summaryrefslogtreecommitdiffstats
path: root/meta/conf
Commit message (Collapse)AuthorAgeFilesLines
* bitbake.conf: require conf/multiconfig/${BB_CURRENT_MC}.confJuro Bystricky2017-01-172-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Presently there is no check to verify the existence of configuration files as listed in BBMULTICONFIG. For example, BBMULTICONFIG = "foobar" in local.conf does not trigger an error or even a warning when there is no conf/multiconfig/foobar.conf. The missing file is silently ignored. This patch changes the inclusion of all multiconfig configuration files as a non-optional requirement. If the file is missing, we get an error such as: ERROR: ParseError at /data/master-multi/poky/meta/conf/bitbake.conf:704: Could not include required file conf/multiconfig/foobar.conf Although the "default" configuration is not listed in BBMULTICONFIG, this change also requires the file multiconfig/default.conf to exist. The "default" (non-multiconfig) configuration is normally configured via local.conf, so although this file is required, it can/should be empty. This patch creates an empty file default.conf in meta/conf/multiconfig. [YOCTO#10917] (From OE-Core rev: ca46c09d38b766b69f485f1e82fc78f2a5e6a4c8) Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gcc6: Upgrade to 6.3.0Khem Raj2017-01-091-1/+1
| | | | | | | | | | 6.3.0 is a bugfix release in gcc 6 series (From OE-Core rev: 36ffcd1d7d2ab9dcc91e9c09623a6613a248bc69) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gummiboot: Remove/change gummiboot references with systemd-bootAlejandro Hernandez2017-01-091-1/+1
| | | | | | | | | | | | | | | After systemd-boot was introduced, its been tested for a while with no major issues being found until now, this patch completely replaces all gummiboot instances with systemd-boot ones, taking the next step into cleaning up systemd-boot/gummiboot. [YOCTO #10332] (From OE-Core rev: f9a61d3400ad9068a6d83b8eb6aefe3098c58e68) Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta/scripts: Various getVar/getVarFlag expansion parameter fixesRichard Purdie2017-01-092-2/+2
| | | | | | | | | | | | | | | | | There were a few straggling expansion parameter removals left for getVar/getVarFlag where the odd whitespace meant they were missed on previous passes. There were also some plain broken ussages such as: d.getVar('ALTERNATIVE_TARGET', old_name, True) path = d.getVar('PATH', d, True) d.getVar('IMAGE_ROOTFS', 'True') which I've corrected (they happend to work by luck). (From OE-Core rev: 688f7a64917a5ce5cbe12f8e5da4d47e265d240f) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake.conf: Add inclusion of BB_CURRENT_MC.conf after local.confRichard Purdie2016-12-221-0/+1
| | | | | | | | | | | | | People are strugling with multiconfig as the up front inclusion of the configuration file doesn't do what people expect. The only way to meet user expectations is to include the file immediately after local.conf. We add BB_CURRENT_MC to bitbake so that the metadata can determine when to include the extra configuration. (From OE-Core rev: a6a3894fb2cb2097d2404b8b8cb2b85df595cfa9) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* arch-mips: Add MIPS 64r6 N32 tuneZubair Lutfullah Kakakhel2016-12-221-0/+26
| | | | | | | | | | Add MIPS64R6-n32 tuning options. (From OE-Core rev: e723dbb9614f7d7e7e158bc9afd0b2bfac0fbee2) Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gdb: Upgrade to 7.12Khem Raj2016-12-201-1/+1
| | | | | | | | (From OE-Core rev: 59338b0bc2f8a5fe929d906769f5518ec67d6f3f) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: wic: qemux86: use weak assignment for WKS_FILEMaciej Borzecki2016-12-161-1/+1
