summaryrefslogtreecommitdiffstats
path: root/meta/classes
Commit message (Collapse)AuthorAgeFilesLines
* staging: Drop unused SYSROOT_LOCKRichard Purdie2017-01-111-1/+0
| | | | | | | | | | | | | This hasn't been used in years and isn't referenced anywhere, drop the definition. (From OE-Core rev: 68258f856f08f35813964e58ef761471e29373ad) (From OE-Core rev: b8b261d2e40457ee2e0cf1e8f40bd22230eb8ca7) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-yocto: exit on non-zero return codeBruce Ashfield2017-01-111-1/+0
| | | | | | | | | | | | | | | | | | | | Historically the processing of kernel meta data contained some commands that exited with a non-zero return code. Special processing was required to properly deal with their exit. That is no longer true, and instead of handling all return codes and doing an explicit 'exit' call, we can remove set -e from the routine and have all errors be trapped and stop processing. (From OE-Core rev: 476ffd57cf5b6fba40d4e3f5dd913824ab8a8d3d) (From OE-Core rev: 620c74336dad517037fcf26c8f7bf8c013b213c1) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* systemd.bbclass: don't block on service restartMark Asselstine2017-01-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current class works fine when a recipe uses SYSTEMD_AUTO_ENABLE 'enable' and has no on device pkg_postinst(), ie when the postinst is run as part of rootfs creation. However, when there is a component of pkg_postinst() that is run on device the 'systemctl restart' is run as part of the run_postinsts.service at boot. This results in the boot spinning indefinitely with: [ *** ] A start job is running for Run pending postinsts (7s / no limit) The issue could potentially be that the packages service has an 'After' clause which comes later in the boot, beyond run_postinsts.service, creating a chicken before the egg scenario. Even service files without an 'After' clause cause this situation however. Despite this not being the cause of the issue this fix will prevent this scenario from happenning. Using strace we are able to find that during boot, when run_postinsts.service is running attempting to start or restart any service will result in the call get stuck on poll(). Since the run_postinsts.service does not monitor the outcome of the call to restart we can work around this by using '--no-block'. (From OE-Core rev: 6ad6a0084a73088fc2a27ab9958e5c46d6e094fc) (From OE-Core rev: caad8aa89f9815a278e39296497596996a35fe95) Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* insane: rewrite the expanded-d test as a QAPKGTESTRoss Burton2017-01-111-19/+13
| | | | | | | | | | | | | | | | | Instead of being executed for every file in every package, this is now just called for each package. It is also now correctly called for packages which don't have any content but do have postinst scripts. [ YOCTO #10711 ] (From OE-Core rev: afda72b2424528eaff9054327530bdf5654bec66) (From OE-Core rev: b653bfb800a470894ec93c8bb4acd12a143716a6) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* insane: add QAPKGTEST, a package-wide equivilant to QAPATHTESTRoss Burton2017-01-111-0/+20
| | | | | | | | | | | | | | | | QAPATHTEST defines a function that is executed for every file in every package. For tests which just need to look at the datastore this is massive overkill. Add QAPKGTEST, which is invoked for each package in the recipe. (From OE-Core rev: acc3cc26099c77e4eeb44c75bc7167ab58ef1147) (From OE-Core rev: e7751fa0bdb5bc9b217a0bf267a9c658bec997fa) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* insane: factor out the test matrix processingRoss Burton2017-01-111-21/+25
| | | | | | | | | | | | | Pull the test matrix processing out as a function so it can be reused. (From OE-Core rev: 3caccd3f6079b7e284d32e1eb0217107425e7bf8) (From OE-Core rev: 3b21c285d4ff08ae6f613700c5936e39e7e3051d) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* insane: fix expanded-d testRoss Burton2017-01-111-2/+1
