summaryrefslogtreecommitdiffstats
path: root/meta/classes/sanity.bbclass
Commit message (Collapse)AuthorAgeFilesLines
* sanity: Don't make assumptions about cwdRichard Purdie2013-09-011-2/+3
| | | | | | | | | | | When using the recently fixed out of build directory bitbake invocations, I was puzzled why bitbake seemed to be pausing. The reason was due to running the sanity tests each and every time. This was due to current working directory assumptions within the sanity test code. Fix this to use TOPDIR. (From OE-Core rev: 1cdc1b37b840bda961258cf2bfb2f75331bdb310) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/sanity: fix some grammatical errors in messagesPaul Eggleton2013-08-031-3/+3
| | | | | | | | (From OE-Core rev: e2cccd73e480318461641d8bc26d538178ff628a) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/sanity: check for suid root command evilityPaul Eggleton2013-08-031-0/+10
| | | | | | | | | | | | | | | | | Some users have been found to have an unnamed third-party piece of software installed which sets chmod, chown and mknod as suid root as part of its installation process. This interferes with the operation of pseudo and can result in files really being owned by root within the build output, and therefore breaks the build, apart from being a security issue. Check for this and bail out if it is found. Reported-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> (From OE-Core rev: 08d61529f3c7a48ec82e1f8c9c28c7b2e5238934) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: mention version when erroring on LCONF_VERSION mismatchRoss Burton2013-07-291-1/+1
| | | | | | | | | | | | | | | | | | If someone is using a Poky release but not the Poky distribution they'll get a bblayers.conf generated from meta-yocto's template with a LCONF_VERSION that doesn't necessarily match LAYER_CONF_VERSION (default in sanity.conf), as Poky overrides LAYER_CONF_VERSION to cater for the meta-yocto split. The resulting error message will tell them to compare bblayers.conf with bblayers.conf.sample, but they're identical. By explicitly refering to the required and actual versions this situation is hopefully clearer. (From OE-Core rev: da58843fd07dec43700a4c54ac469d1fda71aa50) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: Update gcc sanity checkMark Hatle2013-07-181-13/+29
| | | | | | | | | | | | | | | | | | | The gcc sanity check should be checking for the atomic function directly instead of using the gcc macro. Older versions of gcc do not have the macro defined, but do support the atomic operations. (glib-2.0 checks for both the macro and the function, as long as one is available it will successfully compile.) Update the check to try both -mcpu=native and -mcpu=BUILD_ARCH. Tell the user which version worked properly. [YOCTO #4845] (From OE-Core rev: c126729b29822d3602c9c4fd9016cc79b6057fc5) Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: Check for the known broken version of makeMark Hatle2013-06-281-0/+37
| | | | | | | | | | | | | | | See GNU Savannah bug 30612 -- make 3.82 is known to be broken. A number of vendors are providing a modified version, so checking for just the version string is not enough. We also need to check if the patch for the issue has been applied. We use a modified version of the reproduced to check for the issue. (From OE-Core rev: dede532a980b0fabf0beae4519b89ec74a1c2474) Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: Fix COREBASE sanity testsRichard Purdie2013-06-271-1/+1
| | | | | | | | | We need to expand the COREBASE variable, no idea how these tests were previously working at all... (From OE-Core rev: 099063f353a7a18720c92d87400726a49eed432f) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: Add check for @ character in build directory nameRichard Purdie2013-06-271-4/+6
| | | | | | | | | | | | | | The @ character is not escaped properly in too many places within the system to easily support it so add the character to the list of blacklisted characters. Also tweak the other messages and ensure that all appropriate error messages are disabled in one go. [YOCTO #4772] (From OE-Core rev: 008cb3c501c8313a0a1a0ebce2b0aa61239b548d) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: Various improvementsRichard Purdie2013-06-241-254/+257