| | | | | | | | | | | | | | | A follow-up of a fix introduced in 1b32c6ed025745cb06b7c28ca0fe9e416ce7abfa (selftest: wic: fix test_qemu). Wic test_qemu fails on qemux86 due to a direct assignment of WKS_FILE in machine configuration. Using default assignment allows WKS_FILE to be overwritten in test setup. (From OE-Core rev: 9afaeadb37b2b2fab935755ab570cf4b1f3195f4) Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta: remove True option to getVar callsJoshua Lock2016-12-169-35/+35
| | | | | | | | | | | | | getVar() now defaults to expanding by default, thus remove the True option from getVar() calls with a regex search and replace. Search made with the following regex: getVar ?\(( ?[^,()]*), True\) (From OE-Core rev: 7c552996597faaee2fbee185b250c0ee30ea3b5f) Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Use weak assignment for SERIAL_CONSOLES in qemu configuration filesChen Qi2016-12-137-7/+7
| | | | | | | | | | | | | | | | | Use weak assignment for SERIAL_CONSOLES in qemu configuration files so that the value could serve as a default value and could be easily overridden in configuration files like local.conf. When using the default value for SERIAL_CONSOLES in qemux86-64,we would have annoying messages on console complaining about respawning getty on ttyS1. Although the value is set by purpose, at least we need to provide an easy way to override it. (From OE-Core rev: 5f060b66162c41a295995947b918253450870117) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* selftest: wic: fix test_qemuEd Bartosh2016-12-071-1/+1
| | | | | | | | | | | | | | | | Setting WKS_FILE variable in qemux86-64 made wic test to use wrong wks file to produce an image and resulted in test_qemu failure. Used conditional assignment in qemux86-64 and explicitly set WKS_FILE in wic testing suite to make the suite to use wic-image-minimal.wsk. This should fix test_qemu failure. (From OE-Core rev: 3bca4d18c2712e3b154bacfb917f0a749ebaddeb) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* arch-mips: sort new MACHINEOVERRIDES by priorityAndré Draszik2016-12-071-8/+8
| | | | | | | | | | | | | While I couldn't find explicit documentation, it appears that the list of MACHINEOVERRIDES should be sorted from less specific to more specific left to right, so that more specific overrides take precedence. (From OE-Core rev: 59c724db5628775e77fa090183897c6ae0fdf9a8) Signed-off-by: André Draszik <adraszik@tycoint.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* tune-cortexa*.inc: squash whitespace within TUNE_FEATURES stringsAndre McCurdy2016-12-076-90/+90
| | | | | | | | | | | | | | | | | TUNE_FEATURES is include in BUILDCFG_VARS, so any whitespace is visible to the user during the build process. Remove the extra whitespace added during the 2.1 development cycle: http://git.openembedded.org/openembedded-core/commit/?id=f774b44fa007a2a756ada892ede832b1251d940c For consistency, squash whitespace within PACKAGE_EXTRA_ARCHS strings too. (From OE-Core rev: 5610c6397ee098dd998b7417b343494de77179f9) Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* qemux86*.conf: set wic-related parametersEd Bartosh2016-11-302-0/+6
| | | | | | | | | | | | | | | | | Set directdisk.wks as default wks to use for qemux86 machines. Set requried dependeincies to build directdisk image. This should simplify building wic images for qemux86* machines. It should be enough to add wic to the list of IMAGE_FSTYPES to get the images built. [YOCTO #10637, YOCTO #8719] (From OE-Core rev: 8716b8b9be05e3f140bfa426a8e0d4eeaa2edcbe) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* conf: Remove redundant toasterconf.json fileMichael Wood2016-11-301-77/+0
| | | | | | | | | | | We no longer use this file to start toaster. Toaster's configuration is setup by Toaster itself using the standard Django data fixtures. (From OE-Core rev: 2db008e1c1d6ce81d4a266c7671e4135ff250e63) Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* arch-arm64.inc: Include arch-armv7ve.incKhem Raj2016-11-301-1/+1
