summaryrefslogtreecommitdiffstats
path: root/meta/classes
Commit message (Collapse)AuthorAgeFilesLines
* reproducible: Consistent debug loggingDouglas Royds2018-09-211-8/+11
| | | | | | | | | | | | | | | Log both the source of the source_date_epoch and the resulting source_date_epoch in all cases. Also, now that we are determining the source_date_epoch successfully for both yocto and non-yocto kernels, remove the inherits_class('kernel') exception. We will log a failure to find a source_date_epoch for kernels as well. (From OE-Core rev: 48fe0e83435f9fb53b1e5b37d5d9f1c2caccd22d) Signed-off-by: Douglas Royds <douglas.royds@taitradio.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* reproducible: Don't enforce existence of ${S} dirDouglas Royds2018-09-211-5/+1
| | | | | | | | | | Unnecessary. (From OE-Core rev: 75d5a9d72566aca7a9f08bea21523b3c66bddeae) Signed-off-by: Douglas Royds <douglas.royds@taitradio.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* reproducible: Find the git repo in WORKDIR/git or S firstDouglas Royds2018-09-211-12/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the search regime for find_git_folder(): 1. WORKDIR/git: This is the default git fetcher unpack path 2. ${S} 3. Go looking for .git/ under the WORKDIR as a last resort. linux-yocto: We had an existing (silent) defect. The linux-yocto recipes all specify two git SRC_URIs, one for the kernel source itself, the other for the kmeta data (config fragments and friends). find_git_folder() was finding the git checkout for the kmeta data, but due to a typo in the git log -1 --pretty=%ct line, we were (silently) reading the source_date_epoch from the ${S} directory = STAGING_KERNEL_DIR, which is empty. If your build/ happened to be inside a git checkout, git would walk up the directory tree, and silently read the commit timestamp from this other git checkout. The correct path to read the git commit timestamp from is the "gitpath", being that found by find_git_folder(), though this function was incorrectly finding the kmeta data checkout, not the kernel source tree. Non-kernel git recipes: The default git fetcher clones and checks out the sources at WORKDIR/git/ regardless of the setting of S (unless subpath or destsuffix is set). find_git_folder() now looks for the WORKDIR/git/.git/ directory first. Non-yocto linux kernels: Kernel recipes that don't inherit kernel-yocto should always set S = ${WORKDIR}/git, so that when base_do_unpack_append() in kernel.bbclass moves the checkout down to the STAGING_KERNEL_DIR and symlinks it as WORKDIR/git, the build can still work by following the symlink. We were previously failing to follow the symlink in the os.walk(), but we now look first for WORKDIR/git/.git/, and find it due to the symlink. If none of the above mechanisms work for finding the git checkout, perhaps there was a subpath or destsuffix specified in the SRC_URI. We go looking for the git checkout under the WORKDIR as a last resort. (From OE-Core rev: b0ddb141d36853447f85ecaac07dbc9c5779627f) Signed-off-by: Douglas Royds <douglas.royds@taitradio.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* reproducible: Rename ambiguous "path" var to sourcedir or workdir as appropriateDouglas Royds2018-09-211-18/+19
| | | | | | | | (From OE-Core rev: 01358d6a89623a38e66969daa431d2eecb1ce8a2) Signed-off-by: Douglas Royds <douglas.royds@taitradio.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* reproducible: Refactor: get_source_date_epoch_from_youngest_file()Douglas Royds2018-09-211-33/+40
| | | | | | | | (From OE-Core rev: 2c8baf6c50e5a266a1e9ac939415bd481668e17e) Signed-off-by: Douglas Royds <douglas.royds@taitradio.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* reproducible: Tidy class descriptionDouglas Royds2018-09-211-27/+22
| | | | | | | | | | Tidy whitespace, delete commented-out lines (From OE-Core rev: 254eb5a2a12fd6b5cf7427818ea9fa886ea407a6) Signed-off-by: Douglas Royds <douglas.royds@taitradio.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linuxloader.bbclass: Refactor to have seprate functions for musl/glibc loaderKhem Raj2018-09-211-36/+49
