summaryrefslogtreecommitdiffstats
path: root/meta/classes/externalsrc.bbclass
Commit message (Collapse)AuthorAgeFilesLines
* externalsrc: always set SRCPVAlexander Kanavin2019-12-281-3/+2
| | | | | | | | | | | | If devupstream is in use by the recipe, then that variant has SRCPV, but the main variant may not, in which case bitbake throws an expansion error. (From OE-Core rev: 740e3f5e1d4a8abb07c7a4e4aedd804d679c7562) Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc: stop rebuilds of 2+ externalsrc recipes sharing the same git repoQuentin Schulz2019-09-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | externalsrc do_configure task watches oe-devtool-tree-sha1 file and its checksum. That file basically contains the result of `git add -A ${EXTERNALSRC} && git write-tree` which is the hash of temporary "commit" of the non committed changes. This file is stored in the .git directory of the git repo of the externalsrc recipe. do_configure then depends on the checksum of oe-devtool-tree-sha1 file. If 2+ recipes with different externalsrc paths but same git repo (e.g. one recipe at /some/path and the other at /some/path/subdir) are parsed, this oe-devtool-tree-sha1 will be overwritten by those recipes at parsing time since .git is shared between those recipes. If there is one non committed git change in /some/path but not in /some/path/subdir, the oe-devtool-tree-sha1 of both recipes will be different. What will happen is that recipe1 will watch over the oe-devtool-tree-sha1 with a specific checksum, fill in file-checksums for do_configure correctly, then recipe2 will watch over the identically named file with different content also fill in the file-checksums varflag. When do_configure of recipe1 will be evaluated for re-execution, oe-devtool-tree-sha1 will be of the value of what is watched over by recipe2, thus triggering a rebuild of recipe1. This behavior is not always reproducible which I'm guessing is due to a small window between recipe1 putting info into oe-devtool-tree-sha1 and calculating the checksum of that file and recipe2 putting its content into oe-devtool-tree-sha1. By appending the name of the recipe to oe-devtool-tree-sha1, we make sure that a recipe won't have its oe-devtool-tree-sha1 overwritten by another recipe sharing the same externalsrc git repo. (From OE-Core rev: 1b727dd7295a7a7fe17800f8038242efbf7fe2b7) Signed-off-by: Quentin Schulz <quentin.schulz@streamunlimited.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc.bbclass: Set BB_DONT_CACHE for non-target recipesOla x Nilsson2018-10-081-2/+2
| | | | | | | | | | | BB_DONT_CACHE was not set for non-virtual recipes where PN != BPN, such as quilt-native. Recipes that do not set BBCLASSEXTEND should always have BB_DONT_CACHE set by externalsrc. (From OE-Core rev: 4eff427a0ee629a1541a420a9591411648569a97) Signed-off-by: Ola x Nilsson <olani@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc.bbclass: don't configure with --disable-dependency-trackingAndre McCurdy2018-05-291-0/+3
| | | | | | | | | | | | | One of the uses of externalsrc is to enable iterative editing and rebuilding of source files during development. In such situations, disabling Automake dependency tracking can lead to sources not being rebuilt even though files they depend on have been modified. (From OE-Core rev: af2f802d5b59203a887982af83252565b8078085) Signed-off-by: Andre McCurdy <armccurdy@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/externalsrc: ensure cleandirs code handles non-absolute pathsPaul Eggleton2018-04-051-1/+2
| | | | | | | | | | | | | | | | It's possible that a trailing or extra slash somewhere in the external source path could result in the directory not being removed from cleandirs; it's also possible that a cleandirs entry is somewhere underneath the source tree and that tree should never have parts of it deleted by the build system. Use oe.path.is_path_parent() (which makes paths absolute before checking them) to find out if any path in cleandirs is anywhere underneath the external source path, and drop it if it is. (From OE-Core rev: 87ec0fb470274d980f8553a85f778809c269c5d7) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/externalsrc: handle if cleandirs contains python expressionsPaul Eggleton2018-04-051-1/+3