| | | | | | | | | | | All armv8 implementations from a53 - a73 supports virtual extentions (From OE-Core rev: f896375c60d8ce0f1293f5329163172e946f46df) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* x11-common: Merge into xserver-nodm-initJussi Kukkonen2016-11-301-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | Move the (non-factual) x utils dependencies from x11-common to x11 packagegroup. Remove some obsolete configuration from x11-common: * Xsession.d/12keymap.sh: commented out xmodmap call for kdrive * default.xmodmap: xmodmap file used by 12keymap.sh * Xdefaults: rxvt configuration At this point x11-common is just /etc/X11/Xsession and three non-intrusive Xsession scripts: make these explicitly part of xserver-nodm-init. RCONFLICT with the versions of xserver-common that also provide these files. VIRTUAL-RUNTIME_xserver_common is no longer a real abstraction but preserve the setting for backwards compatibility (if the variable is set to "xserver-common", the right thing still happens). (From OE-Core rev: ee153327b046fe8474e498f39ecc87e573bc8604) Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* conf: add C++ flags for uninative interoperatilityRoss Burton2016-11-282-1/+11
| | | | | | | | | | | | | | | | | Create a common include file for compiler flags which allow native binaries to be interoperable on a wide range of hosts. In particular the C++ ABI is problematic so choose the CXX11 version to allow interoperation between gcc4 and gcc5 based hosts. Moving this to a common include instead of uninative.bbclass allows uninative to be configured later and used in the eSDK (where its mandatory) even if the base configuration doesn't enable uninative by default (e.g. nodistro in OE-Core). [ YOCTO #10645 ] (From OE-Core rev: 60c912ae9306532bdd4c5e09a65863ee77c12f43) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* licenses.conf: Fix variable name in comments (FOSS_NO_COPYRIGHT)Olof Johansson2016-11-231-3/+2
| | | | | | | | | | | | | | | A FOSSology related variable was renamed from FOSS_COPRYIGHT to FOSS_NO_COPYRIGHT, but the comment block describing the variable in licenses.conf was missed. Besides fixing this, this change also removes a redundant comment about where the variable is defined (it's right there! ;-)). (From OE-Core rev: 5f08d4ea1b4ddf04d7f1d8aa38c0dac9b1af44bc) Signed-off-by: Olof Johansson <olofjn@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* qemuarm64.conf: make runqemu's graphics workRobert Yang2016-11-151-1/+1
| | | | | | | | | | | | Fixed: $ runqemu qemuarm64 (without -nographics) There is no output in qemu console without this fix. (From OE-Core rev: 40a64e64b2ff41661ff254d0836c5f60120c6795) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake.conf: Reduce duplication in MIPS variantsZubair Lutfullah Kakakhel2016-11-151-10/+1
| | | | | | | | | | | Reduce duplication in MIPS variants now that the MACHINEOVERRIDES variable is defined (From OE-Core rev: 4499bca90887a0a7e7943403372654bf9e902b17) Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* arch-mips: Add MACHINEOVERRIDES variables to reduce duplicationZubair Lutfullah Kakakhel2016-11-152-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | In some cases, each MIPS variant in a recipe requires a duplicate line. Even if the passed flag is the same. Add global MACHINEOVERRIDES variables for the following * mipsarch : All MIPS * mipsarch{eb,el} : All MIPS Big/Little Endian * mipsarchr6 : All MIPS R6 * mipsarcho32 : All MIPS o32 Endian Independent * mipsarchn32 : All MIPS n32 Endian Independent * mipsarchn64 : All MIPS n64 Endian Independent * mipsarcho32{eb,el} : All MIPS o32 Big/Little Endian * mipsarchn32{eb,el} : All MIPS n32 Big/Little Endian * mipsarchn64{eb,el} : All MIPS n64 Big/Little Endian This is intended to reduce duplications in recipes [YOCTO #10404] (From OE-Core rev: 0d2205f26e5ece089630f72af2bd5f0931e851c3) Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* arch-mips: Add o32 in TUNE_FEATURES for MIPS32R6Zubair Lutfullah Kakakhel2016-11-151-4/+4