| | | | | | | | | | | | | this makes it possible to use this for musl where we are trying to create a glibc compat package Add missing aarch64 loader definition for glibc function (From OE-Core rev: 0a02ea79ec522582b46138a027eb166819e5647d) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* uninative: Add support for aarch64 hostsRichard Purdie2018-09-201-2/+3
| | | | | | (From OE-Core rev: b72e54b9a649faf4eb292e3bc643d5d06d4d4fea) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* insane: Recognise BPF as a valid EM_MACHINE typeKhem Raj2018-09-131-2/+4
| | | | | | | | | | | | | | | | BPF Linux ELF objects are generated with kernel-selftests with >= 4.18 kernel and when clang is enabled which packages BPF objects into packages, therefore recongnise this as a valid ELF target Add a selftest for BPF Do not flag BPF objects in target, since they pretty much will be ok for most of kernels architectures we care do support BPF (From OE-Core rev: 3667a8ec016bae3f8026ef7b4c895546804f6368) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* target-sdk-provides-dummy: skip package_qa_multilib checkKai Kang2018-09-132-2/+5
| | | | | | | | | | | | | | | The rprovides of target-sdk-provides-dummy don't be updated with multilib, so it fails package_qa_multilib check. Because target-sdk-provides-dummy doesn't install any file to sysroot, it is safe to skip package_qa_multilib check for target-sdk-provides-dummy. Remove ${MLPREFIX}target-sdk-provides-dummy from TOOLCHAIN_TARGET_TASK at same time in populate_sdk_base.bbclass. (From OE-Core rev: 3197c086269a4b21fb807a9c552b56f23c5b86dc) Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sstate.bbclass: update SSTATE_DUPWHITELISTKai Kang2018-09-131-1/+3
| | | | | | | | | | | | Update SSTATE_DUPWHITELIST in sstate.bbclass. * remove ${DEPLOY_DIR_RPM}/noarch/ which is not overwritten any more * add directories for package target-sdk-provides-dummy (From OE-Core rev: 6d3ca476dbc2059f4b7fa3dfd73de6bbfed49198) Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* allarch: only enable allarch when multilib is not usedKai Kang2018-09-135-9/+22
| | | | | | | | | | | | | | | | | | | | | Some allarch packages rdepends non-allarch packages. when multilib is used, it doesn't expand the dependency chain correctly, e.g. core-image-sato -> ca-certificates(allarch) -> openssl we expect dependency chain for lib32-core-image-sato: lib32-core-image-sato -> ca-certificates(allarch) -> lib32-openssl it should install lib32-openssl for ca-certificates but openssl is still wrongly required. Only enable allarch when multilib is not used to fix the issue. (From OE-Core rev: a23c482cab4f874f4a6a6889716123569eb5ece9) Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel.bbclass: do not deploy fitImage; kernel-fitimage.bbclass does that.Leon Woestenberg2018-09-131-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | kernel-fitimage.bbclass replaces an occurance of "fitImage" in KERNEL_IMAGETYPE_FOR_MAKE by an image type that is buildable for the architecture (such as zImage). The kernel-fitimage.bbclass packs that image as sub-image in a flattened image tree image (fitImage) and deploys this fitImage along with the image tree source file (.its). kernel-fitimage.bbclass does not alter KERNEL_IMAGETYPES, which thus also contains "fitImage", which kernel.bbclass will also deploy redundantly with different naming. The result is a dual deployment with slightly different naming, each with a set of symlinks. The solution chosen is to have fitImage deployment be handled by kernel-fitimage.bbclass, and have kernel.bbclass ignore fitImage types during deployment. (From OE-Core rev: 65cded55fa96b1ba72149a31689c081ac27af7f7) Signed-off-by: Leon Woestenberg <leon@sidebranch.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* devicetree.bbclass: don't pad DT overlaysLuca Ceresoli2018-09-131-2/+5
| | | | | | | | | | | | | | | | | | | | By default the devicetree class adds padding to the generated .dtb files, which can be needed by the bootloader. However it also pads .dtbo files, which is not useful. Don't apply padding to the overlay devicetrees. To achieve this: * move "-p ${DT_PADDING_SIZE}" to a new variable, DTB_BFLAGS (B for "base") * add "-p 0" to DTC_OFLAGS to disable padding for overlays Cc: Nathan Rossi <nathan@nathanrossi.com> (From OE-Core rev: 678fe8c66b19f141f6869859cf365aec037e89d9) Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* testimage.bbclass: fix qemu_use_kvm handlingEmmanuel Roullit2018-09-131-2/+2
