs.py: Reduce spam from _log_check_warn()Peter Kjellerstedt2016-05-191-2/+9
| | | | | | | | | | | | | | | | For each warning found in the log, _log_check_warn() would output a line stating that it had found a warning, then the actual warning and finally an empty line. This is quite excessive when there are many warnings in the log. With this change the output is instead a line stating how many warnings were found, followed by the warnings. This makes the output much more compact and actually much more readable. (From OE-Core rev: d6e3477749b1d09d40a773e0ac857a24d5851984) Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rootfs.py: Exclude lines in _log_check_warn() as wellPeter Kjellerstedt2016-05-191-4/+15
| | | | | | | | | | This will make _log_check_warn() exclude the same lines as _log_check_error() does. (From OE-Core rev: 85f64c68278f797c6f73f002f63d7f46fe80aef4) Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rootfs.py: Use one way to exclude lines in _log_check_error()Peter Kjellerstedt2016-05-191-13/+12
| | | | | | | | | | | | Before there were three different ways to exclude a line from being searched for error messages in _log_check_error(). Now there is only one: an array of regular expressions. This should make it easy to add more excludes if nedded. (From OE-Core rev: 321df88088fbfa657b61b2bae32751f03daec46f) Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>