| | | | | | | | | | mips32r6 tunings should have o32 ABI flag in TUNE_FEATURES (From OE-Core rev: b2320b7a183dac6b1fcf56db6eadd895554886e1) Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* runqemu: add user mode (SLIRP) support to x86 QEMU targetsTodor Minchev2016-11-061-0/+1
| | | | | | | | | | | | | | | | Using 'slirp' as a command line option to runqemu will start QEMU with user mode networking instead of creating tun/tap devices. SLIRP does not require root access. By default port 2222 on the host will be mapped to port 22 in the guest. The default port mapping can be overwritten with the QB_SLIRP_OPT variable e.g. QB_SLIRP_OPT = "-net nic,model=e1000 -net user,hostfwd=tcp::2222-:22" (From OE-Core rev: 80e6fc678f3dcd774d9376cdf2a6afcba2cd0b09) Signed-off-by: Todor Minchev <todor.minchev@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/nativesdk: set SDK_OLDEST_KERNEL appropriatelyPaul Eggleton2016-11-064-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | SDK_OLDEST_KERNEL currently only controls the check on SDK installation, however as with OLDEST_KERNEL it should be controlling the OLDEST_KERNEL value for building glibc used in the SDK. Thus, set it in nativesdk.bbclass. This means we need to move the default to bitbake.conf so that it can be seen in both places. Also set a more reasonable default for SDK_OLDEST_KERNEL for x86/x86-64 as glibc 2.24 still supports back to 2.6.32 there and there are still people wanting to build SDKs that will install on older distros (e.g. CentOS 6). However it's not possible to set this with overrides since there aren't any for the SDK_ARCH, however we can instead set the variable from conf files in conf/machine-sdk especially as there is now a soft default for SDKMACHINE. Fixes [YOCTO #10561]. (From OE-Core rev: 42d5781e31c5bf76b5b7e27abed4f6f3fd65bf40) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* conf: Use xf86-input-libinput by defaultJussi Kukkonen2016-11-014-13/+1
| | | | | | | | | | | | | | | | | | | | | | | Don't install legacy X input drivers for any machines by default, RRECOMMEND xf86-input-libinput instead. This is the setup suggested by upstream: install only libinput by default, but let niche legacy drivers sort higher in configuration so they get chosen if installed. So the order is: evdev < libinput < (synaptics|vmmouse|...) This also removes vmmouse X driver from the qemu config. If a VMware virtual mouse device really needs to be supported, we should enable CONFIG_MOUSE_PS2_VMMOUSE in kernel instead: that is directly supported by the libinput X driver. Fixes [YOCTO #10195]. (From OE-Core rev: 2d005faff6341a81a2afae28860101ba9db51ae8) Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* musl: enable gobject introspectionAlexander Kanavin2016-10-281-4/+0
| | | | | | | | | | | It's working with recent versions of musl, so there's no reason to keep it disabled. (From OE-Core rev: 6bf1541dc0367930b5ebe58293b4857c41bc2f1b) Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* arch-mips.inc: remove duplicates from PACKAGE_ARCHSRobert Yang2016-10-151-1/+1
| | | | | | | | | | | | | | | | | | | Fixed: MACHINE = "qemumips64" DEFAULTTUNE = "mips64-o32" $ bitbake linux-yocto ERROR: OE-core's config sanity checker detected a potential misconfiguration. Either fix the cause of this error or at your own risk disable the checker (see sanity.conf). Following is the list of potential problems / advisories: Error, the PACKAGE_ARCHS variable contains duplicates. The following archs are listed more than once: mips64-o32 (From OE-Core rev: e57d70e6803c63823ae3a7c7971fc06db3748b68) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* x86-base: Update version to 4.8Saul Wold2016-10-151-1/+1
