summaryrefslogtreecommitdiffstats
path: root/meta/classes
Commit message (Collapse)AuthorAgeFilesLines
* sanity: check the format of SDK_VENDORRoss Burton2019-10-191-0/+5
| | | | | | | | | | | | | | | If SDK_VENDOR isn't formatted as -foosdk and is instead for example -foo-sdk then the triple that are constructed are not in fact triples, which results in mysterious compile errors. Check in sanity.bbclass so this failure is detected early. [ YOCTO #13573 ] (From OE-Core rev: b0efd8d4d0dbc30e6505b42f5603f18fa764d732) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base.bbclass: add dependency on pseudo from do_prepare_recipe_sysrootMattias Hansson2019-10-191-0/+1
| | | | | | | | | | | | | | | | do_prepare_recipe_sysroot may perform groupadd, which requires pseudo. However, do_prepare_recipe_sysroot does not depend on pseudo explicitly, which sometimes causes a build error when building a recipe that adds groups. This issue only occurs when executing do_prepare_recipe_sysroot for a recipe that adds groups before finishing a task that depends on pseudo for a recipe that doesn't add groups. (From OE-Core rev: 427320d7621846d57649af46bf57c88f86cac612) Signed-off-by: Mattias Hansson <mattihn@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* license_image.bbclass: check and reject packages which have incompatible ↵Alexander Kanavin2019-10-151-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | licenses The use case is setting INCOMPATIBLE_LICENSE per image, rather than as an awkward, and too strict global setting. This for example would allow building development images with gplv3 tools, but production images without them, and checking that nothing gpl3-licensed gets into the latter. Examples are provided via the selftest: four scenarios are tested: - bash is added to the image, with a default gpl3 license; this is rejected - bash is added to the image, with a "gpl3 & other" license; this is also rejected - bash is added to the image, with a "gpl3 | other" license; this is accepted, but only 'other' is added to the license manifest (this was already handled correctly previously). - bash is added to the image with a default gpl3 license, and is additionally whitelisted for that image; this is accepted. Eventually, this would allow deprecating the meta-gplv2 layer, while still enforcing the no-gpl3 rule where possible and needed. (From OE-Core rev: fd50395bc0783a3cce7b5b0d7398f22783ebbeca) Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* license.bbclass: split incompatible license check into a helper functionAlexander Kanavin2019-10-151-11/+14
| | | | | | | | | | | This would help with checking incompatible licenses at do_rootfs step in image creation, where it is beneficial to pass the license string directly to the function. (From OE-Core rev: 8a0f342e4fc33b1aa53089b1de583d45d2951476) Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* systemd.bbclass: add RMINITDIR for nativesdk buildsTrevor Gamblin2019-10-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | nativesdk builds such as nativesdk-dnf are installing systemd service files, leading bitbake to throw installed-vs-shipped warnings, but these are not needed in nativesdk: WARNING: nativesdk-dnf-4.2.2-r0 do_package: QA Issue: nativesdk-dnf: Files/directories were installed but not shipped in any package: /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/lib /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/lib/systemd /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/lib/systemd/system /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/lib/systemd/system/dnf-automatic.timer /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/lib/systemd/system/dnf-makecache.timer /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/lib/systemd/system/dnf-automatic.service /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/lib/systemd/system/dnf-makecache.service /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/lib/systemd/system/dnf-automatic-notifyonly.timer /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/lib/systemd/system/dnf-automatic-download.service /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/lib/systemd/system/dnf-automatic-download.timer /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/lib/systemd/system/dnf-automatic-notifyonly.service /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/lib/systemd/system/dnf-automatic-install.timer /usr/local/oecore-x86_64/sysroots/x86_64-oesdk-linux/lib/systemd/system/dnf-automatic-install.service Please set FILES such that these items are packaged. Alternatively if they are unneeded, avoid installing them or delete them within do_install. nativesdk-dnf: 13 installed and not shipped files. [installed-vs-shipped] Rather than have each recipe remove the files, an RMINITDIR case for nativesdk builds should be added to systemd.bbclass. (From OE-Core rev: 86092fdac2ed2935b25a6c05f16055df77a10575) Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* toolchain-scripts: export READELFRoss Burton2019-10-091-0/+1
| | | | | | | | | | | | | The readelf binary is prefixed, so export READELF in the SDKs so that the correct readelf binary can be used. This fixes problems with the symbol extractor in Meson with multilib SDKs where readelf can't be found correctly. (From OE-Core rev: 2795e3bfdefc9f48294802ea7301dae1910553dc) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* insane: add check for perllocal.podRoss Burton2019-10-081-1/+18
| | | | | | | | | | | | | | | | | | | perlocal.pod is an index file of locally installed modules and so shouldn't be installed by any distribution packages. cpan.bbclass already sets NO_PERLOCAL to stop this file being generated by most Perl recipes, but if a recipe is using MakeMaker directly (such as rrdtool) then they might not be doing this correctly. To avoid multiple packages shipping this file and then failing to install together, add a QA test to check if this file exists and by default emit an error if it does. [ YOCTO #13491 ] (From OE-Core rev: 5d16d265cc61c4e279fe3bf66016a00d9daa4068) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-devicetree.bbclass: add missing backslashMartin Jansa2019-10-081-1/+1
| | | | | | | | | | | * in oe-core commit 1860d9d3c62e2e94cd68a809385873ffd8270b6d I've accidentally removed the backshash here Reported-By: "Hilsdorf, Jan (LAWO)" <Jan.Hilsdorf@lawo.com> (From OE-Core rev: 44f0047c0268f3e9f9fdf78f93bdad9bfe491174) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rootfs-postcommands: Avoid use of an hard-coded valueAlessio Igor Bogani2019-10-021-1/+1
| | | | | | | (From OE-Core rev: 520c6f30cd571166a0d890d86b461f24f7a6998f) Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* base: Improve module import error messageRichard Purdie2019-10-021-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Turn: ERROR: Unable to parse Var <OE_IMPORTED[:=]> Traceback (most recent call last): File "Var <OE_IMPORTED[:=]>", line 1, in <module> File "/media/build1/poky/meta/classes/base.bbclass", line 35, in oe_import(d=<bb.data_smart.DataSmart object at 0x7f1d941ad208>): for toimport in oe.data.typed_value("OE_IMPORTS", d): > imported = __import__(toimport) inject(toimport.split(".", 1)[0], imported) File "/media/build1/poky/meta/lib/oe/sstatesig.py", line 267, in <module>: >class SignatureGeneratorOEEquivHash(SignatureGeneratorOEBasicHashMixIn, bb.siggen.SignatureGeneratorUniHashMixIn, bb.siggen.SignatureGeneratorBasicHash): name = "OEEquivHash" bb.data_smart.ExpansionError: Failure expanding variable OE_IMPORTED[:=], expression was ${@oe_import(d)} which triggered exception AttributeError: module 'bb.siggen' has no attribute 'SignatureGeneratorUniHashMixIn' into: ERROR: Error importing OE modules: module 'bb.siggen' has no attribute 'SignatureGeneratorUniHashMixIn' which can then trigger a version mismatch error message. (From OE-Core rev: 5b01726d1cf478aba8d1acc73e29f6cab0c9371e) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* packagegroup: fix a comment regarding PACKAGE_ARCHAndré Draszik2019-10-021-1/+1
