summaryrefslogtreecommitdiffstats
path: root/meta/classes/kernel-yocto.bbclass
Commit message (Collapse)AuthorAgeFilesLines
* kernel-yocto: checkout known branch before leaving do_validate_branchesBruce Ashfield2012-12-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | We should always leave the tree on a BSP branch or master when do_validate_branches completes to avoid modifying version tracked files are part of the build process. Modifying these files will lead to errors when changing branches, since the contents would be lost. This is evident in the case that a the meta branch is reset to a known SRCREV and the tree was left on the meta branch. This branch tracks the meta/meta-series, and other artifacts of the original tree construction. When the build process runs, it updates these same files, which creates a conflict when switching branches. This has been fixed in the tree construction scripts to not track these files, but a secondary fix is also required of not leaving the build on these branches, to allow arbitrary trees to be built. [YOCTO #3413] (From OE-Core rev: 57397592ff8ec16922604d398c18d53a589be41f) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-yocto: clarify KMETA branch commentsBruce Ashfield2012-11-221-2/+3
| | | | | | | | | | | | | | | | | | | | Having a meta branch is not strictly required by the tools (and recipes like linux-yocto-custom do not have meta branches), but the comments in the kernel-yocto.bbclass could lead someone to think that it was required. This commit clearifies the comment to the following: # We can fix up the kernel repository even if it wasn't a bare clone. # If KMETA is defined, the branch must exist, but a machine branch # can be missing since it may be created later by the tools. [YOCTO #3422] (From OE-Core rev: 421a2e2523a8f2c461479a1c0d44908cc1eaca6b) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-yocto: fix kernel configuration audit for custom yocto kernelsBruce Ashfield2012-09-141-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was reported that the kernel configuration checks for custom yocto kernels had the following output: NOTE: validating kernel configuration grep: /meta-series: No such file or directory grep: /meta-series: No such file or directory WARNING: Can't find any BSP hardware or required configuration fragments. WARNING: Looked at //cfg///hdw_frags.txt and //cfg///required_frags.txt in directory: //cfg// NOTE: Tasks Summary: Attempted 375 tasks of which 367 didn't need to be rerun and all succeeded. which is not inspire confidence in the output of the process. Completely inhibiting the check is one option to remove the messages, but that removes the ability see output, which can help move users to a better or more fully configured linux-yocto based kernel. To fix this, we have to ensure that the path to the meta-series is always valid, and that the tools can deal with not all files existing in the audit directory. Since custom yocto kernels do not set KMETA (they don't have a meta branch), we ensure that a default of 'meta' is passed to the audit ('meta' is always valid), and that kconf_check itself can deal with an incomplete set of input audit files. The net result is output like this (using a defconfig with invalid options for the kernel being built): NOTE: validating kernel configuration This BSP sets 19 invalid/obsolete kernel options. These config options are not offered anywhere within this kernel. The full list can be found in your kernel src dir at: meta/cfg/standard/qemux86/invalid.cfg There were 1 instances of config fragment errors. The full list can be found in your kernel src dir at: meta/cfg/standard/qemux86/fragment_errors.txt The full list can be found in your kernel src dir at: meta/cfg/standard/qemux86/missing_required.cfg (From OE-Core rev: 4d1b7dae063ee4c35c426306d0e22f11ce112c72) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: check for bad SRCREV before branch checksBruce Ashfield2012-09-041-7/+8
| | | | | | | | | | | | | | | | | | do_validate_branches ensures that the desired SRCREV is at the tip of every branch that contains the revision. To do this, it looks for containing branches and processes them. This processing was mistakenly placed before the check for an invalid SRCREV, hence a git error message is seen in the log if a bad SRCREV is used, rather than a clear message. reordering the checks, and fixing a check for master, ensures that clear messages are generated in all cases. (From OE-Core rev: 7e4518bf88af53b09536a3bafcd4c392a094023f) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: fix unapplied patch error messageBruce Ashfield2012-09-041-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | When patches fail to apply, the status of all pending patches should be exported to the logs and to the user. Currently, a missing export of GUILT_BASE makes it look more like an internal error, than a 'normal' patch failure: | [ERROR] unable to complete push | pending patches are: | Patches directory doesn't exist, try guilt-init With this variable exported, we have this: | [INFO] validating against known patches (qemux86-standard-meta) | error: patch failed: Makefile:2 | error: Makefile: patch does not apply | To force apply this patch, use 'guilt push -f' | [ERROR] unable to complete push | pending patches are: | links/files/0002-makefile-patch.patch (From OE-Core rev: b2b2512cbc4196fa0f814be3677517dab30e5b52) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-yocto: don't require meta branch for custom reposBruce Ashfield2012-08-251-2/+3