| | | | | | | | | | | | | | | | | | | | I started trying to make some changes in sanity.bbclass and couldn't stand the current code. This patch splits out the one big function into a number of smaller units and adds a status class which handles queuing of messages and issues like network errors and whether a reparse is required. It also cleans up some syntax and obsolete code. The other fundamental change is the tests are split into ones which run once and those which run at every build. This was always the way the class was intended to work but that got lost somewhere along the way. This patch fixes that. Its still far from perfect but it is hopefully an improvement and sets the scene for other improvements to be built on top of this. (From OE-Core rev: 4e6de6d5f0454024eec2ec775a938c5dab70610c) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: Drop horrible obsolete minversion hackRichard Purdie2013-06-241-7/+2
| | | | | | | | | We once needed to do this, things seem to work fine without this now, thankfully. (From OE-Core rev: ac090ace11d654dafd642fd93c94091a164476fa) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/conf: Add eventmasks for event handlersRichard Purdie2013-06-141-0/+1
| | | | | | | | | | | Now that bitbake supports masking events for event handlers, lets use this so event handlers are only called for events they care about. This lets us simplify the code indentation a bit at least as well as mildly improving the event handling performance. (From OE-Core rev: bff73743280f9eafebe4591f7368ead91a4eb74d) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* scripts/buildenv-internal/sanity: Update to python 2.7.3 as a minimumRichard Purdie2013-06-141-4/+3
| | | | | | | | | | | | We're finding bugs in python 2.6 and starting to require unittest functionality in python 2.7.x. Its time to bump the minimum version requirement. Anyone without python 2.7.x can use the buildtools-tarball out to install a standalone python/git/tar setup which will work with the system. (From OE-Core rev: 8b90f1becd40a7f857d2fbe30eaffe218a976419) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity: Drop pseudo test, now unneededRichard Purdie2013-06-141-27/+0
| | | | | | (From OE-Core rev: 075278db6f7a4783c952c72eebddf51a12f76075) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* scripts/bitbake sanity.bbclass: Migrate tests for git and tar versionsRichard Purdie2013-06-141-0/+31
| | | | | | | | | | | Migrate tests for correct git and tar versions from the wrapper script to the sanity class. This sets the scene to allow us to remove the bitbake wrapper script. (From OE-Core rev: 7b370e23594da5dcb53cd5507ec289c3ef2d9fb5) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: non-zero status means that we need -march.Randy MacLeod2013-06-111-1/+1
| | | | | | | | | | A non-zero status from the march test for gcc means that the "march" flag is needed. Correct the logic to return True in this case. (From OE-Core rev: 217fd857df78c66eae853f935e9cdafcbeb3bc31) Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: make sure python is a full installJesse Zhang2013-06-041-0/+6
| | | | | | | | | | | | | Components of the Standard Library should be available. Add a sanity check for xml.parsers.expat; we might add more in the future. [YOCTO #4424] (From OE-Core rev: bb027a332f2f2927a6bcbc4c035b42a012d0579e) Signed-off-by: Jesse Zhang <sen.zhang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: Drop dubious printRichard Purdie2013-05-241-1/+0
| | | | | | (From OE-Core rev: be4cd4614a2a702130d18e9d082fd83a15faa013) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: Attach the missing value to a format string.Peter Seebach2013-05-131-1/+1
| | | | | | | | | | The tuning changes to sanity.bbclass were almost right, but one of the messages had a %s with no % operator. (From OE-Core rev: cf5e40598ae9a83f22cabedc7b72000beb62703c) Signed-off-by: Peter Seebach <peter.seebach@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* class/lib: Fix up various file access methodsRichard Purdie2013-05-091-33/+30