| | | | | | | | | | | | | | | | packagegroups whose dependencies are affected by MACHINE_FEATURES need to be marked as MACHINE_ARCH *before* inheriting the packagegroup class, not after. This has changed in commit 9c826962ec8f ("packagegroup: Make allarch inherit conditional"), commit 4f3f34deafe4 in poky but the comment here wasn't updated at the time. (From OE-Core rev: 7eae2502936aa36401491cd1e0e5975db96529ae) Signed-off-by: André Draszik <andre.draszik@jci.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bash-completion: add image featureJoe Slater2019-10-022-0/+2
| | | | | | | | | | | Create bash-completion-pkgs image feature to load *-bash-completion packages into an image. The packages are created by the bash-completion bbclass but are currently never loaded. (From OE-Core rev: d47c5981877555a5a6b9aeb93ea6f3c1aa97fc44) Signed-off-by: Joe Slater <joe.slater@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* icecc: Don't use icecc when INHIBIT_DEFAULT_DEPS is setDouglas Royds2019-10-021-0/+4
| | | | | | | | | | | | We don't have a compiler, so no icecc. Silences a spew of warnings of the form: do_configure: Cannot use icecc: could not get ICECC_CC or ICECC_CXX (From OE-Core rev: 0315aabeff8e6483b737d0e23d6841f1394ad3c8) Signed-off-by: Douglas Royds <douglas.royds@taitradio.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/reproducible_build: Create SDE destinationJoshua Watt2019-10-021-0/+1
| | | | | | | | | Creates the source data epoch file destination directory when restoring from sstate (From OE-Core rev: f5259a62d444dfc221a9ba592dbca35564f794ac) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* populate_sdk_ext: Fix for hash equivRichard Purdie2019-09-301-0/+10
| | | | | | | | | Write out the hash equiv cache file into any eSDK so that it doesn't rely on having to call the hash server for the basic data requests. (From OE-Core rev: 05c6842e747261b3350d6325e238429cf8728ca0) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel.fitimage.bbclass: remove ramdisk_ctypeHeiko Schocher2019-09-271-20/+1
| | | | | | | | | | | | | | | | | | | | | | | set in the ramdisk node the compression property always to "none", as U-Boot nowadays since commit: b1307f884a91 ("fit: Support compression for non-kernel components (e.g. FDT)") decompress non kernel components. Setting compression to the used comression algorithm now, will end in fail of your kernel boot with the ramdisk. This issue is fixed since commit: bddd98573465 ("fit: Do not automatically decompress ramdisk images") which now prints a warning in U-Boot, instead of decompressing the ramdisk, but we should setup compression property correct. (From OE-Core rev: f963a51544a9a7b1abbaa87c95b3c0279847d697) Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/reproducible_build: Move SDE deploy to another directoryJoshua Watt2019-09-271-2/+10
| | | | | | | | | | | | | | | | | | | | | | | The deployment of the source date epoch file had a race condition where any task attempting to read from the file would race with creation of the sstate archive for the do_deploy_source_date_epoch task. The creation of the sstate archive requires moving the directory to a temporary location, then moving it back. This means that the file disappears for a short period of time, which will cause a failure if any other task is running and trying to open the file to get the current source date epoch. The solution is to copy the source date epoch file to a separate directory when deploying so the file never disappears. When the file is restored from sstate, it is moved to the correct location after being extracted. [YOCTO #13501] (From OE-Core rev: ac27d12fe5480e9b8cc93de6a32bf9631c52d7f4) Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/image-live.bbclass: Don't hardcode cpio.gzBöszörményi Zoltán via Openembedded-core2019-09-271-1/+1
| | | | | | | | | There's INITRAMFS_FSTYPES that can be set differently. (From OE-Core rev: 141d02400696020e83df3edcf13021fde139d261) Signed-off-by: Böszörményi Zoltán <zboszor@pr.hu> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package: Multiple shlib_providers for the same file should errorJonathan Marler2019-09-271-10/+11