| | | | | | | | | | | | | | | | | | | The commit a9f11849 [linux-yocto: explicitly export KMETA to scripts] allows the meta branch name to be changed by exporting it to all phases of the build. But if a custom kernel without a meta branch is built, we end up passing an empty string to the creation scripts, which breaks the build since input is expected. Inhibiting the export of KMETA to the creation scripts when empty fixes the problem. (From OE-Core rev: 61162fbe01993659301fe2e821bf9c3e801206d8) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-yocto: set master branch to a defined SRCREVBruce Ashfield2012-08-251-4/+8
| | | | | | | | | | | | | | To support custom repositories that set a SRCREV and that only have a single master branch, do_validate_branches needs a special case for 'master'. We can't delete and recreate the branch, since you cannot delete the current branch, instead we must reset the branch to the proper SRCREV. (From OE-Core rev: de5bb5879fa3282c46dc1ede36af34eaab8f647f) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: explicitly export KMETA to scriptsBruce Ashfield2012-08-191-1/+4
| | | | | | | | | | | | | The kern-tools scripts can support a meta branch and directory of a name that isn't "meta", but they need the name passed through the environment variable KMETA. ensuring that KMETA is exported in the shell environment sets the stage to support flexible meta branch name. (From OE-Core rev: 9b90c8ace04c88ac6105f0bf686f9abc70fe8074) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: make KBRANCH the exception and not the ruleBruce Ashfield2012-08-191-26/+62
| | | | | | | | | | | | | | | | | | | | | The kernel branch is no longer required by the yocto-kern-tools to locate BSP feature descriptions (it is the MACHINE:KTYPE descriptor), so we no longer require that the BSP branch be explicitly set. If a kernel branch is explicitly set, it is now used to trigger a checks to ensure that the branch really is being built. Otherwise the branch that the machine description creates will be built (just as it always was). This further simplies the use and configuration of a linux-yocto based kernel recipe. (From OE-Core rev: 3cac3ce65abae9dc253641a2004440a2b38fd44d) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-yocto.bbclass: Delete superfluous creation of ${S}/.git directoryRobert P. J. Day2012-07-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | In do_kernel_checkout(), replace the creation of ${S}/.git with just the creation of ${S} since the .git subdirectory is created only a few lines later using a "mv". Here's the original code: rm -rf ${S} mkdir -p ${S}/.git echo "WARNING. ${WORKDIR}/git is not a bare clone." echo "Ensure that the SRC_URI includes the 'bareclone=1' option." # we can fix up the kernel repository, but at the least the meta # branch must be present. The machine branch may be created later. mv ${WORKDIR}/git/.git ${S} <-- See? There it is. There's no functional change here, it's just less confusing. (From OE-Core rev: f0d318177096a7a1c7406642663ae4ce28010d12) Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-yocto.bbclass: Fix some obvious typoes in comments.Robert P. J. Day2012-07-221-3/+3
| | | | | | | | (From OE-Core rev: 072476bb6468d984ae3246f478fd5b3a21f7c8d6) Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove a number of unneeded import os/bb callsRichard Purdie2012-07-191-1/+1
| | | | | | | | | | The bb and os modules are always imported so having these extra import calls are a waste of space/execution time. They also set a bad example for people copy and pasting code so clean them up. (From OE-Core rev: 7d674820958be3a7051ea619effe1a6061d9cbe2) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Convert tab indentation in python functions into four-spaceRichard Purdie2012-07-191-26/+26