| | | | | | | | | | | | | | | This test should be looking for the expanded value of ${D} in the expanded value of pkg_postinst and so on, but one of the getVar() calls was passing expand=False so the test would never be true. (From OE-Core rev: cc545044cba51317bee32e3bf674723e422e3a8a) (From OE-Core rev: 9d4f094a7c9cbff0d3db5f339d084b2b7c70df86) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* insane: Add aarch64 baremetal mappings to the QA arch testAlexandre Belloni2017-01-111-0/+2
| | | | | | | | | | | | | | | Add mappings for aarch64-elf and aarch64_be-elf to binary lookup table which allows for the generation of baremetal toolchains. (From OE-Core rev: e90a1c4b8fd7baa738eb4683e5eac60905e04296) (From OE-Core rev: 9a8a4fe56901f88f143e86652edc7039345d49fc) Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* conf: add C++ flags for uninative interoperatilityRoss Burton2017-01-111-11/+0
| | | | | | | | | | | | | | | | | | | | | Create a common include file for compiler flags which allow native binaries to be interoperable on a wide range of hosts. In particular the C++ ABI is problematic so choose the CXX11 version to allow interoperation between gcc4 and gcc5 based hosts. Moving this to a common include instead of uninative.bbclass allows uninative to be configured later and used in the eSDK (where its mandatory) even if the base configuration doesn't enable uninative by default (e.g. nodistro in OE-Core). [ YOCTO #10645 ] (From OE-Core rev: 60c912ae9306532bdd4c5e09a65863ee77c12f43) (From OE-Core rev: 10dea25aac31c156350e3e73f937472404c22d81) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cmake.bbclass: Set CXXFLAGS and CFLAGSKhem Raj2017-01-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We strip the TOOLCHAIN_OPTIONS and HOST_CC_ARCH from CC/CXX in cmake.bbclass whereas CFLAFS and CXXFLAGS assume that TOOLCHAIN_OPTIONS are part of CC/CXX variables, this causes compile failures when cmake is running compiler tests during configure on some architectures especially armhf, because hf ABI information -mfloat-abi is part of TOOLCHAIN_OPTIONS, so what happens is that testcase gets compiled without hard-float, howver, during linking the float ABI option is passed via LDFLAGS, now linker rejects this and fails like /mnt/a/build/tmp-glibc/sysroots/x86_64-linux/usr/libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/6.2.0/ld: error: cmTC_27947 uses VFP register arguments, CMakeFiles/cmTC_27947.dir/src.cxx.o does not mnt/a/build/tmp-glibc/sysroots/x86_64-linux/usr/libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/6.2.0/ld: failed to merge target specific data of file CMakeFiles/cmTC_27947.dir/src.cxx.o collect2: error: ld returned 1 exit status This means that CMake now fails the configure time test too which is not right, e.g. it might disable features which actually do exist and should be enabled e.g. in case above it is resulting as below Performing C++ SOURCE FILE Test HAS_BUILTIN_SYNC_SUB_AND_FETCH failed with the following output: Its actually a bug in CMake see https://gitlab.kitware.com/cmake/cmake/issues/16421 CMake is ignoring CMAKE_CXX_FLAGS when using CHECK_CXX_SOURCE_COMPILES function. Until it is fixed upstream, we add HOST_CC_ARCH and TOOLCHAIN_OPTIONS to CFLAGS and CXXFLAGS, so that we can ensure that compiler invocation remains consistent. (From OE-Core rev: 826f3cdb474b5728b22f08d2342fc90235ca9e7d) (From OE-Core rev: 7e5fd5914e15397a56425130c2322ace67da2ee4) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cve-check.bbclass: CVE-2014-2524 / readline v5.2André Draszik2017-01-111-1/+1
| | | | | | | | | | | | | | | | | | | | | Contrary to the CVE report, the vulnerable trace functions don't exist in readline v5.2 (which we keep for GPLv2+ purposes), they were added in readline v6.0 only - let's whitelist that CVE in order to avoid false positives. See also the discussion in https://patchwork.openembedded.org/patch/81765/ (From OE-Core rev: b881a288eec598002685f68da80a24e0478fa496) (From OE-Core rev: b4498a6b734661fdfe3ff4e0a9850e796b72005c) Signed-off-by: André Draszik <adraszik@tycoint.com> Reviewed-by: Lukasz Nowak <lnowak@tycoint.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rm_work: Ensure we don't remove sigbasedata filesRichard Purdie2016-11-161-1/+1