| | | | | | | | | | | | | | In the case where multiple packages provide the same file, we show an error. Otherwise, python will generate a different build depending on which provider appears first in the dictionary. On my system this order changes every time I run bitbake causing intermittent build differences. Add a sorted() to fix the determinism issue too. (From OE-Core rev: 61c41369003444bfbf1c45e7cfd2752a4b7bc22f) Signed-off-by: Jonathan Marler <johnnymarler@hp.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package_rpm.bbclass: Remove a misleading bb.note()Peter Kjellerstedt2019-09-191-3/+2
| | | | | | | | | | | | | It should have been removed in 3db9d865 (classes/package_rpm.bbclass: Enhance diagnostic messages) when it was split in two new notes. Also change the casing of two other notes to align them with the other notes. (From OE-Core rev: b40e245795cd19c7d36df096fa1f30c75490ce46) Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meson.bbclass: Handle microblaze* mapping to cpu familyNathan Rossi2019-09-191-0/+2
| | | | | | | (From OE-Core rev: 01692856b8294109ac553c5c0cc23dbb5f1a8970) Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc: stop rebuilds of 2+ externalsrc recipes sharing the same git repoQuentin Schulz2019-09-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | externalsrc do_configure task watches oe-devtool-tree-sha1 file and its checksum. That file basically contains the result of `git add -A ${EXTERNALSRC} && git write-tree` which is the hash of temporary "commit" of the non committed changes. This file is stored in the .git directory of the git repo of the externalsrc recipe. do_configure then depends on the checksum of oe-devtool-tree-sha1 file. If 2+ recipes with different externalsrc paths but same git repo (e.g. one recipe at /some/path and the other at /some/path/subdir) are parsed, this oe-devtool-tree-sha1 will be overwritten by those recipes at parsing time since .git is shared between those recipes. If there is one non committed git change in /some/path but not in /some/path/subdir, the oe-devtool-tree-sha1 of both recipes will be different. What will happen is that recipe1 will watch over the oe-devtool-tree-sha1 with a specific checksum, fill in file-checksums for do_configure correctly, then recipe2 will watch over the identically named file with different content also fill in the file-checksums varflag. When do_configure of recipe1 will be evaluated for re-execution, oe-devtool-tree-sha1 will be of the value of what is watched over by recipe2, thus triggering a rebuild of recipe1. This behavior is not always reproducible which I'm guessing is due to a small window between recipe1 putting info into oe-devtool-tree-sha1 and calculating the checksum of that file and recipe2 putting its content into oe-devtool-tree-sha1. By appending the name of the recipe to oe-devtool-tree-sha1, we make sure that a recipe won't have its oe-devtool-tree-sha1 overwritten by another recipe sharing the same externalsrc git repo. (From OE-Core rev: 1b727dd7295a7a7fe17800f8038242efbf7fe2b7) Signed-off-by: Quentin Schulz <quentin.schulz@streamunlimited.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* populate_sdk_ext: Introduce mechanism to keep nativesdk* sstate in esdkJaewon Lee2019-09-191-1/+27
| | | | | | | | | | | | | | | | | | | | | | When doing a devtool build-sdk from within an esdk all nativesdk components would be rebuilt. This patch introduces SDK_INCLUDE_NATIVESDK flag to toggle the inclusion of nativesdk packages when creating the esdk sstate Currently locked-sigs.inc is generated during do_sdk_depends which doesn't pull in nativesdk packages. Generating another locked-sigs.inc in do_populate_sdk_ext and pruning it to only nativesdk* packages by using a modified version of the already existing function prune_locked_sigs and merging it with the current locked-sigs.inc Also adding SDK_INCLUDE_NATIVESDK tasklistfn to the logic surrounding setting tasklist file to not prune esdk sstate during creation [YOCTO #13261] (From OE-Core rev: d046afd12e1c209b29dca6ba402b9aa14680c5ce) Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/archiver: Fix WORKDIR for shared sourceJoshua Watt2019-09-191-2/+3