| | | | | | | | | | | | | | Use the existing oe.recipeutils.split_var_value() function to split the unexpanded value of the cleandirs varflag, in case it contains python expressions - we don't want to split the expression itself as the chunks will not expand properly individually and we can miss something that expands to the source tree (and thus it can get deleted, the avoidance of which is the whole point of this code). (From OE-Core rev: 611cee69d7300a4746edd752c9557af60e7beecc) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc: do not call make clean for recipes with CLEANBROKEN = "1" setAndreas Müller2018-03-251-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | ERROR: distrho-ports-0.0.0+git999-r0 do_buildclean: oe_runmake failed ERROR: distrho-ports-0.0.0+git999-r0 do_buildclean: Function failed: do_buildclean ERROR: Logfile of failure stored in: <...>/temp/log.do_buildclean.17285 Log data follows: | DEBUG: Executing shell function do_buildclean | NOTE: make clean | make clean -C libs/drowaudio | make[1]: Entering directory '/home/a.mueller/data/oe-core/workspace/sources/distrho-ports/libs/drowaudio' | make clean -C build-drowaudio | make[2]: Entering directory '/home/a.mueller/data/oe-core/workspace/sources/distrho-ports/libs/drowaudio/build-drowaudio' | make[2]: *** No rule to make target 'clean'. Stop. | make[2]: Leaving directory '/home/a.mueller/data/oe-core/workspace/sources/distrho-ports/libs/drowaudio/build-drowaudio' | make[1]: *** [Makefile:7: clean] Error 2 | make[1]: Leaving directory '/home/a.mueller/data/oe-core/workspace/sources/distrho-ports/libs/drowaudio' | make: *** [Makefile:73: clean] Error 2 | ERROR: oe_runmake failed (From OE-Core rev: 21fa28d8faf33b2717e38886352238dd360ef346) Signed-off-by: Andreas Müller <schnitzeltony@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc.bbclass: Suppress git errorsJoshua Watt2018-02-161-1/+1
| | | | | | | | | | | Suppress any warnings git might generate when searching for a valid git directory, as there are use cases where the directory is expected to not exist and the warning is superfluous (From OE-Core rev: 66011996e1a8b738b31466fccad9973f8b48f71d) Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc: fix ExpansionError if the source dir does not exist yetLuca Ceresoli2017-11-081-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The externalsrc class code assumes that the source directory (EXTERNALSRC) exists before bitbake is called. Otherwise do_configure will fail obviously since externalsrc does not fetch anything. Commit 3ca6085729d9 ("externalsrc: Handle .git not being a directory") changed this behaviour. Now on a missing EXTERNALSRC directory we get a bb.data_smart.ExpansionError during _parsing_, way before do_configure can be run. This new behaviour creates two problems: * First, there error message is very cryptic (and it's hard to provide a better message since no task is ever run): ERROR: ExpansionError during parsing /<...>/<...>.bb Traceback (most recent call last): bb.data_smart.ExpansionError: Failure expanding variable do_compile[file-checksums], expression was ${@srctree_hash_files(d)} which triggered exception FileNotFoundError: [Errno 2] No such file or directory: '<...>' * Second, this prevents creating a class based on externalsrc that automatically fetches the code in EXTERNALSRC before do_compile runs. Fix both problems by simply calling git with '-C ${EXTERNALSRC}' instead of calling git inside the non-existing directory. This changes from a bb.data_smart.ExpansionError to a subprocess.CalledProcessError, which is in line with what's actually going on: git is telling us it can't find the git dir. Also remove a comment that does not apply anymore. (From OE-Core rev: 8e8251582e977d7c6ab525ac1b493fbbe3af38b2) Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Joshua Watt <jpewhacker@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/externalsrc: delete symlinks at start of do_buildcleanPaul Eggleton2017-09-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | To help users find the work and log directories (especially within the eSDK) we create symlinks to these from the source tree. However during do_buildclean we call "make clean", and some project Makefiles which delete something like "*/*/lib" which will match files underneath the oe-workdir symlink and fail. do_buildclean is called from do_clean which is in turn called by devtool reset by default, and thus devtool reset is blocked. An example of a recipe where this is visible is the openssl-qat recipe in meta-intel. In order to fix this, delete the symlinks at the start of do_buildclean since we shouldn't need them at that point anyway, and thus make clean won't be able to trip over them. Fixes [YOCTO #11036]. (From OE-Core rev: 927b3b05a7f6b85967f7375b1942605fe8d37d0c) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc: Handle .git not being a directoryJoshua Watt2017-08-161-3/+11