| | | | | | | | | | | | | | There are various bits of cruft that have built up around our file accesses. This patch cleans some of them up, specifically: * Remove pointless "from __builtin__ import file" * Use open(), not file() * Wrap file usage in a with container to ensure files are closed * Add missing .close() calls in some cases (From OE-Core rev: a43e0a8ecd0441131e929daf998c3cd454d9c8f3) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/lib: Fix getcmdstatus breakageRichard Purdie2013-05-091-3/+2
| | | | | | | | | I mistakenly thought subprocess had getcmdstatus in python 2. It doesn't so lets add a wrapper and have this work in both worlds. (From OE-Core rev: 2253e9f12734c6e6aa489942b5e4628eca1fa29d) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity/patch.py: Remove commands module usageRichard Purdie2013-05-091-4/+3
| | | | | | | | | The commands module is removed in python3. Use the subprocess module instead and the pipes module to replace the mkargs usage. (From OE-Core rev: e2e1dcd74bc45381baccf507c0309dd792229afe) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/lib: Update to use print as a function callRichard Purdie2013-05-091-2/+4
| | | | | | | | | In python 3 print is a function call. In some cases bb.note is a more appropriate call to make. (From OE-Core rev: 754874e68d1037c76fc4cc7d35d3fa12946d00f8) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: Use open(), not file()Richard Purdie2013-05-091-12/+12
| | | | | | | | file() syntax is removed in python 3, use open() instead. (From OE-Core rev: b2d10f15db23246e3957b69d77433f87674928bb) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* clases/lib: Use modern exception syntaxRichard Purdie2013-05-091-2/+4
| | | | | | | | | Update older code to use modern exception handling syntax which is the form accepted by python 3. (From OE-Core rev: b010501cd089e649a68f683be0cf4d0aac90fbe3) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/sanity: fix handling of bblayers.conf updatingPaul Eggleton2013-04-131-25/+52
| | | | | | | | | | | | | | | | | | | | | | Fix the fairly long-standing problem of treating a newer bblayers.conf in the same manner as an older one (reporting that it had been updated even if nothing was done). The recent work to do a reparse without having to manually re-run bitbake turned this from an annoyance into an endless loop, so it had to be fixed. As part of fixing this the following changes have been made: * Extensions are now implemented using a function list, so distro layers can add their own functions which should either succeed (indicating they have successfully updated the file) or raise an exception (indicating nothing could be done). The functions are called in succession until one succeeds, at which point we reparse. * If we can't do the update, the error message now says "older/newer" instead of just "older" since we only know the version is different. (From OE-Core rev: 46b00fdfc9d1e3dc180de087bae2682a1baa2954) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fix march sanity check issueZhenhua Luo2013-03-221-3/+6
| | | | | | | | | | | | | | | | | | | | | 1. check if gcc_test is really generate before os.remove("gcc_test") to avoid following error: ERROR: Execution of event handler 'check_sanity_eventhandler' failed Traceback (most recent call last): File "check_sanity_eventhandler(e)", line 4, in check_sanity_eventhandler(e=<bb.event.ConfigParsed object at 0x3151450>) File "sanity.bbclass", line 107, in check_sanity(sanity_data=<bb.data_smart.DataSmart object at 0x11ba110>) File "sanity.bbclass", line 22, in check_gcc_march(sanity_data=<bb.data_smart.DataSmart object at 0x11ba110>) OSError: [Errno 2] No such file or directory: 'gcc_test' 2. set result to False when build failed with -march=native to ensure -march=native is appended to BUILD_CFLAGS when host gcc really supports this flag, otherwise following error appears when build native packages. | cap_text.c:1: error: bad value (native) for -march= switch | cap_text.c:1: error: bad value (native) for -mtune= switch (From OE-Core rev: 4a4228fe250c8b23a5deeb25825d61c6e84a47a2) Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass:check if necessary to add march to BUILD_CFLAGSHongxu Jia2013-03-071-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1, There are a set of GCC built-in functions for atomic memory access. The definition given in the Intel documentation allows only for the use of the types int, long, long long as well as their unsigned counterparts. GCC will allow any integral scalar or pointer type that is 1, 2, 4, 8 or 16 bytes in length, suffix `_n' where n is the size of the data type.Such as: __sync_fetch_and_add_n __sync_fetch_and_sub_n __sync_fetch_and_or_n __sync_fetch_and_and_n __sync_fetch_and_xor_n __sync_fetch_and_nand_n The above builtins are intended to be compatible with those described in the Intel Itanium Processor-specific Application Binary Interface, section 7.4. 