summaryrefslogtreecommitdiffstats
path: root/meta/classes
Commit message (Collapse)AuthorAgeFilesLines
* Switch to Recipe Specific SysrootsRichard Purdie2017-01-2321-208/+493
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is comparatively large and invasive. It does only do one thing, switching the system to build using recipe specific sysroots and where changes could be isolated from it, that has been done. With the current single sysroot approach, its possible for software to find things which aren't in their dependencies. This leads to a determinism problem and is a growing issue in several of the market segments where OE makes sense. The way to solve this problem for OE is to have seperate sysroots for each recipe and these will only contain the dependencies for that recipe. Its worth noting that this is not task specific sysroots and that OE's dependencies do vary enormously by task. This did result in some implementation challenges. There is nothing stopping the implementation of task specific sysroots at some later point based on this work but that as deemed a bridge too far right now. Implementation details: * Rather than installing the sysroot artefacts into a combined sysroots, they are now placed in TMPDIR/sysroot-components/PACKAGE_ARCH/PN. * WORKDIR/recipe-sysroot and WORKDIR/recipe-sysroot-native are built by hardlinking in files from the sysroot-component trees. These new directories are known as RECIPE_SYSROOT and RECIPE_SYSROOT_NATIVE. * This construction is primarily done by a new do_prepare_recipe_sysroot task which runs before do_configure and consists of a call to the extend_recipe_sysroot function. * Other tasks need things in the sysroot before/after this, e.g. do_patch needs quilt-native and do_package_write_deb needs dpkg-native. The code therefore inspects the dependencies for each task and adds extend_recipe_sysroot as a prefunc if it has populate_sysroot dependencies. * We have to do a search/replace 'fixme' operation on the files installed into the sysroot to change hardcoded paths into the correct ones. We create a fixmepath file in the component directory which lists the files which need this operation. * Some files have "postinstall" commands which need to run against them, e.g. gdk-pixbuf each time a new loader is added. These are handled by adding files in bindir with the name prefixed by "postinst-" and are run in each sysroot as its created if they're present. This did mean most sstate postinstalls have to be rewritten but there shouldn't be many of them. * Since a recipe can have multiple tasks and these tasks can run against each other at the same time we have to have a lock when we perform write operations against the sysroot. We also have to maintain manifests of what we install against a task checksum of the dependency. If the checksum changes, we remove its files and then add the new ones. * The autotools logic for filtering the view of m4 files is no longer needed (and was the model for the way extend_recipe_sysroot works). * For autotools, we used to build a combined m4 macros directory which had both the native and target m4 files. We can no longer do this so we use the target sysroot as the default and add the native sysroot as an extra backup include path. If we don't do this, we'd have to build target pkg-config before we could built anything using pkg-config for example (ditto gettext). Such dependencies would be painful so we haven't required that. * PKDDATA_DIR was moved out the sysroot and works as before using sstate to build a hybrid copy for each machine. The paths therefore changed, the behaviour did not. * The ccache class had to be reworked to function with rss. * The TCBOOTSTRAP sysroot for compiler bootstrap is no longer needed but the -initial data does have to be filtered out from the main recipe sysroots. Putting "-initial" in a normal recipe name therefore remains a bad idea. * The logic in insane needed tweaks to deal with the new path layout, as did the debug source file extraction code in package.bbclass. * The logic in sstate.bbclass had to be rewritten since it previously only performed search and replace on extracted sstate and we now need this to happen even if the compiled path was "correct". This in theory could cause a mild performance issue but since the sysroot data was the main data that needed this and we'd have to do it there regardless with rss, I've opted just to change the way the class for everything. The built output used to build the sstate output is now retained and installed rather than deleted. * The search and replace logic used in sstate objects also seemed weak/incorrect and didn't hold up against testing. This has been rewritten