| | | | | | (From OE-Core rev: 604d46c686d06d62d5a07b9c7f4fa170f99307d8) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kern-tools: add buildall and robustness fixesBruce Ashfield2012-06-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Updating the kern-tools SRCREV to pickup the following functionality: - buildall: provides the ability to build all kernel branches without a build system, only a cross compiler and configme are required. - robustness/cleanups: obselete/unused code removal and general robustness fixes from Paul Gortmaker and Bruce Ashfield The following kern-tools commits are part of this series: b8dfd3d buildall: add whitelist/blacklist support 0ef039c configme: catch errors found during fragment sanitization 5b6498c buildall: remove all instances of it using/reading scc files 2e57550 buildall: support semi seamless restarts 4b5dd4d kconf_check: simplify cmdline args, dont store data per branch 58fbb6e configme: relieve it of all knowledge of scc files a03e291 configme: strip out alternative meta series logic. 96d2bcf kgit-init: check for valid branchpoint 5598db6 buildall: allow a max cap on the number of builds done b46abec buildall: add support for randomizing build order 68a04e9 buildall: dont copy failed build logs into main build dir 5575d85 buildall: script to independently build all board kernels 86d6200 configme: delete unused variable 8d4e29d configme: delete unused KPROFILE setting 7e15436 configme: ensure we have a valid machine type set 152b9cb scc: remove depreciated/unused commands bb4e96a scc: allow includes within conditional statements 7da7951 configme: derive path to tools from $0 152dc45 configme: test for BUILD_DIR != "" 129f7b0 kgit-scc: add warnings about bad input args. e977662 kgit-scc: add text for no arg and invalid arg case. [YOCTO #843] (From OE-Core rev: be3cff86d55db6255e036d68e943e527802b4f4c) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* ccache: Separate out into its own classRichard Purdie2012-05-301-1/+1
| | | | | | | | | | | | | | Currently, ccache is used if it is present. When building from scratch it gives no performance improvement and creates a ton of empty directories even when its not in use. This change moves ccache support to a bbclass file which the user can choose to enable. This should make builds more determinstic and make it easier/clearer to the end user when its being used and when it is not. (From OE-Core rev: 2acf8da4f13c175ea818b9514677b7059de1e3e2) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-yocto: export GUILT_BASE to devshellBruce Ashfield2012-05-111-1/+2
| | | | | | | | | | | | | | | | One of the patch backends to linux-yocto is guilt, which normally tracks patches under .git. But .git isn't something that can be checked into a SCM and repeated. So it has been moved under meta/patches and committed to the meta branch. If devshell is used, GUILT_BASE isn't set, so patch manipulations will fail. We export GUILT_BASE and point it at the meta directory when devshell is invoked for linux-yocto. (From OE-Core rev: 10546e42a0db6a9585488536e29759239ef6e73b) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: streamline support for multiple upstream repo typesBruce Ashfield2012-05-081-55/+60
| | | | | | | | | | | | | | | | | | | | In order to support repositories of various types (with or without meta data, branched, pristine, custom, etc) information about the type of processing that is required was passed to the processing phases via variables. The combination of variables involved in coordinating the processing creates a learning curve and overly complicates recipe extensions. With minor tweaks to the kern-tools, adding flexibility and keying off the existence of the meta branch it is possible to remove all of the variables that were added to support different repository types. (From OE-Core rev: 06e5f45c8f38925cd5902a3a3f436f5e9451dd16) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: .diff is a valid patch extensionBruce Ashfield2012-04-171-1/+1
| | | | | | | | | | | | | | | | | In fixing an existing patch migration bug, the list of valid extensions got out of sync from the core patch class. As a result, valid patches were not being applied to the tree. Updating the tools to migrate .diff files fixes the issue. Also in this fix is the removal of .patch in the find_sccs() routine, since it will never be returned by patch.bbclass when all non-patches are requested, it is simply confusing. (From OE-Core rev: 0ade3f26f40b67d7296725b1e956c46be9a86089) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: allow .cfg, .scc, .patch and defconfigs to be processed in orderBruce Ashfield2012-04-131-67/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | During testing/extension of the linux-yocto-tiny kernel it was found that defconfigs were not always properly applied. This was due to two issues: - not being able to fully control the order of objects applied to the git tree on the SRC_URI - defconfigs triggering --allnoconfig before being applied To fix this, the recipe space code that previously detected and generated automatic features moves back to the kernel tools (where it was before) and is updated to also process .cfg and defconfigs. Moving this back to the tools allow other recipes to automatically benefit from the additional support. The second issue is addressed by allowing configme to take --alldefconfig when a recipe wishes to pass a defconfig and override the default behaviour. Fixes [YOCTO: 2250] (From OE-Core rev: 08c368b9980716e459d846dd7183940a5bf8bea4) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: support externalsrc buildsBruce Ashfield2012-03-281-0/+2