| | | | | | | | | | | | | | | | QEMU_USE_KVM can either be a boolean or a whitespace separated list of kvm supported machines. For the 'intel-corei7-64' machine, defined in meta-intel, kvm could not be used as the 'x86' substring is not part of its machine name. By changing the order of this 'or' statement and setting the 'QEMU_USE_KVM' variable to 'intel-corei7-64', it is possible to run the 'testimage' task with kvm support successfully. (From OE-Core rev: a22789253aa653dc50fb159b40910248c2f98dd4) Signed-off-by: Emmanuel Roullit <emmanuel.roullit@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* staging: Fix broken debug codeRichard Purdie2018-09-101-1/+1
| | | | | | | | | The code currently only prints a single depchain due to overwriting data instead of appending. Fix this. (From OE-Core rev: 48af19cdfa92aa9d336da50afe4ed3dde92daecc) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* staging: Ensure we handle glibc-locale do_stash_locale correctlyRichard Purdie2018-09-101-0/+2
| | | | | | | | | | | | | | | | | | | | Occasionally we see warnings like: WARNING: core-image-sato-1.0-r0 do_populate_sdk: Manifest /home/pokybuild/yocto-worker/nightly-qa-extras/build/build/tmp/sstate-control/manifest-allarch-nativesdk-linux-libc-headers.populate_sysroot not found in i686_linux allarch (variant '')? which occur when do_populate_sdk is run in an otherwise empty TMPDIR. It occurs because do_stash_locale is not recognised as a setscene task and is removed from the taskgraph meaning the dependency chains fed through setscene_depvalid don't match what was actually setscene'd. That task is recipe specific and not in the global SSTATETASKS so we hardcode the value for now to stop the build warnings. This is going to need to be revisited for a more generic solution. (From OE-Core rev: d8d5b624058920113f9d297f7f711d6d3249ae39) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* populate_base_sdk: Stop running gcc --version all the timeRichard Purdie2018-09-051-1/+1
| | | | | | | | | | Running 'gcc --version' for every image recipe is slow and increases parsing time/resource usage for no good reason. Only compute the value in when we're really running the task/function. (From OE-Core rev: bf49316bb9913b7c89de64d6a194be31aa66e16b) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* autotools.bbclass: adjust indentation for consistencyChen Qi2018-09-051-1/+1
| | | | | | | | | | All other functions in this class use TAB for indentation while the do_compile function uses '4 spaces'. Adjust it for consistency. (From OE-Core rev: c2829b74892633c554a5f8262d4cafbe0fa6c3a7) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* recipes: Update git.gnome.org addresses after upstream changesRichard Purdie2018-09-042-2/+2
| | | | | | | | | | | | | | | git.gnome.org is no more. It has ceased to be. It's an ex-git. Please see here: https://about.gitlab.com/2018/05/31/welcome-gnome-to-gitlab/ Note that gitlab does not support git://, only https:// (and ssh). [Commit message from Alexander Kanavin] (From OE-Core rev: 8382cdc0888ca645a44aacaac1155afb8dcde979) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package.bbclass: warn if perms conf file does not existChen Qi2018-09-041-1/+5
| | | | | | | | | | | | | | It's possible that the perms conf file specified by FILESYSTEM_PERMS_TABLES does not exist. Currently, this situation is silently ignored, which is likely to lead to further do_rootfs failures. So fix to output a warning, telling user that the specified file in FILESYSTEM_PERMS_TABLES cannot be found. (From OE-Core rev: e14b9f2a667889092251053933dc2f3c51f01ef0) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libc-package: Add risc-v specific options to cross-localedef invocationKhem Raj2018-09-041-0/+2
| | | | | | | | | It was otherwise being deferred until boot time (From OE-Core rev: f8a4ce9b2d59a380d35305a2cd7f73b279bbd8f5) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* distutils-common-base.bbclass: Define commonly used compiler variablesKhem Raj2018-09-041-0/+12