too. There are some assumptions made about paths, we save the 'proper' search and replace operations to fixmepath.cmd but then ignore this. What is here works but is a little hardcoded and an area for future improvement. * In order to work with eSDK we need a way to build something that looks like the old style sysroot. "bitbake build-sysroots" will construct such a sysroot based on everything in the components directory that matches the current MACHINE. It will allow transition of external tools and can built target or native variants or both. It also supports a clean task. I'd suggest not relying on this for anything other than transitional purposes though. To see XXX in that sysroot, you'd have to have built that in a previous bitbake invocation. * pseudo is run out of its components directory. This is fine as its statically linked. * The hacks for wayland to see allarch dependencies in the multilib case are no longer needed and can be dropped. * wic needed more extensive changes to work with rss and the fixes are in a separate commit series * Various oe-selftest tweaks were needed since tests did assume the location to binaries and the combined sysroot in several cases. * Most missing dependencies this work found have been sent out as separate patches as they were found but a few tweaks are still included here. * A late addition is that extend_recipe_sysroot became multilib aware and able to populate multilib sysroots. I had hoped not to have to add that complexity but the meta-environment recipe forced my hand. That implementation can probably be neater but this is on the list of things to cleanup later at this point. In summary, the impact people will likely see after this change: * Recipes may fail with missing dependencies, particularly native tools like gettext-native, glib-2.0-native and libxml2.0-native. Some hosts have these installed and will mask these errors * Any recipe/class using SSTATEPOSTINSTFUNCS will need that code rewriting into a postinst * There was a separate patch series dealing with roots postinst native dependency issues. Any postinst which expects native tools at rootfs time will need to mark that dependency with PACKAGE_WRITE_DEPS. There could well be other issues. This has been tested repeatedly against our autobuilders and oe-selftest and issues found have been fixed. We believe at least OE-Core is in good shape but that doesn't mean we've found all the issues. Also, the logging is a bit chatty at the moment. It does help if something goes wrong and goes to the task logfiles, not the console so I've intentionally left this like that for now. We can turn it down easily enough in due course. (From OE-Core rev: 809746f56df4b91af014bf6a3f28997d6698ac78) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package_rpm: Clean up pointless exception handlingRichard Purdie2017-01-221-12/+3
| | | | | | | | | | The exception handling in this function seemed mildly crazy. Python will given perfectly good or in several cases better information if we let its standard traceback/exception handling happen. Remove the pointless code. (From OE-Core rev: 5ecdab6c2589a83bbbc522074052ff4438782102) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package_ipk: Clean up pointless exception handlingRichard Purdie2017-01-221-43/+24
| | | | | | | | | | The exception handling in this function seemed mildly crazy. Python will given perfectly good or in several cases better information if we let its standard traceback/exception handling happen. Remove the pointless code. (From OE-Core rev: 61390438aec4a1f9beb4d332821cc6cda82e0379) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package_ipk: Improve failure debug outputRichard Purdie2017-01-221-4/+1
| | | | | | | | | | | | | | | | | | | | | Currently if the dpkg-deb command fails you see an error message like this: ERROR: nss-3.27.1-r0 do_package_write_ipk: opkg-build execution failed ERROR: nss-3.27.1-r0 do_package_write_ipk: Function failed: do_package_ipk which is pretty much useless. If we use subprocess.check_output, we see a traceback and then: Exception: subprocess.CalledProcessError: Command '<cmd>' returned non-zero exit status 1 Subprocess output: <output> which is much easier to debug from. (From OE-Core rev: 64c8366a805e9cf0168ea2331c50c8d6a70c6dc4) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package_deb: Clean up pointless exception handlingRichard Purdie2017-01-221-47/+26
| | | | | | | | | | | | The exception handling in this function seemed mildly crazy. Python will given perfectly good or in several cases better information if we let its standard traceback/exception handling happen. Remove the pointless code along with the duplicated key checking which was broken in the inner loop by usage of the wrong variable. (From OE-Core rev: f755b07b528e828618141eda402399d791efba4a) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package_deb: Improve failure debug outputRichard Purdie2017-01-221-4/+1