| | | | | | | | | | | We don't remove sigdata files, we also shouldn't remove sigbasedata files as this hinders debugging. (From OE-Core rev: 988349f90c8dc5498b1f08f71e99b13e928a0fd0) (From OE-Core rev: c8d96b10ee3bc2eae0fd269d2564286fd0bc82ed) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sstate: Ensure we don't remove sigbasedata filesRichard Purdie2016-11-161-1/+1
| | | | | | | | | | | We don't remove sigdata files, we also shouldn't remove sigbasedata files as this hinders debugging. (From OE-Core rev: 1ebd85f8dfe45b92c0137547c05e013e340f9cec) (From OE-Core rev: 3764a5ce8a1f26b46c389c256c10596ed8d31cc7) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/populate_sdk_ext: prevent invalid TEMPLATECONF entering eSDKPaul Eggleton2016-11-161-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | If you are using a repository which contains a .templateconf file that sets TEMPLATECONF to point into a layer it contains, but you aren't using that layer in your bblayers.conf, the eSDK would produce an error during the preparation step of the installation. An example would be using the poky repository but setting DISTRO to your own custom distro and removing meta-poky from your bblayers.conf. The eSDK doesn't support creating new build directories, so we don't care about the templates and can thus force a known good value to prevent this from happening. Fixes [YOCTO #10568]. (From OE-Core rev: 5ee32191a18013061dfa72e64713a94c5d321496) (From OE-Core rev: 7fbc086f47ef6e36c819836deaa1b2fb3f0ec97a) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* testsdk.bbclass: Clean up comments, clarify image choices.Robert P. J. Day2016-11-161-6/+8
| | | | | | | | | | | | | | Make it clear that SDK testing can use any valid image. (From OE-Core rev: d190c69347921a626665a53469dcf99b3c86994b) (From OE-Core rev: 7c16202e8c532f4d6ae78ac4bd324f7d975e8a76) Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* insane.bbclass:buildpaths: open() file with 'rb'Robert Yang2016-11-161-2/+2
| | | | | | | | | | | | | | | | | | | open() is default to 'rt' which may cause decoding errors when open binary file: $ bitbake xcursor-transparent-theme [snip] Exception: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xfd in position 18: invalid start byte [snip] (From OE-Core rev: ddbab61f47efd9b4fde38ef8f0f3482c78abe37c) (From OE-Core rev: 8364558a2904d21c9b31d29bfb8f2d9cbeac8659) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/nativesdk: set SDK_OLDEST_KERNEL appropriatelyPaul Eggleton2016-11-162-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | SDK_OLDEST_KERNEL currently only controls the check on SDK installation, however as with OLDEST_KERNEL it should be controlling the OLDEST_KERNEL value for building glibc used in the SDK. Thus, set it in nativesdk.bbclass. This means we need to move the default to bitbake.conf so that it can be seen in both places. Also set a more reasonable default for SDK_OLDEST_KERNEL for x86/x86-64 as glibc 2.24 still supports back to 2.6.32 there and there are still people wanting to build SDKs that will install on older distros (e.g. CentOS 6). However it's not possible to set this with overrides since there aren't any for the SDK_ARCH, however we can instead set the variable from conf files in conf/machine-sdk especially as there is now a soft default for SDKMACHINE. Fixes [YOCTO #10561]. (From OE-Core rev: 42d5781e31c5bf76b5b7e27abed4f6f3fd65bf40) (From OE-Core rev: e02aa8e8b62eae0f83beca850466408dd060b248) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/populate_sdk_base: fix usage of & character in SDK_TITLEPaul Eggleton2016-11-161-1/+1
| | | | | | | | | | | | | | | | | If you used an & character in SDK_TITLE (possibly indirectly from DISTRO_NAME) then sed interpreted this as a directive to paste in the replaced string (@SDK_TITLE@ in this case). Escape any & characters in SDK_TITLE to avoid that. (From OE-Core rev: acb85689c13cfdac21435509001048af5c3a7e99) (From OE-Core rev: bbad3402d431ac178cabdc00fcaf37b3a1a6bfd6) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* uboot-sign: fix do_concat_dtb for .img, .romGeorge McCollister2016-11-161-2/+2