| | | | | | | | | | | | | | There are a few extra task that modify the source tree that should be removed when externalsrc is inherited by a recipe that uses a linux-yocto tree. Adding those tasks to SRCTREECOVEREDTASKS means that they are skipped and externalsrc works as intended. (From OE-Core rev: e3117fb15498c899282f25a195f3dd3dc889168c) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: respect FILESPATH directoriesBruce Ashfield2012-03-131-4/+26
| | | | | | | | | | | | | | | | During the work to enhance the ability to specify out of tree kernel features, an assumption was made about PN being part of a patch path. This assumption is incorrect, since patches can be anywhere in the valid FILESPATH. To make locating the patches in WORKDIR simple, we can just query patch.bbclass and return both the absolute directory of the patch and the subdirectory as it was specified on the src_uri. (From OE-Core rev: ecade4c986e5045879ea204e31457c9b53a15e33) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta: Replace bb.data.expand(xxx, d) -> d.expand(xxx)Richard Purdie2012-03-051-1/+1
| | | | | | | | sed \ -e 's:bb.data.\(expand([^,()]*\), *\([^) ]*\) *):\2.\1):g' \ -i `grep -ril bb.data.expand *` Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: make kernel_checkout reentrantBruce Ashfield2012-03-021-13/+20
| | | | | | | | | | | | | | | The steps in do_kernel_checkout modify the source tree in WORKDIR. If it is called multiple times, or interrupted, the tree is left in an inconsistent state. This change adds protections around branch names, and around the manipulations of directories to ensure that it is safe to call at any point. (From OE-Core rev: f937977f241e786c5a7438449ed4c9da4c55829b) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: allow non-branched repositories to check outBruce Ashfield2012-02-281-1/+1
| | | | | | | | | | | | | | Not all users of the checkout phase of linux-yocto have all branches present. This is normal, and should be supported. By checking for an empty KBRANCH we can avoid validating a branch that isn't supposed to exist. [YOCTO #2032] (From OE-Core rev: fb2b3c7c10df1b44679a20e7dffd37f07fd01aba) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: improve checkout error handling and reportingBruce Ashfield2012-02-241-23/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The typical workflow for linux-yocto simply uses a remote upstream repository (Whether it is mirrored or not), and in this case there are no issues with consistency in the format of the resository that is unpacked into the WORKDIR. When working with a local linux-yocto repository for kernel development the remote vs local branches is not always consistent between repositories. The suggested/documented workflow has always been to use a bare clone of linux-yocto, and use a second working tree repository for development. Changes flow from the working tree to the bare clone and then into the working directory for build. A common mistake that happens with this workflow is that the non-bare, working repository is used instead of the bare clone version. If a non-bare repository is reference by the SRC_URI, then the branches that are fetched into WORKDIR are not consitent. If the MACHINE and META branches are not present, cryptic build errors will result. To solve this problem, the checkout code has been changed in several ways: - works with a newly proposed 'bareclone' option to bitbake - detects if a bareclone is present in WORKDIR or not and adjustst the checkout accordingly. - if a non-bare clone is detected, machine and meta branches are checked. If they are not present, or can't be created a clear error message is produced - instead of manipulating the refs directly in the git tree, local tracking branches are (quietly) created for remote branches. Enabling a better workflow in the WORKDIR kernel repository. This has been tested with linux-yocto remote upstreams, local bare and non-bare respositories. All builds succeed or fail with clear error messages. (From OE-Core rev: e3b6537cc7931636ab11ae6ed2c8fbaad9da91bc) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: locate and use out of tree features specified on the SRC_URIBruce Ashfield2012-02-081-0/+21