2, The glib-2.0-native and qemu-native invoke the above builtin function with suffix `_4', and glib-2.0-native uses __GCC_HAVE_SYNC_COMPARE_AND_SWAP_4 to test the existance. 3, Not all above builtin functions are supported by all target processors.Such as i386 does not support the functions with suffix `_4', but i486 or later support. 4, Prior to GCC 4.5, on the Intel's processor, the default arch is i386 unless GCC is built with the --with-arch switch. Since GCC 4.5 the default arch is implied by the target. 5, If your host GCC is older than 4.5 and it is built without the --with-arch switch, when you use the GCC to compile target, you should specify -march to tell GCC what the target's arch is, otherwise i386 is used as default. Above all, when use older GCC to compile glib-2.0-native or glib-2.0-native, and the GCC incorrectly uses i386 as default, the above builtin function with suffix `_4' is not referenced. We should have a check in sanity.bbclass to tell the user if necessary to add march to BUILD_CFLAGS in this situation. http://gcc.gnu.org/onlinedocs/gcc-4.7.2/gcc/_005f_005fsync-Builtins.html#_005f_005fsync-Builtins http://gcc.gnu.org/ml/gcc-help/2009-06/msg00037.html http://gcc.gnu.org/gcc-4.5/changes.html http://gcc.gnu.org/bugzilla/show_bug.cgi?id=47460 http://llvm.org/bugs/show_bug.cgi?id=11174 http://download.intel.com/design/itanium/downloads/245370.pdf [YOCTO #3563] (From OE-Core rev: 38042ed8586b3abe427af33debc2402caeca52cb) Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: always use oe.lsb.distro_identifier methodMartin Jansa2013-03-021-32/+4
| | | | | | | | | | | * even when /etc/redhat-release or /etc/SuSE-release exists * don't read /etc/lsb-release manually, NATIVELSBSTRING is not reading it too (From OE-Core rev: 3dba05d74821f08cd96a18351805c8812ddd626c) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity: use lsb distro_identifierMartin Jansa2013-03-011-4/+1
| | | | | | | | | | | | | | | | | | | | | * distro_identifier returns lsb_data['Distributor ID']-lsb_data['Release'] which in some cases is different then lsb_release -d -s, e.g. Distributor ID: Ubuntu Description: Ubuntu 12.04 LTS Release: 12.04 Codename: precise But we probably don't need to sanity list each point release in LTS and sstate is already using distro_identifier as prefix for native sstate archives * This will need update to SANITY_TESTED_DISTROS (at least s/Ubuntu 12.04 LTS/Ubuntu-12.04/g etc), that's why sending as RFC first. (From OE-Core rev: a32ea459ca168792161af2d521a14fe00cffb4b3) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity: check_path_length: replace tab with 8 spacesMartin Jansa2013-02-191-1/+1
| | | | | | | | (From OE-Core rev: de3f2367c46a213d07d834c7e874d2a4a0697026) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: when bblayers.conf is updated, it invokes a reparseCristiana Voicu2013-02-151-9/+9
| | | | | | | | | | | | | When bblayers.conf is updated(when sanity check is running), it should tell to bitbake to reparse configuration files. I will send a patch to bitbake-devel, with the actions needed in bitbake and hob. [YOCTO #3213] (From OE-Core rev: 5db1ff93f7204b43b7242fc7ef415216eb632ed8) Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: Check for DISPLAY for qemutests in BB_ORIGENV nowRichard Purdie2013-02-071-2/+4
| | | | | | (From OE-Core rev: e43f8f917e4069d74b467dfd6aa29ff762e83a5e) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: Ensure tmpdir exists when running the checkRichard Purdie2013-01-241-0/+1
| | | | | | | | | | | This avoids tracebacks from bitbake if the directory doesn't already exist. [YOCTO #3640] (From OE-Core rev: 1a60e96b21d328fe936e594f3061459e8f2f1b5e) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* multilib: fix allarch/kernel/module-base multilib issuesConstantin Musca2012-12-311-0/+4