| | | | | | | | | | | | Use git rev-parse to determine the location of the .git directory, in case it is not an immediate child of EXTERNALSRC (e.g. when using submodules). In the event git can't resolve the .git directory, fall back to the non-git method for hashing. (From OE-Core rev: 95e1341b49f7184d280a03f64f131a4468a06867) Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc: place copy of git index into /tmp and do not use copyfile2Enrico Scholz2017-07-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using shutil.copy2() to copy .git/index to a temporary file tries to copy SELinux attributes which might fail for confined users in SELinux environments. E.g. our builders are running in docker containers and modification of sources (inclusive updated of .git/index) is done outside. Trying to copy .git/index fails with | $ python3 -c 'import shutil; shutil.copy2("index", "a")' | ... | PermissionError: [Errno 13] Permission denied: 'a' and an AVC like | denied { relabelto } for pid=18043 comm="python3" name="a" dev="dm-29" ino=1067553 scontext=system_u:system_r:container_t:s0:c39,c558 tcontext=unconfined_u:object_r:build_file_t:s0 tclass=file permissive=0 is created. This can not be solved by adapting the SELinux policy because this is a very deep constraint violation: | constrain file { create relabelfrom relabelto } ((u1 == u2 -Fail-) or (t1 == can_change_object_identity -Fail-) ); Constraint DENIED | | Possible cause is the source user (system_u) and target user (unconfined_u) are different. I do not see much sense in using 'shutil.copy2()' here; 'shutil.copyfile()' seems to be a better choice (target file is created in a secure way by tempfile.NamedTemporaryFile()). By placing the tempfile into /tmp we avoid potential problems related to git's 'core.sharedRepository'. As a (positive) side effect, the source tree will not be modified anymore (at least by this part of code) which prevented to mount it read-only from somewhere else. (From OE-Core rev: 3c3c8ecc61dfed68987750d79b5482ab2f6fa02f) Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc: verify that EXTERNALSRC/EXTERNALSRC_BUILD are absolute pathsRoss Burton2017-06-141-1/+6
| | | | | | | | | If these are set to URLs then the errors produced are not helpful. (From OE-Core rev: 946b6623154e748a0d75ff498802a720aeec27a6) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc: Use git add -A for compatibility with all git versionsRichard Purdie2017-03-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | I've been debugging a selftest failure on Centos7. The problem turns out to be the elderly git version (1.8.3.1) on those systems. It means that the system doesn't correctly checksum changed files in the source tree, which in turn means do_compile fails to run and this leads to the following selftest failure: ====================================================================== FAIL [141.373s]: test_devtool_buildclean (oeqa.selftest.devtool.DevtoolTests) ---------------------------------------------------------------------- Traceback (most recent call last): File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta/lib/oeqa/selftest/devtool.py", line 530, in test_devtool_buildclean assertFile(tempdir_mdadm, 'mdadm') File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta/lib/oeqa/selftest/devtool.py", line 497, in assertFile self.assertTrue(os.path.exists(f), "%r does not exist" % f) AssertionError: False is not true : '/tmp/devtoolqag88s39z8/mdadm' does not exist The solution is to use -A on the git add commandline which matches the behaviour in git 2.0+ versions and resolves the problem. (From OE-Core rev: 964e8b8cae4b28e21ade12b5effb494e459b1f0f) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc: Hide created symlinks with .git/info/excludeOla x Nilsson2017-01-311-1/+16
| | | | | | | | | | | Add created symlinks to the exclude file. This will both make them less distracting and hide them from the srctree_hash_files function. (From OE-Core rev: c11fcd6fbde4a90913960b223451e0ce9e6b4b64) Signed-off-by: Ola x Nilsson <olani@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc.bbclass: Add task buildcleanOla x Nilsson2017-01-161-1/+18