| | | | | | | | | | | | | In a similar manner to calling the patch.bbclass to locate patches that were listed on the SRC_URI, it is also useful to query about 'other' items that are on the SRC_URI. In the case of linux-yocto, it allows us to know about kernel features that were specific on the URI and then apply them to the current tree. (From OE-Core rev: 3e2ce87566124db8c78472f9a4f00ab26410f213) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: restore WORKDIR as a patch source directoryBruce Ashfield2012-01-191-0/+2
| | | | | | | | | | | | In the switch to using src_patches and using patches in their source directory, the scanning of WORKDIR migrated items like config fragments was dropped. Adding WORKDIR back as a patch directory restores the old functionality. (From OE-Core rev: fd46d2ec75a53a02464ab2f0bc69eb1971432c9a) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: use src_patches for out of tree kernel feature supportBruce Ashfield2012-01-061-2/+65
| | | | | | | | | | | | | | | To support larger out of tree kernel features and enhanced patching schemes, this changeset modifies the linux-yocto patching routines to call the recently factored out 'src_patches' routine. Using the returned list of local URIs for all valid patches, the logic can then determine whether or not patches can be used in place, or need to be migrated and have re-usable kernel features created. The results are then fed to the existing infrastructure to be applied and commited to the tree. (From OE-Core rev: dca97bbdbfc88c91287e74eb6a3974277f1028b7) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: use PATH to locate kconf_checkBruce Ashfield2012-01-031-2/+2
| | | | | | | | | | | | The changes made to prefer in-tree kernel tools forced the location of kconf_check prematurely. For maximum flexibility, locating it on the PATH is ideal, since the transition to in-tree tools will be completely transparent. (From OE-Core rev: 68684b4903261cc5d3f48355f7cc6671484bb546) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-yocto: fix extra CR in do_kernel_checkoutSaul Wold2011-12-021-2/+1
| | | | | | | (From OE-Core rev: 405ac5f5e8604dec087c7d87056c8c7f85739a41) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: prefer in-tree tools to external onesBruce Ashfield2011-12-021-1/+11
| | | | | | | (From OE-Core rev: ae7b3c518020715dde8b9eabdf30c71430e31712) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-yocto: support allnoconfig base configurationBruce Ashfield2011-12-021-2/+13
| | | | | | | | | | | | | | | | | | | | When creating a minimal config or creating a hard baseline for incremental changes, it is often desired to disable all kernel options and then begin building and enabling only what is required. To support this workflow, a new variable KCONFIG_MODE is introduced to contain a hint to the kernel configuration about how the kernel config should be produced. This variable is passed directly to lkc when it is invoked during configuration, so the contents of the variable must be a valid option for the kernel config build. Additionally, when a defconfig is detected, allnoconfig is enabled as the default operation, unless otherwise specified by KCONFIG_MODE. (From OE-Core rev: 644f2e525b910b9ff8d9aaa33f11eba3fefa7c85) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Convert to use direct access to the data store (instead of bb.data.*Var*())Richard Purdie2011-11-101-1/+1
| | | | | | | | | | | | | | | | | This is the result of running the following over the metadata: sed \ -e 's:bb.data.\(setVar([^,()]*,[^,()]*\), *\([^ )]*\) *):\2.\1):g' \ -e 's:bb.data.\(setVarFlag([^,()]*,[^,()]*,[^,()]*\), *\([^) ]*\) *):\2.\1):g' \ -e 's:bb.data.\(getVar([^,()]*\), *\([^(), ]*\) *,\([^)]*\)):\2.\1,\3):g' \ -e 's:bb.data.\(getVarFlag([^,()]*,[^,()]*\), *\([^(), ]*\) *,\([^)]*\)):\2.\1,\3):g' \ -e 's:bb.data.\(getVarFlag([^,()]*,[^,()]*\), *\([^() ]*\) *):\2.\1):g' \ -e 's:bb.data.\(getVar([^,()]*\), *\([^) ]*\) *):\2.\1):g' \ -i `grep -ril bb.data *` (From OE-Core rev: b22831fd63164c4db9c0b72934d7d734a6585251) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: simplify kernel configuration check expressionBruce Ashfield2011-09-221-1/+1
| | | | | | | | | | | | | | | | | | | | | kernel configuration validation takes place between two files. An unprocessed configuration file (which is all the options found in the various configuration fragments) and the final .config produced by the lkc. The unprocessed configuration file's name historically is based on the name of the branch that was used to build the BSP. But with the ability to map machine names to arbitrary branches, this is no longer always true. Searching for the pattern *-config-* in the meta subdirectory will only match the config file, and frees the config validation phase from being concerned with what branch was used to build the BSP. (From OE-Core rev: 92e0d61f5bf15ca4eb262dfa3c533f9209a87915) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: generalize kernel config search patternBruce Ashfield2011-09-051-1/+1