| | | | | | | | | | | This update will avoid confusion with other parts of OE-Core that set the kernel version to 4.8 for qemux86* and genericx86*. (From OE-Core rev: 7f8c36d8aa00da109e842c790c6a0ab7a849de72) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove RM_OLD_IMAGE, it's no longer usefulJoshua Lock2016-10-151-1/+0
| | | | | | | | | | | | | | | | Since the move to put image deployment under sstate control in d54339d4b1a7e884de636f6325ca60409ebd95ff old images are automatically removed before a new image is deployed (the default behaviour of the sstate logic). RM_OLD_IMAGE is therefore no longer required to provide this behaviour, remove the variable and its users. (From OE-Core rev: 93631befe8b962bf99524746b49f4ebca336175c) Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* security_flags: Diable PIE for mesa-glKhem Raj2016-10-071-0/+1
| | | | | | | | | | | | | | | | This creeped in along with rest of the changes in c999b3d88dfcffbe0fb66406fb0bff1fb66f34bc even after it was reported a build failure in mesa-gl This is also showing up on arm architecture now | /usr/src/debug/glibc/2.24-r0/git/csu/elf-init.c:87: undefined reference to `__init_array_end' | /usr/src/debug/glibc/2.24-r0/git/csu/elf-init.c:87: undefined reference to `__init_array_start' | /a/builder/mnt/build/tmp-glibc/sysroots/x86_64-linux/usr/libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/6.2.0/ld: .libs/mesa_dri_drivers.so: hidden symbol `__init_array_end' isn't defined (From OE-Core rev: 9211fb2a6d6c2d72ec7c2664737aee3a6b6149cf) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* arch-mips: Add mipsisa{32, 64}r6{el, } tunesZubair Lutfullah Kakakhel2016-10-074-2/+88
| | | | | | | | | | | | | | | | | | | | | | | Add support for MIPS Release 6 ISA and the various tune configurations. This patch adds the tunes for 32r6 and 64r6 n64 and not the n32 variants at the moment. Release 6 onwards, the tuples are now - mipsisa32r6-linux-gnu - mipsisa32r6el-linux-gnu - mipsisa64r6-linux-gnuabi64 - mipsisa64r6el-linux-gnuabi64 - mipsisa64r6-linux-gnuabin32 - mipsisa64r6el-linux-gnuabin32 For more details, check https://wiki.debian.org/Multiarch/Tuples (From OE-Core rev: 6b2e0c60c3222a13b33284f258d5c340222d759f) Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake.conf: Add mipsisa{32, 64}r6{el, } supportZubair Lutfullah Kakakhel2016-10-071-0/+5
| | | | | | | | | Add support for MIPS Release 6 ISA (From OE-Core rev: 582374542b8374fc5d7894387de2ba746afcd036) Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* uninative: users can override download sitebavery2016-10-061-1/+1
| | | | | | | | | | | | | The default download site for the uninative tarball is http://downloads.yoctoproject.org/releases/uninative/<version>. There are scenarios in which the user may need to force the download to be somewhere else. This patch allows the UNINATIVE_URL to be set in the local.conf. (From OE-Core rev: 2778178b5a0d0e072c0cf7c3569bc1f5ccd82b53) Signed-off-by: bavery <brian.avery@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity: Update minimum version requirement to 1.31.2Richard Purdie2016-10-051-1/+1
| | | | | | | | | This is so we can depend on the bb event threading fix which prevents event pipe corruption. (From OE-Core rev: 728269fe2839533a05e7f2532209466dc34e4174) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* machine-sdk: Clear ABIEXTENSION to avoid sstate checksum mismatch issuesRichard Purdie2016-10-013-0/+3