| | | | | | | | | | | | | | | | | | The buildclean task should call the package build system clean command, just implemented for Make for now. This is meant for recipes where S == B, but can be useful as a standalone task for other recipes too. When S == B, set it to run before do_clean which will do what most developers expect when calling bitbake -c clean. For S != B, do not add it before clean as it is not needed and may take some time. (From OE-Core rev: cfaad320d9565003e97893efcb14d00d0b8e23bb) Signed-off-by: Ola x Nilsson <olani@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc: Add optional srcdir arg to srctree_hash_filesOla x Nilsson2017-01-091-3/+3
| | | | | | | | | | Make it easier to reuse the function for other dirs than EXTERNALSRC. (From OE-Core rev: 9ddcfb51e637acba82089da6430ac77e29f0f1ef) Signed-off-by: Ola x Nilsson <ola.x.nilsson@axis.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc: Set STAMPCLEAN to match STAMPOla x Nilsson2017-01-091-0/+1
| | | | | | | | | | | Only the last stamp file should be kept, but unless STAMPCLEAN matches files generated using STAMP old stamp files may linger. This may cause false positives for skipping tasks. (From OE-Core rev: 6d60f60e38e0e00e6753f5b136277f27d6204e63) Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta: remove True option to getVarFlag callsJoshua Lock2016-12-161-1/+1
| | | | | | | | | | | | | | | getVarFlag() now defaults to expanding by default, thus remove the True option from getVarFlag() calls with a regex search and replace. Search made with the following regex: getVarFlag ?\(( ?[^,()]*, ?[^,()]*), True\) (From OE-Core rev: 2dea9e490a98377010b3d4118d054814c317a735) Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* meta: remove True option to getVar callsJoshua Lock2016-12-161-19/+19
| | | | | | | | | | | | | getVar() now defaults to expanding by default, thus remove the True option from getVar() calls with a regex search and replace. Search made with the following regex: getVar ?\(( ?[^,()]*), True\) (From OE-Core rev: 7c552996597faaee2fbee185b250c0ee30ea3b5f) Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/externalsrc: re-run do_configure when configure files changePaul Eggleton2016-10-111-0/+22
| | | | | | | | | | | | | | | | | | If the user modifies files such as CMakeLists.txt in the case of cmake, we want do_configure to re-run so that those changes can take effect. In order to accomplish that, have a variable CONFIGURE_FILES which specifies a list of files that will be put into do_configure's checksum (either full paths, or just filenames which will be searched for in the entire source tree). CONFIGURE_FILES then just needs to be set appropriately depending on what do_configure is doing; for now I've set this for autotools and cmake which are the most common cases. Fixes [YOCTO #7617]. (From OE-Core rev: 923fc20c2862a6d75f949082c9f6532ab7e2d2cd) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc.bbclass: Make reparsing work for BBCLASSEXTENDed recipesPeter Kjellerstedt2016-09-201-3/+17
| | | | | | | | | | | | | | | | | To make sure changes to any source files are detected when externalsrc is used, it sets BB_DONT_CACHE to force the recipe to be reparsed every time. Previously, this was done conditionally based on whether EXTERNALSRC was set. This worked fine for building the base recipe. But if one tried to build, e.g., a native version of it (provided via BBCLASSEXTEND), the recipe would not be reparsed as expected. To solve the above problem, BB_DONT_CACHE is now set for the base recipe if EXTERNALSRC is set for it or any of it derivatives. (From OE-Core rev: 449a0b21255d895e8620383ce76a9d7ea41b5cc6) Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/lib: Update to use python3 command pipeline decodingRichard Purdie2016-06-021-1/+1
| | | | | | | | | | | In python3, strings are unicode by default. We need to encode/decode from command pipelines and other places where we interface with the real world using the correct locales. This patch updates various call sites to use the correct encoding/decodings. (From OE-Core rev: bb4685af1bffe17b3aa92a6d21398f38a44ea874) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc: avoid race in temporary git index fileMarkus Lehtonen2016-04-061-8/+9