| | | | | | | | | | | | | | | Now that out of tree building is enabled, ${B} must be used instead of ${S} as the path for UBOOT_BINARY. (From OE-Core rev: 1fe17c52e4d7ce1b9d69aaa2cd9d4b351a4b2603) (From OE-Core rev: 87705ab8f7224dbc1f397f9c388260a6370a06d9) Signed-off-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/license: fix handling of symlinks pointed to in LIC_FILES_CHKSUMPaul Eggleton2016-11-161-0/+2
| | | | | | | | | | | | | | | | | | | | | | If you set LIC_FILES_CHKSUM to point to a relative symlink then you'll get "Could not copy license file" warnings in copy_license_files() since the symlink won't be valid after it's copied. If the source is a symlink then we need to dereference it first. I encountered this when I used recipetool on the sources for capnproto, where the c++ directory contains a LICENSE.txt symlink to the LICENSE file in the parent directory, and this symlink ends up being pointed to in LIC_FILES_CHKSUM. (From OE-Core rev: c4d3b1e9c37b920444e53d3231552da18d101882) (From OE-Core rev: 650ddf1d8b687845099a8ac463c3a550a7965095) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Armin Kuster <akuster808@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* image_types: Use softer setting of WKS_FILESaul Wold2016-10-251-1/+1
| | | | | | | | | | | This will allow for more flexibility and overrides in BSP layers. (From OE-Core rev: 1886ab2f1dc1e3b5758a85604998e8deb9198f5e) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* buildstats: check IMAGE_ROOTFS exists before checking its sizeMikko Ylinen2016-10-251-6/+7
| | | | | | | | | | | | | | | | | | After 0d6b7276003f1afabc6de683f663540327d52bdc, the exceptions are correctly checked if the rootfs size check fails. In case of a failure a build error is triggered. However, there are cases where this is known to fail (e.g., with meta-swupd the rootfs for swupd images is other than IMAGE_ROOTFS). Because of that, check IMAGE_ROOTFS exists before trying to get the size of it. Also, in case of any error catched as err, simply print out a warning. (From OE-Core rev: b4929542ff01a24bea5edd1c40e3174f55e213ff) Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* insane.bbclass: fix package_qa_check_arch() for mips64-o32Robert Yang2016-10-151-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed: MACHINE = "qemumips64" DEFAULTTUNE = "mips64-o32" $ bitbake linux-yocto ERROR: linux-yocto-4.8+gitAUTOINC+03bf3dd731_674818dad5-r0 do_package_qa: QA Issue: Bit size did not match (32 to 64) linux-yocto on /work/qemumips64-poky-linux/linux-yocto/4.8+gitAUTOINC+03bf3dd731_674818dad5-r0/packages-split/kernel-module-parport/lib/modules/4.8.0-yocto-standard/kernel/drivers/parport/parport.ko [arch] The mips64-n32 works since it would set ABIEXTENSION to "n32" so that TARGET_OS is linux-gnun32, and it will skip the check, but "mips64-o32" doesn't set ABIEXTENSION to "o32", "n32" or "32", so the error happend. Skip the check if mips64.*32 matches DEFAULTTUNE can fix the problem. Another way to fix the problem is define ABIEXTENSION to "o32" or "32" for mips64-o32, but that may make things confused since "o32" is purely 32 bit. [YOCTO #10305] (From OE-Core rev: 4e61d8d6f4619dbfaeb5ca642449de7cf4b3e92d) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* populate_sdk_ext: explicitly set DL_DIRRoss Burton2016-10-151-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | The eSDK generation assumes that DL_DIR is downloads/ under the build directory, and puts files such as a freshly buily uninative tarball in there expecting bitbake will find it later. Whilst ${TOPDIR}/downloads/ is in fact the default value for DL_DIR in bitbake.conf, and any instances of DL_DIR are removed from the original local.conf, there is still the possibility that other layers could contain a site.conf that assigns DL_DIR. If this happens the errors are quite mysterious as it fails to find the uninative tarball and so the hashes all change, and eSDK building fails. Ensure that this cannot happen by explicitly assigning the DL_DIR that we require, instead of assuming that the default value will be used. [ YOCTO #10439 ] (From OE-Core rev: bc2e6f5eab47e869dbc4a3eacfe759b9b1cacaee) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* live-vm-common.bbclass: Allow to use different kernel image than ↵Martin Jansa2016-10-151-2/+6