| | | | | | | | | | | | | When archiving patched source, WORKDIR should only be changed to ${ARCHIVER_WORKDIR} if the recipe doesn't use a shared work directory. This matches the behavior of do_unpack_and_patch for these recipes. This fixes kernel recipes that set S = "${WORKDIR}/git" (From OE-Core rev: e3caee8f86f2cca1d052f1f1b233018a3d4baa97) Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rootfs-postcommands: check /etc/gconf exists before working on itRoss Burton2019-09-191-2/+4
| | | | | | | | | | | | Check that /etc/gconf exists before trying to find files under it, to avoid writing find error messages to the rootfs log. Also use ${sysconfdir}/gconf instead of hardcoding /etc/gconf. (From OE-Core rev: 70a77b91031388ea29eff6b8885fd25cc35b1dae) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* report-error.bbclass: add local.conf/auto.conf into error reportChangqing Li2019-09-191-0/+15
| | | | | | | | | | | | | | | | sometimes, it is not enough to reproduce a failed build with current info on error reports web, add local.conf/auto.conf into error report to make it more easier to reproduce failed build Note: this need work together with change in repo error-report-web, which will display local.conf and auto.conf as Error Details [YOCTO #13252] (From OE-Core rev: 7adf9707c04d8ef6bcd8d8bda555687f705e6ee6) Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* live-vm-common.bbclass: provide efi population functions for live imagesDmitry Eremin-Solenikov2019-09-193-47/+36
| | | | | | | | | | Define common functions for populating EFI directories in live image by reusing common code from grub-efi and systemd-boot bbclasses. (From OE-Core rev: 3728899a0cd543793db258da0976362b4bde7133) Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin-solenikov@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* systemd-boot.bbclass: switch to image-uefi.confDmitry Eremin-Solenikov2019-09-191-11/+4
| | | | | | | | | Use variables from image-uefi.conf instead of hardcoding them in the class. (From OE-Core rev: 094c272a74b4963ea5c010b9701bb83fa799a558) Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin-solenikov@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* grub-efi.bbclass: switch to image-uefi.confDmitry Eremin-Solenikov2019-09-192-17/+4
| | | | | | | | | | Use variables from image-uefi.conf instead of hardcoding them in the class. (From OE-Core rev: 8d15c015d2498d541a6e52fc4e7553e692ff3ac5) Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin-solenikov@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove SSTATE_HASHEQUIV_SERVERJoshua Watt2019-09-181-5/+0
| | | | | | | | | | Removes all references to the SSTATE_HASHEQUIV_SERVER variable. This variable is redundant now that BB_HASHSERVE is present. (From OE-Core rev: 54b3adb6bc90a8e4b9e92952688772ee074d36e5) Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classextend.py: don't extend file for file dependencyChangqing Li2019-09-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Fix error like: lib32-e2fsprogs-1.45.3-r0 do_package_qa: QA Issue: /usr/sbin/e2scrub_all contained in package lib32-e2fsprogs-e2scrub requires /bin/bash, but no providers found in RDEPENDS_lib32-e2fsprogs-e2scrub For some lib32 packages(eg: lib32-bash, lib32-sed) which probvides files, extend is not needed Eg: RPROVIDES of lib32-bash expects to have /bin/bash, with original extend, it will become lib32-/bin/bash, then will cause above error Fix by don't extend file dependency, and skip multilib check for file dependency in do_package_qa to avoid error like: WARNING: lib32-bash-5.0-r0 do_package: QA Issue: lib32-bash package lib32-bash - suspicious values '/bin/bash /bin/sh' in RPROVIDES [multilib] (From OE-Core rev: a9163120ed52534e7dbf4db50dc2b03bbf69f06b) Signed-off-by: Changqing Li <changqing.li@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* nativesdk.bbclass: Clear out LIBCEXTENSION and ABIEXTENSIONKhem Raj2019-09-161-0/+2