| | | | | | | | | | | | | Use a unique tempfile as the temporary git index file when determining the git hash of the source tree. A fixed filename was obviously causing races (with the git index.lock file) under oe-selftest where multiple bitbake instances were run against the same source tree at the same time. (From OE-Core rev: f81c641022c26a9b89fac769e0f2889eaec5d32f) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc: remove nostamp from do_configureMarkus Lehtonen2016-03-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Extend the srctree_hash_files() function in externalsrc.bbclass to handle non-Git source trees. If the source tree is not a git repository, srctree_hash_files() now simply adds the whole source tree as a dependency, causing bitbake to basically hash every file in it. Hidden files and directories in the source tree root are ignored by the glob currently used. This has the advantage of automatically ignoring .git directory, for example. During the first bitbake run preparing of the task runqueue may take much longer if the source tree is not a git repository. The reason is that all the files in the source tree are hashed. Subsequent builds are not significantly slower because (most) file hashes are found from the cache. [YOCTO #8853] (From OE-Core rev: a797abe08bfe4144e120c984d1718c2cc3d87c0a) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc: do not use do_configure[nostamp] for git srctreesMarkus Lehtonen2016-03-281-2/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Be a bit more intelligent than mindlessly re-compiling every time. Instead of always using 'nostamp' flag for do_compile run a python function to get a list of files to add as 'file-checksums' flag. The intention is to only re-run do_compile if something in the source tree content changes. This python function, srctree_hash_files(), works differently, depending if the source tree is a git repository clone or not. If the source tree is a git repository, the function runs 'git add .' and 'git write tree' to get a hash of the working tree and writes this hash into a file under the .git directory. This file containing the hash is then returned as the file for the task to depend on. Hash is changed if any changes are made in the source tree causing the task to be re-run. A trick is used to parse the recipe every time so that the hash file gets updated. If the source tree is not a git repository behaviour remains the same. In this case srctree_hash_files() currently sets the 'nostamp' flag for do_compile causing it to be re-run every time. This method of tracking changes source tree changes to determine if re-build is needed does not work perofectly, though. Many packages are built under ${S} which effectively changes the source tree causing some unwanted re-compilations. However, if do_compile of the recipe does not produce new/different artefacts on every run (as commonly is and should be the case) the re-compilation loop stops. Thus, you should usually see only one re-compilation (if any) after which the source tree is "stabilized" and no more re-compilations happen. [YOCTO #8853] (From OE-Core rev: a26becdf981b35d7ef8524f9e65c25a74b842f1d) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc: use shared stamp directory if B=SMarkus Lehtonen2016-03-201-6/+4
| | | | | | | | | | | | | | | | | | | | | | | We have a common build directory for all target architectures if externalsrc is used and ${B}=${S}. In this case we also need to have a common stamp directory. The reason is that e.g. changing MACHINE will basically "invalidate" the artefacts in ${B} (wrt. to the new MACHINE) but old stamp files with matching hashes from an earlier build might be available in the machine-specific stamps directory and tasks would not be correctly re-run. Previous attempt in f44f12af346888bdeb3ae01a275cb5dd4396b505 to handle this correctly was faulty as it threw some spurious warnings and caused do_configure to be re-run in every build if that would not be necessary. [YOCTO #8950] [YOCTO #9237] (From OE-Core rev: f5031fb37ceef83c85f0dfec773da75c05b2a631) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/externalsrc: fix symlinking if symlink exists pointing to another pathPaul Eggleton2016-03-021-0/+1
| | | | | | | | | | | If the oe-workdir / oe-logs symlink exists and points to a different path then the symlink needs to be removed before calling os.symlink() or it'll fail. (From OE-Core rev: cb8f064e48c24dcb1a15a32cef3399f35e549bdc) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/externalsrc: create symlinks for workdir and logsPaul Eggleton2016-02-111-0/+20