| | | | | | | | | | | | | | | | | | | | | Currently if the dpkg-deb command fails you see an error message like this: ERROR: nss-3.27.1-r0 do_package_write_deb: dpkg-deb execution failed ERROR: nss-3.27.1-r0 do_package_write_deb: Function failed: do_package_deb which is pretty much useless. If we use subprocess.check_output, we see a traceback and then: Exception: subprocess.CalledProcessError: Command '<cmd>' returned non-zero exit status 1 Subprocess output: <output> which is much easier to debug from. (From OE-Core rev: 18160442869f56ee71538bc2dc60d7cb6c08c8a2) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* populate_sdk_ext: Add wic-tools to BB_SETSCENE_ENFORCE_WHITELISTRichard Purdie2017-01-221-1/+1
| | | | | | | | | | wic-tools has tasks which would always rerun and not come from sstate to ensure we have a correctly populated sysroot. This is low overhead and can be ignored from an eSDK perspective. (From OE-Core rev: b631fe91b3939b7981dbf62cb2fb70f7baebe403) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Revert "populate_sdk_ext: whitelist do_package tasks"Richard Purdie2017-01-221-1/+1
| | | | | | | | | Since Paul reverted the sstate.bbclass change which was checking the sstate mirror test results, this change should also not be needed anymore. This reverts commit e30f5002c4f216757ace27ad8d06164716ca46b5. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* utils: Factor out common multilib datastore creation functionRichard Purdie2017-01-221-10/+10
| | | | | | | | | This code is already used in two places and we need it in others so turn it into its own function. (From OE-Core rev: 2a57e1334ff261a7ab45084be0f217e2acfe99af) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel.bbclass: Add PACKAGE_WRITE_DEPS for postinstJussi Kukkonen2017-01-201-1/+2
| | | | | | | | | | The depmodwrapper dependency is not actually used by the class but anyone using pkg_postinst_kernel-base() will need it. (From OE-Core rev: e3f5290d8deba9b7cead73b52ac45a37228fece9) Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fontcache.bbclass: Add PACKAGE_WRITE_DEPS for postinstJussi Kukkonen2017-01-201-1/+1
| | | | | | | | | Qemu is used to run fc-cache on postinstall. (From OE-Core rev: bd20404a78b258bb95df41066f844e08a21e53fa) Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gconf.bbclass: Add PACKAGE_WRITE_DEPS for postinstJussi Kukkonen2017-01-201-1/+2
| | | | | | | | | gconftool-2 is used during postinstall. (From OE-Core rev: d4272e712fe26689f350142426c9893ffe088ddb) Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gio-module-cache: Add PACKAGE_WRITE_DEPS for postinstJussi Kukkonen2017-01-201-1/+1
| | | | | | | | | Qemu is used to run gio-querymodules on postinstall. (From OE-Core rev: d5361cc25fb7dd749e69063be48275c52462f72c) Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gsettings: Add PACKAGE_WRITE_DEPS for postinstJussi Kukkonen2017-01-201-1/+2
| | | | | | | | | glib-compile-schemas is needed during postinstall. (From OE-Core rev: e049427e09b51c09b55d7f1299a7b878fe21768a) Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gtk-immodules-cache: Add PACKAGE_WRITE_DEPS for postinstJussi Kukkonen2017-01-201-1/+1
| | | | | | | | | Qemu is used to run gtk-query-immodules-* on postinstall. (From OE-Core rev: 7103447b198a12a30fdee3f789ff9e0d81534d54) Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* mime.bbclass: Add PACKAGE_WRITE_DEPS for postinstJussi Kukkonen2017-01-201-1/+2
| | | | | | | | | update-mime-database is used in postinstall. (From OE-Core rev: 57d63e8e89980c53f40e12ca670fc3f58f7e4c0f) Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* update-alternatives.bbclass: Add PACKAGE_WRITE_DEPS for postinstJussi Kukkonen2017-01-201-0/+2
| | | | | | | (From OE-Core rev: 00e1e87d0dcf13f3b30682f1fb066f7fa4eed205) Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* update-rc.d: Add PACKAGE_WRITE_DEPS for postinstJussi Kukkonen2017-01-201-1/+3
| | | | | | | | | | use_updatercd() will always return true in rootfs generation so checking that is not required. (From OE-Core rev: 0db5328ee2a80152904b9f82b738f92e9e38da55) Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* useradd: Add PACKAGE_WRITE_DEPS for postinstRichard Purdie2017-01-201-0/+1
| | | | | | | | The postinstall needs shadow-native, mark the dependency (From OE-Core rev: f3140f9c9cb8ff7ea29d0b77a9bfac419a216cf4) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* systemd: Add PACKAGE_WRITE_DEPS for postinstRichard Purdie2017-01-201-0/+1