| | | | | | | | | | | | These variables dont make sense for nativesdk targets which essentially are target only properties, this helps in avoiding recompile of nativesdk-libgcc-initial when switch libcs. nativesdk targets are glibc only for OE (From OE-Core rev: aff2d1264030a8061fc1b31dae0f369bfd76826b) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* icecc: blacklist pixmanTim Blechmann2019-09-161-0/+3
| | | | | | | | | | pixman declares prng_state as `omp threadprivate`, causing linker errors: prng_state: TLS reference mismatches non-TLS reference (From OE-Core rev: a95953fccc7c05650710e45103c3e9fa06d1ff4d) Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* populate_sdk_base.bbclass: nativesdk-glibc-locale is required on musl tooKhem Raj2019-09-161-1/+1
| | | | | | | | | | | | | | | | | | | musl based extensible sdk fails to install ERROR: OE-core's config sanity checker detected a potential misconfiguration. Either fix the cause of this error or at your own risk disable the checker (see sanity.conf). Following is the list of potential problems / advisories: Your system needs to support the en_US.UTF-8 locale. The real reason is that its missing locale-archive in buildtools-tarball hence python3 from buildtools-tarball fails to run bitbake when installing esdk (From OE-Core rev: c6e8e13f910544b2a4435d8b9e6dbc65847ef182) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* chrpath.bbclass: Add break_hardlinks kwarg to allow breaking hardlinksNathan Rossi2019-09-111-6/+13
| | | | | | | | | | | Add the break_hardlinks kwarg to break hardlinks when modifying files. This uses the bb.utils.break_hardlinks function to break hardlinks. The default is to maintain existing behaviour and leave hardlinks in place. (From OE-Core rev: 7628f6bdb5704c018d83e284364994b72557eaa5) Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* python3native, pythonnative: export PYTHON_LIBRARY and PYTHON_INCLUDE_DIRKhem Raj2019-09-072-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | packages can use find_package(PythonInterp REQUIRED) find_package(PythonLibs REQUIRED) while we control PYTHON pointing to native py3 the libs and include directories will then point to build host version, which can result in unexpected combination and if we are lucky we get errors if its quite different e.g. py2 libs/includes and py3 executable This variable can be then used to export PYTHON_LIBRARY and PYTHON_INCLUDE_DIR so that above find_packages can work correctly see [1] for how it happens in cmake LLDB uses it see [2] [1] https://github.com/Kitware/CMake/blob/master/Modules/FindPythonLibs.cmake [2] https://github.com/llvm/llvm-project/blob/master/lldb/cmake/modules/LLDBConfig.cmake#L226 (From OE-Core rev: e45c06fe6f9a21c2cd06ae003cb112556382f81e) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Revert "kernel.bbclass: adjust a condition checking"Jason Wessel2019-09-061-2/+4
| | | | | | | | | | | | | | | | | | | This reverts commit 6676411fccff2d331878e4ca1f9411aafb056a80. This revert restores the original code and adds a comment. The commit that was reverted broke a number of wic templates and tools which rely on the initramfs creation dependency and the case where the INITRAMFS_IMAGE_BUNDLE is not set. If an end user does not want the INITRAMFS_IMAGE generated, it should be set to "". [ Issue: LIN1019-1791 ] (From OE-Core rev: ab61a11623ac0a25ba1c98d686c79815abab573f) Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* autotools: always include config_site.d files in CONFIG_SITEDan Callaghan2019-09-061-2/+5
| | | | | | | | | | Fixes: https://bugzilla.yoctoproject.org/show_bug.cgi?id=13375 (From OE-Core rev: e60c170b451a4aa561d08bfce97dca05508c2106) Signed-off-by: Dan Callaghan <dan.callaghan@opengear.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package.bbclass: allow shell-style wildcards in PRIVATE_LIBSAlexander Kanavin2019-09-061-2/+4