| | | | | | | | | When switching MACHINE, nativeksdk recipes could end up being rebuilt. Clear ABIEXTENSION to avoid this problem and ensure sstate checksum consistency. (From OE-Core rev: 21cc2a3f63ea260dbf6b50e2fd4dd50cacdd9935) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* multilib.conf: Ensure sstate checksums don't change when using this includeRichard Purdie2016-10-011-1/+2
| | | | | | | | | When enabling multilib.conf, the world was rebuilding due to changes in the pkg-config search path. This doesn't matter so exclude it from the checksums. (From OE-Core rev: 22001ba163e80b114212580279339acd15fa7298) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* SDK: Allow changing SDKMACHINE without wiping TMP folderJuro Bystricky2016-09-281-6/+6
| | | | | | | | | | | | | | | | | | | When changing SDKMACHINE, we may encounter an error forcing us to wipe the TMP folder. Since only SDK_ARCH is captured in the PN of the crosssdk recipes, changes to SDK_OS result in conflicts. Eventually we hit the error: ERROR: ...: The recipe <...> is trying to install files into a shared area when those files already exist. The build has stopped as continuing in this scenario WILL break things This patchset addresses the problem by SDK_SYS as the recipe name suffix instead of SDK_ARCH. [YOCTO #9281] (From OE-Core rev: d2eccccb70e809d482c493922f23aef4409cfd82) Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* machine/qemu*: Add comment regarding the reason for virtio-rng-pciNathan Rossi2016-09-285-0/+5
| | | | | | | | | | | Bring across the comment that was in runqemu regarding why the virtio-rng-pci device was needed. This comment is added to each location where the virtio-rng-pci device is added. (From OE-Core rev: bc5d1fdea674e842e4b0c45b38782930ec133051) Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* uninative: Upgrade to 1.4Richard Purdie2016-09-281-4/+3
| | | | | | | | | This adds the new version of patchelf which resolves issues some users were seeing with older versions. (From OE-Core rev: c9fc6dbba5cb6193fa51538ab1d6a16d1376bea8) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* arch-mips: Add mips64-o32 tunesZubair Lutfullah Kakakhel2016-09-241-0/+26
| | | | | | | | | Add mips64 + o32 rootfs abi tune configurations (From OE-Core rev: ae5073c4abd8935c01d14d3e6395124f815bd10b) Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* tune-ppc[65]00.inc: Disable QEMU usermode usageOtavio Salvador2016-09-242-0/+6
| | | | | | | | | | | The QEMU usermode fails with invalid instruction error when used with those tunes. The issue is being tracked in [YOCTO: #10304]. (From OE-Core rev: f9fd1a7fdf03ade9735e137a526a54e723d03dc6) Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* arch-mips: Add mips64r2 tunesZubair Lutfullah Kakakhel2016-09-241-0/+84
| | | | | | | | | Add MIPS64r2 optimizations (From OE-Core rev: 4c10376bdfd54af75de840bd4a31386e6e89477e) Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake.conf: add eudev's udevdir to FILES_${PN}Robert Yang2016-09-241-1/+2
| | | | | | | | | | | | | * The eudev's udevdir can be ${base_libdir}/udev or ${libdir}/udev, it doesn't have to be hardcoded to /lib/udev, so add them FILES_${PN}. * Use /lib/udev rather than /lib/udev/rules.d for FILES_${PN} since there might be files in /lib/udev except subdir rules.d (From OE-Core rev: e1b81a80760fc79612254804e429cab5228b1ab6) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* runqemu: Move virtio RNG to machine configurationNathan Rossi2016-09-235-5/+5
| | | | | | | | | | | | | | | | | Not all QEMU machines (outside of those available in OE-Core) are capable of using the virtio-rng-pci device due to various machine models not having a pci/virtio bus. This makes it such that the use of the '-device virtio-rng-pci' flag to QEMU is machine specific. This patch removes the general addition of the flag to all runqemu targets and adds the flag into the QB_OPT_APPEND for all the qemu* machines in OE-Core that support its use (which is all of them). (From OE-Core rev: e890c05e66a21702e9e8ccce794b74cb7f5518ed) Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake.conf: add a lazy default for SDKMACHINERoss Burton2016-09-231-1/+1