| | | | | | | | The postinstall needs systemd-systemctl-native, mark the dependency (From OE-Core rev: d2fb76e4aed927e9900de2e87e7e1b792bc88651) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* pixbufcache: Add PACKAGE_WRITE_DEPS for postinstRichard Purdie2017-01-201-0/+2
| | | | | | | | The postinstall needs qemu-native and gdk-pixbuf-native, mark these dependencies (From OE-Core rev: 334a12bb25770dfcd999a7def3612db4b6cd762a) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-module-split: Add PACKAGE_WRITE_DEPS for postinstRichard Purdie2017-01-201-0/+2
| | | | | | | | The postinstall needs kmod-native and depmodwrapper-cross, mark these dependencies. (From OE-Core rev: 0e4f5eb4f8443ed98d7c8aaf0b999c5618b7cf25) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gtk-icon-cache: Add PACKAGE_WRITE_DEPS for postinstRichard Purdie2017-01-201-0/+2
| | | | | | | | | | gdk-pixbuf-native and gtk-icon-utils-native are needed by the postinstall scripts so mark the dependency. The utils may be needed at icon build time too so DEPENDS is unchanged. (From OE-Core rev: d62e9fe21a47f5b38278a9b12b73d617c29d3c4f) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sstate: Drop the depchain isPostDep() checksRichard Purdie2017-01-201-9/+7
| | | | | | | | | | | | | The dependencies of do_package_write_* tasks are either going to be packaging tools needed to build the packages, or, native tools needed at postinst time. Now we've formalised this dependency pattern, drop the hardcoded list and work based on the rule. The package creation tools are usually the same tools needed at rootfs/postinst time anyway so the difference is moot. (From OE-Core rev: 8082c6aabf838a2cc5253d2bb1bd8867f2e1ba6a) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/package*: Add support for PACKAGE_WRITE_DEPSRichard Purdie2017-01-204-0/+11
| | | | | | | | | | | | | Add a new variable to allow markup of postinstall (and preinst) script dependnecies on native/cross tools. If your postinstall can execute at rootfs creation time rather than on target but depends on a native tool in order to execute, you need to list that tool in PACKAGE_WRITE_DEPENDS. (From OE-Core rev: aff8ca95b8303a4a2a5600c0d8ec0a50ad677258) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Revert "kernel: Modify kernel modules installation path."Jason Wessel2017-01-202-7/+7
| | | | | | | | | | | | | This reverts commit 0ccb2efe9837e2915c093341a662dffc1df00866. The OVS fails to function and the kernel modules cannot be found by any of the kernel tools such as depmod because they are installed into the wrong directory in multilib 64bit/32bit bulids. (From OE-Core rev: 85cec1e3df68e932c7b210956ef5f17b85f3616f) Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Revert "classes/sstate: add a mode to error if sstate package unavailable"Paul Eggleton2017-01-201-23/+0
| | | | | | | | | | | | | | | | | | | | | It turns out that this check cannot work. We don't have the information to know whether an sstate package is really needed at this point in the execution, so we check the availability for things that we won't actually end up needing later on. Thus we can't fail if some of these aren't found or we'll get needless failures. This check was intended to give earlier more accurate errors when sstate artifacts failed to download, but that's not practical so we'll rely solely on the task execution check that was added within the runqueue. This reverts most of commit 9e711b54487c3141d7264b8cf0d74f9465020190 (we still need to allow BB_SETSCENE_ENFORCE through from the external environment since the eSDK relies upon that.) (From OE-Core rev: ff29ac6901d04487312f554d9e62250a18729c6c) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/populate_sdk_ext: force a known value for TMPDIRPaul Eggleton2017-01-201-2/+3
| | | | | | | | | | | | | | | | If TMPDIR is configured to be somewhere outside of TOPDIR (a not uncommon configuration where you have multiple disks and space on /home is at a premium) then our attempt to find out the location of paths under TMPDIR by using a relative path led to horribly broken paths ending up in the eSDK. To save pain, just force a known value for TMPDIR (i.e. ${TOPDIR}/tmp) and then we can assume that everywhere else. Fixes [YOCTO #10797]. (From OE-Core rev: 4fe60d526a94f30b201c434994e80fef0f7392f0) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* staging: Add dependency on virtual/binutils for strip binaryRichard Purdie2017-01-203-0/+9