| | | | | | | | | | | | | | | | | | | | | | | - skip the non-packagegroup allarch recipes in multilib_virtclass_handler - extend PROVIDES/RPROVIDES for allarch recipes which are not packagegroups - use variants from MULTILIB_GLOBAL_VARIANTS (lib32 lib64 libx32) to create additional pkgdata files for multilib allarch: ${pkgdatadir}/${variant}-${PN} and ${pkgdatadir}/runtime/${variant}-${pkg} - use variants from MULTILIB_VARIANTS to create additional pkgdata files for multilib kernel/module-base recipes - add a sanity check to determine if the current multilib is in MULTILIB_GLOBAL_VARIANTS [YOCTO #2918] [YOCTO #3440] [YOCTO #3565] [YOCTO #3568] (From OE-Core rev: bc4da2573dfb59ea2fc4af359701818df20f7663) Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake.conf/sanity: Separate versions and PN stamp components into separate ↵Richard Purdie2012-11-201-0/+2
| | | | | | | | | | | | | | | directories for WORKDIR and STAMP This means some of the hacks we have to tell where the package name ends and the version starts in the directory layout becomes obsolete, simplifying the work of some of the cleanup scripts. It also makes the layout slightly more intuitive to the user. It does force a rebuild onto the user but it will reuse sstate successfully. (From OE-Core rev: 05075cf3138d1c61f5cf4fe0e1a4587acc00c692) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: trigger network tests explicitlyBogdan Marinescu2012-10-181-0/+3
| | | | | | | | | | | | The network tests in sanity.bbclass can now be trigerred explicitly by firing the NetworkTest event. This is part of the fix for bug #3026. [YOCTO #3026] (From OE-Core rev: f1f43d55dbb020a0145c58731d4259fd906d9d1e) Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: Fix invalid test for network errorBogdan Marinescu2012-10-021-1/+1
| | | | | | | | | The test for network error in sanity.bbclass was negated. (From OE-Core rev: 9fcd0866f0e30a50182434f6bcae13bf9575807f) Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity: Added explicit network error status in SanityCheckFailed eventBogdan Marinescu2012-09-281-7/+13
| | | | | | | | | | | | | | If we fail a network test, a special flag is set in the SanityChekFailed event. This helps Hob identify the network error properly and display a special message to the user. [YOCTO #3025] (From OE-Core rev: 7877c4344db89237bba5f9a03342bfd9a03aebbf) Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: bblayers.conf should be updated automaticallyConstantin Musca2012-09-281-1/+60
| | | | | | | | | | | | | | | | - add check_bblayers_conf bitbake function which does the bblayers.conf v4 -> v5 update if necessary (every layer should make its specific bblayers.conf upgrades appending to the check_bblayers_conf function) - we ask the user to re-run bitbake because we can't trigger reparsing without being invasive [YOCTO #3082] (From OE-Core rev: 03ad4edace5db9c6e15ca776d06d20b7d4e42afc) Signed-off-by: Constantin Musca <constantinx.musca@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/sanity: remove obsolete codePaul Eggleton2012-09-121-7/+2
| | | | | | | | | | | | We can now rely upon the minimum BitBake version having the SanityCheckFailed event, so remove the code to handle if this is not there. (From OE-Core rev: ba17572c9c11efb45a92ba97914ce1f6d84002c8) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/sanity: skip tune checks if machine is invalidPaul Eggleton2012-09-121-3/+7
| | | | | | | | | | | If there is no valid machine configuration it's almost guaranteed that the tune checks will fail, so just suppress them in that case. (From OE-Core rev: 629c585e687cda9290efcffd18dd92fdf16009ab) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: Move back to running at ConfigParsed timeRichard Purdie2012-09-051-5/+5
| | | | | | | | | | | | If we don't do this, users can get extremely confused errors since the sanity tests happen too late (after parsing) and don't see the warnings. Also cleanup messages about merging configuration file changes to give better hints at where the updated files may be. (From OE-Core rev: 7b8a68cda7ef8186e834b39e73ee12a55b33f85b) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta/classes: Various python whitespace fixesRichard Purdie2012-08-211-2/+2