| | | | | | | | | | | | | | KERNEL_IMAGETYPE for /vmlinuz * syslinux config hardcodes kernel image as /vmlinuz add warning message when the selected image doesn't exist and allow to select different image with VM_DEFAULT_KERNEL variable (qemuboot.bbclass is using QB_DEFAULT_KERNEL) (From OE-Core rev: e6b21d1b3716ee6f4aec1674e56f06b2963a7968) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* image_types.bbclass: add dependency do_image_wic -> do_bootimgEd Bartosh2016-10-151-0/+5
| | | | | | | | | | | | | | | | | | To produce certain types of images wic uses do_bootimg results to assemble final image. For example, it copies BOOT/EFI directory produced by do_bootimg to boot partition for every EFI image. The tricky part of this is that do_bootimg task is not always run, so we can't always make do_image_wic depend on do_bootimg. We only need to do it if do_bootimg present in task graph. Thank to Cristopher Larson for this fix. (From OE-Core rev: 1a961b4becf677c9eb07c5b24a8ddb75044663d1) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package_tar: avoid chdir warnings and restore cwd after packagingRobert Yang2016-10-151-0/+5
| | | | | | | | | | | Fixed: WARNING: attr-2.4.47-r0 do_package_write_tar: Task do_package_tar changed cwd to /path/to/attr/2.4.47-r0/packages-split/attr-locale-sv (From OE-Core rev: 3753d07c9ff33b9a97aca61ad312b0e283c4c68d) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* insane.bbclass: Additional "mips" and "mipsel" machine definitionsJuro Bystricky2016-10-151-0/+2
| | | | | | | | | | | | | | Add "mips" and "mipsel" to "machdata" table. Although there is a way to add entries to the "machdata" table from a BSP without modifying the insane.bbclass directly, MIPS is already supported in poky and as such the relevant entries should be present in insane.bbclass. (From OE-Core rev: 3ba03d1affa6f647e9a03c8ba4389606a0da8e8b) Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-arch.bbclass: Add xtensa and arc into valid_archs tableJuro Bystricky2016-10-151-1/+1
| | | | | | | | | | | Both "arc" and "xtensa" are valid Linux architectures, add them into valid_archs table. (From OE-Core rev: 20d511cd1b7fe4891f7842be12f13a92da433c46) Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* pixbufcache: handle gdk-pixbuf not being presentRoss Burton2016-10-151-2/+4
| | | | | | | | | | | | | | | | | | | | | | It's possible - albeit unlikely - that gdk-pixbuf isn't present in the sysroot when a recipe inheriting this class is and the sysroot is finalised. One example would be if the sstate archive has librsvg but not gdk-pixbuf: librsvg will be extracted from the sstate but gdk-pixbuf will be built to "fill in the gap". In this situation the setscene completion hook installed by pixbufcache.bbclass will attempt to execute gdk-pixbuf-query-loaders, but that binary hasn't been installed by gdk-pixbuf yet. Also add gdk-pixbuf-native to DEPENDS in native builds to ensure that the binaries we expect will be present, as it's possible to build loaders without linking to GdkPixbuf. [ YOCTO #10420 ] (From OE-Core rev: 03cdb3366ded46cd760656e4cda0be37c1f82109) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove RM_OLD_IMAGE, it's no longer usefulJoshua Lock2016-10-155-20/+1
| | | | | | | | | | | | | | | | Since the move to put image deployment under sstate control in d54339d4b1a7e884de636f6325ca60409ebd95ff old images are automatically removed before a new image is deployed (the default behaviour of the sstate logic). RM_OLD_IMAGE is therefore no longer required to provide this behaviour, remove the variable and its users. (From OE-Core rev: 93631befe8b962bf99524746b49f4ebca336175c) Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/externalsrc: re-run do_configure when configure files changePaul Eggleton2016-10-113-0/+26