| | | | | | | | | | | | | | | | After constructing a kernel configuration file it then needs to be located in the tree so it can be audited against the final .config. The previous string that was used for the search pattern contains the kernel version. If the recipe space kernel version and internal tree version are out of sync, this will cause the constructed config to not be found. By removing the version from the search string, we can still find out config and gracefully adapt to minor version skew. (From OE-Core rev: f072ddc43828ebe8df4dd7433726775dd547580b) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-yocto: add CCACHE_DIR dependency to do_kernel_configmeSaul Wold2011-08-081-0/+1
| | | | | | | | | | | | | [YOCTO #1350] Since do_kernel_configme is added before the standard do_configure task we needed to add CCACHE_DIR so when the kernel builds it's host configure tools the CCACHE_DIR exists. (From OE-Core rev: 564d5fd5a289be0ca47d53608e43f9b78d5c6ee0) Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: allow configuration of arbitrary branchesBruce Ashfield2011-08-081-12/+4
| | | | | | | | | | | | | | | | | | | When building an external tree or bootstrapping a BSP the external branch may not have been checked out. The tools now ensure that the tree is ready for configuration, so we no longer need to force the checkout of the external branch. This change is coupled with some kern tools tweaks as follows: 40d9bab updateme: allow the location of board descriptions based on defines 59859ca createme: use branch name when creating meta data 91b4275 configme: determine meta branch based on directories, not branch naming f5a915c kgit-meta: make branch creation and renaming more robust (From OE-Core rev: 02c82bf5255b09bb27a0a4509861a3d2bd84b09f) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: pass KMACHINE to updateme, not MACHINEBruce Ashfield2011-08-081-1/+1
| | | | | | | | | | | | To support the mapping of any oe/yocto MACHINE to a kernel branch that may not share that naming structure we have KMACHINE and KBRANCH. To allow the mapping to work, we actually have to pass KMACHINE into updateme and not MACHINE. (From OE-Core rev: 658f2cc721b121c0a9a9e7aa8b41463952314c0b) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel: copy defconfig to {B} vs {S}Bruce Ashfield2011-07-221-6/+0
| | | | | | | | | | | | | | | | | | | | | | | For kernel's that use a split source/object build the copy of defconfig to {S} in the base kernel class is problematic. The previous solution for this was to override the do_configure of the base kernel class in a subclass. While this is still a viable/valid option, it does mean that changes to the base do_configure will be missed. The solution to this is to copy a defconfig to {B} which is typically the same as {S}, so most kernel recipes won't see or care about this change. With this change in place, linux-yocto.bbclass can drop its override of do_configure. Tested with linux-yocto and oe linux recipes. (From OE-Core rev: 4f03d922ce32f602a5a407cf422d82a0d036e4a0) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-yocto: Fix case where recipe is always reparsedRichard Purdie2011-07-071-1/+1
| | | | | | | | | | | | | | | | If you include a bitbake variable as a comment in a shell function then it gets expanded by the bitbake signature handling code. This could be classed as a bug or a feature depending on your viewpoint (e.g. a multiline variable included in a comment could actually contain executable code). Since we don't always want kernel-yocto to reparse this changes the syntax of the comment so it doesn't trigger the problem. (From OE-Core rev: 512be74ee0d7ad7e76c1be62d1e0f499aa51d174) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: detect and avoid branch revision checking for AUTOREVBruce Ashfield2011-05-171-0/+7
| | | | | | | | | | | | | | | When a BSP or layer specifies an AUTOREV for SRCREV, the logic that matches expected vs real branch heads doesn't apply. We always want the latest. To solve the issues with invalid git revs causing validation failures, we detect the AUTOINC value and do a early return, skipping validation. (From OE-Core rev: b4f1845f7cf42059984112e3f41a323b4c9d6dfd) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: error if meta data not presentBruce Ashfield2011-05-101-1/+4
| | | | | | | | | | | | | | | | | | | | There are valid reasons to build repositories without meta data present and there are times when this is an error. This change adds sanity tests to the build process to detect missing meta data and throw an informative error message. Sanity checking is only triggered from recipes (linux-yocto) that always require meta data to be present. Other recipes are not impacted and can auto-generate meta data as required. Without this change the build process suceeds, but incorrect meta data will be used (with no user knowledge), which is not the desired behaviour. (From OE-Core rev: adf9f92e2f8f6cc3deba72a194ded85e160ad9e3) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: safely process unbranched repositoriesBruce Ashfield2011-05-051-2/+5