| | | | | | | | | | | | | | | This is inspired from https://github.com/python/cpython/blob/master/configure.ac Helps cross compiling python C modules in some cases where they do not respect normal CFLAGS Errors like using gcc to link when compiler is clang is fixed (From OE-Core rev: 0ab1b35172a41021f5e27c5d17d1e131ce5befd7) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cpan.bbclass: make RPATH fix more generalJens Rehsack2018-08-281-0/+10
| | | | | | | | | | | | | | | | | Extract a general version of RPATH fix for libxml-parser-perl_2.44.bb from 292471701 libxml-parser-perl: fix "...contains bad RPATH" into cpan.bbclass to catch most errors reported by Khem Raj via http://errors.yoctoproject.org/Errors/Build/66538/ Genrally, Perl 5 toolchain deals with cross-compile sysroots as if a dependency is installed at an exostic place on a server. This issue needs to be addressed wider into the community. (From OE-Core rev: a5439ff9627d309f6980947f5ee573d85e672228) Signed-off-by: Jens Rehsack <sno@netbsd.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-yocto: restore BSP audit visibilityBruce Ashfield2018-08-281-0/+22
| | | | | | | | | | | | | | | | | | | | During the re-working of kernel fragments and status output cleanup the visibility for BSP level errors was dropped/removed. The audit phase can detect errors, redefinition and invalid configuration fragments. We control the visibility of these reports via the existing KCONF_BSP_AUDIT_LEVEL variable. By default, errors and invalid configuration values will be displayed as a warning. If redefinition values are to be shown the audit level must be raised above the deafult value of '2'. We inhibit these by default, since there are many valid reasons why a BSP will change a default / base config .. and showing them offers no value to the BSP user. (From OE-Core rev: 4933b686b0f75d6841630917a2d90832df41cac7) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/kernel-yocto: Cleanup getstatusoutput usageJoshua Watt2018-08-281-7/+17
| | | | | | | | | | | | Replace usage of os.utils.getstatusoutput() with direct subprocess calls. Pass a modified environment and working directory where necessary to bypass the need to execute in a shell. (From OE-Core rev: 21de5cc43cfedc703e5bc0515507a6dae36afb74) Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sstate.bbclass: make SSTATE_PRUNE_OBSOLETEWORKDIR could be overwrittenKai Kang2018-08-281-1/+1
| | | | | | | | | | Define variable SSTATE_PRUNE_OBSOLETEWORKDIR with '?=' in sstate.bbclass, then it could be overwritten by user configuration. (From OE-Core rev: 22af59c9bfec31b31027ebd2a4da162f481aa6b5) Signed-off-by: Kai Kang <kai.kang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* terminal.bbclass: use var-SHELL as the shebang of wrapper scriptHongxu Jia2018-08-281-1/+2
| | | | | | | | | | | | | | The devshell.bbclass set var-SHELL to var-DEVSHELL, and terminal.bbclass initial var-SHELL with `bash'. Keep sync with it, use var-SHELL rather than hardcoded `/bin/sh' as the shebang of wrapper script. On Ubuntu host, default shell is dash (/bin/sh -> dash), even though we assign var-SHELL with `/bin/bash', the wrapper script is still dashism. (From OE-Core rev: 27e2ede65f1193e49f9483b08a55495d88740a65) Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package.bbclass: only one hardlink of separated debug info file in each ↵Hongxu Jia2018-08-281-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | directory While multiple hardlinks of binary located in different dirs, there are also multiple hardlinks of separated debug info file with the same binary name in same debug dirs. But in each dir, only one debug file with original name works. Because all of binary hardlinks have one `.gnu_debuglink' which is added in `splitdebuginfo'. It caused gdb could not find debugging symbols. [Before the patch] $ find . ./usr/bin/foo ./usr/bin/foo-hd1 ./usr/bin/.debug ./usr/bin/.debug/foo ./usr/bin/.debug/foo-hd1 ./usr/libexec/foo-hd2 ./usr/libexec/.debug ./usr/libexec/.debug/foo-hd2 $ readelf --debug-dump usr/libexec/foo-hd2 Contents of the .gnu_debuglink section: Separate debug info file: foo $ gdb usr/libexec/foo-hd2 Reading symbols from usr/libexec/foo-hd2...(no debugging symbols found)...done. [Before the patch] [Apply the patch] $ find . ./usr/bin/foo ./usr/bin/foo-hd1 ./usr/bin/.debug ./usr/bin/.debug/foo ./usr/libexec/foo-hd2 ./usr/libexec/.debug ./usr/libexec/.debug/foo $ gdb usr/libexec/foo-hd2 Reading symbols from usr/libexec/foo-hd2...Reading symbols from usr/libexec/.debug/foo...done. [Apply the patch] (From OE-Core rev: d4eaf42f7708f8d3a31a04d958bd7420dd7dd6b9) Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* utils.bbclass: fix KeyError exceptionChen Qi2018-08-241-0/+1