| | | | | | | | | | | | | | Auto-create symlinks in the source directory to the work directory (${WORKDIR}) and logs directory (${T}) so that they are easier for the user to find. This is particularly useful within the extensible SDK where the user is less likely to be familiar enough with the structure of the build system to know where to find these things, but otherwise they are a useful shortcut for anyone. (From OE-Core rev: 58adb3904c18acefd0da319e32f66ebca72eeaac) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/externalsrc: disable rm_work when activePaul Eggleton2016-02-111-0/+3
| | | | | | | | | | | If you're using externalsrc, it's very likely that you're going to want to examine the intermediate build results even if the recipe builds successfully; therefore you won't want rm_work to delete those. (From OE-Core rev: c0867a425166086624bcffa231a1497291f860cb) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/lib: Add expand parameter to getVarFlagRichard Purdie2016-02-041-1/+1
| | | | | | | | | | | | | | | | This sets the scene for removing the default False for expansion from getVarFlag. This would later allow True to become the default. On the most part this is an automatic translation with: sed -e 's:\(\.getVarFlag([^,()]*, [^,()]*\)):\1, True):g' -i `grep -ril getVar *` In this case, the default was False, but True was used since in most cases here expansion would be expected. (From OE-Core rev: 42a10788e89b07b14a150ced07113566cf99fcdd) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc: use shared CONFIGURESTAMPFILE if B=SMarkus Lehtonen2016-01-311-0/+11
| | | | | | | | | | | | | | | | | | External source tree is used as the builddir even for different architectures in case ${B}=${S}. This may cause problems if MACHINE is changed as do_configure is not being re-run (which would run make clean). This patches changes externalsrc to use a common (per-recipe) CONFIGURESTAMPFILE under 'work-shared' if ${B}=${S}. In addition, do_configure will depend on changes of this stamp file. As a result, do_configure is re-run and the build dir is cleaned correctly if a rebuild for different MACHINE is done. [YOCTO #8950] (From OE-Core rev: f44f12af346888bdeb3ae01a275cb5dd4396b505) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/externalsrc: fix setting of deps varflag as a stringPaul Eggleton2015-09-231-1/+2
| | | | | | | | | | | | The value of the deps varflag for tasks is (unusually) expected to be a list object rather than a space-separated string, hence we cannot use appendVarFlag() here. This fixes a traceback when parsing the gcc recipe with externalsrc enabled, for example. (From OE-Core rev: 47c1ff11a9b8b1e9f40ffb2b3d387252200cf0ec) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/externalsrc: scale back warning to a plain notePaul Eggleton2015-09-231-1/+1
| | | | | | | | | | | | | | It turns out that there are folks out there who use externalsrc in normal builds and don't really need to be warned; additionally within the extensible SDK or when using devtool, it shouldn't be a warning situation. Thus, scale it back to a note (we can't use bb.note() here since that wouldn't actually be piped through to the bitbake UI). Also touch up the message a little bit. (From OE-Core rev: 87bedd137a77c5ac0033a1de4587c40dbe93e81d) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc.bbclass: better filtering of cleandirsMarkus Lehtonen2015-09-121-11/+7
| | | | | | | | | | | | | | We really do not want our (external) source tree to be removed. There might be multiple values in the 'cleandirs' varflag pointing to our source tree - causing it to be wiped out. This patch improves the filtering of 'cleandirs' by examining the expanded values inside it. Any (expanded) values pointing to our source tree get removed. (From OE-Core rev: eec871fe405e140a1919999fe2f4cf24f1839e5d) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* extrernalsrc.bbclass: treat kernel meta like local sourceMarkus Lehtonen2015-09-091-4/+8
| | | | | | | | | | | | | | | Kernel metadata repository needs to be fetched/unpacked into the work directory in order to build the kernel. Sources pointing to a remote location are skipped by externalsrc by default which caused kernel build to fail (because of remote kernel-meta was not made availeble). This patch will make kernel-meta always available. [YOCTO #6658] (From OE-Core rev: b746280c955f48835d119f3fe637876faae6df97) Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/externalsrc: handle tasks with existing lockfilesPaul Eggleton2015-06-181-1/+1