| | | | | | | | | | The staging code strips binaries and we need virtual/binutils for that. Add a specific dependency since the one from do_configure and others may not be enough to ensure the binaries are in our own sysroot. (From OE-Core rev: 9a799f70574ee8e0b1267497edfb4ac63166ef8f) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* multilib_global: Drop pointless event mask/code filteringRichard Purdie2017-01-201-6/+4
| | | | | | | | | This code was pointless so cleanup, drop the unused event and the filtering is no longer needed. (From OE-Core rev: 4fd9e74035703b45a9e6e9143b1ec421e172200c) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sstate: Fix EXTRA_STAGING_FIXMES handlingRichard Purdie2017-01-201-0/+1
| | | | | | | | | | The code wasn't working properly, tweak so that it works as expected and the grep expression includes the right patterns. Not sure this code has ever worked prior to this. (From OE-Core rev: 6a46a974611c5262efefc21a11adb736c0fb206a) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rm_work.bbclass: clean up soonerPatrick Ohly2017-01-201-11/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Having do_rm_work depend on do_build had one major disadvantage: do_build depends on the do_build of other recipes, to ensure that runtime dependencies also get built. The effect is that when work on a recipe is complete and it could get cleaned up, do_rm_work still doesn't run because it waits for those other recipes, thus leading to more temporary disk space usage than really needed. The right solution is to inject do_rm_work before do_build and after all tasks of the recipe. Achieving that depends on the new bitbake bb.event.RecipeTaskPreProcess and bb.build.preceedtask(). It can't just run in an anonymous function, because other anonymous functions that run later may add more tasks. There's still such a potential conflict when some future RecipeTaskPreProcess event handler also wants to change task dependencies, but that's not a problem now. Should it ever occur, the two handlers will have to know about each other and cooperate to resolve the conflict. Benchmarking (see "rm_work + pybootchart enhancements" on the OE-core mailing list) showed that builds with the modified rm_work.bbclass were both faster (albeit not by much) and required considerably less disk space (14230MiB instead of 18740MiB for core-image-sato). Interestingly enough, builds with rm_work.bbclass were also faster than those without. (From OE-Core rev: 936179754c8d0f98e1196ddc6796fdfd72c0c3b4) Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rm_work_and_downloads.bbclass: more aggressively minimize disk usagePatrick Ohly2017-01-201-0/+33
| | | | | | | | | | | | | | | | | | | | rm_work.bbclass never deletes downloaded files, even if they are not going to be needed again during the build. rm_work_and_downloads.bbclass is more aggressive in minimizing the used disk space during a build, but has other disadvantages: - sources required by different recipes need to be fetched once per recipe, not once per build - incremental builds do not work reliably because sources get removed without ensuring that sources gets fetched again That makes rm_work_and_downloads.bbclass useful for one-time builds in a constrained environment (like a CI system), but not for general use. (From OE-Core rev: ca23a07fc6677720508197f2b44573bfd6b52f28) Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rm_work.bbclass: allow preserving additional contentPatrick Ohly2017-01-201-1/+9
| | | | | | | | | | | | | | | | | | | | By default, do_rm_work either skips recipes entirely (when listed in RM_WORK_EXCLUDE) or removes everything except for temp. In meta-swupd, virtual image recipes collaborate on producing update data for the base recipe. Tasks running in the base recipe need some information from the virtual images. Those files could be passed via a new shared work directory, but that scatters data in even more places. It's simpler to use the normal WORKDIR and teach rm_work.bbclass to not remove the special output with the new RM_WORK_EXCLUDE_ITEMS. (From OE-Core rev: 28fbb2dd17033308cc09811fbc4f43e2f6c17f54) Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* oeqa/utils/qemurunner.py: Be sure to stop qemu-systemMariano Lopez2017-01-191-0/+2
| | | | | | | | | | | | | | | When runqemu fails, qemu-system process would keep running and won't be killed, setpgrp() was used when runqemu was a shell script but it seems it doesn't work always with python. This would kill qemu-system explicity and to avoid leaving it behind. (From OE-Core rev: 9d2b1aa1bcfb2f1933a8eeb9470b4174d5da2f0d) Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* extrausers: Use static ids when availableDavid Vincent2017-01-192-6/+35