| | | | | | | | | | | | | If the user doesn't set SDKMACHINE in their local.conf then uninative and buildtools will fail in obscure ways, so ensure that a default value is set. Also as SDK_ARCH will be overritten then loading the machine-sdk configuration file, don't bother assigning it. (From OE-Core rev: 6bd507ef36578ba7bee6ef8b3f8f6465afca4e20) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* default-distrovars.inc: remove libidn from LGPLv2_WHITELIST_GPL-3.0Jackie Huang2016-09-201-1/+1
| | | | | | | | | | | | The libidn recipe is now buildable in distros which blacklist GPL-3.0 without needing to be explicitly whitelisted (since it provides at least one non GPLv3 package). (From OE-Core rev: 63d6d014a0a3da8bf5689b27d1155492e2fdb0f2) Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* qemuppc.conf: adjust kernel consoleRobert Yang2016-09-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed kernel trace when booting: [ 12.825809] random: crng init done [ 13.918323] irq 36: nobody cared (try booting with the "irqpoll" option) [ 13.924821] CPU: 0 PID: 335 Comm: getty Not tainted 4.8.0-rc5-yocto-standard #1 [ 13.930492] Call Trace: [ 13.936214] [cff73f20] [c00790f0] __report_bad_irq.isra.0+0x3c/0x128 (unreliable) [ 13.941908] [cff73f40] [c0079518] note_interrupt+0x2b8/0x304 [ 13.947265] [cff73f70] [c00766f4] handle_irq_event_percpu+0x5c/0x74 [ 13.952503] [cff73f90] [c0076768] handle_irq_event+0x5c/0xdc [ 13.957667] [cff73fa0] [c007a29c] handle_fasteoi_irq+0xdc/0x234 [ 13.962984] [cff73fc0] [c007592c] generic_handle_irq+0x3c/0x58 [ 13.968288] [cff73fd0] [c0006c74] __do_irq+0x54/0x18c [ 13.973612] [cff73ff0] [c000f9c8] call_do_irq+0x24/0x3c [ 13.978742] [cf0cdb70] [c0006e40] do_IRQ+0x94/0x110 [ 13.983992] [cf0cdba0] [c001215c] ret_from_except+0x0/0x14 [ 13.989281] --- interrupt: 501 at pmz_set_termios+0x130/0x6d8 [ 13.989281] LR = pmz_set_termios+0xf0/0x6d8 [ 13.999353] [cf0cdc90] [c049f130] uart_change_speed.isra.2+0x60/0x168 [ 14.004436] [cf0cdcb0] [c049fdbc] uart_startup.part.8+0xec/0x1e0 [ 14.009625] [cf0cdce0] [c04a0ab4] uart_open+0x138/0x16c [ 14.014723] [cf0cdd00] [c047e510] tty_open+0x118/0x65c [ 14.019743] [cf0cdd60] [c01894c8] chrdev_open+0xdc/0x1e0 [ 14.024616] [cf0cdd90] [c01807d0] do_dentry_open+0x23c/0x358 [ 14.029418] [cf0cddc0] [c0194878] path_openat+0x58c/0x1084 [ 14.034054] [cf0cde50] [c01965b4] do_filp_open+0xbc/0x10c [ 14.038539] [cf0cdf00] [c01822fc] do_sys_open+0x154/0x224 [ 14.043105] [cf0cdf40] [c0011a44] ret_from_syscall+0x0/0x38 [ 14.047828] --- interrupt: c01 at 0xfeef5a0 [ 14.047828] LR = 0xfeef544 [ 14.056543] handlers: [ 14.060980] [<c04a2b10>] pmz_interrupt [ 14.065468] Disabling IRQ #36 (From OE-Core rev: 7c6d0e4ada6dea6ac994e637b7d5cf007f73e411) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* qemuboot-x86: Add task_timeout = -1 to uvesafbSaul Wold2016-09-161-1/+1
| | | | | | | | | | This causes the default timeout to be set to infinity, it will still report out every 5000 milliseconds (From OE-Core rev: fd9e1ba8f70402bd3c4b873d349057f96f5bcb19) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake.conf: Add BBSERVER to HASHBASE_WHITELISTEd Bartosh2016-09-141-1/+1
| | | | | | | | | | | | | | | | Using BBSERVER variable in checksum calculations causes unnecessary rebuilds when running memres bitbake. Whitelisted BBSERVER variable to prevent this unwanted behaviour. [YOCTO #10201] (From OE-Core rev: c9d949053cc0de1d8fbf8be2fa7c2cc30383ea51) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-05-18 18:37:28 +0000