| | | | | | | | | | | | | | | The following statement was accidently removed. Add it back. values['ml'] = [''] This patch fixes the following error. Exception: KeyError: 'ml' (From OE-Core rev: 0791c4d39edbedaa493a9fc6aa6e7415f14980bb) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* compress_doc.bbclass: Clean up getstatusoutput usageRobert Yang2018-08-231-3/+4
| | | | | | | | | Replace usage of oe.utils.getstatusoutput() with direct subprocess calls. (From OE-Core rev: f1a1b31add242380490023c2ee7eec1b4fbcd85b) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* utils: Fix patch merging errorRichard Purdie2018-08-231-1/+1
| | | | | | | | | The previous patch has duplicate split calls and one needs to be removed to avoid failures (From OE-Core rev: 02c8d048cbab38a48f698504d0f5e912d3d24a36) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* utils: Rely on get_multilib_datastore() to get the original datastoreRichard Purdie2018-08-231-15/+1
| | | | | | | | | get_multilib_datastore() should be able to handle the original datastore correctly now so rely upon this rather than custom coding. (From OE-Core rev: 2ae85af480066e252fca01f3005ecac2ff37a8d4) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linuxloader: Convert to python functionRichard Purdie2018-08-233-69/+47
| | | | | | | | | | | We could do with one decent general purpose python function to query the path to the dynamic loader. Convert the shell code into python. Also correct baremetal to return "None", not musl loaders. (From OE-Core rev: 73fab4ede12d8ae31be72b5cb4ab29d7ef7dae17) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package.bbclass: use bb.utils.break_hardlinks helperRasmus Villemoes2018-08-231-1/+1
| | | | | | | | | | | | This does the same thing, but is more efficient in case st_nlinks is (already) 1. Depends on bitbake commit 7ae93cf40ab91965147055100432961436bce46c . (From OE-Core rev: 38180b5c1044be13458fb927ad1babae61e4c51f) Signed-off-by: Rasmus Villemoes <rv@rasmusvillemoes.dk> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cpan.bbclass: adopt to recent EU::MMJens Rehsack2018-08-231-2/+1
| | | | | | | | | | | | | | | | | The modern the time, the improvements in ExtUtils::MakeMaker. Nowadays, .packlist and perllocal.pod aren't touched anymore when appropriate flags set during configure stage. Controlling the flags globally avoids dual-life recipes need share patching. Further: remove prepending ${PERL_ARCHLIB} in PERL5LIB - it's wrong (search order is site_lib, vendor_lib, core) - and ${PERL_ARCHLIB} contains core libpath only ... (From OE-Core rev: 2e61533e7c1b1cfd49dc771e907207f11a15c44f) Signed-off-by: Jens Rehsack <sno@netbsd.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sstate: add intel-microcode to SSTATE_DUPWHITELISTYongxin Liu2018-08-231-1/+2
| | | | | | | | | | intel-microcode multilib recipes can generate identical overlapping files: microcode.cpio. (From OE-Core rev: 4b27da3334aff7f9f03ae934bbab7e7af07df3f6) Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/package: Clean up getstatusoutputJoshua Watt2018-08-231-8/+3
| | | | | | | | | | Replaces usage of the deprecated oe.utils.getstatusoutput() with Python subprocess calls. (From OE-Core rev: 7f9d2d16b8cdff9cbba2b3965c74d1c5b8ab1106) Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel.bbclass: rename type variable to imageTypeMartin Jansa2018-08-211-29/+29
| | | | | | | | | * to avoid confusion with "type" command in shell (From OE-Core rev: 8d454ea754c96561257b1cc011fa638ceaa771db) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-artifact-names.bbclass: Add 2 more variables to make it easier to ↵Martin Jansa2018-08-211-10/+13