| | | | | | | | | | | | | When creating users at the image level using extrausers class, the current behavior is to ignore the status of USERADDEXTENSION. This could lead to undefined behavior when static ids are expected but the system falls back to dynamic ones. (From OE-Core rev: 331140e892f84b70bced44a0b5d14f32ec95042e) Signed-off-by: David Vincent <freesilicon@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-module-split: Append KERNEL_VERSION string to kernel module nameOla Redell2017-01-191-1/+8
| | | | | | | | | | | | | | | | | | | | The KERNEL_VERSION string is added to kernel module package names in order to make the kernel modules for different kernel versions distinct packages instead of different versions of the same package. With this change, when a new kernel is installed together with its kernel modules (e.g. by upgrade of the packages kernel and kernel-modules) using some package manager such as apt-get or rpm, the kernel modules for the older kernel will not be removed. This enables a fall back to the older kernel if the new one fails. Also, for backwards compatibility and to enable kernel version agnostic dependencies to kernel modules, create a virtual package with the old (shorter) kernel module package name using RPROVIDES. (From OE-Core rev: 78cde87bb6e71ec5b603426879267874900d09f3) Signed-off-by: Ola Redell <ola.redell@retotech.se> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* waf.bbclass: handle PACKAGECONFIGAndreas Müller2017-01-191-0/+2
| | | | | | | | (From OE-Core rev: 8d72bea03b3db1ddece309d1bab80f9e4c4c2d33) Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-fitimage.bbclass: Check value of UBOOT_SIGN_ENABLENathan Rossi2017-01-191-1/+1
| | | | | | | | | | | Check the value of UBOOT_SIGN_ENABLE, as it is defaulted to "0" which for matches as True in python due to being a non-empty string. (From OE-Core rev: 35ebe793f2d933366863d17fb807b3d39f594334) Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-fitimage.bbclass: Don't assume KERNEL_IMAGETYPE == fitImageNathan Rossi2017-01-191-4/+4
| | | | | | | | | | | | | | The name of the output image for a fitImage that contains a ramdisk should match the same as for the fitImage that does not contain a ramdisk. As such it should not be assumed that KERNEL_IMAGETYPE is "fitImage". This change explicitly sets the name of the output ramdisk/initramfs to start with fitImage as does the non-ramdisk output. (From OE-Core rev: 81caed2b7071ffc9ed8077d7d76952f2a2a4713d) Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-fitimage.bbclass: Allow unset load/entry addresses for ramdisksNathan Rossi2017-01-191-2/+11
| | | | | | | | | | | | Allow the load and entry addresses to remain unset if the UBOOT_RD_* variables are also unset for ramdisk entries in the image tree. This allows for U-Boot to decide dynamically where to load the ramdisk. (From OE-Core rev: 941b6ce3b297ed83f1c05dd76bfeefbf93482e6f) Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* qemuboot.bbclass: use IMGDEPLOYDIRRobert Yang2017-01-191-2/+3
| | | | | | | | | | So that "bitbake <image> -ccleansstate" can remove qemuboot.conf (From OE-Core rev: 0704f15d1ad7483f80ffa18fa32b6115923641cf) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: Improved error messageJuro Bystricky2017-01-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | When a non-existing MACHINE is specified, sanity check issues the following message: Please set a valid MACHINE in your local.conf or environment However, MACHINE can also be set in multiconfig .conf file(s). Hence we may have several different MACHINE settings within one (multiconfig) build, so the present error message is fairly ambiguous. This patch remedies this by explicitly naming the offending MACHINE and by amending the list of places where this erroneous MACHINE definition could have originated. MACHINE=xyz is invalid. Please set a valid MACHINE in your local.conf, environment or other configuration file. [YOCTO#10810] (From OE-Core rev: a7cb408dd784178197687a2129e936620bf6a0d3) Signed-off-by: Juro Bystricky <juro.bystricky@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* systemd-boot.bbclass: Fix SYSYTEMD_BOOT_CFG creationAlejandro Hernandez2017-01-161-0/+3