| | | | | | | | | | | | We need to ensure we add a leading space to the value we are prepending here in case lockfiles already has a value. Fixes [YOCTO #7813]. (From OE-Core rev: d1b3b384754089e62f6a4c7964690ae6c8d20a96) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/externalsrc: fix for recipes that fetch local filesPaul Eggleton2015-03-201-1/+13
| | | | | | | | | | | | If SRC_URI contains local files (file:// references) these will almost certainly be required at some point during the build process, so we need to actually fetch these to ${WORKDIR} as we would normally. (From OE-Core rev: f223ad3d5b5c90055e50d1b1be69230f55e06336) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/externalsrc: show a warning on compilingPaul Eggleton2015-02-231-0/+6
| | | | | | | | | | | | Make sure there's no chance of anyone forgetting they have a recipe set up for externalsrc; otherwise you could get confused about what is going on. (With our default logging setup we can't make it a note because the UI doesn't forward those; otherwise I would have used bb.note().) (From OE-Core rev: 7b73473bc9d19331a103cf4958059d3ceb84b486) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/externalsrc: add workaround for recipes that use SRCPV in PVPaul Eggleton2015-02-231-0/+4
| | | | | | | | | | | | | | | | | Here we set SRC_URI to blank, however doing so means that the function that is called when you expand the default value of SRCPV (i.e. bb.fetch2.get_srcrev()) will fail, so any recipe that references SRCPV in PV couldn't previously be used with externalsrc. (At some point we may fix the function to work in the externalsrc case, but then we would also need to ensure that ${B} did not change as a result of PV changing any time the HEAD revision changes in the external source tree, or you'll lose any intermediate build artifacts.) (From OE-Core rev: 26f8060c3475ec988194b2163e422ba4e776fd8b) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/externalsrc: fix source being wiped out on clean with kernelPaul Eggleton2015-02-231-0/+14
| | | | | | | | | | | | | kernel.bbclass adds ${S} do do_clean[cleandirs], but this means if you run bitbake -c clean <kernelrecipe> then your external source tree will be trashed, which could be a disaster. For safety, remove ${S} from cleandirs for every task. We also have to do the same for ${B} in the case where EXTERNALSRC_BUILD is set to the same value as EXTERNALSRC. (From OE-Core rev: b5071fb2667b8751885d38ca62fa36c870177cd5) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/externalsrc: set do_compile as nostampPaul Eggleton2014-12-231-0/+3
| | | | | | | | | | | | | | Most of the time what you want when using this class is for do_compile to execute more than just once - every time the source changes would be ideal, but that's a little tricky to accomplish. Thus, set do_compile as nostamp to get something close. Note that in order to be effective this also requires the change to bitbake that causes nostamp task signatures to change on each execution. (From OE-Core rev: e734e12fd1478cdacdadf4e0fae5247cb70b9fb1) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc: Fix deltask usageRichard Purdie2013-12-211-1/+1
| | | | | | | | | An incorrect version of the patch merged which entirely removed the covered variable. This corrects the patch so the code works. (From OE-Core rev: 33874f9af895757c4b0fd2f4d350ed308edac03c) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc: Use deltask APIRichard Purdie2013-12-201-18/+3
| | | | | | | | | | Now we have deltask API, stop poking around bitbake internal variables. (From OE-Core rev: 98637df0c04fd14b506d9eec7da8ec6ae441221b) (From OE-Core rev: 3aa30ca04752c6366a81db6ff99209fa0b46861c) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* classes/externalsrc: enable global inherit and simplify usagePaul Eggleton2013-06-181-18/+33
| | | | | | | | | | | | | This class can now be inherited globally using INHERIT += rather than needing to inherit it in the recipe itself. Additionally, instead of setting S (and optionally B), set EXTERNALSRC (and optionally EXTERNALSRC_BUILD) to point to the external source and build locations respectively. (From OE-Core rev: b1da10579a28f9a5260a0678f6f15ce4b5a2706c) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* externalsrc.bbclass: Add class for handling external source treesRichard Purdie2012-03-011-0/+53
This is loosly based upon srctree.bbclass from OE-Classic but with some changes appropriate to OE-Core. (From OE-Core rev: bdb341953ba7d8299cba4d49d857107fb7b01e5b) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-11-14 20:22:38 +0000