| | | | | | | | | | | It was pointed out we have a number of weird indentations in the python functions. This patch cleans up 3, 7 and other weird indentations for the core bbclass files. It also fixes some wierd (odd) shell function indentation which my searches picked up. (From OE-Core rev: 8385d6d74624000d68814f4e3266d47bc8885942) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/sanity: remove texi2html from required host utilitiesPaul Eggleton2012-08-201-1/+1
| | | | | | | | | | | | | | | texi2html is not actually required to build world of OE-Core anymore, so we don't need to mandate it. The only difference without it (verified with buildhistory) is that groff doesn't produce HTML documentation; the rest of its docs are still produced and packaged and no other packages are affected. Part of the work towards [YOCTO #2423]. (From OE-Core rev: aa1c4519f8e549b43a7d8bc51c5342d3409b464b) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity: display the parsed BBPATH when complaining about CWD elementsRoss Burton2012-07-201-0/+1
| | | | | | | | | | Many people don't understand the nuances of PATH/BBPATH, so help them by clarifying the warning and displaying the parsed list element-by-element. (From OE-Core rev: 6f7be2498134402b5e0f766df5c57e1f496d0d06) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove a number of unneeded import os/bb callsRichard Purdie2012-07-191-5/+2
| | | | | | | | | | The bb and os modules are always imported so having these extra import calls are a waste of space/execution time. They also set a bad example for people copy and pasting code so clean them up. (From OE-Core rev: 7d674820958be3a7051ea619effe1a6061d9cbe2) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity: display the parsed PATH when complaining about CWD elementsRoss Burton2012-07-181-1/+2
| | | | | | | | | | Many people don't understand the nuances of PATH, so help them by clarifying the warning and displaying the parsed PATH element-by-element. (From OE-Core rev: 47e6ab41f0f84e6bed7d337ebf96c954ec6909e8) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake.conf: Add git-native to ASSUME_PROVIDEDRichard Purdie2012-07-181-1/+1
| | | | | | | | | | | | | | | Originally, git was something new, not installed everywhere and had commandline stability problems. This has changed and git it no longer makes sense to continually build this when the system installed version is likely sufficient. This speeds up build since recipes no longer have to wait for git-native to build if they're fetched from a git:// SRC_URI. Also add git to the sanity checks and drop the no unneeded svn reference. (From OE-Core rev: 79e24186481770181565a18d177584d0d72399fe) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: the tmpdir can't be longer than 410Robert Yang2012-07-091-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There will be errors when the length of the tmpdir is longer than 410: 1) Longer than 420: Can't exec "/bin/sh": Argument list too long at /usr/lib/perl/5.10/IO/File.pm line 66. This error happens on both Ubuntu 10.04 and 10.10 when the pkg needs run "autoreconf", this is because it passes many files with absolute path to aclocal, aclocal passes them to perl, this is a limitation of the perl on Ubuntu 10.04 and 10.10, and the perl-native is not ready at this very early stage. 2) Longer than 490: bitbake/lib/bb/persist_data.py", line 197, in connect(database=...) > return sqlite3.connect(database, timeout=5, isolation_level=None) OperationalError: unable to open database file This error happens on Ubuntu 10.04, 10.10 and Fedora 17. This is because the length of the database in sqlite3 module (host's) can't be longer than 490 (or little smaller). The python-native is not ready at this very early stage. The 2 errors are host related, I think that limit the length of the TMPDIR to 410 is OK for most of the build, rarely build sets TMPDIR's longer than 410. [YOCTO #2434] (From OE-Core rev: ebcf949853ff667478a1ea1d3f1f8f41d643e708) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: warn the user if BBPATH contains wrong entriesLaurentiu Palcu2012-06-131-0/+11
| | | | | | | | | | | | If BBPATH references the working directory, the user is warned and asked to fix the problem. [Yocto #1465] (From OE-Core rev: 73f10ae955ba217078fa2c5288b736ae8a30b184) Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-16 04:05:49 +0000