| | | | | | | | | | | | | change all names with one variable * some people don't like the ${MACHINE} in the symlink, because now the DEPLOYDIR already contains ${MACHINE} subdirectory, add KERNEL_ARTIFACT_LINK_NAME variable to change it in one place without the need to list all variables for various artifacts (From OE-Core rev: 416b58d84f1124212f114198d2fcb1f3a9bbd223) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-artifact-names.bbclass, kernel.bbclass: remove prefix and extension ↵Martin Jansa2018-08-212-6/+4
| | | | | | | | | | | | | from MODULE_TARBALL_* variables * for consistency with other artifacts variables, include only the version string, not the actual name or extension * changing .tgz to something else in the MODULE_TARBALL_NAME variable only wouldn't make much sense because then kernel.bbclass still calls "tar -cvzf" to create it (From OE-Core rev: 43bd7f39157da49f7fb0c2d6d9751059471c8d53) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel*.bbclass: rename *_SYMLINK_NAME variables to *_LINK_NAME and ↵Martin Jansa2018-08-214-37/+37
| | | | | | | | | | | | | | *_BASE_NAME to *_NAME * for consistency with IMAGE_NAME and IMAGE_LINK_NAME and to avoid confusion with IMAGE_BASENAME (which is the actual name of the artifact, e.g. PN while KERNEL_IMAGE_BASE_NAME was only the version suffix) (From OE-Core rev: f952c8e08b4798aa0f8bf764cfd70bda0eae9b8b) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-artifact-names, kernel-fitimage: add KERNEL_FIT_BASE_NAME, ↵Martin Jansa2018-08-212-22/+15
| | | | | | | | | | | | | KERNEL_FIT_SYMLINK_NAME variables * use the same naming scheme for fitImage files like all other deployed artifacts * remove unnecessary cd to DEPLOYDIR * remove unnecessary cd to B (From OE-Core rev: fd69f8b2d7dd950cee9e820ef91ea90521c95ace) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake.conf, kernel-artifact-names.bbclass: introduce IMAGE_VERSION_SUFFIX ↵Martin Jansa2018-08-211-9/+4
| | | | | | | | | | | | instead of using DATETIME directly * this makes it easier to use different version string than DATETIME, e.g. set from jenkins job while keeping the suffix consistent across all artifacts stored in DEPLOYDIR (From OE-Core rev: 1245935b9bf32e0321d8ff12492983ba8506190a) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rootfs-postcommands: put image testdata under sstate controlAndré Draszik2018-08-211-7/+8
| | | | | | | | | | | | | | The testdata.json is being written to DEPLOY_DIR_IMAGE directly, thus bypassing sstate, which results in an ever growing list of files. Write them to IMGDEPLOYDIR instead, so as to benefit from the automatic management via sstate. (From OE-Core rev: 1f7399a5e5d12b7ca3faf399a70c1613d522c28d) Signed-off-by: André Draszik <andre.draszik@jci.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* dos2unix.bbclass: Move to oe-coreKhem Raj2018-08-201-0/+14
| | | | | | | | | | | | | - Import from meta-oe layer - This is useful for many packages where CR-LF needs to be adjusted, many recipes depend on it e.g. meta-multimedia libebml and so on. (From OE-Core rev: bd4a02d8d3cfb476a2da0f4616605c92604266c0) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* populate_sdk_base.bbclass: inherit and use image-postinst-interceptsChristopher Larson2018-08-161-1/+2
| | | | | | | (From OE-Core rev: fb83997ded3789c7447402a9fda03b1669cecae0) Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* image.bbclass: inherit and use image-postinst-interceptsChristopher Larson2018-08-161-0/+2
| | | | | | | (From OE-Core rev: 73cccdb6942404961415e5939263686719b24061) Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* image-postinst-intercepts.bbclass: add classChristopher Larson2018-08-161-0/+23
| | | | | | | | | | | | This class sets POSTINST_INTERCEPTS and POSTINST_INTERCEPTS_CHECKSUMS, to allow us to pull intercepts from BBPATH. This is kept as a separate class, as it's needed by both image construction and sdk construction, the latter to support meta-toolchain & similar recipes. (From OE-Core rev: 7a2044df4ae8d80cf25a6bfd9b71978ffefbfa33) Signed-off-by: Christopher Larson <chris_larson@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sstate: Optimise SSTATE_EXCLUDEDEPS_SYSROOT handlingRichard Purdie2018-08-161-3/+10
| | | | | | | | | Using re.compile() is around six times faster than recompiling the regexp each time so maintain a cache. (From OE-Core rev: 41eb382737706e245f2b7104e313c8dfaa370945) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-16 05:15:20 +0000