| | | | | | | | | | | | | | | | PRIVATE_LIBS is used to exclude 'private' libraries from getting added to automatic runtime dependency resolution. This variable currently has to list all libraries by name, which becomes a maintenance issue if the list of such libraries frequently changes, or is very large. This change allows using shell-style wildcards in the variable, similar to how FILES lists what gets packaged. (From OE-Core rev: 732db32714c208d8eeeb90308926dc886ef7b791) Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* archiver.bbclass: Do not archive srpm's if there are no package tasksNathan Rossi2019-09-061-6/+8
| | | | | | | | | | Do not attempt to archive recipes which have no packaging tasks (e.g. inherits nopackages). (From OE-Core rev: 8618425e3f5a095a4fd409029c46e770c9526eee) Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Clean up remnants of glibc-initialNathan Rossi2019-09-061-1/+1
| | | | | | | | | Remove remnants of the glibc-initial recipe. (From OE-Core rev: 332b1e21db3e0cbeeb14f12dd6aeedb89b76d761) Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rm_work: Remove redundant 'after' in addtask statementJacob Kroon2019-09-031-1/+1
| | | | | | | | | Introduced in commit b3de5d5795767a4b8c331fa5040166e7e410eeec. (From OE-Core rev: bad3918467cc979f278a70a00e828704ef885fd4) Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* image.bbclass: Fix debug output for rootfs sizeDaniel Klauer2019-09-011-1/+1
| | | | | | | | | The debug output showed the wrong variable. (From OE-Core rev: 9b404c24ddc6212576b78c9fc56c57baa0fb3745) Signed-off-by: Daniel Klauer <daniel.klauer@gin.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rootfs-postcommands.bbclass: add inittab tweak to read_only_rootfs_hook()Andre McCurdy2019-08-281-0/+5
| | | | | | | | | | | It's not clear that we actually need to call mount -o remount,XX from the busybox-inittab inittab at all, but as we currently do, let's respect read-only-rootfs in IMAGE_FEATURES and not remount / as rw. (From OE-Core rev: 8840a831d47a94f36bb2e173164dbaf9b955e809) Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* icecc: blacklist systemtapTim Blechmann2019-08-281-0/+3
| | | | | | | | | | | | compiling systemtap with icecc causes the following build failure > build/tmp/work/silvermont-64-poky-linux/systemtap/4.0-r0/recipe-sysroot/usr/include/python3.7m/modsupport.h:120:66: note: in definition of macro 'PyModule_AddIntMacro' > HelperSDT/_HelperSDT.c:145:34: error: 'PyTrace_RETURN' undeclared (first use in this function); did you mean 'PyTrace_C_RETURN'? (From OE-Core rev: 66719424096eb0d3470647579364efe1556dc7b6) Signed-off-by: Tim Blechmann <tim@klingt.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libc-package.bbclass: Split locale hard link processing into two partsJason Wessel2019-08-211-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The locale-processing in cross-localedef was proven to be unsafe to run in parallel due to the way it tried to make hard links to files that could disappear before the link operation was completed. To avoid corruption of the pseudo database, and create a deterministically generated link tree, the operation of the locale generation and the hard link resolution have been split into two separate parts. A side effect of this change is that the do_package() rule for glibc-locale will be slightly smaller because some of the hard links were missed in the past, particularly if you had a lot of cpus free to perform the work. Before the patch: % du -sk locale-tree 312524 locale-tree With the patch: % du -sk locale-tree 290772 locale-tree A number of comparisons were performed such as diffing the output, cross checking the link references using tar's listing output, and comparing against the results with out a parallel build to ensure the locale-tree is correct in its final form. [YOCTO #11299] [YOCTO #12434] (From OE-Core rev: 93d935927dd0ec0fa6f0a80a71236a7b00a5d1a4) Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package: Fix race between do_package and do_packagedataRichard Purdie2019-08-211-3/+7