| | | | | | | | | | | | | This patch makes sure the directory which will contain the systemd configuration (loader.conf) is created before the configuration file is written, fixing errors when it tried to write it to a non-existent directory (From OE-Core rev: f4ba23212c97fb8c3351a3cf981ee355ae2fc9b1) Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* insane.bbclass: print license text as part of QA messagePatrick Ohly2017-01-161-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It it is hard to select exactly the right lines from a file, in particular because the documentation did not specify the exact semantic (YOCTO #10898). When the QA license check fails, it now includes the license text for which the md5sum was calculated. When adding a new entry to LIC_FILES_CHKSUM, developers can then verify that they picked the desired lines. When the checksum of an older entry changes, the developer does not have to manually look up the changed text. Here's an example which probably has an endline which is too large (message triggered by changing the md5sum in the recipe): ERROR: cmake-native-3.7.1-r0 do_populate_lic: QA Issue: cmake-native: The LIC_FILES_CHKSUM does not match for file://Source/cmake.h;beginline=1;endline=3;md5=deadbeef cmake-native: The new md5 checksum is 4494dee184212fc89c469c3acd555a14 cmake-native: Here is the selected license text: vvvvvvvvvvvvvvvvvvvvvvvvvvvv beginline=1 vvvvvvvvvvvvvvvvvvvvvvvvvvvvv /* Distributed under the OSI-approved BSD 3-Clause License. See accompanying file Copyright.txt or https://cmake.org/licensing for details. */ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ endline=3 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ cmake-native: Check if the license information has changed in .../cmake.h (lines 1 through to 3) to verify that the LICENSE value "BSD" remains valid [license-checksum] The beginline/endline values are only repeated in the borders if set. License snippets larger larger than 20 lines (configurable with QA_MAX_LICENSE_LINES) are truncated in the middle. (From OE-Core rev: b5b869348adc8e932eb58ecdfdff93d1d63e775c) Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc.bbclass: Add task buildcleanOla x Nilsson2017-01-161-1/+18
| | | | | | | | | | | | | | | | | | The buildclean task should call the package build system clean command, just implemented for Make for now. This is meant for recipes where S == B, but can be useful as a standalone task for other recipes too. When S == B, set it to run before do_clean which will do what most developers expect when calling bitbake -c clean. For S != B, do not add it before clean as it is not needed and may take some time. (From OE-Core rev: cfaad320d9565003e97893efcb14d00d0b8e23bb) Signed-off-by: Ola x Nilsson <olani@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel: Modify kernel modules installation path.Amarnath Valluri2017-01-162-7/+7
| | | | | | | | | | Use ${base_libdir}/modules inplace of /lib/modules for kernel modules installation path. (From OE-Core rev: 0ccb2efe9837e2915c093341a662dffc1df00866) Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rootfs-postcommands.bbclass: sort passwd entriesPatrick Ohly2017-01-161-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The /etc passwd files in a rootfs consist of the default entries from base-passwd plus anything that gets added via package installation, EXTRA_USERS_PARAMS and/or system sysusers. The execution order of preinst scripts is not perfectly deterministic, or at least unrelated changes caused it to change in a non-deterministic way, resulting in irrelevant changes in the order of passwd entries. useradd-staticids.bbclass ensures that the numeric IDs don't change, but re-ordering can still occur, which is bad for reproducible builds and file-based update mechanisms like swupd which work best if changes are as minimal as possible. To achieve that, the files get sorted in a post-processing command, enabled by default. Sorting is based primarily on the numeric IDs, so for example, the "root" user continues to be listed first. "nobody" now is at the end, which wasn't the case before. The order of the entries should not matter, but in obscure cases where it does (like having multiple entries for the same numeric ID) this behavior can be disabled by setting SORT_PASSWD_POSTPROCESS_COMMAND to an empty string. Fixes: YOCTO #10520 (From OE-Core rev: ba684f436908ac2300a00c174d5aa06b4f824367) Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* image_types.bbclass: IMAGE_TYPEDEP_ now adds deps for conversion typesRandy Witt2017-01-161-3/+11
| | | | | | | | | | | | | | Previously if IMAGE_TYPEDEP_* contained a conversion type of the form, "foo.bar", the dependency on CONVERSION_DEPENDS_bar would not get added to the task depends for do_rootfs. [YOCTO #10883] (From OE-Core rev: 037d39898e0e16c6d5b24a8d3844abfb328d3c14) Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* image_types.bbclass: look for wks files in <layer>/wicEd Bartosh2017-01-161-1/+1
| | | | | | | | | | | | Added <layer>/wic directory to the list of paths to look for wks files. This makes wic behaviour consistent when invoked manually and by bitbake. (From OE-Core rev: d345985db69dc86e9a8f8e2506b250d8780374cb) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-18 03:50:09 +0000