| | | | | | | | | | | | | | The BSP bootstrap and -dev use cases can be applied against unbranched or repos without meta data. To allow the proper and safe processing of those repositories, slight modifications to the tools are required to pass the branch on the command line (rather than detecting it always) and to only checkout branches that exist. (From OE-Core rev: ae754be8b43677604a853ec6f62b2490a91d8836) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: apply meta data to external reposBruce Ashfield2011-05-051-6/+21
| | | | | | | | | | | | | | To support quick uprev and testing, it is desireable to build repositories that do not have embedded meta data. In this scenario the meta data can be automatically created or provided externally. This commit supports the first situation by detecting the lack of meta data and then automatically creating a base set of meta files. (From OE-Core rev: 32c56cd6a5756f21d19d8a32239b783a7854aed3) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: enable audio for selected qemu targetsBruce Ashfield2011-02-231-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes [BUGID #488 #734] Enable audio for qemux86/qemux86-64 via the following kernel configuration options. CONFIG_SOUND_OSS_CORE=y CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND_RAWMIDI=m CONFIG_SND_SEQUENCER=y CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_RAWMIDI_SEQ=m CONFIG_SND_AC97_CODEC=m CONFIG_SND_ENS1370=m CONFIG_SND_INTEL8X0=m CONFIG_AC97_BUS=m The mechanism to trigger these options is in the form of an optional kernel feature that is only appended for qemux86 and qemux86-64, but is contained within the kernel tree. This allows several things: - the options to be available/shared for all boards - the options to be in tree - to not add the options to every board, which unecessarily bloats the default configuration. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* linux-yocto: streamline BSP bootstrappingBruce Ashfield2011-02-091-61/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to build BSPs that were not already integrated into the upstream linux yocto kernel AND keep the git fetcher happy, some fairly complex anonymous python sections were required. These sections cause problems with variable expansion and SRCREV processing. With the updated git fetcher code, we can streamline the BSP boostrapping process and drop 99% of the anonymous python code. This commit has the following changes to support BSP boot strapping and simplication for existing BSPs. - KMETA is set per-recipe rather than in python code - undefined machines are no longer used, but instead common branch names are set per-recipe - fallback machine SRCREVs are present in the default revisions file - A new variable YOCTO_KERNEL_EXTERNAL_BRANCH should be set in the local.conf for new BSPs instead of being programatically determined in the anonymous python. - No more explicity KMACHINE variable expansion and manipulation, since the tools and build phases no longer require it due to the per-recipe fallbacks. Integrated/merged BSPs are unaffected by the changes and have been regression tested. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> foo Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* kernel-yocto: Ensure python code has awlays run before SRCPV is expandedRichard Purdie2011-02-081-2/+9
| | | | | | | | | | | | | The python code in this class file needs to run before SRCPV is expanded and calls into the fetcher are made. To so this we create a python function and prepend a call to it before SRCPV's get_srcrev() call. Ugly, ugly, ugly but the ordering is guaranteed. If this doesn't happen, the fetcher can end up in two different states and there may be caching implications of this. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-yocto/poky-default-revisions: Ensure SRCREV_machine is set for the ↵Richard Purdie2011-02-081-1/+0
| | | | | | | | | kernels If we don't do this and try to bring up a new machine we can trigger network access to resolve the branch name to a revision which is undesireable. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-yocto: 'standard' isn't a valid git branch name for a SRCREV, fixRichard Purdie2011-02-071-1/+1
| | | | Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto/linux-libc-headers-yocto: Adjust to git fetcher improvementsRichard Purdie2011-02-021-2/+2
| | | | Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-14 09:58:13 +0000