| | | | | | | | | | | | | | | | do_package has PKGDESTWORK as a cleandir and do_packagedata has it as an sstate-input dir. This means do_package wipes out the directory at both do_package and do_package_setscene. do_package_setscene and do_packagedata_setscene can run in parallel when installing from sstate which means they can wipe out parts of each other leading to interesting build failures. We therefore have to add in a hardlink copy so that the directories can work independently of each other. (From OE-Core rev: 692b2046bb60806ee6bbde6ba15bd1637b00efb1) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* systemd.bbclass: Limit rm_sysvinit_initddir and rm_systemd_unitdir to target ↵Khem Raj2019-08-211-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | alone These postfuncs cause native recipes to rebuild when changing system init provider between sysvinit and systemd. Some of these native recipes are pretty early in dependency chain ( e.g. util-linux ) which can casue rebuild of pretty much everything including compiler. Found with bitbake-diffsigs Hash for dependent task python/python3_3.7.4.bb:do_prepare_recipe_sysroot:virtual:native:/mnt/a/yoe/sources/openembedded-core/meta/recipes-devt ools/python/python3_3.7.4.bb changed from 2a45fe0cd0d3640a88c4a5c8b1880c4e9a089cc7446a91d2a920c1cef6fa916a to bc2a0921cce50da1b7be3b59a3d8211ec 2a31262493ffa5909acbb7116fad3bf Hash for dependent task util-linux/util-linux_2.34.bb:do_populate_sysroot:virtual:native:/mnt/a/yoe/sources/openembedded-core/meta/recipes- core/util-linux/util-linux_2.34.bb changed from 15d6e165f025f10c2c455df8a875cafe021eaed4214c793e708d4827a58ca89d to 54e542d5da99cacfc9290ef5d27 9de50bdcb9195f67ae6dfff59fe41d10f7bd2 Hash for dependent task util-linux/util-linux_2.34.bb:do_install:virtual:native:/mnt/a/yoe/sources/openembedded-core/meta/recipes-core/ util-linux/util-linux_2.34.bb changed from e25b1119ce8dd7ca43fbd2db771e04fa6ff6b9d701fd78ac6c443224b036ed9f to bb5b172a83e7edd272402a9dcd80c4e1 29aa1ecb824c2cfa388086cfed24fef5 basehash changed from 62df6610eab9c1b1a17d7132943507641c8538690f26186843c86144d4598e64 to 80471f7c0bded9d1b593da69708b0e0f10882db08 5e1bf769edb3018e6c744d0 Variable rm_sysvinit_initddir value changed: @@ -11,4 +11,4 @@ shutil.rmtree(sysv_initddir) DISTRO_FEATURES{systemd} = Unset -DISTRO_FEATURES{sysvinit} = Set +DISTRO_FEATURES{sysvinit} = Unset (From OE-Core rev: f2d60e0f6a8e93cb0779f4719e58b99ad01fb954) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* uboot: fixes to uboot-extlinux-config attribute valuesWill Page2019-08-141-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | The way this class uses overrides to support generation of multiple sections is subject to two different issues: 1) labels that conflict with existing override names causing the value for the conflicting label to be set for all labels, and 2) reusing the override list through each iteration, prepending each new label to the list of overrides makes earlier labels' value take precedence over later labels, making later labels virtually impossible to customize. The first issue is resolved by removing all label names from overrides before iterating over labels. The second issue is resolved by generating a fresh list of overrides with only the current label added. The current label is also appended to the list of overrides instead of prepended, which makes it the highest priority override. This is matches the behavior of devtool-source.bbclass, which similarly monkey-patches overrides. Closes https://bugzilla.yoctoproject.org/show_bug.cgi?id=13469 . (From OE-Core rev: 42b44fdd9e63b8d39cf83baecec08328275558ff) Signed-off-by: Will Page <wpage@polysync.io> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linuxloader: Add entries for riscv64Khem Raj2019-08-141-0/+4
| | | | | | | (From OE-Core rev: 1cd6ffcabea2036fde6493f75687e546c6fe003c) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-16 02:51:17 +0000