| | | | | | | | | | | | | | | | | | If the user modifies files such as CMakeLists.txt in the case of cmake, we want do_configure to re-run so that those changes can take effect. In order to accomplish that, have a variable CONFIGURE_FILES which specifies a list of files that will be put into do_configure's checksum (either full paths, or just filenames which will be searched for in the entire source tree). CONFIGURE_FILES then just needs to be set appropriately depending on what do_configure is doing; for now I've set this for autotools and cmake which are the most common cases. Fixes [YOCTO #7617]. (From OE-Core rev: 923fc20c2862a6d75f949082c9f6532ab7e2d2cd) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* update-rc.d.bbclass: ignore init script return codeMarkus Lehtonen2016-10-111-2/+2
| | | | | | | | | | | | | | | | | We need to ignore the return code from the init script 'stop' command in the preinst and prerm scriptlets. Otherwise package upgrade or deinstallation (at least when opkg is used) is likely to fail if the daemon is not running. That is because an init script possibly returns '1' if you try to stop a service that is not running which, in turn, causes the scriptlet to fail which, in turn, causes the package (de-)installation to fail. [YOCTO #10299] (From OE-Core rev: daa3c266a7ffa060b52381fa00df518102fceda8) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* insane: display names instead of ELF machine numbersRoss Burton2016-10-111-2/+2
| | | | | | | | | | | The 'arch' QA test currently simply outputs the ELF machine field as a number which isn't helpful. Display this as a human-readable name to make it clearer to the user what the problem is. (From OE-Core rev: 607a2a1de4b77818c3e801a4de7ff0888229e036) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* archiver: fix gcc-source handlingSaul Wold2016-10-111-2/+3
| | | | | | | | | | | | | The source archiver was not handling the gcc-source target correctly, since it uses the work-shared directory, we don't want to unpack and patch it twice, just as the comments say, but the code was not there to check for the gcc-source target. [YOCTO #10265] (From OE-Core rev: bbac0699ceadb7a25a60643fb23dffce8b4d23d0) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* testimage: disable build tests for qemumips and qemumips64Joshua Lock2016-10-091-0/+6
| | | | | | | | | | | | | | | | | It's not uncommon for qemumips[64] builds on the Yocto Project autobuilder to fail during Sanity Tests after a very long timeout period. This is due to the MIPS emulation in QEMU being slow and some of the build tests taking a very long time on MIPS machines. This patch works around this slowness by disabling the more complex build tests for QEMU MIPS machines. [YOCTO #10340] (From OE-Core rev: 4a1c04c0d509b2cda9b2ccd5a80523c05fa279c6) Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* update-rc.d.bbclass: check that init script is executable before running itMarkus Lehtonen2016-10-071-1/+1
| | | | | | | | | | | | | Check that the init script that is going to be called in the prerm() script really exists and is executable. There might be a packaging bug or the script might've been removed already earlier in prerm(). [YOCTO #10299] (From OE-Core rev: aabb87c9dbd60fe9467ca0354ec05c275a3f1b1a) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/populate_sdk_ext: add symlinks and unfsd to support Eclipse pluginPaul Eggleton2016-10-071-2/+12
| | | | | | | | | | | | | | The Yocto Project Eclipse plugin requires that runqemu and unfsd are accessible within the SDK, and indeed the standard SDK has these. This turns out to be fairly easy to do - we just need to add unfsd and symlink it, runqemu and a few other scripts into the SDK's bin directory. Fixes [YOCTO #10214]. (From OE-Core rev: 9007e0e3fce7e09b043fead54b17f69c1661d162) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/uboot-extlinux-config: Add classFabio Berton2016-10-071-0/+126
| | | | | | | | | | | | | | | | | | | | | | This class allow the extlinux.conf generation for U-Boot use. The U-Boot support for it is given to allow the Generic Distribution Configuration specification use by OpenEmbedded-based products. This class can be inherited by u-boot recipes to create extlinux.conf and boot using menu options. U-boot with extlinux support is machine dependent, so to use this class you need to set UBOOT_EXTLINUX to 1 in machine configuration file and also set root= kernel cmdline UBOOT_EXTLINUX_ROOT. This variable is used to pass root kernel cmdline, e.g: UBOOT_EXTLINUX_ROOT = "root=/dev/mmcblk2p2" (From OE-Core rev: 7c18abeb2a6ef8b7bb53aa92a9ee76bd465fada2) Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linuxloader.bbclass: Adjust mips to cover all mips/mips64Mark Hatle2016-10-071-1/+4
| | | | | | | | | | | | | | | | [YOCTO #10389] Use a glob (*) to match all mips (not previously matched). This will ensure that the linuxloader is properly returned for mips, mipsel, mips64, mips64el and their n32 variants. See: https://sourceware.org/glibc/wiki/ABIList#mips for the official list of loaders. (From OE-Core rev: b90d68fda3d14b4d19b7ffcb5b80ed28563a616d) Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* siteinfo.bbclass: Add mipsisa{32, 64}r6{el, } supportZubair Lutfullah Kakakhel2016-10-071-0/+4
| | | | | | | | | Add support for MIPS Release 6 ISA (From OE-Core rev: fcb67508be00cdd22181d6c9e4c3d29dfa578b45) Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linuxloader.bbclass: Add mipsisa{32, 64}r6{el, } supportZubair Lutfullah Kakakhel2016-10-071-0/+3
| | | | | | | | | | | | | Add support for MIPS Release 6 ISA. The loader is located at a new place for multiarch. For more details, check https://wiki.debian.org/Multiarch and https://sourceware.org/glibc/wiki/ABIList#mips (From OE-Core rev: 27537d146f3f143b06819102c348c8914287ec8e) Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libc-package.bbclass: Add mipsisa{32, 64}r6{el, } supportZubair Lutfullah Kakakhel2016-10-071-0/+4
| | | | | | | | | Add support for MIPS Release 6 ISA (From OE-Core rev: 8e098ddb656d39c56427ad45e0fa429b8f0153f5) Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-arch.bbclass: Add mipsisa{32, 64}r6{el, } supportZubair Lutfullah Kakakhel2016-10-071-1/+1
| | | | | | | | | Add support for MIPS Release 6 ISA (From OE-Core rev: aecb57f2fd65a1bfbc2e9a23fba4984d44055c4c) Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* insane.bbclass: Add mipsisa{32, 64}r6{el, }Zubair Lutfullah Kakakhel2016-10-071-0/+4
| | | | | | | | | Add support for MIPS release 6 of the ISA (From OE-Core rev: 6613ee0155de1e0afd30cd8d8290eda3f7486337) Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* utils.bbclass: add function to check for git config userStephano Cetola2016-10-073-9/+19
| | | | | | | | | | | | | | | | | | | | | | If attempting to patch a git repo without a proper git config setup, an error will occur saying user.name/user.email are needed by git am/apply. After some code was removed from kernel-yocto, it was simple enough to reproduce this error by creating a kernel patch and using a container to build. This patch abstracts out functionality that existed in buildhistory for use in other classes. It also adds a call to this functionality to the kernel-yocto class. Fixes [YOCTO #10346] introduced in OE-core revision 0f698dfd1c8bbc0d53ae7977e26685a7a3df52a3 (From OE-Core rev: 25b43cb05c645e43f96bc18906441b8fdc272228) Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* icecc.bbclass: replace os.popen with subprocess.check_outputMartin Jansa2016-10-061-4/+10
| | | | | | | | | * otherwise there is a lot of warnings about missing close on file descriptor (From OE-Core rev: 629ff6eb58ddad2d533cbcc8b1a4594d3c8fd441) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* populate_sdk_base.bbclass: Make do_populate_sdk depend on ↵Peter Kjellerstedt2016-10-061-1/+1
| | | | | | | | | PACKAGE_EXCLUDE_COMPLEMENTARY (From OE-Core rev: 06c732bb8e2896d789716e7f0635aac9ff3a2d42) Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* image.bbclass: Make do_rootfs depend on PACKAGE_EXCLUDE_COMPLEMENTARYPeter Kjellerstedt2016-10-061-1/+1
| | | | | | | (From OE-Core rev: 7294c550eb3c7e31f8b80c7055aa84945c75c7f1) Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/sstate.bbclass: Enable thread lock when checkstatusAníbal Limón2016-10-051-0/+4
| | | | | | | | | | | | | | The checkstatus function fires an event to notify bitbake UI about the progress of the task, this function is implemented using ThreadPool and is causing event lose when multiple threads tries to fire an event (writes over socket/fd). [YOCTO #10330] (From OE-Core rev: 6e0bb9d141438c0051c32b0d3a247915b71ccb82) Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-14 14:12:30 +0000